mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-27 01:53:12 -04:00
ee31621316cc20108eb2075de5d57f2cbd295677
15496 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
|
ce0478b02e |
Merge tag 'v6.18-rc6' into drm-next
Linux 6.18-rc6 Backmerge in order to merge msm next Signed-off-by: Dave Airlie <airlied@redhat.com> |
||
|
|
ac9f4f306d |
Merge tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe: - Use the actual segments in a request when for bvec based buffers - Fix an odd case where the iovec might get leaked for a read/write request, if it was newly allocated, overflowed the alloc cache, and hit an early error - Minor tweak to the query API added in this release, returning the number of available entries * tag 'io_uring-6.18-20251113' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring/rsrc: don't use blk_rq_nr_phys_segments() as number of bvecs io_uring/query: return number of available queries io_uring/rw: ensure allocated iovec gets cleared for early failure |
||
|
|
6a77267d97 |
io_uring/query: return number of available queries
It's useful to know which query opcodes are available. Extend the structure and return that. It's a trivial change, and even though it can be painlessly extended later, it'd still require adding a v2 of the structure. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
|
e811c33b1f |
Merge tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel
Pull drm fixes from Dave Airlie: "Back from travel, thanks to Simona for handling things. regular fixes, seems about the right size, but spread out a bit. amdgpu has the usual range of fixes, xe has a few fixes, and nouveau has a couple of fixes, one for blackwell modifiers on 8/16 bit surfaces. Otherwise a few small fixes for mediatek, sched, imagination and pixpaper. sched: - Fix deadlock amdgpu: - Reset fixes - Misc fixes - Panel scaling fixes - HDMI fix - S0ix fixes - Hibernation fix - Secure display fix - Suspend fix - MST fix amdkfd: - Process cleanup fix xe: - Fix missing synchronization on unbind - Fix device shutdown when doing FLR - Fix user fence signaling order i915: - Avoid lock inversion when pinning to GGTT on CHV/BXT+VTD - Fix conversion between clock ticks and nanoseconds mediatek: - Disable AFBC support on Mediatek DRM driver - Add pm_runtime support for GCE power control imagination: - kconfig: Fix dependencies nouveau: - Set DMA mask earlier - Advertize correct modifiers for GB20x pixpaper: - kconfig: Fix dependencies" * tag 'drm-fixes-2025-11-08' of https://gitlab.freedesktop.org/drm/kernel: (26 commits) drm/xe: Enforce correct user fence signaling order using drm/xe: Do clean shutdown also when using flr drm/xe: Move declarations under conditional branch drm/xe/guc: Synchronize Dead CT worker with unbind drm/amd/display: Enable mst when it's detected but yet to be initialized drm/amdgpu: Fix wait after reset sequence in S3 drm/amd: Fix suspend failure with secure display TA drm/amdgpu: fix gpu page fault after hibernation on PF passthrough drm/tiny: pixpaper: add explicit dependency on MMU drm/nouveau: Advertise correct modifiers on GB20x drm: define NVIDIA DRM format modifiers for GB20x drm/nouveau: set DMA mask before creating the flush page drm/sched: Fix deadlock in drm_sched_entity_kill_jobs_cb drm/amd/display: Fix NULL deref in debugfs odm_combine_segments drm/amdkfd: Don't clear PT after process killed drm/amdgpu/smu: Handle S0ix for vangogh drm/amdgpu: Drop PMFW RLC notifier from amdgpu_device_suspend() drm/amd/display: Fix black screen with HDMI outputs drm/amd/display: Don't stretch non-native images by default in eDP drm/amd/pm: fix missing device_attr cleanup in amdgpu_pm_sysfs_init() ... |
||
|
|
9dc520632a |
Merge tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe: - Remove the sync refill API that was added in this release, in anticipation of doing it in a better way for the next release - Fix type extension for calculating size off nr_pages, like we do in other spots * tag 'io_uring-6.18-20251106' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring: fix types for region size calulation io_uring/zcrx: remove sync refill uapi |
||
|
|
faf66a7107 |
Merge tag 'drm-misc-fixes-2025-11-06' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
Short summary of fixes pull: imagination: - kconfig: Fix dependencies nouveau: - Set DMA mask earlier - Advertize correct modifiers for GB20x pixpaper: - kconfig: Fix dependencies sched: - Fix deadlock Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patch.msgid.link/20251106131244.GA155679@2a02-2454-fd5e-fd00-d540-1fd5-75b4-d5e2.dyn6.pyur.net |
||
|
|
c2c2ccfd4b |
Merge tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
|
||
|
|
b6fa6100ce |
drm/panfrost: fix UAPI kernel-doc warnings
Fix all kernel-doc warnings in include/uapi/drm/panfrost_drm.h. This mostly means modifying existing comments to conform to kernel-doc format, but there also some additions of missing kernel-doc comments and changing non-kernel-doc comments to use "/*" to begin them. Warning: panfrost_drm.h:83 struct member 'jc' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:83 struct member 'in_syncs' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:83 struct member 'in_sync_count' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:83 struct member 'out_sync' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:83 struct member 'bo_handles' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:83 struct member 'bo_handle_count' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:83 struct member 'requirements' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:83 struct member 'jm_ctx_handle' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:83 struct member 'pad' not described in 'drm_panfrost_submit' Warning: panfrost_drm.h:116 Incorrect use of kernel-doc format: * Returned offset for the BO in the GPU address space. This offset Warning: panfrost_drm.h:124 struct member 'size' not described in 'drm_panfrost_create_bo' Warning: panfrost_drm.h:124 struct member 'flags' not described in 'drm_panfrost_create_bo' Warning: panfrost_drm.h:124 struct member 'handle' not described in 'drm_panfrost_create_bo' Warning: panfrost_drm.h:124 struct member 'pad' not described in 'drm_panfrost_create_bo' Warning: panfrost_drm.h:124 struct member 'nonzero' not described in 'drm_panfrost_create_bo' Warning: panfrost_drm.h:143 struct member 'handle' not described in 'drm_panfrost_mmap_bo' Warning: panfrost_drm.h:143 struct member 'flags' not described in 'drm_panfrost_mmap_bo' Warning: panfrost_drm.h:143 struct member 'offset' not described in 'drm_panfrost_mmap_bo' Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Steven Price <steven.price@arm.com> Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com> Signed-off-by: Steven Price <steven.price@arm.com> Link: https://patch.msgid.link/20251031054152.1406764-1-rdunlap@infradead.org |
||
|
|
1cf52a0d4b |
drm: define NVIDIA DRM format modifiers for GB20x
The layout of bits within the individual tiles
(referred to as sectors in the
DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D() macro)
changed for 8 and 16-bit surfaces starting in
Blackwell 2 GPUs (With the exception of GB10).
To denote the difference, extend the sector field
in the parametric format modifier definition used
to generate modifier values for NVIDIA hardware.
Without this change, it would be impossible to
differentiate the two layouts based on modifiers,
and as a result software could attempt to share
surfaces directly between pre-GB20x and GB20x
cards, resulting in corruption when the surface
was accessed on one of the GPUs after being
populated with content by the other.
Of note: This change causes the
DRM_FORMAT_MOD_NVIDIA_BLOCK_LINEAR_2D() macro to
evaluate its "s" parameter twice, with the side
effects that entails. I surveyed all usage of the
modifier in the kernel and Mesa code, and that
does not appear to be problematic in any current
usage, but I thought it was worth calling out.
Fixes:
|
||
|
|
5624d4c378 |
Merge tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New Hotkey Support:
- input + dell-wmi-base: Electronic privacy screen on/off hotkey
support
- int3472: Fix unregister double free
- wireless-hotkey: Fix Kconfig typo"
* tag 'platform-drivers-x86-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform: x86: Kconfig: fix minor typo in help for WIRELESS_HOTKEY
platform/x86: dell-wmi-base: Handle electronic privacy screen on/off events
Input: Add keycodes for electronic privacy screen on/off hotkeys
MAINTAINERS: Update int3472 maintainers
platform/x86: int3472: Fix double free of GPIO device during unregister
|
||
|
|
3a0ff7b98a |
accel/amdxdna: Support preemption requests
The driver checks the firmware version during initialization.If preemption is supported, the driver configures preemption accordingly and handles userspace preemption requests. Otherwise, the driver returns an error for userspace preemption requests. Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20251104185340.897560-1-lizhi.hou@amd.com |
||
|
|
c3838262b8 |
virtio_net: fix alignment for virtio_net_hdr_v1_hash
Changing alignment of header would mean it's no longer safe to cast a
2 byte aligned pointer between formats. Use two 16 bit fields to make
it 2 byte aligned as previously.
This fixes the performance regression since
commit ("virtio_net: enable gso over UDP tunnel support.") as it uses
virtio_net_hdr_v1_hash_tunnel which embeds
virtio_net_hdr_v1_hash. Pktgen in guest + XDP_DROP on TAP + vhost_net
shows the TX PPS is recovered from 2.4Mpps to 4.45Mpps.
Fixes:
|
||
|
|
e568dc3e62 |
accel/amdxdna: Add IOCTL parameter for telemetry data
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters that allow collection of telemetry data. Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20251104062546.833771-3-lizhi.hou@amd.com |
||
|
|
1556c170d2 |
accel/amdxdna: Add IOCTL parameter for resource data
Extend DRM_IOCTL_AMDXDNA_GET_INFO to include additional parameters that allow collection of resource data. Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://patch.msgid.link/20251104062546.833771-2-lizhi.hou@amd.com |
||
|
|
819630bd6f |
io_uring/zcrx: remove sync refill uapi
There is a better way to handle the problem IORING_REGISTER_ZCRX_REFILL solves. The uapi can also be slightly adjusted to accommodate future extensions. Remove the feature for now, it'll be reworked for the next release. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
|
57557964b5 |
accel/ivpu: Add support for userptr buffer objects
Introduce a new ioctl `drm_ivpu_bo_create_from_userptr` that allows users to create GEM buffer objects from user pointers to memory regions. The user pointer must be page-aligned and the memory region must remain valid for the buffer object's lifetime. Userptr buffers enable direct use of mmapped files (e.g. inference weights) in NPU workloads without copying data to NPU buffer objects. This reduces memory usage and provides better flexibility for NPU applications. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com> Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Link: https://patch.msgid.link/20251029091752.203198-1-karol.wachowski@linux.intel.com |
||
|
|
18cd0a9c7a |
video: fb: Fix typo in comment in fb.h
Fix typo: "verical" -> "vertical" in macro description Signed-off-by: PIYUSH CHOUDHARY <mercmerc961@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Cc: stable@vger.kernel.org |
||
|
|
8f3eaad981 |
Input: Add keycodes for electronic privacy screen on/off hotkeys
Add keycodes for hotkeys toggling the electronic privacy screen found on some laptops on/off. There already is an API for eprivacy screens as kernel-mode-setting drm connector object properties: https://www.kernel.org/doc/html/latest/gpu/drm-kms.html#standard-connector-properties this API also supports reporting when the eprivacy screen is turned on/off by the embedded-controller (EC) in response to hotkey presses. But on some laptops (e.g. the Dell Latitude 7300) the firmware does not allow querying the presence nor the status of the eprivacy screen at boot. This makes it impossible to implement the drm connector properties API since drm objects do not allow adding new properties after creation and the presence of the eprivacy cannot be detected at boot. The first notice of the presence of an eprivacy screen on these laptops is an EC generated (WMI) event when the eprivacy screen hotkeys are pressed. In this case the new keycodes this change adds can be generated to notify userspace of the eprivacy screen on/off hotkeys being pressed, so that userspace can show the usual on-screen-display (OSD) notification for eprivacy screen on/off to the user. This is similar to how e.g. touchpad on/off keycodes are used to show the touchpad on/off OSD. Signed-off-by: Hans de Goede <hansg@kernel.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://patch.msgid.link/20251020152331.52870-2-hansg@kernel.org Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> |
||
|
|
5a5e9c0228 |
accel: Add Arm Ethos-U NPU driver
Add a driver for Arm Ethos-U65/U85 NPUs. The Ethos-U NPU has a relatively simple interface with single command stream to describe buffers, operation settings, and network operations. It supports up to 8 memory regions (though no h/w bounds on a region). The Ethos NPUs are designed to use an SRAM for scratch memory. Region 2 is reserved for SRAM (like the downstream driver stack and compiler). Userspace doesn't need access to the SRAM. The h/w has no MMU nor external IOMMU and is a DMA engine which can read and write anywhere in memory without h/w bounds checks. The user submitted command streams must be validated against the bounds of the GEM BOs. This is similar to the VC4 design which validates shaders. The job submit is based on the rocket driver for the Rockchip NPU utilizing the GPU scheduler. It is simpler as there's only 1 core rather than 3. Tested on i.MX93 platform (U65) and FVP (U85) with Mesa Teflon support. Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Tomeu Vizoso <tomeu@tomeuvizoso.net> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://patch.msgid.link/20251020-ethos-v6-2-ecebc383c4b7@kernel.org Signed-off-by: Rob Herring (Arm) <robh@kernel.org> |
||
|
|
098456f314 |
Merge tag 'drm-misc-next-2025-10-21' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19: UAPI Changes: amdxdna: - Support reading last hardware error Cross-subsystem Changes: dma-buf: - heaps: Create heap per CMA reserved location; Improve user-space documentation Core Changes: atomic: - Clean up and improve state-handling interfaces, update drivers bridge: - Improve ref counting buddy: - Optimize block management Driver Changes: amdxdna: - Fix runtime power management - Support firmware debug output ast: - Set quirks for each chip model atmel-hlcdc: - Set LCDC_ATTRE register in plane disable - Set correct values for plane scaler bochs: - Use vblank timer bridge: - synopsis: Support CEC; Init timer with correct frequency cirrus-qemu: - Use vblank timer imx: - Clean up ivu: - Update JSM API to 3.33.0 - Reset engine on more job errors - Return correct error codes for jobs komeda: - Use drm_ logging functions panel: - edp: Support AUO B116XAN02.0 panfrost: - Embed struct drm_driver in Panfrost device - Improve error handling - Clean up job handling panthor: - Support custom ASN_HASH for mt8196 renesas: - rz-du: Fix dependencies rockchip: - dsi: Add support for RK3368 - Fix LUT size for RK3386 sitronix: - Fix output position when clearing screens qaic: - Support dma-buf exports - Support new firmware's READ_DATA implementation - Replace kcalloc with memdup - Replace snprintf() with sysfs_emit() - Avoid overflows in arithmetics - Clean up - Fixes qxl: - Use vblank timer rockchip: - Clean up mode-setting code vgem: - Fix fence timer deadlock virtgpu: - Use vblank timer Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://lore.kernel.org/r/20251021111837.GA40643@linux.fritz.box |
||
|
|
6200442de0 |
Merge tag 'drm-misc-next-2025-10-02' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.19: UAPI Changes: Cross-subsystem Changes: - fbcon cleanups. - Make drivers depend on FB_TILEBLITTING instead of selecting it, and hide FB_MODE_HELPERS. Core Changes: - More preparations for rust. - Throttle dirty worker with vblank - Use drm_for_each_bridge_in_chain_scoped in drm's bridge code and assorted fixes. - Ensure drm_client_modeset tests are enabled in UML. - Rename ttm_bo_put to ttm_bo_fini, as a further step in removing the TTM bo refcount. - Add POST_LT_ADJ_REQ training sequence. - Show list of removed but still allocated bridges. - Add a simulated vblank interrupt for hardware without it, and add some helpers to use them in vkms and hypervdrm. Driver Changes: - Assorted small fixes, cleanups and updates to host1x, tegra, panthor, amdxdna, gud, vc4, ssd130x, ivpu, panfrost, panthor, sysfb, bridge/sn65dsi86, solomon, ast, tidss. - Convert drivers from using .round_rate() to .determine_rate() - Add support for KD116N3730A07/A12, chromebook mt8189, JT101TM023, LQ079L1SX01, raspberrypi 5" panels. - Improve reclocking on tegra186+ with nouveau. - Improve runtime pm in amdxdna. - Add support for HTX_PAI in imx. - Use a helper to calculate dumb buffer sizes in most drivers. Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://lore.kernel.org/r/b412fb91-8545-466a-8102-d89c0f2758a7@linux.intel.com |
||
|
|
335482a53a |
Merge tag 'drm-xe-next-2025-10-20' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
Highlights: UAPI Changes: Loosen used tracking restriction (Matthew Auld) New SR-IOV debugfs structure and debugfs updates (Michal Wajdeczko) Hide the GPU madvise flag behind a VM_BIND flag (Thomas Hellström) Always expose VRAM provisioning data on discrete GPUs (Lukasz Laguna) Cross-subsystem Changes: Allow VRAM mappings for userptr when used with SVM (Matthew Brost) Driver Changes: Allow pinning of p2p dma-buf (Thomas Hellstrom) Use per-tile debugfs where appropriate (Michal Wajdeczko) Add documentation for Execution Queues (Niranjana Vishwanathapura) PF improvements (Michal Wajdeczko) VF migration recovery redesign work (Matthew Brost) User / Kernel VRAM partitioning (Piotr Piórkowski) Update Tile-based messages (Michal Wajdeczko) Allow configfs to disable specific GT types (Matt Roper) VF provisioning improvements (Michal Wajdeczko) Initial Xe3P support (Various people) Signed-off-by: Dave Airlie <airlied@redhat.com> From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com> Link: https://lore.kernel.org/r/aPXzbOb7eGbkgMrr@fedora |
||
|
|
ce831bffce |
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
The madvise implementation currently resets the SVM madvise if the underlying CPU map is unmapped. This is in an attempt to mimic the CPU madvise behaviour. However, it's not clear that this is a desired behaviour since if the end app user relies on it for malloc()ed objects or stack objects, it may not work as intended. Instead of having the autoreset functionality being a direct application-facing implicit UAPI, make the UMD explicitly choose this behaviour if it wants to expose it by introducing DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET, and add a semantics description. v2: - Kerneldoc fixes. Fix a commit log message. Fixes: |
||
|
|
02e5f74ef0 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Fix the handling of ZCR_EL2 in NV VMs
- Pick the correct translation regime when doing a PTW on the back of
a SEA
- Prevent userspace from injecting an event into a vcpu that isn't
initialised yet
- Move timer save/restore to the sysreg handling code, fixing EL2
timer access in the process
- Add FGT-based trapping of MDSCR_EL1 to reduce the overhead of debug
- Fix trapping configuration when the host isn't GICv3
- Improve the detection of HCR_EL2.E2H being RES1
- Drop a spurious 'break' statement in the S1 PTW
- Don't try to access SPE when owned by EL3
Documentation updates:
- Document the failure modes of event injection
- Document that a GICv3 guest can be created on a GICv5 host with
FEAT_GCIE_LEGACY
Selftest improvements:
- Add a selftest for the effective value of HCR_EL2.AMO
- Address build warning in the timer selftest when building with
clang
- Teach irqfd selftests about non-x86 architectures
- Add missing sysregs to the set_id_regs selftest
- Fix vcpu allocation in the vgic_lpi_stress selftest
- Correctly enable interrupts in the vgic_lpi_stress selftest
x86:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test
for the bug fixed by commit
|
||
|
|
4361f5aa8b |
Merge tag 'kvm-x86-fixes-6.18-rc2' of https://github.com/kvm-x86/linux into HEAD
KVM x86 fixes for 6.18:
- Expand the KVM_PRE_FAULT_MEMORY selftest to add a regression test for the
bug fixed by commit
|
||
|
|
59a2d3f38a |
drm/xe/uapi: Hide the madvise autoreset behind a VM_BIND flag
The madvise implementation currently resets the SVM madvise if the
underlying CPU map is unmapped. This is in an attempt to mimic the
CPU madvise behaviour. However, it's not clear that this is a desired
behaviour since if the end app user relies on it for malloc()ed
objects or stack objects, it may not work as intended.
Instead of having the autoreset functionality being a direct
application-facing implicit UAPI, make the UMD explicitly choose
this behaviour if it wants to expose it by introducing
DRM_XE_VM_BIND_FLAG_MADVISE_AUTORESET, and add a semantics
description.
v2:
- Kerneldoc fixes. Fix a commit log message.
Fixes:
|
||
|
|
b291e4f1a4 |
accel/amdxdna: Support getting last hardware error
Add new parameter DRM_AMDXDNA_HW_LAST_ASYNC_ERR to get array IOCTL. When hardware reports an error, the driver save the error information and timestamp. This new get array parameter retrieves the last error. Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org> Signed-off-by: Lizhi Hou <lizhi.hou@amd.com> Link: https://lore.kernel.org/r/20251014234119.628453-1-lizhi.hou@amd.com |
||
|
|
409b949909 |
drm/xe/uapi: Add documentation for DRM_XE_GEM_CREATE_FLAG_SCANOUT
Add documentation for drm_xe_gem_create structure flag DRM_XE_GEM_CREATE_FLAG_SCANOUT. Signed-off-by: Sanjay Yadav <sanjay.kumar.yadav@intel.com> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Signed-off-by: Matthew Auld <matthew.auld@intel.com> Link: https://lore.kernel.org/r/20251014142823.3701228-2-sanjay.kumar.yadav@intel.com |
||
|
|
ef38b4eab1 |
drm/amdgpu: drop unused structures in amdgpu_drm.h
These were never used and are duplicated with the
interface that is used. Maybe leftovers from a previous
revision of the patch that added them.
Fixes:
|
||
|
|
9b966ae422 |
Merge drm/drm-next into drm-misc-next
Updating drm-misc-next to the state of v6.18-rc1. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> |
||
|
|
fbde105f13 |
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov:
- Finish constification of 1st parameter of bpf_d_path() (Rong Tao)
- Harden userspace-supplied xdp_desc validation (Alexander Lobakin)
- Fix metadata_dst leak in __bpf_redirect_neigh_v{4,6}() (Daniel
Borkmann)
- Fix undefined behavior in {get,put}_unaligned_be32() (Eric Biggers)
- Use correct context to unpin bpf hash map with special types (KaFai
Wan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Add test for unpinning htab with internal timer struct
bpf: Avoid RCU context warning when unpinning htab with internal structs
xsk: Harden userspace-supplied xdp_desc validation
bpf: Fix metadata_dst leak __bpf_redirect_neigh_v{4,6}
libbpf: Fix undefined behavior in {get,put}_unaligned_be32()
bpf: Finish constification of 1st parameter of bpf_d_path()
|
||
|
|
fe2bf6234e |
KVM: guest_memfd: Add INIT_SHARED flag, reject user page faults if not set
Add a guest_memfd flag to allow userspace to state that the underlying
memory should be configured to be initialized as shared, and reject user
page faults if the guest_memfd instance's memory isn't shared. Because
KVM doesn't yet support in-place private<=>shared conversions, all
guest_memfd memory effectively follows the initial state.
Alternatively, KVM could deduce the initial state based on MMAP, which for
all intents and purposes is what KVM currently does. However, implicitly
deriving the default state based on MMAP will result in a messy ABI when
support for in-place conversions is added.
For x86 CoCo VMs, which don't yet support MMAP, memory is currently private
by default (otherwise the memory would be unusable). If MMAP implies
memory is shared by default, then the default state for CoCo VMs will vary
based on MMAP, and from userspace's perspective, will change when in-place
conversion support is added. I.e. to maintain guest<=>host ABI, userspace
would need to immediately convert all memory from shared=>private, which
is both ugly and inefficient. The inefficiency could be avoided by adding
a flag to state that memory is _private_ by default, irrespective of MMAP,
but that would lead to an equally messy and hard to document ABI.
Bite the bullet and immediately add a flag to control the default state so
that the effective behavior is explicit and straightforward.
Fixes:
|
||
|
|
d2042d8f96 |
KVM: Rework KVM_CAP_GUEST_MEMFD_MMAP into KVM_CAP_GUEST_MEMFD_FLAGS
Rework the not-yet-released KVM_CAP_GUEST_MEMFD_MMAP into a more generic KVM_CAP_GUEST_MEMFD_FLAGS capability so that adding new flags doesn't require a new capability, and so that developers aren't tempted to bundle multiple flags into a single capability. Note, kvm_vm_ioctl_check_extension_generic() can only return a 32-bit value, but that limitation can be easily circumvented by adding e.g. KVM_CAP_GUEST_MEMFD_FLAGS2 in the unlikely event guest_memfd supports more than 32 flags. Reviewed-by: Ackerley Tng <ackerleytng@google.com> Tested-by: Ackerley Tng <ackerleytng@google.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20251003232606.4070510-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> |
||
|
|
284fc30e66 |
Merge tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel
Pull more drm fixes from Dave Airlie:
"Just the follow up fixes for rc1 from the next branch, amdgpu and xe
mostly with a single v3d fix in there.
amdgpu:
- DC DCE6 fixes
- GPU reset fixes
- Secure diplay messaging cleanup
- MES fix
- GPUVM locking fixes
- PMFW messaging cleanup
- PCI US/DS switch handling fix
- VCN queue reset fix
- DC FPU handling fix
- DCN 3.5 fix
- DC mirroring fix
amdkfd:
- Fix kfd process ref leak
- mmap write lock handling fix
- Fix comments in IOCTL
xe:
- Fix build with clang 16
- Fix handling of invalid configfs syntax usage and spell out the
expected syntax in the documentation
- Do not try late bind firmware when running as VF since it shouldn't
handle firmware loading
- Fix idle assertion for local BOs
- Fix uninitialized variable for late binding
- Do not require perfmon_capable to expose free memory at page
granularity. Handle it like other drm drivers do
- Fix lock handling on suspend error path
- Fix I2C controller resume after S3
v3d:
- fix fence locking"
* tag 'drm-next-2025-10-11-1' of https://gitlab.freedesktop.org/drm/kernel: (34 commits)
drm/amd/display: Incorrect Mirror Cositing
drm/amd/display: Enable Dynamic DTBCLK Switch
drm/amdgpu: Report individual reset error
drm/amdgpu: partially revert "revert to old status lock handling v3"
drm/amd/display: Fix unsafe uses of kernel mode FPU
drm/amd/pm: Disable VCN queue reset on SMU v13.0.6 due to regression
drm/amdgpu: Fix general protection fault in amdgpu_vm_bo_reset_state_machine
drm/amdgpu: Check swus/ds for switch state save
drm/amdkfd: Fix two comments in kfd_ioctl.h
drm/amd/pm: Avoid interface mismatch messaging
drm/amdgpu: Merge amdgpu_vm_set_pasid into amdgpu_vm_init
drm/amd/amdgpu: Fix the mes version that support inv_tlbs
drm/amd: Check whether secure display TA loaded successfully
drm/amdkfd: Fix mmap write lock not release
drm/amdkfd: Fix kfd process ref leaking when userptr unmapping
drm/amdgpu: Fix for GPU reset being blocked by KIQ I/O.
drm/amd/display: Disable scaling on DCE6 for now
drm/amd/display: Properly disable scaling on DCE6
drm/amd/display: Properly clear SCL_*_FILTER_CONTROL on DCE6
drm/amd/display: Add missing DCE6 SCL_HORZ_FILTER_INIT* SRIs
...
|
||
|
|
eba41c0173 |
Merge tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull io_uring fixes from Jens Axboe: - Fixup indentation in the UAPI header - Two fixes for zcrx. One fixes receiving too much in some cases, and the other deals with not correctly incrementing the source in the fallback copy loop - Fix for a race in the IORING_OP_WAITID command, where there was a small window where the request would be left on the wait_queue_head list even though it was being canceled/completed - Update liburing git URL in the kernel tree * tag 'io_uring-6.18-20251009' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: io_uring/zcrx: increment fallback loop src offset io_uring/zcrx: fix overshooting recv limit io_uring: use tab indentation for IORING_SEND_VECTORIZED comment io_uring/waitid: always prune wait queue entry in io_waitid_wait() io_uring: update liburing git URL |
||
|
|
1f086d2508 |
drm/amdkfd: Fix two comments in kfd_ioctl.h
Queue read and write pointers are "to KFD", not "from KFD". Suggested-by: Robert Liu <robert.liu@amd.com> Signed-off-by: Felix Kuehling <felix.kuehling@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Robert Liu <robert.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> |
||
|
|
beb97995b9 |
io_uring: use tab indentation for IORING_SEND_VECTORIZED comment
Be consistent with tab style of "liburing/src/include/liburing/io_uring.h". Signed-off-by: Haiyue Wang <haiyuewa@163.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> |
||
|
|
2f2c725493 |
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
|
6093a688a0 |
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
||
|
|
54ba6d9b13 |
Merge tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
|
||
|
|
908057d185 |
Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Drivers: - Add ciphertext hiding support to ccp - Add hashjoin, gather and UDMA data move features to hisilicon - Add lz4 and lz77_only to hisilicon - Add xilinx hwrng driver - Add ti driver with ecb/cbc aes support - Add ring buffer idle and command queue telemetry for GEN6 in qat Others: - Use rcu_dereference_all to stop false alarms in rhashtable - Fix CPU number wraparound in padata" * tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits) dt-bindings: rng: hisi-rng: convert to DT schema crypto: doc - Add explicit title heading to API docs hwrng: ks-sa - fix division by zero in ks_sa_rng_init KEYS: X.509: Fix Basic Constraints CA flag parsing crypto: anubis - simplify return statement in anubis_mod_init crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs crypto: hisilicon/qm - clear all VF configurations in the hardware crypto: hisilicon - enable error reporting again crypto: hisilicon/qm - mask axi error before memory init crypto: hisilicon/qm - invalidate queues in use crypto: qat - Return pointer directly in adf_ctl_alloc_resources crypto: aspeed - Fix dma_unmap_sg() direction rhashtable: Use rcu_dereference_all and rcu_dereference_all_check crypto: comp - Use same definition of context alloc and free ops crypto: omap - convert from tasklet to BH workqueue crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user() crypto: caam - double the entropy delay interval for retry padata: WQ_PERCPU added to alloc_workqueue users padata: replace use of system_unbound_wq with system_dfl_wq crypto: cryptd - WQ_PERCPU added to alloc_workqueue users ... |
||
|
|
de7342228b |
bpf: Finish constification of 1st parameter of bpf_d_path()
The commit |
||
|
|
f3826aa996 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit
|
||
|
|
674b0ddb75 |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus assorted cleanups and fixes. The only core update is to sd.c and is mostly cosmetic" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits) scsi: MAINTAINERS: Update FC element owners scsi: mpt3sas: Update driver version to 54.100.00.00 scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate scsi: ufs: dt-bindings: Document gear and rate limit properties scsi: ufs: core: Fix data race in CPU latency PM QoS request handling scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill() scsi: storvsc: Remove redundant ternary operators scsi: ufs: core: Change MCQ interrupt enable flow scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl() scsi: lpfc: Copyright updates for 14.4.0.11 patches scsi: lpfc: Update lpfc version to 14.4.0.11 scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int scsi: lpfc: Clean up extraneous phba dentries ... |
||
|
|
2ccb4d203f |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A new Pensando ionic driver, a new Gen 3 HW support for Intel irdma,
and lots of small bnxt_re improvements.
- Small bug fixes and improves to hfi1, efa, mlx5, erdma, rdmarvt,
siw
- Allow userspace access to IB service records through the rdmacm
- Optimize dma mapping for erdma
- Fix shutdown of the GSI QP in mana
- Support relaxed ordering MR and fix a corruption bug with mlx5 DMA
Data Direct
- Many improvement to bnxt_re:
- Debugging features and counters
- Improve performance of some commands
- Change flow_label reporting in completions
- Mirror vnic
- RDMA flow support
- New RDMA driver for Pensando Ethernet devices: ionic
- Gen 3 hardware support for the Intel irdma driver
- Fix rdma routing resolution with VRFs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (85 commits)
RDMA/ionic: Fix memory leak of admin q_wr
RDMA/siw: Always report immediate post SQ errors
RDMA/bnxt_re: improve clarity in ALLOC_PAGE handler
RDMA/irdma: Remove unused struct irdma_cq fields
RDMA/irdma: Fix positive vs negative error codes in irdma_post_send()
RDMA/bnxt_re: Remove non-statistics counters from hw_counters
RDMA/bnxt_re: Add debugfs info entry for device and resource information
RDMA/bnxt_re: Fix incorrect errno used in function comments
RDMA: Use %pe format specifier for error pointers
RDMA/ionic: Use ether_addr_copy instead of memcpy
RDMA/ionic: Fix build failure on SPARC due to xchg() operand size
RDMA/rxe: Fix race in do_task() when draining
IB/sa: Fix sa_local_svc_timeout_ms read race
IB/ipoib: Ignore L3 master device
RDMA/core: Use route entry flag to decide on loopback traffic
RDMA/core: Resolve MAC of next-hop device without ARP support
RDMA/core: Squash a single user static function
RDMA/irdma: Update Kconfig
RDMA/irdma: Extend CQE Error and Flush Handling for GEN3 Devices
RDMA/irdma: Add Atomic Operations support
...
|
||
|
|
65989db7f8 |
Merge tag 'ext4_for_linus-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"New ext4 features:
- Add support so tune2fs can modify/update the superblock using an
ioctl, without needing write access to the block device
- Add support for 32-bit reserved uid's and gid's
Bug fixes:
- Fix potential warnings and other failures caused by corrupted /
fuzzed file systems
- Fail unaligned direct I/O write with EINVAL instead of silently
falling back to buffered I/O
- Correectly handle fsmap queries for metadata mappings
- Avoid journal stalls caused by writeback throttling
- Add some missing GFP_NOFAIL flags to avoid potential deadlocks
under extremem memory pressure
Cleanups:
- Remove obsolete EXT3 Kconfigs"
* tag 'ext4_for_linus-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix checks for orphan inodes
ext4: validate ea_ino and size in check_xattrs
ext4: guard against EA inode refcount underflow in xattr update
ext4: implemet new ioctls to set and get superblock parameters
ext4: add support for 32-bit default reserved uid and gid values
ext4: avoid potential buffer over-read in parse_apply_sb_mount_options()
ext4: fix an off-by-one issue during moving extents
ext4: increase i_disksize to offset + len in ext4_update_disksize_before_punch()
ext4: verify orphan file size is not too big
ext4: fail unaligned direct IO write with EINVAL
ext4: correctly handle queries for metadata mappings
ext4: increase IO priority of fastcommit
ext4: remove obsolete EXT3 config options
jbd2: increase IO priority of checkpoint
ext4: fix potential null deref in ext4_mb_init()
ext4: add ext4_sb_bread_nofail() helper function for ext4_free_branches()
ext4: replace min/max nesting with clamp()
fs: ext4: change GFP_KERNEL to GFP_NOFS to avoid deadlock
|
||
|
|
6238729bfc |
Merge tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
Pull fuse updates from Miklos Szeredi: - Extend copy_file_range interface to be fully 64bit capable (Miklos) - Add selftest for fusectl (Chen Linxuan) - Move fuse docs into a separate directory (Bagas Sanjaya) - Allow fuse to enter freezable state in some cases (Sergey Senozhatsky) - Clean up writeback accounting after removing tmp page copies (Joanne) - Optimize virtiofs request handling (Li RongQing) - Add synchronous FUSE_INIT support (Miklos) - Allow server to request prune of unused inodes (Miklos) - Fix deadlock with AIO/sync release (Darrick) - Add some prep patches for block/iomap support (Darrick) - Misc fixes and cleanups * tag 'fuse-update-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: (26 commits) fuse: move CREATE_TRACE_POINTS to a separate file fuse: move the backing file idr and code into a new source file fuse: enable FUSE_SYNCFS for all fuseblk servers fuse: capture the unique id of fuse commands being sent fuse: fix livelock in synchronous file put from fuseblk workers mm: fix lockdep issues in writeback handling fuse: add prune notification fuse: remove redundant calls to fuse_copy_finish() in fuse_notify() fuse: fix possibly missing fuse_copy_finish() call in fuse_notify() fuse: remove FUSE_NOTIFY_CODE_MAX from <uapi/linux/fuse.h> fuse: remove fuse_readpages_end() null mapping check fuse: fix references to fuse.rst -> fuse/fuse.rst fuse: allow synchronous FUSE_INIT fuse: zero initialize inode private data fuse: remove unused 'inode' parameter in fuse_passthrough_open virtio_fs: fix the hash table using in virtio_fs_enqueue_req() mm: remove BDI_CAP_WRITEBACK_ACCT fuse: use default writeback accounting virtio_fs: Remove redundant spinlock in virtio_fs_request_complete() fuse: remove unneeded offset assignment when filling write pages ... |
||
|
|
fef3530379 |
Merge branch 'pci/capability-search'
- Simplify __pci_find_next_cap_ttl() by replacing magic numbers with #defines, extracting fields with FIELD_GET(), etc (Hans Zhang) - Convert __pci_find_next_cap_ttl() to a PCI_FIND_NEXT_CAP() macro that takes a config space accessor function so we can also use it in cases where the usual config accessors aren't available (Hans Zhang) - Similarly convert pci_find_next_ext_capability() to a PCI_FIND_NEXT_EXT_CAP() macro (Hans Zhang) - Implement dwc, dwc endpoint, and cadence capability search interfaces on top of PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP(), replacing the previous duplicated code (Hans Zhang) - Search for capabilities in the cadence core instead of hard-coding their offsets, which are subject to change (Hans Zhang) * pci/capability-search: PCI: cadence: Use cdns_pcie_find_*capability() to avoid hardcoding offsets PCI: cadence: Implement capability search using PCI core APIs PCI: dwc: ep: Implement capability search using PCI core APIs PCI: dwc: Implement capability search using PCI core APIs PCI: Refactor extended capability search into PCI_FIND_NEXT_EXT_CAP() PCI: Refactor capability search into PCI_FIND_NEXT_CAP() PCI: Clean up __pci_find_next_cap_ttl() readability |
||
|
|
e406d57be7 |
Merge tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton: - "ida: Remove the ida_simple_xxx() API" from Christophe Jaillet completes the removal of this legacy IDR API - "panic: introduce panic status function family" from Jinchao Wang provides a number of cleanups to the panic code and its various helpers, which were rather ad-hoc and scattered all over the place - "tools/delaytop: implement real-time keyboard interaction support" from Fan Yu adds a few nice user-facing usability changes to the delaytop monitoring tool - "efi: Fix EFI boot with kexec handover (KHO)" from Evangelos Petrongonas fixes a panic which was happening with the combination of EFI and KHO - "Squashfs: performance improvement and a sanity check" from Phillip Lougher teaches squashfs's lseek() about SEEK_DATA/SEEK_HOLE. A mere 150x speedup was measured for a well-chosen microbenchmark - plus another 50-odd singleton patches all over the place * tag 'mm-nonmm-stable-2025-10-02-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (75 commits) Squashfs: reject negative file sizes in squashfs_read_inode() kallsyms: use kmalloc_array() instead of kmalloc() MAINTAINERS: update Sibi Sankar's email address Squashfs: add SEEK_DATA/SEEK_HOLE support Squashfs: add additional inode sanity checking lib/genalloc: fix device leak in of_gen_pool_get() panic: remove CONFIG_PANIC_ON_OOPS_VALUE ocfs2: fix double free in user_cluster_connect() checkpatch: suppress strscpy warnings for userspace tools cramfs: fix incorrect physical page address calculation kernel: prevent prctl(PR_SET_PDEATHSIG) from racing with parent process exit Squashfs: fix uninit-value in squashfs_get_parent kho: only fill kimage if KHO is finalized ocfs2: avoid extra calls to strlen() after ocfs2_sprintf_system_inode_name() kernel/sys.c: fix the racy usage of task_lock(tsk->group_leader) in sys_prlimit64() paths sched/task.h: fix the wrong comment on task_lock() nesting with tasklist_lock coccinelle: platform_no_drv_owner: handle also built-in drivers coccinelle: of_table: handle SPI device ID tables lib/decompress: use designated initializers for struct compress_format efi: support booting with kexec handover (KHO) ... |
||
|
|
8804d970fa |
Merge tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "mm, swap: improve cluster scan strategy" from Kairui Song improves
performance and reduces the failure rate of swap cluster allocation
- "support large align and nid in Rust allocators" from Vitaly Wool
permits Rust allocators to set NUMA node and large alignment when
perforning slub and vmalloc reallocs
- "mm/damon/vaddr: support stat-purpose DAMOS" from Yueyang Pan extend
DAMOS_STAT's handling of the DAMON operations sets for virtual
address spaces for ops-level DAMOS filters
- "execute PROCMAP_QUERY ioctl under per-vma lock" from Suren
Baghdasaryan reduces mmap_lock contention during reads of
/proc/pid/maps
- "mm/mincore: minor clean up for swap cache checking" from Kairui Song
performs some cleanup in the swap code
- "mm: vm_normal_page*() improvements" from David Hildenbrand provides
code cleanup in the pagemap code
- "add persistent huge zero folio support" from Pankaj Raghav provides
a block layer speedup by optionalls making the
huge_zero_pagepersistent, instead of releasing it when its refcount
falls to zero
- "kho: fixes and cleanups" from Mike Rapoport adds a few touchups to
the recently added Kexec Handover feature
- "mm: make mm->flags a bitmap and 64-bit on all arches" from Lorenzo
Stoakes turns mm_struct.flags into a bitmap. To end the constant
struggle with space shortage on 32-bit conflicting with 64-bit's
needs
- "mm/swapfile.c and swap.h cleanup" from Chris Li cleans up some swap
code
- "selftests/mm: Fix false positives and skip unsupported tests" from
Donet Tom fixes a few things in our selftests code
- "prctl: extend PR_SET_THP_DISABLE to only provide THPs when advised"
from David Hildenbrand "allows individual processes to opt-out of
THP=always into THP=madvise, without affecting other workloads on the
system".
It's a long story - the [1/N] changelog spells out the considerations
- "Add and use memdesc_flags_t" from Matthew Wilcox gets us started on
the memdesc project. Please see
https://kernelnewbies.org/MatthewWilcox/Memdescs and
https://blogs.oracle.com/linux/post/introducing-memdesc
- "Tiny optimization for large read operations" from Chi Zhiling
improves the efficiency of the pagecache read path
- "Better split_huge_page_test result check" from Zi Yan improves our
folio splitting selftest code
- "test that rmap behaves as expected" from Wei Yang adds some rmap
selftests
- "remove write_cache_pages()" from Christoph Hellwig removes that
function and converts its two remaining callers
- "selftests/mm: uffd-stress fixes" from Dev Jain fixes some UFFD
selftests issues
- "introduce kernel file mapped folios" from Boris Burkov introduces
the concept of "kernel file pages". Using these permits btrfs to
account its metadata pages to the root cgroup, rather than to the
cgroups of random inappropriate tasks
- "mm/pageblock: improve readability of some pageblock handling" from
Wei Yang provides some readability improvements to the page allocator
code
- "mm/damon: support ARM32 with LPAE" from SeongJae Park teaches DAMON
to understand arm32 highmem
- "tools: testing: Use existing atomic.h for vma/maple tests" from
Brendan Jackman performs some code cleanups and deduplication under
tools/testing/
- "maple_tree: Fix testing for 32bit compiles" from Liam Howlett fixes
a couple of 32-bit issues in tools/testing/radix-tree.c
- "kasan: unify kasan_enabled() and remove arch-specific
implementations" from Sabyrzhan Tasbolatov moves KASAN arch-specific
initialization code into a common arch-neutral implementation
- "mm: remove zpool" from Johannes Weiner removes zspool - an
indirection layer which now only redirects to a single thing
(zsmalloc)
- "mm: task_stack: Stack handling cleanups" from Pasha Tatashin makes a
couple of cleanups in the fork code
- "mm: remove nth_page()" from David Hildenbrand makes rather a lot of
adjustments at various nth_page() callsites, eventually permitting
the removal of that undesirable helper function
- "introduce kasan.write_only option in hw-tags" from Yeoreum Yun
creates a KASAN read-only mode for ARM, using that architecture's
memory tagging feature. It is felt that a read-only mode KASAN is
suitable for use in production systems rather than debug-only
- "mm: hugetlb: cleanup hugetlb folio allocation" from Kefeng Wang does
some tidying in the hugetlb folio allocation code
- "mm: establish const-correctness for pointer parameters" from Max
Kellermann makes quite a number of the MM API functions more accurate
about the constness of their arguments. This was getting in the way
of subsystems (in this case CEPH) when they attempt to improving
their own const/non-const accuracy
- "Cleanup free_pages() misuse" from Vishal Moola fixes a number of
code sites which were confused over when to use free_pages() vs
__free_pages()
- "Add Rust abstraction for Maple Trees" from Alice Ryhl makes the
mapletree code accessible to Rust. Required by nouveau and by its
forthcoming successor: the new Rust Nova driver
- "selftests/mm: split_huge_page_test: split_pte_mapped_thp
improvements" from David Hildenbrand adds a fix and some cleanups to
the thp selftesting code
- "mm, swap: introduce swap table as swap cache (phase I)" from Chris
Li and Kairui Song is the first step along the path to implementing
"swap tables" - a new approach to swap allocation and state tracking
which is expected to yield speed and space improvements. This
patchset itself yields a 5-20% performance benefit in some situations
- "Some ptdesc cleanups" from Matthew Wilcox utilizes the new memdesc
layer to clean up the ptdesc code a little
- "Fix va_high_addr_switch.sh test failure" from Chunyu Hu fixes some
issues in our 5-level pagetable selftesting code
- "Minor fixes for memory allocation profiling" from Suren Baghdasaryan
addresses a couple of minor issues in relatively new memory
allocation profiling feature
- "Small cleanups" from Matthew Wilcox has a few cleanups in
preparation for more memdesc work
- "mm/damon: add addr_unit for DAMON_LRU_SORT and DAMON_RECLAIM" from
Quanmin Yan makes some changes to DAMON in furtherance of supporting
arm highmem
- "selftests/mm: Add -Wunreachable-code and fix warnings" from Muhammad
Anjum adds that compiler check to selftests code and fixes the
fallout, by removing dead code
- "Improvements to Victim Process Thawing and OOM Reaper Traversal
Order" from zhongjinji makes a number of improvements in the OOM
killer: mainly thawing a more appropriate group of victim threads so
they can release resources
- "mm/damon: misc fixups and improvements for 6.18" from SeongJae Park
is a bunch of small and unrelated fixups for DAMON
- "mm/damon: define and use DAMON initialization check function" from
SeongJae Park implement reliability and maintainability improvements
to a recently-added bug fix
- "mm/damon/stat: expose auto-tuned intervals and non-idle ages" from
SeongJae Park provides additional transparency to userspace clients
of the DAMON_STAT information
- "Expand scope of khugepaged anonymous collapse" from Dev Jain removes
some constraints on khubepaged's collapsing of anon VMAs. It also
increases the success rate of MADV_COLLAPSE against an anon vma
- "mm: do not assume file == vma->vm_file in compat_vma_mmap_prepare()"
from Lorenzo Stoakes moves us further towards removal of
file_operations.mmap(). This patchset concentrates upon clearing up
the treatment of stacked filesystems
- "mm: Improve mlock tracking for large folios" from Kiryl Shutsemau
provides some fixes and improvements to mlock's tracking of large
folios. /proc/meminfo's "Mlocked" field became more accurate
- "mm/ksm: Fix incorrect accounting of KSM counters during fork" from
Donet Tom fixes several user-visible KSM stats inaccuracies across
forks and adds selftest code to verify these counters
- "mm_slot: fix the usage of mm_slot_entry" from Wei Yang addresses
some potential but presently benign issues in KSM's mm_slot handling
* tag 'mm-stable-2025-10-01-19-00' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (372 commits)
mm: swap: check for stable address space before operating on the VMA
mm: convert folio_page() back to a macro
mm/khugepaged: use start_addr/addr for improved readability
hugetlbfs: skip VMAs without shareable locks in hugetlb_vmdelete_list
alloc_tag: fix boot failure due to NULL pointer dereference
mm: silence data-race in update_hiwater_rss
mm/memory-failure: don't select MEMORY_ISOLATION
mm/khugepaged: remove definition of struct khugepaged_mm_slot
mm/ksm: get mm_slot by mm_slot_entry() when slot is !NULL
hugetlb: increase number of reserving hugepages via cmdline
selftests/mm: add fork inheritance test for ksm_merging_pages counter
mm/ksm: fix incorrect KSM counter handling in mm_struct during fork
drivers/base/node: fix double free in register_one_node()
mm: remove PMD alignment constraint in execmem_vmalloc()
mm/memory_hotplug: fix typo 'esecially' -> 'especially'
mm/rmap: improve mlock tracking for large folios
mm/filemap: map entire large folio faultaround
mm/fault: try to map the entire file folio in finish_fault()
mm/rmap: mlock large folios in try_to_unmap_one()
mm/rmap: fix a mlock race condition in folio_referenced_one()
...
|