- Fix memory leak in pci_iov_add_virtfn() (Navid Emamdoost)
- Extend pci_add_dma_alias() so it can add a range of aliases (James
Sewart)
- Add DMA aliases for PLX PEX NTB (James Sewart)
* pci/virtualization:
PCI: Add DMA alias quirk for PLX PEX NTB
PCI: Add nr_devfns parameter to pci_add_dma_alias()
PCI: Fix pci_add_dma_alias() bitmask size
PCI/IOV: Fix memory leak in pci_iov_add_virtfn()
- Support 64-bit addressing for both streaming and coherent DMA (Wesley
Sheng)
- Read vep_vector_number with 16-bit, not 32-bit read (Logan Gunthorpe)
- Add Intercomm Notify and Upstream Error Containment support (Logan
Gunthorpe)
- Remove redundant valid PFF number count (Wesley Sheng)
- Avoid unnecessary CSR read in ISR (Wesley Sheng)
- Rename Gen3-specific constants (Logan Gunthorpe)
- Rework infrastructure to support Gen3- and Gen4-specific code (Logan
Gunthorpe)
- Add Gen4 system info register support (Logan Gunthorpe)
- Add Gen4 flash information interface support (Kelvin Cao)
- Add Gen4 MRPC GAS access permission check (Kelvin Cao)
* pci/switchtec:
PCI/switchtec: Add Gen4 device IDs
PCI/switchtec: Add Gen4 MRPC GAS access permission check
PCI/switchtec: Add Gen4 flash information interface support
PCI/switchtec: Add Gen4 system info register support
PCI/switchtec: Separate Gen3 register structures into unions
PCI/switchtec: Factor out Gen3 ioctl_flash_part_info()
PCI/switchtec: Add 'generation' variable
PCI/switchtec: Rename generation-specific constants
PCI/switchtec: Move check event ID from mask_event() to switchtec_event_isr()
PCI/switchtec: Remove redundant valid PFF number count
PCI/switchtec: Add support for Intercomm Notify and Upstream Error Containment
PCI/switchtec: Fix vep_vector_number ioread width
PCI/switchtec: Use dma_set_mask_and_coherent()
- Clear only bridge windows (not BARs) while assigning bus resources
(Logan Gunthorpe)
- Improve resource assignment for deep hotplug hierarchies, e.g.,
Thunderbolt (Nicholas Johnson)
* pci/resource:
PCI: Allow adjust_bridge_window() to shrink resource if necessary
PCI: Set resource size directly in adjust_bridge_window()
PCI: Rename extend_bridge_window() to adjust_bridge_window()
PCI: Rename extend_bridge_window() parameter
PCI: Consider alignment of hot-added bridges when assigning resources
PCI: Remove local variable usage in pci_bus_distribute_available_resources()
PCI: Pass size + alignment to pci_bus_distribute_available_resources()
PCI: Rename variables
PCI: Remove unnecessary braces
PCI: Don't disable bridge BARs when assigning bus resources
- Add Intel SkyLake-E to the whitelist of host bridges that support
peer-to-peer DMA (Armen Baloyan)
* pci/p2pdma:
PCI/P2PDMA: Add Intel SkyLake-E to the whitelist
- Fix Broadcom iProc quirk so it's applied regardless of whether the
iproc driver is built-in or a module (Wei Liu)
- Add extra delay when resuming AMD Ryzen5/7 XHCI controllers from D3hot
so they work after resume from runtime suspend or suspend-to-idle
(Daniel Drake)
- Fix pci_alloc_irq_vectors() function name typo in docs (Zenghui Yu)
* pci/misc:
Documentation: PCI: Fix pci_alloc_irq_vectors() function name typo
PCI: Increase D3 delay for AMD Ryzen5/7 XHCI controllers
PCI: Add generic quirk for increasing D3hot delay
PCI: iproc: Apply quirk_paxc_bridge() for module as well as built-in
- Log a message to identify the device that caused AER/DPC recovery to
fail (Yicong Yang)
- Initialize aer_fifo before use (Dongdong Liu)
* pci/aer:
PCI/AER: Initialize aer_fifo
PCI/AER: Factor message prefixes with dev_fmt()
PCI/AER: Log which device prevents error recovery
Remove checks for resource size in adjust_bridge_window(). This is
necessary to allow pci_bus_distribute_available_resources() to function
when the kernel parameter "pci=hpmemsize=nn[KMG]" is used to allocate
resources. Because the kernel parameter sets the size of all hotplug
bridges to be the same, there are problems when nested hotplug bridges are
encountered. Fitting a downstream hotplug bridge with size X and normal
bridges with non-zero size Y into parent hotplug bridge with size X is
impossible, and hence the downstream hotplug bridge needs to shrink to fit
into its parent.
Add check for if bridge is extended or shrunken and reflect that in the
call to pci_dbg().
Reset the resource if its new size is zero (if we have run out of a bridge
window resource) to prevent the PCI resource assignment code from
attempting to assign a zero-sized resource.
Link: https://lore.kernel.org/r/PSXP216MB0438D3E2CFE64EBAA32AF691803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Change pci_bus_distribute_available_resources() to better handle bridges
with different resource alignment requirements.
The arguments io, mmio and mmio_pref represent the start and end
addresses of resource, into which we must fit the current bridge window.
The steps taken by pci_bus_distribute_available_resources():
- For io, mmio and mmio_pref, increase .start to align with the alignment
of the current bridge window (otherwise the current bridge window may
not fit within the available range).
- For io, mmio and mmio_pref, adjust the current bridge window to the
size after the above.
- Count the number of hotplug bridges and normal bridges on this bus.
- If the total number of bridges is one, give that bridge all of the
resources and return.
- If there are no hotplug bridges, return.
- For io, mmio and mmio_pref, increase .start by the amount required for
each bridge resource on the bus for non hotplug bridges, giving extra
room to make up for alignment of those resources.
- For io, mmio and mmio_pref, calculate the resource size per hotplug
bridge which is available after the previous steps.
- For io, mmio and mmio_pref, distribute the resources to each hotplug
bridge, with the sizes calculated above.
The motivation for fixing this is enabling devices that require greater
than 1MB alignment. This fixes the case where the user hot-adds devices
with BAR alignment >1MB and Linux fails to assign resources to it.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=199581
Link: https://lore.kernel.org/r/PSXP216MB0438C2BFD0FD3691ED9C83F4803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
Reported-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Change pci_bus_distribute_available_resources() arguments from
resource_size_t to struct resource to add more information required to get
the alignment correct for bridge windows with alignment >1M.
We require (size, alignment), instead of just (size) which is what is
currently available. The change from resource_size_t to struct resource
does just that.
Note that the struct resource arguments are passed by value and not by
reference. We do not want to pass by reference and change the resource size
of the parent bridge window. We only want the size information.
No functional change intended.
Link: https://lore.kernel.org/r/PSXP216MB0438587C47CBEDF365B1EA27803C0@PSXP216MB0438.KORP216.PROD.OUTLOOK.COM
[bhelgaas: split parts to other patches to reduce the size of this one]
Signed-off-by: Nicholas Johnson <nicholas.johnson-opensource@outlook.com.au>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Pull y2038 updates from Arnd Bergmann:
"Core, driver and file system changes
These are updates to device drivers and file systems that for some
reason or another were not included in the kernel in the previous
y2038 series.
I've gone through all users of time_t again to make sure the kernel is
in a long-term maintainable state, replacing all remaining references
to time_t with safe alternatives.
Some related parts of the series were picked up into the nfsd, xfs,
alsa and v4l2 trees. A final set of patches in linux-mm removes the
now unused time_t/timeval/timespec types and helper functions after
all five branches are merged for linux-5.6, ensuring that no new users
get merged.
As a result, linux-5.6, or my backport of the patches to 5.4 [1],
should be the first release that can serve as a base for a 32-bit
system designed to run beyond year 2038, with a few remaining caveats:
- All user space must be compiled with a 64-bit time_t, which will be
supported in the coming musl-1.2 and glibc-2.32 releases, along
with installed kernel headers from linux-5.6 or higher.
- Applications that use the system call interfaces directly need to
be ported to use the time64 syscalls added in linux-5.1 in place of
the existing system calls. This impacts most users of futex() and
seccomp() as well as programming languages that have their own
runtime environment not based on libc.
- Applications that use a private copy of kernel uapi header files or
their contents may need to update to the linux-5.6 version, in
particular for sound/asound.h, xfs/xfs_fs.h, linux/input.h,
linux/elfcore.h, linux/sockios.h, linux/timex.h and
linux/can/bcm.h.
- A few remaining interfaces cannot be changed to pass a 64-bit
time_t in a compatible way, so they must be configured to use
CLOCK_MONOTONIC times or (with a y2106 problem) unsigned 32-bit
timestamps. Most importantly this impacts all users of 'struct
input_event'.
- All y2038 problems that are present on 64-bit machines also apply
to 32-bit machines. In particular this affects file systems with
on-disk timestamps using signed 32-bit seconds: ext4 with
ext3-style small inodes, ext2, xfs (to be fixed soon) and ufs"
[1] https://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground.git/log/?h=y2038-endgame
* tag 'y2038-drivers-for-v5.6-signed' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (21 commits)
Revert "drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC"
y2038: sh: remove timeval/timespec usage from headers
y2038: sparc: remove use of struct timex
y2038: rename itimerval to __kernel_old_itimerval
y2038: remove obsolete jiffies conversion functions
nfs: fscache: use timespec64 in inode auxdata
nfs: fix timstamp debug prints
nfs: use time64_t internally
sunrpc: convert to time64_t for expiry
drm/etnaviv: avoid deprecated timespec
drm/etnaviv: reject timeouts with tv_nsec >= NSEC_PER_SEC
drm/msm: avoid using 'timespec'
hfs/hfsplus: use 64-bit inode timestamps
hostfs: pass 64-bit timestamps to/from user space
packet: clarify timestamp overflow
tsacct: add 64-bit btime field
acct: stop using get_seconds()
um: ubd: use 64-bit time_t where possible
xtensa: ISS: avoid struct timeval
dlm: use SO_SNDTIMEO_NEW instead of SO_SNDTIMEO_OLD
...
Pull printk update from Petr Mladek:
"Prevent replaying log on all consoles"
* tag 'printk-for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
printk: fix exclusive_console replaying
Also make it available outside of epoll, along with the helper that
decides if we need to copy the passed in epoll_event.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for Intel Comet Lake PCH-V which is based on Intel Kaby
Lake. Difference between it and other Comet Lake variants is that former
uses previous iTCO version 4 and latter use version 6 like Intel Cannon
Lake PCH.
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In smbus-protocol.rst we use the text "Implemented by" for the same meaning
as "This corresponds to". Change everything to "Implemented by" for
coherency.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reported-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Some of the section names are not very clear. Reading those names in the
index.rst page does not help much in grasping what the content is supposed
to be.
Rename those sections to clarify their content, especially when reading
the index page.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Use a monospace (literal) formatting for better readability of sysfs
attributes and the "dummy" client name. This looks much more readable in
ReST-generated output.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This section applies only to code for very old kernels. Avoid people
reading this unnecessarily.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Use a monospace (literal) formatting for better readability of sysfs
attributes.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Among the "static" instantiation methods the "board file" method is
described first. Move it as last, since it is being replaced by the other
methods.
Also fix subsubsection heading syntax and remove the "Method 1[abc]"
prefix as the subsubsection structure clarifies the logical hierarchy.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Clarify from the beginning what these transactions are, and specifically
how they differ from the SMBus counterparts, i.e. the lack of a Count byte.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This clarifies these are functions (and would/will adds a hyperlink to the
function documentation if/when documented).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Hyperlinks from function names are not generated in headings. Move them in
the plain text so they are rendered as clickable hyperlinks.
While there also remove an unneeded colon in a heading.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Use the proper ACK and NACK naming from the I2C specification instead of
"accept" and "reverse accept".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
These colons are not needed: the columns already nicely separate the
symbols from their description. They are also inconsistently preceded by
whitespace.
Remove the colons completely to simplify and clean up.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In I2C there is no such thing as a "start bit" or a "stop bit". Use the
proper naming: "start condition" and "stop condition".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Use the proper ACK and NACK naming from the I2C specification instead of
"accept" and "reverse accept".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
These colons are not needed: the columns already nicely separate the
symbols from their description. They are also inconsistently preceded by
whitespace.
Remove the colons completely to simplify and clean up.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
In I2C there is no such thing as a "start bit" or a "stop bit". Use the
proper naming: "start condition" and "stop condition".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This clarifies these are functions and adds a hyperlink to the function
documentation.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
"I2C transfer" is a legitimate english sentence, no need for a hyphen
between the two words, as as such it is used in most of the
documentation. Remove the hyphen in the few places where it is present.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Uppercase "I2C" is used almost everywhere in the docs, but the lowercase
version "i2c" is used somewhere. Use the uppercase form consistently.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Peter Rosin <peda@axentia.se>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
This section, partly dating back to the pre-git era, is somewhat
unclear and partly incorrect. Rewrite it almost completely including a
reference figure, concise but precise definition of each term and the
paths where drivers are found. Particular care has been put in clarifying
the relation between adapter and algorithm, which has no correspondence
in the I2C spec terminology.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
- state the "official" name (I²C, not I2C, according to the spec) at
the beginning but keep using the more practical I2C elsewhere
- mention some known different names
- add link to the specification document
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
