Once the kthread is running and available
(i.e. @printk_kthreads_running is set), the kthread becomes
responsible for flushing any pending messages which are added
in NBCON_PRIO_NORMAL context. Namely the legacy
console_flush_all() and device_release() no longer flush the
console. And nbcon_atomic_flush_pending() used by
nbcon_cpu_emergency_exit() no longer flushes messages added
after the emergency messages.
The console context is safe when used by the kthread only when
one of the following conditions are true:
1. Other caller acquires the console context with
NBCON_PRIO_NORMAL with preemption disabled. It will
release the context before rescheduling.
2. Other caller acquires the console context with
NBCON_PRIO_NORMAL under the device_lock.
3. The kthread is the only context which acquires the console
with NBCON_PRIO_NORMAL.
This is satisfied for all atomic printing call sites:
nbcon_legacy_emit_next_record() (#1)
nbcon_atomic_flush_pending_con() (#1)
nbcon_device_release() (#2)
It is even double guaranteed when @printk_kthreads_running
is set because then _only_ the kthread will print for
NBCON_PRIO_NORMAL. (#3)
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-10-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
When printing via console_lock, the write_atomic() callback is
used for nbcon consoles. However, if it is known that the
current context is a task context, the write_thread() callback
can be used instead.
Using write_thread() instead of write_atomic() helps to reduce
large disabled preemption regions when the device_lock does not
disable preemption.
This is mainly a preparatory change to allow avoiding
write_atomic() completely during normal operation if boot
consoles are registered.
As a side-effect, it also allows consolidating the printing
code for legacy printing and the kthread printer.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-9-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Provide the main implementation for running a printer kthread
per nbcon console that is takeover/handover aware. This
includes:
- new mandatory write_thread() callback
- kthread creation
- kthread main printing loop
- kthread wakeup mechanism
- kthread shutdown
kthread creation is a bit tricky because consoles may register
before kthreads can be created. In such cases, registration
will succeed, even though no kthread exists. Once kthreads can
be created, an early_initcall will set @printk_kthreads_ready.
If there are no registered boot consoles, the early_initcall
creates the kthreads for all registered nbcon consoles. If
kthread creation fails, the related console is unregistered.
If there are registered boot consoles when
@printk_kthreads_ready is set, no kthreads are created until
the final boot console unregisters.
Once kthread creation finally occurs, @printk_kthreads_running
is set so that the system knows kthreads are available for all
registered nbcon consoles.
If @printk_kthreads_running is already set when the console
is registering, the kthread is created during registration. If
kthread creation fails, the registration will fail.
Until @printk_kthreads_running is set, console printing occurs
directly via the console_lock.
kthread shutdown on system shutdown/reboot is necessary to
ensure the printer kthreads finish their printing so that the
system can cleanly transition back to direct printing via the
console_lock in order to reliably push out the final
shutdown/reboot messages. @printk_kthreads_running is cleared
before shutting down the individual kthreads.
The kthread uses a new mandatory write_thread() callback that
is called with both device_lock() and the console context
acquired.
The console ownership handling is necessary for synchronization
against write_atomic() which is synchronized only via the
console context ownership.
The device_lock() serializes acquiring the console context with
NBCON_PRIO_NORMAL. It is needed in case the device_lock() does
not disable preemption. It prevents the following race:
CPU0 CPU1
[ task A ]
nbcon_context_try_acquire()
# success with NORMAL prio
# .unsafe == false; // safe for takeover
[ schedule: task A -> B ]
WARN_ON()
nbcon_atomic_flush_pending()
nbcon_context_try_acquire()
# success with EMERGENCY prio
# flushing
nbcon_context_release()
# HERE: con->nbcon_state is free
# to take by anyone !!!
nbcon_context_try_acquire()
# success with NORMAL prio [ task B ]
[ schedule: task B -> A ]
nbcon_enter_unsafe()
nbcon_context_can_proceed()
BUG: nbcon_context_can_proceed() returns "true" because
the console is owned by a context on CPU0 with
NBCON_PRIO_NORMAL.
But it should return "false". The console is owned
by a context from task B and we do the check
in a context from task A.
Note that with these changes, the printer kthreads do not yet
take over full responsibility for nbcon printing during normal
operation. These changes only focus on the lifecycle of the
kthreads.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-7-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
When initializing an nbcon console, have nbcon_alloc() set
@nbcon_seq to the highest possible sequence number. For all
practical purposes, this will guarantee that the console
will have nothing to print until later when @nbcon_seq is
set to the proper initial printing value.
This will be particularly important once kthread printing is
introduced because nbcon_alloc() can create/start the kthread
before the desired initial sequence number is known.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-6-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
The nbcon consoles will have two callbacks to be used for
different contexts. In order to determine if an nbcon console
is usable, console_is_usable() must know if it is a context
that will need to use the optional write_atomic() callback.
Also, nbcon_emit_next_record() must know which callback it
needs to call.
Add an extra parameter @use_atomic to console_is_usable() and
nbcon_emit_next_record() to specify this.
Since so far only the write_atomic() callback exists,
@use_atomic is set to true for all call sites.
For legacy consoles, @use_atomic is not used.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-5-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Since ownership can be lost at any time due to handover or
takeover, a printing context _must_ be prepared to back out
immediately and carefully. However, there are scenarios where
the printing context must reacquire ownership in order to
finalize or revert hardware changes.
One such example is when interrupts are disabled during
printing. No other context will automagically re-enable the
interrupts. For this case, the disabling context _must_
reacquire nbcon ownership so that it can re-enable the
interrupts.
Provide nbcon_reacquire_nobuf() for exactly this purpose. It
allows a printing context to reacquire ownership using the same
priority as its previous ownership.
Note that after a successful reacquire the printing context
will have no output buffer because that has been lost. This
function cannot be used to resume printing.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20240904120536.115780-2-john.ogness@linutronix.de
Signed-off-by: Petr Mladek <pmladek@suse.com>
Building the kernel with W=1 generates the following warning:
kernel/cpu.c:2693: warning: This comment starts with '/**',
but isn't a kernel-doc comment.
The function topology_is_core_online() is a simple helper function and
doesn't need a kernel-doc comment.
Use a normal comment instead.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240825221152.71951-2-thorsten.blum@toblux.com
Global timers could be expired remotely when the target CPU is idle. After
a remote timer expiry, the remote timer_base->next_expiry value is updated
while holding the timer_base->lock. When the formerly idle CPU becomes
active at the same time and checks whether timers need to expire, this
check is done lockless as it is on the local CPU. This could lead to a data
race, which was reported by sysbot:
https://lore.kernel.org/r/000000000000916e55061f969e14@google.com
When the value is read lockless but changed by the remote CPU, only two non
critical scenarios could happen:
1) The already update value is read -> everything is perfect
2) The old value is read -> a superfluous timer soft interrupt is raised
The same situation could happen when enqueueing a new first pinned timer by
a remote CPU also with non critical scenarios:
1) The already update value is read -> everything is perfect
2) The old value is read -> when the CPU is idle, an IPI is executed
nevertheless and when the CPU isn't idle, the updated value will be visible
on the next tick and the timer might be late one jiffie.
As this is very unlikely to happen, the overhead of doing the check under
the lock is a way more effort, than a superfluous timer soft interrupt or a
possible 1 jiffie delay of the timer.
Document and annotate this non critical behavior in the code by using
READ/WRITE_ONCE() pair when accessing timer_base->next_expiry.
Reported-by: syzbot+bf285fcc0a048e028118@syzkaller.appspotmail.com
Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/all/20240829154305.19259-1-anna-maria@linutronix.de
Closes: https://lore.kernel.org/lkml/000000000000916e55061f969e14@google.com
With sched_ext converted to use put_prev_task() for class switch detection,
there's no user of switch_class() left. Drop it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Now that put_prev_task_scx() is called with @next on task switches, there's
no reason to use sched_class.switch_class(). Rename switch_class_scx() to
switch_class() and call it from put_prev_task_scx().
Signed-off-by: Tejun Heo <tj@kernel.org>
Because the BPF scheduler's dispatch path is invoked from balance(),
sched_ext needs to invoke balance_one() on all sibling rq's before picking
the next task for core-sched.
Before the recent pick_next_task() updates, sched_ext couldn't share pick
task between regular and core-sched paths because pick_next_task() depended
on put_prev_task() being called on the current task. Tasks currently running
on sibling rq's can't be put when one rq is trying to pick the next task, so
pick_task_scx() had to have a separate mechanism to pick between a sibling
rq's current task and the first task in its local DSQ.
However, with the preceding updates, pick_next_task_scx() no longer depends
on the current task being put and can compare the current task and the next
in line statelessly, and the pick task logic should be shareable between
regular and core-sched paths.
Unify regular and core-sched pick task paths:
- There's no reason to distinguish local and sibling picks anymore. @local
is removed from balance_one().
- pick_next_task_scx() is turned into pick_task_scx() by dropping the
put_prev_set_next_task() call.
- The old pick_task_scx() is dropped.
Signed-off-by: Tejun Heo <tj@kernel.org>
SCX_TASK_BAL_KEEP is used by balance_one() to tell pick_next_task_scx() to
keep running the current task. It's not really a task property. Replace it
with SCX_RQ_BAL_KEEP which resides in rq->scx.flags and is a better fit for
the usage. Also, the existing clearing rule is unnecessarily strict and
makes it difficult to use with core-sched. Just clear it on entry to
balance_one().
Signed-off-by: Tejun Heo <tj@kernel.org>
fd03c5b858 ("sched: Rework pick_next_task()") changed the definition of
pick_next_task() from:
pick_next_task() := pick_task() + set_next_task(.first = true)
to:
pick_next_task(prev) := pick_task() + put_prev_task() + set_next_task(.first = true)
making invoking put_prev_task() pick_next_task()'s responsibility. This
reordering allows pick_task() to be shared between regular and core-sched
paths and put_prev_task() to know the next task.
sched_ext depended on put_prev_task_scx() enqueueing the current task before
pick_next_task_scx() is called. While pulling sched/core changes,
70cc76aa0d80 ("Merge branch 'tip/sched/core' into for-6.12") added an
explicit put_prev_task_scx() call for SCX tasks in pick_next_task_scx()
before picking the first task as a workaround.
Clean it up and adopt the conventions that other sched classes are
following.
The operation of keeping running the current task was spread and required
the task to be put on the local DSQ before picking:
- balance_one() used SCX_TASK_BAL_KEEP to indicate that the task is still
runnable, hasn't exhausted its slice, and thus should keep running.
- put_prev_task_scx() enqueued the task to local DSQ if SCX_TASK_BAL_KEEP
is set. It also called do_enqueue_task() with SCX_ENQ_LAST if it is the
only runnable task. do_enqueue_task() in turn decided whether to use the
local DSQ depending on SCX_OPS_ENQ_LAST.
Consolidate the logic in balance_one() as it always knows whether it is
going to keep the current task. balance_one() now considers all conditions
where the current task should be kept and uses SCX_TASK_BAL_KEEP to tell
pick_next_task_scx() to keep the current task instead of picking one from
the local DSQ. Accordingly, SCX_ENQ_LAST handling is removed from
put_prev_task_scx() and do_enqueue_task() and pick_next_task_scx() is
updated to pick the current task if SCX_TASK_BAL_KEEP is set.
The workaround put_prev_task[_scx]() calls are replaced with
put_prev_set_next_task().
This causes two behavior changes observable from the BPF scheduler:
- When a task keep running, it no longer goes through enqueue/dequeue cycle
and thus ops.stopping/running() transitions. The new behavior is better
and all the existing schedulers should be able to handle the new behavior.
- The BPF scheduler cannot keep executing the current task by enqueueing
SCX_ENQ_LAST task to the local DSQ. If SCX_OPS_ENQ_LAST is specified, the
BPF scheduler is responsible for resuming execution after each
SCX_ENQ_LAST. SCX_OPS_ENQ_LAST is mostly useful for cases where scheduling
decisions are not made on the local CPU - e.g. central or userspace-driven
schedulin - and the new behavior is more logical and shouldn't pose any
problems. SCX_OPS_ENQ_LAST demonstration from scx_qmap is dropped as it
doesn't fit that well anymore and the last task handling is moved to the
end of qmap_dispatch().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: David Vernet <void@manifault.com>
Cc: Andrea Righi <righi.andrea@gmail.com>
Cc: Changwoo Min <multics69@gmail.com>
Cc: Daniel Hodges <hodges.daniel.scott@gmail.com>
Cc: Dan Schatzberg <schatzberg.dan@gmail.com>
Problem statement:
Since commit fc137c0dda ("sched/numa: enhance vma scanning logic"), the
Numa vma scan overhead has been reduced a lot. Meanwhile, the reducing of
the vma scan might create less Numa page fault information. The
insufficient information makes it harder for the Numa balancer to make
decision. Later, commit b7a5b537c5 ("sched/numa: Complete scanning of
partial VMAs regardless of PID activity") and commit 84db47ca71
("sched/numa: Fix mm numa_scan_seq based unconditional scan") are found to
bring back part of the performance.
Recently when running SPECcpu omnetpp_r on a 320 CPUs/2 Sockets system, a
long duration of remote Numa node read was observed by PMU events: A few
cores having ~500MB/s remote memory access for ~20 seconds. It causes
high core-to-core variance and performance penalty. After the
investigation, it is found that many vmas are skipped due to the active
PID check. According to the trace events, in most cases,
vma_is_accessed() returns false because the history access info stored in
pids_active array has been cleared.
Proposal:
The main idea is to adjust vma_is_accessed() to let it return true easier.
Thus compare the diff between mm->numa_scan_seq and
vma->numab_state->prev_scan_seq. If the diff has exceeded the threshold,
scan the vma.
This patch especially helps the cases where there are small number of
threads, like the process-based SPECcpu. Without this patch, if the
SPECcpu process access the vma at the beginning, then sleeps for a long
time, the pid_active array will be cleared. A a result, if this process
is woken up again, it never has a chance to set prot_none anymore.
Because only the first 2 times of access is granted for vma scan:
(current->mm->numa_scan_seq) - vma->numab_state->start_scan_seq) < 2 to be
worse, no other threads within the task can help set the prot_none. This
causes information lost.
Raghavendra helped test current patch and got the positive result
on the AMD platform:
autonumabench NUMA01
base patched
Amean syst-NUMA01 194.05 ( 0.00%) 165.11 * 14.92%*
Amean elsp-NUMA01 324.86 ( 0.00%) 315.58 * 2.86%*
Duration User 380345.36 368252.04
Duration System 1358.89 1156.23
Duration Elapsed 2277.45 2213.25
autonumabench NUMA02
Amean syst-NUMA02 1.12 ( 0.00%) 1.09 * 2.93%*
Amean elsp-NUMA02 3.50 ( 0.00%) 3.56 * -1.84%*
Duration User 1513.23 1575.48
Duration System 8.33 8.13
Duration Elapsed 28.59 29.71
kernbench
Amean user-256 22935.42 ( 0.00%) 22535.19 * 1.75%*
Amean syst-256 7284.16 ( 0.00%) 7608.72 * -4.46%*
Amean elsp-256 159.01 ( 0.00%) 158.17 * 0.53%*
Duration User 68816.41 67615.74
Duration System 21873.94 22848.08
Duration Elapsed 506.66 504.55
Intel 256 CPUs/2 Sockets:
autonuma benchmark also shows improvements:
v6.10-rc5 v6.10-rc5
+patch
Amean syst-NUMA01 245.85 ( 0.00%) 230.84 * 6.11%*
Amean syst-NUMA01_THREADLOCAL 205.27 ( 0.00%) 191.86 * 6.53%*
Amean syst-NUMA02 18.57 ( 0.00%) 18.09 * 2.58%*
Amean syst-NUMA02_SMT 2.63 ( 0.00%) 2.54 * 3.47%*
Amean elsp-NUMA01 517.17 ( 0.00%) 526.34 * -1.77%*
Amean elsp-NUMA01_THREADLOCAL 99.92 ( 0.00%) 100.59 * -0.67%*
Amean elsp-NUMA02 15.81 ( 0.00%) 15.72 * 0.59%*
Amean elsp-NUMA02_SMT 13.23 ( 0.00%) 12.89 * 2.53%*
v6.10-rc5 v6.10-rc5
+patch
Duration User 1064010.16 1075416.23
Duration System 3307.64 3104.66
Duration Elapsed 4537.54 4604.73
The SPECcpu remote node access issue disappears with the patch applied.
Link: https://lkml.kernel.org/r/20240827112958.181388-1-yu.c.chen@intel.com
Fixes: fc137c0dda ("sched/numa: enhance vma scanning logic")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Co-developed-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Reported-by: Xiaoping Zhou <xiaoping.zhou@intel.com>
Reviewed-and-tested-by: Raghavendra K T <raghavendra.kt@amd.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: "Chen, Tim C" <tim.c.chen@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Raghavendra K T <raghavendra.kt@amd.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
By using a few values in the top byte, users of page_type can store up to
24 bits of additional data in page_type. It also reduces the code size as
(with replacement of READ_ONCE() with data_race()), the kernel can check
just a single byte. eg:
ffffffff811e3a79: 8b 47 30 mov 0x30(%rdi),%eax
ffffffff811e3a7c: 55 push %rbp
ffffffff811e3a7d: 48 89 e5 mov %rsp,%rbp
ffffffff811e3a80: 25 00 00 00 82 and $0x82000000,%eax
ffffffff811e3a85: 3d 00 00 00 80 cmp $0x80000000,%eax
ffffffff811e3a8a: 74 4d je ffffffff811e3ad9 <folio_mapping+0x69>
becomes:
ffffffff811e3a69: 80 7f 33 f5 cmpb $0xf5,0x33(%rdi)
ffffffff811e3a6d: 55 push %rbp
ffffffff811e3a6e: 48 89 e5 mov %rsp,%rbp
ffffffff811e3a71: 74 4d je ffffffff811e3ac0 <folio_mapping+0x60>
replacing three instructions with one.
[wangkefeng.wang@huawei.com: fix ubsan warnings]
Link: https://lkml.kernel.org/r/2d19c48a-c550-4345-bf36-d05cd303c5de@huawei.com
Link: https://lkml.kernel.org/r/20240821173914.2270383-4-willy@infradead.org
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the CMA allocation succeeds but isn't addressable, its buffer has
already been released and the page is set to NULL. So later when the
normal page allocation succeeds but isn't addressable, __free_pages()
can be used to free that normal page rather than using
dma_free_contiguous that does extra checks that are not needed.
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMA ops are a helper for architectures and not for drivers to override
the DMA implementation.
Unfortunately driver authors keep ignoring this. Make the fact more
clear by renaming the symbol to ARCH_HAS_DMA_OPS and having the two drivers
overriding their dma_ops depend on that. These drivers should probably be
marked broken, but we can give them a bit of a grace period for that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> # for IPU6
Acked-by: Robin Murphy <robin.murphy@arm.com>
- Resolve trivial context conflicts from dl_server clearing being moved
around.
- Add @next to put_prev_task_scx() and @prev to pick_next_task_scx() to
match sched/core.
- Merge sched_class->switch_class() addition from sched_ext with
tip/sched/core changes in __pick_next_task().
- Make pick_next_task_scx() call put_prev_task_scx() to emulate the previous
behavior where sched_class->put_prev_task() was called before
sched_class->pick_next_task().
While this makes sched_ext build and function, the behavior is not in line
with other sched classes. The follow-up patches will address the
discrepancies and remove sched_class->switch_class().
Signed-off-by: Tejun Heo <tj@kernel.org>
Use str_enabled_disabled() helper instead of open
coding the same.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
In order to tell the previous sched_class what the next task is, add
put_prev_task(.next).
Notable SCX will use this to:
1) determine the next task will leave the SCX sched class and push
the current task to another CPU if possible.
2) statistics on how often and which other classes preempt it
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.367421076@infradead.org
When a task is selected through a dl_server, it will have p->dl_server
set, such that it can account runtime to the dl_server, see
update_curr_task().
Currently p->dl_server is set in pick*task() whenever it goes through
the dl_server, clearing it is a bit of a mess though. The trivial
solution is clearing it on the final put (now that we have this
location).
However, this gives a problem when:
p = pick_task(rq);
if (p)
put_prev_set_next_task(rq, prev, next);
picks the same task but through a different path, notably when it goes
from picking through the dl_server to a direct pick or vice-versa. In
that case we cannot readily determine wether we should clear or
preserve p->dl_server.
An additional complication is pick_*task() setting p->dl_server for a
remote pick, it might still need to update runtime before it schedules
the core_pick.
Close all these holes and remove all the random clearing of
p->dl_server by:
- having pick_*task() manage rq->dl_server
- having the final put_prev_task() clear p->dl_server
- having the first set_next_task() set p->dl_server = rq->dl_server
- complicate the core_sched code to save/restore rq->dl_server where
appropriate.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.259853414@infradead.org
The current rule is that:
pick_next_task() := pick_task() + set_next_task(.first = true)
And many classes implement it directly as such. Change things around
to make pick_next_task() optional while also changing the definition to:
pick_next_task(prev) := pick_task() + put_prev_task() + set_next_task(.first = true)
The reason is that sched_ext would like to have a 'final' call that
knows the next task. By placing put_prev_task() right next to
set_next_task() (as it already is for sched_core) this becomes
trivial.
As a bonus, this is a nice cleanup on its own.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20240813224016.051225657@infradead.org
__sched_setscheduler() goes through an enqueue/dequeue cycle like so:
flags := DEQUEUE_SAVE | DEQUEUE_MOVE | DEQUEUE_NOCLOCK;
prev_class->dequeue_task(rq, p, flags);
new_class->enqueue_task(rq, p, flags);
when prev_class := fair_sched_class, this is followed by:
dequeue_task(rq, p, DEQUEUE_NOCLOCK | DEQUEUE_SLEEP);
the idea being that since the task has switched classes, we need to drop
the sched_delayed logic and have that task be deactivated per its previous
dequeue_task(..., DEQUEUE_SLEEP).
Unfortunately, this leaves the task on_rq. This is missing the tail end of
dequeue_entities() that issues __block_task(), which __sched_setscheduler()
won't have done due to not using DEQUEUE_DELAYED - not that it should, as
it is pretty much a fair_sched_class specific thing.
Make switched_from_fair() properly deactivate sched_delayed tasks upon
class changes via __block_task(), as if a
dequeue_task(..., DEQUEUE_DELAYED)
had been issued.
Fixes: 2e0199df25 ("sched/fair: Prepare exit/cleanup paths for delayed_dequeue")
Reported-by: "Paul E. McKenney" <paulmck@kernel.org>
Reported-by: Chen Yu <yu.c.chen@intel.com>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20240829135353.1524260-1-vschneid@redhat.com
In dl_server_start(), when schedstats is enabled, the following
happens:
dl_server_start()
dl_se->dl_server = 1;
enqueue_dl_entity()
update_stats_enqueue_dl()
__schedstats_from_dl_se()
dl_task_of()
BUG_ON(dl_server(dl_se));
Since only tasks have schedstats and internal entries do not, avoid
trying to update stats in this case.
Fixes: 63ba8422f8 ("sched/deadline: Introduce deadline servers")
Signed-off-by: Huang Shijie <shijie@os.amperecomputing.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lkml.kernel.org/r/20240829031111.12142-1-shijie@os.amperecomputing.com
When analyzing a kernel waring message, Peter pointed out that there is a
race condition when the kworker is being frozen and falls into
try_to_freeze() with TASK_INTERRUPTIBLE, which could trigger a
might_sleep() warning in try_to_freeze(). Although the root cause is not
related to freeze()[1], it is still worthy to fix this issue ahead.
One possible race scenario:
CPU 0 CPU 1
----- -----
// kthread_worker_fn
set_current_state(TASK_INTERRUPTIBLE);
suspend_freeze_processes()
freeze_processes
static_branch_inc(&freezer_active);
freeze_kernel_threads
pm_nosig_freezing = true;
if (work) { //false
__set_current_state(TASK_RUNNING);
} else if (!freezing(current)) //false, been frozen
freezing():
if (static_branch_unlikely(&freezer_active))
if (pm_nosig_freezing)
return true;
schedule()
}
// state is still TASK_INTERRUPTIBLE
try_to_freeze()
might_sleep() <--- warning
Fix this by explicitly set the TASK_RUNNING before entering
try_to_freeze().
Link: https://lore.kernel.org/lkml/Zs2ZoAcUsZMX2B%2FI@chenyu5-mobl2/ [1]
Link: https://lkml.kernel.org/r/20240827112308.181081-1-yu.c.chen@intel.com
Fixes: b56c0d8937 ("kthread: implement kthread_worker")
Signed-off-by: Chen Yu <yu.c.chen@intel.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: David Gow <davidgow@google.com>
Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Mickaël Salaün <mic@digikod.net>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When watchdog_hardlockup_probe() is being called by
lockup_detector_delay_init(), an error return of -ENODEV will happen
for the arm64 arch when arch_perf_nmi_is_available() returns false. This
means that NMI is not usable by the hard lockup detector and so has to
be disabled. This can be considered a deficiency in that particular
arm64 chip, but there is nothing we can do about it. That also means
the following error will always be reported when the kernel boot up.
watchdog: Delayed init of the lockup detector failed: -19
The word "failed" itself has a connotation that there is something
wrong with the kernel which is not really the case here. Handle this
special ENODEV case separately and explain the reason behind disabling
hard lockup detector without causing anxiety for those users who read
the above message and wonder about it.
Link: https://lkml.kernel.org/r/20240802151621.617244-1-longman@redhat.com
Signed-off-by: Waiman Long <longman@redhat.com>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Joel Granados <j.granados@samsung.com>
Cc: Li Zhe <lizhe.67@bytedance.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
On x86_32 Qemu machine with 1GB memory, the cmdline "crashkernel=4G" is ok
as below:
crashkernel reserved: 0x0000000020000000 - 0x0000000120000000 (4096 MB)
It's similar on other architectures, such as ARM32 and RISCV32.
The cause is that the crash_size is parsed and printed with "unsigned long
long" data type which is 8 bytes but allocated used with "phys_addr_t"
which is 4 bytes in memblock_phys_alloc_range().
Fix it by checking if crash_size is greater than system RAM size and
return error if so.
After this patch, there is no above confusing reserve success info.
Link: https://lkml.kernel.org/r/20240729115252.1659112-1-ruanjinjie@huawei.com
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Mike Rapoport <rppt@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Dave Young <dyoung@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm, memcg: cg2 memory{.swap,}.peak write handlers", v7.
This patch (of 2):
Other mechanisms for querying the peak memory usage of either a process or
v1 memory cgroup allow for resetting the high watermark. Restore parity
with those mechanisms, but with a less racy API.
For example:
- Any write to memory.max_usage_in_bytes in a cgroup v1 mount resets
the high watermark.
- writing "5" to the clear_refs pseudo-file in a processes's proc
directory resets the peak RSS.
This change is an evolution of a previous patch, which mostly copied the
cgroup v1 behavior, however, there were concerns about races/ownership
issues with a global reset, so instead this change makes the reset
filedescriptor-local.
Writing any non-empty string to the memory.peak and memory.swap.peak
pseudo-files reset the high watermark to the current usage for subsequent
reads through that same FD.
Notably, following Johannes's suggestion, this implementation moves the
O(FDs that have written) behavior onto the FD write(2) path. Instead, on
the page-allocation path, we simply add one additional watermark to
conditionally bump per-hierarchy level in the page-counter.
Additionally, this takes Longman's suggestion of nesting the
page-charging-path checks for the two watermarks to reduce the number of
common-case comparisons.
This behavior is particularly useful for work scheduling systems that need
to track memory usage of worker processes/cgroups per-work-item. Since
memory can't be squeezed like CPU can (the OOM-killer has opinions), these
systems need to track the peak memory usage to compute system/container
fullness when binpacking workitems.
Most notably, Vimeo's use-case involves a system that's doing global
binpacking across many Kubernetes pods/containers, and while we can use
PSI for some local decisions about overload, we strive to avoid packing
workloads too tightly in the first place. To facilitate this, we track
the peak memory usage. However, since we run with long-lived workers (to
amortize startup costs) we need a way to track the high watermark while a
work-item is executing. Polling runs the risk of missing short spikes
that last for timescales below the polling interval, and peak memory
tracking at the cgroup level is otherwise perfect for this use-case.
As this data is used to ensure that binpacked work ends up with sufficient
headroom, this use-case mostly avoids the inaccuracies surrounding
reclaimable memory.
Link: https://lkml.kernel.org/r/20240730231304.761942-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-1-davidf@vimeo.com
Link: https://lkml.kernel.org/r/20240729143743.34236-2-davidf@vimeo.com
Signed-off-by: David Finkel <davidf@vimeo.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Waiman Long <longman@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Acked-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
