mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-02-22 03:00:30 -05:00
edcef667070f7dbddca403e6331c86940407dae0
13874 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Dmitry V. Levin
|
733a90561a |
MIPS: fix mips_get_syscall_arg() for o32
This makes ptrace/get_syscall_info selftest pass on mips o32 and
mips64 o32 by fixing the following two test assertions:
1. get_syscall_info test assertion on mips o32:
# get_syscall_info.c:218:get_syscall_info:Expected exp_args[5] (3134521044) == info.entry.args[4] (4911432)
# get_syscall_info.c:219:get_syscall_info:wait #1: entry stop mismatch
2. get_syscall_info test assertion on mips64 o32:
# get_syscall_info.c:209:get_syscall_info:Expected exp_args[2] (3134324433) == info.entry.args[1] (18446744072548908753)
# get_syscall_info.c:210:get_syscall_info:wait #1: entry stop mismatch
The first assertion happens due to mips_get_syscall_arg() trying to access
another task's context but failing to do it properly because get_user() it
calls just peeks at the current task's context. It usually does not crash
because the default user stack always gets assigned the same VMA, but it
is pure luck which mips_get_syscall_arg() wouldn't have if e.g. the stack
was switched (via setcontext(3) or however) or a non-default process's
thread peeked at, and in any case irrelevant data is obtained just as
observed with the test case.
mips_get_syscall_arg() ought to be using access_remote_vm() instead to
retrieve the other task's stack contents, but given that the data has been
already obtained and saved in `struct pt_regs' it would be an overkill.
The first assertion is fixed for mips o32 by using struct pt_regs.args
instead of get_user() to obtain syscall arguments. This approach works
due to this piece in arch/mips/kernel/scall32-o32.S:
/*
* Ok, copy the args from the luser stack to the kernel stack.
*/
.set push
.set noreorder
.set nomacro
load_a4: user_lw(t5, 16(t0)) # argument #5 from usp
load_a5: user_lw(t6, 20(t0)) # argument #6 from usp
load_a6: user_lw(t7, 24(t0)) # argument #7 from usp
load_a7: user_lw(t8, 28(t0)) # argument #8 from usp
loads_done:
sw t5, PT_ARG4(sp) # argument #5 to ksp
sw t6, PT_ARG5(sp) # argument #6 to ksp
sw t7, PT_ARG6(sp) # argument #7 to ksp
sw t8, PT_ARG7(sp) # argument #8 to ksp
.set pop
.section __ex_table,"a"
PTR_WD load_a4, bad_stack_a4
PTR_WD load_a5, bad_stack_a5
PTR_WD load_a6, bad_stack_a6
PTR_WD load_a7, bad_stack_a7
.previous
arch/mips/kernel/scall64-o32.S has analogous code for mips64 o32 that
allows fixing the issue by obtaining syscall arguments from struct
pt_regs.regs[4..11] instead of the erroneous use of get_user().
The second assertion is fixed by truncating 64-bit values to 32-bit
syscall arguments.
Fixes:
|
||
|
Maciej W. Rozycki
|
ed975485a1 |
MIPS: Export syscall stack arguments properly for remote use
We have several places across the kernel where we want to access another
task's syscall arguments, such as ptrace(2), seccomp(2), etc., by making
a call to syscall_get_arguments().
This works for register arguments right away by accessing the task's
`regs' member of `struct pt_regs', however for stack arguments seen with
32-bit/o32 kernels things are more complicated. Technically they ought
to be obtained from the user stack with calls to an access_remote_vm(),
but we have an easier way available already.
So as to be able to access syscall stack arguments as regular function
arguments following the MIPS calling convention we copy them over from
the user stack to the kernel stack in arch/mips/kernel/scall32-o32.S, in
handle_sys(), to the current stack frame's outgoing argument space at
the top of the stack, which is where the handler called expects to see
its incoming arguments. This area is also pointed at by the `pt_regs'
pointer obtained by task_pt_regs().
Make the o32 stack argument space a proper member of `struct pt_regs'
then, by renaming the existing member from `pad0' to `args' and using
generated offsets to access the space. No functional change though.
With the change in place the o32 kernel stack frame layout at the entry
to a syscall handler invoked by handle_sys() is therefore as follows:
$sp + 68 -> | ... | <- pt_regs.regs[9]
+---------------------+
$sp + 64 -> | $t0 | <- pt_regs.regs[8]
+---------------------+
$sp + 60 -> | $a3/argument #4 | <- pt_regs.regs[7]
+---------------------+
$sp + 56 -> | $a2/argument #3 | <- pt_regs.regs[6]
+---------------------+
$sp + 52 -> | $a1/argument #2 | <- pt_regs.regs[5]
+---------------------+
$sp + 48 -> | $a0/argument #1 | <- pt_regs.regs[4]
+---------------------+
$sp + 44 -> | $v1 | <- pt_regs.regs[3]
+---------------------+
$sp + 40 -> | $v0 | <- pt_regs.regs[2]
+---------------------+
$sp + 36 -> | $at | <- pt_regs.regs[1]
+---------------------+
$sp + 32 -> | $zero | <- pt_regs.regs[0]
+---------------------+
$sp + 28 -> | stack argument #8 | <- pt_regs.args[7]
+---------------------+
$sp + 24 -> | stack argument #7 | <- pt_regs.args[6]
+---------------------+
$sp + 20 -> | stack argument #6 | <- pt_regs.args[5]
+---------------------+
$sp + 16 -> | stack argument #5 | <- pt_regs.args[4]
+---------------------+
$sp + 12 -> | psABI space for $a3 | <- pt_regs.args[3]
+---------------------+
$sp + 8 -> | psABI space for $a2 | <- pt_regs.args[2]
+---------------------+
$sp + 4 -> | psABI space for $a1 | <- pt_regs.args[1]
+---------------------+
$sp + 0 -> | psABI space for $a0 | <- pt_regs.args[0]
+---------------------+
holding user data received and with the first 4 frame slots reserved by
the psABI for the compiler to spill the incoming arguments from $a0-$a3
registers (which it sometimes does according to its needs) and the next
4 frame slots designated by the psABI for any stack function arguments
that follow. This data is also available for other tasks to peek/poke
at as reqired and where permitted.
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
||
|
Linus Torvalds
|
c270ab5a87 |
Merge tag 'mips_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer: "Revert commit breaking sysv ipc for o32 ABI" * tag 'mips_6.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: Revert "mips: fix shmctl/semctl/msgctl syscall for o32" |
||
|
Thomas Bogendoerfer
|
ec918a11e6 |
Revert "mips: fix shmctl/semctl/msgctl syscall for o32"
This reverts commit
|
||
|
Linus Torvalds
|
13845bdc86 |
Merge tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO driver updates from Greg KH:
"Here is the "big" set of char/misc/iio and other smaller driver
subsystem updates for 6.14-rc1. Loads of different things in here this
development cycle, highlights are:
- ntsync "driver" to handle Windows locking types enabling Wine to
work much better on many workloads (i.e. games). The driver
framework was in 6.13, but now it's enabled and fully working
properly. Should make many SteamOS users happy. Even comes with
tests!
- Large IIO driver updates and bugfixes
- FPGA driver updates
- Coresight driver updates
- MHI driver updates
- PPS driver updatesa
- const bin_attribute reworking for many drivers
- binder driver updates
- smaller driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
ntsync: Fix reference leaks in the remaining create ioctls.
spmi: hisi-spmi-controller: Drop duplicated OF node assignment in spmi_controller_probe()
spmi: Set fwnode for spmi devices
ntsync: fix a file reference leak in drivers/misc/ntsync.c
scripts/tags.sh: Don't tag usages of DECLARE_BITMAP
dt-bindings: interconnect: qcom,msm8998-bwmon: Add SM8750 CPU BWMONs
dt-bindings: interconnect: OSM L3: Document sm8650 OSM L3 compatible
dt-bindings: interconnect: qcom-bwmon: Document QCS615 bwmon compatibles
interconnect: sm8750: Add missing const to static qcom_icc_desc
memstick: core: fix kernel-doc notation
intel_th: core: fix kernel-doc warnings
binder: log transaction code on failure
iio: dac: ad3552r-hs: clear reset status flag
iio: dac: ad3552r-common: fix ad3541/2r ranges
iio: chemical: bme680: Fix uninitialized variable in __bme680_read_raw()
misc: fastrpc: Fix copy buffer page size
misc: fastrpc: Fix registered buffer page address
misc: fastrpc: Deregister device nodes properly in error scenarios
nvmem: core: improve range check for nvmem_cell_write()
nvmem: qcom-spmi-sdam: Set size in struct nvmem_config
...
|
||
|
Linus Torvalds
|
805ba04cb7 |
Merge tag 'mips_6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: "Cleanups and fixes" * tag 'mips_6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: pci-legacy: Override pci_address_to_pio MIPS: Loongson64: env: Use str_on_off() helper in prom_lefi_init_env() MIPS: migrate to generic rule for built-in DTBs mips: fix shmctl/semctl/msgctl syscall for o32 mips/math-emu: fix emulation of the prefx instruction MIPS: Loongson: Add comments for interface_info MIPS: Loongson64: remove ROM Size unit in boardinfo MIPS: traps: Use str_enabled_disabled() in parity_protection_init() MIPS: ftrace: Declare ftrace_get_parent_ra_addr() as static Revert "MIPS: csrc-r4k: Select HAVE_UNSTABLE_SCHED_CLOCK if SMP && 64BIT" MIPS: Fix the wrong format specifier MIPS: Add a blank line after __HEAD MIPS: kernel: Rename read/write_c0_ecc to read/writec0_errctl |
||
|
Linus Torvalds
|
9c5968db9e |
Merge tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
|
||
|
Guo Weikang
|
c6f239796b |
mm/memblock: add memblock_alloc_or_panic interface
Before SLUB initialization, various subsystems used memblock_alloc to allocate memory. In most cases, when memory allocation fails, an immediate panic is required. To simplify this behavior and reduce repetitive checks, introduce `memblock_alloc_or_panic`. This function ensures that memory allocation failures result in a panic automatically, improving code readability and consistency across subsystems that require this behavior. [guoweikang.kernel@gmail.com: arch/s390: save_area_alloc default failure behavior changed to panic] Link: https://lkml.kernel.org/r/20250109033136.2845676-1-guoweikang.kernel@gmail.com Link: https://lore.kernel.org/lkml/Z2fknmnNtiZbCc7x@kernel.org/ Link: https://lkml.kernel.org/r/20250102072528.650926-1-guoweikang.kernel@gmail.com Signed-off-by: Guo Weikang <guoweikang.kernel@gmail.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390] Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Lorenzo Stoakes
|
c4f1b56f3f |
mips: vdso: prefer do_mmap() to mmap_region()
Patch series "mm: update mips to use do_mmap(), make mmap_region() internal". Currently the only user of mmap_region() outside of the memory management code is the MIPS VDSO implementation. This uses mmap_region() to map a 'delay slot emulation page' at the top of the stack which is read-only and executable. This mapping requires that an already-acquired mmap write lock is utilised and that uffd and populate logic is ignored. This rules out vm_mmap(), however do_mmap() fits the bill. Adapt this code to use do_mmap() and then once done, make mmap_region() internal and userland testable, and avoid any other uses of mmap_region(), which is absolutely and strictly an internal mm function which bypasses a great number of checks and logic. This patch (of 2): mmap_region() is an internal memory management implementation detail that is not intended to be used outside of the memory management subsystem. Map the delay slot emulation page using do_mmap() which makes use of the already-held mmap write lock and bypasses unneeded populate and userfaultfd logic. This should have the precise same behaviour as the existing logic. Link: https://lkml.kernel.org/r/cover.1735819274.git.lorenzo.stoakes@oracle.com Link: https://lkml.kernel.org/r/ef076e381570f709e5c2c142dc030ec5b3309a0e.1735819274.git.lorenzo.stoakes@oracle.com Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@Oracle.com> Cc: Jann Horn <jannh@google.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Kevin Brodsky
|
a9b3c355c2 |
asm-generic: pgalloc: provide generic __pgd_{alloc,free}
We already have a generic implementation of alloc/free up to P4D level, as
well as pgd_free(). Let's finish the work and add a generic PGD-level
alloc helper as well.
Unlike at lower levels, almost all architectures need some specific magic
at PGD level (typically initialising PGD entries), so introducing a
generic pgd_alloc() isn't worth it. Instead we introduce two new helpers,
__pgd_alloc() and __pgd_free(), and make use of them in the arch-specific
pgd_alloc() and pgd_free() wherever possible. To accommodate as many arch
as possible, __pgd_alloc() takes a page allocation order.
Because pagetable_alloc() allocates zeroed pages, explicit zeroing in
pgd_alloc() becomes redundant and we can get rid of it. Some trivial
implementations of pgd_free() also become unnecessary once __pgd_alloc()
is used; remove them.
Another small improvement is consistent accounting of PGD pages by using
GFP_PGTABLE_{USER,KERNEL} as appropriate.
Not all PGD allocations can be handled by the generic helpers. In
particular, multiple architectures allocate PGDs from a kmem_cache, and
those PGDs may not be page-sized.
Link: https://lkml.kernel.org/r/20250103184415.2744423-6-kevin.brodsky@arm.com
Signed-off-by: Kevin Brodsky <kevin.brodsky@arm.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
||
|
Qi Zheng
|
db6b435d73 |
mm: pgtable: introduce pagetable_dtor()
The pagetable_p*_dtor() are exactly the same except for the handling of ptlock. If we make ptlock_free() handle the case where ptdesc->ptl is NULL and remove VM_BUG_ON_PAGE() from pmd_ptlock_free(), we can unify pagetable_p*_dtor() into one function. Let's introduce pagetable_dtor() to do this. Later, pagetable_dtor() will be moved to tlb_remove_ptdesc(), so that ptlock and page table pages can be freed together (regardless of whether RCU is used). This prevents the use-after-free problem where the ptlock is freed immediately but the page table pages is freed later via RCU. Link: https://lkml.kernel.org/r/47f44fff9dc68d9d9e9a0d6c036df275f820598a.1736317725.git.zhengqi.arch@bytedance.com Signed-off-by: Qi Zheng <zhengqi.arch@bytedance.com> Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com> Acked-by: Alexander Gordeev <agordeev@linux.ibm.com> [s390] Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Alexandre Ghiti <alexghiti@rivosinc.com> Cc: Andreas Larsson <andreas@gaisler.com> Cc: Aneesh Kumar K.V (Arm) <aneesh.kumar@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Hildenbrand <david@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jann Horn <jannh@google.com> Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com> Cc: Will Deacon <will@kernel.org> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> |
||
|
Linus Torvalds
|
454cb97726 |
Merge tag 'v6.14-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
"API:
- Remove physical address skcipher walking
- Fix boot-up self-test race
Algorithms:
- Optimisations for x86/aes-gcm
- Optimisations for x86/aes-xts
- Remove VMAC
- Remove keywrap
Drivers:
- Remove n2
Others:
- Fixes for padata UAF
- Fix potential rhashtable deadlock by moving schedule_work outside
lock"
* tag 'v6.14-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (75 commits)
rhashtable: Fix rhashtable_try_insert test
dt-bindings: crypto: qcom,inline-crypto-engine: Document the SM8750 ICE
dt-bindings: crypto: qcom,prng: Document SM8750 RNG
dt-bindings: crypto: qcom-qce: Document the SM8750 crypto engine
crypto: asymmetric_keys - Remove unused key_being_used_for[]
padata: avoid UAF for reorder_work
padata: fix UAF in padata_reorder
padata: add pd get/put refcnt helper
crypto: skcipher - call cond_resched() directly
crypto: skcipher - optimize initializing skcipher_walk fields
crypto: skcipher - clean up initialization of skcipher_walk::flags
crypto: skcipher - fold skcipher_walk_skcipher() into skcipher_walk_virt()
crypto: skcipher - remove redundant check for SKCIPHER_WALK_SLOW
crypto: skcipher - remove redundant clamping to page size
crypto: skcipher - remove unnecessary page alignment of bounce buffer
crypto: skcipher - document skcipher_walk_done() and rename some vars
crypto: omap - switch from scatter_walk to plain offset
crypto: powerpc/p10-aes-gcm - simplify handling of linear associated data
crypto: bcm - Drop unused setting of local 'ptr' variable
crypto: hisilicon/qm - support new function communication
...
|
||
|
Linus Torvalds
|
37b33c68b0 |
Merge tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux
Pull CRC updates from Eric Biggers: - Reorganize the architecture-optimized CRC32 and CRC-T10DIF code to be directly accessible via the library API, instead of requiring the crypto API. This is much simpler and more efficient. - Convert some users such as ext4 to use the CRC32 library API instead of the crypto API. More conversions like this will come later. - Add a KUnit test that tests and benchmarks multiple CRC variants. Remove older, less-comprehensive tests that are made redundant by this. - Add an entry to MAINTAINERS for the kernel's CRC library code. I'm volunteering to maintain it. I have additional cleanups and optimizations planned for future cycles. * tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux: (31 commits) MAINTAINERS: add entry for CRC library powerpc/crc: delete obsolete crc-vpmsum_test.c lib/crc32test: delete obsolete crc32test.c lib/crc16_kunit: delete obsolete crc16_kunit.c lib/crc_kunit.c: add KUnit test suite for CRC library functions powerpc/crc-t10dif: expose CRC-T10DIF function through lib arm64/crc-t10dif: expose CRC-T10DIF function through lib arm/crc-t10dif: expose CRC-T10DIF function through lib x86/crc-t10dif: expose CRC-T10DIF function through lib crypto: crct10dif - expose arch-optimized lib function lib/crc-t10dif: add support for arch overrides lib/crc-t10dif: stop wrapping the crypto API scsi: target: iscsi: switch to using the crc32c library f2fs: switch to using the crc32 library jbd2: switch to using the crc32c library ext4: switch to using the crc32c library lib/crc32: make crc32c() go directly to lib bcachefs: Explicitly select CRYPTO from BCACHEFS_FS x86/crc32: expose CRC32 functions through lib x86/crc32: update prototype for crc32_pclmul_le_16() ... |
||
|
Jiaxun Yang
|
df1b8d6e89 |
MIPS: pci-legacy: Override pci_address_to_pio
pci-legacy systems are not using logic_pio to managed PIO
allocations, thus the generic pci_address_to_pio won't work
when PCI_IOBASE is defined.
Override the function to use architecture implementation to
fix the problem.
Cc: stable@vger.kernel.org
Fixes:
|
||
|
Thorsten Blum
|
a3c4afc0e0 |
MIPS: Loongson64: env: Use str_on_off() helper in prom_lefi_init_env()
Remove hard-coded strings by using the str_on_off() helper function. Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Masahiro Yamada
|
04e4ec98e4 |
MIPS: migrate to generic rule for built-in DTBs
Commit
|
||
|
Ism Hong
|
bc7584e009 |
mips: fix shmctl/semctl/msgctl syscall for o32
The commit |
||
|
Mateusz Jończyk
|
42a39e4aa5 |
mips/math-emu: fix emulation of the prefx instruction
Currently, installation of Debian 12.8 for mipsel fails on machines
without an FPU [1]. This is caused by the fact that zstd (which is used
for initramfs compression) executes the prefx instruction, which is not
emulated properly by the kernel.
The prefx (Prefetch Indexed) instruction fetches data from memory into
the cache without any side effects. Though functionally unrelated, it
requires an FPU [2].
Bytecode format of this instruction ends on "001111" binary:
(prefx instruction format) & 0x0000003f = 0x0000000f
The code in fpux_emu() runs like so:
#define MIPSInst(x) x
#define MIPSInst_FMA_FFMT(x) (MIPSInst(x) & 0x00000007)
#define MIPSInst_FUNC(x) (MIPSInst(x) & 0x0000003f)
enum cop1x_func { ..., pfetch_op = 0x0f, ... };
...
switch (MIPSInst_FMA_FFMT(ir)) {
...
case 0x3:
if (MIPSInst_FUNC(ir) != pfetch_op)
return SIGILL;
/* ignore prefx operation */
break;
default:
return SIGILL;
}
That snippet above contains a logic error and the
if (MIPSInst_FUNC(ir) != pfetch_op)
comparison always fires.
When MIPSInst_FUNC(ir) is equal to pfetch_op, ir must end on 001111
binary. In this case, MIPSInst_FMA_FFMT(ir) must be equal to 0x7, which
does not match that case label.
This causes emulation failure for the prefx instruction. Fix it.
This has been broken by
commit
|
||
|
Kexy Biscuit
|
a0088d4a08 |
MIPS: Loongson: Add comments for interface_info
Clarify meanings of members of interface_info, especially for .size, which does not define the ROM size. Suggested-by: Icenowy Zheng <uwu@icenowy.me> Signed-off-by: Kexy Biscuit <kexybiscuit@aosc.io> Acked-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Kexy Biscuit
|
bd2212d658 |
MIPS: Loongson64: remove ROM Size unit in boardinfo
Per Appendix A.7 in Q/LS 0013-2014 (龙芯CPU开发系统固件与内核接口规范 V2.2,
lit. Loongson DevSys Firmware Kernel Interface Specification V2.2),
interface_info.size is size of this interface, not size of the LEFI BIOS
ROM.
In any case, the BIOS ROM Size just cannot be several kilobytes (KB) on
Loongson64 LEFI platforms.
Reported-by: Mingcong Bai <jeffbai@aosc.io>
Suggested-by: Icenowy Zheng <uwu@icenowy.me>
Fixes:
|
||
|
Thorsten Blum
|
02bba947e4 |
MIPS: traps: Use str_enabled_disabled() in parity_protection_init()
Remove hard-coded strings by using the str_enabled_disabled() helper function. Use pr_info() instead of printk(KERN_INFO) to silence multiple checkpatch warnings. Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
WangYuli
|
ddd068d814 |
MIPS: ftrace: Declare ftrace_get_parent_ra_addr() as static
Declare ftrace_get_parent_ra_addr() as static to suppress clang
compiler warning that 'no previous prototype'. This function is
not intended to be called from other parts.
Fix follow error with clang-19:
arch/mips/kernel/ftrace.c:251:15: error: no previous prototype for function 'ftrace_get_parent_ra_addr' [-Werror,-Wmissing-prototypes]
251 | unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
| ^
arch/mips/kernel/ftrace.c:251:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
251 | unsigned long ftrace_get_parent_ra_addr(unsigned long self_ra, unsigned long
| ^
| static
1 error generated.
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
|
||
|
Xi Ruoyao
|
078b831638 |
Revert "MIPS: csrc-r4k: Select HAVE_UNSTABLE_SCHED_CLOCK if SMP && 64BIT"
This reverts commit
|
||
|
liujing
|
3398b1b811 |
MIPS: Fix the wrong format specifier
Make a minor change to eliminate a static checker warning. The type of cpu is unsigned int, so the correct format specifier should be %u instead of %d. Signed-off-by: liujing <liujing@cmss.chinamobile.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Rong Xu
|
0dbec352f8 |
MIPS: Add a blank line after __HEAD
Add a blank line after __HEAD in the text section.
The __HEAD symbol was added in commit
|
||
|
Thomas Bogendoerfer
|
b4fdedd9f0 |
MIPS: kernel: Rename read/write_c0_ecc to read/writec0_errctl
CP0 register 26 is used as ECC register for legacy cores, but newer cores (MIPS32/MIPS64) use it as an ErrCtl register. Since the kernel only uses CP0 26 as ErrCtl register rename the access functions to the more fitting name. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Eric Biggers
|
730f67d8b8 |
crypto: keywrap - remove unused keywrap algorithm
The keywrap (kw) algorithm has no in-tree user. It has never had an in-tree user, and the patch that added it provided no justification for its inclusion. Even use of it via AF_ALG is impossible, as it uses a weird calling convention where part of the ciphertext is returned via the IV buffer, which is not returned to userspace in AF_ALG. It's also unclear whether any new code in the kernel that does key wrapping would actually use this algorithm. It is controversial in the cryptographic community due to having no clearly stated security goal, no security proof, poor performance, and only a 64-bit auth tag. Later work (https://eprint.iacr.org/2006/221) suggested that the goal is deterministic authenticated encryption. But there are now more modern algorithms for this, and this is not the same as key wrapping, for which a regular AEAD such as AES-GCM usually can be (and is) used instead. Therefore, remove this unused code. There were several special cases for this algorithm in the self-tests, due to its weird calling convention. Remove those too. Cc: Stephan Mueller <smueller@chronox.de> Signed-off-by: Eric Biggers <ebiggers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> # m68k Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> |
||
|
Eric Biggers
|
2890601f54 |
crypto: vmac - remove unused VMAC algorithm
Remove the vmac64 template, as it has no known users. It also continues to have longstanding bugs such as alignment violations (see https://lore.kernel.org/r/20241226134847.6690-1-evepolonium@gmail.com/). This code was added in 2009 by commit |
||
|
Théo Lebrun
|
6afcaef38d |
MIPS: mobileye: eyeq5: add bootloader config reserved memory
Add a new reserved-memory node, containing bootloader config with MAC addresses for both ethernet instances of the SoC. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20241230143035.265518-8-srinivas.kandagatla@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
||
|
Anna Emese Nyiri
|
e45469e594 |
sock: Introduce SO_RCVPRIORITY socket option
Add new socket option, SO_RCVPRIORITY, to include SO_PRIORITY in the
ancillary data returned by recvmsg().
This is analogous to the existing support for SO_RCVMARK,
as implemented in commit
|
||
|
Eric Biggers
|
289c270eab |
mips/crc32: expose CRC32 functions through lib
Move the mips CRC32 assembly code into the lib directory and wire it up to the library interface. This allows it to be used without going through the crypto API. It remains usable via the crypto API too via the shash algorithms that use the library interface. Thus all the arch-specific "shash" code becomes unnecessary and is removed. Note: to see the diff from arch/mips/crypto/crc32-mips.c to arch/mips/lib/crc32-mips.c, view this commit with 'git show -M10'. Reviewed-by: Ard Biesheuvel <ardb@kernel.org> Link: https://lore.kernel.org/r/20241202010844.144356-8-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> |
||
|
Linus Torvalds
|
e70140ba0d |
Get rid of 'remove_new' relic from platform driver struct
The continual trickle of small conversion patches is grating on me, and is really not helping. Just get rid of the 'remove_new' member function, which is just an alias for the plain 'remove', and had a comment to that effect: /* * .remove_new() is a relic from a prototype conversion of .remove(). * New drivers are supposed to implement .remove(). Once all drivers are * converted to not use .remove_new any more, it will be dropped. */ This was just a tree-wide 'sed' script that replaced '.remove_new' with '.remove', with some care taken to turn a subsequent tab into two tabs to make things line up. I did do some minimal manual whitespace adjustment for places that used spaces to line things up. Then I just removed the old (sic) .remove_new member function, and this is the end result. No more unnecessary conversion noise. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> |
||
|
Linus Torvalds
|
6a34dfa15d |
Merge tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada: - Add generic support for built-in boot DTB files - Enable TAB cycling for dialog buttons in nconfig - Fix issues in streamline_config.pl - Refactor Kconfig - Add support for Clang's AutoFDO (Automatic Feedback-Directed Optimization) - Add support for Clang's Propeller, a profile-guided optimization. - Change the working directory to the external module directory for M= builds - Support building external modules in a separate output directory - Enable objtool for *.mod.o and additional kernel objects - Use lz4 instead of deprecated lz4c - Work around a performance issue with "git describe" - Refactor modpost * tag 'kbuild-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (85 commits) kbuild: rename .tmp_vmlinux.kallsyms0.syms to .tmp_vmlinux0.syms gitignore: Don't ignore 'tags' directory kbuild: add dependency from vmlinux to resolve_btfids modpost: replace tdb_hash() with hash_str() kbuild: deb-pkg: add python3:native to build dependency genksyms: reduce indentation in export_symbol() modpost: improve error messages in device_id_check() modpost: rename alias symbol for MODULE_DEVICE_TABLE() modpost: rename variables in handle_moddevtable() modpost: move strstarts() to modpost.h modpost: convert do_usb_table() to a generic handler modpost: convert do_of_table() to a generic handler modpost: convert do_pnp_device_entry() to a generic handler modpost: convert do_pnp_card_entries() to a generic handler modpost: call module_alias_printf() from all do_*_entry() functions modpost: pass (struct module *) to do_*_entry() functions modpost: remove DEF_FIELD_ADDR_VAR() macro modpost: deduplicate MODULE_ALIAS() for all drivers modpost: introduce module_alias_printf() helper modpost: remove unnecessary check in do_acpi_entry() ... |
||
|
Linus Torvalds
|
63c81af15c |
Merge tag 'mips_6.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: - fix for loongson64 device tree - add SPI nand to realtek device tree - change clock tree for mobileye * tag 'mips_6.13_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a mips: dts: realtek: Add SPI NAND controller MIPS: mobileye: eyeq6h: add OLB nodes OLB and remove fixed clocks MIPS: mobileye: eyeq5: use OLB as provider for fixed factor clocks |
||
|
Rong Xu
|
52892ed6b0 |
MIPS: Place __kernel_entry at the beginning of text section
Mark __kernel_entry as ".head.text" and place HEAD_TEXT before TEXT_TEXT in the linker script. This ensures that __kernel_entry will be placed at the beginning of text section. Drop mips from scripts/head-object-list.txt. Signed-off-by: Rong Xu <xur@google.com> Reported-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Closes: https://lore.kernel.org/lkml/c6719149-8531-4174-824e-a3caf4bc6d0e@alliedtelesis.co.nz/T/ Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> |
||
|
Linus Torvalds
|
9f16d5e6f2 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"The biggest change here is eliminating the awful idea that KVM had of
essentially guessing which pfns are refcounted pages.
The reason to do so was that KVM needs to map both non-refcounted
pages (for example BARs of VFIO devices) and VM_PFNMAP/VM_MIXMEDMAP
VMAs that contain refcounted pages.
However, the result was security issues in the past, and more recently
the inability to map VM_IO and VM_PFNMAP memory that _is_ backed by
struct page but is not refcounted. In particular this broke virtio-gpu
blob resources (which directly map host graphics buffers into the
guest as "vram" for the virtio-gpu device) with the amdgpu driver,
because amdgpu allocates non-compound higher order pages and the tail
pages could not be mapped into KVM.
This requires adjusting all uses of struct page in the
per-architecture code, to always work on the pfn whenever possible.
The large series that did this, from David Stevens and Sean
Christopherson, also cleaned up substantially the set of functions
that provided arch code with the pfn for a host virtual addresses.
The previous maze of twisty little passages, all different, is
replaced by five functions (__gfn_to_page, __kvm_faultin_pfn, the
non-__ versions of these two, and kvm_prefetch_pages) saving almost
200 lines of code.
ARM:
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This
call was introduced in PSCIv1.3 as a mechanism to request
hibernation, similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested
synchronous external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
LoongArch:
- Add iocsr and mmio bus simulation in kernel.
- Add in-kernel interrupt controller emulation.
- Add support for virtualization extensions to the eiointc irqchip.
PPC:
- Drop lingering and utterly obsolete references to PPC970 KVM, which
was removed 10 years ago.
- Fix incorrect documentation references to non-existing ioctls
RISC-V:
- Accelerate KVM RISC-V when running as a guest
- Perf support to collect KVM guest statistics from host side
s390:
- New selftests: more ucontrol selftests and CPU model sanity checks
- Support for the gen17 CPU model
- List registers supported by KVM_GET/SET_ONE_REG in the
documentation
x86:
- Cleanup KVM's handling of Accessed and Dirty bits to dedup code,
improve documentation, harden against unexpected changes.
Even if the hardware A/D tracking is disabled, it is possible to
use the hardware-defined A/D bits to track if a PFN is Accessed
and/or Dirty, and that removes a lot of special cases.
- Elide TLB flushes when aging secondary PTEs, as has been done in
x86's primary MMU for over 10 years.
- Recover huge pages in-place in the TDP MMU when dirty page logging
is toggled off, instead of zapping them and waiting until the page
is re-accessed to create a huge mapping. This reduces vCPU jitter.
- Batch TLB flushes when dirty page logging is toggled off. This
reduces the time it takes to disable dirty logging by ~3x.
- Remove the shrinker that was (poorly) attempting to reclaim shadow
page tables in low-memory situations.
- Clean up and optimize KVM's handling of writes to
MSR_IA32_APICBASE.
- Advertise CPUIDs for new instructions in Clearwater Forest
- Quirk KVM's misguided behavior of initialized certain feature MSRs
to their maximum supported feature set, which can result in KVM
creating invalid vCPU state. E.g. initializing PERF_CAPABILITIES to
a non-zero value results in the vCPU having invalid state if
userspace hides PDCM from the guest, which in turn can lead to
save/restore failures.
- Fix KVM's handling of non-canonical checks for vCPUs that support
LA57 to better follow the "architecture", in quotes because the
actual behavior is poorly documented. E.g. most MSR writes and
descriptor table loads ignore CR4.LA57 and operate purely on
whether the CPU supports LA57.
- Bypass the register cache when querying CPL from kvm_sched_out(),
as filling the cache from IRQ context is generally unsafe; harden
the cache accessors to try to prevent similar issues from occuring
in the future. The issue that triggered this change was already
fixed in 6.12, but was still kinda latent.
- Advertise AMD_IBPB_RET to userspace, and fix a related bug where
KVM over-advertises SPEC_CTRL when trying to support cross-vendor
VMs.
- Minor cleanups
- Switch hugepage recovery thread to use vhost_task.
These kthreads can consume significant amounts of CPU time on
behalf of a VM or in response to how the VM behaves (for example
how it accesses its memory); therefore KVM tried to place the
thread in the VM's cgroups and charge the CPU time consumed by that
work to the VM's container.
However the kthreads did not process SIGSTOP/SIGCONT, and therefore
cgroups which had KVM instances inside could not complete freezing.
Fix this by replacing the kthread with a PF_USER_WORKER thread, via
the vhost_task abstraction. Another 100+ lines removed, with
generally better behavior too like having these threads properly
parented in the process tree.
- Revert a workaround for an old CPU erratum (Nehalem/Westmere) that
didn't really work; there was really nothing to work around anyway:
the broken patch was meant to fix nested virtualization, but the
PERF_GLOBAL_CTRL MSR is virtualized and therefore unaffected by the
erratum.
- Fix 6.12 regression where CONFIG_KVM will be built as a module even
if asked to be builtin, as long as neither KVM_INTEL nor KVM_AMD is
'y'.
x86 selftests:
- x86 selftests can now use AVX.
Documentation:
- Use rST internal links
- Reorganize the introduction to the API document
Generic:
- Protect vcpu->pid accesses outside of vcpu->mutex with a rwlock
instead of RCU, so that running a vCPU on a different task doesn't
encounter long due to having to wait for all CPUs become quiescent.
In general both reads and writes are rare, but userspace that
supports confidential computing is introducing the use of "helper"
vCPUs that may jump from one host processor to another. Those will
be very happy to trigger a synchronize_rcu(), and the effect on
performance is quite the disaster"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (298 commits)
KVM: x86: Break CONFIG_KVM_X86's direct dependency on KVM_INTEL || KVM_AMD
KVM: x86: add back X86_LOCAL_APIC dependency
Revert "KVM: VMX: Move LOAD_IA32_PERF_GLOBAL_CTRL errata handling out of setup_vmcs_config()"
KVM: x86: switch hugepage recovery thread to vhost_task
KVM: x86: expose MSR_PLATFORM_INFO as a feature MSR
x86: KVM: Advertise CPUIDs for new instructions in Clearwater Forest
Documentation: KVM: fix malformed table
irqchip/loongson-eiointc: Add virt extension support
LoongArch: KVM: Add irqfd support
LoongArch: KVM: Add PCHPIC user mode read and write functions
LoongArch: KVM: Add PCHPIC read and write functions
LoongArch: KVM: Add PCHPIC device support
LoongArch: KVM: Add EIOINTC user mode read and write functions
LoongArch: KVM: Add EIOINTC read and write functions
LoongArch: KVM: Add EIOINTC device support
LoongArch: KVM: Add IPI user mode read and write function
LoongArch: KVM: Add IPI read and write function
LoongArch: KVM: Add IPI device support
LoongArch: KVM: Add iocsr and mmio bus simulation in kernel
KVM: arm64: Pass on SVE mapping failures
...
|
||
|
Linus Torvalds
|
5c00ff742b |
Merge tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- The series "zram: optimal post-processing target selection" from
Sergey Senozhatsky improves zram's post-processing selection
algorithm. This leads to improved memory savings.
- Wei Yang has gone to town on the mapletree code, contributing several
series which clean up the implementation:
- "refine mas_mab_cp()"
- "Reduce the space to be cleared for maple_big_node"
- "maple_tree: simplify mas_push_node()"
- "Following cleanup after introduce mas_wr_store_type()"
- "refine storing null"
- The series "selftests/mm: hugetlb_fault_after_madv improvements" from
David Hildenbrand fixes this selftest for s390.
- The series "introduce pte_offset_map_{ro|rw}_nolock()" from Qi Zheng
implements some rationaizations and cleanups in the page mapping
code.
- The series "mm: optimize shadow entries removal" from Shakeel Butt
optimizes the file truncation code by speeding up the handling of
shadow entries.
- The series "Remove PageKsm()" from Matthew Wilcox completes the
migration of this flag over to being a folio-based flag.
- The series "Unify hugetlb into arch_get_unmapped_area functions" from
Oscar Salvador implements a bunch of consolidations and cleanups in
the hugetlb code.
- The series "Do not shatter hugezeropage on wp-fault" from Dev Jain
takes away the wp-fault time practice of turning a huge zero page
into small pages. Instead we replace the whole thing with a THP. More
consistent cleaner and potentiall saves a large number of pagefaults.
- The series "percpu: Add a test case and fix for clang" from Andy
Shevchenko enhances and fixes the kernel's built in percpu test code.
- The series "mm/mremap: Remove extra vma tree walk" from Liam Howlett
optimizes mremap() by avoiding doing things which we didn't need to
do.
- The series "Improve the tmpfs large folio read performance" from
Baolin Wang teaches tmpfs to copy data into userspace at the folio
size rather than as individual pages. A 20% speedup was observed.
- The series "mm/damon/vaddr: Fix issue in
damon_va_evenly_split_region()" fro Zheng Yejian fixes DAMON
splitting.
- The series "memcg-v1: fully deprecate charge moving" from Shakeel
Butt removes the long-deprecated memcgv2 charge moving feature.
- The series "fix error handling in mmap_region() and refactor" from
Lorenzo Stoakes cleanup up some of the mmap() error handling and
addresses some potential performance issues.
- The series "x86/module: use large ROX pages for text allocations"
from Mike Rapoport teaches x86 to use large pages for
read-only-execute module text.
- The series "page allocation tag compression" from Suren Baghdasaryan
is followon maintenance work for the new page allocation profiling
feature.
- The series "page->index removals in mm" from Matthew Wilcox remove
most references to page->index in mm/. A slow march towards shrinking
struct page.
- The series "damon/{self,kunit}tests: minor fixups for DAMON debugfs
interface tests" from Andrew Paniakin performs maintenance work for
DAMON's self testing code.
- The series "mm: zswap swap-out of large folios" from Kanchana Sridhar
improves zswap's batching of compression and decompression. It is a
step along the way towards using Intel IAA hardware acceleration for
this zswap operation.
- The series "kasan: migrate the last module test to kunit" from
Sabyrzhan Tasbolatov completes the migration of the KASAN built-in
tests over to the KUnit framework.
- The series "implement lightweight guard pages" from Lorenzo Stoakes
permits userapace to place fault-generating guard pages within a
single VMA, rather than requiring that multiple VMAs be created for
this. Improved efficiencies for userspace memory allocators are
expected.
- The series "memcg: tracepoint for flushing stats" from JP Kobryn uses
tracepoints to provide increased visibility into memcg stats flushing
activity.
- The series "zram: IDLE flag handling fixes" from Sergey Senozhatsky
fixes a zram buglet which potentially affected performance.
- The series "mm: add more kernel parameters to control mTHP" from
Maíra Canal enhances our ability to control/configuremultisize THP
from the kernel boot command line.
- The series "kasan: few improvements on kunit tests" from Sabyrzhan
Tasbolatov has a couple of fixups for the KASAN KUnit tests.
- The series "mm/list_lru: Split list_lru lock into per-cgroup scope"
from Kairui Song optimizes list_lru memory utilization when lockdep
is enabled.
* tag 'mm-stable-2024-11-18-19-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (215 commits)
cma: enforce non-zero pageblock_order during cma_init_reserved_mem()
mm/kfence: add a new kunit test test_use_after_free_read_nofault()
zram: fix NULL pointer in comp_algorithm_show()
memcg/hugetlb: add hugeTLB counters to memcg
vmstat: call fold_vm_zone_numa_events() before show per zone NUMA event
mm: mmap_lock: check trace_mmap_lock_$type_enabled() instead of regcount
zram: ZRAM_DEF_COMP should depend on ZRAM
MAINTAINERS/MEMORY MANAGEMENT: add document files for mm
Docs/mm/damon: recommend academic papers to read and/or cite
mm: define general function pXd_init()
kmemleak: iommu/iova: fix transient kmemleak false positive
mm/list_lru: simplify the list_lru walk callback function
mm/list_lru: split the lock to per-cgroup scope
mm/list_lru: simplify reparenting and initial allocation
mm/list_lru: code clean up for reparenting
mm/list_lru: don't export list_lru_add
mm/list_lru: don't pass unnecessary key parameters
kasan: add kunit tests for kmalloc_track_caller, kmalloc_node_track_caller
kasan: change kasan_atomics kunit test as KUNIT_CASE_SLOW
kasan: use EXPORT_SYMBOL_IF_KUNIT to export symbols
...
|
||
|
Xi Ruoyao
|
4fbd66d825 |
MIPS: Loongson64: DTS: Really fix PCIe port nodes for ls7a
Fix the dtc warnings:
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/ls7a-pch.dtsi:68.16-416.5: Warning (interrupt_provider): /bus@10000000/pci@1a000000: '#interrupt-cells' found, but node is not an interrupt provider
arch/mips/boot/dts/loongson/loongson64g_4core_ls7a.dtb: Warning (interrupt_map): Failed prerequisite 'interrupt_provider'
And a runtime warning introduced in commit
|
||
|
Linus Torvalds
|
fcc79e1714 |
Merge tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"The most significant set of changes is the per netns RTNL. The new
behavior is disabled by default, regression risk should be contained.
Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its
default value from PTP_1588_CLOCK_KVM, as the first is intended to be
a more reliable replacement for the latter.
Core:
- Started a very large, in-progress, effort to make the RTNL lock
scope per network-namespace, thus reducing the lock contention
significantly in the containerized use-case, comprising:
- RCU-ified some relevant slices of the FIB control path
- introduce basic per netns locking helpers
- namespacified the IPv4 address hash table
- remove rtnl_register{,_module}() in favour of
rtnl_register_many()
- refactor rtnl_{new,del,set}link() moving as much validation as
possible out of RTNL lock
- convert all phonet doit() and dumpit() handlers to RCU
- convert IPv4 addresses manipulation to per-netns RTNL
- convert virtual interface creation to per-netns RTNL
the per-netns lock infrastructure is guarded by the
CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim.
- Introduce NAPI suspension, to efficiently switching between busy
polling (NAPI processing suspended) and normal processing.
- Migrate the IPv4 routing input, output and control path from direct
ToS usage to DSCP macros. This is a work in progress to make ECN
handling consistent and reliable.
- Add drop reasons support to the IPv4 rotue input path, allowing
better introspection in case of packets drop.
- Make FIB seqnum lockless, dropping RTNL protection for read access.
- Make inet{,v6} addresses hashing less predicable.
- Allow providing timestamp OPT_ID via cmsg, to correlate TX packets
and timestamps
Things we sprinkled into general kernel code:
- Add small file operations for debugfs, to reduce the struct ops
size.
- Refactoring and optimization for the implementation of page_frag
API, This is a preparatory work to consolidate the page_frag
implementation.
Netfilter:
- Optimize set element transactions to reduce memory consumption
- Extended netlink error reporting for attribute parser failure.
- Make legacy xtables configs user selectable, giving users the
option to configure iptables without enabling any other config.
- Address a lot of false-positive RCU issues, pointed by recent CI
improvements.
BPF:
- Put xsk sockets on a struct diet and add various cleanups. Overall,
this helps to bump performance by 12% for some workloads.
- Extend BPF selftests to increase coverage of XDP features in
combination with BPF cpumap.
- Optimize and homogenize bpf_csum_diff helper for all archs and also
add a batch of new BPF selftests for it.
- Extend netkit with an option to delegate skb->{mark,priority}
scrubbing to its BPF program.
- Make the bpf_get_netns_cookie() helper available also to tc(x) BPF
programs.
Protocols:
- Introduces 4-tuple hash for connected udp sockets, speeding-up
significantly connected sockets lookup.
- Add a fastpath for some TCP timers that usually expires after
close, the socket lock contention.
- Add inbound and outbound xfrm state caches to speed up state
lookups.
- Avoid sending MPTCP advertisements on stale subflows, reducing
risks on loosing them.
- Make neighbours table flushing more scalable, maintaining per
device neigh lists.
Driver API:
- Introduce a unified interface to configure transmission H/W
shaping, and expose it to user-space via generic-netlink.
- Add support for per-NAPI config via netlink. This makes napi
configuration persistent across queues removal and re-creation.
Requires driver updates, currently supported drivers are:
nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice.
- Add ethtool support for writing SFP / PHY firmware blocks.
- Track RSS context allocation from ethtool core.
- Implement support for mirroring to DSA CPU port, via TC mirror
offload.
- Consolidate FDB updates notification, to avoid duplicates on
device-specific entries.
- Expose DPLL clock quality level to the user-space.
- Support master-slave PHY config via device tree.
Tests and tooling:
- forwarding: introduce deferred commands, to simplify the cleanup
phase
Drivers:
- Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic,
Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the
IRQs and queues to NAPI IDs, allowing busy polling and better
introspection.
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- mlx5:
- a large refactor to implement support for cross E-Switch
scheduling
- refactor H/W conter management to let it scale better
- H/W GRO cleanups
- Intel (100G, ice)::
- add support for ethtool reset
- implement support for per TX queue H/W shaping
- AMD/Solarflare:
- implement per device queue stats support
- Broadcom (bnxt):
- improve wildcard l4proto on IPv4/IPv6 ntuple rules
- Marvell Octeon:
- Add representor support for each Resource Virtualization Unit
(RVU) device.
- Hisilicon:
- add support for the BMC Gigabit Ethernet
- IBM (EMAC):
- driver cleanup and modernization
- Cisco (VIC):
- raise the queues number limit to 256
- Ethernet virtual:
- Google vNIC:
- implement page pool support
- macsec:
- inherit lower device's features and TSO limits when
offloading
- virtio_net:
- enable premapped mode by default
- support for XDP socket(AF_XDP) zerocopy TX
- wireguard:
- set the TSO max size to be GSO_MAX_SIZE, to aggregate larger
packets.
- Ethernet NICs embedded and virtual:
- Broadcom ASP:
- enable software timestamping
- Freescale:
- add enetc4 PF driver
- MediaTek: Airoha SoC:
- implement BQL support
- RealTek r8169:
- enable TSO by default on r8168/r8125
- implement extended ethtool stats
- Renesas AVB:
- enable TX checksum offload
- Synopsys (stmmac):
- support header splitting for vlan tagged packets
- move common code for DWMAC4 and DWXGMAC into a separate FPE
module.
- add dwmac driver support for T-HEAD TH1520 SoC
- Synopsys (xpcs):
- driver refactor and cleanup
- TI:
- icssg_prueth: add VLAN offload support
- Xilinx emaclite:
- add clock support
- Ethernet switches:
- Microchip:
- implement support for the lan969x Ethernet switch family
- add LAN9646 switch support to KSZ DSA driver
- Ethernet PHYs:
- Marvel: 88q2x: enable auto negotiation
- Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2
- PTP:
- Add support for the Amazon virtual clock device
- Add PtP driver for s390 clocks
- WiFi:
- mac80211
- EHT 1024 aggregation size for transmissions
- new operation to indicate that a new interface is to be added
- support radio separation of multi-band devices
- move wireless extension spy implementation to libiw
- Broadcom:
- brcmfmac: optional LPO clock support
- Microchip:
- add support for Atmel WILC3000
- Qualcomm (ath12k):
- firmware coredump collection support
- add debugfs support for a multitude of statistics
- Qualcomm (ath5k):
- Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
- Realtek:
- rtw88: 8821au and 8812au USB adapters support
- rtw89: add thermal protection
- rtw89: fine tune BT-coexsitence to improve user experience
- rtw89: firmware secure boot for WiFi 6 chip
- Bluetooth
- add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and
0x13d3:0x3623
- add Realtek RTL8852BE support for id Foxconn 0xe123
- add MediaTek MT7920 support for wireless module ids
- btintel_pcie: add handshake between driver and firmware
- btintel_pcie: add recovery mechanism
- btnxpuart: add GPIO support to power save feature"
* tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits)
mm: page_frag: fix a compile error when kernel is not compiled
Documentation: tipc: fix formatting issue in tipc.rst
selftests: nic_performance: Add selftest for performance of NIC driver
selftests: nic_link_layer: Add selftest case for speed and duplex states
selftests: nic_link_layer: Add link layer selftest for NIC driver
bnxt_en: Add FW trace coredump segments to the coredump
bnxt_en: Add a new ethtool -W dump flag
bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr()
bnxt_en: Add functions to copy host context memory
bnxt_en: Do not free FW log context memory
bnxt_en: Manage the FW trace context memory
bnxt_en: Allocate backing store memory for FW trace logs
bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem()
bnxt_en: Refactor bnxt_free_ctx_mem()
bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type
bnxt_en: Update firmware interface spec to 1.10.3.85
selftests/bpf: Add some tests with sockmap SK_PASS
bpf: fix recursive lock when verdict program return SK_PASS
wireguard: device: support big tcp GSO
wireguard: selftests: load nf_conntrack if not present
...
|
||
|
Linus Torvalds
|
79caa6c88a |
Merge tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic updates from Arnd Bergmann:
"These are a number of unrelated cleanups, generally simplifying the
architecture specific header files:
- A series from Al Viro simplifies asm/vga.h, after it turns out that
most of it can be generalized.
- A series from Julian Vetter adds a common version of
memcpy_{to,from}io() and memset_io() and changes most architectures
to use that instead of their own implementation
- A series from Niklas Schnelle concludes his work to make PC style
inb()/outb() optional
- Nicolas Pitre contributes improvements for the generic do_div()
helper
- Christoph Hellwig adds a generic version of page_to_phys() and
phys_to_page(), replacing the slightly different architecture
specific definitions.
- Uwe Kleine-Koenig has a minor cleanup for ioctl definitions"
* tag 'asm-generic-3.13' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
empty include/asm-generic/vga.h
sparc: get rid of asm/vga.h
asm/vga.h: don't bother with scr_mem{cpy,move}v() unless we need to
vt_buffer.h: get rid of dead code in default scr_...() instances
tty: serial: export serial_8250_warn_need_ioport
lib/iomem_copy: fix kerneldoc format style
hexagon: simplify asm/io.h for !HAS_IOPORT
loongarch: Use new fallback IO memcpy/memset
csky: Use new fallback IO memcpy/memset
arm64: Use new fallback IO memcpy/memset
New implementation for IO memcpy and IO memset
watchdog: Add HAS_IOPORT dependency for SBC8360 and SBC7240
__arch_xprod64(): make __always_inline when optimizing for performance
ARM: div64: improve __arch_xprod_64()
asm-generic/div64: optimize/simplify __div64_const32()
lib/math/test_div64: add some edge cases relevant to __div64_const32()
asm-generic: add an optional pfn_valid check to page_to_phys
asm-generic: provide generic page_to_phys and phys_to_page implementations
asm-generic/io.h: Remove I/O port accessors for HAS_IOPORT=n
tty: serial: handle HAS_IOPORT dependencies
...
|
||
|
Chris Packham
|
5a38a5d40f |
mips: dts: realtek: Add SPI NAND controller
Add the SPI-NAND controller on the RTL9300 family of devices. This supports serial/dual/quad data width and DMA for read/program operations. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Linus Torvalds
|
e6de688e93 |
Merge tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"Bindings:
- Enable dtc "interrupt_provider" warnings for binding examples. Fix
the warnings in fsl,mu-msi and ti,sci-inta due to this.
- Convert zii,rave-sp-wdt, zii,rave-sp-pwrbutton, and
altr,fpga-passive-serial to DT schema format
- Add some documentation on the different forms of YAML text blocks
which are a constant source of review comments
- Fix some schema errors in constraints for arrays
- Add compatibles for qcom,sar2130p-pdc and onnn,adt7462
DT core:
- Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
- Add some warnings on deprecated address handling
- Rework early_init_dt_scan() so the arch can pass in the phys
address of the DTB as __pa() is not always valid to use. This fixes
a warning for arm64 with kexec.
- Add and use some new DT graph iterators for iterating over ports
and endpoints
- Rework reserved-memory handling to be sized dynamically for fixed
regions
- Optimize of_modalias() to avoid a strlen() call
- Constify struct device_node and property pointers where ever
possible"
* tag 'devicetree-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (36 commits)
of: Allow overlay kunit tests to run CONFIG_OF_OVERLAY=n
dt-bindings: interrupt-controller: qcom,pdc: Add SAR2130P compatible
of/address: Rework bus matching to avoid warnings
of: WARN on deprecated #address-cells/#size-cells handling
of/fdt: Don't use default address cell sizes for address translation
dt-bindings: Enable dtc "interrupt_provider" warnings
of/fdt: add dt_phys arg to early_init_dt_scan and early_init_dt_verify
dt-bindings: cache: qcom,llcc: Fix X1E80100 reg entries
dt-bindings: watchdog: convert zii,rave-sp-wdt.txt to yaml format
dt-bindings: input: convert zii,rave-sp-pwrbutton.txt to yaml
media: xilinx-tpg: use new of_graph functions
fbdev: omapfb: use new of_graph functions
gpu: drm: omapdrm: use new of_graph functions
ASoC: audio-graph-card2: use new of_graph functions
ASoC: audio-graph-card: use new of_graph functions
ASoC: test-component: use new of_graph functions
of: property: use new of_graph functions
of: property: add of_graph_get_next_port_endpoint()
of: property: add of_graph_get_next_port()
of: module: remove strlen() call in of_modalias()
...
|
||
|
Linus Torvalds
|
bf9aa14fc5 |
Merge tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"A rather large update for timekeeping and timers:
- The final step to get rid of auto-rearming posix-timers
posix-timers are currently auto-rearmed by the kernel when the
signal of the timer is ignored so that the timer signal can be
delivered once the corresponding signal is unignored.
This requires to throttle the timer to prevent a DoS by small
intervals and keeps the system pointlessly out of low power states
for no value. This is a long standing non-trivial problem due to
the lock order of posix-timer lock and the sighand lock along with
life time issues as the timer and the sigqueue have different life
time rules.
Cure this by:
- Embedding the sigqueue into the timer struct to have the same
life time rules. Aside of that this also avoids the lookup of
the timer in the signal delivery and rearm path as it's just a
always valid container_of() now.
- Queuing ignored timer signals onto a seperate ignored list.
- Moving queued timer signals onto the ignored list when the
signal is switched to SIG_IGN before it could be delivered.
- Walking the ignored list when SIG_IGN is lifted and requeue the
signals to the actual signal lists. This allows the signal
delivery code to rearm the timer.
This also required to consolidate the signal delivery rules so they
are consistent across all situations. With that all self test
scenarios finally succeed.
- Core infrastructure for VFS multigrain timestamping
This is required to allow the kernel to use coarse grained time
stamps by default and switch to fine grained time stamps when inode
attributes are actively observed via getattr().
These changes have been provided to the VFS tree as well, so that
the VFS specific infrastructure could be built on top.
- Cleanup and consolidation of the sleep() infrastructure
- Move all sleep and timeout functions into one file
- Rework udelay() and ndelay() into proper documented inline
functions and replace the hardcoded magic numbers by proper
defines.
- Rework the fsleep() implementation to take the reality of the
timer wheel granularity on different HZ values into account.
Right now the boundaries are hard coded time ranges which fail
to provide the requested accuracy on different HZ settings.
- Update documentation for all sleep/timeout related functions
and fix up stale documentation links all over the place
- Fixup a few usage sites
- Rework of timekeeping and adjtimex(2) to prepare for multiple PTP
clocks
A system can have multiple PTP clocks which are participating in
seperate and independent PTP clock domains. So far the kernel only
considers the PTP clock which is based on CLOCK TAI relevant as
that's the clock which drives the timekeeping adjustments via the
various user space daemons through adjtimex(2).
The non TAI based clock domains are accessible via the file
descriptor based posix clocks, but their usability is very limited.
They can't be accessed fast as they always go all the way out to
the hardware and they cannot be utilized in the kernel itself.
As Time Sensitive Networking (TSN) gains traction it is required to
provide fast user and kernel space access to these clocks.
The approach taken is to utilize the timekeeping and adjtimex(2)
infrastructure to provide this access in a similar way how the
kernel provides access to clock MONOTONIC, REALTIME etc.
Instead of creating a duplicated infrastructure this rework
converts timekeeping and adjtimex(2) into generic functionality
which operates on pointers to data structures instead of using
static variables.
This allows to provide time accessors and adjtimex(2) functionality
for the independent PTP clocks in a subsequent step.
- Consolidate hrtimer initialization
hrtimers are set up by initializing the data structure and then
seperately setting the callback function for historical reasons.
That's an extra unnecessary step and makes Rust support less
straight forward than it should be.
Provide a new set of hrtimer_setup*() functions and convert the
core code and a few usage sites of the less frequently used
interfaces over.
The bulk of the htimer_init() to hrtimer_setup() conversion is
already prepared and scheduled for the next merge window.
- Drivers:
- Ensure that the global timekeeping clocksource is utilizing the
cluster 0 timer on MIPS multi-cluster systems.
Otherwise CPUs on different clusters use their cluster specific
clocksource which is not guaranteed to be synchronized with
other clusters.
- Mostly boring cleanups, fixes, improvements and code movement"
* tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits)
posix-timers: Fix spurious warning on double enqueue versus do_exit()
clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties
clocksource/drivers/gpx: Remove redundant casts
clocksource/drivers/timer-ti-dm: Fix child node refcount handling
dt-bindings: timer: actions,owl-timer: convert to YAML
clocksource/drivers/ralink: Add Ralink System Tick Counter driver
clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource
clocksource/drivers/timer-ti-dm: Don't fail probe if int not found
clocksource/drivers:sp804: Make user selectable
clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions
hrtimers: Delete hrtimer_init_on_stack()
alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack()
io_uring: Switch to use hrtimer_setup_on_stack()
sched/idle: Switch to use hrtimer_setup_on_stack()
hrtimers: Delete hrtimer_init_sleeper_on_stack()
wait: Switch to use hrtimer_setup_sleeper_on_stack()
timers: Switch to use hrtimer_setup_sleeper_on_stack()
net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack()
futex: Switch to use hrtimer_setup_sleeper_on_stack()
fs/aio: Switch to use hrtimer_setup_sleeper_on_stack()
...
|
||
|
Linus Torvalds
|
0352387523 |
Merge tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vdso data page handling updates from Thomas Gleixner:
"First steps of consolidating the VDSO data page handling.
The VDSO data page handling is architecture specific for historical
reasons, but there is no real technical reason to do so.
Aside of that VDSO data has become a dump ground for various
mechanisms and fail to provide a clear separation of the
functionalities.
Clean this up by:
- consolidating the VDSO page data by getting rid of architecture
specific warts especially in x86 and PowerPC.
- removing the last includes of header files which are pulling in
other headers outside of the VDSO namespace.
- seperating timekeeping and other VDSO data accordingly.
Further consolidation of the VDSO page handling is done in subsequent
changes scheduled for the next merge window.
This also lays the ground for expanding the VDSO time getters for
independent PTP clocks in a generic way without making every
architecture add support seperately"
* tag 'timers-vdso-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
x86/vdso: Add missing brackets in switch case
vdso: Rename struct arch_vdso_data to arch_vdso_time_data
powerpc: Split systemcfg struct definitions out from vdso
powerpc: Split systemcfg data out of vdso data page
powerpc: Add kconfig option for the systemcfg page
powerpc/pseries/lparcfg: Use num_possible_cpus() for potential processors
powerpc/pseries/lparcfg: Fix printing of system_active_processors
powerpc/procfs: Propagate error of remap_pfn_range()
powerpc/vdso: Remove offset comment from 32bit vdso_arch_data
x86/vdso: Split virtual clock pages into dedicated mapping
x86/vdso: Delete vvar.h
x86/vdso: Access vdso data without vvar.h
x86/vdso: Move the rng offset to vsyscall.h
x86/vdso: Access rng vdso data without vvar.h
x86/vdso: Access timens vdso data without vvar.h
x86/vdso: Allocate vvar page from C code
x86/vdso: Access rng data from kernel without vvar
x86/vdso: Place vdso_data at beginning of vvar page
x86/vdso: Use __arch_get_vdso_data() to access vdso data
x86/mm/mmap: Remove arch_vma_name()
...
|
||
|
Linus Torvalds
|
ae4336e20b |
Merge tag 'mips_6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: "Just cleanups and fixes" * tag 'mips_6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: dts: realtek: Add I2C controllers mips: dts: realtek: Add syscon-reboot node MIPS: loongson3_defconfig: Enable blk_dev_nvme by default MIPS: loongson3_defconfig: Update configs dependencies MAINTAINERS: Remove linux-mips.org references MAINTAINERS: Retire Ralf Baechle TC: Fix the wrong format specifier MIPS: kernel: proc: Use str_yes_no() helper function MIPS: mobileye: eyeq6h-epm6: Use eyeq6h in the board device tree mips: bmips: bcm6358/6368: define required brcm,bmips-cbr-reg MIPS: Allow using more than 32-bit addresses for reset vectors when possible mips: asm: fix warning when disabling MIPS_FP_SUPPORT mips: sgi-ip22: Replace "s[n]?printf" with sysfs_emit in sysfs callbacks |
||
|
Linus Torvalds
|
82339c4911 |
Merge tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull xattr updates from Al Viro: "Sanitize xattr and io_uring interactions with it, add *xattrat() syscalls, sanitize struct filename handling in there" * tag 'pull-xattr' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: xattr: remove redundant check on variable err fs/xattr: add *at family syscalls new helpers: file_removexattr(), filename_removexattr() new helpers: file_listxattr(), filename_listxattr() replace do_getxattr() with saner helpers. replace do_setxattr() with saner helpers. new helper: import_xattr_name() fs: rename struct xattr_ctx to kernel_xattr_ctx xattr: switch to CLASS(fd) io_[gs]etxattr_prep(): just use getname() io_uring: IORING_OP_F[GS]ETXATTR is fine with REQ_F_FIXED_FILE getname_maybe_null() - the third variant of pathname copy-in teach filename_lookup() to treat NULL filename as "" |
||
|
Linus Torvalds
|
4a5df37964 |
Merge tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull hotfixes from Andrew Morton: "10 hotfixes, 7 of which are cc:stable. All singletons, please see the changelogs for details" * tag 'mm-hotfixes-stable-2024-11-16-15-33' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: mm: revert "mm: shmem: fix data-race in shmem_getattr()" ocfs2: uncache inode which has failed entering the group mm: fix NULL pointer dereference in alloc_pages_bulk_noprof mm, doc: update read_ahead_kb for MADV_HUGEPAGE fs/proc/task_mmu: prevent integer overflow in pagemap_scan_get_args() sched/task_stack: fix object_is_on_stack() for KASAN tagged pointers crash, powerpc: default to CRASH_DUMP=n on PPC_BOOK3S_32 mm/mremap: fix address wraparound in move_page_tables() tools/mm: fix compile error mm, swap: fix allocation and scanning race with swapoff |
||
|
Linus Torvalds
|
842c7e5834 |
Merge tag 'v6.12-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu: "Fix a regression in the MIPS CRC32C code" * tag 'v6.12-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: mips/crc32 - fix the CRC32C implementation |
||
|
Théo Lebrun
|
1be858f7fa |
MIPS: mobileye: eyeq6h: add OLB nodes OLB and remove fixed clocks
Change the declaration of clocks: remove all fixed clocks and declare system-controllers (OLB) as clock providers. Remove eyeq6h-fixed-clocks.dtsi and move the crystal clock to the main eyeq6h.dtsi file. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |
||
|
Théo Lebrun
|
d3c3c283af |
MIPS: mobileye: eyeq5: use OLB as provider for fixed factor clocks
Change the structure of the clock tree: rather than individual devicetree nodes registering each fixed factor clock derived from OLB PLLs, have the OLB node provide the necessary clocks. Remove eyeq5-clocks.dtsi and move the three remaining "fixed-clock"s to the main eyeq5.dtsi file. Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> |