Implement "mdd-auto-reset-vf" priv-flag to handle Tx and Rx MDD events for VFs.
This flag is also used in other network adapters like ICE.
Usage:
- "on" - The problematic VF will be automatically reset
if a malformed descriptor is detected.
- "off" - The problematic VF will be disabled.
In cases where a VF sends malformed packets classified as malicious, it can
cause the Tx queue to freeze, rendering it unusable for several minutes. When
an MDD event occurs, this new implementation allows for a graceful VF reset to
quickly restore operational state.
Currently, VF queues are disabled if an MDD event occurs. This patch adds the
ability to reset the VF if a Tx or Rx MDD event occurs. It also includes MDD
event logging throttling to avoid dmesg pollution and unifies the format of
Tx and Rx MDD messages.
Note: Standard message rate limiting functions like dev_info_ratelimited()
do not meet our requirements. Custom rate limiting is implemented,
please see the code for details.
Co-developed-by: Jan Sokolowski <jan.sokolowski@intel.com>
Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com>
Co-developed-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Padraig J Connolly <padraig.j.connolly@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20250106221929.956999-13-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add PCIe hardware statistics support to the fbnic driver. These stats
provide insight into PCIe transaction performance and error conditions.
Which includes, read/write and completion TLP counts and DWORD counts and
debug counters for tag, completion credit and NP credit exhaustion
The stats are exposed via debugfs and can be used to monitor PCIe
performance and debug PCIe issues.
Signed-off-by: Sanman Pradhan <sanman.p211993@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20241115015344.757567-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Adds documentation for creating and configuring rvu port representors
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for userspace to enable/disable the debug ports(ADB,MIPC).
- ADB port: /dev/wwan0adb0
- MIPC port: /dev/wwan0mipc0
Application can use ADB (Android Debug Bridge) port to implement
functions (shell, pull, push ...) by ADB protocol commands.
E.g., ADB commands:
- A_OPEN: OPEN(local-id, 0, "destination")
- A_WRTE: WRITE(local-id, remote-id, "data")
- A_OKEY: READY(local-id, remote-id, "")
- A_CLSE: CLOSE(local-id, remote-id, "")
Link: https://android.googlesource.com/platform/packages/modules/adb/+/refs/heads/main/README.md
Application can use MIPC (Modem Information Process Center) port
to debug antenna tuner or noise profiling through this MTK modem
diagnostic interface.
By default, debug ports are not exposed, so using the command
to enable or disable debug ports.
Enable debug ports:
- enable: 'echo 1 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports
Disable debug ports:
- disable: 'echo 0 > /sys/bus/pci/devices/${bdf}/t7xx_debug_ports
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ENA Express metrics, called `ena_srd` are exposed to
customers via `ethtool`.
The metrics allow customers to check the configuration
(mode), tx/rx counters as well as resource utilization.
The documentation is also updated to provide a general
explanation about ENA Express as well as links for further
information about metrics and configurations.
Signed-off-by: Igor Chauskin <igorch@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://patch.msgid.link/20240909084704.13856-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Saeed Mahameed says:
====================
mlx5-updates-2024-08-29
HW-Managed Flow Steering in mlx5 driver
Yevgeny Kliteynik says:
=======================
1. Overview
-----------
ConnectX devices support packet matching, modification, and redirection.
This functionality is referred as Flow Steering.
To configure a steering rule, the rule is written to the device-owned
memory. This memory is accessed and cached by the device when processing
a packet.
The first implementation of Flow Steering was done in FW, and it is
referred in the mlx5 driver as Device-Managed Flow Steering (DMFS).
Later we introduced SW-managed Flow Steering (SWS or SMFS), where the
driver is writing directly to the device's configuration memory (ICM)
through RC QP using RDMA operations (RDMA-read and RDAM-write), thus
achieving higher rates of rule insertion/deletion.
Now we introduce a new flow steering implementation: HW-Managed Flow
Steering (HWS or HMFS).
In this new approach, the driver is configuring steering rules directly
to the HW using the WQs with a special new type of WQE. This way we can
reach higher rule insertion/deletion rate with much lower CPU utilization
compared to SWS.
The key benefits of HWS as opposed to SWS:
+ HW manages the steering decision tree
- HW calculates CRC for each entry
- HW handles tree hash collisions
- HW & FW manage objects refcount
+ HW keeps cache coherency:
- HW provides tree access locking and synchronization
- HW provides notification on completion
+ Insertion rate isn’t affected by background traffic
- Dedicated HW components that handle insertion
2. Performance
--------------
Measuring Connection Tracking with simple IPv4 flows w/o NAT, we
are able to get ~5 times more flows offloaded per second using HWS.
3. Configuration
----------------
The enablement of HWS mode in eswitch manager is done using the same
devlink param that is already used for switching between FW-managed
steering and SW-managed steering modes:
# devlink dev param set pci/<PCI_ID> name flow_steering_mode cmod runtime value hmfs
4. Upstream Submission
----------------------
HWS support consists of 3 main components:
+ Steering:
- The lower layer that exposes HWS API to upper layers and implements
all the management of flow steering building blocks
+ FS-Core
- Implementation of fs_hws layer to enable fs_core to use HWS instead
of FW or SW steering
- Create HW steering action pools to utilize the ability of HWS to
share steering actions among different rules
- Add support for configuring HWS mode through devlink command,
similar to configuring SWS mode
+ Connection Tracking
- Implementation of CT support for HW steering
- Hooks up the CT ops for the new steering mode and uses the HWS API
to implement connection tracking.
Because of the large number of patches, we need to perform the submission
in several separate patch series. This series is the first submission that
lays the ground work for the next submissions, where an actual user of HWS
will be added.
5. Patches in this series
-------------------------
This patch series contains implementation of the first bullet from above.
=======================
* tag 'mlx5-updates-2024-09-02' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
net/mlx5: HWS, added API and enabled HWS support
net/mlx5: HWS, added send engine and context handling
net/mlx5: HWS, added debug dump and internal headers
net/mlx5: HWS, added backward-compatible API handling
net/mlx5: HWS, added memory management handling
net/mlx5: HWS, added vport handling
net/mlx5: HWS, added modify header pattern and args handling
net/mlx5: HWS, added FW commands handling
net/mlx5: HWS, added matchers functionality
net/mlx5: HWS, added definers handling
net/mlx5: HWS, added rules handling
net/mlx5: HWS, added tables handling
net/mlx5: HWS, added actions handling
net/mlx5: Added missing definitions in preparation for HW Steering
net/mlx5: Added missing mlx5_ifc definition for HW Steering
====================
Link: https://patch.msgid.link/20240909181250.41596-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This adds support to show firmware version information for both stored and
running firmware versions. The version and commit is displayed separately
to aid monitoring tools which only care about the version.
Example output:
# devlink dev info
pci/0000:01:00.0:
driver fbnic
serial_number 88-25-08-ff-ff-01-50-92
versions:
running:
fw 24.07.15-017
fw.commit h999784ae9df0
fw.bootloader 24.07.10-000
fw.bootloader.commit hfef3ac835ce7
stored:
fw 24.07.24-002
fw.commit hc9d14a68b3f2
fw.bootloader 24.07.22-000
fw.bootloader.commit h922f8493eb96
fw.undi 01.00.03-000
Signed-off-by: Lee Trager <lee@trager.us>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20240905233820.1713043-1-lee@trager.us
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert and add a bunch of IBM FSI related bindings
- Add a new schema listing legacy compatibles which will (probably)
never be documented. This will silence various checks warning about
them.
- Add bindings for Sierra Wireless mangOH Green SPI IoT interface,
new Arm 2024 Cortex and Neoverse CPUs, QCom sc8180x PDC, QCom SDX75
GPI DMA, imx8mp/imx8qxp fsl,irqsteer, and Renesas RZ/G2UL CRU and
CSI-2 blocks
- Convert Spreadtrum sprd-timer, FSL cpm_qe, FSL fsl,ls-scfg-msi, FSL
q(b)man-*, FSL qoriq-mc, and img,pdc-wdt bindings to DT schema
- Drop obsolete stericsson,abx500.txt
DT core:
- Update dtc to upstream version v1.7.0-93-g1df7b047fe43
- Add support to run DT validation on DTs with applied overlays
- Add helper for creating boolean properties in dynamic nodes and use
that for dynamic PCI nodes
- Clean-up early parsing of '#{address,size}-cells'"
* tag 'devicetree-for-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (39 commits)
dt-bindings: timer: sprd-timer: convert to YAML
dt-bindings: incomplete-devices: document devices without bindings
dt-bindings: trivial-devices: document the Sierra Wireless mangOH Green SPI IoT interface
scripts/dtc: Update to upstream version v1.7.0-93-g1df7b047fe43
dt-bindings: soc: fsl: Add fsl,ls1028a-reset for reset syscon node
dt-bindings: soc: fsl: cpm_qe: convert to yaml format
dt-bindings: i2c: i2c-fsi: Convert to json-schema
dt-bindings: fsi: Document the FSI Hub Controller
dt-bindings: fsi: Document the AST2700 FSI controller
dt-bindings: fsi: ast2600-fsi-master: Convert to json-schema
dt-bindings: fsi: ibm,i2cr-fsi-master: Reference common FSI controller
dt-bindings: fsi: Document the FSI controller common properties
dt-bindings: fsi: Document the IBM SBEFIFO engine
dt-bindings: fsi: p9-occ: Convert to json-schema
dt-bindings: fsi: Document the IBM SCOM engine
dt-bindings: fsi: fsi2spi: Document SPI controller child nodes
dt-bindings: interrupt-controller: convert fsl,ls-scfg-msi to yaml
dt-bindings: soc: fsl: Convert q(b)man-* to yaml format
dt-bindings: misc: fsl,qoriq-mc: convert to yaml format
dt-bindings: drop stale Anson Huang from maintainers
...
Convert fsl,qoriq-mc from txt to yaml format.
Addition changes:
- Child node name allow 'ethernet'.
- Use 32bit address in example.
- Fixed missed ';' in example.
- Allow dma-coherent.
- Remove smmu, its part in example.
- Change child node name as 'ethernet'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240617170934.813321-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Track the number of times a CQE was expected to not be delivered on PTP Tx
port timestamping CQ. A CQE is expected to not be delivered if a certain
amount of time passes since the corresponding CQE containing the DMA
timestamp information has arrived. Increment the late_cqe counter when such
a CQE does manage to be delivered to the CQ.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20240403212931.128541-3-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Following the addition of new GTP RSS hash options to ethtool.h, this patch
implements the corresponding RSS settings for GTP packets in the Intel ice
driver. It enables users to configure RSS for GTP-U and GTP-C traffic over IPv4
and IPv6, utilizing the newly defined hash options.
The implementation covers the handling of gtpu(4|6), gtpc(4|6), gtpc(4|6)t,
gtpu(4|6)e, gtpu(4|6)u, and gtpu(4|6)d traffic, providing enhanced load
distribution for GTP traffic across multiple processing units.
Signed-off-by: Takeru Hayasaka <hayatake396@gmail.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC VF.
Add implementation to load module, initialize, register network device,
cleanup and unload module.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On early detection of wwan device in fastboot mode, driver sets
up CLDMA0 HW tx/rx queues for raw data transfer and then create
fastboot port to userspace.
Application can use this port to flash firmware and collect
core dump by fastboot protocol commands.
E.g., flash firmware through fastboot port:
- "download:%08x": write data to memory with the download size.
- "flash:%s": write the previously downloaded image to the named partition.
- "reboot": reboot the device.
Link: https://android.googlesource.com/platform/system/core/+/refs/heads/main/fastboot/README.md
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for userspace to get/set the device mode, device's state
machine changes between (unknown/ready/reset/fastboot).
Get the device state mode:
- 'cat /sys/bus/pci/devices/${bdf}/t7xx_mode'
Set the device state mode:
- reset(cold reset): 'echo reset > /sys/bus/pci/devices/${bdf}/t7xx_mode'
- fastboot: 'echo fastboot_switching > /sys/bus/pci/devices/${bdf}/t7xx_mode'
Reload driver to get the new device state after setting operation.
Signed-off-by: Jinjian Song <jinjian.song@fibocom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch contains more details about the functionality
of RX copybreak.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
XDP system has a very large footprint in the driver's overall code.
makes the whole driver's code much harder to read.
Moving XDP code to dedicated files.
This patch doesn't make any changes to the code itself and only
cut-pastes the code into ena_xdp.c and ena_xdp.h files so the change
is purely cosmetic.
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David Arinzon <darinzon@amazon.com>
Link: https://lore.kernel.org/r/20240101190855.18739-2-darinzon@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add driver framework and device setup and initialization for Octeon
PCI Endpoint NIC VF.
Add implementation to load module, initialize, register network device,
cleanup and unload module.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add documentation for FW logging in
Documentation/networking/device_drivers/ethernet/intel/ice.rst
Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add PCI Endpoint NIC support for Octeon CN98 devices.
CN98 devices are part of Octeon 9 family products with
similar PCI NIC characteristics to CN93, already supported
driver.
Add CN98 card to the device id table, as well
as support differences in the register fields and
certain usage scenarios such as unload.
Signed-off-by: Shinas Rasheed <srasheed@marvell.com>
Link: https://lore.kernel.org/r/20231129045348.2538843-3-srasheed@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.8
The first features pull request for v6.8. Not so big in number of
commits but we removed quite a few ancient drivers: libertas 16-bit
PCMCIA support, atmel, hostap, zd1201, orinoco, ray_cs, wl3501 and
rndis_wlan.
Major changes:
cfg80211/mac80211
- extend support for scanning while Multi-Link Operation (MLO) connected
* tag 'wireless-next-2023-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (68 commits)
wifi: nl80211: Documentation update for NL80211_CMD_PORT_AUTHORIZED event
wifi: mac80211: Extend support for scanning while MLO connected
wifi: cfg80211: Extend support for scanning while MLO connected
wifi: ieee80211: fix PV1 frame control field name
rfkill: return ENOTTY on invalid ioctl
MAINTAINERS: update iwlwifi maintainers
wifi: rtw89: 8922a: read efuse content from physical map
wifi: rtw89: 8922a: read efuse content via efuse map struct from logic map
wifi: rtw89: 8852c: read RX gain offset from efuse for 6GHz channels
wifi: rtw89: mac: add to access efuse for WiFi 7 chips
wifi: rtw89: mac: use mac_gen pointer to access about efuse
wifi: rtw89: 8922a: add 8922A basic chip info
wifi: rtlwifi: drop unused const_amdpci_aspm
wifi: mwifiex: mwifiex_process_sleep_confirm_resp(): remove unused priv variable
wifi: rtw89: regd: update regulatory map to R65-R44
wifi: rtw89: regd: handle policy of 6 GHz according to BIOS
wifi: rtw89: acpi: process 6 GHz band policy from DSM
wifi: rtlwifi: simplify rtl_action_proc() and rtl_tx_agg_start()
wifi: rtw89: pci: update interrupt mitigation register for 8922AE
wifi: rtw89: pci: correct interrupt mitigation register for 8852CE
...
====================
Link: https://lore.kernel.org/r/20231127180056.0B48DC433C8@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver updates for 6.7-rc1. A bit
bigger than 6.6 this time around, as it coincided with the Outreachy
and mentorship application process, so we got a bunch of new
developers sending in their first changes, which is nice to see.
Also in here is a removal of the qlge ethernet driver, and the
rtl8192u wireless driver. Both of these were very old and no one was
maintaining them, the wireless driver removal was due to no one using
it anymore, and no hardware to be found, and is part of a larger
effort to remove unused and old wifi drivers from the system.
The qlge ethernet driver did have one user pop up after it was
dropped, and we are working with the network mainainers to figure out
what tree it will come back in from and who will be responsible for
it, and if it really is being used or not. Odds are it will show up in
a network subsystem pull request after -rc1 is out, but we aren't sure
yet.
Other smaller changes in here are:
- Lots of vc04_services work by Umang to clean up the mess created by
the rpi developers long ago, bringing it almost into good enough
shape to get out of staging, hopefully next major release, it's
getting close.
- rtl8192e variable cleanups and removal of unused code and
structures
- vme_user coding style cleanups
- other small coding style cleanups to lots of the staging drivers
- octeon typedef removals, and then last-minute revert when it was
found to break the build in some configurations (it's a hard driver
to build properly, none of the normal automated testing catches
it.)
All of these have been in linux-next for a while with no reported
issues"
* tag 'staging-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (256 commits)
Revert "staging: octeon: remove typedef in enum cvmx_spi_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_helper_interface_mode_t"
Revert "staging: octeon: remove typedef in enum cvmx_pow_wait_t"
Revert "staging: octeon: remove typedef in struct cvmx_pko_lock_t"
Revert "staging: octeon: remove typedef in enum cvmx_pko_status_t"
Revert "staging: octeon: remove typedef in structs cvmx_pip_port_status_t and cvmx_pko_port_status_t"
staging: vt6655: Type encoding info dropped from variable name "byRxRate"
staging: vt6655: Type encoding info dropped from function name "CARDbUpdateTSF"
staging: vt6655: Type encoding info dropped from function name "CARDvSetRSPINF"
staging: vt6655: Type encoding info dropped from function name "CARDbyGetPktType"
staging: vt6655: Type encoding info dropped from variable name "byPacketType"
staging: vt6655: Type encoding info dropped from function name "CARDbSetPhyParameter"
staging: vt6655: Type encoding info dropped from variable name "pbyRsvTime"
staging: vt6655: Type encoding info dropped from variable name "pbyTxRate"
staging: vt6655: Type encoding info dropped from function name "s_vCalculateOFDMRParameter"
staging: vt6655: Type encoding info dropped from array name "cwRXBCNTSFOff"
staging: fbtft: Convert to platform remove callback returning void
staging: olpc_dcon: Remove I2C_CLASS_DDC support
staging: vc04_services: use snprintf instead of sprintf
staging: rtl8192e: Fix line break issue at priv->rx_buf[priv->rx_idx]
...
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
Aviator/Raytheon is an early PCMCIA driver, apparently predating 802.11b
and only supporting wireless extensions.
The driver has been orphaned since 2010 and only seen cosmetic updates
long before than. Jean Tourrilhes pointed out in a 2005 changelog that
he tested a change on actual hardware, which was apparently already
noteworthy back then.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Commit a12ba19269 ("net/mlx5: Update Kconfig parameter documentation")
adds documentation on Kconfig options for the mlx5 driver. It refers to the
config MLX5_EN_MACSEC for MACSec offloading, but the config is actually
called MLX5_MACSEC.
Fix the reference to the right config name in the documentation.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for SRIOV: send the requested number of VFs
to the device Control Plane, via the virtchnl message
and then enable the VFs using 'pci_enable_sriov'.
Add other ndo ops supported by the driver such as features_check,
set_rx_mode, validate_addr, set_mac_address, change_mtu, get_stats64,
set_features, and tx_timeout. Initialize the statistics task which
requests the queue related statistics to the CP. Add loopback
and promiscuous mode support and the respective virtchnl messages.
Finally, add documentation and build support for the driver.
Signed-off-by: Joshua Hay <joshua.a.hay@intel.com>
Co-developed-by: Alan Brady <alan.brady@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Co-developed-by: Madhu Chittim <madhu.chittim@intel.com>
Signed-off-by: Madhu Chittim <madhu.chittim@intel.com>
Co-developed-by: Phani Burra <phani.r.burra@intel.com>
Signed-off-by: Phani Burra <phani.r.burra@intel.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Co-developed-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Pavan Kumar Linga <pavan.kumar.linga@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Pull VFIO updates from Alex Williamson:
- VFIO direct character device (cdev) interface support. This extracts
the vfio device fd from the container and group model, and is
intended to be the native uAPI for use with IOMMUFD (Yi Liu)
- Enhancements to the PCI hot reset interface in support of cdev usage
(Yi Liu)
- Fix a potential race between registering and unregistering vfio files
in the kvm-vfio interface and extend use of a lock to avoid extra
drop and acquires (Dmitry Torokhov)
- A new vfio-pci variant driver for the AMD/Pensando Distributed
Services Card (PDS) Ethernet device, supporting live migration (Brett
Creeley)
- Cleanups to remove redundant owner setup in cdx and fsl bus drivers,
and simplify driver init/exit in fsl code (Li Zetao)
- Fix uninitialized hole in data structure and pad capability
structures for alignment (Stefan Hajnoczi)
* tag 'vfio-v6.6-rc1' of https://github.com/awilliam/linux-vfio: (53 commits)
vfio/pds: Send type for SUSPEND_STATUS command
vfio/pds: fix return value in pds_vfio_get_lm_file()
pds_core: Fix function header descriptions
vfio: align capability structures
vfio/type1: fix cap_migration information leak
vfio/fsl-mc: Use module_fsl_mc_driver macro to simplify the code
vfio/cdx: Remove redundant initialization owner in vfio_cdx_driver
vfio/pds: Add Kconfig and documentation
vfio/pds: Add support for firmware recovery
vfio/pds: Add support for dirty page tracking
vfio/pds: Add VFIO live migration support
vfio/pds: register with the pds_core PF
pds_core: Require callers of register/unregister to pass PF drvdata
vfio/pds: Initial support for pds VFIO driver
vfio: Commonize combine_ranges for use in other VFIO drivers
kvm/vfio: avoid bouncing the mutex when adding and deleting groups
kvm/vfio: ensure kvg instance stays around in kvm_vfio_group_add()
docs: vfio: Add vfio device cdev description
vfio: Compile vfio_group infrastructure optionally
vfio: Move the IOMMU_CAP_CACHE_COHERENCY check in __vfio_register_dev()
...
Implement devlink port function commands to enable / disable IPsec
packet offloads. This is used to control the IPsec capability of the
device.
When ipsec_offload is enabled for a VF, it prevents adding IPsec packet
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec packet
offloads on the PF, it's not allowed to enable ipsec_packet on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-9-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Implement devlink port function commands to enable / disable IPsec
crypto offloads. This is used to control the IPsec capability of the
device.
When ipsec_crypto is enabled for a VF, it prevents adding IPsec crypto
offloads on the PF, because the two cannot be active simultaneously due
to HW constraints. Conversely, if there are any active IPsec crypto
offloads on the PF, it's not allowed to enable ipsec_crypto on a VF,
until PF IPsec offloads are cleared.
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Link: https://lore.kernel.org/r/20230825062836.103744-8-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Point to NVIDIA documentation for device specific information now that the
Mellanox documentation site is deprecated. Refer to kernel documentation
sources for generic information not specific to mlx5 devices.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Improve aRFS observability by adding new set of counters. Each Rx
ring will have this set of counters listed below.
These counters are exposed through ethtool -S.
1) arfs_add: number of times a new rule has been created.
2) arfs_request_in: number of times a rule was requested to move from
its current Rx ring to a new Rx ring (incremented on the destination
Rx ring).
3) arfs_request_out: number of times a rule was requested to move out
from its current Rx ring (incremented on source/current Rx ring).
4) arfs_expired: number of times a rule has been expired by the
kernel and removed from HW.
5) arfs_err: number of times a rule creation or modification has
failed.
This patch removes rx[i]_xsk_arfs_err counter and its documentation in
mlx5/counters.rst since aRFS activity does not occur in XSK RQ's.
Signed-off-by: Adham Faris <afaris@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Use a map structure for associating CQEs containing port timestamping
information with the appropriate skb. Track order of WQEs submitted using a
FIFO. Check if the corresponding port timestamping CQEs from the lookup
values in the FIFO are considered dropped due to time elapsed. Return the
lookup value to a freelist after consuming the skb. Reuse the freed lookup
in future WQE submission iterations.
The map structure uses an integer identifier for the key and returns an skb
corresponding to that identifier. Embed the integer identifier in the WQE
submitted to the WQ for the transmit path when the SQ is a PTP (port
timestamping) SQ. The embedded identifier can then be queried using a field
in the CQE of the corresponding port timestamping CQ. In the port
timestamping napi_poll context, the identifier is queried from the CQE
polled from CQ and used to lookup the corresponding skb from the WQE submit
path. The skb reference is removed from map and then embedded with the port
HW timestamp information from the CQE and eventually consumed.
The metadata freelist FIFO is an array containing integer identifiers that
can be pushed and popped in the FIFO. The purpose of this structure is
bookkeeping what identifier values can safely be used in a subsequent WQE
submission and should not contain identifiers that have still not been
reaped by processing a corresponding CQE completion on the port
timestamping CQ.
The ts_cqe_pending_list structure is a combination of an array and linked
list. The array is pre-populated with the nodes that will be added and
removed from the head of the linked list. Each node contains the unique
identifier value associated with the values submitted in the WQEs and
retrieved in the port timestamping CQEs. When a WQE is submitted, the node
in the array corresponding to the identifier popped from the metadata
freelist is added to the end of the CQE pending list and is marked as
"in-use". The node is removed from the linked list under two conditions.
The first condition is that the corresponding port timestamping CQE is
polled in the PTP napi_poll context. The second condition is that more than
a second has elapsed since the DMA timestamp value corresponding to the WQE
submission. When the first condition occurs, the "in-use" bit in the linked
list node is cleared, and the resources corresponding to the WQE submission
are then released. The second condition, however, indicates that the port
timestamping CQE will likely never be delivered. It's not impossible for
the device to post a CQE after an infinite amount of time though highly
improbable. In order to be resilient to this improbable case, resources
related to the corresponding WQE submission are still kept, the identifier
value is not returned to the freelist, and the "in-use" bit is cleared on
the node to indicate that it's no longer part of the linked list of "likely
to be delivered" port timestamping CQE identifiers. A count for the number
of port timestamping CQEs considered highly likely to never be delivered by
the device is maintained. This count gets decremented in the unlikely event
a port timestamping CQE considered unlikely to ever be delivered is polled
in the PTP napi_poll context.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
De-duplicate documentation by removing mellanox/mlx5/devlink.rst. Instead,
only use the generic devlink documentation directory to document mlx5
devlink parameters. Avoid providing general devlink tool usage information
in mlx5-specific documentation.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add example tc-htb commands for Round robin scheduling
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
