The dev_err_probe() function is quite useful to avoid boilerplate
related to -EPROBE_DEFER handling. Add a phydev_err_probe() helper to
simplify making use of that from phy drivers which otherwise use the
phydev_* helpers.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Mostly driver fixes.
Current release - regressions:
- Revert "net: Add a second bind table hashed by port and address",
needs more work
- amd-xgbe: use platform_irq_count(), static setup of IRQ resources
had been removed from DT core
- dts: at91: ksz9477_evb: add phy-mode to fix port/phy validation
Current release - new code bugs:
- hns3: modify the ring param print info
Previous releases - always broken:
- axienet: make the 64b addressable DMA depends on 64b architectures
- iavf: fix issue with MAC address of VF shown as zero
- ice: fix PTP TX timestamp offset calculation
- usb: ax88179_178a needs FLAG_SEND_ZLP
Misc:
- document some net.sctp.* sysctls"
* tag 'net-5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (31 commits)
net: axienet: add missing error return code in axienet_probe()
Revert "net: Add a second bind table hashed by port and address"
net: ax25: Fix deadlock caused by skb_recv_datagram in ax25_recvmsg
net: usb: ax88179_178a needs FLAG_SEND_ZLP
MAINTAINERS: add include/dt-bindings/net to NETWORKING DRIVERS
ARM: dts: at91: ksz9477_evb: fix port/phy validation
net: bgmac: Fix an erroneous kfree() in bgmac_remove()
ice: Fix memory corruption in VF driver
ice: Fix queue config fail handling
ice: Sync VLAN filtering features for DVM
ice: Fix PTP TX timestamp offset calculation
mlxsw: spectrum_cnt: Reorder counter pools
docs: networking: phy: Fix a typo
amd-xgbe: Use platform_irq_count()
octeontx2-vf: Add support for adaptive interrupt coalescing
xilinx: Fix build on x86.
net: axienet: Use iowrite64 to write all 64b descriptor pointers
net: axienet: make the 64b addresable DMA depends on 64b archectures
net: hns3: fix tm port shapping of fibre port is incorrect after driver initialization
net: hns3: fix PF rss size initialization bug
...
Pull hardening fixes from Kees Cook:
- Correctly handle vm_map areas in hardened usercopy (Matthew Wilcox)
- Adjust CFI RCU usage to avoid boot splats with cpuidle (Sami Tolvanen)
* tag 'hardening-v5.19-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
usercopy: Make usercopy resilient against ridiculously large copies
usercopy: Cast pointer to an integer once
usercopy: Handle vm_map_ram() areas
cfi: Fix __cfi_slowpath_diag RCU usage with cpuidle
Saeed Mahameed says:
====================
mlx5-next: updates 2022-06-14
1) Updated HW bits and definitions for upcoming features
1.1) vport debug counters
1.2) flow meter
1.3) Execute ASO action for flow entry
1.4) enhanced CQE compression
2) Add ICM header-modify-pattern RDMA API
Leon Says
=========
SW steering manipulates packet's header using "modifying header" actions.
Many of these actions do the same operation, but use different data each time.
Currently we create and keep every one of these actions, which use expensive
and limited resources.
Now we introduce a new mechanism - pattern and argument, which splits
a modifying action into two parts:
1. action pattern: contains the operations to be applied on packet's header,
mainly set/add/copy of fields in the packet
2. action data/argument: contains the data to be used by each operation
in the pattern.
This way we reuse same patterns with different arguments to create new
modifying actions, and since many actions share the same operations, we end
up creating a small number of patterns that we keep in a dedicated cache.
These modify header patterns are implemented as new type of ICM memory,
so the following kernel patch series add the support for this new ICM type.
==========
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Add bits and fields to support enhanced CQE compression
net/mlx5: Remove not used MLX5_CAP_BITS_RW_MASK
net/mlx5: group fdb cleanup to single function
net/mlx5: Add support EXECUTE_ASO action for flow entry
net/mlx5: Add HW definitions of vport debug counters
net/mlx5: Add IFC bits and enums for flow meter
RDMA/mlx5: Support handling of modify-header pattern ICM area
net/mlx5: Manage ICM of type modify-header pattern
net/mlx5: Introduce header-modify-pattern ICM properties
====================
Link: https://lore.kernel.org/r/20220614184028.51548-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit e81fb4198e ("netfs: Further cleanups after struct netfs_inode
wrapper introduced") changed the argument types and names, and actually
updated the comment too (although that was thanks to David Howells, not
me: my original patch only changed the code).
But the comment fixup didn't go quite far enough, and didn't change the
argument name in the comment, resulting in
include/linux/netfs.h:314: warning: Function parameter or member 'ctx' not described in 'netfs_inode_init'
include/linux/netfs.h:314: warning: Excess function parameter 'inode' description in 'netfs_inode_init'
during htmldoc generation.
Fixes: e81fb4198e ("netfs: Further cleanups after struct netfs_inode wrapper introduced")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull x86 MMIO stale data fixes from Thomas Gleixner:
"Yet another hw vulnerability with a software mitigation: Processor
MMIO Stale Data.
They are a class of MMIO-related weaknesses which can expose stale
data by propagating it into core fill buffers. Data which can then be
leaked using the usual speculative execution methods.
Mitigations include this set along with microcode updates and are
similar to MDS and TAA vulnerabilities: VERW now clears those buffers
too"
* tag 'x86-bugs-2022-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/speculation/mmio: Print SMT warning
KVM: x86/speculation: Disable Fill buffer clear within guests
x86/speculation/mmio: Reuse SRBDS mitigation for SBDS
x86/speculation/srbds: Update SRBDS mitigation selection
x86/speculation/mmio: Add sysfs reporting for Processor MMIO Stale Data
x86/speculation/mmio: Enable CPU Fill buffer clearing on idle
x86/bugs: Group MDS, TAA & Processor MMIO Stale Data mitigations
x86/speculation/mmio: Add mitigation for Processor MMIO Stale Data
x86/speculation: Add a common function for MD_CLEAR mitigation update
x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
Documentation: Add documentation for Processor MMIO Stale Data
Expose ifc bits and add needed structure fields and methods to
support enhanced CQE compression feature.
The enhanced CQE compression feature improves cpu utiliziation with
better packet latency from nic to host.
Signed-off-by: Ofer Levi <oferle@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Remove not used MLX5_CAP_BITS_RW_MASK.
While at it, remove CAP_MASK, MLX5_CAP_OFF_CMDIF_CSUM
and MLX5_DEV_CAP_FLAG_*, since MLX5_CAP_BITS_RW_MASK
was their only user.
Signed-off-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Attach flow meter to FTE with object id and index.
Use metadata register C5 to store the packet color meter result.
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
total_q_under_processor_handle - number of queues in error state due to an
async error or errored command.
send_queue_priority_update_flow - number of QP/SQ priority/SL update
events.
cq_overrun - number of times CQ entered an error state due to an
overflow.
async_eq_overrun -number of time an EQ mapped to async events was
overrun.
comp_eq_overrun - number of time an EQ mapped to completion events was
overrun.
quota_exceeded_command - number of commands issued and failed due to quota
exceeded.
invalid_command - number of commands issued and failed dues to any reason
other than quota exceeded.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add support for allocate/deallocate and registering MR of the new type
of ICM area. Support exists only for devices that support sw_owner_v2.
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Added new fields for device memory capabilities, in order to
support creation of ICM memory for modify header patterns.
Signed-off-by: Erez Shitrit <erezsh@mellanox.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
__sys_accept4_file() isn't used outside of the file, make it static.
As the same time, move file_flags and nofile parameters into
__sys_accept4_file().
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Signed-off-by: David S. Miller <davem@davemloft.net>
sk_memory_allocated_add() has three callers, and returns
to them @memory_allocated.
sk_forced_mem_schedule() is one of them, and ignores
the returned value.
Change sk_memory_allocated_add() to return void.
Change sock_reserve_memory() and __sk_mem_raise_allocated()
to call sk_memory_allocated().
This removes one cache line miss [1] for RPC workloads,
as first skbs in TCP write queue and receive queue go through
sk_forced_mem_schedule().
[1] Cache line holding tcp_memory_allocated.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull workqueue fixes from Tejun Heo:
"Tetsuo's patch to trigger build warnings if system-wide wq's are
flushed along with a TP type update and trivial comment update"
* tag 'wq-for-5.19-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Switch to new kerneldoc syntax for named variable macro argument
workqueue: Fix type of cpu in trace event
workqueue: Wrap flush_workqueue() using a macro
Pull random number generator fixes from Jason Donenfeld:
- A fix for a 5.19 regression for a case in which early device tree
initializes the RNG, which flips a static branch.
On most plaforms, jump labels aren't initialized until much later, so
this caused splats. On a few mailing list threads, we cooked up easy
fixes for arm64, arm32, and risc-v. But then things looked slightly
more involved for xtensa, powerpc, arc, and mips. And at that point,
when we're patching 7 architectures in a place before the console is
even available, it seems like the cost/risk just wasn't worth it.
So random.c works around it now by checking the already exported
`static_key_initialized` boolean, as though somebody already ran into
this issue in the past. I'm not super jazzed about that; it'd be
prettier to not have to complicate downstream code. But I suppose
it's practical.
- A few small code nits and adding a missing __init annotation.
- A change to the default config values to use the cpu and bootloader's
seeds for initializing the RNG earlier.
This brings them into line with what all the distros do (Fedora/RHEL,
Debian, Ubuntu, Gentoo, Arch, NixOS, Alpine, SUSE, and Void... at
least), and moreover will now give us test coverage in various test
beds that might have caught the above device tree bug earlier.
- A change to WireGuard CI's configuration to increase test coverage
around the RNG.
- A documentation comment fix to unrelated maintainerless CRC code that
I was asked to take, I guess because it has to do with polynomials
(which the RNG thankfully no longer uses).
* tag 'random-5.19-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
wireguard: selftests: use maximum cpu features and allow rng seeding
random: remove rng_has_arch_random()
random: credit cpu and bootloader seeds by default
random: do not use jump labels before they are initialized
random: account for arch randomness in bits
random: mark bootloader randomness code as __init
random: avoid checking crng_ready() twice in random_init()
crc-itu-t: fix typo in CRC ITU-T polynomial comment
The syntax without dots is available since commit 43756e347f
("scripts/kernel-doc: Add support for named variable macro arguments").
The same HTML output is produced with and without this patch.
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull virtio fixes from Michael Tsirkin:
"Fixes all over the place, most notably fixes for latent bugs in
drivers that got exposed by suppressing interrupts before DRIVER_OK,
which in turn has been done by 8b4ec69d7e ("virtio: harden vring
IRQ")"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
um: virt-pci: set device ready in probe()
vdpa: make get_vq_group and set_group_asid optional
virtio: Fix all occurences of the "the the" typo
vduse: Fix NULL pointer dereference on sysfs access
vringh: Fix loop descriptors check in the indirect cases
vdpa/mlx5: clean up indenting in handle_ctrl_vlan()
vdpa/mlx5: fix error code for deleting vlan
virtio-mmio: fix missing put_device() when vm_cmdline_parent registration failed
vdpa/mlx5: Fix syntax errors in comments
virtio-rng: make device ready before making request
Pull nfsd fixes from Chuck Lever:
"Notable changes:
- There is now a backup maintainer for NFSD
Notable fixes:
- Prevent array overruns in svc_rdma_build_writes()
- Prevent buffer overruns when encoding NFSv3 READDIR results
- Fix a potential UAF in nfsd_file_put()"
* tag 'nfsd-5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
SUNRPC: Remove pointer type casts from xdr_get_next_encode_buffer()
SUNRPC: Clean up xdr_get_next_encode_buffer()
SUNRPC: Clean up xdr_commit_encode()
SUNRPC: Optimize xdr_reserve_space()
SUNRPC: Fix the calculation of xdr->end in xdr_get_next_encode_buffer()
SUNRPC: Trap RDMA segment overflows
NFSD: Fix potential use-after-free in nfsd_file_put()
MAINTAINERS: reciprocal co-maintainership for file locking and nfsd
Pull device mapper fixes from Mike Snitzer:
- Fix DM core's bioset initialization so that blk integrity pool is
properly setup. Remove now unused bioset_init_from_src.
- Fix DM zoned hang from locking imbalance due to needless check in
clone_endio().
* tag 'for-5.19/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix zoned locking imbalance due to needless check in clone_endio
block: remove bioset_init_from_src
dm: fix bio_set allocation
Currently, tcp_memory_allocated can hit tcp_mem[] limits quite fast.
Each TCP socket can forward allocate up to 2 MB of memory, even after
flow became less active.
10,000 sockets can have reserved 20 GB of memory,
and we have no shrinker in place to reclaim that.
Instead of trying to reclaim the extra allocations in some places,
just keep sk->sk_forward_alloc values as small as possible.
This should not impact performance too much now we have per-cpu
reserves: Changes to tcp_memory_allocated should not be too frequent.
For sockets not using SO_RESERVE_MEM:
- idle sockets (no packets in tx/rx queues) have zero forward alloc.
- non idle sockets have a forward alloc smaller than one page.
Note:
- Removal of SK_RECLAIM_CHUNK and SK_RECLAIM_THRESHOLD
is left to MPTCP maintainers as a follow up.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If sk->sk_forward_alloc is 150000, and we need to schedule 150001 bytes,
we want to allocate 1 byte more (rounded up to one page),
instead of 150001 :/
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We plan keeping sk->sk_forward_alloc as small as possible
in future patches.
This means we are going to call sk_memory_allocated_add()
and sk_memory_allocated_sub() more often.
Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Each protocol having a ->memory_allocated pointer gets a corresponding
per-cpu reserve, that following patches will use.
Instead of having reserved bytes per socket,
we want to have per-cpu reserves.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to memcg interface, SK_MEM_QUANTUM is effectively PAGE_SIZE.
This might change in the future, but it seems better to avoid the
confusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This reverts commit bd68a2a854.
This change broke memcg on arches with PAGE_SIZE != 4096
Later, commit 2bb2f5fb21 ("net: add new socket option SO_RESERVE_MEM")
also assumed PAGE_SIZE==SK_MEM_QUANTUM
Following patches in the series will greatly reduce the over allocations
problem.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull fscache cleanups from David Howells:
- fix checker complaint in afs
- two netfs cleanups:
- netfs_inode calling convention cleanup plus the requisite
documentation changes
- replace the ->cleanup op with a ->free_request op.
This is possible as the I/O request is now always available at
the cleanup point as the stuff to be cleaned up is no longer
passed into the API functions, but rather obtained by ->init_request.
* 'fscache-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
netfs: Rename the netfs_io_request cleanup op and give it an op pointer
netfs: Further cleanups after struct netfs_inode wrapper introduced
afs: Fix some checker issues
The netfs_io_request cleanup op is now always in a position to be given a
pointer to a netfs_io_request struct, so this can be passed in instead of
the mapping and private data arguments (both of which are included in the
struct).
So rename the ->cleanup op to ->free_request (to match ->init_request) and
pass in the I/O pointer.
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: linux-cachefs@redhat.com
Change the signature of netfs helper functions to take a struct netfs_inode
pointer rather than a struct inode pointer where appropriate, thereby
relieving the need for the network filesystem to convert its internal inode
format down to the VFS inode only for netfslib to bounce it back up. For
type safety, it's better not to do that (and it's less typing too).
Give netfs_write_begin() an extra argument to pass in a pointer to the
netfs_inode struct rather than deriving it internally from the file
pointer. Note that the ->write_begin() and ->write_end() ops are intended
to be replaced in the future by netfslib code that manages this without the
need to call in twice for each page.
netfs_readpage() and similar are intended to be pointed at directly by the
address_space_operations table, so must stick to the signature dictated by
the function pointers there.
Changes
=======
- Updated the kerneldoc comments and documentation [DH].
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-cachefs@redhat.com
Link: https://lore.kernel.org/r/CAHk-=wgkwKyNmNdKpQkqZ6DnmUL-x9hp0YBnUGjaPFEAdxDTbw@mail.gmail.com/
Pull folio fixes from Matthew Wilcox:
"Four folio-related fixes:
- Don't release a folio while it's still locked
- Fix a use-after-free after dropping the mmap_lock
- Fix a memory leak when splitting a page
- Fix a kernel-doc warning for struct folio"
* tag 'folio-5.19a' of git://git.infradead.org/users/willy/pagecache:
mm: Add kernel-doc for folio->mlock_count
mm/huge_memory: Fix xarray node memory leak
filemap: Cache the value of vm_flags
filemap: Don't release a locked folio
Pull ATA fixes from Damien Le Moal:
"Several small fixes for rc2:
- Remove unused field in struct ata_port (Hannes)
- Fix a potential (very unlikely) NULL pointer dereference in
ata_host_alloc_pinfo() (Sergey)
- Fix a device reference leak in the pata_octeon_cf driver (Miaoqian)
- Fixes for handling access to the concurrent positioning ranges log
page used with multi-actuator HDDs (Tyler)
- Fix the values shown by the pio_mode and dma_mode sysfs device
attributes (Sergey)
- Update the MAINTAINERS file to add libata sysfs ABI documentation
file (Sergey)"
* tag 'ata-5.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
MAINTAINERS: add ATA sysfs file documentation to libata entry
ata: libata-transport: fix {dma|pio|xfer}_mode sysfs files
libata: fix translation of concurrent positioning ranges
libata: fix reading concurrent positioning ranges log
ata: pata_octeon_cf: Fix refcount leak in octeon_cf_probe
ata: libata-core: fix NULL pointer deref in ata_host_alloc_pinfo()
ata: libata: drop 'sas_last_tag'
Pull networking fixes from Jakub Kicinski:
"Quick follow up, to cleanly fast-forward net again.
Current release - new code bugs:
- Revert "net/mlx5e: Allow relaxed ordering over VFs"
Previous releases - regressions:
- seg6: fix seg6_lookup_any_nexthop() to handle VRFs using
flowi_l3mdev
Misc:
- rename TLS_INFO_ZC_SENDFILE to better express the meaning"
* tag 'net-5.19-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
net: seg6: fix seg6_lookup_any_nexthop() to handle VRFs using flowi_l3mdev
nfp: flower: restructure flow-key for gre+vlan combination
nfp: avoid unnecessary check warnings in nfp_app_get_vf_config
tls: Rename TLS_INFO_ZC_SENDFILE to TLS_INFO_ZC_TX
net/mlx5: fs, fail conflicting actions
net/mlx5: Rearm the FW tracer after each tracer event
net/mlx5: E-Switch, pair only capable devices
net/mlx5e: CT: Fix cleanup of CT before cleanup of TC ct rules
Revert "net/mlx5e: Allow relaxed ordering over VFs"
MAINTAINERS: adjust MELLANOX ETHERNET INNOVA DRIVERS to TLS support removal
Pull xen updates from Juergen Gross:
- a small cleanup removing "export" of an __init function
- a small series adding a new infrastructure for platform flags
- a series adding generic virtio support for Xen guests (frontend side)
* tag 'for-linus-5.19a-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: unexport __init-annotated xen_xlate_map_ballooned_pages()
arm/xen: Assign xen-grant DMA ops for xen-grant DMA devices
xen/grant-dma-ops: Retrieve the ID of backend's domain for DT devices
xen/grant-dma-iommu: Introduce stub IOMMU driver
dt-bindings: Add xen,grant-dma IOMMU description for xen-grant DMA ops
xen/virtio: Enable restricted memory access using Xen grant mappings
xen/grant-dma-ops: Add option to restrict memory access under Xen
xen/grants: support allocating consecutive grants
arm/xen: Introduce xen_setup_dma_ops()
virtio: replace arch_has_restricted_virtio_memory_access()
kernel: add platform_has() infrastructure
Johannes Berg says:
====================
wireless-next patches for v5.20
Here's a first set of patches for v5.20. This is just a
queue flush, before we get things back from net-next that
are causing conflicts, and then can start merging a lot
of MLO (multi-link operation, part of 802.11be) code.
Lots of cleanups all over.
The only notable change is perhaps wilc1000 being the
first driver to disable WEP (while enabling WPA3).
* tag 'wireless-next-2022-06-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (29 commits)
wifi: mac80211_hwsim: Directly use ida_alloc()/free()
wifi: mac80211: refactor some key code
wifi: mac80211: remove cipher scheme support
wifi: nl80211: fix typo in comment
wifi: virt_wifi: fix typo in comment
rtw89: add new state to CFO state machine for UL-OFDMA
rtw89: 8852c: add trigger frame counter
ieee80211: add trigger frame definition
wifi: wfx: Remove redundant NULL check before release_firmware() call
wifi: rtw89: support MULTI_BSSID and correct BSSID mask of H2C
wifi: ray_cs: Drop useless status variable in parse_addr()
wifi: ray_cs: Utilize strnlen() in parse_addr()
wifi: rtw88: use %*ph to print small buffer
wifi: wilc1000: add IGTK support
wifi: wilc1000: add WPA3 SAE support
wifi: wilc1000: remove WEP security support
wifi: wilc1000: use correct sequence of RESET for chip Power-UP/Down
wifi: rtlwifi: fix error codes in rtl_debugfs_set_write_h2c()
wifi: rtw88: Fix Sparse warning for rtw8821c_hw_spec
wifi: rtw88: Fix Sparse warning for rtw8723d_hw_spec
...
====================
Link: https://lore.kernel.org/r/20220610142838.330862-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The only driver using this was iwlwifi, where we just removed
the support because it was never really used. Remove the code
from mac80211 as well.
Change-Id: I1667417a5932315ee9d81f5c233c56a354923f09
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With arch randomness being used by every distro and enabled in
defconfigs, the distinction between rng_has_arch_random() and
rng_is_initialized() is now rather small. In fact, the places where they
differ are now places where paranoid users and system builders really
don't want arch randomness to be used, in which case we should respect
that choice, or places where arch randomness is known to be broken, in
which case that choice is all the more important. So this commit just
removes the function and its one user.
Reviewed-by: Petr Mladek <pmladek@suse.com> # for vsprintf.c
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
add_bootloader_randomness() and the variables it touches are only used
during __init and not after, so mark these as __init. At the same time,
unexport this, since it's only called by other __init code that's
built-in.
Cc: stable@vger.kernel.org
Fixes: 428826f535 ("fdt: add support for rng-seed")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Add support for reporting errors via extack in both bond_newlink
and bond_changelink.
Instead of having to look in the kernel log for why an option was not
correct just report the error to the user via the extack variable.
What is currently reported today:
ip link add bond0 type bond
ip link set bond0 up
ip link set bond0 type bond mode 4
RTNETLINK answers: Device or resource busy
After this change:
ip link add bond0 type bond
ip link set bond0 up
ip link set bond0 type bond mode 4
Error: unable to set option because the bond is up.
Signed-off-by: Jonathan Toppins <jtoppins@redhat.com>
Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As explained in commit 316580b69d ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As explained in commit 316580b69d ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As explained in commit 316580b69d ("u64_stats: provide u64_stats_t type")
we should use u64_stats_t and related accessors to avoid load/store tearing.
Add READ_ONCE() when reading rx_errors & tx_dropped.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Netdev reference helpers have a dev_ prefix for historic
reasons. Renaming the old helpers would be too much churn
but we can rename the tracking ones which are relatively
recent and should be the default for new code.
Rename:
dev_hold_track() -> netdev_hold()
dev_put_track() -> netdev_put()
dev_replace_track() -> netdev_ref_replace()
Link: https://lore.kernel.org/r/20220608043955.919359-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
