Pull scheduler updates from Ingo Molnar:
- Add cpufreq pressure feedback for the scheduler
- Rework misfit load-balancing wrt affinity restrictions
- Clean up and simplify the code around ::overutilized and
::overload access.
- Simplify sched_balance_newidle()
- Bump SCHEDSTAT_VERSION to 16 due to a cleanup of CPU_MAX_IDLE_TYPES
handling that changed the output.
- Rework & clean up <asm/vtime.h> interactions wrt arch_vtime_task_switch()
- Reorganize, clean up and unify most of the higher level
scheduler balancing function names around the sched_balance_*()
prefix
- Simplify the balancing flag code (sched_balance_running)
- Miscellaneous cleanups & fixes
* tag 'sched-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
sched/pelt: Remove shift of thermal clock
sched/cpufreq: Rename arch_update_thermal_pressure() => arch_update_hw_pressure()
thermal/cpufreq: Remove arch_update_thermal_pressure()
sched/cpufreq: Take cpufreq feedback into account
cpufreq: Add a cpufreq pressure feedback for the scheduler
sched/fair: Fix update of rd->sg_overutilized
sched/vtime: Do not include <asm/vtime.h> header
s390/irq,nmi: Include <asm/vtime.h> header directly
s390/vtime: Remove unused __ARCH_HAS_VTIME_TASK_SWITCH leftover
sched/vtime: Get rid of generic vtime_task_switch() implementation
sched/vtime: Remove confusing arch_vtime_task_switch() declaration
sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags
sched/fair: Rename set_rd_overutilized_status() to set_rd_overutilized()
sched/fair: Rename SG_OVERLOAD to SG_OVERLOADED
sched/fair: Rename {set|get}_rd_overload() to {set|get}_rd_overloaded()
sched/fair: Rename root_domain::overload to ::overloaded
sched/fair: Use helper functions to access root_domain::overload
sched/fair: Check root_domain::overload value before update
sched/fair: Combine EAS check with root_domain::overutilized access
sched/fair: Simplify the continue_balancing logic in sched_balance_newidle()
...
Pull perf events updates from Ingo Molnar:
- Combine perf and BPF for fast evalution of HW breakpoint
conditions
- Add LBR capture support outside of hardware events
- Trigger IO signals for watermark_wakeup
- Add RAPL support for Intel Arrow Lake and Lunar Lake
- Optimize frequency-throttling
- Miscellaneous cleanups & fixes
* tag 'perf-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
perf/bpf: Mark perf_event_set_bpf_handler() and perf_event_free_bpf_handler() as inline too
selftests/perf_events: Test FASYNC with watermark wakeups
perf/ring_buffer: Trigger IO signals for watermark_wakeup
perf: Move perf_event_fasync() to perf_event.h
perf/bpf: Change the !CONFIG_BPF_SYSCALL stubs to static inlines
selftest/bpf: Test a perf BPF program that suppresses side effects
perf/bpf: Allow a BPF program to suppress all sample side effects
perf/bpf: Remove unneeded uses_default_overflow_handler()
perf/bpf: Call BPF handler directly, not through overflow machinery
perf/bpf: Remove #ifdef CONFIG_BPF_SYSCALL from struct perf_event members
perf/bpf: Create bpf_overflow_handler() stub for !CONFIG_BPF_SYSCALL
perf/bpf: Reorder bpf_overflow_handler() ahead of __perf_event_overflow()
perf/x86/rapl: Add support for Intel Lunar Lake
perf/x86/rapl: Add support for Intel Arrow Lake
perf/core: Reduce PMU access to adjust sample freq
perf/core: Optimize perf_adjust_freq_unthr_context()
perf/x86/amd: Don't reject non-sampling events with configured LBR
perf/x86/amd: Support capturing LBR from software events
perf/x86/amd: Avoid taking branches before disabling LBR
perf/x86/amd: Ensure amd_pmu_core_disable_all() is always inlined
...
Pull locking updates from Ingo Molnar:
- Over a dozen code generation micro-optimizations for the atomic
and spinlock code
- Add more __ro_after_init attributes
- Robustify the lockdevent_*() macros
* tag 'locking-core-2024-05-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/pvqspinlock/x86: Use _Q_LOCKED_VAL in PV_UNLOCK_ASM macro
locking/qspinlock/x86: Micro-optimize virt_spin_lock()
locking/atomic/x86: Merge __arch{,_try}_cmpxchg64_emu_local() with __arch{,_try}_cmpxchg64_emu()
locking/atomic/x86: Introduce arch_try_cmpxchg64_local()
locking/pvqspinlock/x86: Remove redundant CMP after CMPXCHG in __raw_callee_save___pv_queued_spin_unlock()
locking/pvqspinlock: Use try_cmpxchg() in qspinlock_paravirt.h
locking/pvqspinlock: Use try_cmpxchg_acquire() in trylock_clear_pending()
locking/qspinlock: Use atomic_try_cmpxchg_relaxed() in xchg_tail()
locking/atomic/x86: Define arch_atomic_sub() family using arch_atomic_add() functions
locking/atomic/x86: Rewrite x86_32 arch_atomic64_{,fetch}_{and,or,xor}() functions
locking/atomic/x86: Introduce arch_atomic64_read_nonatomic() to x86_32
locking/atomic/x86: Introduce arch_atomic64_try_cmpxchg() to x86_32
locking/atomic/x86: Introduce arch_try_cmpxchg64() for !CONFIG_X86_CMPXCHG64
locking/atomic/x86: Modernize x86_32 arch_{,try_}_cmpxchg64{,_local}()
locking/atomic/x86: Correct the definition of __arch_try_cmpxchg128()
x86/tsc: Make __use_tsc __ro_after_init
x86/kvm: Make kvm_async_pf_enabled __ro_after_init
context_tracking: Make context_tracking_key __ro_after_init
jump_label,module: Don't alloc static_key_mod for __ro_after_init keys
locking/qspinlock: Always evaluate lockevent* non-event parameter once
Pull crypto updates from Herbert Xu:
"API:
- Remove crypto stats interface
Algorithms:
- Add faster AES-XTS on modern x86_64 CPUs
- Forbid curves with order less than 224 bits in ecc (FIPS 186-5)
- Add ECDSA NIST P521
Drivers:
- Expose otp zone in atmel
- Add dh fallback for primes > 4K in qat
- Add interface for live migration in qat
- Use dma for aes requests in starfive
- Add full DMA support for stm32mpx in stm32
- Add Tegra Security Engine driver
Others:
- Introduce scope-based x509_certificate allocation"
* tag 'v6.10-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (123 commits)
crypto: atmel-sha204a - provide the otp content
crypto: atmel-sha204a - add reading from otp zone
crypto: atmel-i2c - rename read function
crypto: atmel-i2c - add missing arg description
crypto: iaa - Use kmemdup() instead of kzalloc() and memcpy()
crypto: sahara - use 'time_left' variable with wait_for_completion_timeout()
crypto: api - use 'time_left' variable with wait_for_completion_killable_timeout()
crypto: caam - i.MX8ULP donot have CAAM page0 access
crypto: caam - init-clk based on caam-page0-access
crypto: starfive - Use fallback for unaligned dma access
crypto: starfive - Do not free stack buffer
crypto: starfive - Skip unneeded fallback allocation
crypto: starfive - Skip dma setup for zeroed message
crypto: hisilicon/sec2 - fix for register offset
crypto: hisilicon/debugfs - mask the unnecessary info from the dump
crypto: qat - specify firmware files for 402xx
crypto: x86/aes-gcm - simplify GCM hash subkey derivation
crypto: x86/aes-gcm - delete unused GCM assembly code
crypto: x86/aes-xts - simplify loop in xts_crypt_slowpath()
hwrng: stm32 - repair clock handling
...
Pull hardening updates from Kees Cook:
"The bulk of the changes here are related to refactoring and expanding
the KUnit tests for string helper and fortify behavior.
Some trivial strncpy replacements in fs/ were carried in my tree. Also
some fixes to SCSI string handling were carried in my tree since the
helper for those was introduce here. Beyond that, just little fixes
all around: objtool getting confused about LKDTM+KCFI, preparing for
future refactors (constification of sysctl tables, additional
__counted_by annotations), a Clang UBSAN+i386 crash fix, and adding
more options in the hardening.config Kconfig fragment.
Summary:
- selftests: Add str*cmp tests (Ivan Orlov)
- __counted_by: provide UAPI for _le/_be variants (Erick Archer)
- Various strncpy deprecation refactors (Justin Stitt)
- stackleak: Use a copy of soon-to-be-const sysctl table (Thomas
Weißschuh)
- UBSAN: Work around i386 -regparm=3 bug with Clang prior to
version 19
- Provide helper to deal with non-NUL-terminated string copying
- SCSI: Fix older string copying bugs (with new helper)
- selftests: Consolidate string helper behavioral tests
- selftests: add memcpy() fortify tests
- string: Add additional __realloc_size() annotations for "dup"
helpers
- LKDTM: Fix KCFI+rodata+objtool confusion
- hardening.config: Enable KCFI"
* tag 'hardening-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (29 commits)
uapi: stddef.h: Provide UAPI macros for __counted_by_{le, be}
stackleak: Use a copy of the ctl_table argument
string: Add additional __realloc_size() annotations for "dup" helpers
kunit/fortify: Fix replaced failure path to unbreak __alloc_size
hardening: Enable KCFI and some other options
lkdtm: Disable CFI checking for perms functions
kunit/fortify: Add memcpy() tests
kunit/fortify: Do not spam logs with fortify WARNs
kunit/fortify: Rename tests to use recommended conventions
init: replace deprecated strncpy with strscpy_pad
kunit/fortify: Fix mismatched kvalloc()/vfree() usage
scsi: qla2xxx: Avoid possible run-time warning with long model_num
scsi: mpi3mr: Avoid possible run-time warning with long manufacturer strings
scsi: mptfusion: Avoid possible run-time warning with long manufacturer strings
fs: ecryptfs: replace deprecated strncpy with strscpy
hfsplus: refactor copy_name to not use strncpy
reiserfs: replace deprecated strncpy with scnprintf
virt: acrn: replace deprecated strncpy with strscpy
ubsan: Avoid i386 UBSAN handler crashes with Clang
ubsan: Remove 1-element array usage in debug reporting
...
Pull kcsan update from Paul McKenney:
"Introduce __data_racy type qualifier
This adds a __data_racy type qualifier that enables kernel developers
to inform KCSAN that a given variable is a shared variable without
needing to mark each and every access.
This allows pre-KCSAN code to be correctly (if approximately)
instrumented withh very little effort, and also provides people
reading the code a clear indication that the variable is in fact
shared.
In addition, it permits incremental transition to per-access KCSAN
marking, so that (for example) a given subsystem can be transitioned
one variable at a time, while avoiding large numbers of KCSAN warnings
during this transition"
* tag 'kcsan.2024.05.10a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan, compiler_types: Introduce __data_racy type qualifier
Pull RCU updates from Uladzislau Rezki:
- Fix a lockdep complain for lazy-preemptible kernel, remove redundant
BH disable for TINY_RCU, remove redundant READ_ONCE() in tree.c, fix
false positives KCSAN splat and fix buffer overflow in the
print_cpu_stall_info().
- Misc updates related to bpf, tracing and update the MAINTAINERS file.
- An improvement of a normal synchronize_rcu() call in terms of
latency. It maintains a separate track for sync. users only. This
approach bypasses per-cpu nocb-lists thus sync-users do not depend on
nocb-list length and how fast regular callbacks are processed.
- RCU tasks: switch tasks RCU grace periods to sleep at TASK_IDLE
priority, fix some comments, add some diagnostic warning to the
exit_tasks_rcu_start() and fix a buffer overflow in the
show_rcu_tasks_trace_gp_kthread().
- RCU torture: Increase memory to guest OS, fix a Tasks Rude RCU
testing, some updates for TREE09, dump mode information to debug GP
kthread state, remove redundant READ_ONCE(), fix some comments about
RCU_TORTURE_PIPE_LEN and pipe_count, remove some redundant pointer
initialization, fix a hung splat task by when the rcutorture tests
start to exit, fix invalid context warning, add '--do-kvfree'
parameter to torture test and use slow register unregister callbacks
only for rcutype test.
* tag 'rcu.next.v6.10' of https://github.com/urezki/linux: (48 commits)
rcutorture: Use rcu_gp_slow_register/unregister() only for rcutype test
torture: Scale --do-kvfree test time
rcutorture: Fix invalid context warning when enable srcu barrier testing
rcutorture: Make stall-tasks directly exit when rcutorture tests end
rcutorture: Removing redundant function pointer initialization
rcutorture: Make rcutorture support print rcu-tasks gp state
rcutorture: Use the gp_kthread_dbg operation specified by cur_ops
rcutorture: Re-use value stored to ->rtort_pipe_count instead of re-reading
rcutorture: Fix rcu_torture_one_read() pipe_count overflow comment
rcutorture: Remove extraneous rcu_torture_pipe_update_one() READ_ONCE()
rcu: Allocate WQ with WQ_MEM_RECLAIM bit set
rcu: Support direct wake-up of synchronize_rcu() users
rcu: Add a trace event for synchronize_rcu_normal()
rcu: Reduce synchronize_rcu() latency
rcu: Fix buffer overflow in print_cpu_stall_info()
rcu: Mollify sparse with RCU guard
rcu-tasks: Fix show_rcu_tasks_trace_gp_kthread buffer overflow
rcu-tasks: Fix the comments for tasks_rcu_exit_srcu_stall_timer
rcu-tasks: Replace exit_tasks_rcu_start() initialization with WARN_ON_ONCE()
rcu: Remove redundant CONFIG_PROVE_RCU #if condition
...
Based on the discussion at [1], it would be helpful to mark certain
variables as explicitly "data racy", which would result in KCSAN not
reporting data races involving any accesses on such variables. To do
that, introduce the __data_racy type qualifier:
struct foo {
...
int __data_racy bar;
...
};
In KCSAN-kernels, __data_racy turns into volatile, which KCSAN already
treats specially by considering them "marked". In non-KCSAN kernels the
type qualifier turns into no-op.
The generated code between KCSAN-instrumented kernels and non-KCSAN
kernels is already huge (inserted calls into runtime for every memory
access), so the extra generated code (if any) due to volatile for few
such __data_racy variables are unlikely to have measurable impact on
performance.
Link: https://lore.kernel.org/all/CAHk-=wi3iondeh_9V2g3Qz5oHTRjLsOpoy83hb58MVh=nRZe0A@mail.gmail.com/ [1]
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Marco Elver <elver@google.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Pull irq fix from Ingo Molnar:
"Fix suspicious RCU usage in __do_softirq()"
* tag 'irq-urgent-2024-05-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
softirq: Fix suspicious RCU usage in __do_softirq()
Pull probes fix from Masami Hiramatsu:
- probe-events: Fix memory leak in parsing probe argument.
There is a memory leak (forget to free an allocated buffer) in a
memory allocation failure path. Fix it to jump to the correct error
handling code.
* tag 'probes-fixes-v6.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/probes: Fix memory leak in traceprobe_parse_probe_arg_body()
Pull tracing and tracefs fixes from Steven Rostedt:
- Fix RCU callback of freeing an eventfs_inode.
The freeing of the eventfs_inode from the kref going to zero freed
the contents of the eventfs_inode and then used kfree_rcu() to free
the inode itself. But the contents should also be protected by RCU.
Switch to a call_rcu() that calls a function to free all of the
eventfs_inode after the RCU synchronization.
- The tracing subsystem maps its own descriptor to a file represented
by eventfs. The freeing of this descriptor needs to know when the
last reference of an eventfs_inode is released, but currently there
is no interface for that.
Add a "release" callback to the eventfs_inode entry array that allows
for freeing of data that can be referenced by the eventfs_inode being
opened. Then increment the ref counter for this descriptor when the
eventfs_inode file is created, and decrement/free it when the last
reference to the eventfs_inode is released and the file is removed.
This prevents races between freeing the descriptor and the opening of
the eventfs file.
- Fix the permission processing of eventfs.
The change to make the permissions of eventfs default to the mount
point but keep track of when changes were made had a side effect that
could cause security concerns. When the tracefs is remounted with a
given gid or uid, all the files within it should inherit that gid or
uid. But if the admin had changed the permission of some file within
the tracefs file system, it would not get updated by the remount.
This caused the kselftest of file permissions to fail the second time
it is run. The first time, all changes would look fine, but the
second time, because the changes were "saved", the remount did not
reset them.
Create a link list of all existing tracefs inodes, and clear the
saved flags on them on a remount if the remount changes the
corresponding gid or uid fields.
This also simplifies the code by removing the distinction between the
toplevel eventfs and an instance eventfs. They should both act the
same. They were different because of a misconception due to the
remount not resetting the flags. Now that remount resets all the
files and directories to default to the root node if a uid/gid is
specified, it makes the logic simpler to implement.
* tag 'trace-v6.9-rc6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
eventfs: Have "events" directory get permissions from its parent
eventfs: Do not treat events directory different than other directories
eventfs: Do not differentiate the toplevel events directory
tracefs: Still use mount point as default permissions for instances
tracefs: Reset permissions on remount if permissions are options
eventfs: Free all of the eventfs_inode after RCU
eventfs/tracing: Add callback for release of an eventfs_inode
Pull dma-mapping fix from Christoph Hellwig:
- fix the combination of restricted pools and dynamic swiotlb
(Will Deacon)
* tag 'dma-mapping-6.9-2024-05-04' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: initialise restricted pool list_head when SWIOTLB_DYNAMIC=y
Synthetic events create and destroy tracefs files when they are created
and removed. The tracing subsystem has its own file descriptor
representing the state of the events attached to the tracefs files.
There's a race between the eventfs files and this file descriptor of the
tracing system where the following can cause an issue:
With two scripts 'A' and 'B' doing:
Script 'A':
echo "hello int aaa" > /sys/kernel/tracing/synthetic_events
while :
do
echo 0 > /sys/kernel/tracing/events/synthetic/hello/enable
done
Script 'B':
echo > /sys/kernel/tracing/synthetic_events
Script 'A' creates a synthetic event "hello" and then just writes zero
into its enable file.
Script 'B' removes all synthetic events (including the newly created
"hello" event).
What happens is that the opening of the "enable" file has:
{
struct trace_event_file *file = inode->i_private;
int ret;
ret = tracing_check_open_get_tr(file->tr);
[..]
But deleting the events frees the "file" descriptor, and a "use after
free" happens with the dereference at "file->tr".
The file descriptor does have a reference counter, but there needs to be a
way to decrement it from the eventfs when the eventfs_inode is removed
that represents this file descriptor.
Add an optional "release" callback to the eventfs_entry array structure,
that gets called when the eventfs file is about to be removed. This allows
for the creating on the eventfs file to increment the tracing file
descriptor ref counter. When the eventfs file is deleted, it can call the
release function that will call the put function for the tracing file
descriptor.
This will protect the tracing file from being freed while a eventfs file
that references it is being opened.
Link: https://lore.kernel.org/linux-trace-kernel/20240426073410.17154-1-Tze-nan.Wu@mediatek.com/
Link: https://lore.kernel.org/linux-trace-kernel/20240502090315.448cba46@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: 5790b1fb3d ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: Tze-nan wu <Tze-nan.Wu@mediatek.com>
Tested-by: Tze-nan Wu (吳澤南) <Tze-nan.Wu@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bpf.
Relatively calm week, likely due to public holiday in most places. No
known outstanding regressions.
Current release - regressions:
- rxrpc: fix wrong alignmask in __page_frag_alloc_align()
- eth: e1000e: change usleep_range to udelay in PHY mdic access
Previous releases - regressions:
- gro: fix udp bad offset in socket lookup
- bpf: fix incorrect runtime stat for arm64
- tipc: fix UAF in error path
- netfs: fix a potential infinite loop in extract_user_to_sg()
- eth: ice: ensure the copied buf is NUL terminated
- eth: qeth: fix kernel panic after setting hsuid
Previous releases - always broken:
- bpf:
- verifier: prevent userspace memory access
- xdp: use flags field to disambiguate broadcast redirect
- bridge: fix multicast-to-unicast with fraglist GSO
- mptcp: ensure snd_nxt is properly initialized on connect
- nsh: fix outer header access in nsh_gso_segment().
- eth: bcmgenet: fix racing registers access
- eth: vxlan: fix stats counters.
Misc:
- a bunch of MAINTAINERS file updates"
* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
MAINTAINERS: remove Ariel Elior
net: gro: add flush check in udp_gro_receive_segment
net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
ipv4: Fix uninit-value access in __ip_make_skb()
s390/qeth: Fix kernel panic after setting hsuid
vxlan: Pull inner IP header in vxlan_rcv().
tipc: fix a possible memleak in tipc_buf_append
tipc: fix UAF in error path
rxrpc: Clients must accept conn from any address
net: core: reject skb_copy(_expand) for fraglist GSO skbs
net: bridge: fix multicast-to-unicast with fraglist GSO
mptcp: ensure snd_nxt is properly initialized on connect
e1000e: change usleep_range to udelay in PHY mdic access
net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
cxgb4: Properly lock TX queue for the selftest.
rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
vxlan: Add missing VNI filter counter update in arp_reduce().
vxlan: Fix racy device stats updates.
net: qede: use return from qede_parse_actions()
...
Using restricted DMA pools (CONFIG_DMA_RESTRICTED_POOL=y) in conjunction
with dynamic SWIOTLB (CONFIG_SWIOTLB_DYNAMIC=y) leads to the following
crash when initialising the restricted pools at boot-time:
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
| Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
| pc : rmem_swiotlb_device_init+0xfc/0x1ec
| lr : rmem_swiotlb_device_init+0xf0/0x1ec
| Call trace:
| rmem_swiotlb_device_init+0xfc/0x1ec
| of_reserved_mem_device_init_by_idx+0x18c/0x238
| of_dma_configure_id+0x31c/0x33c
| platform_dma_configure+0x34/0x80
faddr2line reveals that the crash is in the list validation code:
include/linux/list.h:83
include/linux/rculist.h:79
include/linux/rculist.h:106
kernel/dma/swiotlb.c:306
kernel/dma/swiotlb.c:1695
because add_mem_pool() is trying to list_add_rcu() to a NULL
'mem->pools'.
Fix the crash by initialising the 'mem->pools' list_head in
rmem_swiotlb_device_init() before calling add_mem_pool().
Reported-by: Nikita Ioffe <ioffe@google.com>
Tested-by: Nikita Ioffe <ioffe@google.com>
Fixes: 1aaa736815 ("swiotlb: allocate a new memory pool when existing pools are full")
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Add some stuff that got missed along the way:
- CONFIG_UNWIND_PATCH_PAC_INTO_SCS=y so SCS vs PAC is hardware
selectable.
- CONFIG_X86_KERNEL_IBT=y while a default, just be sure.
- CONFIG_CFI_CLANG=y globally.
- CONFIG_PAGE_TABLE_CHECK=y for userspace mapping sanity.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20240501193709.make.982-kees@kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Pull workqueue fixes from Tejun Heo:
"Two doc update patches and the following three fixes:
- On single node systems, the default pool is used but the
node_nr_active for the default pool was set to min_active. This
effectively limited the max concurrency of unbound pools on single
node systems to 8 causing performance regressions on some
workloads. Fixed by setting the default pool's node_nr_active to
max_active.
- wq_update_node_max_active() could trigger divide-by-zero if the
intersection between the allowed CPUs for an unbound workqueue and
online CPUs becomes empty.
- When kick_pool() was trying to repatriate a worker to a CPU in its
pod by setting task->wake_cpu, it didn't consider whether the CPU
being selected is online or not which obviously can lead to
subobtimal behaviors. On s390, this triggered a crash in arch code.
The workqueue patch removes the gross misbehavior but doesn't fix
the crash completely as there's a race window in which CPUs can go
down after wake_cpu is set. Need to decide whether the fix should
be on the core or arch side"
* tag 'wq-for-6.9-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Fix divide error in wq_update_node_max_active()
workqueue: The default node_nr_active should have its max set to max_active
workqueue: Fix selection of wake_cpu in kick_pool()
docs/zh_CN: core-api: Update translation of workqueue.rst to 6.9-rc1
Documentation/core-api: Update events_freezable_power references.
Currently, the condition "__this_cpu_read(ksoftirqd) == current" is used to
invoke rcu_softirq_qs() in ksoftirqd tasks context for non-RT kernels.
This works correctly as long as the context is actually task context but
this condition is wrong when:
- the current task is ksoftirqd
- the task is interrupted in a RCU read side critical section
- __do_softirq() is invoked on return from interrupt
Syzkaller triggered the following scenario:
-> finish_task_switch()
-> put_task_struct_rcu_user()
-> call_rcu(&task->rcu, delayed_put_task_struct)
-> __kasan_record_aux_stack()
-> pfn_valid()
-> rcu_read_lock_sched()
<interrupt>
__irq_exit_rcu()
-> __do_softirq)()
-> if (!IS_ENABLED(CONFIG_PREEMPT_RT) &&
__this_cpu_read(ksoftirqd) == current)
-> rcu_softirq_qs()
-> RCU_LOCKDEP_WARN(lock_is_held(&rcu_sched_lock_map))
The rcu quiescent state is reported in the rcu-read critical section, so
the lockdep warning is triggered.
Fix this by splitting out the inner working of __do_softirq() into a helper
function which takes an argument to distinguish between ksoftirqd task
context and interrupted context and invoke it from the relevant call sites
with the proper context information and use that for the conditional
invocation of rcu_softirq_qs().
Reported-by: syzbot+dce04ed6d1438ad69656@syzkaller.appspotmail.com
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20240427102808.29356-1-qiang.zhang1211@gmail.com
Link: https://lore.kernel.org/lkml/8f281a10-b85a-4586-9586-5bbc12dc784f@paulmck-laptop/T/#mea8aba4abfcb97bbf499d169ce7f30c4cff1b0e3
Pull scheduler fixes from Ingo Molnar:
- Fix EEVDF corner cases
- Fix two nohz_full= related bugs that can cause boot crashes
and warnings
* tag 'sched-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/isolation: Fix boot crash when maxcpus < first housekeeping CPU
sched/isolation: Prevent boot crash when the boot CPU is nohz_full
sched/eevdf: Prevent vlag from going out of bounds in reweight_eevdf()
sched/eevdf: Fix miscalculation in reweight_entity() when se is not curr
sched/eevdf: Always update V if se->on_rq when reweighting
Pull x86 fixes from Ingo Molnar:
- Make the CPU_MITIGATIONS=n interaction with conflicting
mitigation-enabling boot parameters a bit saner.
- Re-enable CPU mitigations by default on non-x86
- Fix TDX shared bit propagation on mprotect()
- Fix potential show_regs() system hang when PKE initialization
is not fully finished yet.
- Add the 0x10-0x1f model IDs to the Zen5 range
- Harden #VC instruction emulation some more
* tag 'x86-urgent-2024-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu: Ignore "mitigations" kernel parameter if CPU_MITIGATIONS=n
cpu: Re-enable CPU mitigations by default for !X86 architectures
x86/tdx: Preserve shared bit on mprotect()
x86/cpu: Fix check for RDPKRU in __show_regs()
x86/CPU/AMD: Add models 0x10-0x1f to the Zen5 range
x86/sev: Check for MWAITX and MONITORX opcodes in the #VC handler
housekeeping_setup() checks cpumask_intersects(present, online) to ensure
that the kernel will have at least one housekeeping CPU after smp_init(),
but this doesn't work if the maxcpus= kernel parameter limits the number of
processors available after bootup.
For example, a kernel with "maxcpus=2 nohz_full=0-2" parameters crashes at
boot time on a virtual machine with 4 CPUs.
Change housekeeping_setup() to use cpumask_first_and() and check that the
returned CPU number is valid and less than setup_max_cpus.
Another corner case is "nohz_full=0" on a machine with a single CPU or with
the maxcpus=1 kernel argument. In this case non_housekeeping_mask is empty
and tick_nohz_full_setup() makes no sense. And indeed, the kernel hits the
WARN_ON(tick_nohz_full_running) in tick_sched_do_timer().
And how should the kernel interpret the "nohz_full=" parameter? It should
be silently ignored, but currently cpulist_parse() happily returns the
empty cpumask and this leads to the same problem.
Change housekeeping_setup() to check cpumask_empty(non_housekeeping_mask)
and do nothing in this case.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240413141746.GA10008@redhat.com
Documentation/timers/no_hz.rst states that the "nohz_full=" mask must not
include the boot CPU, which is no longer true after:
08ae95f4fd ("nohz_full: Allow the boot CPU to be nohz_full").
However after:
aae17ebb53 ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
the kernel will crash at boot time in this case; housekeeping_any_cpu()
returns an invalid CPU number until smp_init() brings the first
housekeeping CPU up.
Change housekeeping_any_cpu() to check the result of cpumask_any_and() and
return smp_processor_id() in this case.
This is just the simple and backportable workaround which fixes the
symptom, but smp_processor_id() at boot time should be safe at least for
type == HK_TYPE_TIMER, this more or less matches the tick_do_timer_boot_cpu
logic.
There is no worry about cpu_down(); tick_nohz_cpu_down() will not allow to
offline tick_do_timer_cpu (the 1st online housekeeping CPU).
Fixes: aae17ebb53 ("workqueue: Avoid using isolated cpus' timers on queue_delayed_work")
Reported-by: Chris von Recklinghausen <crecklin@redhat.com>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20240411143905.GA19288@redhat.com
Closes: https://lore.kernel.org/all/20240402105847.GA24832@redhat.com/
Daniel Borkmann says:
====================
pull-request: bpf 2024-04-26
We've added 12 non-merge commits during the last 22 day(s) which contain
a total of 14 files changed, 168 insertions(+), 72 deletions(-).
The main changes are:
1) Fix BPF_PROBE_MEM in verifier and JIT to skip loads from vsyscall page,
from Puranjay Mohan.
2) Fix a crash in XDP with devmap broadcast redirect when the latter map
is in process of being torn down, from Toke Høiland-Jørgensen.
3) Fix arm64 and riscv64 BPF JITs to properly clear start time for BPF
program runtime stats, from Xu Kuohai.
4) Fix a sockmap KCSAN-reported data race in sk_psock_skb_ingress_enqueue,
from Jason Xing.
5) Fix BPF verifier error message in resolve_pseudo_ldimm64,
from Anton Protopopov.
6) Fix missing DEBUG_INFO_BTF_MODULES Kconfig menu item,
from Andrii Nakryiko.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test PROBE_MEM of VSYSCALL_ADDR on x86-64
bpf, x86: Fix PROBE_MEM runtime load check
bpf: verifier: prevent userspace memory access
xdp: use flags field to disambiguate broadcast redirect
arm32, bpf: Reimplement sign-extension mov instruction
riscv, bpf: Fix incorrect runtime stats
bpf, arm64: Fix incorrect runtime stats
bpf: Fix a verifier verbose message
bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue
MAINTAINERS: bpf: Add Lehui and Puranjay as riscv64 reviewers
MAINTAINERS: Update email address for Puranjay Mohan
bpf, kconfig: Fix DEBUG_INFO_BTF_MODULES Kconfig definition
====================
Link: https://lore.kernel.org/r/20240426224248.26197-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull misc fixes from Andrew Morton:
"11 hotfixes. 8 are cc:stable and the remaining 3 (nice ratio!) address
post-6.8 issues or aren't considered suitable for backporting.
All except one of these are for MM. I see no particular theme - it's
singletons all over"
* tag 'mm-hotfixes-stable-2024-04-26-13-30' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/hugetlb: fix DEBUG_LOCKS_WARN_ON(1) when dissolve_free_hugetlb_folio()
selftests: mm: protection_keys: save/restore nr_hugepages value from launch script
stackdepot: respect __GFP_NOLOCKDEP allocation flag
hugetlb: check for anon_vma prior to folio allocation
mm: zswap: fix shrinker NULL crash with cgroup_disable=memory
mm: turn folio_test_hugetlb into a PageType
mm: support page_mapcount() on page_has_type() pages
mm: create FOLIO_FLAG_FALSE and FOLIO_TYPE_OPS macros
mm/hugetlb: fix missing hugetlb_lock for resv uncharge
selftests: mm: fix unused and uninitialized variable warning
selftests/harness: remove use of LINE_MAX
Explicitly disallow enabling mitigations at runtime for kernels that were
built with CONFIG_CPU_MITIGATIONS=n, as some architectures may omit code
entirely if mitigations are disabled at compile time.
E.g. on x86, a large pile of Kconfigs are buried behind CPU_MITIGATIONS,
and trying to provide sane behavior for retroactively enabling mitigations
is extremely difficult, bordering on impossible. E.g. page table isolation
and call depth tracking require build-time support, BHI mitigations will
still be off without additional kernel parameters, etc.
[ bp: Touchups. ]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240420000556.2645001-3-seanjc@google.com
Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it
on for all architectures exception x86. A recent commit to turn
mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta
missed that "cpu_mitigations" is completely generic, whereas
SPECULATION_MITIGATIONS is x86-specific.
Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it
select CPU_MITIGATIONS, as having two configs for the same thing is
unnecessary and confusing. This will also allow x86 to use the knob to
manage mitigations that aren't strictly related to speculative
execution.
Use another Kconfig to communicate to common code that CPU_MITIGATIONS
is already defined instead of having x86's menu depend on the common
CPU_MITIGATIONS. This allows keeping a single point of contact for all
of x86's mitigations, and it's not clear that other architectures *want*
to allow disabling mitigations at compile-time.
Fixes: f337a6a21e ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n")
Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240420000556.2645001-2-seanjc@google.com
The current folio_test_hugetlb() can be fooled by a concurrent folio split
into returning true for a folio which has never belonged to hugetlbfs.
This can't happen if the caller holds a refcount on it, but we have a few
places (memory-failure, compaction, procfs) which do not and should not
take a speculative reference.
Since hugetlb pages do not use individual page mapcounts (they are always
fully mapped and use the entire_mapcount field to record the number of
mappings), the PageType field is available now that page_mapcount()
ignores the value in this field.
In compaction and with CONFIG_DEBUG_VM enabled, the current implementation
can result in an oops, as reported by Luis. This happens since 9c5ccf2db0
("mm: remove HUGETLB_PAGE_DTOR") effectively added some VM_BUG_ON() checks
in the PageHuge() testing path.
[willy@infradead.org: update vmcoreinfo]
Link: https://lkml.kernel.org/r/ZgGZUvsdhaT1Va-T@casper.infradead.org
Link: https://lkml.kernel.org/r/20240321142448.1645400-6-willy@infradead.org
Fixes: 9c5ccf2db0 ("mm: remove HUGETLB_PAGE_DTOR")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: David Hildenbrand <david@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Luis Chamberlain <mcgrof@kernel.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218227
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now that cpufreq provides a pressure value to the scheduler, rename
arch_update_thermal_pressure into HW pressure to reflect that it returns
a pressure applied by HW (i.e. with a high frequency change) and not
always related to thermal mitigation but also generated by max current
limitation as an example. Such high frequency signal needs filtering to be
smoothed and provide an value that reflects the average available capacity
into the scheduler time scale.
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Lukasz Luba <lukasz.luba@arm.com>
Reviewed-by: Qais Yousef <qyousef@layalina.io>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://lore.kernel.org/r/20240326091616.3696851-5-vincent.guittot@linaro.org
The default nna (node_nr_active) is used when the pool isn't tied to a
specific NUMA node. This can happen in the following cases:
1. On NUMA, if per-node pwq init failure and the fallback pwq is used.
2. On NUMA, if a pool is configured to span multiple nodes.
3. On single node setups.
5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for
unbound workqueues") set the default nna->max to min_active because only #1
was being considered. For #2 and #3, using min_active means that the max
concurrency in normal operation is pushed down to min_active which is
currently 8, which can obviously lead to performance issues.
exact value nna->max is set to doesn't really matter. #2 can only happen if
the workqueue is intentionally configured to ignore NUMA boundaries and
there's no good way to distribute max_active in this case. #3 is the default
behavior on single node machines.
Let's set it the default nna->max to max_active. This fixes the artificially
lowered concurrency problem on single node machines and shouldn't hurt
anything for other cases.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Fixes: 5797b1c189 ("workqueue: Implement system-wide nr_active enforcement for unbound workqueues")
Link: https://lore.kernel.org/dm-devel/20240410084531.2134621-1-shinichiro.kawasaki@wdc.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
With cpu_possible_mask=0-63 and cpu_online_mask=0-7 the following
kernel oops was observed:
smp: Bringing up secondary CPUs ...
smp: Brought up 1 node, 8 CPUs
Unable to handle kernel pointer dereference in virtual kernel address space
Failing address: 0000000000000000 TEID: 0000000000000803
[..]
Call Trace:
arch_vcpu_is_preempted+0x12/0x80
select_idle_sibling+0x42/0x560
select_task_rq_fair+0x29a/0x3b0
try_to_wake_up+0x38e/0x6e0
kick_pool+0xa4/0x198
__queue_work.part.0+0x2bc/0x3a8
call_timer_fn+0x36/0x160
__run_timers+0x1e2/0x328
__run_timer_base+0x5a/0x88
run_timer_softirq+0x40/0x78
__do_softirq+0x118/0x388
irq_exit_rcu+0xc0/0xd8
do_ext_irq+0xae/0x168
ext_int_handler+0xbe/0xf0
psw_idle_exit+0x0/0xc
default_idle_call+0x3c/0x110
do_idle+0xd4/0x158
cpu_startup_entry+0x40/0x48
rest_init+0xc6/0xc8
start_kernel+0x3c4/0x5e0
startup_continue+0x3c/0x50
The crash is caused by calling arch_vcpu_is_preempted() for an offline
CPU. To avoid this, select the cpu with cpumask_any_and_distribute()
to mask __pod_cpumask with cpu_online_mask. In case no cpu is left in
the pool, skip the assignment.
tj: This doesn't fully fix the bug as CPUs can still go down between picking
the target CPU and the wake call. Fixing that likely requires adding
cpu_online() test to either the sched or s390 arch code. However, regardless
of how that is fixed, workqueue shouldn't be picking a CPU which isn't
online as that would result in unpredictable and worse behavior.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Fixes: 8639ecebc9 ("workqueue: Implement non-strict affinity scope for unbound workqueues")
Cc: stable@vger.kernel.org # v6.6+
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull scheduler fix from Borislav Petkov:
- Add a missing memory barrier in the concurrency ID mm switching
* tag 'sched_urgent_for_v6.9_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Add missing memory barrier in switch_mm_cid
The generic vtime_task_switch() implementation gets built only
if __ARCH_HAS_VTIME_TASK_SWITCH is not defined, but requires an
architecture to implement arch_vtime_task_switch() callback at
the same time, which is confusing.
Further, arch_vtime_task_switch() is implemented for 32-bit PowerPC
architecture only and vtime_task_switch() generic variant is rather
superfluous.
Simplify the whole vtime_task_switch() wiring by moving the existing
generic implementation to PowerPC.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/2cb6e3caada93623f6d4f78ad938ac6cd0e2fda8.1712760275.git.agordeev@linux.ibm.com
