commit efa95b01da ("netpoll: fix use after free") incorrectly
ignored the refcount and prematurely set dev->npinfo to NULL during
netpoll cleanup, leading to improper behavior and memory leaks.
Scenario causing lack of proper cleanup:
1) A netpoll is associated with a NIC (e.g., eth0) and netdev->npinfo is
allocated, and refcnt = 1
- Keep in mind that npinfo is shared among all netpoll instances. In
this case, there is just one.
2) Another netpoll is also associated with the same NIC and
npinfo->refcnt += 1.
- Now dev->npinfo->refcnt = 2;
- There is just one npinfo associated to the netdev.
3) When the first netpolls goes to clean up:
- The first cleanup succeeds and clears np->dev->npinfo, ignoring
refcnt.
- It basically calls `RCU_INIT_POINTER(np->dev->npinfo, NULL);`
- Set dev->npinfo = NULL, without proper cleanup
- No ->ndo_netpoll_cleanup() is either called
4) Now the second target tries to clean up
- The second cleanup fails because np->dev->npinfo is already NULL.
* In this case, ops->ndo_netpoll_cleanup() was never called, and
the skb pool is not cleaned as well (for the second netpoll
instance)
- This leaks npinfo and skbpool skbs, which is clearly reported by
kmemleak.
Revert commit efa95b01da ("netpoll: fix use after free") and adds
clarifying comments emphasizing that npinfo cleanup should only happen
once the refcount reaches zero, ensuring stable and correct netpoll
behavior.
Cc: <stable@vger.kernel.org> # 3.17.x
Cc: Jay Vosburgh <jv@jvosburgh.net>
Fixes: efa95b01da ("netpoll: fix use after free")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251107-netconsole_torture-v10-1-749227b55f63@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
One GRO-cell device's NAPI callback can nest into the GRO-cell of
another device if the underlying device is also using GRO-cell.
This is the case for IPsec over vxlan.
These two GRO-cells are separate devices. From lockdep's point of view
it is the same because each device is sharing the same lock class and so
it reports a possible deadlock assuming one device is nesting into
itself.
Hold the bh_lock only while accessing gro_cell::napi_skbs in
gro_cell_poll(). This reduces the locking scope and avoids acquiring the
same lock class multiple times.
Fixes: 25718fdcbd ("net: gro_cells: Use nested-BH locking for gro_cell")
Reported-by: Gal Pressman <gal@nvidia.com>
Closes: https://lore.kernel.org/all/66664116-edb8-48dc-ad72-d5223696dd19@nvidia.com/
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20251104153435.ty88xDQt@linutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a AA deadlock in refill_skbs() where memory allocation while holding
skb_pool->lock can trigger a recursive lock acquisition attempt.
The deadlock scenario occurs when the system is under severe memory
pressure:
1. refill_skbs() acquires skb_pool->lock (spinlock)
2. alloc_skb() is called while holding the lock
3. Memory allocator fails and calls slab_out_of_memory()
4. This triggers printk() for the OOM warning
5. The console output path calls netpoll_send_udp()
6. netpoll_send_udp() attempts to acquire the same skb_pool->lock
7. Deadlock: the lock is already held by the same CPU
Call stack:
refill_skbs()
spin_lock_irqsave(&skb_pool->lock) <- lock acquired
__alloc_skb()
kmem_cache_alloc_node_noprof()
slab_out_of_memory()
printk()
console_flush_all()
netpoll_send_udp()
skb_dequeue()
spin_lock_irqsave(&skb_pool->lock) <- deadlock attempt
This bug was exposed by commit 248f6571fd ("netpoll: Optimize skb
refilling on critical path") which removed refill_skbs() from the
critical path (where nested printk was being deferred), letting nested
printk being called from inside refill_skbs()
Refactor refill_skbs() to never allocate memory while holding
the spinlock.
Another possible solution to fix this problem is protecting the
refill_skbs() from nested printks, basically calling
printk_deferred_{enter,exit}() in refill_skbs(), then, any nested
pr_warn() would be deferred.
I prefer this approach, given I _think_ it might be a good idea to move
the alloc_skb() from GFP_ATOMIC to GFP_KERNEL in the future, so, having
the alloc_skb() outside of the lock will be necessary step.
There is a possible TOCTOU issue when checking for the pool length, and
queueing the new allocated skb, but, this is not an issue, given that
an extra SKB in the pool is harmless and it will be eventually used.
Signed-off-by: Breno Leitao <leitao@debian.org>
Fixes: 248f6571fd ("netpoll: Optimize skb refilling on critical path")
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251103-fix_netpoll_aa-v4-1-4cfecdf6da7c@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
The zero-copy Device Memory (Devmem) transmit path
relies on the socket's route cache (`dst_entry`) to
validate that the packet is being sent via the network
device to which the DMA buffer was bound.
However, this check incorrectly fails and returns `-ENODEV`
if the socket's route cache entry (`dst`) is merely missing
or expired (`dst == NULL`). This scenario is observed during
network events, such as when flow steering rules are deleted,
leading to a temporary route cache invalidation.
This patch fixes -ENODEV error for `net_devmem_get_binding()`
by doing the following:
1. It attempts to rebuild the route via `rebuild_header()`
if the route is initially missing (`dst == NULL`). This
allows the TCP/IP stack to recover from transient route
cache misses.
2. It uses `rcu_read_lock()` and `dst_dev_rcu()` to safely
access the network device pointer (`dst_dev`) from the
route, preventing use-after-free conditions if the
device is concurrently removed.
3. It maintains the critical safety check by validating
that the retrieved destination device (`dst_dev`) is
exactly the device registered in the Devmem binding
(`binding->dev`).
These changes prevent unnecessary ENODEV failures while
maintaining the critical safety requirement that the
Devmem resources are only used on the bound network device.
Reviewed-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Reported-by: Vedant Mathur <vedantmathur@google.com>
Suggested-by: Eric Dumazet <edumazet@google.com>
Fixes: bd61848900 ("net: devmem: Implement TX path")
Signed-off-by: Shivaji Kant <shivajikant@google.com>
Link: https://patch.msgid.link/20251029065420.3489943-1-shivajikant@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yinhao et al. recently reported:
Our fuzzing tool was able to create a BPF program which triggered
the below BUG condition inside pskb_expand_head.
[ 23.016047][T10006] kernel BUG at net/core/skbuff.c:2232!
[...]
[ 23.017301][T10006] RIP: 0010:pskb_expand_head+0x1519/0x1530
[...]
[ 23.021249][T10006] Call Trace:
[ 23.021387][T10006] <TASK>
[ 23.021507][T10006] ? __pfx_pskb_expand_head+0x10/0x10
[ 23.021725][T10006] __bpf_skb_change_head+0x22a/0x520
[ 23.021939][T10006] bpf_skb_change_head+0x34/0x1b0
[ 23.022143][T10006] ___bpf_prog_run+0xf70/0xb670
[ 23.022342][T10006] __bpf_prog_run32+0xed/0x140
[...]
The problem is that in __bpf_skb_change_head() we need to reject a
negative head_room as otherwise this propagates all the way to the
pskb_expand_head() from skb_cow(). For example, if the BPF test infra
passes a skb with gso_skb:1 to the BPF helper with a negative head_room
of -22, then this gets passed into skb_cow(). __skb_cow() in this
example calculates a delta of -86 which gets aligned to -64, and then
triggers BUG_ON(nhead < 0). Thus, reject malformed negative input.
Fixes: 3a0af8fd61 ("bpf: BPF for lightweight tunnel infrastructure")
Reported-by: Yinhao Hu <dddddd@hust.edu.cn>
Reported-by: Kaiyan Mei <M202472210@hust.edu.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Link: https://patch.msgid.link/20251023125532.182262-1-daniel@iogearbox.net
Some protocols using TCP encapsulation (e.g., espintcp, openvpn) deliver
userspace-bound packets through a custom skb queue rather than the
standard sk_receive_queue.
Introduce datagram_poll_queue that accepts an explicit receive queue,
and convert datagram_poll into a wrapper around datagram_poll_queue.
This allows protocols with custom skb queues to reuse the core polling
logic without relying on sk_receive_queue.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: Antonio Quartulli <antonio@openvpn.net>
Signed-off-by: Ralf Lici <ralf@mandelbit.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Antonio Quartulli <antonio@openvpn.net>
Link: https://patch.msgid.link/20251021100942.195010-2-ralf@mandelbit.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
syzbot found that the local_unlock_nested_bh() call was
missing in some cases.
WARNING: possible recursive locking detected
syzkaller #0 Not tainted
--------------------------------------------
syz.2.329/7421 is trying to acquire lock:
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:44 [inline]
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: gro_cells_receive+0x404/0x790 net/core/gro_cells.c:30
but task is already holding lock:
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:44 [inline]
ffffe8ffffd48888 ((&cell->bh_lock)){+...}-{3:3}, at: gro_cells_receive+0x404/0x790 net/core/gro_cells.c:30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock((&cell->bh_lock));
lock((&cell->bh_lock));
*** DEADLOCK ***
Given the introduction of @have_bh_lock variable, it seems the author
intent was to have the local_unlock_nested_bh() after the @unlock label.
Fixes: 25718fdcbd ("net: gro_cells: Use nested-BH locking for gro_cell")
Reported-by: syzbot+f9651b9a8212e1c8906f@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/68f65eb9.a70a0220.205af.0034.GAE@google.com/T/#u
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20251020161114.1891141-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Creating FDB entries is possible from a non-initial user namespace when
having CAP_NET_ADMIN, yet, when deleting FDB entries, processes receive
an EPERM because the capability is always checked against the initial
user namespace. This restricts the FDB management from unprivileged
containers.
Drop the netlink_capable check in rtnl_fdb_del as it was originally
dropped in c5c351088a and reintroduced in 1690be63a2 without
intention.
This patch was tested using a container on GyroidOS, where it was
possible to delete FDB entries from an unprivileged user namespace and
private network namespace.
Fixes: 1690be63a2 ("bridge: Add vlan support to static neighbors")
Reviewed-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Tested-by: Harshal Gohel <hg@simonwunderlich.de>
Signed-off-by: Johannes Wiesböck <johannes.wiesboeck@aisec.fraunhofer.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251015201548.319871-1-johannes.wiesboeck@aisec.fraunhofer.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some network drivers assume this field is zero after napi_get_frags().
We must clear it in napi_reuse_skb() otherwise the following can happen:
1) A packet is received, and skb_shinfo(skb)->hwtstamps is populated
because a bit in the receive descriptor announced hwtstamp
availability for this packet.
2) Packet is given to gro layer via napi_gro_frags().
3) Packet is merged to a prior one held in GRO queues.
4) skb is saved after some cleanup in napi->skb via a call
to napi_reuse_skb().
5) Next packet is received 10 seconds later, gets the recycled skb
from napi_get_frags().
6) The receive descriptor does not announce hwtstamp availability.
Driver does not clear shinfo->hwtstamps.
7) We have in shinfo->hwtstamps an old timestamp.
Fixes: ac45f602ee ("net: infrastructure for hardware time stamping")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://patch.msgid.link/20251015063221.4171986-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from CAN
Current release - regressions:
- udp: do not use skb_release_head_state() before
skb_attempt_defer_free()
- gro_cells: use nested-BH locking for gro_cell
- dpll: zl3073x: increase maximum size of flash utility
Previous releases - regressions:
- core: fix lockdep splat on device unregister
- tcp: fix tcp_tso_should_defer() vs large RTT
- tls:
- don't rely on tx_work during send()
- wait for pending async decryptions if tls_strp_msg_hold fails
- can: j1939: add missing calls in NETDEV_UNREGISTER notification
handler
- eth: lan78xx: fix lost EEPROM write timeout in
lan78xx_write_raw_eeprom
Previous releases - always broken:
- ip6_tunnel: prevent perpetual tunnel growth
- dpll: zl3073x: handle missing or corrupted flash configuration
- can: m_can: fix pm_runtime and CAN state handling
- eth:
- ixgbe: fix too early devlink_free() in ixgbe_remove()
- ixgbevf: fix mailbox API compatibility
- gve: Check valid ts bit on RX descriptor before hw timestamping
- idpf: cleanup remaining SKBs in PTP flows
- r8169: fix packet truncation after S4 resume on RTL8168H/RTL8111H"
* tag 'net-6.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
udp: do not use skb_release_head_state() before skb_attempt_defer_free()
net: usb: lan78xx: fix use of improperly initialized dev->chipid in lan78xx_reset
netdevsim: set the carrier when the device goes up
selftests: tls: add test for short splice due to full skmsg
selftests: net: tls: add tests for cmsg vs MSG_MORE
tls: don't rely on tx_work during send()
tls: wait for pending async decryptions if tls_strp_msg_hold fails
tls: always set record_type in tls_process_cmsg
tls: wait for async encrypt in case of error during latter iterations of sendmsg
tls: trim encrypted message to match the plaintext on short splice
tg3: prevent use of uninitialized remote_adv and local_adv variables
MAINTAINERS: new entry for IPv6 IOAM
gve: Check valid ts bit on RX descriptor before hw timestamping
net: core: fix lockdep splat on device unregister
MAINTAINERS: add myself as maintainer for b53
selftests: net: check jq command is supported
net: airoha: Take into account out-of-order tx completions in airoha_dev_xmit()
tcp: fix tcp_tso_should_defer() vs large RTT
r8152: add error handling in rtl8152_driver_init
usbnet: Fix using smp_processor_id() in preemptible code warnings
...
Since blamed commit, unregister_netdevice_many_notify() takes the netdev
mutex if the device needs it.
If the device list is too long, this will lock more device mutexes than
lockdep can handle:
unshare -n \
bash -c 'for i in $(seq 1 100);do ip link add foo$i type dummy;done'
BUG: MAX_LOCK_DEPTH too low!
turning off the locking correctness validator.
depth: 48 max: 48!
48 locks held by kworker/u16:1/69:
#0: ..148 ((wq_completion)netns){+.+.}-{0:0}, at: process_one_work
#1: ..d40 (net_cleanup_work){+.+.}-{0:0}, at: process_one_work
#2: ..bd0 (pernet_ops_rwsem){++++}-{4:4}, at: cleanup_net
#3: ..aa8 (rtnl_mutex){+.+.}-{4:4}, at: default_device_exit_batch
#4: ..cb0 (&dev_instance_lock_key#3){+.+.}-{4:4}, at: unregister_netdevice_many_notify
[..]
Add a helper to close and then unlock a list of net_devices.
Devices that are not up have to be skipped - netif_close_many always
removes them from the list without any other actions taken, so they'd
remain in locked state.
Close devices whenever we've used up half of the tracking slots or we
processed entire list without hitting the limit.
Fixes: 7e4d784f58 ("net: hold netdev instance lock during rtnetlink operations")
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://patch.msgid.link/20251013185052.14021-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cilium has a BPF egress gateway feature which forces outgoing K8s Pod
traffic to pass through dedicated egress gateways which then SNAT the
traffic in order to interact with stable IPs outside the cluster.
The traffic is directed to the gateway via vxlan tunnel in collect md
mode. A recent BPF change utilized the bpf_redirect_neigh() helper to
forward packets after the arrival and decap on vxlan, which turned out
over time that the kmalloc-256 slab usage in kernel was ever-increasing.
The issue was that vxlan allocates the metadata_dst object and attaches
it through a fake dst entry to the skb. The latter was never released
though given bpf_redirect_neigh() was merely setting the new dst entry
via skb_dst_set() without dropping an existing one first.
Fixes: b4ab314149 ("bpf: Add redirect_neigh helper as redirect drop-in")
Reported-by: Yusuke Suzuki <yusuke.suzuki@isovalent.com>
Reported-by: Julian Wiedmann <jwi@isovalent.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jordan Rife <jrife@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jordan Rife <jrife@google.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20251003073418.291171-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Helge reported that the introduction of PP_MAGIC_MASK let to crashes on
boot on his 32-bit parisc machine. The cause of this is the mask is set
too wide, so the page_pool_page_is_pp() incurs false positives which
crashes the machine.
Just disabling the check in page_pool_is_pp() will lead to the page_pool
code itself malfunctioning; so instead of doing this, this patch changes
the define for PP_DMA_INDEX_BITS to avoid mistaking arbitrary kernel
pointers for page_pool-tagged pages.
The fix relies on the kernel pointers that alias with the pp_magic field
always being above PAGE_OFFSET. With this assumption, we can use the
lowest bit of the value of PAGE_OFFSET as the upper bound of the
PP_DMA_INDEX_MASK, which should avoid the false positives.
Because we cannot rely on PAGE_OFFSET always being a compile-time
constant, nor on it always being >0, we fall back to disabling the
dma_index storage when there are not enough bits available. This leaves
us in the situation we were in before the patch in the Fixes tag, but
only on a subset of architecture configurations. This seems to be the
best we can do until the transition to page types in complete for
page_pool pages.
v2:
- Make sure there's at least 8 bits available and that the PAGE_OFFSET
bit calculation doesn't wrap
Link: https://lore.kernel.org/all/aMNJMFa5fDalFmtn@p100/
Fixes: ee62ce7a1d ("page_pool: Track DMA-mapped pages and unmap them when destroying the pool")
Cc: stable@vger.kernel.org # 6.15+
Tested-by: Helge Deller <deller@gmx.de>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Tested-by: Helge Deller <deller@gmx.de>
Link: https://patch.msgid.link/20250930114331.675412-1-toke@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking updates from Paolo Abeni:
"Core & protocols:
- Improve drop account scalability on NUMA hosts for RAW and UDP
sockets and the backlog, almost doubling the Pps capacity under DoS
- Optimize the UDP RX performance under stress, reducing contention,
revisiting the binary layout of the involved data structs and
implementing NUMA-aware locking. This improves UDP RX performance
by an additional 50%, even more under extreme conditions
- Add support for PSP encryption of TCP connections; this mechanism
has some similarities with IPsec and TLS, but offers superior HW
offloads capabilities
- Ongoing work to support Accurate ECN for TCP. AccECN allows more
than one congestion notification signal per RTT and is a building
block for Low Latency, Low Loss, and Scalable Throughput (L4S)
- Reorganize the TCP socket binary layout for data locality, reducing
the number of touched cachelines in the fastpath
- Refactor skb deferral free to better scale on large multi-NUMA
hosts, this improves TCP and UDP RX performances significantly on
such HW
- Increase the default socket memory buffer limits from 256K to 4M to
better fit modern link speeds
- Improve handling of setups with a large number of nexthop, making
dump operating scaling linearly and avoiding unneeded
synchronize_rcu() on delete
- Improve bridge handling of VLAN FDB, storing a single entry per
bridge instead of one entry per port; this makes the dump order of
magnitude faster on large switches
- Restore IP ID correctly for encapsulated packets at GSO
segmentation time, allowing GRO to merge packets in more scenarios
- Improve netfilter matching performance on large sets
- Improve MPTCP receive path performance by leveraging recently
introduced core infrastructure (skb deferral free) and adopting
recent TCP autotuning changes
- Allow bridges to redirect to a backup port when the bridge port is
administratively down
- Introduce MPTCP 'laminar' endpoint that con be used only once per
connection and simplify common MPTCP setups
- Add RCU safety to dst->dev, closing a lot of possible races
- A significant crypto library API for SCTP, MPTCP and IPv6 SR,
reducing code duplication
- Supports pulling data from an skb frag into the linear area of an
XDP buffer
Things we sprinkled into general kernel code:
- Generate netlink documentation from YAML using an integrated YAML
parser
Driver API:
- Support using IPv6 Flow Label in Rx hash computation and RSS queue
selection
- Introduce API for fetching the DMA device for a given queue,
allowing TCP zerocopy RX on more H/W setups
- Make XDP helpers compatible with unreadable memory, allowing more
easily building DevMem-enabled drivers with a unified XDP/skbs
datapath
- Add a new dedicated ethtool callback enabling drivers to provide
the number of RX rings directly, improving efficiency and clarity
in RX ring queries and RSS configuration
- Introduce a burst period for the health reporter, allowing better
handling of multiple errors due to the same root cause
- Support for DPLL phase offset exponential moving average,
controlling the average smoothing factor
Device drivers:
- Add a new Huawei driver for 3rd gen NIC (hinic3)
- Add a new SpacemiT driver for K1 ethernet MAC
- Add a generic abstraction for shared memory communication
devices (dibps)
- Ethernet high-speed NICs:
- nVidia/Mellanox:
- Use multiple per-queue doorbell, to avoid MMIO contention
issues
- support adjacent functions, allowing them to delegate their
SR-IOV VFs to sibling PFs
- support RSS for IPSec offload
- support exposing raw cycle counters in PTP and mlx5
- support for disabling host PFs.
- Intel (100G, ice, idpf):
- ice: support for SRIOV VFs over an Active-Active link
aggregate
- ice: support for firmware logging via debugfs
- ice: support for Earliest TxTime First (ETF) hardware offload
- idpf: support basic XDP functionalities and XSk
- Broadcom (bnxt):
- support Hyper-V VF ID
- dynamic SRIOV resource allocations for RoCE
- Meta (fbnic):
- support queue API, zero-copy Rx and Tx
- support basic XDP functionalities
- devlink health support for FW crashes and OTP mem corruptions
- expand hardware stats coverage to FEC, PHY, and Pause
- Wangxun:
- support ethtool coalesce options
- support for multiple RSS contexts
- Ethernet virtual:
- Macsec:
- replace custom netlink attribute checks with policy-level
checks
- Bonding:
- support aggregator selection based on port priority
- Microsoft vNIC:
- use page pool fragments for RX buffers instead of full pages
to improve memory efficiency
- Ethernet NICs consumer, and embedded:
- Qualcomm: support Ethernet function for IPQ9574 SoC
- Airoha: implement wlan offloading via NPU
- Freescale
- enetc: add NETC timer PTP driver and add PTP support
- fec: enable the Jumbo frame support for i.MX8QM
- Renesas (R-Car S4):
- support HW offloading for layer 2 switching
- support for RZ/{T2H, N2H} SoCs
- Cadence (macb): support TAPRIO traffic scheduling
- TI:
- support for Gigabit ICSS ethernet SoC (icssm-prueth)
- Synopsys (stmmac): a lot of cleanups
- Ethernet PHYs:
- Support 10g-qxgmi phy-mode for AQR412C, Felix DSA and Lynx PCS
driver
- Support bcm63268 GPHY power control
- Support for Micrel lan8842 PHY and PTP
- Support for Aquantia AQR412 and AQR115
- CAN:
- a large CAN-XL preparation work
- reorganize raw_sock and uniqframe struct to minimize memory
usage
- rcar_canfd: update the CAN-FD handling
- WiFi:
- extended Neighbor Awareness Networking (NAN) support
- S1G channel representation cleanup
- improve S1G support
- WiFi drivers:
- Intel (iwlwifi):
- major refactor and cleanup
- Broadcom (brcm80211):
- support for AP isolation
- RealTek (rtw88/89) rtw88/89:
- preparation work for RTL8922DE support
- MediaTek (mt76):
- HW restart improvements
- MLO support
- Qualcomm/Atheros (ath10k):
- GTK rekey fixes
- Bluetooth drivers:
- btusb: support for several new IDs for MT7925
- btintel: support for BlazarIW core
- btintel_pcie: support for _suspend() / _resume()
- btintel_pcie: support for Scorpious, Panther Lake-H484 IDs"
* tag 'net-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1536 commits)
net: stmmac: Add support for Allwinner A523 GMAC200
dt-bindings: net: sun8i-emac: Add A523 GMAC200 compatible
Revert "Documentation: net: add flow control guide and document ethtool API"
octeontx2-pf: fix bitmap leak
octeontx2-vf: fix bitmap leak
net/mlx5e: Use extack in set rxfh callback
net/mlx5e: Introduce mlx5e_rss_params for RSS configuration
net/mlx5e: Introduce mlx5e_rss_init_params
net/mlx5e: Remove unused mdev param from RSS indir init
net/mlx5: Improve QoS error messages with actual depth values
net/mlx5e: Prevent entering switchdev mode with inconsistent netns
net/mlx5: HWS, Generalize complex matchers
net/mlx5: Improve write-combining test reliability for ARM64 Grace CPUs
selftests/net: add tcp_port_share to .gitignore
Revert "net/mlx5e: Update and set Xon/Xoff upon MTU set"
net: add NUMA awareness to skb_attempt_defer_free()
net: use llist for sd->defer_list
net: make softnet_data.defer_count an atomic
selftests: drv-net: psp: add tests for destroying devices
selftests: drv-net: psp: add test for auto-adjusting TCP MSS
...
Pull bpf updates from Alexei Starovoitov:
- Support pulling non-linear xdp data with bpf_xdp_pull_data() kfunc
(Amery Hung)
Applied as a stable branch in bpf-next and net-next trees.
- Support reading skb metadata via bpf_dynptr (Jakub Sitnicki)
Also a stable branch in bpf-next and net-next trees.
- Enforce expected_attach_type for tailcall compatibility (Daniel
Borkmann)
- Replace path-sensitive with path-insensitive live stack analysis in
the verifier (Eduard Zingerman)
This is a significant change in the verification logic. More details,
motivation, long term plans are in the cover letter/merge commit.
- Support signed BPF programs (KP Singh)
This is another major feature that took years to materialize.
Algorithm details are in the cover letter/marge commit
- Add support for may_goto instruction to s390 JIT (Ilya Leoshkevich)
- Add support for may_goto instruction to arm64 JIT (Puranjay Mohan)
- Fix USDT SIB argument handling in libbpf (Jiawei Zhao)
- Allow uprobe-bpf program to change context registers (Jiri Olsa)
- Support signed loads from BPF arena (Kumar Kartikeya Dwivedi and
Puranjay Mohan)
- Allow access to union arguments in tracing programs (Leon Hwang)
- Optimize rcu_read_lock() + migrate_disable() combination where it's
used in BPF subsystem (Menglong Dong)
- Introduce bpf_task_work_schedule*() kfuncs to schedule deferred
execution of BPF callback in the context of a specific task using the
kernel’s task_work infrastructure (Mykyta Yatsenko)
- Enforce RCU protection for KF_RCU_PROTECTED kfuncs (Kumar Kartikeya
Dwivedi)
- Add stress test for rqspinlock in NMI (Kumar Kartikeya Dwivedi)
- Improve the precision of tnum multiplier verifier operation
(Nandakumar Edamana)
- Use tnums to improve is_branch_taken() logic (Paul Chaignon)
- Add support for atomic operations in arena in riscv JIT (Pu Lehui)
- Report arena faults to BPF error stream (Puranjay Mohan)
- Search for tracefs at /sys/kernel/tracing first in bpftool (Quentin
Monnet)
- Add bpf_strcasecmp() kfunc (Rong Tao)
- Support lookup_and_delete_elem command in BPF_MAP_STACK_TRACE (Tao
Chen)
* tag 'bpf-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (197 commits)
libbpf: Replace AF_ALG with open coded SHA-256
selftests/bpf: Add stress test for rqspinlock in NMI
selftests/bpf: Add test case for different expected_attach_type
bpf: Enforce expected_attach_type for tailcall compatibility
bpftool: Remove duplicate string.h header
bpf: Remove duplicate crypto/sha2.h header
libbpf: Fix error when st-prefix_ops and ops from differ btf
selftests/bpf: Test changing packet data from kfunc
selftests/bpf: Add stacktrace map lookup_and_delete_elem test case
selftests/bpf: Refactor stacktrace_map case with skeleton
bpf: Add lookup_and_delete_elem for BPF_MAP_STACK_TRACE
selftests/bpf: Fix flaky bpf_cookie selftest
selftests/bpf: Test changing packet data from global functions with a kfunc
bpf: Emit struct bpf_xdp_sock type in vmlinux BTF
selftests/bpf: Task_work selftest cleanup fixes
MAINTAINERS: Delete inactive maintainers from AF_XDP
bpf: Mark kfuncs as __noclone
selftests/bpf: Add kprobe multi write ctx attach test
selftests/bpf: Add kprobe write ctx attach test
selftests/bpf: Add uprobe context ip register change test
...
Provide a PSP implementation for netdevsim.
Use psp_dev_encapsulate() and psp_dev_rcv() to do actual encapsulation
and decapsulation on skbs, but perform no encryption or decryption. In
order to make encryption with a bad key result in a drop on the peer's
rx side, we stash our psd's generation number in the first byte of each
key before handing to the peer.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Co-developed-by: Daniel Zahka <daniel.zahka@gmail.com>
Signed-off-by: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20250927225420.1443468-2-kuba@kernel.org
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
page_pool_init() returns E2BIG when the page_pool size goes above 32K
pages. As some drivers are configuring the page_pool size according to
the MTU and ring size, there are cases where this limit is exceeded and
the queue creation fails.
The page_pool size doesn't have to cover a full queue, especially for
larger ring size. So clamp the size instead of returning an error. Do
this in the core to avoid having each driver do the clamping.
The current limit was deemed to high [1] so it was reduced to 16K to avoid
page waste.
[1] https://lore.kernel.org/all/1758532715-820422-3-git-send-email-tariqt@nvidia.com/
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250926131605.2276734-2-dtatulea@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull namespace updates from Christian Brauner:
"This contains a larger set of changes around the generic namespace
infrastructure of the kernel.
Each specific namespace type (net, cgroup, mnt, ...) embedds a struct
ns_common which carries the reference count of the namespace and so
on.
We open-coded and cargo-culted so many quirks for each namespace type
that it just wasn't scalable anymore. So given there's a bunch of new
changes coming in that area I've started cleaning all of this up.
The core change is to make it possible to correctly initialize every
namespace uniformly and derive the correct initialization settings
from the type of the namespace such as namespace operations, namespace
type and so on. This leaves the new ns_common_init() function with a
single parameter which is the specific namespace type which derives
the correct parameters statically. This also means the compiler will
yell as soon as someone does something remotely fishy.
The ns_common_init() addition also allows us to remove ns_alloc_inum()
and drops any special-casing of the initial network namespace in the
network namespace initialization code that Linus complained about.
Another part is reworking the reference counting. The reference
counting was open-coded and copy-pasted for each namespace type even
though they all followed the same rules. This also removes all open
accesses to the reference count and makes it private and only uses a
very small set of dedicated helpers to manipulate them just like we do
for e.g., files.
In addition this generalizes the mount namespace iteration
infrastructure introduced a few cycles ago. As reminder, the vfs makes
it possible to iterate sequentially and bidirectionally through all
mount namespaces on the system or all mount namespaces that the caller
holds privilege over. This allow userspace to iterate over all mounts
in all mount namespaces using the listmount() and statmount() system
call.
Each mount namespace has a unique identifier for the lifetime of the
systems that is exposed to userspace. The network namespace also has a
unique identifier working exactly the same way. This extends the
concept to all other namespace types.
The new nstree type makes it possible to lookup namespaces purely by
their identifier and to walk the namespace list sequentially and
bidirectionally for all namespace types, allowing userspace to iterate
through all namespaces. Looking up namespaces in the namespace tree
works completely locklessly.
This also means we can move the mount namespace onto the generic
infrastructure and remove a bunch of code and members from struct
mnt_namespace itself.
There's a bunch of stuff coming on top of this in the future but for
now this uses the generic namespace tree to extend a concept
introduced first for pidfs a few cycles ago. For a while now we have
supported pidfs file handles for pidfds. This has proven to be very
useful.
This extends the concept to cover namespaces as well. It is possible
to encode and decode namespace file handles using the common
name_to_handle_at() and open_by_handle_at() apis.
As with pidfs file handles, namespace file handles are exhaustive,
meaning it is not required to actually hold a reference to nsfs in
able to decode aka open_by_handle_at() a namespace file handle.
Instead the FD_NSFS_ROOT constant can be passed which will let the
kernel grab a reference to the root of nsfs internally and thus decode
the file handle.
Namespaces file descriptors can already be derived from pidfds which
means they aren't subject to overmount protection bugs. IOW, it's
irrelevant if the caller would not have access to an appropriate
/proc/<pid>/ns/ directory as they could always just derive the
namespace based on a pidfd already.
It has the same advantage as pidfds. It's possible to reliably and for
the lifetime of the system refer to a namespace without pinning any
resources and to compare them trivially.
Permission checking is kept simple. If the caller is located in the
namespace the file handle refers to they are able to open it otherwise
they must hold privilege over the owning namespace of the relevant
namespace.
The namespace file handle layout is exposed as uapi and has a stable
and extensible format. For now it simply contains the namespace
identifier, the namespace type, and the inode number. The stable
format means that userspace may construct its own namespace file
handles without going through name_to_handle_at() as they are already
allowed for pidfs and cgroup file handles"
* tag 'namespace-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (65 commits)
ns: drop assert
ns: move ns type into struct ns_common
nstree: make struct ns_tree private
ns: add ns_debug()
ns: simplify ns_common_init() further
cgroup: add missing ns_common include
ns: use inode initializer for initial namespaces
selftests/namespaces: verify initial namespace inode numbers
ns: rename to __ns_ref
nsfs: port to ns_ref_*() helpers
net: port to ns_ref_*() helpers
uts: port to ns_ref_*() helpers
ipv4: use check_net()
net: use check_net()
net-sysfs: use check_net()
user: port to ns_ref_*() helpers
time: port to ns_ref_*() helpers
pid: port to ns_ref_*() helpers
ipc: port to ns_ref_*() helpers
cgroup: port to ns_ref_*() helpers
...
Pull copy_process updates from Christian Brauner:
"This contains the changes to enable support for clone3() on nios2
which apparently is still a thing.
The more exciting part of this is that it cleans up the inconsistency
in how the 64-bit flag argument is passed from copy_process() into the
various other copy_*() helpers"
[ Fixed up rv ltl_monitor 32-bit support as per Sasha Levin in the merge ]
* tag 'kernel-6.18-rc1.clone3' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
nios2: implement architecture-specific portion of sys_clone3
arch: copy_thread: pass clone_flags as u64
copy_process: pass clone_flags as u64 across calltree
copy_sighand: Handle architectures where sizeof(unsigned long) < sizeof(u64)
It's misplaced in struct proc_ns_operations and ns->ops might be NULL if
the namespace is compiled out but we still want to know the type of the
namespace for the initial namespace struct.
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-09-23
We've added 9 non-merge commits during the last 33 day(s) which contain
a total of 10 files changed, 480 insertions(+), 53 deletions(-).
The main changes are:
1) A new bpf_xdp_pull_data kfunc that supports pulling data from
a frag into the linear area of a xdp_buff, from Amery Hung.
This includes changes in the xdp_native.bpf.c selftest, which
Nimrod's future work depends on.
It is a merge from a stable branch 'xdp_pull_data' which has
also been merged to bpf-next.
There is a conflict with recent changes in 'include/net/xdp.h'
in the net-next tree that will need to be resolved.
2) A compiler warning fix when CONFIG_NET=n in the recent dynptr
skb_meta support, from Jakub Sitnicki.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests: drv-net: Pull data before parsing headers
selftests/bpf: Test bpf_xdp_pull_data
bpf: Support specifying linear xdp packet data size for BPF_PROG_TEST_RUN
bpf: Make variables in bpf_prog_test_run_xdp less confusing
bpf: Clear packet pointers after changing packet data in kfuncs
bpf: Support pulling non-linear xdp data
bpf: Allow bpf_xdp_shrink_data to shrink a frag from head and tail
bpf: Clear pfmemalloc flag when freeing all fragments
bpf: Return an error pointer for skb metadata when CONFIG_NET=n
====================
Link: https://patch.msgid.link/20250924050303.2466356-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, alloc_skb_with_frags() will only fill (MAX_SKB_FRAGS - 1)
slots. I think it should use all MAX_SKB_FRAGS slots, as callers of
alloc_skb_with_frags() will size their allocation of frags based
on MAX_SKB_FRAGS.
This issue was discovered via a test patch that sets 'order' to 0
in alloc_skb_with_frags(), which effectively tests/simulates high
fragmentation. In this case sendmsg() on unix sockets will fail every
time for large allocations. If the PAGE_SIZE is 4K, then data_len will
request 68K or 17 pages, but alloc_skb_with_frags() can only allocate
64K in this case or 16 pages.
Fixes: 09c2c90705 ("net: allow alloc_skb_with_frags() to allocate bigger packets")
Signed-off-by: Jason Baron <jbaron@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250922191957.2855612-1-jbaron@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add kfunc, bpf_xdp_pull_data(), to support pulling data from xdp
fragments. Similar to bpf_skb_pull_data(), bpf_xdp_pull_data() makes
the first len bytes of data directly readable and writable in bpf
programs. If the "len" argument is larger than the linear data size,
data in fragments will be copied to the linear data area when there
is enough room. Specifically, the kfunc will try to use the tailroom
first. When the tailroom is not enough, metadata and data will be
shifted down to make room for pulling data.
A use case of the kfunc is to decapsulate headers residing in xdp
fragments. It is possible for a NIC driver to place headers in xdp
fragments. To keep using direct packet access for parsing and
decapsulating headers, users can pull headers into the linear data
area by calling bpf_xdp_pull_data() and then pop the header with
bpf_xdp_adjust_head().
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250922233356.3356453-4-ameryhung@gmail.com
Move skb_frag_t adjustment into bpf_xdp_shrink_data() and extend its
functionality to be able to shrink an xdp fragment from both head and
tail. In a later patch, bpf_xdp_pull_data() will reuse it to shrink an
xdp fragment from head.
Additionally, in bpf_xdp_frags_shrink_tail(), breaking the loop when
bpf_xdp_shrink_data() returns false (i.e., not releasing the current
fragment) is not necessary as the loop condition, offset > 0, has the
same effect. Remove the else branch to simplify the code.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-3-ameryhung@gmail.com
It is possible for bpf_xdp_adjust_tail() to free all fragments. The
kfunc currently clears the XDP_FLAGS_HAS_FRAGS bit, but not
XDP_FLAGS_FRAGS_PF_MEMALLOC. So far, this has not caused a issue when
building sk_buff from xdp_buff since all readers of xdp_buff->flags
use the flag only when there are fragments. Clear the
XDP_FLAGS_FRAGS_PF_MEMALLOC bit as well to make the flags correct.
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://patch.msgid.link/20250922233356.3356453-2-ameryhung@gmail.com
sk->sk_sndbuf is read-mostly in tx path, so move it from
sock_write_tx group to more appropriate sock_read_tx.
sk->sk_err_soft was not identified previously, but
is used from tcp_ack().
Move it to sock_write_tx group for better cache locality.
Also change tcp_ack() to clear sk->sk_err_soft only if needed.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250919204856.2977245-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This change adds a new WQ_PERCPU flag at the network subsystem, to explicitly
request the use of the per-CPU behavior. Both flags coexist for one release
cycle to allow callers to transition their calls.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
All existing users have been updated accordingly.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-4-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-3-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistentcy cannot be addressed without refactoring the API.
system_unbound_wq should be the default workqueue so as not to enforce
locality constraints for random work whenever it's not required.
Adding system_dfl_wq to encourage its use when unbound work should be used.
The old system_unbound_wq will be kept for a few release cycles.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Link: https://patch.msgid.link/20250918142427.309519-2-marco.crivellari@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Simply derive the ns operations from the namespace type.
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Replace synchronize_rcu() with synchronize_net() in __netpoll_free().
synchronize_net() is RTNL-aware and will use the more efficient
synchronize_rcu_expedited() when called under RTNL lock, avoiding
the potentially expensive synchronize_rcu() in RTNL critical sections.
Since __netpoll_free() is called with RTNL held (as indicated by
ASSERT_RTNL()), this change improves performance by reducing the
time spent in the RTNL critical section.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250918-netpoll_jv-v1-2-67d50eeb2c26@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various network interface types make use of needed_{head,tail}room values
to efficiently reserve buffer space for additional encapsulation headers,
such as VXLAN, Geneve, IPSec, etc. However, it is not currently possible
to query these values in a generic way.
Introduce ability to query the needed_{head,tail}room values of a network
device via rtnetlink, such that applications that may wish to use these
values can do so.
For example, Cilium agent iterates over present devices based on user config
(direct routing, vxlan, geneve, wireguard etc.) and in future will configure
netkit in order to expose the needed_{head,tail}room into K8s pods. See
b9ed315d3c ("netkit: Allow for configuring needed_{head,tail}room").
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alasdair McWilliam <alasdair@mcwilliam.dev>
Reviewed-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://patch.msgid.link/20250917095543.14039-1-alasdair@mcwilliam.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
