Requirement for PSMI capture is to have a physically contiguous buffer.
All the needed configuration is done by the userspace tool directly to
the GPU via mmio access.
This interface only support allocating from VRAM regions. For integrated
devices, the PSMI buffer is in SYSTEM memory and should be allocated by
userspace using hugetlbfs.
Here we add the ability to allocate a region of physically contiguous
memory by writing to debugfs file (listed below). For multi-tile devices,
the capture tool requires ability to allocate a capture buffer per tile
(VRAM region) and so user can specify a region_mask. The tool then
can mmap the buffers via direct mmap of the PCIBAR via sysfs.
To support the capture tool, 3 new debugfs entries are added:
psmi_capture_addr - physical address per VRAM region's capture buffer
psmi_capture_region_mask - select which region(s) to allocate a buffer
psmi_capture_size - size of current capture buffer
Writing psmi_capture_size will allocate new buffer of requested size per
region after freeing any current buffers.
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Original-author: Brian Welty <brian.welty@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com> # v2
Link: https://lore.kernel.org/r/20250821-psmi-v5-2-34ab7550d3d8@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
There are two registers filled in when reading data from
pcode besides the mailbox itself. Currently, we allow a NULL
value for the second of these two (data1) and assume the first
is defined. However, many of the routines that are calling
this function assume that pcode will ignore the value being
passed in and so leave that first value (data0) defined but
uninitialized. To be safe, make sure this value is always
initialized to something (0 generally) in the event pcode
behavior changes and starts using this value.
v2: Fix sob/author
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250819201054.393220-1-stuart.summers@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We are currently bumping gt_count as we define GTs for each tile. While
that works with our current code, there are reasons to improve that:
* That section of the code is dedicated to define each tile's set of GTs
and their respective info. The gt_count can be seen as a device level
property. While it is fair to bump it as we define each GT, we can
also focus on the GT themselves and count after we are done with the
definitions.
* More *importantly*, gt_count should reflect the number of GTs that we
would get when looping over them with for_each_gt(). Bumping gt_count
the way we are currently doing makes that value not really connected
to for_each_gt(). This could bite us in the future if in the loop gets
extra checks that are not accounted for in each existing "gt_count++".
As such, let's use for_each_gt() and extract the calculation of gt_count
into a separate block, just after we define the set of GTs for each
tile.
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250818-gt_count-improvements-v4-2-ee12870c6f57@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The function mmio_multi_tile_setup() does not look like the proper
location for probing for the number of existing tiles in the hardware.
It should not be that function's responsibility and such information
should instead be already available when it gets called.
The fact that we need to adjust gt_count is a symptom of that.
Move probing of available tile count to a dedicated function named
xe_info_probe_tile_count() and call it from xe_info_init(), which seems
like a more appropriate place for that.
With that move, we no longer need to (and shouldn't) adjust gt_count as
a part of xe_info_probe_tile_count(), as that field will be initialized
later in xe_info_init().
v4:
- Only probe for tile count if the default tile_count != 1 (just like
was done in mmio_multi_tile_setup()). (CI)
v3:
- Unchanged.
v2:
- Use KUnit static stub so that we do not try to query hardware when
running KUnit tests. (CI)
- Tweak last paragraph of commit message to make it clearer.
(Jonathan)
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250818-gt_count-improvements-v4-1-ee12870c6f57@intel.com
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
The drm_gpusvm_for_each_notifier, drm_gpusvm_for_each_notifier_safe and
drm_gpusvm_for_each_range_safe macros are useful for locating notifiers
and ranges within a user-specified range. By making these macros public,
we enable broader access and utility for developers who need to leverage
them in their implementations.
v2 (Matthew Brost)
- drop inline __drm_gpusvm_range_find
- /s/notifier_iter_first/drm_gpusvm_notifier_find
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-5-himal.prasad.ghimiray@intel.com
drm-misc-next for v6.18:
UAPI Changes:
- Add DRM_IOCTL_GEM_CHANGE_HANDLE for reassigning GEM handles
- Document DRM_MODE_PAGE_FLIP_EVENT
Cross-subsystem Changes:
fbcon:
- Add missing declarations in fbcon.h
Core Changes:
bridge:
- Fix ref counting
panel:
- Replace and remove mipi_dsi_generic_write_{seq/_chatty}()
sched:
- Fixes
Rust:
- Drop Opaque<> from ioctl arguments
Driver Changes:
amdxdma:
- Support buffers allocated by user space
- Streamline PM interfaces
- Fixes
bridge:
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
gud:
- Fixes
ivpu:
- Fixes
nouveau:
- Use GSP firmware by default
- Fixes
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
panthor:
- Print task/pid on errors
- Fixes
renesas:
- convert to RUNTIME_PM_OPS
repaper:
- Use shadow-plane helpers
rocket:
- Add driver for Rockchip NPU plus DT bindings
sharp-memory:
- Use shadow-plane helpers
simpledrm:
- Use of_reserved_mem_region_to_resource() helper
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
vmwgfx:
- Fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250814072454.GA18104@linux.fritz.box
VFs without native PCIe Power Management (PM) capabilities inherit their
PF's power state as per PCIe specifications(§5.10.1 PCIe Base Spec 7.0).
Enabling Runtime Power Management (RPM) for these VFs trigger unnecessary
driver suspend/resume operations that ultimately perform no PCI-level power
transition.
Since VFs without PM capabilities cannot independently enter low-power
states, the existing RPM workflow becomes redundant:
1. Driver executes full suspend/resume sequence
2. PCI PM transition step becomes no-op
3. VF power state remains tied to PF's status
Disabling RPM for VFs eliminates this redundant processing while
maintaining proper power management through PF dependency. This
optimization ensures VFs follow their PF's power state without superfluous
runtime handling.
Signed-off-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Maarten Lankhorst <dev@lankhorst.se>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250812163613.9954-1-satyanarayana.k.v.p@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Pull x86 fixes from Borislav Petkov:
- Remove a transitional asm/cpuid.h header which was added only as a
fallback during cpuid helpers reorg
- Initialize reserved fields in the SVSM page validation calls
structure to zero in order to allow for future structure extensions
- Have the sev-guest driver's buffers used in encryption operations be
in linear mapping space as the encryption operation can be offloaded
to an accelerator
- Have a read-only MSR write when in an AMD SNP guest trap to the
hypervisor as it is usually done. This makes the guest user
experience better by simply raising a #GP instead of terminating said
guest
- Do not output AVX512 elapsed time for kernel threads because the data
is wrong and fix a NULL pointer dereferencing in the process
- Adjust the SRSO mitigation selection to the new attack vectors
* tag 'x86_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpuid: Remove transitional <asm/cpuid.h> header
x86/sev: Ensure SVSM reserved fields in a page validation entry are initialized to zero
virt: sev-guest: Satisfy linear mapping requirement in get_derived_key()
x86/sev: Improve handling of writes to intercepted TSC MSRs
x86/fpu: Fix NULL dereference in avx512_status()
x86/bugs: Select best SRSO mitigation
Pull locking fixes from Borislav Petkov:
- Make sure sanity checks down in the mutex lock path happen on the
correct type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to
prevent an error on PowerPC which does user read and write accesses
differently
* tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix __clear_task_blocked_on() warning from __ww_mutex_wound() path
futex: Use user_write_access_begin/_end() in futex_put_value()
Pull rust fixes from Miguel Ojeda:
- Workaround 'rustdoc' target modifiers bug in Rust >= 1.88.0. It will
be fixed in Rust 1.90.0 (expected 2025-09-18).
- Clean 'rustdoc' output before running it to avoid confusing the tool
when files from previous versions remain.
* tag 'rust-fixes-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: clean output before running `rustdoc`
rust: workaround `rustdoc` target modifiers bug
Pull ata fixes from Damien Le Moal:
- Fix a regression affecting old IDE/PATA device scan and introduced by
the recent link power management cleanups & fixes. The regression
prevented devices from being properly detected (me)
- Fix command duration limits (CDL) feature control: attempting to
enable the feature while NCQ commands are being executed resulted in
a silent failure to enable CDL when needed (Igor)
* tag 'ata-ata-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Fix CDL control
ata: libata-eh: Fix link state check for IDE/PATA ports
Pull SCSI fixes from James Bottomley:
"One core change removing the 'w' access flag of attributes that don't
have a set routine (and therefore can't be written to) which should
have no practical impact. The big scsi_debug update is caused by
reformatting lots of arrays and the rest of the bug fixes in drivers
are trivial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove error print for devm_add_action_or_reset()
scsi: ufs: mediatek: Fix out-of-bounds access in MCQ IRQ mapping
scsi: lpfc: Remove redundant assignment to avoid memory leak
scsi: lpfc: Fix wrong function reference in a comment
scsi: ufs: core: Fix interrupt handling for MCQ Mode
scsi: scsi_debug: Make read-only arrays static const
scsi: core: sysfs: Correct sysfs attributes access rights
Pull drm fixes from Dave Airlie:
"Relatively quiet week, usual amdgpu/i915/xe fixes along with a set of
fixes for fbdev format info, which fix some regressions seen in with
rc1.
bridge:
- fix OF-node leak
- fix documentation
fbdev-emulation:
- pass correct format info to drm_helper_mode_fill_fb_struct()
panfrost:
- print correct RSS size
amdgpu:
- PSP fix
- VRAM reservation fix
- CSA fix
- Process kill fix
i915:
- Fix the implementation of wa_18038517565 [fbc]
- Do not trigger Frame Change events from frontbuffer flush [psr]
xe:
- Some more xe_migrate_access_memory fixes (Auld)
- Defer buffer object shrinker write-backs and GPU waits (Thomas)
- HWMON fix for clamping limits (Karthik)
- SRIOV-PF: Set VF LMEM BAR size (Michal)"
* tag 'drm-fixes-2025-08-16' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/pf: Set VF LMEM BAR size
drm/amdgpu: fix task hang from failed job submission during process kill
drm/amdgpu: fix incorrect vm flags to map bo
drm/amdgpu: fix vram reservation issue
drm/amdgpu: Add PSP fw version check for fw reserve GFX command
drm/xe/hwmon: Add SW clamp for power limits writes
drm/xe: Defer buffer object shrinker write-backs and GPU waits
drm/xe/migrate: prevent potential UAF
drm/xe/migrate: don't overflow max copy size
drm/xe/migrate: prevent infinite recursion
drm/i915/psr: Do not trigger Frame Change events from frontbuffer flush
drm/i915/fbc: fix the implementation of wa_18038517565
drm/panfrost: Print RSS for tiler heap BO's in debugfs GEMS file
drm/radeon: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/nouveau: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/omap: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/bridge: document HDMI CEC callbacks
drm/bridge: Describe the newly introduced drm_connector parameter for drm_bridge_detect
drm/bridge: fix OF node leak
Pull xfs fixes from Carlos Maiolino:
- Fix an assert trigger introduced during the merge window
- Prevent atomic writes to be used with DAX
- Prevent users from using the max_atomic_write mount option without
reflink, as atomic writes > 1block are not supported without reflink
- Fix a null-pointer-deref in a tracepoint
* tag 'xfs-fixes-6.17-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: split xfs_zone_record_blocks
xfs: fix scrub trace with null pointer in quotacheck
xfs: reject max_atomic_write mount option for no reflink
xfs: disallow atomic writes on DAX
fs/dax: Reject IOCB_ATOMIC in dax_iomap_rw()
xfs: remove XFS_IBULK_SAME_AG
xfs: fully decouple XFS_IBULK* flags from XFS_IWALK* flags
xfs: fix frozen file system assert in xfs_trans_alloc
Detecting the monitor for DisplayPort targets is more complicated than
just reading the HPD pin level: it requires reading the DPCD in order to
check what kind of device is attached to the port and whether there is
an actual display attached.
In order to let DRM framework handle such configurations, disable
DRM_BRIDGE_OP_DETECT for dp-connector devices, letting the actual DP
driver perform detection. This still keeps DRM_BRIDGE_OP_HPD enabled, so
it is valid for the bridge to report HPD events.
Currently inside the kernel there are only two targets which list
hpd-gpios for dp-connector devices: arm64/qcom/qcs6490-rb3gen2 and
arm64/qcom/sa8295p-adp. Both should be fine with this change.
Cc: Bjorn Andersson <andersson@kernel.org>
Cc: Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-arm-msm@vger.kernel.org
Acked-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20250802-dp-conn-no-detect-v1-1-2748c2b946da@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Pull block fixes from Jens Axboe:
- Fix for unprivileged daemons in ublk
- Speedup ublk release by removing unnecessary quiesce
- Fix for blk-wbt, where a regression caused it to not be possible to
enable at runtime
- blk-wbt cleanups
- Kill the page pool from drbd
- Remove redundant __GFP_NOWARN uses in a few spots
- Fix for a kobject double initialization issues
* tag 'block-6.17-20250815' of git://git.kernel.dk/linux:
block: restore default wbt enablement
Docs: admin-guide: Correct spelling mistake
blk-wbt: doc: Update the doc of the wbt_lat_usec interface
blk-wbt: Eliminate ambiguity in the comments of struct rq_wb
blk-wbt: Optimize wbt_done() for non-throttled writes
block: fix kobject double initialization in add_disk
blk-cgroup: remove redundant __GFP_NOWARN
block, bfq: remove redundant __GFP_NOWARN
ublk: check for unprivileged daemon on each I/O fetch
ublk: don't quiesce in ublk_ch_release
drbd: Remove the open-coded page pool
All CPUID call sites were updated at commit:
968e300068 ("x86/cpuid: Set <asm/cpuid/api.h> as the main CPUID header")
to include <asm/cpuid/api.h> instead of <asm/cpuid.h>.
The <asm/cpuid.h> header was still retained as a wrapper, just in case
some new code in -next started using it. Now that everything is merged
to Linus' tree, remove the header.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250815070227.19981-2-darwi@linutronix.de
Commit
7ffeb2fc26 ("x86/sev: Document requirement for linear mapping of guest request buffers")
added a check that requires the guest request buffers to be in the linear
mapping. The get_derived_key() function was passing a buffer that was
allocated on the stack, resulting in the call to snp_send_guest_request()
returning an error.
Update the get_derived_key() function to use an allocated buffer instead
of a stack buffer.
Fixes: 7ffeb2fc26 ("x86/sev: Document requirement for linear mapping of guest request buffers")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/9b764ca9fc79199a091aac684c4926e2080ca7a8.1752698495.git.thomas.lendacky@amd.com
Pull io_uring fixes from Jens Axboe:
- Tweak for the fairly recent changes of minimizing io-wq worker
creations when it's pointless to create them.
- Fix for an issue with ring provided buffers, which could cause issues
with reuse or corrupt application data.
* tag 'io_uring-6.17-20250815' of git://git.kernel.dk/linux:
io_uring/io-wq: add check free worker before create new worker
io_uring/net: commit partial buffers on retry
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- Potential OOB access fixes in USB-audio driver
- ASoC kconfig menu fix for improving the generic drivers
- HD-audio quirks and a fix revert
- Codec and platform-specific small fixes for ASoC"
* tag 'sound-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/tas2781: Normalize the volume kcontrol name
ALSA: usb-audio: Validate UAC3 cluster segment descriptors
ALSA: usb-audio: Validate UAC3 power domain descriptors, too
Revert "ALSA: hda: Add ASRock X670E Taichi to denylist"
ALSA: azt3328: Put __maybe_unused for inline functions for gameport
ASoC: tas2781: Normalize the volume kcontrol name
ASoC: stm: stm32_i2s: Fix calc_clk_div() error handling in determine_rate()
ASoC: codecs: Call strscpy() with correct size argument
ALSA: hda/realtek: Fix headset mic on HONOR BRB-X
ALSA: hda/realtek: Add Framework Laptop 13 (AMD Ryzen AI 300) to quirks
ASoC: tas2781: Fix spelling mistake "dismatch" -> "mismatch"
ASoC: rt1320: fix random cycle mute issue
ASoC: rt721: fix FU33 Boost Volume control not working
ASoC: generic: tidyup standardized ASoC menu for generic
ASoC: codec: sma1307: replace spelling mistake with new error message
ASoC: codecs: tx-macro: correct tx_macro_component_drv name
ASoC: fsl_sai: replace regmap_write with regmap_update_bits
Pull gpio fix from Bartosz Golaszewski:
- fix the way optional interrupts are retrieved from firmware in
gpio-mlxbf3
* tag 'gpio-fixes-for-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: use platform_get_irq_optional()
Revert "gpio: mlxbf3: only get IRQ for device instance 0"
Pull pmdomain fix from Ulf Hansson:
- tegra: Ensure pmc power-domains are in a known state
* tag 'pmdomain-v6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
soc/tegra: pmc: Ensure power-domains are in a known state
Pull smb client fixes from Steve French:
- Fix unlink race and rename races
- SMB3.1.1 compression fix
- Avoid unneeded strlen calls in cifs_get_spnego_key
- Fix slab out of bounds in parse_server_interfaces()
- Fix mid leak and server buffer leak
- smbdirect send error path fix
- update internal version #
- Fix unneeded response time update in negotiate protocol
* tag '6.17-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: remove redundant lstrp update in negotiate protocol
cifs: update internal version number
smb: client: don't wait for info->send_pending == 0 on error
smb: client: fix mid_q_entry memleak leak with per-mid locking
smb3: fix for slab out of bounds on mount to ksmbd
cifs: avoid extra calls to strlen() in cifs_get_spnego_key()
cifs: Fix collect_sample() to handle any iterator type
smb: client: fix race with concurrent opens in rename(2)
smb: client: fix race with concurrent opens in unlink(2)
As the FLUSH_MEM and FLUSH_PT MMU_AS commands are deprecated in GPUs
from Mali-Gx20 onwards, this patch adds support for performing cache
maintenance via the FLUSH_CACHES command in GPU_COMMAND in place of
FLUSH_MEM and FLUSH_PT commands.
Mali-Gx10 and Mali-Gx15 GPUs also has support for the FLUSH_CACHES
command and will also use this by default going forward.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-7-karunika.choo@arm.com
Mali-Gx15 introduces a new GPU_FEATURES register that provides
information about GPU-wide supported features. The register value will
be passed on to userspace via gpu_info.
Additionally, Mali-Gx15 presents an 'Immortalis' naming variant
depending on the shader core count and presence of Ray Intersection
feature support.
This patch adds:
- support for correctly identifying the model names for Mali-Gx15 GPUs.
- arch 11.8 FW binary support
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-5-karunika.choo@arm.com
This patch introduces panthor_hw and moves the initialization of the
gpu_info struct into panthor_hw.c in preparation of handling future GPU
register and naming changes.
Future GPU support can be added by extending panthor_gpu_info_init()
with the necessary register reads behind GPU architecture version guards
if the change is minor. For more complex changes, the function can be
forked and the appropriate function will need to be called based on the
GPU architecture version.
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Karunika Choo <karunika.choo@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250807162633.3666310-2-karunika.choo@arm.com
