Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Wait for device readiness after reset by polling Vendor ID and
looking for Configuration RRS instead of polling the Command
register and looking for non-error completions, to avoid hardware
retries done for RRS on non-Vendor ID reads (Bjorn Helgaas)
- Rename CRS Completion Status to RRS ('Request Retry Status') to
match PCIe r6.0 spec usage (Bjorn Helgaas)
- Clear LBMS bit after a manual link retrain so we don't try to
retrain a link when there's no downstream device anymore (Maciej W.
Rozycki)
- Revert to the original link speed after retraining fails instead of
leaving it restricted to 2.5GT/s, so a future device has a chance
to use higher speeds (Maciej W. Rozycki)
- Wait for each level of downstream bus, not just the first, to
become accessible before restoring devices on that bus (Ilpo
Järvinen)
- Add ARCH_PCI_DEV_GROUPS so s390 can add its own attribute_groups
without having to stomp on the core's pdev->dev.groups (Lukas
Wunner)
Driver binding:
- Export pcim_request_region(), a managed counterpart of
pci_request_region(), for use by drivers (Philipp Stanner)
- Export pcim_iomap_region() and deprecate pcim_iomap_regions()
(Philipp Stanner)
- Request the PCI BAR used by xboxvideo (Philipp Stanner)
- Request and map drm/ast BARs with pcim_iomap_region() (Philipp
Stanner)
MSI:
- Add MSI_FLAG_NO_AFFINITY flag for devices that mux MSIs onto a
single IRQ line and cannot set the affinity of each MSI to a
specific CPU core (Marek Vasut)
- Use MSI_FLAG_NO_AFFINITY and remove unnecessary .irq_set_affinity()
implementations in aardvark, altera, brcmstb, dwc, mediatek-gen3,
mediatek, mobiveil, plda, rcar, tegra, vmd, xilinx-nwl,
xilinx-xdma, and xilinx drivers to avoid 'IRQ: set affinity failed'
warnings (Marek Vasut)
Power management:
- Add pwrctl support for ATH11K inside the WCN6855 package (Konrad
Dybcio)
PCI device hotplug:
- Remove unnecessary hpc_ops struct from shpchp (ngn)
- Check for PCI_POSSIBLE_ERROR(), not 0xffffffff, in cpqphp
(weiyufeng)
Virtualization:
- Mark Creative Labs EMU20k2 INTx masking as broken (Alex Williamson)
- Add an ACS quirk for Qualcomm SA8775P, which doesn't advertise ACS
but does provide ACS-like features (Subramanian Ananthanarayanan)
IOMMU:
- Add function 0 DMA alias quirk for Glenfly Arise audio function,
which uses the function 0 Requester ID (WangYuli)
NPEM:
- Add Native PCIe Enclosure Management (NPEM) support for sysfs
control of NVMe RAID storage indicators (ok/fail/locate/
rebuild/etc) (Mariusz Tkaczyk)
- Add support for the ACPI _DSM PCIe SSD status LED management, which
is functionally similar to NPEM but mediated by platform firmware
(Mariusz Tkaczyk)
Device trees:
- Drop minItems and maxItems from ranges in PCI generic host binding
since host bridges may have several MMIO and I/O port apertures
(Frank Li)
- Add kirin, rcar-gen2, uniphier DT binding top-level constraints for
clocks (Krzysztof Kozlowski)
Altera PCIe controller driver:
- Convert altera DT bindings from text to YAML (Matthew Gerlach)
- Replace TLP_REQ_ID() with macro PCI_DEVID(), which does the same
thing and is what other drivers use (Jinjie Ruan)
Broadcom STB PCIe controller driver:
- Add DT binding maxItems for reset controllers (Jim Quinlan)
- Use the 'bridge' reset method if described in the DT (Jim Quinlan)
- Use the 'swinit' reset method if described in the DT (Jim Quinlan)
- Add 'has_phy' so the existence of a 'rescal' reset controller
doesn't imply software control of it (Jim Quinlan)
- Add support for many inbound DMA windows (Jim Quinlan)
- Rename SoC 'type' to 'soc_base' express the fact that SoCs come in
families of multiple similar devices (Jim Quinlan)
- Add Broadcom 7712 DT description and driver support (Jim Quinlan)
- Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings for
maintainability (Bjorn Helgaas)
Freescale i.MX6 PCIe controller driver:
- Add imx6q-pcie 'dbi2' and 'atu' reg-names for i.MX8M Endpoints
(Richard Zhu)
- Fix a code restructuring error that caused i.MX8MM and i.MX8MP
Endpoints to fail to establish link (Richard Zhu)
- Fix i.MX8MP Endpoint occasional failure to trigger MSI by enforcing
outbound alignment requirement (Richard Zhu)
- Call phy_power_off() in the .probe() error path (Frank Li)
- Rename internal names from imx6_* to imx_* since i.MX7/8/9 are also
supported (Frank Li)
- Manage Refclk by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Manage core reset by using SoC-specific callbacks instead of switch
statements (Frank Li)
- Expand comments for erratum ERR010728 workaround (Frank Li)
- Use generic PHY APIs to configure mode, speed, and submode, which
is harmless for devices that implement their own internal PHY
management and don't set the generic imx_pcie->phy (Frank Li)
- Add i.MX8Q (i.MX8QM, i.MX8QXP, and i.MX8DXL) DT binding and driver
Root Complex support (Richard Zhu)
Freescale Layerscape PCIe controller driver:
- Replace layerscape-pcie DT binding compatible fsl,lx2160a-pcie with
fsl,lx2160ar2-pcie (Frank Li)
- Add layerscape-pcie DT binding deprecated 'num-viewport' property
to address a DT checker warning (Frank Li)
- Change layerscape-pcie DT binding 'fsl,pcie-scfg' to phandle-array
(Frank Li)
Loongson PCIe controller driver:
- Increase max PCI hosts to 8 for Loongson-3C6000 and newer chipsets
(Huacai Chen)
Marvell Aardvark PCIe controller driver:
- Fix issue with emulating Configuration RRS for two-byte reads of
Vendor ID; previously it only worked for four-byte reads (Bjorn
Helgaas)
MediaTek PCIe Gen3 controller driver:
- Add per-SoC struct mtk_gen3_pcie_pdata to support multiple SoC
types (Lorenzo Bianconi)
- Use reset_bulk APIs to manage PHY reset lines (Lorenzo Bianconi)
- Add DT and driver support for Airoha EN7581 PCIe controller
(Lorenzo Bianconi)
Qualcomm PCIe controller driver:
- Update qcom,pcie-sc7280 DT binding with eight interrupts (Rayyan
Ansari)
- Add back DT 'vddpe-3v3-supply', which was incorrectly removed
earlier (Johan Hovold)
- Drop endpoint redundant masking of global IRQ events (Manivannan
Sadhasivam)
- Clarify unknown global IRQ message and only log it once to avoid a
flood (Manivannan Sadhasivam)
- Add 'linux,pci-domain' property to endpoint DT binding (Manivannan
Sadhasivam)
- Assign PCI domain number for endpoint controllers (Manivannan
Sadhasivam)
- Add 'qcom_pcie_ep' and the PCI domain number to IRQ names for
endpoint controller (Manivannan Sadhasivam)
- Add global SPI interrupt for PCIe link events to DT binding
(Manivannan Sadhasivam)
- Add global RC interrupt handler to handle 'Link up' events and
automatically enumerate hot-added devices (Manivannan Sadhasivam)
- Avoid mirroring of DBI and iATU register space so it doesn't
overlap BAR MMIO space (Prudhvi Yarlagadda)
- Enable controller resources like PHY only after PERST# is
deasserted to partially avoid the problem that the endpoint SoC
crashes when accessing things when Refclk is absent (Manivannan
Sadhasivam)
- Add 16.0 GT/s equalization and RX lane margining settings (Shashank
Babu Chinta Venkata)
- Pass domain number to pci_bus_release_domain_nr() explicitly to
avoid a NULL pointer dereference (Manivannan Sadhasivam)
Renesas R-Car PCIe controller driver:
- Make the read-only const array 'check_addr' static (Colin Ian King)
- Add R-Car V4M (R8A779H0) PCIe host and endpoint to DT binding
(Yoshihiro Shimoda)
TI DRA7xx PCIe controller driver:
- Request IRQF_ONESHOT for 'dra7xx-pcie-main' IRQ since the primary
handler is NULL (Siddharth Vadapalli)
- Handle IRQ request errors during root port and endpoint probe
(Siddharth Vadapalli)
TI J721E PCIe driver:
- Add DT 'ti,syscon-acspcie-proxy-ctrl' and driver support to enable
the ACSPCIE module to drive Refclk for the Endpoint (Siddharth
Vadapalli)
- Extract the cadence link setup from cdns_pcie_host_setup() so link
setup can be done separately during resume (Thomas Richard)
- Add T_PERST_CLK_US definition for the mandatory delay between
Refclk becoming stable and PERST# being deasserted (Thomas Richard)
- Add j721e suspend and resume support (Théo Lebrun)
TI Keystone PCIe controller driver:
- Fix NULL pointer checking when applying MRRS limitation quirk for
AM65x SR 1.0 Errata #i2037 (Dan Carpenter)
Xilinx NWL PCIe controller driver:
- Fix off-by-one error in INTx IRQ handler that caused INTx
interrupts to be lost or delivered as the wrong interrupt (Sean
Anderson)
- Rate-limit misc interrupt messages (Sean Anderson)
- Turn off the clock on probe failure and device removal (Sean
Anderson)
- Add DT binding and driver support for enabling/disabling PHYs (Sean
Anderson)
- Add PCIe phy bindings for the ZCU102 (Sean Anderson)
Xilinx XDMA PCIe controller driver:
- Add support for Xilinx QDMA Soft IP PCIe Root Port Bridge to DT
binding and xilinx-dma-pl driver (Thippeswamy Havalige)
Miscellaneous:
- Fix buffer overflow in kirin_pcie_parse_port() (Alexandra Diupina)
- Fix minor kerneldoc issues and typos (Bjorn Helgaas)
- Use PCI_DEVID() macro in aer_inject() instead of open-coding it
(Jinjie Ruan)
- Check pcie_find_root_port() return in x86 fixups to avoid NULL
pointer dereferences (Samasth Norway Ananda)
- Make pci_bus_type constant (Kunwu Chan)
- Remove unused declarations of __pci_pme_wakeup() and
pci_vpd_release() (Yue Haibing)
- Remove any leftover .*.cmd files with make clean (zhang jiao)
- Remove unused BILLION macro (zhang jiao)"
* tag 'pci-v6.12-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (132 commits)
PCI: Fix typos
dt-bindings: PCI: qcom: Allow 'vddpe-3v3-supply' again
tools: PCI: Remove unused BILLION macro
tools: PCI: Remove .*.cmd files with make clean
PCI: Pass domain number to pci_bus_release_domain_nr() explicitly
PCI: dra7xx: Fix error handling when IRQ request fails in probe
PCI: dra7xx: Fix threaded IRQ request for "dra7xx-pcie-main" IRQ
PCI: qcom: Add RX lane margining settings for 16.0 GT/s
PCI: qcom: Add equalization settings for 16.0 GT/s
PCI: dwc: Always cache the maximum link speed value in dw_pcie::max_link_speed
PCI: dwc: Rename 'dw_pcie::link_gen' to 'dw_pcie::max_link_speed'
PCI: qcom-ep: Enable controller resources like PHY only after refclk is available
PCI: Mark Creative Labs EMU20k2 INTx masking as broken
dt-bindings: PCI: imx6q-pcie: Add reg-name "dbi2" and "atu" for i.MX8M PCIe Endpoint
dt-bindings: PCI: altera: msi: Convert to YAML
PCI: imx6: Add i.MX8Q PCIe Root Complex (RC) support
PCI: Rename CRS Completion Status to RRS
PCI: aardvark: Correct Configuration RRS checking
PCI: Wait for device readiness with Configuration RRS
PCI: brcmstb: Sort enums, pcie_offsets[], pcie_cfg_data, .compatible strings
...
Pull 'struct fd' updates from Al Viro:
"Just the 'struct fd' layout change, with conversion to accessor
helpers"
* tag 'pull-stable-struct_fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
add struct fd constructors, get rid of __to_fd()
struct fd: representation change
introduce fd_file(), convert all accessors to it.
Pull non-MM updates from Andrew Morton:
"Many singleton patches - please see the various changelogs for
details.
Quite a lot of nilfs2 work this time around.
Notable patch series in this pull request are:
- "mul_u64_u64_div_u64: new implementation" by Nicolas Pitre, with
assistance from Uwe Kleine-König. Reimplement mul_u64_u64_div_u64()
to provide (much) more accurate results. The current implementation
was causing Uwe some issues in the PWM drivers.
- "xz: Updates to license, filters, and compression options" from
Lasse Collin. Miscellaneous maintenance and kinor feature work to
the xz decompressor.
- "Fix some GDB command error and add some GDB commands" from
Kuan-Ying Lee. Fixes and enhancements to the gdb scripts.
- "treewide: add missing MODULE_DESCRIPTION() macros" from Jeff
Johnson. Adds lots of MODULE_DESCRIPTIONs, thus fixing lots of
warnings about this.
- "nilfs2: add support for some common ioctls" from Ryusuke Konishi.
Adds various commonly-available ioctls to nilfs2.
- "This series fixes a number of formatting issues in kernel doc
comments" from Ryusuke Konishi does that.
- "nilfs2: prevent unexpected ENOENT propagation" from Ryusuke
Konishi. Fix issues where -ENOENT was being unintentionally and
inappropriately returned to userspace.
- "nilfs2: assorted cleanups" from Huang Xiaojia.
- "nilfs2: fix potential issues with empty b-tree nodes" from Ryusuke
Konishi fixes some issues which can occur on corrupted nilfs2
filesystems.
- "scripts/decode_stacktrace.sh: improve error reporting and
usability" from Luca Ceresoli does those things"
* tag 'mm-nonmm-stable-2024-09-21-07-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (103 commits)
list: test: increase coverage of list_test_list_replace*()
list: test: fix tests for list_cut_position()
proc: use __auto_type more
treewide: correct the typo 'retun'
ocfs2: cleanup return value and mlog in ocfs2_global_read_info()
nilfs2: remove duplicate 'unlikely()' usage
nilfs2: fix potential oob read in nilfs_btree_check_delete()
nilfs2: determine empty node blocks as corrupted
nilfs2: fix potential null-ptr-deref in nilfs_btree_insert()
user_namespace: use kmemdup_array() instead of kmemdup() for multiple allocation
tools/mm: rm thp_swap_allocator_test when make clean
squashfs: fix percpu address space issues in decompressor_multi_percpu.c
lib: glob.c: added null check for character class
nilfs2: refactor nilfs_segctor_thread()
nilfs2: use kthread_create and kthread_stop for the log writer thread
nilfs2: remove sc_timer_task
nilfs2: do not repair reserved inode bitmap in nilfs_new_inode()
nilfs2: eliminate the shared counter and spinlock for i_generation
nilfs2: separate inode type information from i_state field
nilfs2: use the BITS_PER_LONG macro
...
Pull MM updates from Andrew Morton:
"Along with the usual shower of singleton patches, notable patch series
in this pull request are:
- "Align kvrealloc() with krealloc()" from Danilo Krummrich. Adds
consistency to the APIs and behaviour of these two core allocation
functions. This also simplifies/enables Rustification.
- "Some cleanups for shmem" from Baolin Wang. No functional changes -
mode code reuse, better function naming, logic simplifications.
- "mm: some small page fault cleanups" from Josef Bacik. No
functional changes - code cleanups only.
- "Various memory tiering fixes" from Zi Yan. A small fix and a
little cleanup.
- "mm/swap: remove boilerplate" from Yu Zhao. Code cleanups and
simplifications and .text shrinkage.
- "Kernel stack usage histogram" from Pasha Tatashin and Shakeel
Butt. This is a feature, it adds new feilds to /proc/vmstat such as
$ grep kstack /proc/vmstat
kstack_1k 3
kstack_2k 188
kstack_4k 11391
kstack_8k 243
kstack_16k 0
which tells us that 11391 processes used 4k of stack while none at
all used 16k. Useful for some system tuning things, but
partivularly useful for "the dynamic kernel stack project".
- "kmemleak: support for percpu memory leak detect" from Pavel
Tikhomirov. Teaches kmemleak to detect leaksage of percpu memory.
- "mm: memcg: page counters optimizations" from Roman Gushchin. "3
independent small optimizations of page counters".
- "mm: split PTE/PMD PT table Kconfig cleanups+clarifications" from
David Hildenbrand. Improves PTE/PMD splitlock detection, makes
powerpc/8xx work correctly by design rather than by accident.
- "mm: remove arch_make_page_accessible()" from David Hildenbrand.
Some folio conversions which make arch_make_page_accessible()
unneeded.
- "mm, memcg: cg2 memory{.swap,}.peak write handlers" fro David
Finkel. Cleans up and fixes our handling of the resetting of the
cgroup/process peak-memory-use detector.
- "Make core VMA operations internal and testable" from Lorenzo
Stoakes. Rationalizaion and encapsulation of the VMA manipulation
APIs. With a view to better enable testing of the VMA functions,
even from a userspace-only harness.
- "mm: zswap: fixes for global shrinker" from Takero Funaki. Fix
issues in the zswap global shrinker, resulting in improved
performance.
- "mm: print the promo watermark in zoneinfo" from Kaiyang Zhao. Fill
in some missing info in /proc/zoneinfo.
- "mm: replace follow_page() by folio_walk" from David Hildenbrand.
Code cleanups and rationalizations (conversion to folio_walk())
resulting in the removal of follow_page().
- "improving dynamic zswap shrinker protection scheme" from Nhat
Pham. Some tuning to improve zswap's dynamic shrinker. Significant
reductions in swapin and improvements in performance are shown.
- "mm: Fix several issues with unaccepted memory" from Kirill
Shutemov. Improvements to the new unaccepted memory feature,
- "mm/mprotect: Fix dax puds" from Peter Xu. Implements mprotect on
DAX PUDs. This was missing, although nobody seems to have notied
yet.
- "Introduce a store type enum for the Maple tree" from Sidhartha
Kumar. Cleanups and modest performance improvements for the maple
tree library code.
- "memcg: further decouple v1 code from v2" from Shakeel Butt. Move
more cgroup v1 remnants away from the v2 memcg code.
- "memcg: initiate deprecation of v1 features" from Shakeel Butt.
Adds various warnings telling users that memcg v1 features are
deprecated.
- "mm: swap: mTHP swap allocator base on swap cluster order" from
Chris Li. Greatly improves the success rate of the mTHP swap
allocation.
- "mm: introduce numa_memblks" from Mike Rapoport. Moves various
disparate per-arch implementations of numa_memblk code into generic
code.
- "mm: batch free swaps for zap_pte_range()" from Barry Song. Greatly
improves the performance of munmap() of swap-filled ptes.
- "support large folio swap-out and swap-in for shmem" from Baolin
Wang. With this series we no longer split shmem large folios into
simgle-page folios when swapping out shmem.
- "mm/hugetlb: alloc/free gigantic folios" from Yu Zhao. Nice
performance improvements and code reductions for gigantic folios.
- "support shmem mTHP collapse" from Baolin Wang. Adds support for
khugepaged's collapsing of shmem mTHP folios.
- "mm: Optimize mseal checks" from Pedro Falcato. Fixes an mprotect()
performance regression due to the addition of mseal().
- "Increase the number of bits available in page_type" from Matthew
Wilcox. Increases the number of bits available in page_type!
- "Simplify the page flags a little" from Matthew Wilcox. Many legacy
page flags are now folio flags, so the page-based flags and their
accessors/mutators can be removed.
- "mm: store zero pages to be swapped out in a bitmap" from Usama
Arif. An optimization which permits us to avoid writing/reading
zero-filled zswap pages to backing store.
- "Avoid MAP_FIXED gap exposure" from Liam Howlett. Fixes a race
window which occurs when a MAP_FIXED operqtion is occurring during
an unrelated vma tree walk.
- "mm: remove vma_merge()" from Lorenzo Stoakes. Major rotorooting of
the vma_merge() functionality, making ot cleaner, more testable and
better tested.
- "misc fixups for DAMON {self,kunit} tests" from SeongJae Park.
Minor fixups of DAMON selftests and kunit tests.
- "mm: memory_hotplug: improve do_migrate_range()" from Kefeng Wang.
Code cleanups and folio conversions.
- "Shmem mTHP controls and stats improvements" from Ryan Roberts.
Cleanups for shmem controls and stats.
- "mm: count the number of anonymous THPs per size" from Barry Song.
Expose additional anon THP stats to userspace for improved tuning.
- "mm: finish isolate/putback_lru_page()" from Kefeng Wang: more
folio conversions and removal of now-unused page-based APIs.
- "replace per-quota region priorities histogram buffer with
per-context one" from SeongJae Park. DAMON histogram
rationalization.
- "Docs/damon: update GitHub repo URLs and maintainer-profile" from
SeongJae Park. DAMON documentation updates.
- "mm/vdpa: correct misuse of non-direct-reclaim __GFP_NOFAIL and
improve related doc and warn" from Jason Wang: fixes usage of page
allocator __GFP_NOFAIL and GFP_ATOMIC flags.
- "mm: split underused THPs" from Yu Zhao. Improve THP=always policy.
This was overprovisioning THPs in sparsely accessed memory areas.
- "zram: introduce custom comp backends API" frm Sergey Senozhatsky.
Add support for zram run-time compression algorithm tuning.
- "mm: Care about shadow stack guard gap when getting an unmapped
area" from Mark Brown. Fix up the various arch_get_unmapped_area()
implementations to better respect guard areas.
- "Improve mem_cgroup_iter()" from Kinsey Ho. Improve the reliability
of mem_cgroup_iter() and various code cleanups.
- "mm: Support huge pfnmaps" from Peter Xu. Extends the usage of huge
pfnmap support.
- "resource: Fix region_intersects() vs add_memory_driver_managed()"
from Huang Ying. Fix a bug in region_intersects() for systems with
CXL memory.
- "mm: hwpoison: two more poison recovery" from Kefeng Wang. Teaches
a couple more code paths to correctly recover from the encountering
of poisoned memry.
- "mm: enable large folios swap-in support" from Barry Song. Support
the swapin of mTHP memory into appropriately-sized folios, rather
than into single-page folios"
* tag 'mm-stable-2024-09-20-02-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (416 commits)
zram: free secondary algorithms names
uprobes: turn xol_area->pages[2] into xol_area->page
uprobes: introduce the global struct vm_special_mapping xol_mapping
Revert "uprobes: use vm_special_mapping close() functionality"
mm: support large folios swap-in for sync io devices
mm: add nr argument in mem_cgroup_swapin_uncharge_swap() helper to support large folios
mm: fix swap_read_folio_zeromap() for large folios with partial zeromap
mm/debug_vm_pgtable: Use pxdp_get() for accessing page table entries
set_memory: add __must_check to generic stubs
mm/vma: return the exact errno in vms_gather_munmap_vmas()
memcg: cleanup with !CONFIG_MEMCG_V1
mm/show_mem.c: report alloc tags in human readable units
mm: support poison recovery from copy_present_page()
mm: support poison recovery from do_cow_fault()
resource, kunit: add test case for region_intersects()
resource: make alloc_free_mem_region() works for iomem_resource
mm: z3fold: deprecate CONFIG_Z3FOLD
vfio/pci: implement huge_fault support
mm/arm64: support large pfn mappings
mm/x86: support large pfn mappings
...
Pull dma-mapping updates from Christoph Hellwig:
- support DMA zones for arm64 systems where memory starts at > 4GB
(Baruch Siach, Catalin Marinas)
- support direct calls into dma-iommu and thus obsolete dma_map_ops for
many common configurations (Leon Romanovsky)
- add DMA-API tracing (Sean Anderson)
- remove the not very useful return value from various dma_set_* APIs
(Christoph Hellwig)
- misc cleanups and minor optimizations (Chen Y, Yosry Ahmed, Christoph
Hellwig)
* tag 'dma-mapping-6.12-2024-09-19' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: reflow dma_supported
dma-mapping: reliably inform about DMA support for IOMMU
dma-mapping: add tracing for dma-mapping API calls
dma-mapping: use IOMMU DMA calls for common alloc/free page calls
dma-direct: optimize page freeing when it is not addressable
dma-mapping: clearly mark DMA ops as an architecture feature
vdpa_sim: don't select DMA_OPS
arm64: mm: keep low RAM dma zone
dma-mapping: don't return errors from dma_set_max_seg_size
dma-mapping: don't return errors from dma_set_seg_boundary
dma-mapping: don't return errors from dma_set_min_align_mask
scsi: check that busses support the DMA API before setting dma parameters
arm64: mm: fix DMA zone when dma-ranges is missing
dma-mapping: direct calls for dma-iommu
dma-mapping: call ->unmap_page and ->unmap_sg unconditionally
arm64: support DMA zone above 4GB
dma-mapping: replace zone_dma_bits by zone_dma_limit
dma-mapping: use bit masking to check VM_DMA_COHERENT
Pull drm updates from Dave Airlie:
"This adds a couple of patches outside the drm core, all should be
acked appropriately, the string and pstore ones are the main ones that
come to mind.
Otherwise it's the usual drivers, xe is getting enabled by default on
some new hardware, we've changed the device number handling to allow
more devices, and we added some optional rust code to create QR codes
in the panic handler, an idea first suggested I think 10 years ago :-)
string:
- add mem_is_zero()
core:
- support more device numbers
- use XArray for minor ids
- add backlight constants
- Split dma fence array creation into alloc and arm
fbdev:
- remove usage of old fbdev hooks
kms:
- Add might_fault() to drm_modeset_lock priming
- Add dynamic per-crtc vblank configuration support
dma-buf:
- docs cleanup
buddy:
- Add start address support for trim function
printk:
- pass description to kmsg_dump
scheduler:
- Remove full_recover from drm_sched_start
ttm:
- Make LRU walk restartable after dropping locks
- Allow direct reclaim to allocate local memory
panic:
- add display QR code (in rust)
displayport:
- mst: GUID improvements
bridge:
- Silence error message on -EPROBE_DEFER
- analogix: Clean aup
- bridge-connector: Fix double free
- lt6505: Disable interrupt when powered off
- tc358767: Make default DP port preemphasis configurable
- lt9611uxc: require DRM_BRIDGE_ATTACH_NO_CONNECTOR
- anx7625: simplify OF array handling
- dw-hdmi: simplify clock handling
- lontium-lt8912b: fix mode validation
- nwl-dsi: fix mode vsync/hsync polarity
xe:
- Enable LunarLake and Battlemage support
- Introducing Xe2 ccs modifiers for integrated and discrete graphics
- rename xe perf to xe observation
- use wb caching on DGFX for system memory
- add fence timeouts
- Lunar Lake graphics/media/display workarounds
- Battlemage workarounds
- Battlemage GSC support
- GSC and HuC fw updates for LL/BM
- use dma_fence_chain_free
- refactor hw engine lookup and mmio access
- enable priority mem read for Xe2
- Add first GuC BMG fw
- fix dma-resv lock
- Fix DGFX display suspend/resume
- Use xe_managed for kernel BOs
- Use reserved copy engine for user binds on faulting devices
- Allow mixing dma-fence jobs and long-running faulting jobs
- fix media TLB invalidation
- fix rpm in TTM swapout path
- track resources and VF state by PF
i915:
- Type-C programming fix for MTL+
- FBC cleanup
- Calc vblank delay more accurately
- On DP MST, Enable LT fallback for UHBR<->non-UHBR rates
- Fix DP LTTPR detection
- limit relocations to INT_MAX
- fix long hangs in buddy allocator on DG2/A380
amdgpu:
- Per-queue reset support
- SDMA devcoredump support
- DCN 4.0.1 updates
- GFX12/VCN4/JPEG4 updates
- Convert vbios embedded EDID to drm_edid
- GFX9.3/9.4 devcoredump support
- process isolation framework for GFX 9.4.3/4
- take IOMMU mappings into account for P2P DMA
amdkfd:
- CRIU fixes
- HMM fix
- Enable process isolation support for GFX 9.4.3/4
- Allow users to target recommended SDMA engines
- KFD support for targetting queues on recommended SDMA engines
radeon:
- remove .load and drm_dev_alloc
- Fix vbios embedded EDID size handling
- Convert vbios embedded EDID to drm_edid
- Use GEM references instead of TTM
- r100 cp init cleanup
- Fix potential overflows in evergreen CS offset tracking
msm:
- DPU:
- implement DP/PHY mapping on SC8180X
- Enable writeback on SM8150, SC8180X, SM6125, SM6350
- DP:
- Enable widebus on all relevant chipsets
- MSM8998 HDMI support
- GPU:
- A642L speedbin support
- A615/A306/A621 support
- A7xx devcoredump support
ast:
- astdp: Support AST2600 with VGA
- Clean up HPD
- Fix timeout loop for DP link training
- reorganize output code by type (VGA, DP, etc)
- convert to struct drm_edid
- fix BMC handling for all outputs
exynos:
- drop stale MAINTAINERS pattern
- constify struct
loongson:
- use GEM refcount over TTM
mgag200:
- Improve BMC handling
- Support VBLANK intterupts
- transparently support BMC outputs
nouveau:
- Refactor and clean up internals
- Use GEM refcount over TTM's
gm12u320:
- convert to struct drm_edid
gma500:
- update i2c terms
lcdif:
- pixel clock fix
host1x:
- fix syncpoint IRQ during resume
- use iommu_paging_domain_alloc()
imx:
- ipuv3: convert to struct drm_edid
omapdrm:
- improve error handling
- use common helper for_each_endpoint_of_node()
panel:
- add support for BOE TV101WUM-LL2 plus DT bindings
- novatek-nt35950: improve error handling
- nv3051d: improve error handling
- panel-edp:
- add support for BOE NE140WUM-N6G
- revert support for SDC ATNA45AF01
- visionox-vtdr6130:
- improve error handling
- use devm_regulator_bulk_get_const()
- boe-th101mb31ig002:
- Support for starry-er88577 MIPI-DSI panel plus DT
- Fix porch parameter
- edp: Support AOU B116XTN02.3, AUO B116XAN06.1, AOU B116XAT04.1, BOE
NV140WUM-N41, BOE NV133WUM-N63, BOE NV116WHM-A4D, CMN N116BCA-EA2,
CMN N116BCP-EA2, CSW MNB601LS1-4
- himax-hx8394: Support Microchip AC40T08A MIPI Display panel plus DT
- ilitek-ili9806e: Support Densitron DMT028VGHMCMI-1D TFT plus DT
- jd9365da:
- Support Melfas lmfbx101117480 MIPI-DSI panel plus DT
- Refactor for code sharing
- panel-edp: fix name for HKC MB116AN01
- jd9365da: fix "exit sleep" commands
- jdi-fhd-r63452: simplify error handling with DSI multi-style
helpers
- mantix-mlaf057we51: simplify error handling with DSI multi-style
helpers
- simple:
- support Innolux G070ACE-LH3 plus DT bindings
- support On Tat Industrial Company KD50G21-40NT-A1 plus DT
bindings
- st7701:
- decouple DSI and DRM code
- add SPI support
- support Anbernic RG28XX plus DT bindings
mediatek:
- support alpha blending
- remove cl in struct cmdq_pkt
- ovl adaptor fix
- add power domain binding for mediatek DPI controller
renesas:
- rz-du: add support for RZ/G2UL plus DT bindings
rockchip:
- Improve DP sink-capability reporting
- dw_hdmi: Support 4k@60Hz
- vop:
- Support RGB display on Rockchip RK3066
- Support 4096px width
sti:
- convert to struct drm_edid
stm:
- Avoid UAF wih managed plane and CRTC helpers
- Fix module owner
- Fix error handling in probe
- Depend on COMMON_CLK
- ltdc:
- Fix transparency after disabling plane
- Remove unused interrupt
tegra:
- gr3d: improve PM domain handling
- convert to struct drm_edid
- Call drm_atomic_helper_shutdown()
vc4:
- fix PM during detect
- replace DRM_ERROR() with drm_error()
- v3d: simplify clock retrieval
v3d:
- Clean up perfmon
virtio:
- add DRM capset"
* tag 'drm-next-2024-09-19' of https://gitlab.freedesktop.org/drm/kernel: (1326 commits)
drm/xe: Fix missing conversion to xe_display_pm_runtime_resume
drm/xe/xe2hpg: Add Wa_15016589081
drm/xe: Don't keep stale pointer to bo->ggtt_node
drm/xe: fix missing 'xe_vm_put'
drm/xe: fix build warning with CONFIG_PM=n
drm/xe: Suppress missing outer rpm protection warning
drm/xe: prevent potential UAF in pf_provision_vf_ggtt()
drm/amd/display: Add all planes on CRTC to state for overlay cursor
drm/i915/bios: fix printk format width
drm/i915/display: Fix BMG CCS modifiers
drm/amdgpu: get rid of bogus includes of fdtable.h
drm/amdkfd: CRIU fixes
drm/amdgpu: fix a race in kfd_mem_export_dmabuf()
drm: new helper: drm_gem_prime_handle_to_dmabuf()
drm/amdgpu/atomfirmware: Silence UBSAN warning
drm/amdgpu: Fix kdoc entry in 'amdgpu_vm_cpu_prepare'
drm/amd/amdgpu: apply command submission parser for JPEG v1
drm/amd/amdgpu: apply command submission parser for JPEG v2+
drm/amd/pm: fix the pp_dpm_pcie issue on smu v14.0.2/3
drm/amd/pm: update the features set on smu v14.0.2/3
...
Pull sound updates from Takashi Iwai:
"A fairly big update at this time, both in core and driver sides.
The core received rewrites in PCM buffer allocation handling and
locking optimizations, PCM rate updates followed by lots of cleanups.
In ASoC side, the legacy Intel drivers have been deprecated by AVS
drivers which leaded to the significant amount of code reduction.
SoundWire driver updates and other cleanups contributed more code
reduction, too.
USB-audio driver received a large cleanup of its big quirk table, and
the old snd_print*() API usages in many legacy drivers are replaced
with the standard print API.
Here are some highlights:
Core:
- More optimized locking in ALSA control code
- Rewrites of memalloc helpers for better DMA API usage
- Drop of obsoleted vmalloc PCM buffer helper API
- Continued MIDI2 UMP updates
- Support of a new user-space driven timer instance
- Update for more PCM support rates and cleanups
- Xrun counter report in the proc files
ASoC:
- Continued simplification and cleanup works for ASoC
- Extensive cleanups and refactoring of the Soundwire drivers
- Removal of Intel machine support obsoleted by the AVS driver
- Lots of DT schema conversions
- Machine support for many AMD and Intel x86 platforms
- Support for AMD ACP 7.1, Mediatek MT6367 and MT8365, Realtek
RTL1320 SoundWire and rev C, and Texas Instruments TAS2563
USB-audio:
- Add support of multiple control interfaces
- A large rewrite of quirk table with macros
- Support for RME Digiface USB
HD-audio:
- Cleanup of quirk code for Samsung Galaxy laptops
- Clean up of detection of Cirrus codecs
- C-Media CM9825 HD-audio codec support
Others:
- Rewrites to standard print API in a lot of legacy drivers"
* tag 'sound-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (410 commits)
ASoC: topology: Fix redundant logical jump
ASoC: tas2781: Add Calibration Kcontrols for Chromebook
ASoC: amd: acp: refactor SoundWire machine driver code
ASoC: sdw_utils/intel: move soundwire endpoint parsing helper functions
ASoC: sdw_util/intel: move soundwire endpoint and dai link structures
ASoC: intel: sof_sdw: rename soundwire parsing helper functions
ASoC: intel: sof_sdw: rename soundwire endpoint and dailink structures
ASoC: atmel: mchp-pdmc: Retain Non-Runtime Controls
ALSA: hda/realtek: Add support for Galaxy Book2 Pro (NP950XEE)
ASoC: mediatek: mt7986-afe-pcm: Remove redundant error message
ALSA: memalloc: Use proper DMA mapping API for x86 S/G buffer allocations
ALSA: memalloc: Use proper DMA mapping API for x86 WC buffer allocations
ALSA: usb-audio: Add logitech Audio profile quirk
ASoc: mediatek: mt8365: Remove unneeded assignment
ASoC: Intel: ARL: Add entry for HDMI-In capture support to non-I2S codec boards.
ASoC: Intel: sof_rt5682: Add HDMI-In capture with rt5682 support for ARL.
ASoC: SOF: Intel: hda: remove common_hdmi_codec_drv
ASoC: Intel: sof_pcm512x: do not check common_hdmi_codec_drv
ASoC: Intel: ehl_rt5660: do not check common_hdmi_codec_drv
ASoC: Intel: skl_hda_dsp_generic: use common module for DAI links
...
Pull timer updates from Thomas Gleixner:
"Core:
- Overhaul of posix-timers in preparation of removing the workaround
for periodic timers which have signal delivery ignored.
- Remove the historical extra jiffie in msleep()
msleep() adds an extra jiffie to the timeout value to ensure
minimal sleep time. The timer wheel ensures minimal sleep time
since the large rewrite to a non-cascading wheel, but the extra
jiffie in msleep() remained unnoticed. Remove it.
- Make the timer slack handling correct for realtime tasks.
The procfs interface is inconsistent and does neither reflect
reality nor conforms to the man page. Show the correct 0 slack for
real time tasks and enforce it at the core level instead of having
inconsistent individual checks in various timer setup functions.
- The usual set of updates and enhancements all over the place.
Drivers:
- Allow the ACPI PM timer to be turned off during suspend
- No new drivers
- The usual updates and enhancements in various drivers"
* tag 'timers-core-2024-09-16' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
ntp: Make sure RTC is synchronized when time goes backwards
treewide: Fix wrong singular form of jiffies in comments
cpu: Use already existing usleep_range()
timers: Rename next_expiry_recalc() to be unique
platform/x86:intel/pmc: Fix comment for the pmc_core_acpi_pm_timer_suspend_resume function
clocksource/drivers/jcore: Use request_percpu_irq()
clocksource/drivers/cadence-ttc: Add missing clk_disable_unprepare in ttc_setup_clockevent
clocksource/drivers/asm9260: Add missing clk_disable_unprepare in asm9260_timer_init
clocksource/drivers/qcom: Add missing iounmap() on errors in msm_dt_timer_init()
clocksource/drivers/ingenic: Use devm_clk_get_enabled() helpers
platform/x86:intel/pmc: Enable the ACPI PM Timer to be turned off when suspended
clocksource: acpi_pm: Add external callback for suspend/resume
clocksource/drivers/arm_arch_timer: Using for_each_available_child_of_node_scoped()
dt-bindings: timer: rockchip: Add rk3576 compatible
timers: Annotate possible non critical data race of next_expiry
timers: Remove historical extra jiffie for timeout in msleep()
hrtimer: Use and report correct timerslack values for realtime tasks
hrtimer: Annotate hrtimer_cpu_base_.*_expiry() for sparse.
timers: Add sparse annotation for timer_sync_wait_running().
signal: Replace BUG_ON()s
...
Pull vfs folio updates from Christian Brauner:
"This contains work to port write_begin and write_end to rely on folios
for various filesystems.
This converts ocfs2, vboxfs, orangefs, jffs2, hostfs, fuse, f2fs,
ecryptfs, ntfs3, nilfs2, reiserfs, minixfs, qnx6, sysv, ufs, and
squashfs.
After this series lands a bunch of the filesystems in this list do not
mention struct page anymore"
* tag 'vfs-6.12.folio' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (61 commits)
Squashfs: Ensure all readahead pages have been used
Squashfs: Rewrite and update squashfs_readahead_fragment() to not use page->index
Squashfs: Update squashfs_readpage_block() to not use page->index
Squashfs: Update squashfs_readahead() to not use page->index
Squashfs: Update page_actor to not use page->index
jffs2: Use a folio in jffs2_garbage_collect_dnode()
jffs2: Convert jffs2_do_readpage_nolock to take a folio
buffer: Convert __block_write_begin() to take a folio
ocfs2: Convert ocfs2_write_zero_page to use a folio
fs: Convert aops->write_begin to take a folio
fs: Convert aops->write_end to take a folio
vboxsf: Use a folio in vboxsf_write_end()
orangefs: Convert orangefs_write_begin() to use a folio
orangefs: Convert orangefs_write_end() to use a folio
jffs2: Convert jffs2_write_begin() to use a folio
jffs2: Convert jffs2_write_end() to use a folio
hostfs: Convert hostfs_write_end() to use a folio
fuse: Convert fuse_write_begin() to use a folio
fuse: Convert fuse_write_end() to use a folio
f2fs: Convert f2fs_write_begin() to use a folio
...
Pull misc vfs updates from Christian Brauner:
"This contains the usual pile of misc updates:
Features:
- Add F_CREATED_QUERY fcntl() that allows userspace to query whether
a file was actually created. Often userspace wants to know whether
an O_CREATE request did actually create a file without using
O_EXCL. The current logic is that to first attempts to open the
file without O_CREAT | O_EXCL and if ENOENT is returned userspace
tries again with both flags. If that succeeds all is well. If it
now reports EEXIST it retries.
That works fairly well but some corner cases make this more
involved. If this operates on a dangling symlink the first openat()
without O_CREAT | O_EXCL will return ENOENT but the second openat()
with O_CREAT | O_EXCL will fail with EEXIST.
The reason is that openat() without O_CREAT | O_EXCL follows the
symlink while O_CREAT | O_EXCL doesn't for security reasons. So
it's not something we can really change unless we add an explicit
opt-in via O_FOLLOW which seems really ugly.
All available workarounds are really nasty (fanotify, bpf lsm etc)
so add a simple fcntl().
- Try an opportunistic lookup for O_CREAT. Today, when opening a file
we'll typically do a fast lookup, but if O_CREAT is set, the kernel
always takes the exclusive inode lock. This was likely done with
the expectation that O_CREAT means that we always expect to do the
create, but that's often not the case. Many programs set O_CREAT
even in scenarios where the file already exists (see related
F_CREATED_QUERY patch motivation above).
The series contained in the pr rearranges the pathwalk-for-open
code to also attempt a fast_lookup in certain O_CREAT cases. If a
positive dentry is found, the inode_lock can be avoided altogether
and it can stay in rcuwalk mode for the last step_into.
- Expose the 64 bit mount id via name_to_handle_at()
Now that we provide a unique 64-bit mount ID interface in statx(2),
we can now provide a race-free way for name_to_handle_at(2) to
provide a file handle and corresponding mount without needing to
worry about racing with /proc/mountinfo parsing or having to open a
file just to do statx(2).
While this is not necessary if you are using AT_EMPTY_PATH and
don't care about an extra statx(2) call, users that pass full paths
into name_to_handle_at(2) need to know which mount the file handle
comes from (to make sure they don't try to open_by_handle_at a file
handle from a different filesystem) and switching to AT_EMPTY_PATH
would require allocating a file for every name_to_handle_at(2) call
- Add a per dentry expire timeout to autofs
There are two fairly well known automounter map formats, the autofs
format and the amd format (more or less System V and Berkley).
Some time ago Linux autofs added an amd map format parser that
implemented a fair amount of the amd functionality. This was done
within the autofs infrastructure and some functionality wasn't
implemented because it either didn't make sense or required extra
kernel changes. The idea was to restrict changes to be within the
existing autofs functionality as much as possible and leave changes
with a wider scope to be considered later.
One of these changes is implementing the amd options:
1) "unmount", expire this mount according to a timeout (same as
the current autofs default).
2) "nounmount", don't expire this mount (same as setting the
autofs timeout to 0 except only for this specific mount) .
3) "utimeout=<seconds>", expire this mount using the specified
timeout (again same as setting the autofs timeout but only for
this mount)
To implement these options per-dentry expire timeouts need to be
implemented for autofs indirect mounts. This is because all map
keys (mounts) for autofs indirect mounts use an expire timeout
stored in the autofs mount super block info. structure and all
indirect mounts use the same expire timeout.
Fixes:
- Fix missing fput for FSCONFIG_SET_FD in autofs
- Use param->file for FSCONFIG_SET_FD in coda
- Delete the 'fs/netfs' proc subtreee when netfs module exits
- Make sure that struct uid_gid_map fits into a single cacheline
- Don't flush in-flight wb switches for superblocks without cgroup
writeback
- Correcting the idmapping mount example in the idmapping
documentation
- Fix a race between evice_inodes() and find_inode() and iput()
- Refine the show_inode_state() macro definition in writeback code
- Prevent dump_mapping() from accessing invalid dentry.d_name.name
- Show actual source for debugfs in /proc/mounts
- Annotate data-race of busy_poll_usecs in eventpoll
- Don't WARN for racy path_noexec check in exec code
- Handle OOM on mnt_warn_timestamp_expiry()
- Fix some spelling in the iomap design documentation
- Fix typo in procfs comment
- Fix typo in fs/namespace.c comment
Cleanups:
- Add the VFS git tree to the MAINTAINERS file
- Move FMODE_UNSIGNED_OFFSET to fop_flags freeing up another f_mode
bit in struct file bringing us to 5 free f_mode bits
- Remove the __I_DIO_WAKEUP bit from i_state flags as we can simplify
the wait mechanism
- Remove the unused path_put_init() helper
- Replace a __u32 with u32 for s_fsnotify_mask as __u32 is uapi
specific
- Replace the unsigned long i_state member with a u32 i_state member
in struct inode freeing up 4 bytes in struct inode. Instead of
using the bit based wait apis we're now using the var event apis
and using the individual bytes of the i_state member to wait on
state changes
- Explain how per-syscall AT_* flags should be allocated
- Use in_group_or_capable() helper to simplify the posix acl mode
update code
- Switch to LIST_HEAD() in fsync_buffers_list() to simplify the code
- Removed comment about d_rcu_to_refcount() as that function doesn't
exist anymore
- Add kernel documentation for lookup_fast()
- Don't re-zero evenpoll fields
- Remove outdated comment after close_fd()
- Fix imprecise wording in comment about the pipe filesystem
- Drop GFP_NOFAIL mode from alloc_page_buffers
- Missing blank line warnings and struct declaration improved in
file_table
- Annotate struct poll_list with __counted_by()
- Remove the unused read parameter in percpu-rwsem
- Remove linux/prefetch.h include from direct-io code
- Use kmemdup_array instead of kmemdup for multiple allocation in
mnt_idmapping code
- Remove unused mnt_cursor_del() declaration
Performance tweaks:
- Dodge smp_mb in break_lease and break_deleg in the common case
- Only read fops once in fops_{get,put}()
- Use RCU in ilookup()
- Elide smp_mb in iversion handling in the common case
- Drop one lock trip in evict()"
* tag 'vfs-6.12.misc' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (58 commits)
uidgid: make sure we fit into one cacheline
proc: Fix typo in the comment
fs/pipe: Correct imprecise wording in comment
fhandle: expose u64 mount id to name_to_handle_at(2)
uapi: explain how per-syscall AT_* flags should be allocated
fs: drop GFP_NOFAIL mode from alloc_page_buffers
writeback: Refine the show_inode_state() macro definition
fs/inode: Prevent dump_mapping() accessing invalid dentry.d_name.name
mnt_idmapping: Use kmemdup_array instead of kmemdup for multiple allocation
netfs: Delete subtree of 'fs/netfs' when netfs module exits
fs: use LIST_HEAD() to simplify code
inode: make i_state a u32
inode: port __I_LRU_ISOLATING to var event
vfs: fix race between evice_inodes() and find_inode()&iput()
inode: port __I_NEW to var event
inode: port __I_SYNC to var event
fs: reorder i_state bits
fs: add i_state helpers
MAINTAINERS: add the VFS git tree
fs: s/__u32/u32/ for s_fsnotify_mask
...
Pull ARM updates from Russell King:
- clean up TTBCR magic numbers and use u32 for this register
- fix clang issue in VFP code leading to kernel oops, caused by
compiler instruction scheduling.
- switch 32-bit Arm to use GENERIC_CPU_DEVICES and use the
arch_cpu_is_hotpluggable() hook.
- pass struct device to arm_iommu_create_mapping() and move over to use
iommu_paging_domain_alloc() rather than iommu_domain_alloc()
- make amba_bustype constant
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9418/1: dma-mapping: Use iommu_paging_domain_alloc()
ARM: 9417/1: dma-mapping: Pass device to arm_iommu_create_mapping()
ARM: 9416/1: amba: make amba_bustype constant
ARM: 9412/1: Convert to arch_cpu_is_hotpluggable()
ARM: 9411/1: Switch over to GENERIC_CPU_DEVICES using arch_register_cpu()
ARM: 9410/1: vfp: Use asm volatile in fmrx/fmxr macros
ARM: 9409/1: mmu: Do not use magic number for TTBCR settings
The 'runtime_status' field is an implementation detail of the
power management code, so a device driver should not normally
touch this:
drivers/gpu/drm/xe/xe_pm.c: In function 'xe_pm_suspending_or_resuming':
drivers/gpu/drm/xe/xe_pm.c:606:26: error: 'struct dev_pm_info' has no member named 'runtime_status'
606 | return dev->power.runtime_status == RPM_SUSPENDING ||
| ^
drivers/gpu/drm/xe/xe_pm.c:607:27: error: 'struct dev_pm_info' has no member named 'runtime_status'
607 | dev->power.runtime_status == RPM_RESUMING;
| ^
drivers/gpu/drm/xe/xe_pm.c:608:1: error: control reaches end of non-void function [-Werror=return-type]
Add an #ifdef check to avoid the build regression.
Fixes: ad92f52312 ("drm/xe: Suppress missing outer rpm protection warning")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909202521.1018439-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 1c129ed07d)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Do not raise a WARN if we are likely within suspending or resuming
path. This is likely this false positive:
rpm_status: 0000:03:00.0 status=RPM_SUSPENDING
console: xe_bo_evict_all (called from suspend)
xe_sched_job_create: dev=0000:03:00.0, ...
xe_sched_job_exec: dev=0000:03:00.0, ...
xe_pm_runtime_put: dev=0000:03:00.0, ...
xe_sched_job_run: dev=0000:03:00.0, ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
rpm_usage: 0000:03:00.0 flags-0 cnt-2 ...
console: xe 0000:03:00.0: [drm] Missing outer runtime
PM protection
console: xe_guc_ct_send+0x15/0x50 [xe]
console: guc_exec_queue_run_job+0x1509/0x3950 [xe]
[snip]
console: drm_sched_run_job_work+0x649/0xc20
At this point, BOs are getting evicted from VRAM with rpm
usage-counter = 2, but rpm status = SUSPENDING.
The xe->pm_callback_task won't be equal 'current' because this call is
coming from a work queue.
So, pm_runtime_get_if_active() will be called and return 0 because rpm
status != ACTIVE (but equal SUSPENDING or RESUMING).
v2: Still get the reference even on non suspending/resuming
path (Jonathan, Brost).
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905140215.56404-1-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit cb85e39dc5)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0c8c5bdd7e)
[Why]
DC has a special commit path for native cursor, which use the built-in
cursor pipe within DCN planes. This update path does not require all
enabled planes to be added to the list of surface updates sent to DC.
This is not the case for overlay cursor; it uses the same path as MPO
commits. This update path requires all enabled planes to be added to the
list of surface updates sent to DC. Otherwise, DC will disable planes
not inside the list.
[How]
If overlay cursor is needed, add all planes on the same CRTC as this
cursor to the atomic state. This is already done for non-cursor planes
(MPO), just before the added lines.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Thomas needs 5a498d4d06 ("drm/fbdev-dma: Only install deferred I/O
if necessary") in drm-misc, so start the backmerge cascade.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Three cleanups
- Drop stale exynos file pattern from MAINTAINERS file
The old "exynos" directory is removed from MAINTAINERS as Samsung Exynos display bindings have been relocated. This resolves a warning from get_maintainers.pl about no files matching the outdated directory.
- Constify struct exynos_drm_ipp_funcs
By making struct exynos_drm_ipp_funcs constant, the patch enhances security by moving the structure to a read-only section of memory. This change results in a slight reduction in the data section size.
- Remove unnecessary code
The function exynos_atomic_commit is removed as it became redundant after a previous update. This cleans up the code and eliminates unused function declarations.
One fixup
- Fix wrong assignment in gsc_bind()
A double assignment in gsc_bind() was flagged by the cocci tool and corrected to fix an incorrect assignment, addressing a potential issue introduced in a prior commit.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240909004641.406858-1-inki.dae@samsung.com
Driver Changes:
- Expose fan speed via hwmon (Raag)
- Correction to Wa_14019159160 on ARL (John H)
- Whitelist COMMON_SLICE_CHICKEN1 for UMD access on DG2/MTL/ARL (Dnyaneshwar)
- Do not attempt to load the GSC multiple times to avoid hanging GSC HW (Daniele)
- Populate /sys/class/drm/cardX/engines/ even if one engine fails (Andi)
- Use kmemdup_array instead of kmemdup for multiple allocation (Yu)
- Remove extra unlikely() (Hongbo)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Ztrfr_Wuurfa-3Rv@jlahtine-mobl.ger.corp.intel.com
This patch extends the same cs parser from JPEG v4.0.3 to
other JPEG versions (v2 and above).
Rename to more common name as jpeg_v2_dec_ring_parse_cs()
from jpeg_v4_0_3_dec_ring_parse_cs().
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 88dcad2d07)
Cc: stable@vger.kernel.org
fix the pp_dpm_pcie issue on smu v14.0.2/3 as below:
0: 2.5GT/s, x4 250Mhz
1: 8.0GT/s, x4 616Mhz *
2: 8.0GT/s, x4 1143Mhz *
the middle level can be removed since it is always skipped on
smu v14.0.2/3
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fedf6db3ea)
[Why]
drm_normalize_zpos will set the crtc_state->zpos_changed to 1 if any of
it's assigned planes changes zpos, or is removed/added from it.
To have amdgpu_dm request a plane reset on this is too broad. For
example, if only the cursor plane was moved from one crtc to another,
the crtc's zpos_changed will be set to true. But that does not mean that
the underlying primary plane requires a reset.
[How]
Narrow it down so that only the plane that has a change in zpos will
require a reset.
As a future TODO, we can further optimize this by only requiring a reset
on z-order change. Z-order is different from z-pos, since a zpos change
doesn't necessarily mean the z-ordering changed, and DC should only
require a reset if the z-ordering changed.
For example, the following zpos update does not change z-ordering:
Plane A: zpos 2 -> 3
Plane B: zpos 1 -> 2
=> Plane A is still on top of plane B: no reset needed
Whereas this one does change z-ordering:
Plane A: zpos 2 -> 1
Plane B: zpos 1 -> 2
=> Plane A changed from on top, to below plane B: reset needed
Fixes: 38e0c3df6d ("drm/amd/display: Move PRIMARY plane zpos higher")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3569
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 578aab4ecc)
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn35_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn35_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn35_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 0607a50c00)
Cc: stable@vger.kernel.org
dc_state_destruct() nulls the resource context of the DC state. The pipe
context passed to dcn10_set_drr() is a member of this resource context.
If dc_state_destruct() is called parallel to the IRQ processing (which
calls dcn10_set_drr() at some point), we can end up using already nulled
function callback fields of struct stream_resource.
The logic in dcn10_set_drr() already tries to avoid this, by checking tg
against NULL. But if the nulling happens exactly after the NULL check and
before the next access, then we get a race.
Avoid this by copying tg first to a local variable, and then use this
variable for all the operations. This should work, as long as nobody
frees the resource pool where the timing generators live.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3142
Fixes: 06ad7e1642 ("drm/amd/display: Destroy DC context while keeping DML and DML2")
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Tested-by: Raoul van Rüschen <raoul.van.rueschen@gmail.com>
Tested-by: Christopher Snowhill <chris@kode54.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Tested-by: Sefa Eyeoglu <contact@scrumplex.net>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a3cc326a43)
Cc: stable@vger.kernel.org
