Pull tracing updates from Steven Rostedt:
- Have module addresses get updated in the persistent ring buffer
The addresses of the modules from the previous boot are saved in the
persistent ring buffer. If the same modules are loaded and an address
is in the old buffer points to an address that was both saved in the
persistent ring buffer and is loaded in memory, shift the address to
point to the address that is loaded in memory in the trace event.
- Print function names for irqs off and preempt off callsites
When ignoring the print fmt of a trace event and just printing the
fields directly, have the fields for preempt off and irqs off events
still show the function name (via kallsyms) instead of just showing
the raw address.
- Clean ups of the histogram code
The histogram functions saved over 800 bytes on the stack to process
events as they come in. Instead, create per-cpu buffers that can hold
this information and have a separate location for each context level
(thread, softirq, IRQ and NMI).
Also add some more comments to the code.
- Add "common_comm" field for histograms
Add "common_comm" that uses the current->comm as a field in an event
histogram and acts like any of the other fields of the event.
- Show "subops" in the enabled_functions file
When the function graph infrastructure is used, a subsystem has a
"subops" that it attaches its callback function to. Instead of the
enabled_functions just showing a function calling the function that
calls the subops functions, also show the subops functions that will
get called for that function too.
- Add "copy_trace_marker" option to instances
There are cases where an instance is created for tooling to write
into, but the old tooling has the top level instance hardcoded into
the application. New tools want to consume the data from an instance
and not the top level buffer. By adding a copy_trace_marker option,
whenever the top instance trace_marker is written into, a copy of it
is also written into the instance with this option set. This allows
new tools to read what old tools are writing into the top buffer.
If this option is cleared by the top instance, then what is written
into the trace_marker is not written into the top instance. This is a
way to redirect the trace_marker writes into another instance.
- Have tracepoints created by DECLARE_TRACE() use trace_<name>_tp()
If a tracepoint is created by DECLARE_TRACE() instead of
TRACE_EVENT(), then it will not be exposed via tracefs. Currently
there's no way to differentiate in the kernel the tracepoint
functions between those that are exposed via tracefs or not. A
calling convention has been made manually to append a "_tp" prefix
for events created by DECLARE_TRACE(). Instead of doing this
manually, force it so that all DECLARE_TRACE() events have this
notation.
- Use __string() for task->comm in some sched events
Instead of hardcoding the comm to be TASK_COMM_LEN in some of the
scheduler events use __string() which makes it dynamic. Note, if
these events are parsed by user space it they may break, and the
event may have to be converted back to the hardcoded size.
- Have function graph "depth" be unsigned to the user
Internally to the kernel, the "depth" field of the function graph
event is signed due to -1 being used for end of boundary. What
actually gets recorded in the event itself is zero or positive.
Reflect this to user space by showing "depth" as unsigned int and be
consistent across all events.
- Allow an arbitrary long CPU string to osnoise_cpus_write()
The filtering of which CPUs to write to can exceed 256 bytes. If a
machine has 256 CPUs, and the filter is to filter every other CPU,
the write would take a string larger than 256 bytes. Instead of using
a fixed size buffer on the stack that is 256 bytes, allocate it to
handle what is passed in.
- Stop having ftrace check the per-cpu data "disabled" flag
The "disabled" flag in the data structure passed to most ftrace
functions is checked to know if tracing has been disabled or not.
This flag was added back in 2008 before the ring buffer had its own
way to disable tracing. The "disable" flag is now not always set when
needed, and the ring buffer flag should be used in all locations
where the disabled is needed. Since the "disable" flag is redundant
and incorrect, stop using it. Fix up some locations that use the
"disable" flag to use the ring buffer info.
- Use a new tracer_tracing_disable/enable() instead of data->disable
flag
There's a few cases that set the data->disable flag to stop tracing,
but this flag is not consistently used. It is also an on/off switch
where if a function set it and calls another function that sets it,
the called function may incorrectly enable it.
Use a new trace_tracing_disable() and tracer_tracing_enable() that
uses a counter and can be nested. These use the ring buffer flags
which are always checked making the disabling more consistent.
- Save the trace clock in the persistent ring buffer
Save what clock was used for tracing in the persistent ring buffer
and set it back to that clock after a reboot.
- Remove unused reference to a per CPU data pointer in mmiotrace
functions
- Remove unused buffer_page field from trace_array_cpu structure
- Remove more strncpy() instances
- Other minor clean ups and fixes
* tag 'trace-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (36 commits)
tracing: Fix compilation warning on arm32
tracing: Record trace_clock and recover when reboot
tracing/sched: Use __string() instead of fixed lengths for task->comm
tracepoint: Have tracepoints created with DECLARE_TRACE() have _tp suffix
tracing: Cleanup upper_empty() in pid_list
tracing: Allow the top level trace_marker to write into another instances
tracing: Add a helper function to handle the dereference arg in verifier
tracing: Remove unnecessary "goto out" that simply returns ret is trigger code
tracing: Fix error handling in event_trigger_parse()
tracing: Rename event_trigger_alloc() to trigger_data_alloc()
tracing: Replace deprecated strncpy() with strscpy() for stack_trace_filter_buf
tracing: Remove unused buffer_page field from trace_array_cpu structure
tracing: Use atomic_inc_return() for updating "disabled" counter in irqsoff tracer
tracing: Convert the per CPU "disabled" counter to local from atomic
tracing: branch: Use trace_tracing_is_on_cpu() instead of "disabled" field
ring-buffer: Add ring_buffer_record_is_on_cpu()
tracing: Do not use per CPU array_buffer.data->disabled for cpumask
ftrace: Do not disabled function graph based on "disabled" field
tracing: kdb: Use tracer_tracing_on/off() instead of setting per CPU disabled
tracing: Use tracer_tracing_disable() instead of "disabled" field for ftrace_dump_one()
...
Pull bpf updates from Alexei Starovoitov:
- Fix and improve BTF deduplication of identical BTF types (Alan
Maguire and Andrii Nakryiko)
- Support up to 12 arguments in BPF trampoline on arm64 (Xu Kuohai and
Alexis Lothoré)
- Support load-acquire and store-release instructions in BPF JIT on
riscv64 (Andrea Parri)
- Fix uninitialized values in BPF_{CORE,PROBE}_READ macros (Anton
Protopopov)
- Streamline allowed helpers across program types (Feng Yang)
- Support atomic update for hashtab of BPF maps (Hou Tao)
- Implement json output for BPF helpers (Ihor Solodrai)
- Several s390 JIT fixes (Ilya Leoshkevich)
- Various sockmap fixes (Jiayuan Chen)
- Support mmap of vmlinux BTF data (Lorenz Bauer)
- Support BPF rbtree traversal and list peeking (Martin KaFai Lau)
- Tests for sockmap/sockhash redirection (Michal Luczaj)
- Introduce kfuncs for memory reads into dynptrs (Mykyta Yatsenko)
- Add support for dma-buf iterators in BPF (T.J. Mercier)
- The verifier support for __bpf_trap() (Yonghong Song)
* tag 'bpf-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (135 commits)
bpf, arm64: Remove unused-but-set function and variable.
selftests/bpf: Add tests with stack ptr register in conditional jmp
bpf: Do not include stack ptr register in precision backtracking bookkeeping
selftests/bpf: enable many-args tests for arm64
bpf, arm64: Support up to 12 function arguments
bpf: Check rcu_read_lock_trace_held() in bpf_map_lookup_percpu_elem()
bpf: Avoid __bpf_prog_ret0_warn when jit fails
bpftool: Add support for custom BTF path in prog load/loadall
selftests/bpf: Add unit tests with __bpf_trap() kfunc
bpf: Warn with __bpf_trap() kfunc maybe due to uninitialized variable
bpf: Remove special_kfunc_set from verifier
selftests/bpf: Add test for open coded dmabuf_iter
selftests/bpf: Add test for dmabuf_iter
bpf: Add open coded dmabuf iterator
bpf: Add dmabuf iterator
dma-buf: Rename debugfs symbols
bpf: Fix error return value in bpf_copy_from_user_dynptr
libbpf: Use mmap to parse vmlinux BTF from sysfs
selftests: bpf: Add a test for mmapable vmlinux BTF
btf: Allow mmap of vmlinux btf
...
On arm32, size_t is defined to be unsigned int, while PAGE_SIZE is
unsigned long. This hence triggers a compilation warning as min()
asserts the type of two operands to be equal. Casting PAGE_SIZE to size_t
solves this issue and works on other target architectures as well.
Compilation warning details:
kernel/trace/trace.c: In function 'tracing_splice_read_pipe':
./include/linux/minmax.h:20:28: warning: comparison of distinct pointer types lacks a cast
(!!(sizeof((typeof(x) *)1 == (typeof(y) *)1)))
^
./include/linux/minmax.h:26:4: note: in expansion of macro '__typecheck'
(__typecheck(x, y) && __no_side_effects(x, y))
^~~~~~~~~~~
...
kernel/trace/trace.c:6771:8: note: in expansion of macro 'min'
min((size_t)trace_seq_used(&iter->seq),
^~~
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250526013731.1198030-1-pantaixi@huaweicloud.com
Fixes: f5178c41bb ("tracing: Fix oob write in trace_seq_to_buffer()")
Reviewed-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Pan Taixi <pantaixi@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull sysctl updates from Joel Granados:
- Move kern_table members out of kernel/sysctl.c
Moved a subset (tracing, panic, signal, stack_tracer and sparc) out
of the kern_table array. The goal is for kern_table to only have
sysctl elements. All this increases modularity by placing the
ctl_tables closer to where they are used while reducing the chances
of merge conflicts in kernel/sysctl.c.
- Fixed sysctl unit test panic by relocating it to selftests
* tag 'sysctl-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl:
sysctl: Close test ctl_headers with a for loop
sysctl: call sysctl tests with a for loop
sysctl: Add 0012 to test the u8 range check
sysctl: move u8 register test to lib/test_sysctl.c
sparc: mv sparc sysctls into their own file under arch/sparc/kernel
stack_tracer: move sysctl registration to kernel/trace/trace_stack.c
tracing: Move trace sysctls into trace.c
signal: Move signal ctl tables into signal.c
panic: Move panic ctl tables into panic.c
Pull block updates from Jens Axboe:
- ublk updates:
- Add support for updating the size of a ublk instance
- Zero-copy improvements
- Auto-registering of buffers for zero-copy
- Series simplifying and improving GET_DATA and request lookup
- Series adding quiesce support
- Lots of selftests additions
- Various cleanups
- NVMe updates via Christoph:
- add per-node DMA pools and use them for PRP/SGL allocations
(Caleb Sander Mateos, Keith Busch)
- nvme-fcloop refcounting fixes (Daniel Wagner)
- support delayed removal of the multipath node and optionally
support the multipath node for private namespaces (Nilay Shroff)
- support shared CQs in the PCI endpoint target code (Wilfred
Mallawa)
- support admin-queue only authentication (Hannes Reinecke)
- use the crc32c library instead of the crypto API (Eric Biggers)
- misc cleanups (Christoph Hellwig, Marcelo Moreira, Hannes
Reinecke, Leon Romanovsky, Gustavo A. R. Silva)
- MD updates via Yu:
- Fix that normal IO can be starved by sync IO, found by mkfs on
newly created large raid5, with some clean up patches for bdev
inflight counters
- Clean up brd, getting rid of atomic kmaps and bvec poking
- Add loop driver specifically for zoned IO testing
- Eliminate blk-rq-qos calls with a static key, if not enabled
- Improve hctx locking for when a plug has IO for multiple queues
pending
- Remove block layer bouncing support, which in turn means we can
remove the per-node bounce stat as well
- Improve blk-throttle support
- Improve delay support for blk-throttle
- Improve brd discard support
- Unify IO scheduler switching. This should also fix a bunch of lockdep
warnings we've been seeing, after enabling lockdep support for queue
freezing/unfreezeing
- Add support for block write streams via FDP (flexible data placement)
on NVMe
- Add a bunch of block helpers, facilitating the removal of a bunch of
duplicated boilerplate code
- Remove obsolete BLK_MQ pci and virtio Kconfig options
- Add atomic/untorn write support to blktrace
- Various little cleanups and fixes
* tag 'for-6.16/block-20250523' of git://git.kernel.dk/linux: (186 commits)
selftests: ublk: add test for UBLK_F_QUIESCE
ublk: add feature UBLK_F_QUIESCE
selftests: ublk: add test case for UBLK_U_CMD_UPDATE_SIZE
traceevent/block: Add REQ_ATOMIC flag to block trace events
ublk: run auto buf unregisgering in same io_ring_ctx with registering
io_uring: add helper io_uring_cmd_ctx_handle()
ublk: remove io argument from ublk_auto_buf_reg_fallback()
ublk: handle ublk_set_auto_buf_reg() failure correctly in ublk_fetch()
selftests: ublk: add test for covering UBLK_AUTO_BUF_REG_FALLBACK
selftests: ublk: support UBLK_F_AUTO_BUF_REG
ublk: support UBLK_AUTO_BUF_REG_FALLBACK
ublk: register buffer to local io_uring with provided buf index via UBLK_F_AUTO_BUF_REG
ublk: prepare for supporting to register request buffer automatically
ublk: convert to refcount_t
selftests: ublk: make IO & device removal test more stressful
nvme: rename nvme_mpath_shutdown_disk to nvme_mpath_remove_disk
nvme: introduce multipath_always_on module param
nvme-multipath: introduce delayed removal of the multipath head node
nvme-pci: derive and better document max segments limits
nvme-pci: use struct_size for allocation struct nvme_dev
...
Filesystems like XFS can implement atomic write I/O using either
REQ_ATOMIC flag set in the bio or via CoW operation. It will be useful
if we have a flag in trace events to distinguish between the two. This
patch adds char 'U' (Untorn writes) to rwbs field of the trace events
if REQ_ATOMIC flag is set in the bio.
<W/ REQ_ATOMIC>
=================
xfs_io-4238 [009] ..... 4148.126843: block_rq_issue: 259,0 WFSU 16384 () 768 + 32 none,0,0 [xfs_io]
<idle>-0 [009] d.h1. 4148.129864: block_rq_complete: 259,0 WFSU () 768 + 32 none,0,0 [0]
<W/O REQ_ATOMIC>
===============
xfs_io-4237 [010] ..... 4143.325616: block_rq_issue: 259,0 WS 16384 () 768 + 32 none,0,0 [xfs_io]
<idle>-0 [010] d.H1. 4143.329138: block_rq_complete: 259,0 WS () 768 + 32 none,0,0 [0]
Signed-off-by: Ritesh Harjani (IBM) <ritesh.list@gmail.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://lore.kernel.org/r/44317cb2ec4588f6a2c1501a96684e6a1196e8ba.1747921498.git.ritesh.list@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit 4a8f635a60.
Althought get_pid_task() internally already calls rcu_read_lock() and
rcu_read_unlock(), the find_vpid() was not.
The documentation for find_vpid() clearly states:
"Must be called with the tasklist_lock or rcu_read_lock() held."
Add proper rcu_read_lock/unlock() to protect the find_vpid().
Fixes: 4a8f635a60 ("bpf: remove unnecessary rcu_read_{lock,unlock}() in multi-uprobe attach logic")
Reported-by: Xuewen Yan <xuewen.yan@unisoc.com>
Signed-off-by: Di Shen <di.shen@unisoc.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250520054943.5002-1-xuewen.yan@unisoc.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull tracing fixes from Steven Rostedt:
- Fix sample code that uses trace_array_printk()
The sample code for in kernel use of trace_array (that creates an
instance for use within the kernel) and shows how to use
trace_array_printk() that writes into the created instance, used
trace_printk_init_buffers(). But that function is used to initialize
normal trace_printk() and produces the NOTICE banner which is not
needed for use of trace_array_printk(). The function to initialize
that is trace_array_init_printk() that takes the created trace array
instance as a parameter.
Update the sample code to reflect the proper usage.
- Fix preemption count output for stacktrace event
The tracing buffer shows the preempt count level when an event
executes. Because writing the event itself disables preemption, this
needs to be accounted for when recording. The stacktrace event did
not account for this so the output of the stacktrace event showed
preemption was disabled while the event that triggered the stacktrace
shows preemption is enabled and this leads to confusion. Account for
preemption being disabled for the stacktrace event.
The same happened for stack traces triggered by function tracer.
- Fix persistent ring buffer when trace_pipe is used
The ring buffer swaps the reader page with the next page to read from
the write buffer when trace_pipe is used. If there's only a page of
data in the ring buffer, this swap will cause the "commit" pointer
(last data written) to be on the reader page. If more data is written
to the buffer, it is added to the reader page until it falls off back
into the write buffer.
If the system reboots and the commit pointer is still on the reader
page, even if new data was written, the persistent buffer validator
will miss finding the commit pointer because it only checks the write
buffer and does not check the reader page. This causes the validator
to fail the validation and clear the buffer, where the new data is
lost.
There was a check for this, but it checked the "head pointer", which
was incorrect, because the "head pointer" always stays on the write
buffer and is the next page to swap out for the reader page. Fix the
logic to catch this case and allow the user to still read the data
after reboot.
* tag 'trace-v6.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Fix persistent buffer when commit page is the reader page
ftrace: Fix preemption accounting for stacktrace filter command
ftrace: Fix preemption accounting for stacktrace trigger command
tracing: samples: Initialize trace_array_printk() with the correct function
The ring buffer is made up of sub buffers (sometimes called pages as they
are by default PAGE_SIZE). It has the following "pages":
"tail page" - this is the page that the next write will write to
"head page" - this is the page that the reader will swap the reader page with.
"reader page" - This belongs to the reader, where it will swap the head
page from the ring buffer so that the reader does not
race with the writer.
The writer may end up on the "reader page" if the ring buffer hasn't
written more than one page, where the "tail page" and the "head page" are
the same.
The persistent ring buffer has meta data that points to where these pages
exist so on reboot it can re-create the pointers to the cpu_buffer
descriptor. But when the commit page is on the reader page, the logic is
incorrect.
The check to see if the commit page is on the reader page checked if the
head page was the reader page, which would never happen, as the head page
is always in the ring buffer. The correct check would be to test if the
commit page is on the reader page. If that's the case, then it can exit
out early as the commit page is only on the reader page when there's only
one page of data in the buffer. There's no reason to iterate the ring
buffer pages to find the "commit page" as it is already found.
To trigger this bug:
# echo 1 > /sys/kernel/tracing/instances/boot_mapped/events/syscalls/sys_enter_fchownat/enable
# touch /tmp/x
# chown sshd /tmp/x
# reboot
On boot up, the dmesg will have:
Ring buffer meta [0] is from previous boot!
Ring buffer meta [1] is from previous boot!
Ring buffer meta [2] is from previous boot!
Ring buffer meta [3] is from previous boot!
Ring buffer meta [4] commit page not found
Ring buffer meta [5] is from previous boot!
Ring buffer meta [6] is from previous boot!
Ring buffer meta [7] is from previous boot!
Where the buffer on CPU 4 had a "commit page not found" error and that
buffer is cleared and reset causing the output to be empty and the data lost.
When it works correctly, it has:
# cat /sys/kernel/tracing/instances/boot_mapped/trace_pipe
<...>-1137 [004] ..... 998.205323: sys_enter_fchownat: __syscall_nr=0x104 (260) dfd=0xffffff9c (4294967196) filename=(0xffffc90000a0002c) user=0x3e8 (1000) group=0xffffffff (4294967295) flag=0x0 (0
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250513115032.3e0b97f7@gandalf.local.home
Fixes: 5f3b6e839f ("ring-buffer: Validate boot range memory events")
Reported-by: Tasos Sahanidis <tasos@tasossah.com>
Tested-by: Tasos Sahanidis <tasos@tasossah.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When using the stacktrace trigger command to trace syscalls, the
preemption count was consistently reported as 1 when the system call
event itself had 0 (".").
For example:
root@ubuntu22-vm:/sys/kernel/tracing/events/syscalls/sys_enter_read
$ echo stacktrace > trigger
$ echo 1 > enable
sshd-416 [002] ..... 232.864910: sys_read(fd: a, buf: 556b1f3221d0, count: 8000)
sshd-416 [002] ...1. 232.864913: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
The root cause is that the trace framework disables preemption in __DO_TRACE before
invoking the trigger callback.
Use the tracing_gen_ctx_dec() that will accommodate for the increase of
the preemption count in __DO_TRACE when calling the callback. The result
is the accurate reporting of:
sshd-410 [004] ..... 210.117660: sys_read(fd: 4, buf: 559b725ba130, count: 40000)
sshd-410 [004] ..... 210.117662: <stack trace>
=> ftrace_syscall_enter
=> syscall_trace_enter
=> do_syscall_64
=> entry_SYSCALL_64_after_hwframe
Cc: stable@vger.kernel.org
Fixes: ce33c845b0 ("tracing: Dump stacktrace trigger to the corresponding instance")
Link: https://lore.kernel.org/20250512094246.1167956-1-dolinux.peng@gmail.com
Signed-off-by: pengdonglin <dolinux.peng@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since the shared trace_probe_log variable can be accessed and
modified via probe event create operation of kprobe_events,
uprobe_events, and dynamic_events, it should be protected.
In the dynamic_events, all operations are serialized by
`dyn_event_ops_mutex`. But kprobe_events and uprobe_events
interfaces are not serialized.
To solve this issue, introduces dyn_event_create(), which runs
create() operation under the mutex, for kprobe_events and
uprobe_events. This also uses lockdep to check the mutex is
held when using trace_probe_log* APIs.
Link: https://lore.kernel.org/all/174684868120.551552.3068655787654268804.stgit@devnote2/
Reported-by: Paul Cacheux <paulcacheux@gmail.com>
Closes: https://lore.kernel.org/all/20250510074456.805a16872b591e2971a4d221@kernel.org/
Fixes: ab105a4fb8 ("tracing: Use tracing error_log with probe events")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
This patch introduces a new set of kfuncs for working with dynptrs in
BPF programs, enabling reading variable-length user or kernel data
into dynptr directly. To enable memory-safety, verifier allows only
constant-sized reads via existing bpf_probe_read_{user|kernel} etc.
kfuncs, dynptr-based kfuncs allow dynamically-sized reads without memory
safety shortcomings.
The following kfuncs are introduced:
* `bpf_probe_read_kernel_dynptr()`: probes kernel-space data into a dynptr
* `bpf_probe_read_user_dynptr()`: probes user-space data into a dynptr
* `bpf_probe_read_kernel_str_dynptr()`: probes kernel-space string into
a dynptr
* `bpf_probe_read_user_str_dynptr()`: probes user-space string into a
dynptr
* `bpf_copy_from_user_dynptr()`: sleepable, copies user-space data into
a dynptr for the current task
* `bpf_copy_from_user_str_dynptr()`: sleepable, copies user-space string
into a dynptr for the current task
* `bpf_copy_from_user_task_dynptr()`: sleepable, copies user-space data
of the task into a dynptr
* `bpf_copy_from_user_task_str_dynptr()`: sleepable, copies user-space
string of the task into a dynptr
The implementation is built on two generic functions:
* __bpf_dynptr_copy
* __bpf_dynptr_copy_str
These functions take function pointers as arguments, enabling the
copying of data from various sources, including both kernel and user
space.
Use __always_inline for generic functions and callbacks to make sure the
compiler doesn't generate indirect calls into callbacks, which is more
expensive, especially on some kernel configurations. Inlining allows
compiler to put direct calls into all the specific callback implementations
(copy_user_data_sleepable, copy_user_data_nofault, and so on).
Reviewed-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20250512205348.191079-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When CONFIG_PROVE_RCU_LIST is enabled, fprobe triggers the following
warning:
WARNING: suspicious RCU usage
kernel/trace/fprobe.c:457 RCU-list traversed in non-reader section!!
other info that might help us debug this:
#1: ffffffff863c4e08 (fprobe_mutex){+.+.}-{4:4}, at: fprobe_module_callback+0x7b/0x8c0
Call Trace:
fprobe_module_callback
notifier_call_chain
blocking_notifier_call_chain
This warning occurs because fprobe_remove_node_in_module() traverses an
RCU list using RCU primitives without holding an RCU read lock. However,
the function is only called from fprobe_module_callback(), which holds
the fprobe_mutex lock that provides sufficient protection for safely
traversing the list.
Fix the warning by specifying the locking design to the
CONFIG_PROVE_RCU_LIST mechanism. Add the lockdep_is_held() argument to
hlist_for_each_entry_rcu() to inform the RCU checker that fprobe_mutex
provides the required protection.
Link: https://lore.kernel.org/all/20250410-fprobe-v1-1-068ef5f41436@debian.org/
Fixes: a3dc2983ca ("tracing: fprobe: Cleanup fprobe hash when module unloading")
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Antonio Quartulli <antonio@mandelbit.com>
Tested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
There are applications that have it hard coded to write into the top level
trace_marker instance (/sys/kernel/tracing/trace_marker). This can be
annoying if a profiler is using that instance for other work, or if it
needs all writes to go into a new instance.
A new option is created called "copy_trace_marker". By default, the top
level has this set, as that is the default buffer that writing into the
top level trace_marker file will go to. But now if an instance is created
and sets this option, all writes into the top level trace_marker will also
be written into that instance buffer just as if an application were to
write into the instance's trace_marker file.
If the top level instance disables this option, then writes to its own
trace_marker and trace_marker_raw files will not go into its buffer.
If no instance has this option set, then the write will return an error
and errno will contain ENODEV.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250508095639.39f84eda@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function event_trigger_alloc() creates an event_trigger_data
descriptor and states that it needs to be freed via event_trigger_free().
This is incorrect, it needs to be freed by trigger_data_free() as
event_trigger_free() adds ref counting.
Rename event_trigger_alloc() to trigger_data_alloc() and state that it
needs to be freed via trigger_data_free(). This naming convention
was introducing bugs.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250507145455.776436410@goodmis.org
Fixes: 86599dbe2c ("tracing: Add helper functions to simplify event_command.parse() callback handling")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
Do not bother setting the per CPU disabled flag of the array_buffer data
to use to determine what CPUs can write to the buffer and only rely on the
ring buffer code itself to disabled it.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.885452497@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
Do not bother disabling the function graph tracer if the per CPU disabled
field is set. Just record as normal. If tracing is disabled in the ring
buffer it will not be recorded.
Also, when tracing is enabled again, it will not drop the return call of
the function.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.715752008@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
The kdb_ftdump() function iterates over all the current tracing CPUs and
increments the "disabled" counter before doing the dump, and decrements it
afterward.
As the disabled flag can be ignored, doing this today is not reliable.
Instead, simply call tracer_tracing_off() and then tracer_tracing_on() to
disable and then enabled the entire ring buffer in one go!
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Thompson <danielt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/20250505212235.549033722@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
The ftrace_dump_one() function iterates over all the current tracing CPUs and
increments the "disabled" counter before doing the dump, and decrements it
afterward.
As the disabled flag can be ignored, doing this today is not reliable.
Instead use the new tracer_tracing_disable() that calls into the ring
buffer code to do the disabling.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.381188238@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allow a tracer to disable writing to its buffer for a temporary amount of
time and re-enable it.
The tracer_tracing_disable() will disable writing to the trace array
buffer, and requires a tracer_tracing_enable() to re-enable it.
The difference between tracer_tracing_disable() and tracer_tracing_off()
is that the disable version can nest, and requires as many enable() calls
as disable() calls to re-enable the buffer. Where as the off() function
can be called multiple times and only requires a singe tracer_tracing_on()
to re-enable the buffer.
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Daniel Thompson <danielt@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/20250505212235.210330010@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ignore_pid boolean on the per CPU data descriptor is updated at
sched_switch when a new task is scheduled in. If the new task is to be
ignored, it is set to true, otherwise it is set to false. The current task
should always have the correct value as it is updated when the task is
scheduled in.
Instead of breaking up the read of this value, which requires preemption
to be disabled, just use this_cpu_read() which gives a snapshot of the
value. Since the value will always be correct for a given task (because
it's updated at sched switch) it doesn't need preemption disabled.
This will also allow trace events to be called with preemption enabled.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212235.038958766@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The per CPU "disabled" value was the original way to disable tracing when
the tracing subsystem was first created. Today, the ring buffer
infrastructure has its own way to disable tracing. In fact, things have
changed so much since 2008 that many things ignore the disable flag.
There's no reason for the function tracer to check it, if tracing is
disabled, the ring buffer will not record the event anyway.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250505212234.868972758@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Allocate kernel memory for processing CPU string
(/sys/kernel/tracing/osnoise/cpus) also in osnoise_cpus_write to allow
the writing of a CPU string of an arbitrary length.
This replaces the 256-byte buffer, which is insufficient with the rising
number of CPUs. For example, if I wanted to measure on every even CPU
on a system with 256 CPUs, the string would be 456 characters long.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250425091839.343289-1-tglozar@redhat.com
Signed-off-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The structure ftrace_func_mapper only contains a single field and that is
a ftrace_hash. It is used to abstract it out from a normal hash to control
users of how it gets modified.
The freeing of a ftrace_func_mapper structure is:
free_ftrace_hash(&mapper->hash);
Without context, this looks like a bug. It should be commented that it is
not a bug and it is freed this way.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Link: https://lore.kernel.org/20250416165420.5c717420@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The function graph infrastructure uses subops of the function tracer.
These are not shown in enabled_functions. Add a "subops:" section to the
enabled_functions line to show what functions are attached via subops. If
the subops is from the function_graph infrastructure, then show the entry
and return callbacks that are attached.
Here's an example of the output:
schedule_on_each_cpu (1) tramp: 0xffffffffc03ef000 (ftrace_graph_func+0x0/0x60) ->ftrace_graph_func+0x0/0x60 subops: {ent:trace_graph_entry+0x0/0x20 ret:trace_graph_return+0x0/0x150}
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250410153830.5d97f108@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
If one wants to trace the name of the task that wakes up a process and
pass that to the synthetic events, there's nothing currently that lets the
synthetic events do that. Add a "common_comm" to the histogram logic that
allows histograms save the current->comm as a variable that can be passed
through and added to a synthetic event:
# cd /sys/kernel/tracing
# echo 's:wake_lat char[] waker; char[] wakee; u64 delta;' >> dynamic_events
# echo 'hist:keys=pid:comm=common_comm:ts=common_timestamp.usecs if !(common_flags & 0x18)' > events/sched/sched_waking/trigger
# echo 'hist:keys=next_pid:wake_comm=$comm:delta=common_timestamp.usecs-$ts:onmatch(sched.sched_waking).trace(wake_lat,$wake_comm,next_comm,$delta)' > events/sched/sched_switch/trigger
The above will create a synthetic trace event that will save both the name
of the waker and the wakee but only if the wakeup did not happen in a hard
or soft interrupt context.
The "common_comm" is used to save the task->comm at the time of the
initial event and is passed via the "comm" variable to the second event,
and that is saved as the "waker" field in the "wake_lat" synthetic event.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250407154912.3c6c6246@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The histogram trigger has three somewhat large arrays on the kernel stack:
unsigned long entries[HIST_STACKTRACE_DEPTH];
u64 var_ref_vals[TRACING_MAP_VARS_MAX];
char compound_key[HIST_KEY_SIZE_MAX];
Checking the function event_hist_trigger() stack frame size, it currently
uses 816 bytes for its stack frame due to these variables!
Instead, allocate a per CPU structure that holds these arrays for each
context level (normal, softirq, irq and NMI). That is, each CPU will have
4 of these structures. This will be allocated when the first histogram
trigger is enabled and freed when the last is disabled. When the
histogram callback triggers, it will request this structure. The request
will disable preemption, get the per CPU structure at the index of the
per CPU variable, and increment that variable.
The callback will use the arrays in this structure to perform its work and
then release the structure. That in turn will simply decrement the per CPU
index and enable preemption.
Moving the variables from the kernel stack to the per CPU structure brings
the stack frame of event_hist_trigger() down to just 112 bytes.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Link: https://lore.kernel.org/20250407123851.74ea8d58@gandalf.local.home
Fixes: 067fe038e7 ("tracing: Add variable reference handling to hist triggers")
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The add_to_key() function tests if the key is a string or some data. If
it's a string it does some further calculations of the string size (still
truncating it to the max size it can be), and calls strncpy().
If the key isn't as string it calls memcpy(). The interesting point is
that both use the exact same parameters:
strncpy(compound_key + key_field->offset, (char *)key, size);
} else
memcpy(compound_key + key_field->offset, key, size);
As strncpy() is being used simply as a memcpy() for a string, and since
strncpy() is deprecated, just call memcpy() for both memory and string
keys.
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/20250403210637.1c477d4a@gandalf.local.home
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When the "fields" option is set in a trace instance, it ignores the "print fmt"
portion of the trace event and just prints the raw fields defined by the
TP_STRUCT__entry() of the TRACE_EVENT() macro.
The preempt_disable/enable and irq_disable/enable events record only the
caller offset from _stext to save space in the ring buffer. Even though
the "fields" option only prints the fields, it also tries to print what
they represent too, which includes function names.
Add a check in the output of the event field printing to see if the field
name is "caller_offs" or "parent_offs" and then print the function at the
offset from _stext of that field.
Instead of just showing:
irq_disable: caller_offs=0xba634d (12215117) parent_offs=0x39d10e2 (60625122)
Show:
irq_disable: caller_offs=trace_hardirqs_off.part.0+0xad/0x130 0xba634d (12215117) parent_offs=_raw_spin_lock_irqsave+0x62/0x70 0x39d10e2 (60625122)
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20250506105131.4b6089a9@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The trace_adjust_address() will take a given address and examine the
persistent ring buffer to see if the address matches a module that is
listed there. If it does not, it will just adjust the value to the core
kernel delta. But if the address was for something that was not part of
the core kernel text or data it should not be adjusted.
Check the result of the adjustment and only return the adjustment if it
lands in the current kernel text or data. If not, return the original
address.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Link: https://lore.kernel.org/20250506102300.0ba2f9e0@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
