Introduce bpf_async_update_prog_callback(): lock-free update of cb->prog
and cb->callback_fn. This function allows updating prog and callback_fn
fields of the struct bpf_async_cb without holding lock.
For now use it under the lock from __bpf_async_set_callback(), in the
next patches that lock will be removed.
Lock-free algorithm:
* Acquire a guard reference on prog to prevent it from being freed
during the retry loop.
* Retry loop:
1. Each iteration acquires a new prog reference and stores it
in cb->prog via xchg. The previous prog is released.
2. The loop condition checks if both cb->prog and cb->callback_fn
match what we just wrote. If either differs, a concurrent writer
overwrote our value, and we must retry.
3. When we retry, our previously-stored prog was already released by
the concurrent writer or will be released by us after
overwriting.
* Release guard reference.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Link: https://lore.kernel.org/r/20260120-timer_nolock-v6-3-670ffdd787b4@meta.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
After commit 37cce22dbd ("bpf: verifier: Refactor helper access type tracking"),
the verifier started relying on the access type flags in helper
function prototypes to perform memory access optimizations.
Currently, several helper functions utilizing ARG_PTR_TO_MEM lack the
corresponding MEM_RDONLY or MEM_WRITE flags. This omission causes the
verifier to incorrectly assume that the buffer contents are unchanged
across the helper call. Consequently, the verifier may optimize away
subsequent reads based on this wrong assumption, leading to correctness
issues.
For bpf_get_stack_proto_raw_tp, the original MEM_RDONLY was incorrect
since the helper writes to the buffer. Change it to ARG_PTR_TO_UNINIT_MEM
which correctly indicates write access to potentially uninitialized memory.
Similar issues were recently addressed for specific helpers in commit
ac44dcc788 ("bpf: Fix verifier assumptions of bpf_d_path's output buffer")
and commit 2eb7648558 ("bpf: Specify access type of bpf_sysctl_get_name args").
Fix these prototypes by adding the correct memory access flags.
Fixes: 37cce22dbd ("bpf: verifier: Refactor helper access type tracking")
Co-developed-by: Shuran Liu <electronlsr@gmail.com>
Signed-off-by: Shuran Liu <electronlsr@gmail.com>
Co-developed-by: Peili Gao <gplhust955@gmail.com>
Signed-off-by: Peili Gao <gplhust955@gmail.com>
Co-developed-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Haoran Ni <haoran.ni.cs@gmail.com>
Signed-off-by: Zesen Liu <ftyghome@gmail.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260120-helper_proto-v3-1-27b0180b4e77@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
This patch implements range tracking (interval analysis) for BPF_DIV and
BPF_MOD operations when the divisor is a constant, covering both signed
and unsigned variants.
While LLVM typically optimizes integer division and modulo by constants
into multiplication and shift sequences, this optimization is less
effective for the BPF target when dealing with 64-bit arithmetic.
Currently, the verifier does not track bounds for scalar division or
modulo, treating the result as "unbounded". This leads to false positive
rejections for safe code patterns.
For example, the following code (compiled with -O2):
```c
int test(struct pt_regs *ctx) {
char buffer[6] = {1};
__u64 x = bpf_ktime_get_ns();
__u64 res = x % sizeof(buffer);
char value = buffer[res];
bpf_printk("res = %llu, val = %d", res, value);
return 0;
}
```
Generates a raw `BPF_MOD64` instruction:
```asm
; __u64 res = x % sizeof(buffer);
1: 97 00 00 00 06 00 00 00 r0 %= 0x6
; char value = buffer[res];
2: 18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0x0 ll
4: 0f 01 00 00 00 00 00 00 r1 += r0
5: 91 14 00 00 00 00 00 00 r4 = *(s8 *)(r1 + 0x0)
```
Without this patch, the verifier fails with "math between map_value
pointer and register with unbounded min value is not allowed" because
it cannot deduce that `r0` is within [0, 5].
According to the BPF instruction set[1], the instruction's offset field
(`insn->off`) is used to distinguish between signed (`off == 1`) and
unsigned division (`off == 0`). Moreover, we also follow the BPF division
and modulo runtime behavior (semantics) to handle special cases, such as
division by zero and signed division overflow.
- UDIV: dst = (src != 0) ? (dst / src) : 0
- SDIV: dst = (src == 0) ? 0 : ((src == -1 && dst == LLONG_MIN) ? LLONG_MIN : (dst / src))
- UMOD: dst = (src != 0) ? (dst % src) : dst
- SMOD: dst = (src == 0) ? dst : ((src == -1 && dst == LLONG_MIN) ? 0: (dst s% src))
Here is the overview of the changes made in this patch (See the code comments
for more details and examples):
1. For BPF_DIV: Firstly check whether the divisor is zero. If so, set the
destination register to zero (matching runtime behavior).
For non-zero constant divisors: goto `scalar(32)?_min_max_(u|s)div` functions.
- General cases: compute the new range by dividing max_dividend and
min_dividend by the constant divisor.
- Overflow case (SIGNED_MIN / -1) in signed division: mark the result
as unbounded if the dividend is not a single number.
2. For BPF_MOD: Firstly check whether the divisor is zero. If so, leave the
destination register unchanged (matching runtime behavior).
For non-zero constant divisors: goto `scalar(32)?_min_max_(u|s)mod` functions.
- General case: For signed modulo, the result's sign matches the
dividend's sign. And the result's absolute value is strictly bounded
by `min(abs(dividend), abs(divisor) - 1)`.
- Special care is taken when the divisor is SIGNED_MIN. By casting
to unsigned before negation and subtracting 1, we avoid signed
overflow and correctly calculate the maximum possible magnitude
(`res_max_abs` in the code).
- "Small dividend" case: If the dividend is already within the possible
result range (e.g., [-2, 5] % 10), the operation is an identity
function, and the destination register remains unchanged.
3. In `scalar(32)?_min_max_(u|s)(div|mod)` functions: After updating current
range, reset other ranges and tnum to unbounded/unknown.
e.g., in `scalar_min_max_sdiv`, signed 64-bit range is updated. Then reset
unsigned 64-bit range and 32-bit range to unbounded, and tnum to unknown.
Exception: in BPF_MOD's "small dividend" case, since the result remains
unchanged, we do not reset other ranges/tnum.
4. Also updated existing selftests based on the expected BPF_DIV and
BPF_MOD behavior.
[1] https://www.kernel.org/doc/Documentation/bpf/standardization/instruction-set.rst
Co-developed-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Signed-off-by: Shenghao Yuan <shenghaoyuan0928@163.com>
Co-developed-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Tianci Cao <ziye@zju.edu.cn>
Signed-off-by: Yazhou Tang <tangyazhou518@outlook.com>
Tested-by: syzbot@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20260119085458.182221-2-tangyazhou@zju.edu.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Implement bpf_stream_vprintk with an implicit bpf_prog_aux argument,
and remote bpf_stream_vprintk_impl from the kernel.
Update the selftests to use the new API with implicit argument.
bpf_stream_vprintk macro is changed to use the new bpf_stream_vprintk
kfunc, and the extern definition of bpf_stream_vprintk_impl is
replaced accordingly.
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-11-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A kernel function bpf_foo marked with KF_IMPLICIT_ARGS flag is
expected to have two associated types in BTF:
* `bpf_foo` with a function prototype that omits implicit arguments
* `bpf_foo_impl` with a function prototype that matches the kernel
declaration of `bpf_foo`, but doesn't have a ksym associated with
its name
In order to support kfuncs with implicit arguments, the verifier has
to know how to resolve a call of `bpf_foo` to the correct BTF function
prototype and address.
To implement this, in add_kfunc_call() kfunc flags are checked for
KF_IMPLICIT_ARGS. For such kfuncs a BTF func prototype is adjusted to
the one found for `bpf_foo_impl` (func_name + "_impl" suffix, by
convention) function in BTF.
This effectively changes the signature of the `bpf_foo` kfunc in the
context of verification: from one without implicit args to the one
with full argument list.
The values of implicit arguments by design are provided by the
verifier, and so they can only be of particular types. In this patch
the only allowed implicit arg type is a pointer to struct
bpf_prog_aux.
In order for the verifier to correctly set an implicit bpf_prog_aux
arg value at runtime, is_kfunc_arg_prog() is extended to check for the
arg type. At a point when prog arg is determined in check_kfunc_args()
the kfunc with implicit args already has a prototype with full
argument list, so the existing value patch mechanism just works.
If a new kfunc with KF_IMPLICIT_ARG is declared for an existing kfunc
that uses a __prog argument (a legacy case), the prototype
substitution works in exactly the same way, assuming the kfunc follows
the _impl naming convention. The difference is only in how _impl
prototype is added to the BTF, which is not the verifier's
concern. See a subsequent resolve_btfids patch for details.
__prog suffix is still supported at this point, but will be removed in
a subsequent patch, after current users are moved to KF_IMPLICIT_ARGS.
Introduction of KF_IMPLICIT_ARGS revealed an issue with zero-extension
tracking, because an explicit rX = 0 in place of the verifier-supplied
argument is now absent if the arg is implicit (the BPF prog doesn't
pass a dummy NULL anymore). To mitigate this, reset the subreg_def of
all caller saved registers in check_kfunc_call() [1].
[1] https://lore.kernel.org/bpf/b4a760ef828d40dac7ea6074d39452bb0dc82caa.camel@gmail.com/
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-4-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
There is code duplication between add_kfunc_call() and
fetch_kfunc_meta() collecting information about a kfunc from BTF.
Introduce struct bpf_kfunc_meta to hold common kfunc BTF data and
implement fetch_kfunc_meta() to fill it in, instead of struct
bpf_kfunc_call_arg_meta directly.
Then use these in add_kfunc_call() and (new) fetch_kfunc_arg_meta()
functions, and fixup previous usages of fetch_kfunc_meta() to
fetch_kfunc_arg_meta().
Besides the code dedup, this change enables add_kfunc_call() to access
kfunc->flags.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-3-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
btf_kfunc_id_set_contains() is called by fetch_kfunc_meta() in the BPF
verifier to get the kfunc flags stored in the .BTF_ids ELF section.
If it returns NULL instead of a valid pointer, it's interpreted as an
illegal kfunc usage failing the verification.
There are two potential reasons for btf_kfunc_id_set_contains() to
return NULL:
1. Provided kfunc BTF id is not present in relevant kfunc id sets.
2. The kfunc is not allowed, as determined by the program type
specific filter [1].
The filter functions accept a pointer to `struct bpf_prog`, so they
might implicitly depend on earlier stages of verification, when
bpf_prog members are set.
For example, bpf_qdisc_kfunc_filter() in linux/net/sched/bpf_qdisc.c
inspects prog->aux->st_ops [2], which is initialized in:
check_attach_btf_id() -> check_struct_ops_btf_id()
So far this hasn't been an issue, because fetch_kfunc_meta() is the
only caller of btf_kfunc_id_set_contains().
However in subsequent patches of this series it is necessary to
inspect kfunc flags earlier in BPF verifier, in the add_kfunc_call().
To resolve this, refactor btf_kfunc_id_set_contains() into two
interface functions:
* btf_kfunc_flags() that simply returns pointer to kfunc_flags
without applying the filters
* btf_kfunc_is_allowed() that both checks for kfunc_flags existence
(which is a requirement for a kfunc to be allowed) and applies the
prog filters
See [3] for the previous version of this patch.
[1] https://lore.kernel.org/all/20230519225157.760788-7-aditi.ghag@isovalent.com/
[2] https://lore.kernel.org/all/20250409214606.2000194-4-ameryhung@gmail.com/
[3] https://lore.kernel.org/bpf/20251029190113.3323406-3-ihor.solodrai@linux.dev/
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Link: https://lore.kernel.org/r/20260120222638.3976562-2-ihor.solodrai@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sync_linked_regs() is called after a conditional jump to propagate new
bounds of a register to all its liked registers. But the verifier log
only prints the state of the register that is part of the conditional
jump.
Make sync_linked_regs() scratch the registers whose bounds have been
updated by propagation from a known register.
Before:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (35) if r0 >= 0x6 goto pc+1
After:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+2 ; R0=scalar(id=1+0,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (35) if r0 >= 0x6 goto pc+1
The conditional jump in 4 updates the bound of R1 and the new bounds are
propogated to R0 as it is linked with the same id, before this change,
verifier only printed the state for R1 but after it prints for both R0
and R1.
Suggested-by: Andrii Nakryiko <andrii.nakryiko@gmail.com>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20260116141436.3715322-1-puranjay@kernel.org
Add __force annotations to casts that convert between __user and kernel
address spaces. These casts are intentional:
- In bpf_send_signal_common(), the value is stored in si_value.sival_ptr
which is typed as void __user *, but the value comes from a BPF
program parameter.
- In the bpf_*_dynptr() kfuncs, user pointers are cast to const void *
before being passed to copy helper functions that correctly handle
the user address space through copy_from_user variants.
Without __force, sparse reports:
warning: cast removes address space '__user' of expression
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260115184509.3585759-1-mykyta.yatsenko5@gmail.com
Closes: https://lore.kernel.org/oe-kbuild-all/202601131740.6C3BdBaB-lkp@intel.com/
sync_linked_regs() copies the id of known_reg to reg when propagating
bounds of known_reg to reg using the off of known_reg, but when
known_reg was linked to reg like:
known_reg = reg ; both known_reg and reg get same id
known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST
now when a call to sync_linked_regs() happens, let's say with the following:
if known_reg >= 10 goto pc+2
known_reg's new bounds are propagated to reg but now reg gets
BPF_ADD_CONST from the copy.
This means if another link to reg is created like:
another_reg = reg ; another_reg should get the id of reg but
assign_scalar_id_before_mov() sees
BPF_ADD_CONST on reg and assigns a new id to it.
As reg has a new id now, known_reg's link to reg is broken. If we find
new bounds for known_reg, they will not be propagated to reg.
This can be seen in the selftest added in the next commit:
0: (85) call bpf_get_prandom_u32#7 ; R0=scalar()
1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff))
3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255)
6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff))
7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf))
8: (37) r0 /= 0
div by zero
When 4 is verified, r1's bounds are propagated to r0 but r0 also gets
BPF_ADD_CONST (bug).
When 5 is verified, r0 gets a new id (2) and its link with r1 is broken.
After 6 we know r1 has bounds [14, 259] and therefore r0 should have
bounds [10, 255], therefore the branch at 7 is always taken. But because
r0's id was changed to 2, r1's new bounds are not propagated to r0.
The verifier still thinks r0 has bounds [6, 255] before 7 and execution
can reach div by zero.
Fix this by preserving id in sync_linked_regs() like off and subreg_def.
Fixes: 98d7ca374b ("bpf: Track delta between "linked" registers.")
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20260115151143.1344724-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Mahe reported issue with bpf_override_return helper not working when
executed from kprobe.multi bpf program on arm.
The problem is that on arm we use alternate storage for pt_regs object
that is passed to bpf_prog_run and if any register is changed (which
is the case of bpf_override_return) it's not propagated back to actual
pt_regs object.
Fixing this by introducing and calling ftrace_partial_regs_update function
to propagate the values of changed registers (ip and stack).
Reported-by: Mahe Tardy <mahe.tardy@gmail.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/bpf/20260112121157.854473-1-jolsa@kernel.org
Cross-merge BPF and other fixes after downstream PR.
No conflicts.
Adjacent:
Auto-merging MAINTAINERS
Auto-merging Makefile
Auto-merging kernel/bpf/verifier.c
Auto-merging kernel/sched/ext.c
Auto-merging mm/memcontrol.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK in riscv JIT (Menglong
Dong)
- Fix reference count leak in bpf_prog_test_run_xdp() (Tetsuo Handa)
- Fix metadata size check in bpf_test_run() (Toke Høiland-Jørgensen)
- Check that BPF insn array is not allowed as a map for const strings
(Deepanshu Kartikey)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Fix reference count leak in bpf_prog_test_run_xdp()
bpf: Reject BPF_MAP_TYPE_INSN_ARRAY in check_reg_const_str()
selftests/bpf: Update xdp_context_test_run test to check maximum metadata size
bpf, test_run: Subtract size of xdp_frame from allowed metadata size
riscv, bpf: Fix incorrect usage of BPF_TRAMP_F_ORIG_STACK
The map_direct_value_addr() function of the instruction
array map incorrectly adds offset to the resulting address.
This is a bug, because later the resolve_pseudo_ldimm64()
function adds the offset. Fix it. Corresponding selftests
are added in a consequent commit.
Fixes: 493d9e0d60 ("bpf, x86: add support for indirect jumps")
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com>
Reviewed-by: Emil Tsalapatis <emil@etsalapatis.com>
Link: https://lore.kernel.org/r/20260111153047.8388-2-a.s.protopopov@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently, vmlinux and kernel module BTFs are unconditionally
sorted during the build phase, with named types placed at the
end. Thus, anonymous types should be skipped when starting the
search. In my vmlinux BTF, the number of anonymous types is
61,747, which means the loop count can be reduced by 61,747.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-9-dolinux.peng@gmail.com
This patch checks whether the BTF is sorted by name in ascending order.
If sorted, binary search will be used when looking up types.
Specifically, vmlinux and kernel module BTFs are always sorted during
the build phase with anonymous types placed before named types, so we
only need to identify the starting ID of named types.
Signed-off-by: Donglin Peng <pengdonglin@xiaomi.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20260109130003.3313716-8-dolinux.peng@gmail.com
cilium bpf_wiregard.bpf.c when compiled with -O1 fails to load
with the following verifier log:
192: (79) r2 = *(u64 *)(r10 -304) ; R2=pkt(r=40) R10=fp0 fp-304=pkt(r=40)
...
227: (85) call bpf_skb_store_bytes#9 ; R0=scalar()
228: (bc) w2 = w0 ; R0=scalar() R2=scalar(smin=0,smax=umax=0xffffffff,var_off=(0x0; 0xffffffff))
229: (c4) w2 s>>= 31 ; R2=scalar(smin=0,smax=umax=0xffffffff,smin32=-1,smax32=0,var_off=(0x0; 0xffffffff))
230: (54) w2 &= -134 ; R2=scalar(smin=0,smax=umax=umax32=0xffffff7a,smax32=0x7fffff7a,var_off=(0x0; 0xffffff7a))
...
232: (66) if w2 s> 0xffffffff goto pc+125 ; R2=scalar(smin=umin=umin32=0x80000000,smax=umax=umax32=0xffffff7a,smax32=-134,var_off=(0x80000000; 0x7fffff7a))
...
238: (79) r4 = *(u64 *)(r10 -304) ; R4=scalar() R10=fp0 fp-304=scalar()
239: (56) if w2 != 0xffffff78 goto pc+210 ; R2=0xffffff78 // -136
...
258: (71) r1 = *(u8 *)(r4 +0)
R4 invalid mem access 'scalar'
The error might confuse most bpf authors, since fp-304 slot had 'pkt'
pointer at insn 192 and became 'scalar' at 238. That happened because
bpf_skb_store_bytes() clears all packet pointers including those in
the stack. On the first glance it might look like a bug in the source
code, since ctx->data pointer should have been reloaded after the call
to bpf_skb_store_bytes().
The relevant part of cilium source code looks like this:
// bpf/lib/nodeport.h
int dsr_set_ipip6()
{
if (ctx_adjust_hroom(...))
return DROP_INVALID; // -134
if (ctx_store_bytes(...))
return DROP_WRITE_ERROR; // -141
return 0;
}
bool dsr_fail_needs_reply(int code)
{
if (code == DROP_FRAG_NEEDED) // -136
return true;
return false;
}
tail_nodeport_ipv6_dsr()
{
ret = dsr_set_ipip6(...);
if (!IS_ERR(ret)) {
...
} else {
if (dsr_fail_needs_reply(ret))
return dsr_reply_icmp6(...);
}
}
The code doesn't have arithmetic shift by 31 and it reloads ctx->data
every time it needs to access it. So it's not a bug in the source code.
The reason is DAGCombiner::foldSelectCCToShiftAnd() LLVM transformation:
// If this is a select where the false operand is zero and the compare is a
// check of the sign bit, see if we can perform the "gzip trick":
// select_cc setlt X, 0, A, 0 -> and (sra X, size(X)-1), A
// select_cc setgt X, 0, A, 0 -> and (not (sra X, size(X)-1)), A
The conditional branch in dsr_set_ipip6() and its return values
are optimized into BPF_ARSH plus BPF_AND:
227: (85) call bpf_skb_store_bytes#9
228: (bc) w2 = w0
229: (c4) w2 s>>= 31 ; R2=scalar(smin=0,smax=umax=0xffffffff,smin32=-1,smax32=0,var_off=(0x0; 0xffffffff))
230: (54) w2 &= -134 ; R2=scalar(smin=0,smax=umax=umax32=0xffffff7a,smax32=0x7fffff7a,var_off=(0x0; 0xffffff7a))
after insn 230 the register w2 can only be 0 or -134,
but the verifier approximates it, since there is no way to
represent two scalars in bpf_reg_state.
After fallthough at insn 232 the w2 can only be -134,
hence the branch at insn
239: (56) if w2 != -136 goto pc+210
should be always taken, and trapping insn 258 should never execute.
LLVM generated correct code, but the verifier follows impossible
path and rejects valid program. To fix this issue recognize this
special LLVM optimization and fork the verifier state.
So after insn 229: (c4) w2 s>>= 31
the verifier has two states to explore:
one with w2 = 0 and another with w2 = 0xffffffff
which makes the verifier accept bpf_wiregard.c
A similar pattern exists were OR operation is used in place of the AND
operation, the verifier detects that pattern as well by forking the
state before the OR operation with a scalar in range [-1,0].
Note there are 20+ such patterns in bpf_wiregard.o compiled
with -O1 and -O2, but they're rarely seen in other production
bpf programs, so push_stack() approach is not a concern.
Reported-by: Hao Sun <sunhao.th@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Co-developed-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Puranjay Mohan <puranjay@kernel.org>
Link: https://lore.kernel.org/r/20260112201424.816836-2-puranjay@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_CFI enabled, the kernel strictly enforces that indirect
function calls use a function pointer type that matches the target
function. I ran into the following type mismatch when running BPF
self-tests:
CFI failure at bpf_obj_free_fields+0x190/0x238 (target:
bpf_crypto_ctx_release+0x0/0x94; expected type: 0xa488ebfc)
Internal error: Oops - CFI: 00000000f2008228 [#1] SMP
...
As bpf_crypto_ctx_release() is also used in BPF programs and using
a void pointer as the argument would make the verifier unhappy, add
a simple stub function with the correct type and register it as the
destructor kfunc instead.
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Tested-by: Viktor Malik <vmalik@redhat.com>
Link: https://lore.kernel.org/r/20260110082548.113748-7-samitolvanen@google.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull cgroup fix from Tejun Heo:
- Fix -Wflex-array-member-not-at-end warnings in cgroup_root
* tag 'cgroup-for-6.19-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Eliminate cgrp_ancestor_storage in cgroup_root
Pull scheduler fix from Ingo Molnar:
"Fix a crash in sched_mm_cid_after_execve()"
* tag 'sched-urgent-2026-01-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/mm_cid: Prevent NULL mm dereference in sched_mm_cid_after_execve()
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull power management fix from Rafael Wysocki:
"This fixes a crash in the hibernation image saving code that can be
triggered when the given compression algorithm is unavailable (Malaya
Kumar Rout)"
* tag 'pm-6.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: hibernate: Fix crash when freeing invalid crypto compressor
sched_mm_cid_after_execve() is called in bprm_execve()'s cleanup path even
when exec_binprm() fails. For the init task's first execve(), this causes a
problem:
1. current->mm is NULL (kernel threads don't have an mm)
2. sched_mm_cid_before_execve() exits early because mm is NULL
3. exec_binprm() fails (e.g., ENOENT for missing script interpreter)
4. sched_mm_cid_after_execve() is called with mm still NULL
5. sched_mm_cid_fork() is called unconditionally, triggering WARN_ON
This is easily reproduced by booting with an init that is a shell script
(#!/bin/sh) where the interpreter doesn't exist in the initramfs.
Fix this by checking if t->mm is NULL before calling sched_mm_cid_fork(),
matching the behavior of sched_mm_cid_before_execve() which already
handles this case via sched_mm_cid_exit()'s early return.
Fixes: b0c3d51b54 ("sched/mmcid: Provide precomputed maximal value")
Signed-off-by: Cong Wang <cwang@multikernel.io>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://patch.msgid.link/20251223215113.639686-1-xiyou.wangcong@gmail.com
The cgrp_ancestor_storage has two drawbacks:
- it's not guaranteed that the member immediately follows struct cgrp in
cgroup_root (root cgroup's ancestors[0] might thus point to a padding
and not in cgrp_ancestor_storage proper),
- this idiom raises warnings with -Wflex-array-member-not-at-end.
Instead of relying on the auxiliary member in cgroup_root, define the
0-th level ancestor inside struct cgroup (needed for static allocation
of cgrp_dfl_root), deeper cgroups would allocate flexible
_low_ancestors[]. Unionized alias through ancestors[] will
transparently join the two ranges.
The above change would still leave the flexible array at the end of
struct cgroup inside cgroup_root, so move cgrp also towards the end of
cgroup_root to resolve the -Wflex-array-member-not-at-end.
Link: https://lore.kernel.org/r/5fb74444-2fbb-476e-b1bf-3f3e279d0ced@embeddedor.com/
Reported-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Closes: https://lore.kernel.org/r/b3eb050d-9451-4b60-b06c-ace7dab57497@embeddedor.com/
Cc: David Laight <david.laight.linux@gmail.com>
Acked-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
When user resize all trace ring buffer through file 'buffer_size_kb',
then in ring_buffer_resize(), kernel allocates buffer pages for each
cpu in a loop.
If the kernel preemption model is PREEMPT_NONE and there are many cpus
and there are many buffer pages to be freed, it may not give up cpu
for a long time and finally cause a softlockup.
To avoid it, call cond_resched() after each cpu buffer free as Commit
f6bd2c9248 ("ring-buffer: Avoid softlockup in ring_buffer_resize()")
does.
Detailed call trace as follow:
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: 24-....: (14837 ticks this GP) idle=521c/1/0x4000000000000000 softirq=230597/230597 fqs=5329
rcu: (t=15004 jiffies g=26003221 q=211022 ncpus=96)
CPU: 24 UID: 0 PID: 11253 Comm: bash Kdump: loaded Tainted: G EL 6.18.2+ #278 NONE
pc : arch_local_irq_restore+0x8/0x20
arch_local_irq_restore+0x8/0x20 (P)
free_frozen_page_commit+0x28c/0x3b0
__free_frozen_pages+0x1c0/0x678
___free_pages+0xc0/0xe0
free_pages+0x3c/0x50
ring_buffer_resize.part.0+0x6a8/0x880
ring_buffer_resize+0x3c/0x58
__tracing_resize_ring_buffer.part.0+0x34/0xd8
tracing_resize_ring_buffer+0x8c/0xd0
tracing_entries_write+0x74/0xd8
vfs_write+0xcc/0x288
ksys_write+0x74/0x118
__arm64_sys_write+0x24/0x38
Cc: <mathieu.desnoyers@efficios.com>
Link: https://patch.msgid.link/20251228065008.2396573-1-mawupeng1@huawei.com
Signed-off-by: Wupeng Ma <mawupeng1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Introduce BPF_F_ALL_CPUS flag support for percpu_cgroup_storage maps to
allow updating values for all CPUs with a single value for update_elem
API.
Introduce BPF_F_CPU flag support for percpu_cgroup_storage maps to
allow:
* update value for specified CPU for update_elem API.
* lookup value for specified CPU for lookup_elem API.
The BPF_F_CPU flag is passed via map_flags along with embedded cpu info.
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Link: https://lore.kernel.org/r/20260107022022.12843-6-leon.hwang@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
