Implement the .ndo_open function to set default hardware settings
and initialize the descriptor ring and interrupts. Among them,
when requesting interrupt, because the first group of interrupts
needs to process more events, the overall structure and interrupt
handler will be different from other groups of interrupts, so it
needs to be handled separately. The first set of interrupt handlers
need to handle the interrupt status of RXQ0 and TXQ0, TXQ4~7,
while other groups of interrupt handlers will handle the interrupt
status of RXQ1&TXQ1 or RXQ2&TXQ2 or RXQ3&TXQ3 according to the
interrupt vector.
Signed-off-by: Justin Lai <justinlai0215@realtek.com>
Link: https://patch.msgid.link/20240904032114.247117-3-justinlai0215@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a driver for the motorcomm yt8821 2.5G ethernet phy. Verified the
driver on BPI-R3(with MediaTek MT7986(Filogic 830) SoC) development board,
which is developed by Guangdong Bipai Technology Co., Ltd..
yt8821 2.5G ethernet phy works in AUTO_BX2500_SGMII or FORCE_BX2500
interface, supports 2.5G/1000M/100M/10M speeds, and wol(magic package).
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Reviewed-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
yt8521 and yt8531s as Gigabit transceiver use bit15:14(bit9 reserved
default 0) as phy speed mask, yt8821 as 2.5G transceiver uses bit9 bit15:14
as phy speed mask.
Be compatible to yt8821, reform phy speed mask and phy speed macro.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Frank Sae <Frank.Sae@motor-comm.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-09-04-2
this is a pull request of 18 patches for net-next/master.
All 18 patches add support for CAN-FD IP core found on Rockchip
RK3568.
The first patch is co-developed by Elaine Zhang and me and adds DT
bindings documentation.
The remaining 17 patches are by me and add the driver in several
stages.
linux-can-next-for-6.12-20240904-2
* tag 'linux-can-next-for-6.12-20240904-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: add support for CAN_CTRLMODE_BERR_REPORTING
can: rockchip_canfd: add support for CAN_CTRLMODE_LOOPBACK
can: rockchip_canfd: add hardware timestamping support
can: rockchip_canfd: enable full TX-FIFO depth of 2
can: rockchip_canfd: prepare to use full TX-FIFO depth
can: rockchip_canfd: add stats support for errata workarounds
can: rockchip_canfd: rkcanfd_get_berr_counter_corrected(): work around broken {RX,TX}ERRORCNT register
can: rockchip_canfd: implement workaround for erratum 12
can: rockchip_canfd: implement workaround for erratum 6
can: rockchip_canfd: add TX PATH
can: rockchip_canfd: rkcanfd_register_done(): add warning for erratum 5
can: rockchip_canfd: rkcanfd_handle_rx_int_one(): implement workaround for erratum 5: check for empty FIFO
can: rockchip_canfd: add notes about known issues
can: rockchip_canfd: add support for rk3568v3
can: rockchip_canfd: add quirk for broken CAN-FD support
can: rockchip_canfd: add quirks for errata workarounds
can: rockchip_canfd: add driver for Rockchip CAN-FD controller
dt-bindings: can: rockchip_canfd: add rockchip CAN-FD controller
====================
Link: https://patch.msgid.link/20240904130256.1965582-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, users can see that bonding supports IPSec HW offload via ethtool.
However, this functionality does not work with NICs like Mellanox cards when
ESN (Extended Sequence Numbers) is enabled, as ESN functions are not yet
supported. This patch adds ESN support to the bonding IPSec device offload,
ensuring proper functionality with NICs that support ESN.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds a common function to check the status of IPSec devices.
This function will be useful for future implementations, such as IPSec ESN
and state offload callbacks.
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
ice: fix synchronization between .ndo_bpf() and reset
Larysa Zaremba says:
PF reset can be triggered asynchronously, by tx_timeout or by a user. With some
unfortunate timings both ice_vsi_rebuild() and .ndo_bpf will try to access and
modify XDP rings at the same time, causing system crash.
The first patch factors out rtnl-locked code from VSI rebuild code to avoid
deadlock. The following changes lock rebuild and .ndo_bpf() critical sections
with an internal mutex as well and provide complementary fixes.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: do not bring the VSI up, if it was down before the XDP setup
ice: remove ICE_CFG_BUSY locking from AF_XDP code
ice: check ICE_VSI_DOWN under rtnl_lock when preparing for reset
ice: check for XDP rings instead of bpf program when unconfiguring
ice: protect XDP configuration with a mutex
ice: move netif_queue_set_napi to rtnl-protected sections
====================
Link: https://patch.msgid.link/20240903183034.3530411-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless fixes for v6.11
Hopefully final fixes for v6.11 and this time only fixes to ath11k
driver. We need to revert hibernation support due to reported
regressions and we have a fix for kernel crash introduced in
v6.11-rc1.
* tag 'wireless-2024-09-04' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
MAINTAINERS: wifi: cw1200: add net-cw1200.h
Revert "wifi: ath11k: support hibernation"
Revert "wifi: ath11k: restore country code during resume"
wifi: ath11k: fix NULL pointer dereference in ath11k_mac_get_eirp_power()
====================
Link: https://patch.msgid.link/20240904135906.5986EC4CECA@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This NIC doesn't have hardware IRQ coalescing. Under high load,
interrupts can adversely affect performance. To mitigate this, enable
software IRQ coalescing by default. On my system this increases receive
throughput with iperf3 from 853 MBit/sec to 934 MBit/s, decreases
interrupts from 69489/sec to 2016/sec, and decreases CPU utilization
from 27% (4x Cortex-A53) to 14%. Latency is not affected (as far as I
can tell).
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240903184912.4151926-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
axienet_dma_err_handler can race with axienet_stop in the following
manner:
CPU 1 CPU 2
====================== ==================
axienet_stop()
napi_disable()
axienet_dma_stop()
axienet_dma_err_handler()
napi_disable()
axienet_dma_stop()
axienet_dma_start()
napi_enable()
cancel_work_sync()
free_irq()
Fix this by setting a flag in axienet_stop telling
axienet_dma_err_handler not to bother doing anything. I chose not to use
disable_work_sync to allow for easier backporting.
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Fixes: 8a3b7a252d ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver")
Link: https://patch.msgid.link/20240903175141.4132898-1-sean.anderson@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When reading registers from the PHY using the SIOCGMIIREG IOCTL any
errors returned from either mdiobus_read() or mdiobus_c45_read() are
ignored, and parts of the returned error is passed as the register value
back to user-space.
For example, if mdiobus_c45_read() is used with a bus that do not
implement the read_c45() callback -EOPNOTSUPP is returned. This is
however directly stored in mii_data->val_out and returned as the
registers content. As val_out is a u16 the error code is truncated and
returned as a plausible register value.
Fix this by first checking the return value for errors before returning
it as the register content.
Before this patch,
# phytool read eth0/0:1/0
0xffa1
After this change,
$ phytool read eth0/0:1/0
error: phy_read (-95)
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20240903171536.628930-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generic_ocp_write() asks the parameter "size" must be 4 bytes align.
Therefore, write the bp would fail, if the mac->bp_num is odd. Align the
size to 4 for fixing it. The way may write an extra bp, but the
rtl8152_is_fw_mac_ok() makes sure the value must be 0 for the bp whose
index is more than mac->bp_num. That is, there is no influence for the
firmware.
Besides, I check the return value of generic_ocp_write() to make sure
everything is correct.
Fixes: e5c266a611 ("r8152: set bp in bulk")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Link: https://patch.msgid.link/20240903063333.4502-1-hayeswang@realtek.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
So far the TX-FIFO is only used with a depth of 1, although the
hardware offers a depth of 2.
The workaround for the chips that are affected by erratum 6, i.e. EFF
frames may be send as standard frames, is to re-send the EFF frame.
This means the driver cannot queue the next frame for sending, as long
ad the EFF frame has not been successfully send out.
Introduce rkcanfd_get_effective_tx_free() that returns "0" space in
the TX-FIFO if an EFF frame is pending and the actual free space in
the TX-FIFO otherwise. Then replace rkcanfd_get_tx_free() with
rkcanfd_get_effective_tx_free() everywhere.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-16-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tests show that sometimes both CAN bus error counters read 0x0, even
if the controller is in warning mode
(RKCANFD_REG_STATE_ERROR_WARNING_STATE in RKCANFD_REG_STATE
set).
To work around this issue, if both error counters read from hardware
are 0x0, use the structure priv->bec, otherwise save the read value in
priv->bec.
In rkcanfd_handle_rx_int_one() decrement the priv->bec.rxerr for
successfully RX'ed CAN frames.
In rkcanfd_handle_tx_done_one() decrement the priv->bec.txerr for
successfully TX'ed CAN frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-14-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| A dominant bit at the third bit of the intermission may cause a
| transmission error.
|
| When sampling the third bit of the intermission as a dominant bit, if
| tx_req is configured to transmit extended frames at this time, the
| extended frame may be sent to the bus in the format of a standard
| frame. The extended frame will be sent as a standard frame and will not
| result in error frames
Turn on "Interframe Spaceing RX Mode" only during TX to work around
erratum 12, according to rock-chip:
| Spaceing RX Mode = 1, the third Bit between frames cannot receive
| and send, and the fourth Bit begins to receive and send.
|
| Spaceing RX Mode = 0, allowing the third Bit between frames to
| receive and send.
Message-ID: <be72939f-0a9e-0608-dfff-7b0096a26eba@rock-chips.com>
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-13-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| The CAN controller's transmission of extended frames may
| intermittently change into standard frames.
|
| When using the CAN controller to send extended frames, if the
| 'tx_req' is configured as 1 and coincides with the internal
| transmission point, the extended frame will be transmitted onto the
| bus in the format of a standard frame.
To work around Erratum 6, the driver is in self-receiving mode (RXSTX)
and all received CAN frames are passed through rkcanfd_rxstx_filter().
Add a check in rkcanfd_rxstx_filter() whether the received frame
corresponds to the current outgoing frame, but the extended CAN ID has
been mangled to a standard ID. In this case re-send the original CAN
frame.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-12-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The IP core has a TX event FIFO. In other IP cores, this type of FIFO
usually contains the events that a CAN frame has been successfully
sent. However, the IP core on the rk3568v2 the FIFO also holds events
of unsuccessful transmission attempts.
It turned out that the best way to work around this problem is to set
the IP core to self-receive mode (RXSTX), filter out the self-received
frames and insert them into the complete TX path.
Add a pair new functions to check if 2 struct canfd_frame are equal.
The 1st checks if the header of the CAN frames are equal, the 2nd
checks if the data portion are equal:
- rkcanfd_can_frame_header_equal()
- rkcanfd_can_frame_data_equal()
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-11-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The rk3568 CAN-FD errata sheet as of Tue 07 Nov 2023 11:25:31 +08:00
says:
| Erratum 5: Counters related to the TXFIFO and RXFIFO exhibit
| abnormal counting behavior.
|
| Due to a bug in the cross-asynchronous logic of the enable signals
| for rx_fifo_cnt and txe_fifo_frame_cnt counters, the counts of these
| two counters become inaccurate. This issue has resulted in the
| inability to use the TXFIFO and RXFIFO functions.
The errata sheet mentioned above states that only the rk3568v2 is
affected by this erratum, but tests with the rk3568v2 and rk3568v3
show that the RX_FIFO_CNT is sometimes too high. This leads to CAN
frames being read from the FIFO, which is then already empty.
Further tests on the rk3568v2 and rk3568v3 show that in this
situation (i.e. empty FIFO) all elements of the FIFO
header (frameinfo, id, ts) contain the same data.
On the rk3568v2 and rk3568v3, this problem only occurs extremely
rarely with the standard clock of 300 MHz, but almost immediately at
80 MHz.
To workaround this problem, check for empty FIFO with
rkcanfd_fifo_header_empty() in rkcanfd_handle_rx_int_one() and exit
early.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-9-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add driver for the Rockchip CAN-FD controller.
The IP core on the rk3568v2 SoC has 12 documented errata. Corrections
for these errata will be added in the upcoming patches.
Since several workarounds are required for the TX path, only add the
base driver that only implements the RX path.
Although the RX path implements CAN-FD support, it's not activated in
ctrlmode_supported, as the IP core in the rk3568v2 has problems with
receiving or sending certain CAN-FD frames.
Tested-by: Alibek Omarov <a1ba.omarov@gmail.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240904-rockchip-canfd-v5-4-8ae22bcb27cc@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add support for group stats for mac. The fbnic_set_counter help preserve
the default values for counters which are not touched by the driver.
The 'reset' flag in 'get_eth_mac_stats' allows to choose between
resetting the counter to recent most value or fetching the aggregated
values of the counter.
The 'fbnic_stat_rd64' read 64b stats counters in an atomic fashion using
read-read-read approach. This allows to isolate cases where counter is
moving too fast making accuracy of the counter questionable.
Command: ethtool -S eth0 --groups eth-mac
Example Output:
eth-mac-FramesTransmittedOK: 421644
eth-mac-FramesReceivedOK: 3849708
eth-mac-FrameCheckSequenceErrors: 0
eth-mac-AlignmentErrors: 0
eth-mac-OctetsTransmittedOK: 64799060
eth-mac-FramesLostDueToIntMACXmitError: 0
eth-mac-OctetsReceivedOK: 5134513531
eth-mac-FramesLostDueToIntMACRcvError: 0
eth-mac-MulticastFramesXmittedOK: 568
eth-mac-BroadcastFramesXmittedOK: 454
eth-mac-MulticastFramesReceivedOK: 276106
eth-mac-BroadcastFramesReceivedOK: 26119
eth-mac-FrameTooLongErrors: 0
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add ethtool ops support and enable 'get_drvinfo' for fbnic. The driver
provides firmware version information while the driver name and bus
information is provided by ethtool_get_drvinfo().
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the driver uses a linked list for storing the tx buffer
addresses. This requires a good amount of extra bookkeeping code. Ditch
the linked list in favor of tx buffers being in the same contiguous
memory space as the DCB's and the DB's. The FDMA library has a helper
for this - so use that.
The tx buffer addresses are now retrieved as an offset into the FDMA
memory space.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the fdma_dcb_add() function to add DCB's in the tx path. This gets
rid of the open-coding of nextptr and dataptr handling and leaves it to
the library.
Also, make sure the fdma indexes are advanced using: fdma_dcb_advance(),
so that the correct nextptr and dataptr offsets are retrieved.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the two functions: fdma_alloc_phys() and fdma_dcb_init() for tx
buffer allocation and use the new buffers throughout.
In order to replace the old buffers with the new ones, we have to do the
following refactoring:
- use fdma_alloc_phys() and fdma_dcb_init()
- replace the variables: tx->dma, tx->first_entry and tx->curr_entry
with the equivalents from the FDMA struct.
- replace uses of sparx5_db_hw and sparx5_tx_dcb_hw with fdma_db and
fdma_dcb.
- add sparx5_fdma_tx_dataptr_cb callback for obtaining the dataptr.
- Initialize FDMA struct values.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Reviewed-by: Steen Hegelund <Steen.Hegelund@microchip.com>
Reviewed-by: Jens Emil Schulz Østergaard <jensemil.schulzostergaard@microchip.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
