Requested by Maxime Ripard for drm-misc-next because renesas people need
fb797a7010 ("drm: renesas: rz-du: mipi_dsi: Set DSI divider").
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
Passing a structure by value into a function is sometimes problematic,
for a number of reasons. Of of these is a warning from the 32-bit arm
compiler:
drivers/gpu/drm/drm_gpusvm.c: In function '__drm_gpusvm_unmap_pages':
drivers/gpu/drm/drm_gpusvm.c:1152:33: note: parameter passing for argument of type 'struct drm_pagemap_addr' changed in GCC 9.1
1152 | dpagemap->ops->device_unmap(dpagemap,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1153 | dev, *addr);
| ~~~~~~~~~~~
This particular problem is harmless since we are not mixing compiler versions
inside of the compiler. However, passing this by reference avoids the warning
along with providing slightly better calling conventions as it avoids an
extra copy on the stack.
Fixes: 75af93b3f5 ("drm/pagemap, drm/xe: Support destination migration over interconnect")
Fixes: 2df55d9e66 ("drm/xe: Support pcie p2p dma as a fast interconnect")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260216134644.1025365-1-arnd@kernel.org
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
(cherry picked from commit 95162db020)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Passing a structure by value into a function is sometimes problematic,
for a number of reasons. Of of these is a warning from the 32-bit arm
compiler:
drivers/gpu/drm/drm_gpusvm.c: In function '__drm_gpusvm_unmap_pages':
drivers/gpu/drm/drm_gpusvm.c:1152:33: note: parameter passing for argument of type 'struct drm_pagemap_addr' changed in GCC 9.1
1152 | dpagemap->ops->device_unmap(dpagemap,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1153 | dev, *addr);
| ~~~~~~~~~~~
This particular problem is harmless since we are not mixing compiler versions
inside of the compiler. However, passing this by reference avoids the warning
along with providing slightly better calling conventions as it avoids an
extra copy on the stack.
Fixes: 75af93b3f5 ("drm/pagemap, drm/xe: Support destination migration over interconnect")
Fixes: 2df55d9e66 ("drm/xe: Support pcie p2p dma as a fast interconnect")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260216134644.1025365-1-arnd@kernel.org
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Now that we have an atomic_create_state callback for drm_private_objs,
we can provide a helper for it.
It's somewhat different from the other similar helpers though, because
we definitely expect drm_private_obj to be subclassed. It wouldn't make
sense for a driver to use it as-is.
So we can't provide a straight implementation of the atomic_create_state
callback, but rather we provide the parts that will deal with the
drm_private_obj initialization, and we will leave the allocation and
initialization of the subclass to drivers.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-3-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_private_obj initialization was inconsistent with the rest of the
KMS objects. Indeed, it required to pass a preallocated state in
drm_private_obj_init(), while all the others objects would have a reset
callback that would be called later on to create the state.
However, reset really is meant to reset the hardware and software state.
That it creates an initial state is a side-effect that has been used in
all objects but drm_private_obj. This is made more complex since some
drm_private_obj, the DisplayPort ones in particular, need to be
persistent across and suspend/resume cycle, and such a cycle would call
drm_mode_config_reset().
Thus, we need to add a new callback to allocate a pristine state for a
given private object.
This discussion has also came up during the atomic state readout
discussion, so it might be introduced into the other objects later on.
Until all drivers are converted to that new allocation pattern, we will
only call it if the passed state is NULL. This will be removed
eventually.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260128-drm-private-obj-reset-v4-2-90891fa3d3b0@redhat.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Move the DRM buddy allocator one level up so that it can be used by GPU
drivers (example, nova-core) that have usecases other than DRM (such as
VFIO vGPU support). Modify the API, structures and Kconfigs to use
"gpu_buddy" terminology. Adapt the drivers and tests to use the new API.
The commit cannot be split due to bisectability, however no functional
change is intended. Verified by running K-UNIT tests and build tested
various configurations.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
[airlied: I've split this into two so git can find copies easier.
I've also just nuked drm_random library, that stuff needs to be done
elsewhere and only the buddy tests seem to be using it].
Signed-off-by: Dave Airlie <airlied@redhat.com>
Move the DRM buddy allocator one level up so that it can be used by GPU
drivers (example, nova-core) that have usecases other than DRM (such as
VFIO vGPU support). Modify the API, structures and Kconfigs to use
"gpu_buddy" terminology. Adapt the drivers and tests to use the new API.
The commit cannot be split due to bisectability, however no functional
change is intended. Verified by running K-UNIT tests and build tested
various configurations.
Signed-off-by: Joel Fernandes <joelagnelf@nvidia.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
[airlied: I've split this into two so git can find copies easier.
I've also just nuked drm_random library, that stuff needs to be done
elsewhere and only the buddy tests seem to be using it].
Signed-off-by: Dave Airlie <airlied@redhat.com>
of_drm_find_bridge() is deprecated. Move to its replacement
of_drm_find_and_get_bridge() which gets a bridge reference, and ensure it
is put when done. Also switch to the drm_bridge::next_bridge pointer.
This needs to handle both cases: when of_drm_find_panel() succeeds and when
it fails.
In the 'else' case (i.e. when of_drm_find_panel() fails), just switch to
of_drm_find_and_get_bridge() to ensure the bridge is not freed while in use
in the function tail, when it is stored in dsi->bridge.next_bridge.
In the 'then' case (i.e. when of_drm_find_panel() succeeds),
devm_drm_panel_bridge_add() already increments the refcount using devres
which ties the bridge allocation lifetime to the device lifetime, so we
would not need to do anything. However to have the same behaviour in both
branches take an additional reference here, so that the bridge needs to be
put whichever branch is taken without more complicated logic. Ensure to
clear the bridge pointer however, to avoid calling drm_bridge_put() on an
ERR_PTR.
Acked-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://patch.msgid.link/20260109-drm-bridge-alloc-getput-drm_of_find_bridge-2-v2-12-8bad3ef90b9f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Havign a single set of InfoFrame callbacks doesn't provide enough
information to the DRM framework about the InfoFrame types that are
actually supported. Also it's not really future-proof: it provides a way
to program only a single Vendor-Specific frame, however we might need to
support multiple VSIs at the same time (e.g. HDMI vs HDMI Forum
VSIs).
Provide separate sets of callbacks, one per the InfoFrame type.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-6-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Having only a single set of callbacks, hdmi_clear_infoframe and
hdmi_write_infoframe, bridge drivers don't have an easy way to signal to
the DRM framework, which InfoFrames are actually supported by the
hardware and by the driver and which are not. Also, it makes it
extremely easy for HDMI bridge drivers to skip implementing the
seemingly required InfoFrames (e.g. HDMI VSI). Last, but not least,
those callbacks take a single 'type' parameter, which makes it
impossible to implement support for multiple VSIs (which will be
required once we start working on HDMI Forum VSI).
Split the callbacks into a per-InfoFrame-kind pairs, letting the bridge
drivers actually signal supported features. The implementation follows
the overall drm_bridge design, where the bridge has a single
drm_bridge_funcs implementation and signals, which functions are to be
called using the drm_bridge->ops flags.
The AVI and HDMI VSI are assumed to be required for a normal HDMI
operation (with the drivers getting a drm_warn_once() stub
implementation if one is missing). The Audio InfoFrame is handled by the
existing DRM_BRIDGE_OP_HDMI_AUDIO, while the SPD and HDR DRM InfoFrames
got new drm_bridge_ops values.
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20260107-limit-infoframes-2-v4-5-213d0d3bd490@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
drm-misc-fixes for v6.19-rc6:
vmwgfx:
- Fix hw regression from refactoring cursor handling on v10 'hardware'
- Fix warnings in destructor by merging the 2 release functions
- kernel doc fix
- error handling in vmw_compat_shader_add()
rockchip:
- fix vop2 polling
- fix regression waiting for cfgdone without config change
- fix warning when enabling encoder
core:
- take gem lock when preallocating in gpuvm.
- add single byte read fallback to dp for broken usb-c adapters
- remove duplicate drm_sysfb declarations
gud:
- Fix oops on usb disconnect
Simple panel:
- Re-add fallback when connector is not set to fix regressions
- Set correct type in DataImage SCF0700C48GGU18
nouveau:
- locking fixes for cursor handling.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/ce0acfe2-9c1a-42b7-8782-f1e7f34b8544@linux.intel.com
Beyond Display:
- Make 'guc_hw_reg_state' static as it isn't exported (Ben)
- Fix doc build on mei related interface header (Jani)
Display related:
- Fix ggtt fb alignment on Xe display (Tvrtko)
- More display clean-up towards deduplication and full separation (Jani)
- Use the consolidated HDMI tables (Suraj)
- Account for DSC slice overhead (Ankit)
- Prepare GVT for display modularization (Ankit, Jani)
- Enable/Disable DC balance along with VRR DSB (Mitul, Ville)
- Protection against unsupported modes in LT PHY (Suraj)
- Display W/a addition and fixes (Gustavo)
- Fix many SPDX identifier comments (Ankit)
- Incorporate Xe3_LPD changes for CD2X divider (Gustavo)
- Clean up link BW/DSC slice config computation (Imre)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aWkNThVRSkGAfUVv@intel.com
The function drm_property_replace_blob_from_id() allows checking whether
the blob size is equal to a predefined value. In case of variable-size
properties (like the gamma / degamma LUTs) we might want to check for
the blob size against the maximum, allowing properties of the size
lesser than the max supported by the hardware. Extend the function in
order to support such checks.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106-drm-fix-lut-checks-v3-2-f7f979eb73c8@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
We have a helper to get property values for non-atomic drivers and
another one default property values for atomic drivers. In some cases we
need the ability to get value of immutable property, no matter what kind
of driver it is. Implement new property-related helper,
drm_object_immutable_property_get_value(), which lets the caller to get
the value of the immutable property.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260106-drm-fix-lut-checks-v3-1-f7f979eb73c8@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Some USB-C hubs and adapters have buggy firmware where multi-byte AUX
reads consistently timeout, while single-byte reads from the same address
work correctly.
Known affected devices that exhibit this issue:
- Lenovo USB-C to VGA adapter (VIA VL817 chipset)
idVendor=17ef, idProduct=7217
- Dell DA310 USB-C mobile adapter hub
idVendor=413c, idProduct=c010
Analysis of the failure pattern shows:
- Single-byte probes to 0xf0000 (LTTPR) succeed
- Single-byte probes to 0x00102 (TRAINING_AUX_RD_INTERVAL) succeed
- Multi-byte reads from 0x00000 (DPCD capabilities) timeout with -ETIMEDOUT
- Retrying does not help - the failure is consistent across all attempts
The issue appears to be a firmware bug in the AUX transaction handling
that specifically affects multi-byte reads.
Add a fallback mechanism in drm_dp_dpcd_read_data() that attempts
byte-by-byte reading when the normal multi-byte read fails. This
workaround only activates for adapters that fail the standard read path,
ensuring no impact on correctly functioning hardware.
Tested with:
- Lenovo USB-C to VGA adapter (VIA VL817) - now works with fallback
- Dell DA310 USB-C hub - now works with fallback
- Dell/Analogix Slimport adapter - continues to work with normal path
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251204024647.1462866-1-acelan.kao@canonical.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
drm-misc-next for 6.20:
UAPI Changes:
Cross-subsystem Changes:
Core Changes:
- draw: Add API to check if a format conversion can be done
- panic: Rename draw_panic_static_* to draw_panic_screen_*, Add kunit
tests
- shmem: Improve tests
Driver Changes:
- ast: Big endian fixes
- etnaviv: Add PPU flop reset support
- panfrost: Add GPU_PM_RT support for RZ/G3E SoC
- panthor: multiple fixes around VM termination, huge page support
- pl111: Fix build regression
- v3d: Fix DMA segment size
- bridge:
- Add connector argument to .hpd_notify
- Plenty of patches to convert existing drivers to refcounting
- Convert Rockchip's inno hdmi support to a proper bridge
- lontium-lt9611uxc: Switch to HDMI audio helpers
- panel:
- New panel: BOE NV140WUM-T08
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260108-literate-nyala-of-courtesy-de501a@houat
In commit 9ce4aef9a5 ("drm/gpuvm: take GEM lock inside
drm_gpuvm_bo_obtain_prealloc()") we update
drm_gpuvm_bo_obtain_prealloc() to take locks internally, which means
that it's only usable in immediate mode.
In this commit, we notice that drm_gpuvm_bo_obtain() requires you to use
staged mode. This means that we now have one variant of obtain for each
mode you might use gpuvm in.
To reflect this information, we add a warning about using it in
immediate mode, and to make the distinction clearer we rename the method
with a _locked() suffix so that it's clear that it requires the caller
to take the locks.
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://patch.msgid.link/20260108-gpuvm-rust-v2-2-dbd014005a0b@google.com
[ Slightly reword commit message to refer to commit 9ce4aef9a5
("drm/gpuvm: take GEM lock inside drm_gpuvm_bo_obtain_prealloc()").
- Danilo ]
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Fix kernel-doc warnings on struct intel_lb_component_ops:
Warning: include/drm/intel/intel_lb_mei_interface.h:55 Incorrect use of
kernel-doc format: * push_payload - Sends a payload to the
authentication firmware
And a bunch more. There isn't really support for documenting function
pointer struct members in kernel-doc, but at least reference the member
properly.
Fixes: 741eeabb7c ("mei: late_bind: add late binding component driver")
Cc: Alexander Usyskin <alexander.usyskin@intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Link: https://patch.msgid.link/20260107160226.2381388-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
drm-misc-fixes for v6.19-rc5:
pl111:
- Fix error handling in probe
mediatek/atomic/tidss:
- Fix tidss in another way and revert reordering of pre-enable and post-disable operations,
as it breaks other bridge drivers.
nouveau:
- Fix regression from fwsec s/r fix.
pci/vga:
- Fix multiple gpu's being reported a 'boot_display'
fb-helper:
- Fix vblank timeout during suspend/reset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f50067e6-243a-4ed8-9781-1e4e4fdebc8e@linux.intel.com
After resume from suspend to RAM, the following splash is generated if
the HDMI driver is probed (independent of a connected cable):
[ 1194.484052] irq 80: nobody cared (try booting with the "irqpoll" option)
[ 1194.484074] CPU: 0 UID: 0 PID: 627 Comm: rtcwake Not tainted 6.17.0-rc7-g96f1a11414b3 #1 PREEMPT
[ 1194.484082] Hardware name: Rockchip RK3576 EVB V10 Board (DT)
[ 1194.484085] Call trace:
[ 1194.484087] ... (stripped)
[ 1194.484283] handlers:
[ 1194.484285] [<00000000bc363dcb>] dw_hdmi_qp_main_hardirq [dw_hdmi_qp]
[ 1194.484302] Disabling IRQ #80
Apparently the HDMI IP is losing part of its state while the system
is suspended and generates spurious interrupts during resume. The
bug has not yet been noticed, as system suspend does not yet work
properly on upstream kernel with either the Rockchip RK3588 or RK3576
platform.
Fixes: 128a9bf8ac ("drm/rockchip: Add basic RK3588 HDMI output support")
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251014-rockchip-hdmi-suspend-fix-v1-1-983fcbf44839@collabora.com
Many bridge drivers store a next_bridge pointer in their private data and
use it for attach and sometimes other purposes. This is going to be risky
when bridge hot-unplug is used.
Considering this example scenario:
1. pipeline: encoder --> bridge A --> bridge B --> bridge C
2. encoder takes a reference to bridge B
3. bridge B takes a next_bridge reference to bridge C
4. encoder calls (bridge B)->b_foo(), which in turns references
next_bridge, e.g.:
b_foo() {
bar(b->next_bridge);
}
If bridges B and C are removed, bridge C can be freed but B is still
allocated because the encoder holds a reference to B. So when step 4
happens, 'b->next-bridge' would be a use-after-free.
Calling drm_bridge_put() in the B bridge .remove function does not solve
the problem as it leaves a (potentially long) risk window between B removal
and the final deallocation of B. A safe moment to put the B reference is in
__drm_bridge_free(), when the last reference has been put. This can be done
by drivers in the .destroy func. However to avoid the need for so many
drivers to implement a .destroy func, just offer a next_bridge pointer to
all bridges that is automatically put it in __drm_bridge_free(), exactly
when the .destroy func is called.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Link: https://lore.kernel.org/all/20251201-thick-jasmine-oarfish-1eceb0@houat/
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20251216-drm-bridge-alloc-getput-drm_of_find_bridge-v3-6-b5165fab8058@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Beyond Display related:
- Switch to use kernel standard fault injection in i915 (Juha-Pekka)
Display uAPI related:
- Display uapi vs. hw state fixes (Ville)
- Expose sharpness only if num_scalers is >= 2 (Nemesa)
Display related:
- More display driver refactor and clean-ups, specially towards separation (Jani)
- Add initial support Xe3p_LPD for NVL (Gustavo, Sai, )
- BMG FBC W/a (Vinod)
- RPM fix (Dibin)
- Add MTL+ platforms to support dpll framework (Mika, Imre)
- Other PLL related fixes (Imre)
- Fix DIMM_S DRAM decoding on ICL (Ville)
- Async flip refactor (Ville, Jouni)
- Go back to using AUX interrupts (Ville)
- Reduce severity of failed DII FEC enabling (Grzelak)
- Enable system cache support for FBC (Vinod)
- Move PSR/Panel Replay sink data into intel_connector and other PSR changes (Jouni)
- Detect AuxCCS support via display parent interface (Tvrtko)
- Clean up link BW/DSC slice config computation(Imre)
- Toggle powerdown states for C10 on HDMI (Gustavo)
- Add parent interface for PC8 forcewake tricks (Ville)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/aUW3bVDdE63aSFOJ@intel.com
