We can't read/write to DCN registers while in IPS. Since, that can cause
the system to hang. So, before proceeding with the access in that
scenario, force the system out of IPS.
Cc: stable@vger.kernel.org # 6.6+
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We need to take the reset domain lock before flush hdp. We can't put the
lock inside amdgpu_device_flush_hdp itself because it is used during
reset where we already take the write side lock.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Which method is used to flush tlb does not depend on whether a reset is
in progress or not. We should skip flush altogether if the GPU will get
reset. So put both path under reset_domain read lock.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Here since we are in reset and takes the reset_domain write side lock
already. We can't use the flush tlb helper which tries to take the read
side.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When amdgpu_gart_invalidate_tlb helper is introduced this part was left
out of the conversion. Avoid the code duplication here.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
is_hws_hang and is_resetting serves pretty much the same purpose and
they all duplicates the work of the reset_domain lock, just check that
directly instead. This also eliminate a few bugs listed below and get
rid of dqm->ops.pre_reset.
kfd_hws_hang did not need to avoid scheduling another reset. If the
on-going reset decided to skip GPU reset we have a bad time, otherwise
the extra reset will get cancelled anyway.
remove_queue_mes forgot to check is_resetting flag compared to the
pre-MES path unmap_queue_cpsch, so it did not block hw access during
reset correctly.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We send back the ready to reset message before we stop anything. This is
wrong. Move it to when we are actually ready for the FLR to happen.
In the current state since we take tens of seconds to stop everything,
it is very likely that host would give up waiting and reset the GPU
before we send ready, so it would be the same as before. But this gets
rid of the hack with reset_domain locking and also let us tell how slow
ready to reset actually is from the host. The ready to reset speed can
be improved later.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings the following changes:
- Add sequential ONO sequencing for DCN35
- Add new GPINT command definitions
- reduce ODM slice count to initial new dc state only when needed
- Enable copying of bounding box data from VBIOS DMUB
- Guard reading 3DLUT registers for dcn32/dcn35
Reviewed-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
There are other factors that determine the number
of DSC slices. The slices should not be determined
in DML but retrieve the value calculated from driver.
[how]
Update the logic to determine DSC slice.
Make DSCDelay per display pipe.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Sung Joon Kim <sungjoon.kim@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Description]
In newer DCN's the programming of SYMCLK_FE_SRC_SEL depends on
the value of DIG_FE_SOURCE_SELECT. If DIG_FE_SOURCE_SELECT is not
already programmed at the time of PHY / DIG enable then the FW
sequence will program an incorrect SYMCLK source. Ensure that we
program DIG_FE_SOURCE_SELECT for all DIO scenarios (DVI in this
particular case) before going through the PHY / DIG enable sequence.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Since the range of align is 0~7, the expression is: align = (attr >> 3) & 7.
In the case of ATOM_ARG_IMM, the code cannot reach the default case.
So there is no need for "break".
Signed-off-by: Jesse Zhang <Jesse.Zhang@amd.com>
Suggested-by: Tim Huang <Tim.Huang@amd.com>
Reviewed-by: Tim Huang <Tim.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds a null check for the 'afb' variable in the
amdgpu_dm_plane_handle_cursor_update function. Previously, 'afb' was
assumed to be null, but was used later in the code without a null check.
This could potentially lead to a null pointer dereference.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_plane.c:1298 amdgpu_dm_plane_handle_cursor_update() error: we previously assumed 'afb' could be null (see line 1252)
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Hersen Wu <hersenxs.wu@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For some panel, it cannot handle pseudo vblank set by otg resync
when leave psr
[How]
The monitor patch will keep otg_on during enter IPS1.
And then we don't need to do otg resync when wake up.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Lewis Huang <lewis.huang@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY&HOW]
UCLK and FCLK are updated together, so an FCLK update can also cause UCLK update
to SMU. When this happens, the UCLK provided should be max if switching is
unsupported.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
enc10->base.features.flags.bits.DP_IS_USB_C will be overwritten if we set it
before initializing enc10->base.features
[How]
Determine DP_IS_USB_C after enc10->base.features is initialized. Besides,
bp_cap_info.DP_IS_USB_C will never be set in get_connector_speed_cap_info().
Remove the redudant code.
Reviewed-by: Roman Li <roman.li@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
OPPs couldn't disconnect from the ODM that cause the double buffer pending not being latched due to missing VUPDATE.
[HOW]
Moving memory blanking before OTG turn off to make sure double buffer latched correctly.
Reviewed-by: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Yihan Zhu <yihan.zhu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The if conditions !A || A && B can be simplified to !A || B.
Fixes the following Coccinelle/coccicheck warnings reported by
excluded_middle.cocci:
WARNING !A || A && B is equivalent to !A || B
WARNING !A || A && B is equivalent to !A || B
WARNING !A || A && B is equivalent to !A || B
Compile-tested only.
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
HPD sense changes can occur during low power states and need to be
notified from firmware to driver. Upon notification the hotplug
redetection routines should execute.
[How]
Add Support in DMUB srv and DMUB srv stat for receiving these
notifications. DM can hook them up and process the HPD redetection
once received.
Reviewed-by: Duncan Ma <duncan.ma@amd.com>
Acked-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
