Johannes Berg says:
====================
First 6.15 material:
* cfg80211/mac80211
- remove cooked monitor support
- strict mode for better AP testing
- basic EPCS support
- OMI RX bandwidth reduction support
* rtw88
- preparation for RTL8814AU support
* rtw89
- use wiphy_lock/wiphy_work
- preparations for MLO
- BT-Coex improvements
- regulatory support in firmware files
* iwlwifi
- preparations for the new iwlmld sub-driver
* tag 'wireless-next-2025-03-04-v2' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (128 commits)
wifi: iwlwifi: remove mld/roc.c
wifi: mac80211: refactor populating mesh related fields in sinfo
wifi: cfg80211: reorg sinfo structure elements for mesh
wifi: iwlwifi: Fix spelling mistake "Increate" -> "Increase"
wifi: iwlwifi: add Debug Host Command APIs
wifi: iwlwifi: add IWL_MAX_NUM_IGTKS macro
wifi: iwlwifi: add OMI bandwidth reduction APIs
wifi: iwlwifi: remove mvm prefix from iwl_mvm_d3_end_notif
wifi: iwlwifi: remember if the UATS table was read successfully
wifi: iwlwifi: export iwl_get_lari_config_bitmap
wifi: iwlwifi: add support for external 32 KHz clock
wifi: iwlwifi: mld: add a debug level for EHT prints
wifi: iwlwifi: mld: add a debug level for PTP prints
wifi: iwlwifi: remove mvm prefix from iwl_mvm_esr_mode_notif
wifi: iwlwifi: use 0xff instead of 0xffffffff for invalid
wifi: iwlwifi: location api cleanup
wifi: cfg80211: expose update timestamp to drivers
wifi: mac80211: add ieee80211_iter_chan_contexts_mtx
wifi: mac80211: fix integer overflow in hwmp_route_info_get()
wifi: mac80211: Fix possible integer promotion issue
...
====================
Link: https://patch.msgid.link/20250304125605.127914-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add documentation for the netconsole task name feature in
Documentation/networking/netconsole.rst. This explains how to enable
task name via configfs and demonstrates the output format.
The documentation includes:
- How to enable/disable the feature via taskname_enabled
- The format of the task name in the output
- An example showing the task name appearing in messages
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce the airoha,npu property for the NPU node available on
EN7581 SoC. The airoha Network Processor Unit (NPU) is used to
offload network traffic forwarded between Packet Switch Engine
(PSE) ports.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds the NPU document binding for EN7581 SoC.
The Airoha Network Processor Unit (NPU) provides a configuration interface
to implement wired and wireless hardware flow offloading programming Packet
Processor Engine (PPE) flow table.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since commit 05c1280a2b ("netdev_features: convert NETIF_F_NETNS_LOCAL to
dev->netns_local"), there is no way to see if the netns_immutable property
s set on a device. Let's add a netlink attribute to advertise it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
A common task for most drivers is to remember the user-set CPU affinity
to its IRQs. On each netdev reset, the driver should re-assign the user's
settings to the IRQs. Unify this task across all drivers by moving the CPU
affinity to napi->config.
However, to move the CPU affinity to core, we also need to move aRFS
rmap management since aRFS uses its own IRQ notifiers.
For the aRFS, add a new netdev flag "rx_cpu_rmap_auto". Drivers supporting
aRFS should set the flag via netif_enable_cpu_rmap() and core will allocate
and manage the aRFS rmaps. Freeing the rmap is also done by core when the
netdev is freed. For better IRQ affinity management, move the IRQ rmap
notifier inside the napi_struct and add new notify.notify and
notify.release functions: netif_irq_cpu_rmap_notify() and
netif_napi_affinity_release().
Now we have the aRFS rmap management in core, add CPU affinity mask to
napi_config. To delegate the CPU affinity management to the core, drivers
must:
1 - set the new netdev flag "irq_affinity_auto":
netif_enable_irq_affinity(netdev)
2 - create the napi with persistent config:
netif_napi_add_config()
3 - bind an IRQ to the napi instance: netif_napi_set_irq()
the core will then make sure to use re-assign affinity to the napi's
IRQ.
The default IRQ mask is set to one cpu starting from the closest NUMA.
Signed-off-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20250224232228.990783-2-ahmed.zaki@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Yong-Hao Zou mentioned that linux was not strict as other OS in 3WHS,
for flows using TCP TS option (RFC 7323)
As hinted by an old comment in tcp_check_req(),
we can check the TSEcr value in the incoming packet corresponds
to one of the SYNACK TSval values we have sent.
In this patch, I record the oldest and most recent values
that SYNACK packets have used.
Send a challenge ACK if we receive a TSEcr outside
of this range, and increase a new SNMP counter.
nstat -az | grep TSEcrRejected
TcpExtTSEcrRejected 0 0.0
Due to TCP fastopen implementation, do not apply yet these checks
for fastopen flows.
v2: No longer use req->num_timeout, but treq->snt_tsval_first
to detect when first SYNACK is prepared. This means
we make sure to not send an initial zero TSval.
Make sure MPTCP and TCP selftests are passing.
Change MIB name to TcpExtTSEcrRejected
v1: https://lore.kernel.org/netdev/CADVnQykD8i4ArpSZaPKaoNxLJ2if2ts9m4As+=Jvdkrgx1qMHw@mail.gmail.com/T/
Reported-by: Yong-Hao Zou <yonghaoz1994@gmail.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Neal Cardwell <ncardwell@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250225171048.3105061-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull landlock fixes from Mickaël Salaün:
"Fixes to TCP socket identification, documentation, and tests"
* tag 'landlock-6.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Add binaries to .gitignore
selftests/landlock: Test that MPTCP actions are not restricted
selftests/landlock: Test TCP accesses with protocol=IPPROTO_TCP
landlock: Fix non-TCP sockets restriction
landlock: Minor typo and grammar fixes in IPC scoping documentation
landlock: Fix grammar error
selftests/landlock: Enable the new CONFIG_AF_UNIX_OOB
Pull powerpc fix from Madhavan Srinivasan:
- Fix for cross-reference in documentation and deprecation warning
Thanks to Andrew Donnellan and Bagas Sanjaya.
* tag 'powerpc-6.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
cxl: Fix cross-reference in documentation and add deprecation warning
Pull x86 fixes from Ingo Molnar:
- Fix AVX-VNNI CPU feature dependency bug triggered via the 'noxsave'
boot option
- Fix typos in the SVA documentation
- Add Tony Luck as RDT co-maintainer and remove Fenghua Yu
* tag 'x86-urgent-2025-02-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
docs: arch/x86/sva: Fix two grammar errors under Background and FAQ
x86/cpufeatures: Make AVX-VNNI depend on AVX
MAINTAINERS: Change maintainer for RDT
Martin KaFai Lau says:
====================
pull-request: bpf-next 2025-02-20
We've added 19 non-merge commits during the last 8 day(s) which contain
a total of 35 files changed, 1126 insertions(+), 53 deletions(-).
The main changes are:
1) Add TCP_RTO_MAX_MS support to bpf_set/getsockopt, from Jason Xing
2) Add network TX timestamping support to BPF sock_ops, from Jason Xing
3) Add TX metadata Launch Time support, from Song Yoong Siang
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
igc: Add launch time support to XDP ZC
igc: Refactor empty frame insertion for launch time support
net: stmmac: Add launch time support to XDP ZC
selftests/bpf: Add launch time request to xdp_hw_metadata
xsk: Add launch time hardware offload support to XDP Tx metadata
selftests/bpf: Add simple bpf tests in the tx path for timestamping feature
bpf: Support selective sampling for bpf timestamping
bpf: Add BPF_SOCK_OPS_TSTAMP_SENDMSG_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_ACK_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_HW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SND_SW_CB callback
bpf: Add BPF_SOCK_OPS_TSTAMP_SCHED_CB callback
net-timestamp: Prepare for isolating two modes of SO_TIMESTAMPING
bpf: Disable unsafe helpers in TX timestamping callbacks
bpf: Prevent unsafe access to the sock fields in the BPF timestamping callback
bpf: Prepare the sock_ops ctx and call bpf prog for TX timestamping
bpf: Add networking timestamping support to bpf_get/setsockopt()
selftests/bpf: Add rto max for bpf_setsockopt test
bpf: Support TCP_RTO_MAX_MS for bpf_setsockopt
====================
Link: https://patch.msgid.link/20250221022104.386462-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add dtschema for the MDIO controller found in the RTL9300 Ethernet
switch. The controller is slightly unusual in that direct MDIO
communication is not possible. We model the MDIO controller with the
MDIO buses as child nodes and the PHYs as children of the buses. The
mapping of switch port number to MDIO bus/addr requires the
ethernet-ports sibling to provide the mapping via the phy-handle
property.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250218195216.1034220-4-chris.packham@alliedtelesis.co.nz
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull SoC fixes from Arnd Bergmann:
"Two people stepped up as platform co-maintainers: Andrew Jeffery for
ASpeed and Janne Grunau for Apple.
The rockchip platform gets 9 small fixes for devicetree files,
addressing both compile-time warnings and board specific bugs.
One bugfix for the optee firmware driver addresses a reboot-time hang.
Two drivers need improved Kconfig dependencies to allow wider compile-
testing while hiding the drivers on platforms that can't use them.
ARM SCMI and loongson-guts drivers get minor bugfixes"
* tag 'soc-fixes-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: loongson: loongson2_guts: Add check for devm_kstrdup()
tee: optee: Fix supplicant wait loop
platform: cznic: CZNIC_PLATFORMS should depend on ARCH_MVEBU
firmware: imx: IMX_SCMI_MISC_DRV should depend on ARCH_MXC
MAINTAINERS: arm: apple: Add Janne as maintainer
MAINTAINERS: Mark Andrew as M: for ASPEED MACHINE SUPPORT
firmware: arm_scmi: imx: Correct tx size of scmi_imx_misc_ctrl_set
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: defconfig: Enable TISCI Interrupt Router and Aggregator
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Pull mtd fixes from Miquel Raynal:
"The two most important fixes in this list are probably the SST write
failure and the Qcom raw NAND controller probe failure which are due
to some refactoring, otherwise there has been a series of misc fixes
on the Cadence raw NAND controller driver and especially on the DMA
side"
* tag 'mtd/fixes-for-6.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: cadence: fix unchecked dereference
mtd: spi-nor: sst: Fix SST write failure
dt-bindings: mtd: cadence: document required clock-names
mtd: rawnand: qcom: fix broken config in qcom_param_page_type_exec
mtd: rawnand: cadence: fix incorrect device in dma_unmap_single
mtd: rawnand: cadence: use dma_map_resource for sdma address
mtd: rawnand: cadence: fix error code in cadence_nand_init()
Pull BPF fixes from Daniel Borkmann:
- Fix a soft-lockup in BPF arena_map_free on 64k page size kernels
(Alan Maguire)
- Fix a missing allocation failure check in BPF verifier's
acquire_lock_state (Kumar Kartikeya Dwivedi)
- Fix a NULL-pointer dereference in trace_kfree_skb by adding kfree_skb
to the raw_tp_null_args set (Kuniyuki Iwashima)
- Fix a deadlock when freeing BPF cgroup storage (Abel Wu)
- Fix a syzbot-reported deadlock when holding BPF map's freeze_mutex
(Andrii Nakryiko)
- Fix a use-after-free issue in bpf_test_init when eth_skb_pkt_type is
accessing skb data not containing an Ethernet header (Shigeru
Yoshida)
- Fix skipping non-existing keys in generic_map_lookup_batch (Yan Zhai)
- Several BPF sockmap fixes to address incorrect TCP copied_seq
calculations, which prevented correct data reads from recv(2) in user
space (Jiayuan Chen)
- Two fixes for BPF map lookup nullness elision (Daniel Xu)
- Fix a NULL-pointer dereference from vmlinux BTF lookup in
bpf_sk_storage_tracing_allowed (Jared Kangas)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests: bpf: test batch lookup on array of maps with holes
bpf: skip non exist keys in generic_map_lookup_batch
bpf: Handle allocation failure in acquire_lock_state
bpf: verifier: Disambiguate get_constant_map_key() errors
bpf: selftests: Test constant key extraction on irrelevant maps
bpf: verifier: Do not extract constant map keys for irrelevant maps
bpf: Fix softlockup in arena_map_free on 64k page kernel
net: Add rx_skb of kfree_skb to raw_tp_null_args[].
bpf: Fix deadlock when freeing cgroup storage
selftests/bpf: Add strparser test for bpf
selftests/bpf: Fix invalid flag of recv()
bpf: Disable non stream socket for strparser
bpf: Fix wrong copied_seq calculation
strparser: Add read_sock callback
bpf: avoid holding freeze_mutex during mmap operation
bpf: unify VM_WRITE vs VM_MAYWRITE use in BPF map mmaping logic
selftests/bpf: Adjust data size to have ETH_HLEN
bpf, test_run: Fix use-after-free issue in eth_skb_pkt_type()
bpf: Remove unnecessary BTF lookups in bpf_sk_storage_tracing_allowed
Extend the XDP Tx metadata framework so that user can requests launch time
hardware offload, where the Ethernet device will schedule the packet for
transmission at a pre-determined time called launch time. The value of
launch time is communicated from user space to Ethernet driver via
launch_time field of struct xsk_tx_metadata.
Suggested-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250216093430.957880-2-yoong.siang.song@intel.com
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-02-19
this is a pull request of 12 patches for net-next/master.
The first 4 patches are by Krzysztof Kozlowski and simplify the c_can
driver's c_can_plat_probe() function.
Ciprian Marian Costea contributes 3 patches to add S32G2/S32G3 support
to the flexcan driver.
Ruffalo Lavoisier's patch removes a duplicated word from the mcp251xfd
DT bindings documentation.
Oleksij Rempel extends the J1939 documentation.
The next patch is by Oliver Hartkopp and adds access for the Remote
Request Substitution bit in CAN-XL frames.
Henrik Brix Andersen's patch for the gs_usb driver adds support for
the CANnectivity firmware.
The last patch is by Robin van der Gracht and removes a duplicated
setup of RX FIFO in the rockchip_canfd driver.
linux-can-next-for-6.15-20250219
* tag 'linux-can-next-for-6.15-20250219' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: rockchip_canfd: rkcanfd_chip_fifo_setup(): remove duplicated setup of RX FIFO
can: gs_usb: add VID/PID for the CANnectivity firmware
can: canxl: support Remote Request Substitution bit access
can: j1939: Extend stack documentation with buffer size behavior
dt-binding: can: mcp251xfd: remove duplicate word
can: flexcan: add NXP S32G2/S32G3 SoC support
can: flexcan: Add quirk to handle separate interrupt lines for mailboxes
dt-bindings: can: fsl,flexcan: add S32G2/S32G3 SoC support
can: c_can: Use syscon_regmap_lookup_by_phandle_args
can: c_can: Use of_property_present() to test existence of DT property
can: c_can: Simplify handling syscon error path
can: c_can: Drop useless final probe failure message
====================
Link: https://patch.msgid.link/20250219113354.529611-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Extend the J1939 stack documentation to include information about how
buffer sizes influence stack behavior, detailing handling of simple
sessions, TP, and ETP transfers.
Additionally, describe various setsockopt(2) options, including their
usage and potential error values that can be returned by the stack.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/20241013181715.3488980-1-o.rempel@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add S32G2/S32G3 SoCs compatible strings.
A particularity for these SoCs is the presence of separate interrupts for
state change, bus errors, MBs 0-7 and MBs 8-127 respectively.
Increase maxItems of 'interrupts' to 4 for S32G based SoCs and keep the
same restriction for other SoCs.
Also, as part of this commit, move the 'allOf' after the required
properties to make the documentation easier to read.
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250113120704.522307-2-ciprianmarian.costea@oss.nxp.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Could be just me, but I had to pause and double check that the Tx csum
counter in qstat should include GSO'd packets. GSO pretty much implies
csum so one could possibly interpret the csum counter as pure csum offload.
But the counters are based on virtio:
[tx_needs_csum]
The number of packets which require checksum calculation by the device.
[rx_needs_csum]
The number of packets with VIRTIO_NET_HDR_F_NEEDS_CSUM.
and VIRTIO_NET_HDR_F_NEEDS_CSUM gets set on GSO packets virtio sends.
Clarify this in the spec to avoid any confusion.
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20250214224601.2271201-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Expose a new per-queue nest attribute, xsk, which will be present for
queues that are being used for AF_XDP. If the queue is not being used for
AF_XDP, the nest will not be present.
In the future, this attribute can be extended to include more data about
XSK as it is needed.
Signed-off-by: Joe Damato <jdamato@fastly.com>
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250214211255.14194-3-jdamato@fastly.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull driver core api addition from Greg KH:
"Here is a driver core new api for 6.14-rc3 that is being added to
allow platform devices from stop being abused.
It adds a new 'faux_device' structure and bus and api to allow almost
a straight or simpler conversion from platform devices that were not
really a platform device. It also comes with a binding for rust, with
an example driver in rust showing how it's used.
I'm adding this now so that the patches that convert the different
drivers and subsystems can all start flowing into linux-next now
through their different development trees, in time for 6.15-rc1.
We have a number that are already reviewed and tested, but adding
those conversions now doesn't seem right. For now, no one is using
this, and it passes all build tests from 0-day and linux-next, so all
should be good"
* tag 'driver-core-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
rust/kernel: Add faux device bindings
driver core: add a faux bus for use when a simple device/bus is needed
The clock-names property is required because the driver requests
the clock by name and not the index.
Update the example to use &clk instead of &nf_clk for the clocks
property to avoid confusion with the clock-names property "nf_clk".
Fixes: 1f05f823a1 (dt-bindings: mtd: cadence: convert cadence-nand-controller.txt to yaml)
Signed-off-by: Niravkumar L Rabara <niravkumar.l.rabara@intel.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Pull arm64 fixes from Will Deacon:
- Fix kexec and hibernation when using 5-level page-table configuration
- Remove references to non-existent SF8MM4 and SF8MM8 ID register
fields, hooking up hwcaps for the FPRCVT, F8MM4 and F8MM8 fields
instead
- Drop unused .ARM.attributes ELF sections
- Fix array indexing when probing CPU cache topology from firmware
- Fix potential use-after-free in AMU initialisation code
- Work around broken GTDT entries by tolerating excessively large timer
arrays
- Force use of Rust's "softfloat" target to avoid a threatening warning
about the NEON target feature
- Typo fix in GCS documentation and removal of duplicate Kconfig select
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: rust: clean Rust 1.85.0 warning using softfloat target
arm64: Add missing registrations of hwcaps
ACPI: GTDT: Relax sanity checking on Platform Timers array count
arm64: amu: Delay allocating cpumask for AMU FIE support
arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array
arm64: Handle .ARM.attributes section in linker scripts
arm64/hwcap: Remove stray references to SF8MMx
arm64/gcs: Fix documentation for HWCAP
arm64: Kconfig: Remove selecting replaced HAVE_FUNCTION_GRAPH_RETVAL
arm64: Fix 5-level paging support in kexec/hibernate trampoline
Fixes for the IOMMU used together with the PCIe controllers on rk3588,
some board-level fixes for wrong pins, pinctrl and regulators, and
disabling DMA on a board where the DMA+uart causes the dma controller to
hang, as well as improved network stability for the OrangePi R1.
* tag 'v6.14-rockchip-dtsfixes1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: adjust SMMU interrupt type on rk3588
arm64: dts: rockchip: disable IOMMU when running rk3588 in PCIe endpoint mode
dt-bindings: rockchip: pmu: Ensure all properties are defined
arm64: dts: rockchip: Fix lcdpwr_en pin for Cool Pi GenBook
arm64: dts: rockchip: fix fixed-regulator renames on rk3399-gru devices
arm64: dts: rockchip: Disable DMA for uart5 on px30-ringneck
arm64: dts: rockchip: Move uart5 pin configuration to px30 ringneck SoM
arm64: dts: rockchip: change eth phy mode to rgmii-id for orangepi r1 plus lts
arm64: dts: rockchip: Fix broken tsadc pinctrl names for rk3588
Link: https://lore.kernel.org/r/3004814.3ZeAukHxDK@diego
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull regulator fixes from Mark Brown:
"The main change here is a revert for a cleanup that was done in the
core, attempting to resolve some confusion about how we handle systems
where we've somehow managed to end up with both platform data and
device tree data for the same device. Unfortunately it turns out there
are actually a few systems that deliberately do this and were broken
by the change so we've just reverted it.
There's also a new Qualcomm device ID"
* tag 'regulator-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: let dt properties override driver init_data
regulator: qcom_smd: Add l2, l5 sub-node to mp5496 regulator
