Reduce the time waiting for the QEMU pidfile from three minutes to five
seconds. The three minute time window was chosen to make sure QEMU had
enough time to fully boot up. This, however, is an unreasonably long
delay for QEMU to write the pidfile, which happens earlier when the QEMU
process starts (not after VM boot). The three minute delay becomes
noticeably wasteful in future tests that expect QEMU to fail and wait a
full three minutes for a pidfile that will never exist.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-6-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change QEMU to use generated pidfile names instead of just a single
globally-defined pidfile. This allows multiple QEMU instances to
co-exist with different pidfiles. This is required for future tests that
use multiple VMs to check for CID collissions.
Additionally, this also places the burden of killing the QEMU process
and cleaning up the pidfile on the caller of vm_start(). To help with
this, a function terminate_pidfiles() is introduced that callers use to
perform the cleanup. The terminate_pidfiles() function supports multiple
pidfile removals because future patches will need to process two
pidfiles at a time.
Change QEMU_OPTS to be initialized inside the vm_start(). This allows
the generated pidfile to be passed to the string assignment, and
prepares for future vm-specific options as well (e.g., cid).
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-4-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rewrite wait_for_listener()'s pattern matching to avoid tripping the
if-condition when pipefail is on.
awk doesn't gracefully handle SIGPIPE with a non-zero exit code, so grep
exiting upon finding a match causes false-positives when the pipefail
option is used (grep exits, SIGPIPE emits, and awk complains with a
non-zero exit code). Instead, move all of the pattern matching into awk
so that SIGPIPE cannot happen and the correct exit code is returned.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-2-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Improve usability of logging functions. Remove the test name prefix from
logging functions so that logging calls can be made deeper into the call
stack without passing down the test name or setting some global. Teach
log function to accept a LOG_PREFIX variable to avoid unnecessary
argument shifting.
Remove log_setup() and instead use log_host(). The host/guest prefixes
are useful to show whether a failure happened on the guest or host side,
but "setup" doesn't really give additional useful information. Since all
log_setup() calls happen on the host, lets just use log_host() instead.
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251108-vsock-selftests-fixes-and-improvements-v4-1-d5e8d6c87289@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Based on past discussions it seems like integration of YNL into
iproute2 is unlikely. YNL itself is not great as a C library,
since it has no backward compat (we routinely change types).
Most of the operations can be performed with the generic Python
CLI directly. There is, however, a handful of operations where
summarization of kernel output is very useful (mostly related
to stats: page-pool, qstat).
Create a command (inspired by bpftool, I think it stood the test
of time reasonably well) to be able to plug the subcommands into.
Link: https://lore.kernel.org/1754895902-8790-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20251107162227.980672-2-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This tests introduces a tiny smc_hs_ctrl for filtering SMC connections
based on IP pairs, and also adds a realistic topology model to verify it.
Also, we can only use SMC loopback under CI test, so an additional
configuration needs to be enabled.
Follow the steps below to run this test.
make -C tools/testing/selftests/bpf
cd tools/testing/selftests/bpf
sudo ./test_progs -t smc
Results shows:
Summary: 1/1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: D. Wythe <alibuda@linux.alibaba.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Tested-by: Saket Kumar Bhaskar <skb99@linux.ibm.com>
Reviewed-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Link: https://patch.msgid.link/20251107035632.115950-4-alibuda@linux.alibaba.com
Add a test to verify that skb metadata remains accessible after calling
bpf_skb_adjust_room(), which modifies the packet headroom and can trigger
head reallocation.
The helper expects an Ethernet frame carrying an IP packet so switch test
packet identification by source MAC address since we can no longer rely on
Ethernet proto being set to zero.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-14-5ceb08a9b37b@cloudflare.com
Since pskb_expand_head() no longer clears metadata on unclone, update tests
for cloned packets to expect metadata to remain intact.
Also simplify the clone_dynptr_kept_on_{data,meta}_slice_write tests.
Creating an r/w dynptr slice is sufficient to trigger an unclone in the
prologue, so remove the extraneous writes to the data/meta slice.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-12-5ceb08a9b37b@cloudflare.com
Move metadata verification into the BPF TC programs. Previously,
userspace read metadata from a map and verified it once at test end.
Now TC programs compare metadata directly using __builtin_memcmp() and
set a test_pass flag. This enables verification at multiple points during
test execution rather than a single final check.
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20251105-skb-meta-rx-path-v4-10-5ceb08a9b37b@cloudflare.com
This script sets net.ipv4.tcp_rto_max_ms to 1000 and checks
if SYN+ACK RTO is capped at 1s for TFO and non-TFO.
Without the previous patch, the max RTO is applied to TFO
SYN+ACK only, and non-TFO SYN+ACK RTO increases exponentially.
# selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
# TAP version 13
# 1..2
# tcp_rto_synack_rto_max.pkt:46: error handling packet: timing error:
expected outbound packet at 5.091936 sec but happened at 6.107826 sec; tolerance 0.127974 sec
# script packet: 5.091936 S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
# actual packet: 6.107826 S. 0:0(0) ack 1 win 65535 <mss 1460,nop,nop,sackOK>
# not ok 1 ipv4
# tcp_rto_synack_rto_max.pkt:46: error handling packet: timing error:
expected outbound packet at 5.075901 sec but happened at 6.091841 sec; tolerance 0.127976 sec
# script packet: 5.075901 S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
# actual packet: 6.091841 S. 0:0(0) ack 1 win 65535 <mss 1460,nop,nop,sackOK>
# not ok 2 ipv6
# # Totals: pass:0 fail:2 xfail:0 xpass:0 skip:0 error:0
not ok 49 selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt # exit=1
With the previous patch, all SYN+ACKs are retransmitted
after 1s.
# selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
# TAP version 13
# 1..2
# ok 1 ipv4
# ok 2 ipv6
# # Totals: pass:2 fail:0 xfail:0 xpass:0 skip:0 error:0
ok 49 selftests: net/packetdrill: tcp_rto_synack_rto_max.pkt
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20251106003357.273403-7-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cross-merge networking fixes after downstream PR (net-6.18-rc5).
Conflicts:
drivers/net/wireless/ath/ath12k/mac.c
9222582ec5 ("Revert "wifi: ath12k: Fix missing station power save configuration"")
6917e268c4 ("wifi: ath12k: Defer vdev bring-up until CSA finalize to avoid stale beacon")
https://lore.kernel.org/11cece9f7e36c12efd732baa5718239b1bf8c950.camel@sipsolutions.net
Adjacent changes:
drivers/net/ethernet/intel/Kconfig
b1d16f7c00 ("libie: depend on DEBUG_FS when building LIBIE_FWLOG")
93f53db9f9 ("ice: switch to Page Pool")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
Including fixes from bluetooth and wireless.
Current release - new code bugs:
- ptp: expose raw cycles only for clocks with free-running counter
- bonding: fix null-deref in actor_port_prio setting
- mdio: ERR_PTR-check regmap pointer returned by
device_node_to_regmap()
- eth: libie: depend on DEBUG_FS when building LIBIE_FWLOG
Previous releases - regressions:
- virtio_net: fix perf regression due to bad alignment of
virtio_net_hdr_v1_hash
- Revert "wifi: ath10k: avoid unnecessary wait for service ready
message" caused regressions for QCA988x and QCA9984
- Revert "wifi: ath12k: Fix missing station power save configuration"
caused regressions for WCN7850
- eth: bnxt_en: shutdown FW DMA in bnxt_shutdown(), fix memory
corruptions after kexec
Previous releases - always broken:
- virtio-net: fix received packet length check for big packets
- sctp: fix races in socket diag handling
- wifi: add an hrtimer-based delayed work item to avoid low
granularity of timers set relatively far in the future, and use it
where it matters (e.g. when performing AP-scheduled channel switch)
- eth: mlx5e:
- correctly propagate error in case of module EEPROM read failure
- fix HW-GRO on systems with PAGE_SIZE == 64kB
- dsa: b53: fixes for tagging, link configuration / RMII, FDB,
multicast
- phy: lan8842: implement latest errata"
* tag 'net-6.18-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
selftests/vsock: avoid false-positives when checking dmesg
net: bridge: fix MST static key usage
net: bridge: fix use-after-free due to MST port state bypass
lan966x: Fix sleeping in atomic context
bonding: fix NULL pointer dereference in actor_port_prio setting
net: dsa: microchip: Fix reserved multicast address table programming
net: wan: framer: pef2256: Switch to devm_mfd_add_devices()
net: libwx: fix device bus LAN ID
net/mlx5e: SHAMPO, Fix header formulas for higher MTUs and 64K pages
net/mlx5e: SHAMPO, Fix skb size check for 64K pages
net/mlx5e: SHAMPO, Fix header mapping for 64K pages
net: ti: icssg-prueth: Fix fdb hash size configuration
net/mlx5e: Fix return value in case of module EEPROM read error
net: gro_cells: Reduce lock scope in gro_cell_poll
libie: depend on DEBUG_FS when building LIBIE_FWLOG
wifi: mac80211_hwsim: Limit destroy_on_close radio removal to netgroup
netpoll: Fix deadlock in memory allocation under spinlock
net: ethernet: ti: netcp: Standardize knav_dma_open_channel to return NULL on error
virtio-net: fix received length check in big packets
bnxt_en: Fix warning in bnxt_dl_reload_down()
...
Sometimes VMs will have some intermittent dmesg warnings that are
unrelated to vsock. Change the dmesg parsing to filter on strings
containing 'vsock' to avoid false positive failures that are unrelated
to vsock. The downside is that it is possible for some vsock related
warnings to not contain the substring 'vsock', so those will be missed.
Fixes: a4a65c6fe0 ("selftests/vsock: add initial vmtest.sh for vsock")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Bobby Eshleman <bobbyeshleman@meta.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://patch.msgid.link/20251105-vsock-vmtest-dmesg-fix-v2-1-1a042a14892c@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert struct sockaddr from flexible array to fixed 14-byte "sa_data",
to solve over 36,000 -Wflex-array-member-not-at-end warnings, since
struct sockaddr is embedded within many network structs.
With socket/proto sockaddr-based internal APIs switched to use struct
sockaddr_unsized, there should be no more uses of struct sockaddr that
depend on reading beyond the end of struct sockaddr::sa_data that might
trigger bounds checking.
Comparing an x86_64 "allyesconfig" vmlinux build before and after this
patch showed no new "ud1" instructions from CONFIG_UBSAN_BOUNDS nor any
new "field-spanning" memcpy CONFIG_FORTIFY_SOURCE instrumentations.
Cc: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-8-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops connect() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-3-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update all struct proto_ops bind() callback function prototypes from
"struct sockaddr *" to "struct sockaddr_unsized *" to avoid lying to the
compiler about object sizes. Calls into struct proto handlers gain casts
that will be removed in the struct proto conversion patch.
No binary changes expected.
Signed-off-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20251104002617.2752303-2-kees@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By design, an MPTCP connection will not accept extra subflows where no
MPTCP listening sockets can accept such requests.
In other words, it means that if the 'server' listens on a specific
address / device, it cannot accept MP_JOIN sent to a different address /
device. Except if there is another MPTCP listening socket accepting
them.
This is what the new tests are validating:
- Forcing a bind on the main v4/v6 address, and checking that MP_JOIN
to announced addresses are not accepted.
- Also forcing a bind on the main v4/v6 address, but before, another
listening socket is created to accept additional subflows. Note that
'mptcpize run nc -l' -- or something else only doing: socket(MPTCP),
bind(<IP>), listen(0) -- would be enough, but here mptcp_connect is
reused not to depend on another tool just for that.
- Same as the previous one, but using v6 link-local addresses: this is
a bit particular because it is required to specify the outgoing
network interface when connecting to a link-local address announced
by the other peer. When using the routing rules, this doesn't work
(the outgoing interface is not known) ; but it does work with a
'laminar' endpoint having a specified interface.
Note that extra small modifications are needed for these tests to work:
- mptcp_connect's check_getpeername_connect() check should strip the
specified interface when comparing addresses.
- With IPv6 link-local addresses, it is required to wait for them to
be ready (no longer in 'tentative' mode) before using them, otherwise
the bind() will not be allowed.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/591
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-4-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Our documentation is saying that the in-kernel PM is only using fullmesh
endpoints to establish subflows to announced addresses when at least one
endpoint has a fullmesh flag. But this was not totally correct: only
fullmesh endpoints were used if at least one endpoint *from the same
address family as the received ADD_ADDR* has the fullmesh flag.
This is confusing, and it seems clearer not to have differences
depending on the address family.
So, now, when at least one MPTCP endpoint has a fullmesh flag, the local
addresses are picked from all fullmesh endpoints, which might be 0 if
there are no endpoints for the correct address family.
One selftest needs to be adapted for this behaviour change.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251101-net-next-mptcp-fm-endp-nb-bind-v1-2-b4166772d6bb@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new state NAPI_STATE_THREADED_BUSY_POLL to the NAPI state enum to
enable and disable threaded busy polling.
When threaded busy polling is enabled for a NAPI, enable
NAPI_STATE_THREADED also.
When the threaded NAPI is scheduled, set NAPI_STATE_IN_BUSY_POLL to
signal napi_complete_done not to rearm interrupts.
Whenever NAPI_STATE_THREADED_BUSY_POLL is unset, the
NAPI_STATE_IN_BUSY_POLL will be unset, napi_complete_done unsets the
NAPI_STATE_SCHED_THREADED bit also, which in turn will make the kthread
go to sleep.
Signed-off-by: Samiullah Khawaja <skhawaja@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Martin Karsten <mkarsten@uwaterloo.ca>
Tested-by: Martin Karsten <mkarsten@uwaterloo.ca>
Link: https://patch.msgid.link/20251028203007.575686-2-skhawaja@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Mark migrate_disable/enable() as always_inline to avoid issues with
partial inlining (Yonghong Song)
- Fix powerpc stack register definition in libbpf bpf_tracing.h (Andrii
Nakryiko)
- Reject negative head_room in __bpf_skb_change_head (Daniel Borkmann)
- Conditionally include dynptr copy kfuncs (Malin Jonsson)
- Sync pending IRQ work before freeing BPF ring buffer (Noorain Eqbal)
- Do not audit capability check in x86 do_jit() (Ondrej Mosnacek)
- Fix arm64 JIT of BPF_ST insn when it writes into arena memory
(Puranjay Mohan)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf/arm64: Fix BPF_ST into arena memory
bpf: Make migrate_disable always inline to avoid partial inlining
bpf: Reject negative head_room in __bpf_skb_change_head
bpf: Conditionally include dynptr copy kfuncs
libbpf: Fix powerpc's stack register definition in bpf_tracing.h
bpf: Do not audit capability check in do_jit()
bpf: Sync pending IRQ work before freeing ring buffer
The script "ethtool-common.sh" is not installed in INSTALL_PATH, and
triggers some errors when I try to run the test
'drivers/net/netdevsim/ethtool-coalesce.sh':
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory
# ./ethtool-coalesce.sh: line 25: make_netdev: command not found
# ethtool: bad command line argument(s)
# ./ethtool-coalesce.sh: line 124: check: command not found
# ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected
# FAILED /0 checks
not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1
Install this file to avoid this error. After this patch:
TAP version 13
1..1
# timeout set to 600
# selftests: drivers/net/netdevsim: ethtool-coalesce.sh
# PASSED all 22 checks
ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh
Fixes: fbb8531e58 ("selftests: extract common functions in ethtool-common.sh")
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Link: https://patch.msgid.link/20251030040340.3258110-1-wangliang74@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The GRO self-test, gro.c, currently constructs IPv6 packets containing a
Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path
correctly handles IPv6 extension headers.
However, network elements may be configured to drop packets with the
Hop-by-Hop Options header (HBH). This causes the self-test to fail
in environments where such network elements are present.
To improve the robustness and reliability of this test in diverse
network environments, switch from using IPPROTO_HOPOPTS to
IPPROTO_DSTOPTS (Destination Options).
The Destination Options header is less likely to be dropped by
intermediate routers and still serves the core purpose of the test:
validating GRO's handling of an IPv6 extension header. This change
ensures the test can execute successfully without being incorrectly
failed by network policies outside the kernel's control.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030060436.1556664-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Due to the gro_sender sending data packets and FIN packets
in very quick succession, these are received almost simultaneously
by the gro_receiver. FIN packets are sometimes processed before the
data packets leading to intermittent (~1/100) test failures.
This change adds a delay of 100ms before sending FIN packets
in gro:tcp test to avoid the out-of-order delivery. The same
mitigation already exists for the gro:ip test.
Fixes: 7d1575014a ("selftests/net: GRO coalesce test")
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Anubhav Singh <anubhavsinggh@google.com>
Link: https://patch.msgid.link/20251030062818.1562228-1-anubhavsinggh@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull VFIO fixes from Alex Williamson:
- Fix overflows in vfio type1 backend for mappings at the end of the
64-bit address space, resulting in leaked pinned memory.
New selftest support included to avoid such issues in the future
(Alex Mastro)
* tag 'vfio-v6.18-rc4' of https://github.com/awilliam/linux-vfio:
vfio: selftests: add end of address space DMA map/unmap tests
vfio: selftests: update DMA map/unmap helpers to support more test kinds
vfio/type1: handle DMA map/unmap up to the addressable limit
vfio/type1: move iova increment to unmap_unpin_*() caller
vfio/type1: sanitize for overflow using check_*_overflow()
Pull kselftest fixes from Shuah Khan:
"Fix build warning in cachestat found during clang build and add
tmpshmcstat to .gitignore"
* tag 'linux_kselftest-fixes-6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: cachestat: Fix warning on declaration under label
selftests/cachestat: add tmpshmcstat file to .gitignore
We are trying to move away from netdevsim-only tests and towards
tests which can be run both against netdevsim and real drivers.
Replace the simple bash script we have for checking ethtool -g/-G
on netdevsim with a Python test tweaking those params as well
as channel count.
The new test is not exactly equivalent to the netdevsim one,
but real drivers don't often support random ring sizes,
let alone modifying max values via debugfs.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20251029164930.2923448-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Test that ICMP extensions are reported correctly when enabled and not
reported when disabled. Test both IPv4 and IPv6 and using different
packet sizes, to make sure trimming / padding works correctly.
Disable ICMP rate limiting (defaults to 1 per-second per-target) so that
the kernel will always generate ICMP errors when needed.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20251027082232.232571-4-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In bareudp.sh, this script uses /bin/sh and it will load another lib.sh
BASH script at the very beginning.
But on some operating systems like Ubuntu, /bin/sh is actually pointed to
DASH, thus it will try to run BASH commands with DASH and consequently
leads to syntax issues:
# ./bareudp.sh: 4: ./lib.sh: Bad substitution
# ./bareudp.sh: 5: ./lib.sh: source: not found
# ./bareudp.sh: 24: ./lib.sh: Syntax error: "(" unexpected
Fix this by explicitly using BASH for bareudp.sh. This fixes test
execution failures on systems where /bin/sh is not BASH.
Reported-by: Edoardo Canepa <edoardo.canepa@canonical.com>
Link: https://bugs.launchpad.net/bugs/2129812
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/20251027095710.2036108-2-po-hsu.lin@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Socket APIs like recvfrom(), accept(), and getsockname() expect socklen_t*
arg, but tests were using int variables. This causes -Wpointer-sign
warnings on platforms where socklen_t is unsigned.
Change the variable type from int to socklen_t to resolve the warning and
ensure type safety across platforms.
warning fixed:
sctp_collision.c:62:70: warning: passing 'int *' to parameter of
type 'socklen_t *' (aka 'unsigned int *') converts between pointers to
integer types with different sign [-Wpointer-sign]
62 | ret = recvfrom(sd, buf, sizeof(buf),
0, (struct sockaddr *)&daddr, &len);
| ^~~~
/usr/include/sys/socket.h:165:27: note: passing argument to
parameter '__addr_len' here
165 | socklen_t *__restrict __addr_len);
| ^
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251028172947.53153-1-ankitkhushwaha.linux@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
