Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
When building without CONFIG_PM_SLEEP, there are several warnings (or
errors with CONFIG_WERROR=y / W=e) from the cix-ipbloq driver:
sound/hda/controllers/cix-ipbloq.c:378:12: error: 'cix_ipbloq_hda_runtime_resume' defined but not used [-Werror=unused-function]
378 | static int cix_ipbloq_hda_runtime_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:362:12: error: 'cix_ipbloq_hda_runtime_suspend' defined but not used [-Werror=unused-function]
362 | static int cix_ipbloq_hda_runtime_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:349:12: error: 'cix_ipbloq_hda_resume' defined but not used [-Werror=unused-function]
349 | static int cix_ipbloq_hda_resume(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~
sound/hda/controllers/cix-ipbloq.c:336:12: error: 'cix_ipbloq_hda_suspend' defined but not used [-Werror=unused-function]
336 | static int cix_ipbloq_hda_suspend(struct device *dev)
| ^~~~~~~~~~~~~~~~~~~~~~
When CONFIG_PM and CONFIG_PM_SLEEP are unset, SET_SYSTEM_SLEEP_PM_OPS()
and SET_RUNTIME_PM_OPS() evaluate to nothing, so these functions appear
unused to the compiler in this configuration.
Use the modern SYSTEM_SLEEP_PM_OPS and RUNTIME_PM_OPS macros to resolve
these warnings, which is what they are intended to do. Additionally,
wrap &cix_ipbloq_hda_pm in pm_ptr() to ensure the compiler can drop the
entire structure when CONFIG_PM is unset.
Fixes: d91e9bd101 ("ALSA: hda: add CIX IPBLOQ HDA controller support")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://patch.msgid.link/20251211-hda-cix-ipbloq-modern-pm-ops-v1-1-c7a5580af021@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When config table entries don't match with the device to be probed,
currently we fall back to SND_INTEL_DSP_DRIVER_ANY, which means to
allow any drivers to bind with it.
This was set so with the assumption (or hope) that all controller
drivers should cover the devices generally, but in practice, this
caused a problem as reported recently. Namely, when a specific
kconfig for SOF isn't set for the modern Intel chips like Alderlake,
a wrong driver (AVS) got probed and failed. This is because we have
entries like:
#if IS_ENABLED(CONFIG_SND_SOC_SOF_ALDERLAKE)
/* Alder Lake / Raptor Lake */
{
.flags = FLAG_SOF | FLAG_SOF_ONLY_IF_DMIC_OR_SOUNDWIRE,
.device = PCI_DEVICE_ID_INTEL_HDA_ADL_S,
},
....
#endif
so this entry is effective only when CONFIG_SND_SOC_SOF_ALDERLAKE is
set. If not set, there is no matching entry, hence it returns
SND_INTEL_DSP_DRIVER_ANY as fallback. OTOH, if the kconfig is set, it
explicitly falls back to SND_INTEL_DSP_DRIVER_LEGACY when no DMIC or
SoundWire is found -- that was the working scenario. That being said,
the current setup may be broken for modern Intel chips that are
supposed to work with either SOF or legacy driver when the
corresponding kconfig were missing.
For addressing the problem above, this patch changes the fallback
driver to the legacy driver, i.e. return SND_INTEL_DSP_DRIVER_LEGACY
type as much as possible. When CONFIG_SND_HDA_INTEL is also disabled,
the fallback is set to SND_INTEL_DSP_DRIVER_ANY type, just to be sure.
Reported-by: Askar Safin <safinaskar@gmail.com>
Closes: https://lore.kernel.org/all/20251014034156.4480-1-safinaskar@gmail.com/
Tested-by: Askar Safin <safinaskar@gmail.com>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251210131553.184404-1-tiwai@suse.de
Add CIX IPBLOQ HDA controller support, which is integrated into
CIX SKY1 audio subsystem. HDA controller supports 64bit, but the
audio subsystem can only 32bit transaction. Use jack polling mode
as there is a hardware issue, lead to interrupt strom if the RIRB
interrupt enabled. Host and hdac has different view of memory, so
need do dma address translation.
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251205154621.3019640-4-joakim.zhang@cixtech.com
Pull bitmap updates from Yury Norov:
- Runtime field_{get,prep}() (Geert)
- Rust ID pool updates (Alice)
- min_t() simplification (David)
- __sw_hweightN kernel-doc fixes (Andy)
- cpumask.h headers cleanup (Andy)
* tag 'bitmap-for-6.19' of github.com:/norov/linux: (32 commits)
rust_binder: use bitmap for allocation of handles
rust: id_pool: do not immediately acquire new ids
rust: id_pool: do not supply starting capacity
rust: id_pool: rename IdPool::new() to with_capacity()
rust: bitmap: add BitmapVec::new_inline()
rust: bitmap: add MAX_LEN and MAX_INLINE_LEN constants
cpumask: Don't use "proxy" headers
soc: renesas: Use bitfield helpers
clk: renesas: Use bitfield helpers
ALSA: usb-audio: Convert to common field_{get,prep}() helpers
soc: renesas: rz-sysc: Convert to common field_get() helper
pinctrl: ma35: Convert to common field_{get,prep}() helpers
iio: mlx90614: Convert to common field_{get,prep}() helpers
iio: dac: Convert to common field_prep() helper
gpio: aspeed: Convert to common field_{get,prep}() helpers
EDAC/ie31200: Convert to common field_get() helper
crypto: qat - convert to common field_get() helper
clk: at91: Convert to common field_{get,prep}() helpers
bitfield: Add non-constant field_{prep,get}() helpers
bitfield: Add less-checking __FIELD_{GET,PREP}()
...
The acpi_get_first_physical_node() function can return NULL, in which
case the get_device() function also returns NULL, but this value is
then dereferenced without checking,so add a check to prevent a crash.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7b2f3eb492 ("ALSA: hda: cs35l41: Add support for CS35L41 in HDA systems")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251202101338.11437-1-arefev@swemel.ru
Pull firewire updates from Takashi Sakamoto:
"This includes two changes for core functions, which affects all use
cases of this subsystem:
- Handle per-device interoperability quirks
Some devices have quirks affecting interoperability. To identify
such quirks at an early stages of device detection, the step for
reading the configuration ROM contents has been changed. As a side
effect, the entire detection process is now performed at the basic
transaction speed (S100), without a trial to probe higher
supported speeds.
With this change, the following devices should now work with fewer
issues:
- TASCAM FW-1884, FW-1804, and FW-1082
- MOTU Audio Express
- Safer removals of host card
There was a race condition between host card removal and handling
of bus reset events in the workqueue. This appears to be a long
standing issue, and recent changes to use more workqueues escalate
it.
To solve it, a new callback has been added to the 1394 OHCI PCI
driver to unregister the interrupt sources and wait for workqueue
completions when removing a card instance"
* tag 'firewire-updates-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: abort pending transactions at card removal
firewire: core: add WQ_UNBOUND to alloc_workqueue users
firewire: core: clear sources of hardware interrupt at card removal
firewire: core: code refactoring to find and pop transaction entry
firewire: core: code refactoring to remove transaction entry
firewire: core: use cleanup function to release cached configuration ROM
ALSA: firewire-tascam: reserve resources for transferred isochronous packets at S400
firewire: core: handle device quirk of TASCAM FW-1884/FW-1804/FW-1082
firewire: core: determine transaction speed after detecting quirks
firewire: core: code refactoring to compute transaction speed
firewire: core: handle device quirk of MOTU Audio Express
firewire: core: detect device quirk when reading configuration ROM
The only crypto-related functionality this codec uses is the sha256()
function, which is provided by CRYPTO_LIB_SHA256. Originally
CRYPTO_LIB_SHA256 was visible only when CRYPTO; however, that was fixed
years ago and the libraries can now be selected on their own.
So, remove the unnecessary selection of CRYPTO.
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20251204052954.488568-1-ebiggers@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Johan Hovold <johan@kernel.org>:
The original wcd938x driver has a couple of OF node reference leaks
which have been reproduced in the two later added drivers.
clang W=1 builds warn:
nau8325.c:430:13: error: variable 'n2_max' is uninitialized when used here [-Werror,-Wuninitialized]
which are false positive, because the variables will be always
initialized when used (guarded by mclk_max!=0 check). However
initializing them upfront makes the code more obvious and easier, plus
it silences the warning.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20251203140611.87191-2-krzysztof.kozlowski@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
bcm63xx_soc_pcm_new() does not check the return value of
of_dma_configure(), which may fail with -EPROBE_DEFER or
other errors, allowing PCM setup to continue with incomplete
DMA configuration.
Add error checking for of_dma_configure() and return on failure.
Fixes: 88eb404ccc ("ASoC: brcm: Add DSL/PON SoC audio driver")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20251202101642.492-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
According to HW probes, there exist upgraded variants of HP ProBook
440/450 G8 notebook PC hardware, with PCI SSIDs not yet covered:
- https://linux-hardware.org/?id=pci:8086-a0c8-103c-8a76
(HP ProBook 440 G8, SSID 103C:8A76, Tiger Lake HDA, ALC236)
- https://linux-hardware.org/?id=pci:8086-a0c8-103c-8a77
(HP ProBook 450 G8, SSID 103C:8A77, Tiger Lake HDA, ALC236)
The HDA GPIO indices for the mic mute (0x1) and speaker mute (0x2) LEDs
are virtually guaranteed to be identical for the HP ProBook 440/450 G8
variants with motherboard SSIDs 8A74/8A75 (BIOS T87) and 8A76/8A77 (BIOS
T88); especially since spare keyboard parts are interchangeable between
different revisions of the same notebook models, and thus necessarily
have the same slot pinouts.
Signed-off-by: Ilyas Gasanov <public@gsnoff.com>
Link: https://patch.msgid.link/20251202154930.74481-1-public@gsnoff.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Revert commit 6797540c8b ("ASoC: cs-amp-lib: Use __free(kfree) instead
of manual freeing").
Krzysztof Kozlowski pointed out that __free() can be dangerous.
It can introduce new cleanup bugs. These are more subtle and difficult to
spot than a missing goto in traditional cleanup, because they are triggered
by writing regular idiomatic C code instead of using C++ conventions. As
it's regular C style it's more likely to be missed because the code is as
would be expected for C. The traditional goto also more obviously flags
to anyone changing the code in the future that they must be careful about
the cleanup.
We can just revert the change. There was nothing wrong with the original
code and as Krzysztof noted: "it does not make the code simpler."
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 6797540c8b ("ASoC: cs-amp-lib: Use __free(kfree) instead of manual freeing")
Link: https://patch.msgid.link/20251201111429.43517-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Updates for v6.19
This is a very large set of updates, as well as some more extensive
cleanup work from Morimto-san we've also added a generic SCDA class
driver for SoundWire devices enabling us to support many chips with
no custom code. There's also a batch of new drivers added for both
SoCs and CODECs.
- Added a SoundWire SCDA generic class driver, pulling in a little
regmap work to support it.
- A *lot* of cleaup and API improvement work from Morimoto-san.
- Lots of work on the existing Cirrus, Intel, Maxim and Qualcomm
drivers.
- Support for Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830.
This also pulls in some gpiolib changes supporting shared GPIOs in the
core there so we can convert some of the ASoC drivers open coding
handling of that to the core functionality.
If the amp is still reporting FIRMWARE_MISSING after cs35l56_patch()
has completed it is helpful to log a warning.
After a complete firmware download the FIRMWARE_MISSING flag will be
clear. If this isn't the case, the driver should log a message to
report this.
The amp can produce basic audio output without firmware, as a fallback,
so this wasn't originally logged as a warning condition because the amp
is still in an operational state - just not with full functionality.
However, it was not at all obvious to an end user that anything is
unusual.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251128112520.40067-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The range control register can't directly adjust volume gain according
to specification. It's the dynamic range of the CIC filter. The range
value should meet some conditions otherwise the channel data is not
reliable. Add an array in soc data to store const value in formula
with which range with all quality on different platforms can be
calculated. If the value set to range control exceeds the max range
there'll be warning logs.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://patch.msgid.link/20251127022652.674574-3-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Set of changes addressing gaps in DRAM offset checks, error paths and
PM.
The first three patches are straight-forward, the last three relate to
the power management. The standing out PM change is removal of the
catpt-driver as a system-suspend (S3) blocker. This is a suggestion from
Andy as indeed, audio is not a critical component that should prevent
the system from going into S3. Whatever happens, the driver can recover
on a follow up resume (S3 -> S0).
