Add an attribute of "no-hpd" for the Rockchip dw-hdmi-qp controller.
This is used to describe implementations where the HPD pin is not
connected or used for other purposes, such as in the RK3588S based
Gameforce Ace which repurposed the GPIO for an additional face
button.
The "no-hpd" option was chosen to be consistent with other devices
which already define this parameter for broken or missing hpd
functionality.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20251119225526.70588-2-macroalpha82@gmail.com
Add the compatible string "renesas,r9a09g057-mipi-dsi" for the Renesas
RZ/V2H(P) (R9A09G057) SoC. While the MIPI DSI LINK registers are shared
with the RZ/G2L SoC, the D-PHY register layout differs. Additionally, the
RZ/V2H(P) uses only two resets compared to three on RZ/G2L, and requires
five clocks instead of six.
To reflect these hardware differences, update the binding schema to
support the reduced clock and reset requirements for RZ/V2H(P).
Since the RZ/V2N (R9A09G056) SoC integrates an identical DSI IP to
RZ/V2H(P), the same "renesas,r9a09g057-mipi-dsi" compatible string is
reused for RZ/V2N.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://patch.msgid.link/20251015192611.241920-6-prabhakar.mahadev-lad.rj@bp.renesas.com
Pull irq fixes from Ingo Molnar:
- Fix error code in the irqchip/mchp-eic driver
- Fix setup_percpu_irq() affinity assumptions
- Remove the unused irq_domain_add_tree() function
* tag 'irq-urgent-2025-12-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mchp-eic: Fix error code in mchp_eic_domain_alloc()
irqdomain: Delete irq_domain_add_tree()
genirq: Allow NULL affinity for setup_percpu_irq()
Pull misc updates from Andrew Morton:
"There are no significant series in this small merge. Please see the
individual changelogs for details"
[ Editor's note: it's mainly ocfs2 and a couple of random fixes ]
* tag 'mm-nonmm-stable-2025-12-11-11-47' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: memfd_luo: add CONFIG_SHMEM dependency
mm: shmem: avoid build warning for CONFIG_SHMEM=n
ocfs2: fix memory leak in ocfs2_merge_rec_left()
ocfs2: invalidate inode if i_mode is zero after block read
ocfs2: avoid -Wflex-array-member-not-at-end warning
ocfs2: convert remaining read-only checks to ocfs2_emergency_state
ocfs2: add ocfs2_emergency_state helper and apply to setattr
checkpatch: add uninitialized pointer with __free attribute check
args: fix documentation to reflect the correct numbers
ocfs2: fix kernel BUG in ocfs2_find_victim_chain
liveupdate: luo_core: fix redundant bound check in luo_ioctl()
ocfs2: validate inline xattr size and entry count in ocfs2_xattr_ibody_list
fs/fat: remove unnecessary wrapper fat_max_cache()
ocfs2: replace deprecated strcpy with strscpy
ocfs2: check tl_used after reading it from trancate log inode
liveupdate: luo_file: don't use invalid list iterator
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
Pull soundwire updates from Vinod Koul:
- Support for multiple sections in a BPT stream
- Align DMA frame with BPT frames
- Qualcomm support for v3.1.0 controllers
* tag 'soundwire-6.19-rc1_updated' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: handle multi BPT sections
soundwire: pass sdw_bpt_section to cdns BPT helpers
soundwire: introduce BPT section
soundwire: intel_ace2x: add fake frame to BRA read command
soundwire: cadence_master: add fake_size parameter to sdw_cdns_prepare_read_dma_buffer
ASoC: SOF: Intel: export hda_sdw_bpt_get_buf_size_aligment
soundwire: cadence: export sdw_cdns_bpt_find_bandwidth
soundwire: cadence_master: set data_per_frame as frame capability
soundwire: only compute BPT stream in sdw_compute_dp0_port_params
soundwire: cadence_master: make frame index trace more readable
soundwire: qcom: adding support for v3.1.0
dt-bindings: soundwire: qcom: Document v3.1.0 version of IP block
soundwire: qcom: prepare for v3.x
soundwire: qcom: deprecate qcom,din/out-ports
dt-bindings: soundwire: qcom: deprecate qcom,din/out-ports
soundwire: qcom: remove unused rd_fifo_depth
of: base: Add of_property_read_u8_index
Pull sound fixes from Takashi Iwai:
"The only slightly large change is the enablement of CIX HD-audio
controller, which took a bit time to be cooked up, while most of other
changes are device-specific small trivial fixes:
- Default disablement of the kconfig for decades old pre-release
alsa-lib PCM API; it's only the default config value change, so it
can't lead to any regressions for the existing setups
- Support for CIX HD-audio controller
- A few ASoC ACP fixes
- Fixes for ASoC cirrus, bcm, wcd, qcom, ak platforms
- Trivial hardening for FireWire and USB-audio
- HD-audio Intel binding fix and quirks"
* tag 'sound-fix-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (30 commits)
ALSA: hda/tas2781: Add new quirk for HP new project
ALSA: hda: cix-ipbloq: Use modern PM ops
ALSA: hda: intel-dsp-config: Prefer legacy driver as fallback
ASoC: amd: acp: update tdm channels for specific DAI
ASoC: cs35l56: Fix incorrect select SND_SOC_CS35L56_CAL_SYSFS_COMMON
ALSA: firewire-motu: add bounds check in put_user loop for DSP events
ASoC: cs35l41: Always return 0 when a subsystem ID is found
ALSA: uapi: Fix typo in asound.h comment
ALSA: Do not build obsolete API
ALSA: hda: add CIX IPBLOQ HDA controller support
ALSA: hda/core: add addr_offset field for bus address translation
ALSA: hda: dt-bindings: add CIX IPBLOQ HDA controller support
ALSA: hda/realtek: Add support for ASUS UM3406GA
ALSA: hda/realtek: Add support for HP Turbine Laptops
ALSA: usb-audio: Initialize status1 to fix uninitialized symbol errors
ALSA: firewire-motu: fix buffer overflow in hwdep read for DSP events
ALSA: hda: cs35l41: Fix NULL pointer dereference in cs35l41_hda_read_acpi()
ASoC: cros_ec_codec: Remove unnecessary selection of CRYPTO
ASoc: qcom: q6afe: fix bad guard conversion
ASoC: rockchip: Fix Wvoid-pointer-to-enum-cast warning (again)
...
Pull device mapper updates from Mikulas Patocka:
- convert crypto_shash users to direct crypto library use with simpler
and faster code and reduced stack usage (Eric Biggers):
- the dm-verity SHA-256 conversion also teaches it to do two-way
interleaved hashing for added performance
- dm-crypt MD5 conversion (used for Loop-AES compatibility)
- added document for for takeover/reshape raid1 -> raid5 examples (Heinz Mauelshagen)
- fix dm-vdo kerneldoc warnings (Matthew Sakai)
- various random fixes and cleanups
* tag 'for-6.19/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm pcache: fix segment info indexing
dm pcache: fix cache info indexing
dm-pcache: advance slot index before writing slot
dm raid: add documentation for takeover/reshape raid1 -> raid5 table line examples
dm log-writes: Add missing set_freezable() for freezable kthread
dm-raid: fix possible NULL dereference with undefined raid type
dm-snapshot: fix 'scheduling while atomic' on real-time kernels
dm: ignore discard return value
MAINTAINERS: add Benjamin Marzinski as a device mapper maintainer
dm-mpath: Simplify the setup_scsi_dh code
dm vdo: fix kerneldoc warnings
dm-bufio: align write boundary on physical block size
dm-crypt: enable DM_TARGET_ATOMIC_WRITES
dm: test for REQ_ATOMIC in dm_accept_partial_bio()
dm-verity: remove useless mempool
dm-verity: disable recursive forward error correction
dm-ebs: Mark full buffer dirty even on partial write
dm mpath: enable DM_TARGET_ATOMIC_WRITES
dm verity fec: Expose corrected block count via status
dm: Don't warn if IMA_DISABLE_HTABLE is not enabled
...
Also enhance possible takeover/reshape information and do some reformatting.
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Pull input updates from Dmitry Torokhov:
- DT bindings for Melfas MIP4 touchscreen controller and TWL4030 keypad
have been converted to the DT schema
- simple touch controller bindings have been consolidated to
trivial-touch.yaml DT schema
- memory allocation failure noise was removed from qnap-mcu-input and
zforce_ts dirvers
- ti_am335x_tsc driver was hardened to handle invalid (too large)
number of coordinates specified in device tree
- a cleanup in Cypress cyttsp5 driver to use %pe to print error code
* tag 'input-for-v6.19-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ti_am335x_tsc - clamp coordinate_readouts to DT maximum (6)
dt-bindings: touchscreen: consolidate simple touch controller to trivial-touch.yaml
dt-bindings: touchscreen: trivial-touch: add reset-gpios and wakeup-source
dt-bindings: input: ti,twl4030-keypad: convert to DT schema
Input: zforce_ts - omit error message when memory allocation fails
Input: qnap-mcu-input - omit error message when memory allocation fails
dt-bindings: input: Convert MELFAS MIP4 Touchscreen to DT schema
dt-bindings: touchscreen: move ar1021.txt to trivial-touch.yaml
dt-bindings: touchscreen: rename maxim,max11801.yaml to trivial-touch.yaml
Input: cyttsp5 - use %pe format specifier
Pull i2c updates from Wolfram Sang:
- general cleanups in bcm2835, designware, pcf8584, and stm32
- amd-mp2: fix device refcount
- designware: avoid interrupt storms caused by bad firmware
- spacemit: fix device detection failures
- new devices: Intel Diamond Rapids, Rockchip RK3506, Qualcomm
Kaanapali and MSM8953
- minor fixes to i801, core documentation, elektor Kconfig dependencies
- at24 updates: add new compatible for Belling BL24S64
* tag 'i2c-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (21 commits)
i2c: qcom-cci: Add msm8953 compatible
i2c: spacemit: fix detect issue
i2c: amd-mp2: fix reference leak in MP2 PCI device
i2c: i2c.h: fix a bad kernel-doc line
i2c: i2c-elektor: Allow building on SMP kernels
dt-bindings: i2c: qcom-cci: Document Kaanapali compatible
dt-bindings: i2c: qcom-cci: Document msm8953 compatible
dt-bindings: eeprom: at24: Add compatible for Belling BL24S64
i2c: i801: Fix the Intel Diamond Rapids features
i2c: pcf8584: Change pcf_doAdress() to pcf_send_address()
i2c: pcf8584: Make pcf_doAddress() function void
i2c: pcf8584: Move 'ret' variable inside for loop, goto out if ret < 0.
i2c: designware: Disable SMBus interrupts to prevent storms from mis-configured firmware
dt-bindings: i2c: i2c-rk3x: Add compatible string for RK3506
i2c: i801: Add support for Intel Diamond Rapids
i2c: stm32: Omit two variable reassignments in stm32_i2c_dma_request()
i2c: designware: Omit a variable reassignment in dw_i2c_plat_probe()
i2c: pcf8584: Fix do not use assignment inside if conditional
i2c: pcf8584: Remove debug macros from i2c-algo-pcf.c
i2c: busses: bcm2835: convert from round_rate() to determine_rate()
...
Pull x86 platform driver updates from Ilpo Järvinen:
- acer-wmi: Add PH16-72, PHN16-72, and PT14-51 fan control support
- acpi: platform_profile: Add max-power profile option (power draw
limited by the cooling hardware, may exceed battery power draw limit
when on AC power)
- amd/hsmp: Allow more than one data-fabric per socket
- asus-armoury: Add WMI attributes driver to expose miscellaneous WMI
functions through fw_attributes (deprecates the custom BIOS features
interface through asus-wmi)
- asus-wmi: Use brightness_set_blocking() for kbd led
- ayaneo-ec: Add Ayaneo Embedded Controller driver
- fs/nls:
- Fix utf16 to utf8 string conversion when output size restricted
- Improve error code consistency for utf8 to utf32 conversions
- ideapad-laptop: Fast (Rapid Charge) charge type support
- intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
- intel/pmc:
- Arrow Lake telemetry GUID improvements
- Add support for Wildcat Lake PMC information
- intel_pmc_ipc: Fix ACPI buffer memleak
- intel/punit_ipc: Fix memory corruption
- intel/vsec: Wildcat Lake PMT telemetry support
- lenovo-wmi-gamezone: Map "Extreme" performance mode to max-power
- lg-laptop: Add support for the HDAP opregion field
- serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing
projects
- thinkpad-t14s-ec: Improve suspend/resume support (lid LEDs, keyboard
backlight)
- uniwill: Add Uniwill laptop driver
- wmi: Move under drivers/platform/wmi as non-x86 WMI support is around
the corner and other WMI features will require adding more C files as
well
- tools/power/x86/intel-speed-select: v1.24
- Check feature status to check if the feature enablement was
successful
- Reset SST-TF bucket structure to display valid bucket info
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (73 commits)
tools/power/x86/intel-speed-select: v1.24 release
tools/power/x86/intel-speed-select: Reset isst_turbo_freq_info for invalid buckets
tools/power/x86/intel-speed-select: Check feature status
platform/x86: asus-wmi: use brightness_set_blocking() for kbd led
fs/nls: Fix inconsistency between utf8_to_utf32() and utf32_to_utf8()
platform/x86: asus-armoury: add support for GA503QR
platform/x86: intel_pmc_ipc: fix ACPI buffer memory leak
platform/x86: hp-wmi: Order DMI board name arrays
platform/x86/intel/hid: Add Dell Pro Rugged 10/12 tablet to VGBS DMI quirks
platform: surface: replace use of system_wq with system_percpu_wq
platform: x86: replace use of system_wq with system_percpu_wq
platform/surface: acpi-notify: add WQ_PERCPU to alloc_workqueue users
platform/x86: wmi-gamezone: Add Legion Go 2 Quirks
platform/x86: lenovo-wmi-gamezone Use max-power rather than balanced-performance
acpi: platform_profile - Add max-power profile option
platform/x86/amd/pmf: Use devm_mutex_init() for mutex initialization
platform/x86/amd/pmf: Add BIOS_INPUTS_MAX macro to replace hardcoded array size
platform/x86: serial-multi-instantiate: Add IRQ_RESOURCE_OPT for IRQ missing projects
platform/x86/amd/pmf: Refactor repetitive BIOS output handling
platform/x86/uniwill: Add TUXEDO devices
...
Pull more power management updates from Rafael Wysocki:
"Fix a runtime PM unit test added during the 6.18 development cycle and
change the pm_runtime_barrier() return type to void (Brian Norris)"
* tag 'pm-6.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
coccinelle: Drop pm_runtime_barrier() error code checks
PM: runtime: Make pm_runtime_barrier() return void
PM: runtime: Stop checking pm_runtime_barrier() return code
Pull f2fs updates from Jaegeuk Kim:
"This series focuses on minor clean-ups and performance optimizations
across sysfs, documentation, debugfs, tracepoints, slab allocation,
and GC. Furthermore, it resolves several corner-case bugs caught by
xfstests, as well as issues related to 16KB page support and
f2fs_enable_checkpoint.
Enhancement:
- wrap ASCII tables in literal blocks to fix LaTeX build
- optimize trace_f2fs_write_checkpoint with enums
- support to show curseg.next_blkoff in debugfs
- add a sysfs entry to show max open zones
- add fadvise tracepoint
- use global inline_xattr_slab instead of per-sb slab cache
- set default valid_thresh_ratio to 80 for zoned devices
- maintain one time GC mode is enabled during whole zoned GC cycle
Bug fix:
- ensure node page reads complete before f2fs_put_super() finishes
- do not account invalid blocks in get_left_section_blocks()
- revert summary entry count from 2048 to 512 in 16kb block support
- detect recoverable inode during dryrun of find_fsync_dnodes()
- fix age extent cache insertion skip on counter overflow
- add sanity checks before unlinking and loading inodes
- ensure minimum trim granularity accounts for all devices
- block cache/dio write during f2fs_enable_checkpoint()
- propagate error from f2fs_enable_checkpoint()
- invalidate dentry cache on failed whiteout creation
- avoid updating compression context during writeback
- avoid updating zero-sized extent in extent cache
- avoid potential deadlock"
* tag 'f2fs-for-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (39 commits)
f2fs: ignore discard return value
f2fs: optimize trace_f2fs_write_checkpoint with enums
f2fs: fix to not account invalid blocks in get_left_section_blocks()
f2fs: support to show curseg.next_blkoff in debugfs
docs: f2fs: wrap ASCII tables in literal blocks to fix LaTeX build
f2fs: expand scalability of f2fs mount option
f2fs: change default schedule timeout value
f2fs: introduce f2fs_schedule_timeout()
f2fs: use memalloc_retry_wait() as much as possible
f2fs: add a sysfs entry to show max open zones
f2fs: wrap all unusable_blocks_per_sec code in CONFIG_BLK_DEV_ZONED
f2fs: simplify list initialization in f2fs_recover_fsync_data()
f2fs: revert summary entry count from 2048 to 512 in 16kb block support
f2fs: fix to detect recoverable inode during dryrun of find_fsync_dnodes()
f2fs: fix return value of f2fs_recover_fsync_data()
f2fs: add fadvise tracepoint
f2fs: fix age extent cache insertion skip on counter overflow
f2fs: Add sanity checks before unlinking and loading inodes
f2fs: Rename f2fs_unlink exit label
f2fs: ensure minimum trim granularity accounts for all devices
...
Pull pin control updates from Linus Walleij:
"The technical details below. For me the CIX Semi and Axis
Communications ARTPEC-9 SoCs were the most interesting new drivers in
this merge window.
Core changes:
- Handle per-direction skew control in the generic pin config
- Drop the pointless subsystem boilerplate banner message during
boot. Less noise in the console. It's available as debug message if
someone really want it
New drivers:
- Samsung Exynos 8890 SoC support
- Samsung Exynos derived Axis Communications ARTPEC-9 SoC support.
These guys literally live next door to me, ARTPEC spells out "Axis
Real-Time Picture Encoding Chip" and is tailored for camera image
streams and is something they have evolved for a quarter of a
century
- Mediatek MT6878 SoC support
- Qualcomm Glymur PMIC support (mostly just compatible strings)
- Qualcomm Kaanapali SoC TLMM support
- Microchip pic64gx "gpio2" SoC support
- Microchip Polarfire "iomux0" SoC support
- CIX Semiconductors SKY1 SoC support
- Rockchip RK3506 SoC support
- Airhoa AN7583 chip support
Improvements:
- Improvements for ST Microelectronics STM32 handling of skew
settings so input and output can have different skew settings
- A whole bunch of device tree binding cleanups: Marvell Armada and
Berlin, Actions Semiconductor S700 and S900, Broadcom Northstar 2
(NS2), Bitmain BM1880 and Spreadtrum SC9860 are moved over to
schema"
* tag 'pinctrl-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (107 commits)
pinctrl: add CONFIG_OF dependencies for microchip drivers
pinctrl: starfive: use dynamic GPIO base allocation
pinctrl: single: Fix incorrect type for error return variable
MAINTAINERS: Change Linus Walleij mail address
pinctrl: cix: Fix obscure dependency
dt-bindings: pinctrl: cix,sky1-pinctrl: Drop duplicate newline
dt-bindings: pinctrl: aspeed,ast2600-pinctrl: Add PCIe RC PERST# group
pinctrl: airoha: Fix AIROHA_PINCTRL_CONFS_DRIVE_E2 in an7583_pinctrl_match_data
pinctrl: airoha: fix pinctrl function mismatch issue
pinctrl: cherryview: Convert to use intel_gpio_add_pin_ranges()
pinctrl: intel: Export intel_gpio_add_pin_ranges()
pinctrl: renesas: rzg2l: Refactor OEN register PWPR handling
pinctrl: airoha: convert comma to semicolon
pinctrl: elkhartlake: Switch to INTEL_GPP() macro
pinctrl: cherryview: Switch to INTEL_GPP() macro
pinctrl: emmitsburg: Switch to INTEL_GPP() macro
pinctrl: denverton: Switch to INTEL_GPP() macro
pinctrl: cedarfork: Switch to INTEL_GPP() macro
pinctrl: airoha: add support for Airoha AN7583 PINs
dt-bindings: pinctrl: airoha: Document AN7583 Pin Controller
...
Pull dmaengine updates from Vinod Koul:
- Renesas driver conversion to RUNTIME_PM_OPS() etc
- Dropping module alias on bunch of drivers
- GPI Block event interrupt support in Qualcomm driver and updates to
I2C driver as well
* tag 'dmaengine-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits)
dt-bindings: dma: xilinx: Simplify dma-coherent property
dmaengine: fsl-edma: configure tcd attr with separate src and dst settings
dmaengine: st_fdma: drop unused module alias
dmaengine: bcm2835: enable compile testing
dmaengine: tegra210-adma: drop unused module alias
dmaengine: sprd: drop unused module alias
dmaengine: mmp_tdma: drop unnecessary OF node check in remove
dmaengine: mmp_tdma: drop unused module alias
dmaengine: k3dma: drop unused module alias
dmaengine: fsl-qdma: drop unused module alias
dmaengine: fsl-edma: drop unused module alias
dmaengine: dw: drop unused module alias
dmaengine: bcm2835: drop unused module alias
dmaengine: at_hdmac: add COMPILE_TEST support
dmaengine: at_hdmac: fix formats under 64-bit
i2c: i2c-qcom-geni: Add Block event interrupt support
dmaengine: qcom: gpi: Add GPI Block event interrupt support
dmaengine: idxd: drain ATS translations when disabling WQ
dmaengine: sh: Kconfig: Drop ARCH_R7S72100/ARCH_RZG2L dependency
dmaengine: rcar-dmac: Convert to NOIRQ_SYSTEM_SLEEP/RUNTIME_PM_OPS()
...
Pull phy updates from Vinod Koul:
"Core:
- Drop Kishon as maintainer, thanks to him for helping, move to
credits and add Neil to help with reviews.
- Add new phy_notify_stat to notify phy from controllers during the
runtime transitions and usage in samsung phy
New hardware support:
- Renesas RZ/G3E USB3.0 driver
- NXP Support TJA1048/TJA1051 CAN phy
- Rockchip support for rk3506 dsi dphy
- Qualcomm Glymur QMP PCIe PHY support
Updates:
- PM support for rcar-gen3-usb2 driver
- Samsung HDMI/eDP Transmitter Combo PHY updates
- Freescale imx8mq support for alternate reference clock"
* tag 'phy-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (40 commits)
MAINTAINERS: phy: Add Neil Armstrong as reviewers for phy subsystem
MAINTAINERS: phy: Move Kishon Vijay Abraham I to credits
phy: fsl-imx8mq-usb: support alternate reference clock
dt-bindings: phy: imx8mq-usb: add alternate reference clock
phy: rockchip: samsung-hdptx: Prevent Inter-Pair Skew from exceeding the limits
phy: rockchip: samsung-hdptx: Reduce ROPLL loop bandwidth
phy: rockchip: samsung-hdptx: Fix reported clock rate in high bpc mode
phy: ti: gmii-sel: Add a sanity check on the phy_id
phy: qcom: qmp-pcie: Add support for Glymur PCIe Gen5x4 PHY
phy: qcom-qmp: pcs: Add v8.50 register offsets
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Document the Glymur QMP PCIe PHY
dt-bindings: phy: qcom,sc8280xp-qmp-pcie-phy: Restrict resets per each device
phy: freescale: Initialize priv->lock
phy: renesas: Remove unneeded semicolons
phy: qcom: m31-eusb2: Update init sequence to set PHY_ENABLE
phy: qcom: qmp-combo: get the USB3 & DisplayPort lanes mapping from DT
dt-bindings: phy: qcom,sc8280xp-qmp-usb43dp-phy: Document lanes mapping when not using in USB-C complex
phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3562
phy: rockchip: naneng-combphy: Fix PCIe L1ss support RK3528
phy: renesas: rcar-gen3-usb2: Add suspend/resume support
...
The Renesas RZ/V2H RTC IP is based on the same RTCA3 IP as RZ/G3S
(r9a08g045), with the following differences:
- It lacks the time capture functionality
- The maximum supported periodic interrupt frequency is 128Hz instead
of 256Hz
- It requires two reset lines instead of one
Add new compatible string "renesas,r9a09g057-rtca3" for RZ/V2H and update
the binding accordingly:
- Allow "resets" to contain one or two entries depending on the SoC.
- Add "reset-names" property, but make it required only for RZ/V2H.
Signed-off-by: Ovidiu Panait <ovidiu.panait.rb@renesas.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20251107210706.45044-2-ovidiu.panait.rb@renesas.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Pull hyperv updates from Wei Liu:
- Enhancements to Linux as the root partition for Microsoft Hypervisor:
- Support a new mode called L1VH, which allows Linux to drive the
hypervisor running the Azure Host directly
- Support for MSHV crash dump collection
- Allow Linux's memory management subsystem to better manage guest
memory regions
- Fix issues that prevented a clean shutdown of the whole system on
bare metal and nested configurations
- ARM64 support for the MSHV driver
- Various other bug fixes and cleanups
- Add support for Confidential VMBus for Linux guest on Hyper-V
- Secure AVIC support for Linux guests on Hyper-V
- Add the mshv_vtl driver to allow Linux to run as the secure kernel in
a higher virtual trust level for Hyper-V
* tag 'hyperv-next-signed-20251207' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: (58 commits)
mshv: Cleanly shutdown root partition with MSHV
mshv: Use reboot notifier to configure sleep state
mshv: Add definitions for MSHV sleep state configuration
mshv: Add support for movable memory regions
mshv: Add refcount and locking to mem regions
mshv: Fix huge page handling in memory region traversal
mshv: Move region management to mshv_regions.c
mshv: Centralize guest memory region destruction
mshv: Refactor and rename memory region handling functions
mshv: adjust interrupt control structure for ARM64
Drivers: hv: use kmalloc_array() instead of kmalloc()
mshv: Add ioctl for self targeted passthrough hvcalls
Drivers: hv: Introduce mshv_vtl driver
Drivers: hv: Export some symbols for mshv_vtl
static_call: allow using STATIC_CALL_TRAMP_STR() from assembly
mshv: Extend create partition ioctl to support cpu features
mshv: Allow mappings that overlap in uaddr
mshv: Fix create memory region overlap check
mshv: add WQ_PERCPU to alloc_workqueue users
Drivers: hv: Use kmalloc_array() instead of kmalloc()
...
Pull i3c updates from Alexandre Belloni:
"HDR support has finally been added. mipi-i3c-hci has been reworked and
Intel Nova Lake-S support has been added.
Subsystem:
- Add HDR transfer support
Drivers:
- dw: fix bus hang on Agilex5
- mipi-i3c-hci: Intel Nova Lake-S support, IOMMU support
- svc: HDR support"
* tag 'i3c/for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (28 commits)
regmap: i3c: switch to use i3c_xfer from i3c_priv_xfer
net: mctp i3c: switch to use i3c_xfer from i3c_priv_xfer
hwmon: (lm75): switch to use i3c_xfer from i3c_priv_xfer
i3c: document i3c_xfers
i3c: fix I3C_SDR bit number
i3c: master: svc: Add basic HDR mode support
i3c: master: svc: Replace bool rnw with union for HDR support
i3c: Switch to use new i3c_xfer from i3c_priv_xfer
i3c: Add HDR API support
i3c: master: add WQ_PERCPU to alloc_workqueue users
i3c: master: Remove i3c_device_free_ibi from i3c_device_remove
i3c: mipi-i3c-hci-pci: Set d3cold_delay to 0 for Intel controllers
i3c: mipi-i3c-hci-pci: Add LTR support for Intel controllers
i3c: mipi-i3c-hci-pci: Add exit callback
i3c: mipi-i3c-hci-pci: Change callback parameter
i3c: mipi-i3c-hci-pci: Allocate a structure for mipi_i3c_hci_pci device information
i3c: mipi-i3c-hci-pci: Factor out intel_reset()
i3c: mipi-i3c-hci-pci: Factor out private registers ioremapping
i3c: mipi-i3c-hci-pci: Constify driver data
i3c: mipi-i3c-hci-pci: Use readl_poll_timeout()
...
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
Pull memblock update from Mike Rapoport:
"Introduce a 'check_pages' boot parameter to decouple simple checks for
page state on allocation and free from CONFIG_DEBUG_VM.
This allows enabling page checking without building kernel with
CONFIG_DEBUG_VM or forcing init_on_{alloc, free} or other heavier
mechanisms"
* tag 'memblock-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
mm/mm_init: Introduce a boot parameter for check_pages
Add CIX IPBLOQ HDA controller support, which is integrated into
CIX SKY1 audio subsystem. HDA controller supports 64bit, but the
audio subsystem can only 32bit transaction. Use jack polling mode
as there is a hardware issue, lead to interrupt strom if the RIRB
interrupt enabled. Host and hdac has different view of memory, so
need do dma address translation.
Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20251205154621.3019640-2-joakim.zhang@cixtech.com
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.19-rc1. Nothing major here, just lots of tiny updates for most of
the common USB drivers. Included in here are:
- more xhci driver updates and fixes
- Thunderbolt driver cleanups
- usb serial driver updates
- typec driver updates
- USB tracepoint additions
- dwc3 driver updates, including support for Apple hardware
- lots of other smaller driver updates and cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (161 commits)
usb: gadget: tegra-xudc: Always reinitialize data toggle when clear halt
USB: serial: option: move Telit 0x10c7 composition in the right place
USB: serial: option: add Telit Cinterion FE910C04 new compositions
usb: typec: ucsi: fix use-after-free caused by uec->work
usb: typec: ucsi: fix probe failure in gaokun_ucsi_probe()
usb: dwc3: core: Remove redundant comment in core init
usb: phy: Initialize struct usb_phy list_head
USB: serial: option: add Foxconn T99W760
usb: usb-storage: No additional quirks need to be added to the EL-R12 optical drive.
usb: typec: hd3ss3220: Enable VBUS based on ID pin state
dt-bindings: usb: ti,hd3ss3220: Add support for VBUS based on ID state
usb: typec: anx7411: add WQ_PERCPU to alloc_workqueue users
USB: add WQ_PERCPU to alloc_workqueue users
dt-bindings: usb: dwc3-xilinx: Describe the reset constraint for the versal platform
drivers/usb/storage: use min() instead of min_t()
usb: raw-gadget: cap raw_io transfer length to KMALLOC_MAX_SIZE
usb: ohci-da8xx: remove unused platform data
usb: gadget: functionfs: use dma_buf_unmap_attachment_unlocked() helper
usb: uas: reduce time under spinlock
usb: dwc3: eic7700: Add EIC7700 USB driver
...
Pull tty/serial updates from Greg KH:
"Here is the big set of tty/serial driver changes for 6.19-rc1. Nothing
major at all, just small constant churn to make the tty layer
"cleaner" as well as serial driver updates and even a new test added!
Included in here are:
- More tty/serial cleanups from Jiri
- tty tiocsti test added to hopefully ensure we don't regress in this
area again
- sc16is7xx driver updates
- imx serial driver updates
- 8250 driver updates
- new hardware device ids added
- other minor serial/tty driver cleanups and tweaks
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (60 commits)
serial: sh-sci: Fix deadlock during RSCI FIFO overrun error
dt-bindings: serial: rsci: Drop "uart-has-rtscts: false"
LoongArch: dts: Add uart new compatible string
serial: 8250: Add Loongson uart driver support
dt-bindings: serial: 8250: Add Loongson uart compatible
serial: 8250: add driver for KEBA UART
serial: Keep rs485 settings for devices without firmware node
serial: qcom-geni: Enable Serial on SA8255p Qualcomm platforms
serial: qcom-geni: Enable PM runtime for serial driver
serial: sprd: Return -EPROBE_DEFER when uart clock is not ready
tty: serial: samsung: Declare earlycon for Exynos850
serial: icom: Convert PCIBIOS_* return codes to errnos
serial: 8250-of: Fix style issues in 8250_of.c
serial: add support of CPCI cards
serial: mux: Fix kernel doc for mux_poll()
tty: replace use of system_unbound_wq with system_dfl_wq
serial: 8250_platform: simplify IRQF_SHARED handling
serial: 8250: make share_irqs local to 8250_platform
serial: 8250: move skip_txen_test to core
serial: drop SERIAL_8250_DEPRECATED_OPTIONS
...
