drivers/net/ethernet/mellanox/mlx5/core/en_tc.c
commit 077cdda764 ("net/mlx5e: TC, Fix memory leak with rules with internal port")
commit 31108d142f ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
commit 4390c6edc0 ("net/mlx5: Fix some error handling paths in 'mlx5e_tc_add_fdb_flow()'")
https://lore.kernel.org/all/20211229065352.30178-1-saeed@kernel.org/
net/smc/smc_wr.c
commit 49dc9013e3 ("net/smc: Use the bitmap API when applicable")
commit 349d43127d ("net/smc: fix kernel panic caused by race of smc_sock")
bitmap_zero()/memset() is removed by the fix
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull EFI fix from Ard Biesheuvel:
"Another EFI fix for v5.16:
- Prevent missing prototype warning from breaking the build under
CONFIG_WERROR=y"
* tag 'efi-urgent-for-v5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Move efifb_setup_from_dmi() prototype from arch headers
Pull ARM fixes from Russell King:
- fix nommu after getting rid of mini-stack for ARMv7
- fix Thumb2 bug in iWMMXt exception handling
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9169/1: entry: fix Thumb2 bug in iWMMXt exception handling
ARM: 9160/1: NOMMU: Reload __secondary_data after PROCINFO_INITFUNC
Pull ARM SoC fixes from Arnd Bergmann:
"This is my last set of fixes for 5.16, including
- multiple code fixes for the op-tee firmware driver
- Two patches for allwinner SoCs, one fixing the phy mode on a board,
the other one fixing a driver bug in the "RSB" bus driver. This was
originally targeted for 5.17, but seemed worth moving to 5.16
- Two small fixes for devicetree files on i.MX platforms, resolving
problems with ethernet and i2c"
* tag 'arm-fixes-5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
optee: Suppress false positive kmemleak report in optee_handle_rpc()
tee: optee: Fix incorrect page free bug
arm64: dts: lx2160a: fix scl-gpios property name
tee: handle lookup of shm with reference count 0
ARM: dts: imx6qdl-wandboard: Fix Ethernet support
bus: sunxi-rsb: Fix shutdown
arm64: dts: allwinner: orangepi-zero-plus: fix PHY mode
The Thumb2 version of the FP exception handling entry code treats the
register holding the CP number (R8) differently, resulting in the iWMMXT
CP number check to be incorrect.
Fix this by unifying the ARM and Thumb2 code paths, and switch the
order of the additions of the TI_USED_CP offset and the shifted CP
index.
Cc: <stable@vger.kernel.org>
Fixes: b86040a59f ("Thumb-2: Implementation of the unified start-up and exceptions code")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
__secondary_data used to reside in r7 around call to
PROCINFO_INITFUNC. After commit 95731b8ee6 ("ARM: 9059/1: cache-v7:
get rid of mini-stack") r7 is used as a scratch register, so we have
to reload __secondary_data before we setup the stack pointer.
Fixes: 95731b8ee6 ("ARM: 9059/1: cache-v7: get rid of mini-stack")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Currently, the imx6q-wandboard Ethernet does not transmit any
data.
This issue has been exposed by commit f5d9aa79df ("ARM: imx6q:
remove clk-out fixup for the Atheros AR8031 and AR8035 PHYs").
Fix it by describing the qca,clk-out-frequency property as suggested
by the commit above.
Fixes: 77591e4245 ("ARM: dts: imx6qdl-wandboard: add ethernet PHY description")
Signed-off-by: Martin Haaß <vvvrrooomm@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Prevent panic with FORTIFY_SOURCE in smp bringup.
* tag 'v5.16-rockchip-socfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: rockchip: Use memcpy_toio instead of memcpy on smp bring-up
Link: https://lore.kernel.org/r/1827929.9bfCS3lLB7@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 5.16, round 2:
- One fix on imx8m-blk-ctrl driver to get i.MX8MM MIPI reset work
properly
- Fix CSI_DATA07__ESAI_TX0 pad name in i.MX7ULL pin function header
- Remove interconnect property from i.MX8MQ LCDIF device to fix the
regression that LCDIF driver stops probe, because interconnect
provider driver (imx-bus) hasn't been fully working.
- Fix soc-imx driver to register SoC device only on i.MX platform.
* tag 'imx-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: Register SoC device only on i.MX boards
soc: imx: imx8m-blk-ctrl: Fix imx8mm mipi reset
ARM: dts: imx6ull-pinfunc: Fix CSI_DATA07__ESAI_TX0 pad name
arm64: dts: imx8mq: remove interconnect property from lcdif
Link: https://lore.kernel.org/r/20211211015625.GK4216@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 8633ef82f1 ("drivers/firmware: consolidate EFI framebuffer setup
for all arches") made the Generic System Framebuffers (sysfb) driver able
to be built on non-x86 architectures.
But it left the efifb_setup_from_dmi() function prototype declaration in
the architecture specific headers. This could lead to the following
compiler warning as reported by the kernel test robot:
drivers/firmware/efi/sysfb_efi.c:70:6: warning: no previous prototype for function 'efifb_setup_from_dmi' [-Wmissing-prototypes]
void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
^
drivers/firmware/efi/sysfb_efi.c:70:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
void efifb_setup_from_dmi(struct screen_info *si, const char *opt)
Fixes: 8633ef82f1 ("drivers/firmware: consolidate EFI framebuffer setup for all arches")
Reported-by: kernel test robot <lkp@intel.com>
Cc: <stable@vger.kernel.org> # 5.15.x
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20211126001333.555514-1-javierm@redhat.com
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
i.MX fixes for 5.16:
- A series from Vladimir Oltean to update SJA1105 switch RGMII delay for
a few boards, so that kernel doesn't warn on the legacy bindings.
- Remove redundant interrupt declaration for gpio-keys on board
ls1088a-ten64, as this causes an IRQ reclaiming error on kernel v5.15
and later.
* tag 'imx-fixes-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ten64: remove redundant interrupt declaration for gpio-keys
arm64: dts: lx2160abluebox3: update RGMII delays for sja1105 switch
ARM: dts: ls1021a-tsn: update RGMII delays for sja1105 switch
ARM: dts: imx6qp-prtwd3: update RGMII delays for sja1105 switch
Link: https://lore.kernel.org/r/20211126100716.GF4216@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The first two interconnects defined for IPA on the SDX55 SoC are
really two parts of what should be represented as a single path
between IPA and system memory.
Fix this by combining the "memory-a" and "memory-b" interconnects
into a single "memory" interconnect.
Reported-by: David Heidelberg <david@ixit.cz>
Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrii Nakryiko says:
====================
bpf-next 2021-12-10 v2
We've added 115 non-merge commits during the last 26 day(s) which contain
a total of 182 files changed, 5747 insertions(+), 2564 deletions(-).
The main changes are:
1) Various samples fixes, from Alexander Lobakin.
2) BPF CO-RE support in kernel and light skeleton, from Alexei Starovoitov.
3) A batch of new unified APIs for libbpf, logging improvements, version
querying, etc. Also a batch of old deprecations for old APIs and various
bug fixes, in preparation for libbpf 1.0, from Andrii Nakryiko.
4) BPF documentation reorganization and improvements, from Christoph Hellwig
and Dave Tucker.
5) Support for declarative initialization of BPF_MAP_TYPE_PROG_ARRAY in
libbpf, from Hengqi Chen.
6) Verifier log fixes, from Hou Tao.
7) Runtime-bounded loops support with bpf_loop() helper, from Joanne Koong.
8) Extend branch record capturing to all platforms that support it,
from Kajol Jain.
9) Light skeleton codegen improvements, from Kumar Kartikeya Dwivedi.
10) bpftool doc-generating script improvements, from Quentin Monnet.
11) Two libbpf v0.6 bug fixes, from Shuyi Cheng and Vincent Minet.
12) Deprecation warning fix for perf/bpf_counter, from Song Liu.
13) MAX_TAIL_CALL_CNT unification and MIPS build fix for libbpf,
from Tiezhu Yang.
14) BTF_KING_TYPE_TAG follow-up fixes, from Yonghong Song.
15) Selftests fixes and improvements, from Ilya Leoshkevich, Jean-Philippe
Brucker, Jiri Olsa, Maxim Mikityanskiy, Tirthendu Sarkar, Yucong Sun,
and others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (115 commits)
libbpf: Add "bool skipped" to struct bpf_map
libbpf: Fix typo in btf__dedup@LIBBPF_0.0.2 definition
bpftool: Switch bpf_object__load_xattr() to bpf_object__load()
selftests/bpf: Remove the only use of deprecated bpf_object__load_xattr()
selftests/bpf: Add test for libbpf's custom log_buf behavior
selftests/bpf: Replace all uses of bpf_load_btf() with bpf_btf_load()
libbpf: Deprecate bpf_object__load_xattr()
libbpf: Add per-program log buffer setter and getter
libbpf: Preserve kernel error code and remove kprobe prog type guessing
libbpf: Improve logging around BPF program loading
libbpf: Allow passing user log setting through bpf_object_open_opts
libbpf: Allow passing preallocated log_buf when loading BTF into kernel
libbpf: Add OPTS-based bpf_btf_load() API
libbpf: Fix bpf_prog_load() log_buf logic for log_level 0
samples/bpf: Remove unneeded variable
bpf: Remove redundant assignment to pointer t
selftests/bpf: Fix a compilation warning
perf/bpf_counter: Use bpf_map_create instead of bpf_create_map
samples: bpf: Fix 'unknown warning group' build warning on Clang
samples: bpf: Fix xdp_sample_user.o linking with Clang
...
====================
Link: https://lore.kernel.org/r/20211210234746.2100561-1-andrii@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
According to the i.MX6ULL Reference Manual, pad CSI_DATA07 may
have the ESAI_TX0 functionality, not ESAI_T0.
Also, NXP's i.MX Config Tools 10.0 generates dtsi with the
MX6ULL_PAD_CSI_DATA07__ESAI_TX0 naming, so fix it accordingly.
There are no devicetree users in mainline that use the old name,
so just remove the old entry.
Fixes: c201369d4a ("ARM: dts: imx6ull: add imx6ull support")
Reported-by: George Makarov <georgemakarov1@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The QSPI flash node needs to have the required "jedec,spi-nor" in the
compatible string.
Fixes: 1df99da895 ("ARM: dts: socfpga: Enable QSPI in Arria10 devkit")
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Pull ARM SoC fixes from Arnd Bergmann:
"There are only a few devicetree fixes this time:
- one outdated devicetree property that slipped into the newly added
ExynosAutov9 support
- three changes to Broadcom SoCs that had incorrect number values for
interrupts or irqchips.
In the MAINTAINERS file, Nishanth Menon gets listed for TI K3 SoCs,
while Taichi Sugaya and Takao Orito take ownership of the Socionext
Milbeaut platform.
All other changes are for SoC specific drivers, fixing:
- A missing NULL pointer check in the mediatek memory driver
- An integer overflow issue in the Arm smccc firwmare interface
- A false-positive fortify-source check
- Error handling fixes for optee and smci
- Incorrect message format in one SCMI call"
* tag 'arm-fixes-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
memory: mtk-smi: Fix a null dereference for the ostd
arm64: dts: exynos: drop samsung,ufs-shareability-reg-offset in ExynosAutov9
MAINTAINERS: Update maintainer entry for keystone platforms
MAINTAINERS: Add entry to MAINTAINERS for Milbeaut
firmware: smccc: Fix check for ARCH_SOC_ID not implemented
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
firmware: arm_scmi: Fix type error assignment in voltage protocol
firmware: arm_scmi: Fix type error in sensor protocol
firmware: arm_scmi: pm: Propagate return value to caller
firmware: arm_scmi: Fix base agent discover response
optee: fix kfree NULL pointer
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
firmware: arm_scmi: Fix null de-reference on error path
Pull folio fixes from Matthew Wilcox:
"In the course of preparing the folio changes for iomap for next merge
window, we discovered some problems that would be nice to address now:
- Renaming multi-page folios to large folios.
mapping_multi_page_folio_support() is just a little too long, so we
settled on mapping_large_folio_support(). That meant renaming, eg
folio_test_multi() to folio_test_large().
Rename AS_THP_SUPPORT to match
- I hadn't included folio wrappers for zero_user_segments(), etc.
Also, multi-page^W^W large folio support is now independent of
CONFIG_TRANSPARENT_HUGEPAGE, so machines with HIGHMEM always need
to fall back to the out-of-line zero_user_segments().
Remove FS_THP_SUPPORT to match
- The build bots finally got round to telling me that I missed a
couple of architectures when adding flush_dcache_folio(). Christoph
suggested that we just add linux/cacheflush.h and not rely on
asm-generic/cacheflush.h"
* tag 'folio-5.16b' of git://git.infradead.org/users/willy/pagecache:
mm: Add functions to zero portions of a folio
fs: Rename AS_THP_SUPPORT and mapping_thp_support
fs: Remove FS_THP_SUPPORT
mm: Remove folio_test_single
mm: Rename folio_test_multi to folio_test_large
Add linux/cacheflush.h
SoCFPGA fix for v5.16
- Fix crash when CONFIG_FORTIRY_SOURCE is enabled
* tag 'socfpga_fix_for_v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
ARM: socfpga: Fix crash with CONFIG_FORTIRY_SOURCE
Link: https://lore.kernel.org/r/20211119153224.2761257-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.16, please pull the following:
- Florian fixes the BCM5310x DTS include file to have the appropriate
I2C controller interrupt line, and allows the BCMA GPIO controller to
be used as an interrupt controller. Finally, the BCM2711 (Raspberry Pi
4) PCIe Device Tree node interrupts are fixed to list the correct
interrupt output as well as the INTB/C/D lines.
* tag 'arm-soc/for-5.16/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm2711: Fix PCIe interrupts
ARM: dts: BCM5301X: Add interrupt properties to GPIO node
ARM: dts: BCM5301X: Fix I2C controller interrupt
Link: https://lore.kernel.org/r/20211116201429.2692786-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to not apply delays
in any direction (mostly because the SJA1105T can't do that, so this
board uses PCB traces). To preserve that but also silence the driver,
use explicit delays of 0 ns. The delay information from the phy-mode is
ignored by new kernels (it's still RGMII as long as it's "rgmii*"
something), and the explicit {rx,tx}-internal-delay-ps properties are
ignored by old kernels, so the change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In the new behavior, the sja1105 driver expects there to be explicit
RGMII delays present on the fixed-link ports, otherwise it will complain
that it falls back to legacy behavior, which is to apply RGMII delays
incorrectly derived from the phy-mode string.
In this case, the legacy behavior of the driver is to apply both RX and
TX delays. To preserve that, add explicit 2 nanosecond delays, which are
identical with what the driver used to add (a 90 degree phase shift).
The delays from the phy-mode are ignored by new kernels (it's still
RGMII as long as it's "rgmii*" something), and the explicit
{rx,tx}-internal-delay-ps properties are ignored by old kernels, so the
change works both ways.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The kmap_local conversion broke the ARM architecture, because the new
code assumes that all PTEs used for creating kmaps form a linear array
in memory, and uses array indexing to look up the kmap PTE belonging to
a certain kmap index.
On ARM, this cannot work, not only because the PTE pages may be
non-adjacent in memory, but also because ARM/!LPAE interleaves hardware
entries and extended entries (carrying software-only bits) in a way that
is not compatible with array indexing.
Fortunately, this only seems to affect configurations with more than 8
CPUs, due to the way the per-CPU kmap slots are organized in memory.
Work around this by permitting an architecture to set a Kconfig symbol
that signifies that the kmap PTEs do not form a lineary array in memory,
and so the only way to locate the appropriate one is to walk the page
tables.
Link: https://lore.kernel.org/linux-arm-kernel/20211026131249.3731275-1-ardb@kernel.org/
Link: https://lkml.kernel.org/r/20211116094737.7391-1-ardb@kernel.org
Fixes: 2a15ba82fa ("ARM: highmem: Switch to generic kmap atomic")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reported-by: Quanyang Wang <quanyang.wang@windriver.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When CONFIG_FORTIFY_SOURCE is set, memcpy() checks the potential
buffer overflow and panics. The code in sofcpga bootstrapping
contains the memcpy() calls are mistakenly translated as the shorter
size, hence it triggers a panic as if it were overflowing.
This patch changes the secondary_trampoline and *_end definitions
to arrays for avoiding the false-positive crash above.
Fixes: 9c4566a117 ("ARM: socfpga: Enable SMP for socfpga")
Suggested-by: Kees Cook <keescook@chromium.org>
Buglink: https://bugzilla.suse.com/show_bug.cgi?id=1192473
Link: https://lore.kernel.org/r/20211117193244.31162-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Many architectures do not include asm-generic/cacheflush.h, so turn
the includes on their head and add linux/cacheflush.h which includes
asm/cacheflush.h.
Move the flush_dcache_folio() declaration from asm-generic/cacheflush.h
to linux/cacheflush.h and change linux/highmem.h to include
linux/cacheflush.h instead of asm/cacheflush.h so that all necessary
places will see flush_dcache_folio().
More functions should have their default implementations moved in the
future, but those are for follow-on patches. This fixes csky, sparc and
sparc64 which were missed in the commit which added flush_dcache_folio().
Fixes: 08b0b0059b ("mm: Add flush_dcache_folio()")
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
In the current code, the actual max tail call count is 33 which is greater
than MAX_TAIL_CALL_CNT (defined as 32). The actual limit is not consistent
with the meaning of MAX_TAIL_CALL_CNT and thus confusing at first glance.
We can see the historical evolution from commit 04fd61ab36 ("bpf: allow
bpf programs to tail-call other bpf programs") and commit f9dabe016b
("bpf: Undo off-by-one in interpreter tail call count limit"). In order
to avoid changing existing behavior, the actual limit is 33 now, this is
reasonable.
After commit 874be05f52 ("bpf, tests: Add tail call test suite"), we can
see there exists failed testcase.
On all archs when CONFIG_BPF_JIT_ALWAYS_ON is not set:
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:0 ret 34 != 33 FAIL
On some archs:
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf
# dmesg | grep -w FAIL
Tail call error path, max count reached jited:1 ret 34 != 33 FAIL
Although the above failed testcase has been fixed in commit 18935a72eb
("bpf/tests: Fix error in tail call limit tests"), it would still be good
to change the value of MAX_TAIL_CALL_CNT from 32 to 33 to make the code
more readable.
The 32-bit x86 JIT was using a limit of 32, just fix the wrong comments and
limit to 33 tail calls as the constant MAX_TAIL_CALL_CNT updated. For the
mips64 JIT, use "ori" instead of "addiu" as suggested by Johan Almbladh.
For the riscv JIT, use RV_REG_TCC directly to save one register move as
suggested by Björn Töpel. For the other implementations, no function changes,
it does not change the current limit 33, the new value of MAX_TAIL_CALL_CNT
can reflect the actual max tail call count, the related tail call testcases
in test_bpf module and selftests can work well for the interpreter and the
JIT.
Here are the test results on x86_64:
# uname -m
x86_64
# echo 0 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [0/8 JIT'ed]
# rmmod test_bpf
# echo 1 > /proc/sys/net/core/bpf_jit_enable
# modprobe test_bpf test_suite=test_tail_calls
# dmesg | tail -1
test_bpf: test_tail_calls: Summary: 8 PASSED, 0 FAILED, [8/8 JIT'ed]
# rmmod test_bpf
# ./test_progs -t tailcalls
#142 tailcalls:OK
Summary: 1/11 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Tested-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Björn Töpel <bjorn@kernel.org>
Acked-by: Johan Almbladh <johan.almbladh@anyfinetworks.com>
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Link: https://lore.kernel.org/bpf/1636075800-3264-1-git-send-email-yangtiezhu@loongson.cn
The PCIe host bridge has two interrupt lines, one that goes towards it
PCIE_INTR2 second level interrupt controller and one for its MSI second
level interrupt controller. The first interrupt line is not currently
managed by the driver, which is why it was not a functional problem.
The interrupt-map property was also only listing the PCI_INTA interrupts
when there are also the INTB, C and D.
Reported-by: Jim Quinlan <jim2101024@gmail.com>
Fixes: d5c8dc0d4c ("ARM: dts: bcm2711: Enable PCIe controller")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The GPIO controller is also an interrupt controller provider and is
currently missing the appropriate 'interrupt-controller' and
'#interrupt-cells' properties to denote that.
Fixes: fb026d3de3 ("ARM: BCM5301X: Add Broadcom's bus-axi to the DTS file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
The I2C interrupt controller line is off by 32 because the datasheet
describes interrupt inputs into the GIC which are for Shared Peripheral
Interrupts and are starting at offset 32. The ARM GIC binding expects
the SPI interrupts to be numbered from 0 relative to the SPI base.
Fixes: bb097e3e00 ("ARM: dts: BCM5301X: Add I2C support to the DT")
Tested-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Pull ARM fixes from Russell King:
- Fix early_iounmap
- Drop cc-option fallbacks for architecture selection
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9156/1: drop cc-option fallbacks for architecture selection
ARM: 9155/1: fix early early_iounmap()
Naresh and Antonio ran into a build failure with latest Debian
armhf compilers, with lots of output like
tmp/ccY3nOAs.s:2215: Error: selected processor does not support `cpsid i' in ARM mode
As it turns out, $(cc-option) fails early here when the FPU is not
selected before CPU architecture is selected, as the compiler
option check runs before enabling -msoft-float, which causes
a problem when testing a target architecture level without an FPU:
cc1: error: '-mfloat-abi=hard': selected architecture lacks an FPU
Passing e.g. -march=armv6k+fp in place of -march=armv6k would avoid this
issue, but the fallback logic is already broken because all supported
compilers (gcc-5 and higher) are much more recent than these options,
and building with -march=armv5t as a fallback no longer works.
The best way forward that I see is to just remove all the checks, which
also has the nice side-effect of slightly improving the startup time for
'make'.
The -mtune=marvell-f option was apparently never supported by any mainline
compiler, and the custom Codesourcery gcc build that did support is
now too old to build kernels, so just use -mtune=xscale unconditionally
for those.
This should be safe to apply on all stable kernels, and will be required
in order to keep building them with gcc-11 and higher.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=996419
Reported-by: Antonio Terceiro <antonio.terceiro@linaro.org>
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Reported-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: Klaus Kudielka <klaus.kudielka@gmail.com>
Cc: Matthias Klose <doko@debian.org>
Cc: stable@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Currently __set_fixmap() bails out with a warning when called in early boot
from early_iounmap(). Fix it, and while at it, make the comment a bit easier
to understand.
Cc: <stable@vger.kernel.org>
Fixes: b089c31c51 ("ARM: 8667/3: Fix memory attribute inconsistencies when using fixmap")
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Pull arm64 fixes from Will Deacon:
- Fix double-evaluation of 'pte' macro argument when using 52-bit PAs
- Fix signedness of some MTE prctl PR_* constants
- Fix kmemleak memory usage by skipping early pgtable allocations
- Fix printing of CPU feature register strings
- Remove redundant -nostdlib linker flag for vDSO binaries
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: make __pte_to_phys/__phys_to_pte_val inline functions
arm64: Track no early_pgtable_alloc() for kmemleak
arm64: mte: change PR_MTE_TCF_NONE back into an unsigned long
arm64: vdso: remove -nostdlib compiler flag
arm64: arm64_ftr_reg->name may not be a human-readable string
Pull asm-generic cleanup from Arnd Bergmann:
"This is a single cleanup from Peter Collingbourne, removing some dead
code"
* tag 'asm-generic-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: remove unused function syscall_set_arguments()
Pull xen updates from Juergen Gross:
- a series to speed up the boot of Xen PV guests
- some cleanups in Xen related code
- replacement of license texts with the appropriate SPDX headers and
fixing of wrong SPDX headers in Xen header files
- a small series making paravirtualized interrupt masking much simpler
and at the same time removing complaints of objtool
- a fix for Xen ballooning hogging workqueues for too long
- enablement of the Xen pciback driver for Arm
- some further small fixes/enhancements
* tag 'for-linus-5.16b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits)
xen/balloon: fix unused-variable warning
xen/balloon: rename alloc/free_xenballooned_pages
xen/balloon: add late_initcall_sync() for initial ballooning done
x86/xen: remove 32-bit awareness from startup_xen
xen: remove highmem remnants
xen: allow pv-only hypercalls only with CONFIG_XEN_PV
x86/xen: remove 32-bit pv leftovers
xen-pciback: allow compiling on other archs than x86
x86/xen: switch initial pvops IRQ functions to dummy ones
x86/xen: remove xen_have_vcpu_info_placement flag
x86/pvh: add prototype for xen_pvh_init()
xen: Fix implicit type conversion
xen: fix wrong SPDX headers of Xen related headers
xen/pvcalls-back: Remove redundant 'flush_workqueue()' calls
x86/xen: Remove redundant irq_enter/exit() invocations
xen-pciback: Fix return in pm_ctrl_init()
xen/x86: restrict PV Dom0 identity mapping
xen/x86: there's no highmem anymore in PV mode
xen/x86: adjust handling of the L3 user vsyscall special page table
xen/x86: adjust xen_set_fixmap()
...
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
After switched page size from 64KB to 4KB on several arm64 servers here,
kmemleak starts to run out of early memory pool due to a huge number of
those early_pgtable_alloc() calls:
kmemleak_alloc_phys()
memblock_alloc_range_nid()
memblock_phys_alloc_range()
early_pgtable_alloc()
init_pmd()
alloc_init_pud()
__create_pgd_mapping()
__map_memblock()
paging_init()
setup_arch()
start_kernel()
Increased the default value of DEBUG_KMEMLEAK_MEM_POOL_SIZE by 4 times
won't be enough for a server with 200GB+ memory. There isn't much
interesting to check memory leaks for those early page tables and those
early memory mappings should not reference to other memory. Hence, no
kmemleak false positives, and we can safely skip tracking those early
allocations from kmemleak like we did in the commit fed84c7852
("mm/memblock.c: skip kmemleak for kasan_init()") without needing to
introduce complications to automatically scale the value depends on the
runtime memory size etc. After the patch, the default value of
DEBUG_KMEMLEAK_MEM_POOL_SIZE becomes sufficient again.
Signed-off-by: Qian Cai <quic_qiancai@quicinc.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Link: https://lore.kernel.org/r/20211105150509.7826-1-quic_qiancai@quicinc.com
Signed-off-by: Will Deacon <will@kernel.org>
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
5.16-rc1.
Nothing major in here, just lots of little cleanups and additions for
new hardware, all of which have been in linux-next for a while with no
reported problems.
Included in here are:
- tiny Thunderbolt driver updates
- USB typec driver updates
- USB serial driver updates
- USB gadget driver updates
- dwc2 and dwc3 controller driver updates
- tiny USB host driver updates
- minor USB driver fixes and updates
- USB dts updates for various platforms"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (123 commits)
usb: gadget: Mark USB_FSL_QE broken on 64-bit
usb: gadget: f_mass_storage: Disable eps during disconnect
usb: gadget: udc: core: Revise comments for USB ep enable/disable
USB: serial: keyspan: fix memleak on probe errors
USB: serial: cp210x: use usb_control_msg_recv() and usb_control_msg_send()
USB: serial: ch314: use usb_control_msg_recv()
USB: iowarrior: fix control-message timeouts
Documentation: USB: fix example bulk-message timeout
usb: dwc2: stm32mp15: set otg_rev
usb: dwc2: add otg_rev and otg_caps information for gadget driver
dt-bindings: usb: dwc2: adopt otg properties defined in usb-drd.yaml
dt-bindings: usb: dwc2: Add reference to usb-drd.yaml
usb: gadget: uvc: implement dwPresentationTime and scrSourceClock
usb: gadget: uvc: use on returned header len in video_encode_isoc_sg
usb:gadget: f_uac1: fixed sync playback
Docs: usb: remove :c:func: for usb_register and usb_deregister
Docs: usb: update struct usb_driver
usb: gadget: configfs: change config attributes file operation
usb: gadget: configfs: add cfg_to_gadget_info() helper
usb: dwc3: Align DWC3_EP_* flag macros
...
Pull clk updates from Stephen Boyd:
"The usual collection of clk driver updates and new driver additions.
In terms of lines it's mainly Qualcomm and Mediatek code, supporting
various SoCs and their multitude of clk controllers.
New Drivers:
- GCC and RPMcc support for Qualcomm QCM2290 SoCs
- GCC support for Qualcomm MSM8994/MSM8992 SoCs
- LPASSCC and CAMCC support for Qualcomm SC7280 SoCs
- Support for Mediatek MT8195 SoCs
- Initial clock driver for the Exynos850 SoC
- Add i.MX8ULP clock driver and related bindings
Updates:
- Clock power management for new SAMA7G5 SoC
- Updates to the master clock driver and sam9x60-pll to be able to
use cpufreq-dt driver and avoid overclocking of CPU and MCK0
domains while changing the frequency via DVFS
- Use ARRAY_SIZE in qcom clk drivers
- Remove some impractical fallback parent names in qcom clk drivers
- Make Mediatek clk drivers tristate
- Refactoring of the CPU clock code and conversion of Samsung
Exynos5433 CPU clock driver to the platform driver
- A few conversions to devm_platform_ioremap_resource()
- Updates of the Samsung Kconfig help text
- Update video path realted clocks for Amlogic meson8
- Add SPI Multi I/O Bus and SDHI clocks and resets on Renesas RZ/G2L
- Add SPI Multi I/O Bus (RPC) clocks on Renesas R-Car V3U
- Add MediaLB clocks on Renesas R-Car H3, M3-W/W+, and M3-N
- Remove unused helpers from i.MX specific clock header
- Rework all i.MX clk based helpers to use clk_hw based ones
- Rework i.MX gate/mux/divider wrappers
- Rework imx_clk_hw_composite and imx_clk_hw_pll14xx wrappers
- Update i.MX pllv4 and composite clocks to support i.MX8ULP
- Disable i.MX7ULP composite clock during initialization
- Add CLK_SET_RATE_NO_REPARENT flag to the i.MX7ULP composite
- Disable the i.MX pfd when set pfdv2 clock rate
- Add support for i.MX8ULP in pfdv2
- Add the pcc reset controller support on i.MX8ULP
- Fix the build break when clk-imx8ulp is built as module
- Move csi_sel mux to correct base register in i.MX6UL clock drivr
- Fix csi clk gate register in i.MX6UL clock driver
- Fix build bug making CLK_IMX8ULP select MXC_CLK
- Add TPU (PWM), and Z (Cortex-A76) clocks on Renesas R-Car V3U
- Add Ethernet clocks on Renesas RZ/G2L
- Move Rockchip to use module_platform_probe
- Enable usage of Coresight related clocks on Rockchip rk3399"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (170 commits)
clk: use clk_core_get_rate_recalc() in clk_rate_get()
clk: at91: sama7g5: set low limit for mck0 at 32KHz
clk: at91: sama7g5: remove prescaler part of master clock
clk: at91: clk-master: add notifier for divider
clk: at91: clk-sam9x60-pll: add notifier for div part of PLL
clk: at91: clk-master: fix prescaler logic
clk: at91: clk-master: mask mckr against layout->mask
clk: at91: clk-master: check if div or pres is zero
clk: at91: sam9x60-pll: use DIV_ROUND_CLOSEST_ULL
clk: at91: pmc: add sama7g5 to the list of available pmcs
clk: at91: clk-master: improve readability by using local variables
clk: at91: clk-master: add register definition for sama7g5's master clock
clk: at91: sama7g5: add securam's peripheral clock
clk: at91: pmc: execute suspend/resume only for backup mode
clk: at91: re-factor clocks suspend/resume
clk: ux500: Add driver for the reset portions of PRCC
dt-bindings: clock: u8500: Rewrite in YAML and extend
clk: composite: Use rate_ops.determine_rate when also a mux is available
clk: samsung: describe drivers in Kconfig
clk: samsung: exynos5433: update apollo and atlas clock probing
...
Pull ARM SoC driver updates from Arnd Bergmann:
"These are all the driver updates for SoC specific drivers. There are a
couple of subsystems with individual maintainers picking up their
patches here:
- The reset controller subsystem add support for a few new SoC
variants to existing drivers, along with other minor improvements
- The OP-TEE subsystem gets a driver for the ARM FF-A transport
- The memory controller subsystem has improvements for Tegra,
Mediatek, Renesas, Freescale and Broadcom specific drivers.
- The tegra cpuidle driver changes get merged through this tree this
time. There are only minor changes, but they depend on other tegra
driver updates here.
- The ep93xx platform finally moves to using the drivers/clk/
subsystem, moving the code out of arch/arm in the process. This
depends on a small sound driver change that is included here as
well.
- There are some minor updates for Qualcomm and Tegra specific
firmware drivers.
The other driver updates are mainly for drivers/soc, which contains a
mixture of vendor specific drivers that don't really fit elsewhere:
- Mediatek drivers gain more support for MT8192, with new support for
hw-mutex and mmsys routing, plus support for reset lines in the
mmsys driver.
- Qualcomm gains a new "sleep stats" driver, and support for the
"Generic Packet Router" in the APR driver.
- There is a new user interface for routing the UARTS on ASpeed BMCs,
something that apparently nobody else has needed so far.
- More drivers can now be built as loadable modules, in particular
for Broadcom and Samsung platforms.
- Lots of improvements to the TI sysc driver for better
suspend/resume support"
Finally, there are lots of minor cleanups and new device IDs for
amlogic, renesas, tegra, qualcomm, mediateka, samsung, imx,
layerscape, allwinner, broadcom, and omap"
* tag 'drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (179 commits)
optee: Fix spelling mistake "reclain" -> "reclaim"
Revert "firmware: qcom: scm: Add support for MC boot address API"
qcom: spm: allow compile-testing
firmware: arm_ffa: Remove unused 'compat_version' variable
soc: samsung: exynos-chipid: add exynosautov9 SoC support
firmware: qcom: scm: Don't break compile test on non-ARM platforms
soc: qcom: smp2p: Add of_node_put() before goto
soc: qcom: apr: Add of_node_put() before return
soc: qcom: qcom_stats: Fix client votes offset
soc: qcom: rpmhpd: fix sm8350_mxc's peer domain
dt-bindings: arm: cpus: Document qcom,msm8916-smp enable-method
ARM: qcom: Add qcom,msm8916-smp enable-method identical to MSM8226
firmware: qcom: scm: Add support for MC boot address API
soc: qcom: spm: Add 8916 SPM register data
dt-bindings: soc: qcom: spm: Document qcom,msm8916-saw2-v3.0-cpu
soc: qcom: socinfo: Add PM8150C and SMB2351 models
firmware: qcom_scm: Fix error retval in __qcom_scm_is_call_available()
soc: aspeed: Add UART routing support
soc: fsl: dpio: rename the enqueue descriptor variable
soc: fsl: dpio: use an explicit NULL instead of 0
...
Pull ARM SoC DT updates from Arnd Bergmann:
"This is a rather large update for the ARM devicetree files, after a
few quieter releases, with 775 total commits and 47 branches pulled
into this one.
There are 5 new SoC types plus some minor variations, and a total of
60 new machines, so I'm limiting the summary to the main noteworthy
items:
- Apple M1 gain support for PCI and pinctrl, getting a bit closer to
a usable system out of the box.
- Qualcomm gains support for Snapdragon 690 (aka SM6350) as well as
SM7225, 11 new smartphones, and three additional Chromebooks, and
improvements all over the place.
- Samsung gains support for ExynosAutov9, an automotive version of
their smartphone SoC, but otherwise no major changes.
- Microchip adds the SAMA5D29 SoC in the SAMA5 family, and a number
of improvements for the recently added SAMA7 family. The LAN966 SoC
that was added in the platform code does not have dts files yet.
Two board files are added for the older at91sam9g20 SoC
- Aspeed supports two additional server boards using their AST2600 as
BMC, and improves support for qemu models
- Rockchip RK3566/RK3688 gets added, along with six new development
boards using RK3328/RK3399/RK3566, and one Chromebook tablet.
- Two NAS boxes are added using the ARMv4 based Gemini platform
- One new board is added to the Intel Arria SoC FPGA family
- Marvell adds one network switch based on Armada 381 and the new
MOCHAbin 7040 development board
- NXP adds support for the S32G2 automotive SoC, two imx6 based ebook
readers, and three additional development boards, which is notably
less than their usual additions, but they also gain improvements to
their many existing boards
- STmicroelectronics adds their stm32mp13 SoC family along with a
reference board
- Renesas adds new versions of their R-Car Gen3 SoCs and many updates
for their older generations
- Broadcom adds support for a number of Cisco Meraki wireless
controllers, along with two new boards and other updates for
BCM53xx/BCM47xx networking SoCs and the Raspberry Pi boards
- Mediatek improves support for the MT81xx SoCs used in Chromebooks
as well as the MT76xx networking SoCs
- NVIDIA adds a number of cleanups and additional support for more
hardware on the already supported machines
- TI K3 adds support for three new boards along with cleanups
- Toshiba adds one board for the Visconti family
- Xilinx adds five new ZynqMP based machines
- Amlogic support is added for the Radxa Zero and two Jethub home
automation controllers, along with changes to other machines
- Rob Herring continues his work on fixing dtc warnings all over the
tree.
- Minor updates for TI OMAP, Mstar, Allwinner/sunxi, Hisilicon,
Ux500, Unisoc"
* tag 'dt-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (720 commits)
arm64: dts: apple: j274: Expose PCI node for the Ethernet MAC address
arm64: dts: apple: t8103: Add root port interrupt routing
arm64: dts: apple: t8103: Add PCIe DARTs
arm64: apple: Add PCIe node
arm64: apple: Add pinctrl nodes
ARM: dts: arm: Update ICST clock nodes 'reg' and node names
ARM: dts: arm: Update register-bit-led nodes 'reg' and node names
arm64: dts: exynos: add chipid node for exynosautov9 SoC
ARM: dts: qcom: fix typo in IPQ8064 thermal-sensor node
Revert "arm64: dts: qcom: msm8916-asus-z00l: Add sensors"
arm64: dts: qcom: ipq6018: Remove unused 'iface_clk' property from dma-controller node
arm64: dts: qcom: ipq6018: Remove unused 'qcom,config-pipe-trust-reg' property
arm64: dts: qcom: sm8350: Add CPU topology and idle-states
arm64: dts: qcom: Drop unneeded extra device-specific includes
arm64: dts: qcom: msm8916: Drop standalone smem node
arm64: dts: qcom: Fix node name of rpm-msg-ram device nodes
arm64: dts: qcom: msm8916-asus-z00l: Add sensors
arm64: dts: qcom: msm8916-asus-z00l: Add SDCard
arm64: dts: qcom: msm8916-asus-z00l: Add touchscreen
arm64: dts: qcom: sdm845-oneplus: remove devinfo-size from ramoops node
...
Pull ARM SoC updates from Arnd Bergmann:
"The SoC updates this time are mainly removing obsolete code from the
OMAP2 platform, another step in the eternal cleanup of that platform.
There are two new SoCs getting added: STMicroelectronics stm32mp13 and
Microchip lan966. Both fit into existing platforms and require minimal
changes here.
A couple of MAINTAINER file updates relate to those changes, and
update some file paths"
* tag 'soc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (28 commits)
MAINTAINERS: Update BCM7XXX entry with additional patterns
MAINTAINERS: add pinctrl-apple-gpio to ARM/APPLE MACHINE
MAINTAINERS: Add pasemi i2c to ARM/APPLE MACHINE
ARM: SPEAr: Update MAINTAINERS entries
ARM: OMAP2+: Drop unused CM defines for am3
ARM: OMAP2+: Drop unused CM and SCRM defines for omap4
ARM: OMAP2+: Drop unused CM and SCRM defines for omap5
ARM: OMAP2+: Drop unused CM defines for dra7
ARM: OMAP2+: Drop unused PRM defines for am3
ARM: OMAP2+: Drop unused PRM defines for am4
ARM: OMAP2+: Drop unused PRM defines for omap4
ARM: OMAP2+: Drop unused PRM defines for omap5
ARM: OMAP2+: Drop unused PRM defines for dra7
ARM: OMAP2+: Fix comment typo
ARM: OMAP2+: Fix typo in some comments
ARM: at91: add basic support for new SoC family lan966
dt-bindings: arm: at91: Document lan966 pcb8291 and pcb8290 boards
ARM: at91: Documentation: add lan966 family
ARM: at91: Documentation: add sama7g5 family
MAINTAINERS: add an entry for NXP S32G boards
...
