Pull block updates from Jens Axboe:
- Fix head insertion for mq-deadline, a regression from when priority
support was added
- Series simplifying and improving the ublk user copy code
- Various ublk related cleanups
- Fixup REQ_NOWAIT handling in loop/zloop, clearing NOWAIT when the
request is punted to a thread for handling
- Merge and then later revert loop dio nowait support, as it ended up
causing excessive stack usage for when the inline issue code needs to
dip back into the full file system code
- Improve auto integrity code, making it less deadlock prone
- Speedup polled IO handling, but manually managing the hctx lookups
- Fixes for blk-throttle for SSD devices
- Small series with fixes for the S390 dasd driver
- Add support for caching zones, avoiding unnecessary report zone
queries
- MD pull requests via Yu:
- fix null-ptr-dereference regression for dm-raid0
- fix IO hang for raid5 when array is broken with IO inflight
- remove legacy 1s delay to speed up system shutdown
- change maintainer's email address
- data can be lost if array is created with different lbs devices,
fix this problem and record lbs of the array in metadata
- fix rcu protection for md_thread
- fix mddev kobject lifetime regression
- enable atomic writes for md-linear
- some cleanups
- bcache updates via Coly
- remove useless discard and cache device code
- improve usage of per-cpu workqueues
- Reorganize the IO scheduler switching code, fixing some lockdep
reports as well
- Improve the block layer P2P DMA support
- Add support to the block tracing code for zoned devices
- Segment calculation improves, and memory alignment flexibility
improvements
- Set of prep and cleanups patches for ublk batching support. The
actual batching hasn't been added yet, but helps shrink down the
workload of getting that patchset ready for 6.20
- Fix for how the ps3 block driver handles segments offsets
- Improve how block plugging handles batch tag allocations
- nbd fixes for use-after-free of the configuration on device clear/put
- Set of improvements and fixes for zloop
- Add Damien as maintainer of the block zoned device code handling
- Various other fixes and cleanups
* tag 'for-6.19/block-20251201' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
block/rnbd: correct all kernel-doc complaints
blk-mq: use queue_hctx in blk_mq_map_queue_type
md: remove legacy 1s delay in md_notify_reboot
md/raid5: fix IO hang when array is broken with IO inflight
md: warn about updating super block failure
md/raid0: fix NULL pointer dereference in create_strip_zones() for dm-raid
sbitmap: fix all kernel-doc warnings
ublk: add helper of __ublk_fetch()
ublk: pass const pointer to ublk_queue_is_zoned()
ublk: refactor auto buffer register in ublk_dispatch_req()
ublk: add `union ublk_io_buf` with improved naming
ublk: add parameter `struct io_uring_cmd *` to ublk_prep_auto_buf_reg()
kfifo: add kfifo_alloc_node() helper for NUMA awareness
blk-mq: fix potential uaf for 'queue_hw_ctx'
blk-mq: use array manage hctx map instead of xarray
ublk: prevent invalid access with DEBUG
s390/dasd: Use scnprintf() instead of sprintf()
s390/dasd: Move device name formatting into separate function
s390/dasd: Remove unnecessary debugfs_create() return checks
s390/dasd: Fix gendisk parent after copy pair swap
...
Pull bpf updates from Alexei Starovoitov:
- Convert selftests/bpf/test_tc_edt and test_tc_tunnel from .sh to
test_progs runner (Alexis Lothoré)
- Convert selftests/bpf/test_xsk to test_progs runner (Bastien
Curutchet)
- Replace bpf memory allocator with kmalloc_nolock() in
bpf_local_storage (Amery Hung), and in bpf streams and range tree
(Puranjay Mohan)
- Introduce support for indirect jumps in BPF verifier and x86 JIT
(Anton Protopopov) and arm64 JIT (Puranjay Mohan)
- Remove runqslower bpf tool (Hoyeon Lee)
- Fix corner cases in the verifier to close several syzbot reports
(Eduard Zingerman, KaFai Wan)
- Several improvements in deadlock detection in rqspinlock (Kumar
Kartikeya Dwivedi)
- Implement "jmp" mode for BPF trampoline and corresponding
DYNAMIC_FTRACE_WITH_JMP. It improves "fexit" program type performance
from 80 M/s to 136 M/s. With Steven's Ack. (Menglong Dong)
- Add ability to test non-linear skbs in BPF_PROG_TEST_RUN (Paul
Chaignon)
- Do not let BPF_PROG_TEST_RUN emit invalid GSO types to stack (Daniel
Borkmann)
- Generalize buildid reader into bpf_dynptr (Mykyta Yatsenko)
- Optimize bpf_map_update_elem() for map-in-map types (Ritesh
Oedayrajsingh Varma)
- Introduce overwrite mode for BPF ring buffer (Xu Kuohai)
* tag 'bpf-next-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (169 commits)
bpf: optimize bpf_map_update_elem() for map-in-map types
bpf: make kprobe_multi_link_prog_run always_inline
selftests/bpf: do not hardcode target rate in test_tc_edt BPF program
selftests/bpf: remove test_tc_edt.sh
selftests/bpf: integrate test_tc_edt into test_progs
selftests/bpf: rename test_tc_edt.bpf.c section to expose program type
selftests/bpf: Add success stats to rqspinlock stress test
rqspinlock: Precede non-head waiter queueing with AA check
rqspinlock: Disable spinning for trylock fallback
rqspinlock: Use trylock fallback when per-CPU rqnode is busy
rqspinlock: Perform AA checks immediately
rqspinlock: Enclose lock/unlock within lock entry acquisitions
bpf: Remove runqslower tool
selftests/bpf: Remove usage of lsm/file_alloc_security in selftest
bpf: Disable file_alloc_security hook
bpf: check for insn arrays in check_ptr_alignment
bpf: force BPF_F_RDONLY_PROG on insn array creation
bpf: Fix exclusive map memory leak
selftests/bpf: Make CS length configurable for rqspinlock stress test
selftests/bpf: Add lock wait time stats to rqspinlock stress test
...
Pull printk updates from Petr Mladek:
- Allow creaing nbcon console drivers with an unsafe write_atomic()
callback that can only be called by the final nbcon_atomic_flush_unsafe().
Otherwise, the driver would rely on the kthread.
It is going to be used as the-best-effort approach for an
experimental nbcon netconsole driver, see
https://lore.kernel.org/r/20251121-nbcon-v1-2-503d17b2b4af@debian.org
Note that a safe .write_atomic() callback is supposed to work in NMI
context. But some networking drivers are not safe even in IRQ
context:
https://lore.kernel.org/r/oc46gdpmmlly5o44obvmoatfqo5bhpgv7pabpvb6sjuqioymcg@gjsma3ghoz35
In an ideal world, all networking drivers would be fixed first and
the atomic flush would be blocked only in NMI context. But it brings
the question how reliable networking drivers are when the system is
in a bad state. They might block flushing more reliable serial
consoles which are more suitable for serious debugging anyway.
- Allow to use the last 4 bytes of the printk ring buffer.
- Prevent queuing IRQ work and block printk kthreads when consoles are
suspended. Otherwise, they create non-necessary churn or even block
the suspend.
- Release console_lock() between each record in the kthread used for
legacy consoles on RT. It might significantly speed up the boot.
- Release nbcon context between each record in the atomic flush. It
prevents stalls of the related printk kthread after it has lost the
ownership in the middle of a record
- Add support for NBCON consoles into KDB
- Add %ptsP modifier for printing struct timespec64 and use it where
possible
- Misc code clean up
* tag 'printk-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: (48 commits)
printk: Use console_is_usable on console_unblank
arch: um: kmsg_dump: Use console_is_usable
drivers: serial: kgdboc: Drop checks for CON_ENABLED and CON_BOOT
lib/vsprintf: Unify FORMAT_STATE_NUM handlers
printk: Avoid irq_work for printk_deferred() on suspend
printk: Avoid scheduling irq_work on suspend
printk: Allow printk_trigger_flush() to flush all types
tracing: Switch to use %ptSp
scsi: snic: Switch to use %ptSp
scsi: fnic: Switch to use %ptSp
s390/dasd: Switch to use %ptSp
ptp: ocp: Switch to use %ptSp
pps: Switch to use %ptSp
PCI: epf-test: Switch to use %ptSp
net: dsa: sja1105: Switch to use %ptSp
mmc: mmc_test: Switch to use %ptSp
media: av7110: Switch to use %ptSp
ipmi: Switch to use %ptSp
igb: Switch to use %ptSp
e1000e: Switch to use %ptSp
...
Pull cred guard updates from Christian Brauner:
"This contains substantial credential infrastructure improvements
adding guard-based credential management that simplifies code and
eliminates manual reference counting in many subsystems.
Features:
- Kernel Credential Guards
Add with_kernel_creds() and scoped_with_kernel_creds() guards that
allow using the kernel credentials without allocating and copying
them. This was requested by Linus after seeing repeated
prepare_kernel_creds() calls that duplicate the kernel credentials
only to drop them again later.
The new guards completely avoid the allocation and never expose the
temporary variable to hold the kernel credentials anywhere in
callers.
- Generic Credential Guards
Add scoped_with_creds() guards for the common override_creds() and
revert_creds() pattern. This builds on earlier work that made
override_creds()/revert_creds() completely reference count free.
- Prepare Credential Guards
Add prepare credential guards for the more complex pattern of
preparing a new set of credentials and overriding the current
credentials with them:
- prepare_creds()
- modify new creds
- override_creds()
- revert_creds()
- put_cred()
Cleanups:
- Make init_cred static since it should not be directly accessed
- Add kernel_cred() helper to properly access the kernel credentials
- Fix scoped_class() macro that was introduced two cycles ago
- coredump: split out do_coredump() from vfs_coredump() for cleaner
credential handling
- coredump: move revert_cred() before coredump_cleanup()
- coredump: mark struct mm_struct as const
- coredump: pass struct linux_binfmt as const
- sev-dev: use guard for path"
* tag 'kernel-6.19-rc1.cred' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (36 commits)
trace: use override credential guard
trace: use prepare credential guard
coredump: use override credential guard
coredump: use prepare credential guard
coredump: split out do_coredump() from vfs_coredump()
coredump: mark struct mm_struct as const
coredump: pass struct linux_binfmt as const
coredump: move revert_cred() before coredump_cleanup()
sev-dev: use override credential guards
sev-dev: use prepare credential guard
sev-dev: use guard for path
cred: add prepare credential guard
net/dns_resolver: use credential guards in dns_query()
cgroup: use credential guards in cgroup_attach_permissions()
act: use credential guards in acct_write_process()
smb: use credential guards in cifs_get_spnego_key()
nfs: use credential guards in nfs_idmap_get_key()
nfs: use credential guards in nfs_local_call_write()
nfs: use credential guards in nfs_local_call_read()
erofs: use credential guards
...
Pull ring-buffer fix from Steven Rostedt:
- Do not allow mmapped ring buffer to be split
When the ring buffer VMA is split by a partial munmap or a MAP_FIXED,
the kernel calls vm_ops->close() on each portion. This causes the
ring_buffer_unmap() to be called multiple times. This causes
subsequent calls to return -ENODEV and triggers a warning.
There's no reason to allow user space to split up memory mapping of
the ring buffer. Have it return -EINVAL when that happens.
* tag 'trace-ringbuffer-v6.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Fix WARN_ON in tracing_buffers_mmap_close for split VMAs
For now, the "nop" will be replaced with a "call" instruction when a
function is hooked by the ftrace. However, sometimes the "call" can break
the RSB and introduce extra overhead. Therefore, introduce the flag
FTRACE_OPS_FL_JMP, which indicate that the ftrace_ops should be called
with a "jmp" instead of "call". For now, it is only used by the direct
call case.
When a direct ftrace_ops is marked with FTRACE_OPS_FL_JMP, the last bit of
the ops->direct_call will be set to 1. Therefore, we can tell if we should
use "jmp" for the callback in ftrace_call_replace().
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20251118123639.688444-2-dongml2@chinatelecom.cn
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull bpf fixes from Alexei Starovoitov:
- Fix interaction between livepatch and BPF fexit programs (Song Liu)
With Steven and Masami acks.
- Fix stack ORC unwind from BPF kprobe_multi (Jiri Olsa)
With Steven and Masami acks.
- Fix out of bounds access in widen_imprecise_scalars() in the verifier
(Eduard Zingerman)
- Fix conflicts between MPTCP and BPF sockmap (Jiayuan Chen)
- Fix net_sched storage collision with BPF data_meta/data_end (Eric
Dumazet)
- Add _impl suffix to BPF kfuncs with implicit args to avoid breaking
them in bpf-next when KF_IMPLICIT_ARGS is added (Mykyta Yatsenko)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Test widen_imprecise_scalars() with different stack depth
bpf: account for current allocated stack depth in widen_imprecise_scalars()
bpf: Add bpf_prog_run_data_pointers()
selftests/bpf: Add mptcp test with sockmap
mptcp: Fix proto fallback detection with BPF
mptcp: Disallow MPTCP subflows from sockmap
selftests/bpf: Add stacktrace ips test for raw_tp
selftests/bpf: Add stacktrace ips test for kprobe_multi/kretprobe_multi
x86/fgraph,bpf: Fix stack ORC unwind from kprobe_multi return probe
Revert "perf/x86: Always store regs->ip in perf_callchain_kernel()"
bpf: add _impl suffix for bpf_stream_vprintk() kfunc
bpf:add _impl suffix for bpf_task_work_schedule* kfuncs
selftests/bpf: Add tests for livepatch + bpf trampoline
ftrace: bpf: Fix IPMODIFY + DIRECT in modify_ftrace_direct()
ftrace: Fix BPF fexit with livepatch
Pull tracing fixes from Steven Rostedt:
- Check for reader catching up in ring_buffer_map_get_reader()
If the reader catches up to the writer in the memory mapped ring
buffer then calling rb_get_reader_page() will return NULL as there's
no pages left. But this isn't checked for before calling
rb_get_reader_page() and the return of NULL causes a warning.
If it is detected that the reader caught up to the writer, then
simply exit the routine
- Fix memory leak in histogram create_field_var()
The couple of the error paths in create_field_var() did not properly
clean up what was allocated. Make sure everything is freed properly
on error
- Fix help message of tools latency_collector
The help message incorrectly stated that "-t" was the same as
"--threads" whereas "--threads" is actually represented by "-e"
* tag 'trace-v6.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/tools: Fix incorrcet short option in usage text for --threads
tracing: Fix memory leaks in create_field_var()
ring-buffer: Do not warn in ring_buffer_map_get_reader() when reader catches up
The function create_field_var() allocates memory for 'val' through
create_hist_field() inside parse_atom(), and for 'var' through
create_var(), which in turn allocates var->type and var->var.name
internally. Simply calling kfree() to release these structures will
result in memory leaks.
Use destroy_hist_field() to properly free 'val', and explicitly release
the memory of var->type and var->var.name before freeing 'var' itself.
Link: https://patch.msgid.link/20251106120132.3639920-1-zilin@seu.edu.cn
Fixes: 02205a6752 ("tracing: Add support for 'field variables'")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Since __tracepoint_user_init() calls tracepoint_user_register() without
initializing tuser->tpoint with given tracpoint, it does not register
tracepoint stub function as callback correctly, and tprobe does not work.
Initializing tuser->tpoint correctly before tracepoint_user_register()
so that it sets up tracepoint callback.
I confirmed below example works fine again.
echo "t sched_switch preempt prev_pid=prev->pid next_pid=next->pid" > /sys/kernel/tracing/dynamic_events
echo 1 > /sys/kernel/tracing/events/tracepoints/sched_switch/enable
cat /sys/kernel/tracing/trace_pipe
Link: https://lore.kernel.org/all/176244793514.155515.6466348656998627773.stgit@devnote2/
Fixes: 2867495dea ("tracing: tprobe-events: Register tracepoint when enable tprobe event")
Reported-by: Beau Belgrave <beaub@linux.microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Tested-by: Beau Belgrave <beaub@linux.microsoft.com>
Reviewed-by: Beau Belgrave <beaub@linux.microsoft.com>
ftrace_hash_ipmodify_enable() checks IPMODIFY and DIRECT ftrace_ops on
the same kernel function. When needed, ftrace_hash_ipmodify_enable()
calls ops->ops_func() to prepare the direct ftrace (BPF trampoline) to
share the same function as the IPMODIFY ftrace (livepatch).
ftrace_hash_ipmodify_enable() is called in register_ftrace_direct() path,
but not called in modify_ftrace_direct() path. As a result, the following
operations will break livepatch:
1. Load livepatch to a kernel function;
2. Attach fentry program to the kernel function;
3. Attach fexit program to the kernel function.
After 3, the kernel function being used will not be the livepatched
version, but the original version.
Fix this by adding __ftrace_hash_update_ipmodify() to
__modify_ftrace_direct() and adjust some logic around the call.
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-3-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
When livepatch is attached to the same function as bpf trampoline with
a fexit program, bpf trampoline code calls register_ftrace_direct()
twice. The first time will fail with -EAGAIN, and the second time it
will succeed. This requires register_ftrace_direct() to unregister
the address on the first attempt. Otherwise, the bpf trampoline cannot
attach. Here is an easy way to reproduce this issue:
insmod samples/livepatch/livepatch-sample.ko
bpftrace -e 'fexit:cmdline_proc_show {}'
ERROR: Unable to attach probe: fexit:vmlinux:cmdline_proc_show...
Fix this by cleaning up the hash when register_ftrace_function_nolock hits
errors.
Also, move the code that resets ops->func and ops->trampoline to the error
path of register_ftrace_direct(); and add a helper function reset_direct()
in register_ftrace_direct() and unregister_ftrace_direct().
Fixes: d05cb47066 ("ftrace: Fix modification of direct_function hash while in use")
Cc: stable@vger.kernel.org # v6.6+
Reported-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Closes: https://lore.kernel.org/live-patching/c5058315a39d4615b333e485893345be@crowdstrike.com/
Cc: Steven Rostedt (Google) <rostedt@goodmis.org>
Cc: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@crowdstrike.com>
Signed-off-by: Song Liu <song@kernel.org>
Reviewed-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20251027175023.1521602-2-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The ftrace blktrace path allocates buffers and writes trace events but
was using the wrong recording function. After
commit 4d8bc7bd4f ("blktrace: move ftrace blk_io_tracer to blk_io_trace2"),
the ftrace interface was moved to use blk_io_trace2 format, but
__blk_add_trace() still called record_blktrace_event() which writes in
blk_io_trace (v1) format.
This causes critical data corruption:
- blk_io_trace (v1) has 32-bit 'action' field at offset 28
- blk_io_trace2 (v2) has 32-bit 'pid' at offset 28 and 64-bit 'action'
at offset 32
- When record_blktrace_event() writes to a v2 buffer:
* Writing pid (offset 32 in v1) corrupts the v2 action field
* Writing action (offset 28 in v1) corrupts the v2 pid field
* The 64-bit action is truncated to 32-bit via lower_32_bits()
Fix by:
1. Adding version switch to select correct format (v1 vs v2)
2. Calling appropriate recording function based on version
3. Defaulting to v2 for ftrace (as intended by commit 4d8bc7bd4f)
4. Adding WARN_ONCE for unexpected version values
Without this patch :-
linux-block (for-next) # sh reproduce_blktrace_bug.sh
dd-14242 [033] d..1. 3903.022308: Unknown action 36a2
dd-14242 [033] d..1. 3903.022333: Unknown action 36a2
dd-14242 [033] d..1. 3903.022365: Unknown action 36a2
dd-14242 [033] d..1. 3903.022366: Unknown action 36a2
dd-14242 [033] d..1. 3903.022369: Unknown action 36a2
The action field is corrupted because:
- ftrace allocated blk_io_trace2 buffer (64 bytes)
- But called record_blktrace_event() (writes v1, 48 bytes)
- Field offsets don't match, causing corruption
The hex value shown 0x30e3 is actually a PID, not an action code!
linux-block (for-next) #
linux-block (for-next) #
linux-block (for-next) # sh reproduce_blktrace_bug.sh
Trace output looks correct:
dd-2420 [019] d..1. 59.641742: 251,0 Q RS 0 + 8 [dd]
dd-2420 [019] d..1. 59.641775: 251,0 G RS 0 + 8 [dd]
dd-2420 [019] d..1. 59.641784: 251,0 P N [dd]
dd-2420 [019] d..1. 59.641785: 251,0 U N [dd] 1
dd-2420 [019] d..1. 59.641788: 251,0 D RS 0 + 8 [dd]
Fixes: 4d8bc7bd4f ("blktrace: move ftrace blk_io_tracer to blk_io_trace2")
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The WARN_ON_ONCE introduced in
commit f9ee38bbf7 ("blktrace: add block trace commands for zone operations")
triggers kernel warnings when zone operations are traced with blktrace
version 1. This can spam the kernel log during normal operation with
zoned block devices when userspace is using the legacy blktrace
protocol.
Currently blktrace implementation drops newly added REQ_OP_ZONE_XXX
when blktrace userspce version is set to 1.
Remove the WARN_ON_ONCE and quietly filter these events. Add a
rate-limited debug message to help diagnose potential issues without
flooding the kernel log. The debug message can be enabled via dynamic
debug when needed for troubleshooting.
This approach is more appropriate as encountering zone operations with
blktrace v1 is an expected condition that should be handled gracefully
rather than warned about, since users may be running older blktrace
userspace tools that only support version 1 of the protocol.
With this patch :-
linux-block (for-next) # git log -1
commit c8966006a0971d2b4bf94c0426eb7e4407c6853f (HEAD -> for-next)
Author: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Date: Mon Oct 27 19:26:53 2025 -0700
blktrace: use debug print to report dropped events
linux-block (for-next) # cdblktests
blktests (master) # ./check blktrace
blktrace/001 (blktrace zone management command tracing) [passed]
runtime 3.805s ... 3.889s
blktests (master) # dmesg -c
blktests (master) # echo "file kernel/trace/blktrace.c +p" > /sys/kernel/debug/dynamic_debug/control
blktests (master) # ./check blktrace
blktrace/001 (blktrace zone management command tracing) [passed]
runtime 3.889s ... 3.881s
blktests (master) # dmesg -c
[ 77.826237] blktrace: blktrace v1 cannot trace zone operation 0x1000190001
[ 77.826260] blktrace: blktrace v1 cannot trace zone operation 0x1000190004
[ 77.826282] blktrace: blktrace v1 cannot trace zone operation 0x1001490007
[ 77.826288] blktrace: blktrace v1 cannot trace zone operation 0x1001890008
[ 77.826343] blktrace: blktrace v1 cannot trace zone operation 0x1000190001
[ 77.826347] blktrace: blktrace v1 cannot trace zone operation 0x1000190004
[ 77.826350] blktrace: blktrace v1 cannot trace zone operation 0x1001490007
[ 77.826354] blktrace: blktrace v1 cannot trace zone operation 0x1001890008
[ 77.826373] blktrace: blktrace v1 cannot trace zone operation 0x1000190001
[ 77.826377] blktrace: blktrace v1 cannot trace zone operation 0x1000190004
blktests (master) # echo "file kernel/trace/blktrace.c -p" > /sys/kernel/debug/dynamic_debug/control
blktests (master) # ./check blktrace
blktrace/001 (blktrace zone management command tracing) [passed]
runtime 3.881s ... 3.824s
blktests (master) # dmesg -c
blktests (master) #
Reported-by: syzbot+153e64c0aa875d7e4c37@syzkaller.appspotmail.com
Fixes: f9ee38bbf7 ("blktrace: add block trace commands for zone operations")
Signed-off-by: Chaitanya Kulkarni <ckulkarnilinux@gmail.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Dynptr currently caps size and offset at 24 bits, which isn’t sufficient
for file-backed use cases; even 32 bits can be limiting. Refactor dynptr
helpers/kfuncs to use 64-bit size and offset, ensuring consistency
across the APIs.
This change does not affect internals of xdp, skb or other dynptrs,
which continue to behave as before. Also it does not break binary
compatibility.
The widening enables large-file access support via dynptr, implemented
in the next patches.
Signed-off-by: Mykyta Yatsenko <yatsenko@meta.com>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20251026203853.135105-3-mykyta.yatsenko5@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Trace zone write plugging operations on block devices.
As tracing of zoned block commands needs the upper 32bit of the widened
64bit action, only add traces to blktrace if user-space has requested
version 2 of the blktrace protocol.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Expose ZONE APPEND completions as a block trace completion action to
blktrace.
As tracing of zoned block commands needs the upper 32bit of the widened
64bit action, only add traces to blktrace if user-space has requested
version 2 of the blktrace protocol.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add block trace commands for zone operations. These commands can only be
handled with version 2 of the blktrace protocol. For version 1, warn if a
command that does not fit into the 16 bits reserved for the command in
this version is passed in.
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Differentiate between blk_io_trace and blk_io_trace2 when relaying to
user-space depending on which version has been requested by the blktrace
utility.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add definitions for the extended version of the blktrace protocol using a
wider action type to be able to record new actions in the kernel.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pass struct blk_user_trace_setup2 to blktrace_setup_finalize(). This
prepares for the incoming extension of the blktrace protocol with a 64bit
act_mask.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add definitions for a version 2 of the blk_user_trace_setup ioctl. This
new ioctl will enable a different struct layout of the binary data passed
to user-space when using a new version of the blktrace utility requesting
the new struct layout.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split do_blk_trace_setup into two functions, this is done to prepare for
an incoming new BLKTRACESETUP2 ioctl(2) which can receive extended
parameters from user-space.
Also move the size verification logic to the callers in preparation for
using a new internal structure later.
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Change the internal use of the action in blktrace to 64bit. Although for
now only the lower 32bits will be used.
With the upcoming version 2 of the blktrace user-space protocol the upper
32bit will also be utilized.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Untangle the if/else sequence setting the trace action in
__blk_add_trace() and turn it into a switch statement for better
extensibility.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Split out the code relaying a blktrace event to user-space using relayfs.
This enables adding a second version supporting a new version of the
protocol.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Factor out the recording of a blktrace event into its own function,
deduplicating the code.
This also enables recording different versions of the blktrace protocol
later on.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
De-duplicate the calculation of the trace length instead of doing the
calculation twice, once for calling trace_buffer_lock_reserve() and once
for calling relay_reserve().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull tracing fixes from Steven Rostedt:
"The previous fix to trace_marker required updating trace_marker_raw as
well. The difference between trace_marker_raw from trace_marker is
that the raw version is for applications to write binary structures
directly into the ring buffer instead of writing ASCII strings. This
is for applications that will read the raw data from the ring buffer
and get the data structures directly. It's a bit quicker than using
the ASCII version.
Unfortunately, it appears that our test suite has several tests that
test writes to the trace_marker file, but lacks any tests to the
trace_marker_raw file (this needs to be remedied). Two issues came
about the update to the trace_marker_raw file that syzbot found:
- Fix tracing_mark_raw_write() to use per CPU buffer
The fix to use the per CPU buffer to copy from user space was
needed for both the trace_maker and trace_maker_raw file.
The fix for reading from user space into per CPU buffers properly
fixed the trace_marker write function, but the trace_marker_raw
file wasn't fixed properly. The user space data was correctly
written into the per CPU buffer, but the code that wrote into the
ring buffer still used the user space pointer and not the per CPU
buffer that had the user space data already written.
- Stop the fortify string warning from writing into trace_marker_raw
After converting the copy_from_user_nofault() into a memcpy(),
another issue appeared. As writes to the trace_marker_raw expects
binary data, the first entry is a 4 byte identifier. The entry
structure is defined as:
struct {
struct trace_entry ent;
int id;
char buf[];
};
The size of this structure is reserved on the ring buffer with:
size = sizeof(*entry) + cnt;
Then it is copied from the buffer into the ring buffer with:
memcpy(&entry->id, buf, cnt);
This use to be a copy_from_user_nofault(), but now converting it to
a memcpy() triggers the fortify-string code, and causes a warning.
The allocated space is actually more than what is copied, as the
cnt used also includes the entry->id portion. Allocating
sizeof(*entry) plus cnt is actually allocating 4 bytes more than
what is needed.
Change the size function to:
size = struct_size(entry, buf, cnt - sizeof(entry->id));
And update the memcpy() to unsafe_memcpy()"
* tag 'trace-v6.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Stop fortify-string from warning in tracing_mark_raw_write()
tracing: Fix tracing_mark_raw_write() to use buf and not ubuf
The fix to use a per CPU buffer to read user space tested only the writes
to trace_marker. But it appears that the selftests are missing tests to
the trace_maker_raw file. The trace_maker_raw file is used by applications
that writes data structures and not strings into the file, and the tools
read the raw ring buffer to process the structures it writes.
The fix that reads the per CPU buffers passes the new per CPU buffer to
the trace_marker file writes, but the update to the trace_marker_raw write
read the data from user space into the per CPU buffer, but then still used
then passed the user space address to the function that records the data.
Pass in the per CPU buffer and not the user space address.
TODO: Add a test to better test trace_marker_raw.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/20251011035243.386098147@kernel.org
Fixes: 64cf7d058a ("tracing: Have trace_marker use per-cpu data to read user space")
Reported-by: syzbot+9a2ede1643175f350105@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68e973f5.050a0220.1186a4.0010.GAE@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull tracing clean up and fixes from Steven Rostedt:
- Have osnoise tracer use memdup_user_nul()
The function osnoise_cpus_write() open codes a kmalloc() and then a
copy_from_user() and then adds a nul byte at the end which is the
same as simply using memdup_user_nul().
- Fix wakeup and irq tracers when failing to acquire calltime
When the wakeup and irq tracers use the function graph tracer for
tracing function times, it saves a timestamp into the fgraph shadow
stack. It is possible that this could fail to be stored. If that
happens, it exits the routine early. These functions also disable
nesting of the operations by incremeting the data "disable" counter.
But if the calltime exits out early, it never increments the counter
back to what it needs to be.
Since there's only a couple of lines of code that does work after
acquiring the calltime, instead of exiting out early, reverse the if
statement to be true if calltime is acquired, and place the code that
is to be done within that if block. The clean up will always be done
after that.
- Fix ring_buffer_map() return value on failure of __rb_map_vma()
If __rb_map_vma() fails in ring_buffer_map(), it does not return an
error. This means the caller will be working against a bad vma
mapping. Have ring_buffer_map() return an error when __rb_map_vma()
fails.
- Fix regression of writing to the trace_marker file
A bug fix was made to change __copy_from_user_inatomic() to
copy_from_user_nofault() in the trace_marker write function. The
trace_marker file is used by applications to write into it (usually
with a file descriptor opened at the start of the program) to record
into the tracing system. It's usually used in critical sections so
the write to trace_marker is highly optimized.
The reason for copying in an atomic section is that the write
reserves space on the ring buffer and then writes directly into it.
After it writes, it commits the event. The time between reserve and
commit must have preemption disabled.
The trace marker write does not have any locking nor can it allocate
due to the nature of it being a critical path.
Unfortunately, converting __copy_from_user_inatomic() to
copy_from_user_nofault() caused a regression in Android. Now all the
writes from its applications trigger the fault that is rejected by
the _nofault() version that wasn't rejected by the _inatomic()
version. Instead of getting data, it now just gets a trace buffer
filled with:
tracing_mark_write: <faulted>
To fix this, on opening of the trace_marker file, allocate per CPU
buffers that can be used by the write call. Then when entering the
write call, do the following:
preempt_disable();
cpu = smp_processor_id();
buffer = per_cpu_ptr(cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu(cpu);
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, size);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu(cpu));
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
This works similarly to seqcount. As it must enabled preemption to do
a copy_from_user() into a per CPU buffer, if it gets preempted, the
buffer could be corrupted by another task.
To handle this, read the number of context switches of the current
CPU, disable migration, enable preemption, copy the data from user
space, then immediately disable preemption again. If the number of
context switches is the same, the buffer is still valid. Otherwise it
must be assumed that the buffer may have been corrupted and it needs
to try again.
Now the trace_marker write can get the user data even if it has to
fault it in, and still not grab any locks of its own.
* tag 'trace-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have trace_marker use per-cpu data to read user space
ring buffer: Propagate __rb_map_vma return value to caller
tracing: Fix irqoff tracers on failure of acquiring calltime
tracing: Fix wakeup tracers on failure of acquiring calltime
tracing/osnoise: Replace kmalloc + copy_from_user with memdup_user_nul
It was reported that using __copy_from_user_inatomic() can actually
schedule. Which is bad when preemption is disabled. Even though there's
logic to check in_atomic() is set, but this is a nop when the kernel is
configured with PREEMPT_NONE. This is due to page faulting and the code
could schedule with preemption disabled.
Link: https://lore.kernel.org/all/20250819105152.2766363-1-luogengkun@huaweicloud.com/
The solution was to change the __copy_from_user_inatomic() to
copy_from_user_nofault(). But then it was reported that this caused a
regression in Android. There's several applications writing into
trace_marker() in Android, but now instead of showing the expected data,
it is showing:
tracing_mark_write: <faulted>
After reverting the conversion to copy_from_user_nofault(), Android was
able to get the data again.
Writes to the trace_marker is a way to efficiently and quickly enter data
into the Linux tracing buffer. It takes no locks and was designed to be as
non-intrusive as possible. This means it cannot allocate memory, and must
use pre-allocated data.
A method that is actively being worked on to have faultable system call
tracepoints read user space data is to allocate per CPU buffers, and use
them in the callback. The method uses a technique similar to seqcount.
That is something like this:
preempt_disable();
cpu = smp_processor_id();
buffer = this_cpu_ptr(&pre_allocated_cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu(cpu);
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, size);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu(cpu));
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
It's a little more involved than that, but the above is the basic logic.
The idea is to acquire the current CPU buffer, disable migration, and then
enable preemption. At this moment, it can safely use copy_from_user().
After reading the data from user space, it disables preemption again. It
then checks to see if there was any new scheduling on this CPU. If there
was, it must assume that the buffer was corrupted by another task. If
there wasn't, then the buffer is still valid as only tasks in preemptable
context can write to this buffer and only those that are running on the
CPU.
By using this method, where trace_marker open allocates the per CPU
buffers, trace_marker writes can access user space and even fault it in,
without having to allocate or take any locks of its own.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Luo Gengkun <luogengkun@huaweicloud.com>
Cc: Wattson CI <wattson-external@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/20251008124510.6dba541a@gandalf.local.home
Fixes: 3d62ab32df ("tracing: Fix tracing_marker may trigger page fault during preempt_disable")
Reported-by: Runping Lai <runpinglai@google.com>
Tested-by: Runping Lai <runpinglai@google.com>
Closes: https://lore.kernel.org/linux-trace-kernel/20251007003417.3470979-2-runpinglai@google.com/
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
