Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
Pull kthread updates from Frederic Weisbecker:
"Kthreads affinity follow either of 4 existing different patterns:
1) Per-CPU kthreads must stay affine to a single CPU and never
execute relevant code on any other CPU. This is currently handled
by smpboot code which takes care of CPU-hotplug operations.
Affinity here is a correctness constraint.
2) Some kthreads _have_ to be affine to a specific set of CPUs and
can't run anywhere else. The affinity is set through
kthread_bind_mask() and the subsystem takes care by itself to
handle CPU-hotplug operations. Affinity here is assumed to be a
correctness constraint.
3) Per-node kthreads _prefer_ to be affine to a specific NUMA node.
This is not a correctness constraint but merely a preference in
terms of memory locality. kswapd and kcompactd both fall into this
category. The affinity is set manually like for any other task and
CPU-hotplug is supposed to be handled by the relevant subsystem so
that the task is properly reaffined whenever a given CPU from the
node comes up. Also care should be taken so that the node affinity
doesn't cross isolated (nohz_full) cpumask boundaries.
4) Similar to the previous point except kthreads have a _preferred_
affinity different than a node. Both RCU boost kthreads and RCU
exp kworkers fall into this category as they refer to "RCU nodes"
from a distinctly distributed tree.
Currently the preferred affinity patterns (3 and 4) have at least 4
identified users, with more or less success when it comes to handle
CPU-hotplug operations and CPU isolation. Each of which do it in its
own ad-hoc way.
This is an infrastructure proposal to handle this with the following
API changes:
- kthread_create_on_node() automatically affines the created kthread
to its target node unless it has been set as per-cpu or bound with
kthread_bind[_mask]() before the first wake-up.
- kthread_affine_preferred() is a new function that can be called
right after kthread_create_on_node() to specify a preferred
affinity different than the specified node.
When the preferred affinity can't be applied because the possible
targets are offline or isolated (nohz_full), the kthread is affine to
the housekeeping CPUs (which means to all online CPUs most of the time
or only the non-nohz_full CPUs when nohz_full= is set).
kswapd, kcompactd, RCU boost kthreads and RCU exp kworkers have been
converted, along with a few old drivers.
Summary of the changes:
- Consolidate a bunch of ad-hoc implementations of
kthread_run_on_cpu()
- Introduce task_cpu_fallback_mask() that defines the default last
resort affinity of a task to become nohz_full aware
- Add some correctness check to ensure kthread_bind() is always
called before the first kthread wake up.
- Default affine kthread to its preferred node.
- Convert kswapd / kcompactd and remove their halfway working ad-hoc
affinity implementation
- Implement kthreads preferred affinity
- Unify kthread worker and kthread API's style
- Convert RCU kthreads to the new API and remove the ad-hoc affinity
implementation"
* tag 'kthread-for-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks:
kthread: modify kernel-doc function name to match code
rcu: Use kthread preferred affinity for RCU exp kworkers
treewide: Introduce kthread_run_worker[_on_cpu]()
kthread: Unify kthread_create_on_cpu() and kthread_create_worker_on_cpu() automatic format
rcu: Use kthread preferred affinity for RCU boost
kthread: Implement preferred affinity
mm: Create/affine kswapd to its preferred node
mm: Create/affine kcompactd to its preferred node
kthread: Default affine kthread to its preferred NUMA node
kthread: Make sure kthread hasn't started while binding it
sched,arm64: Handle CPU isolation on last resort fallback rq selection
arm64: Exclude nohz_full CPUs from 32bits el0 support
lib: test_objpool: Use kthread_run_on_cpu()
kallsyms: Use kthread_run_on_cpu()
soc/qman: test: Use kthread_run_on_cpu()
arm/bL_switcher: Use kthread_run_on_cpu()
We are missing netif_napi_del() and am65_cpsw_nuss_free_tx/rx_chns()
in error path when am65_cpsw_nuss_init_tx/rx_chns() is used anywhere
other than at probe(). i.e. am65_cpsw_nuss_update_tx_rx_chns and
am65_cpsw_nuss_resume()
As reported, in am65_cpsw_nuss_update_tx_rx_chns(),
if am65_cpsw_nuss_init_tx_chns() partially fails then
devm_add_action(dev, am65_cpsw_nuss_free_tx_chns,..) is added
but the cleanup via am65_cpsw_nuss_free_tx_chns() will not run.
Same issue exists for am65_cpsw_nuss_init_tx/rx_chns() failures
in am65_cpsw_nuss_resume() as well.
This would otherwise require more instances of devm_add/remove_action
and is clearly more of a distraction than any benefit.
So, drop devm_add/remove_action for am65_cpsw_nuss_free_tx/rx_chns()
and call am65_cpsw_nuss_free_tx/rx_chns() and netif_napi_del()
where required.
Reported-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Closes: https://lore.kernel.org/all/m4rhkzcr7dlylxr54udyt6lal5s2q4krrvmyay6gzgzhcu4q2c@r34snfumzqxy/
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/20250117-am65-cpsw-streamline-v2-1-91a29c97e569@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Two different models of usb card, the drivers are r8152 and asix. If no
network cable is connected, Speed = 10Mb/s. This problem is repeated in
linux 3.10, 4.19, 5.4, 6.12. This problem also exists on the latest
kernel. Both drivers call mii_ethtool_get_link_ksettings,
but the value of cmd->base.speed in this
function can only be SPEED_1000 or SPEED_100 or SPEED_10.
When the network cable is not connected, set cmd->base.speed
=SPEED_UNKNOWN.
Signed-off-by: Xiangqian Zhang <zhangxiangqian@kylinos.cn>
Link: https://patch.msgid.link/20250117094603.4192594-1-zhangxiangqian@kylinos.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
300-400B RPC requests are fairly common. With the current default
of 256B HDS threshold bnxt ends up splitting those, lowering PCIe
bandwidth efficiency and increasing the number of memory allocation.
Increase the HDS threshold to fit 4 buffers in a 4k page.
This works out to 640B as the threshold on a typical kernel confing.
This change increases the performance for a microbenchmark which
receives 400B RPCs and sends empty responses by 4.5%.
Admittedly this is just a single benchmark, but 256B works out to
just 6 (so 2 more) packets per head page, because shinfo size
dominates the headers.
Now that we use page pool for the header pages I was also tempted
to default rx_copybreak to 0, but in synthetic testing the copybreak
size doesn't seem to make much difference.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250119020518.1962249-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HWMON support has been added for the RTL8221/8251 PHYs integrated together
with the MAC inside the RTL8125/8126 chips. This patch extends temperature
reading support for standalone variants of the mentioned PHYs.
I don't know whether the earlier revisions of the RTL8226 also have a
built-in temperature sensor, so they have been skipped for now.
Tested on RTL8221B-VB-CG.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
When getting the IRQ we use k3_udma_glue_tx_get_irq() which returns
negative error value on error. So not NULL check is not sufficient
to deteremine if IRQ is valid. Check that IRQ is greater then zero
to ensure it is valid.
There is no issue at probe time but at runtime user can invoke
.set_channels which results in the following call chain.
am65_cpsw_set_channels()
am65_cpsw_nuss_update_tx_rx_chns()
am65_cpsw_nuss_remove_tx_chns()
am65_cpsw_nuss_init_tx_chns()
At this point if am65_cpsw_nuss_init_tx_chns() fails due to
k3_udma_glue_tx_get_irq() then tx_chn->irq will be set to a
negative value.
Then, at subsequent .set_channels with higher channel count we
will attempt to free an invalid IRQ in am65_cpsw_nuss_remove_tx_chns()
leading to a kernel warning.
The issue is present in the original commit that introduced this driver,
although there, am65_cpsw_nuss_update_tx_rx_chns() existed as
am65_cpsw_nuss_update_tx_chns().
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace ternary (condition ? "enable" : "disable") syntax with helpers
from string_choices.h because:
1. Simple function call with one argument is easier to read. Ternary
operator has three arguments and with wrapping might lead to quite
long code.
2. Is slightly shorter thus also easier to read.
3. It brings uniformity in the text - same string.
4. Allows deduping by the linker, which results in a smaller binary
file.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kalle Valo says:
====================
wireless-next patches for v6.14
Most likely the last "new features" pull request for v6.14 and this is
a bigger one. Multi-Link Operation (MLO) work continues both in stack
in drivers. Few new devices supported and usual fixes all over.
Major changes:
cfg80211
* Emergency Preparedness Communication Services (EPCS) station mode support
mac80211
* an option to filter a sta from being flushed
* some support for RX Operating Mode Indication (OMI) power saving
* support for adding and removing station links for MLO
iwlwifi
* new device ids
* rework firmware error handling and restart
rtw88
* RTL8812A: RFE type 2 support
* LED support
rtw89
* variant info to support RTL8922AE-VS
mt76
* mt7996: single wiphy multiband support (preparation for MLO)
* mt7996: support for more variants
* mt792x: P2P_DEVICE support
* mt7921u: TP-Link TXE50UH support
ath12k
* enable MLO for QCN9274 (although it seems to be broken with dual
band devices)
* MLO radar detection support
* debugfs: transmit buffer OFDMA, AST entry and puncture stats
* tag 'wireless-next-2025-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (322 commits)
wifi: brcmfmac: fix NULL pointer dereference in brcmf_txfinalize()
wifi: rtw88: add RTW88_LEDS depends on LEDS_CLASS to Kconfig
wifi: wilc1000: unregister wiphy only after netdev registration
wifi: cfg80211: adjust allocation of colocated AP data
wifi: mac80211: fix memory leak in ieee80211_mgd_assoc_ml_reconf()
wifi: ath12k: fix key cache handling
wifi: ath12k: Fix uninitialized variable access in ath12k_mac_allocate() function
wifi: ath12k: Remove ath12k_get_num_hw() helper function
wifi: ath12k: Refactor the ath12k_hw get helper function argument
wifi: ath12k: Refactor ath12k_hw set helper function argument
wifi: mt76: mt7996: add implicit beamforming support for mt7992
wifi: mt76: mt7996: fix beacon command during disabling
wifi: mt76: mt7996: fix ldpc setting
wifi: mt76: mt7996: fix definition of tx descriptor
wifi: mt76: connac: adjust phy capabilities based on band constraints
wifi: mt76: mt7996: fix incorrect indexing of MIB FW event
wifi: mt76: mt7996: fix HE Phy capability
wifi: mt76: mt7996: fix the capability of reception of EHT MU PPDU
wifi: mt76: mt7996: add max mpdu len capability
wifi: mt76: mt7921: avoid undesired changes of the preset regulatory domain
...
====================
Link: https://patch.msgid.link/20250117203529.72D45C4CEDD@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
W=1 builds with gcc 14.2.1 report:
drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c:4193:32: error: ‘%s’ directive output may be truncated writing up to 31 bytes into a region of size 27 [-Werror=format-truncation=]
4193 | "/pkg %s", buf);
It's upset that we let buf be full length but then we use 5
characters for "/pkg ".
The builds is also clear with clang version 19.1.5 now.
Reviewed-by: Michael Chan <michael.chan@broadcom.com>
Link: https://patch.msgid.link/20250117183726.1481524-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an u64 hardware timestamping statistics structure for each ocelot
port. Export a function from the common switch library for reporting
them to ethtool. This is called by the ocelot switchdev front-end for
now.
Note that for the switchdev driver, we report the one-step PTP packets
as unconfirmed, even though in principle, for some transmission
mechanisms like FDMA, we may be able to confirm transmission and bump
the "pkts" counter in ocelot_fdma_tx_cleanup() instead. I don't have
access to hardware which uses the switchdev front-end, and I've kept the
implementation simple.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://patch.msgid.link/20250116104628.123555-4-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tx header should be added to all packets transmitted from the CPU to
Spectrum ASICs. Historically, handling this header was added as a driver
function, as Tx header is different between Spectrum and Switch-X. See
SwitchX implementation in commit 31557f0f97 ("mlxsw: Introduce
Mellanox SwitchX-2 ASIC support"). From May 2021, there is no support
for SwitchX-2 ASIC, and all the relevant code was removed.
For now, there is no justification to handle Tx header as part of
spectrum.c, we can handle this as part of PCI, in skb_transmit().
A future patch set will add support for XDP in mlxsw driver, to support
XDP_TX and XDP_REDIRECT actions, Tx header should be added before
transmitting the packet. As preparation for this, move Tx header handling
to PCI driver, so then XDP code will not have to call API from spectrum.c.
This also improves the code as now Tx header is pushed just before
transmitting, so it is not done from many flows which might miss something.
Note that for PTP, we should configure Tx header differently, use the
fields from mlxsw_txhdr_info to configure the packets correctly in PCI
driver. Handle VLAN tagging in switch driver, verify that packet which
should be transmitted as data is tagged, otherwise, tag it.
Remove the calls for thxdr_construct() functions, as now this is done as
part of skb_transmit().
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/293a81e6f7d59a8ec9f9592edb7745536649ff11.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A next patch will construct Tx header as part of pci.c. The switch driver
(mlxsw_spectrum.ko) should encapsulate all the differences between the
different ASICs and the bus driver (mlxsw_pci.ko) should remain unaware.
As preparation, add the relevant info as part of mlxsw_txhdr_info
structure, so later bus driver will merely construct the Tx header based on
information passed from the switch driver.
Most of the packets are transmitted as control packets, but PTP packets in
Spectrum-2 and Spectrum-3 should be handled differently. The driver
transmits them as data packets, and the default VLAN tag (4095) is added if
the packet is not already tagged.
Extend PTP operations to store a boolean which indicates whether packets
should be transmitted as data packets. Set it for Spectrum-2 and
Spectrum-3 only. Extend mlxsw_txhdr_info to store fields which will be used
later to construct Tx header. Initialize such fields according to the new
boolean which is stored in PTP operations.
Note that for now, mlxsw_txhdr_info structure is initialized, but not used,
a next patch will use it.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/efcaacd4bedef524e840a0c29f96cebf2c4bc0e0.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlxsw_tx_info structure is used to store information that is needed to
process Tx completions when Tx time stamps are requested. A next patch
will move Tx header handling from spectrum.c to pci.c. For that, some
additional fields which are related to Tx should be passed to pci driver.
As preparation, create an extended structure, called mlxsw_txhdr_info,
and store mlxsw_tx_info inside. The new fields should not be added to
mlxsw_tx_info structure as it is stored in the SKB control block which is
of limited size.
The next patch will extend the new structure with some fields which are
needed in order to construct Tx header.
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Link: https://patch.msgid.link/93aed1961f046f79f46869bab37a3faa5027751d.1737044384.git.petrm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Shifting dest_attr->vport.vhca_id << 16 results in a promotion from an
unsigned 16 bit integer to a 32 bit signed integer, this is then sign
extended to a 64 bit unsigned long on 64 bitarchitectures. If vhca_id is
greater than 0x7fff then this leads to a sign extended result where all
the upper 32 bits of idx are set to 1. Fix this by casting vhca_id
to the same type as idx before performing the shift.
Fixes: 8e2e08a6d1 ("net/mlx5: fs, add support for dest vport HWS action")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Moshe Shemesh <moshe@nvidia.com>
Link: https://patch.msgid.link/20250116181700.96437-1-colin.i.king@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clear NBase-T link partner advertisement before calling
rtlgen_read_status() to avoid phy_resolve_aneg_linkmode() wrongly
setting speed and duplex.
This fixes bogus 2.5G/5G/10G link partner advertisement and thus
speed and duplex being set by phy_resolve_aneg_linkmode() due to stale
NBase-T lpa.
Fixes: 68d5cd09e8 ("net: phy: realtek: change order of calls in C22 read_status()")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
rtlgen_decode_physr() which sets master_slave_state isn't called in case
the link is down and other than rtlgen_read_status(),
rtl822x_c45_read_status() doesn't implicitely clear master_slave_state.
Avoid stale master_slave_state by always setting it to
MASTER_SLAVE_STATE_UNKNOWN in rtl822x_c45_read_status() in case the link
is down.
Fixes: 081c9c0265 ("net: phy: realtek: read duplex and gbit master from PHYSR register")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only read 1000Base-T link partner advertisement if autonegotiation has
completed and otherwise 1000Base-T link partner advertisement bits.
This fixes bogus 1000Base-T link partner advertisement after link goes
down (eg. by disconnecting the wire).
Fixes: 5cb409b396 ("net: phy: realtek: clear 1000Base-T link partner advertisement")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Convert stmmac to use phylink managed EEE support rather than delving
into phylib:
1. Move the stmmac_eee_init() calls out of mac_link_down() and
mac_link_up() methods into the new mac_{enable,disable}_lpi()
methods. We leave the calls to stmmac_set_eee_pls() in place as
these change bits which tell the EEE hardware when the link came
up or down, and is used for a separate hardware timer. However,
symmetrically conditionalise this with priv->dma_cap.eee.
2. Update the current LPI timer each time LPI is enabled - which we
need for software-timed LPI.
3. With phylink managed EEE, phylink manages the receive clock stop
configuration via phylink_config.eee_rx_clk_stop_enable. Set this
appropriately which makes the call to phy_eee_rx_clock_stop()
redundant.
4. From what I can work out, all supported interfaces support LPI
signalling on stmmac (there's no restriction implemented.) It
also appears to support LPI at all full duplex speeds at or over
100M. Set these capabilities.
5. The default timer appears to be derived from a module parameter.
Set this the same, although we keep code that reconfigures the
timer in stmmac_init_phy().
6. Remove the direct call to phy_support_eee(), which phylink will do
on the drivers behalf if phylink_config.eee_enabled_default is set.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAEG-0014QH-9O@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert lan743x to phylink managed EEE:
- Set the lpi_capabilties.
- Move the call to lan743x_mac_eee_enable() into the enable/disable
tx_lpi functions.
- Ensure that EEEEN is clear during probe.
- Move the setting of the LPI timer into mac_enable_tx_lpi().
- Move reading of LPI timer to phylink initialisation to set the
default timer value.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAEB-0014QB-4s@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add EEE support for mvpp2, using phylink's EEE implementation, which
means we just need to implement the two methods for LPI control, and
with the initial configuration. Only SGMII mode is supported, so only
100M and 1G speeds.
Disabling LPI requires clearing a single bit. Enabling LPI needs a full
configuration of several values, as the timer values are dependent on
the MAC operating speed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYAE0-0014Pz-R9@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert mvneta to use phylink's EEE implementation by implementing the
two LPI control methods, and adding the initial configuration and
capabilities.
Although disabling LPI requires clearing a single bit, for safety we
clear the manual mode and force bits to ensure that auto mode will be
used.
Enabling LPI needs a full configuration of several values, as the timer
values are dependent on the MAC operating speed, as per the original
code.
As Armada 388 states that EEE is only supported in "SGMII" modes, mark
this in lpi_interfaces. Testing with RGMII on the Clearfog platform
indicates that the receive path fails to detect LPI over RGMII.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/E1tYADv-0014Pt-NO@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
