Pull drm updates from Dave Airlie:
"There are two external interactions of note, the msm tree pull in some
opp tree, hopefully the opp tree arrives from the same git tree
however it normally does.
There is also a new cgroup controller for device memory, that is used
by drm, so is merging through my tree. This will hopefully help open
up gpu cgroup usage a bit more and move us forward.
There is a new accelerator driver for the AMD XDNA Ryzen AI NPUs.
Then the usual xe/amdgpu/i915/msm leaders and lots of changes and
refactors across the board:
core:
- device memory cgroup controller added
- Remove driver date from drm_driver
- Add drm_printer based hex dumper
- drm memory stats docs update
- scheduler documentation improvements
new driver:
- amdxdna - Ryzen AI NPU support
connector:
- add a mutex to protect ELD
- make connector setup two-step
panels:
- Introduce backlight quirks infrastructure
- New panels: KDB KD116N2130B12, Tianma TM070JDHG34-00,
- Multi-Inno Technology MI1010Z1T-1CP11
bridge:
- ti-sn65dsi83: Add ti,lvds-vod-swing optional properties
- Provide default implementation of atomic_check for HDMI bridges
- it605: HDCP improvements, MCCS Support
xe:
- make OA buffer size configurable
- GuC capture fixes
- add ufence and g2h flushes
- restore system memory GGTT mappings
- ioctl fixes
- SRIOV PF scheduling priority
- allow fault injection
- lots of improvements/refactors
- Enable GuC's WA_DUAL_QUEUE for newer platforms
- IRQ related fixes and improvements
i915:
- More accurate engine busyness metrics with GuC submission
- Ensure partial BO segment offset never exceeds allowed max
- Flush GuC CT receive tasklet during reset preparation
- Some DG2 refactor to fix DG2 bugs when operating with certain CPUs
- Fix DG1 power gate sequence
- Enabling uncompressed 128b/132b UHBR SST
- Handle hdmi connector init failures, and no HDMI/DP cases
- More robust engine resets on Haswell and older
i915/xe display:
- HDCP fixes for Xe3Lpd
- New GSC FW ARL-H/ARL-U
- support 3 VDSC engines 12 slices
- MBUS joining sanitisation
- reconcile i915/xe display power mgmt
- Xe3Lpd fixes
- UHBR rates for Thunderbolt
amdgpu:
- DRM panic support
- track BO memory stats at runtime
- Fix max surface handling in DC
- Cleaner shader support for gfx10.3 dGPUs
- fix drm buddy trim handling
- SDMA engine reset updates
- Fix doorbell ttm cleanup
- RAS updates
- ISP updates
- SDMA queue reset support
- Rework DPM powergating interfaces
- Documentation updates and cleanups
- DCN 3.5 updates
- Use a pm notifier to more gracefully handle VRAM eviction on
suspend or hibernate
- Add debugfs interfaces for forcing scheduling to specific engine
instances
- GG 9.5 updates
- IH 4.4 updates
- Make missing optional firmware less noisy
- PSP 13.x updates
- SMU 13.x updates
- VCN 5.x updates
- JPEG 5.x updates
- GC 12.x updates
- DC FAMS updates
amdkfd:
- GG 9.5 updates
- Logging improvements
- Shader debugger fixes
- Trap handler cleanup
- Cleanup includes
- Eviction fence wq fix
msm:
- MDSS:
- properly described UBWC registers
- added SM6150 (aka QCS615) support
- DPU:
- added SM6150 (aka QCS615) support
- enabled wide planes if virtual planes are enabled (by using two
SSPPs for a single plane)
- added CWB hardware blocks support
- DSI:
- added SM6150 (aka QCS615) support
- GPU:
- Print GMU core fw version
- GMU bandwidth voting for a740 and a750
- Expose uche trap base via uapi
- UAPI error reporting
rcar-du:
- Add r8a779h0 Support
ivpu:
- Fix qemu crash when using passthrough
nouveau:
- expose GSP-RM logging buffers via debugfs
panfrost:
- Add MT8188 Mali-G57 MC3 support
rockchip:
- Gamma LUT support
hisilicon:
- new HIBMC support
virtio-gpu:
- convert to helpers
- add prime support for scanout buffers
v3d:
- Add DRM_IOCTL_V3D_PERFMON_SET_GLOBAL
vc4:
- Add support for BCM2712
vkms:
- line-per-line compositing algorithm to improve performance
zynqmp:
- Add DP audio support
mediatek:
- dp: Add sdp path reset
- dp: Support flexible length of DP calibration data
etnaviv:
- add fdinfo memory support
- add explicit reset handling"
* tag 'drm-next-2025-01-17' of https://gitlab.freedesktop.org/drm/kernel: (1070 commits)
drm/bridge: fix documentation for the hdmi_audio_prepare() callback
doc/cgroup: Fix title underline length
drm/doc: Include new drm-compute documentation
cgroup/dmem: Fix parameters documentation
cgroup/dmem: Select PAGE_COUNTER
kernel/cgroup: Remove the unused variable climit
drm/display: hdmi: Do not read EDID on disconnected connectors
drm/tests: hdmi: Add connector disablement test
drm/connector: hdmi: Do atomic check when necessary
drm/amd/display: 3.2.316
drm/amd/display: avoid reset DTBCLK at clock init
drm/amd/display: improve dpia pre-train
drm/amd/display: Apply DML21 Patches
drm/amd/display: Use HW lock mgr for PSR1
drm/amd/display: Revised for Replay Pseudo vblank control
drm/amd/display: Add a new flag for replay low hz
drm/amd/display: Remove unused read_ono_state function from Hwss module
drm/amd/display: Do not elevate mem_type change to full update
drm/amd/display: Do not wait for PSR disable on vbl enable
drm/amd/display: Remove unnecessary eDP power down
...
Enable the cleaner shader for GFX10.3.2/10.3.4/10.3.5 GPUs to provide
data isolation between GPU workloads. The cleaner shader is responsible
for clearing the Local Data Store (LDS), Vector General Purpose
Registers (VGPRs), and Scalar General Purpose Registers (SGPRs), which
helps prevent data leakage and ensures accurate computation results.
This update extends cleaner shader support to GFX10.3.2/10.3.4/10.3.5
GPUs, previously available for GFX10.3.0. It enhances security by
clearing GPU memory between processes and maintains a consistent GPU
state across KGD and KFD workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The adev->ip_blocks array is not indexed by AMD_IP_BLOCK_TYPE_xxx,
instead we should call amdgpu_device_ip_get_ip_block() to get the
corresponding IP block oject.
Fix some checkpatch issues (Alex)
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The RB bitmap width per SA may be 0x1 for some ASICs.
Use the actual bitmap of SA instead of 0x3 to determine
the active RB bitmap.
Signed-off-by: Tim Huang <tim.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The "mask" and "val" variables are type u64. The problem is that the
BIT() macros are type unsigned long which is just 32 bits on 32bit
systems.
It's unlikely that people will be using this driver on 32bit kernels
and even if they did we only use the lower AMDGPU_MAX_SDMA_INSTANCES (16)
bits. So this bug does not affect anything in real life.
Still, for correctness sake, u64 bit masks should use BIT_ULL().
Fixes: d2e3961ae3 ("drm/amdgpu: add amdgpu_sdma_sched_mask debugfs")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/d39a9325-87a4-4543-b6ec-1c61fca3a6fc@stanley.mountain
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
container_of cannot return NULL, so it is unnecessary to check for
NULL after gem_to_amdgpu_bo, which is just a container_of call
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver can only request one time for the power safe mode instead of
polling and disabling the power feature each time prior to program the
GFX clock gating control registers. This update will reduce the latency
on the GFX clock gating entry.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This commit adds the cleaner shader microcode for GFX10.3.0 GPUs. The
cleaner shader is a piece of GPU code that is used to clear or
initialize certain GPU resources, such as Local Data Share (LDS), Vector
General Purpose Registers (VGPRs), and Scalar General Purpose Registers
(SGPRs).
Clearing these resources is important for ensuring data isolation
between different workloads running on the GPU. Without the cleaner
shader, residual data from a previous workload could potentially be
accessed by a subsequent workload, leading to data leaks and incorrect
computation results.
The cleaner shader microcode is represented as an array of 32-bit words
(`gfx_10_3_0_cleaner_shader_hex`). This array is the binary
representation of the cleaner shader code, which is written in a
low-level GPU instruction set.
When the cleaner shader feature is enabled, the AMDGPU driver loads this
array into a specific location in the GPU memory. The GPU then reads
this memory location to fetch and execute the cleaner shader
instructions.
The cleaner shader is executed automatically by the GPU at the end of
each workload, before the next workload starts. This ensures that all
GPU resources are in a clean state before the start of each workload.
This addition is part of the cleaner shader feature implementation. The
cleaner shader feature helps resource utilization by cleaning up GPU
resources after they are used. It also enhances security and reliability
by preventing data leaks between workloads.
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It ensures that appropriate error codes are returned when an error
condition is detected
Fixes the below;
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2849 amdgpu_ras_add_bad_pages() warn: missing error code here? 'amdgpu_umc_pages_in_a_row()' failed.
drivers/gpu/drm/amd/amdgpu/amdgpu_ras.c:2884 amdgpu_ras_add_bad_pages() warn: missing error code here? 'amdgpu_ras_mca2pa()' failed.
v2: s/-EIO/-EINVAL, retained the use of -EINVAL from
amdgpu_umc_pages_in_a_row & and amdgpu_ras_mca2pa_by_idx, when the
RAS context is not initialized or the convert_ras_err_addr function is
unavailable. (Thomas)
V3: Returning 0 as the absence of eh_data is acceptable. (Tao)
Fixes: a8d133e625 ("drm/amdgpu: parse legacy RAS bad page mixed with new data in various NPS modes")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: YiPeng Chai <yipeng.chai@amd.com>
Cc: Tao Zhou <tao.zhou1@amd.com>
Cc: Hawking Zhang <Hawking.Zhang@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Users might switch to ROCM build does not include MEC SJT FW and driver
needs to consider this case.w
Signed-off-by: yfeng1 <yfeng1@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Before, every time fdinfo is queried we try to lock all the BOs in the
VM and calculate memory usage from scratch. This works okay if the
fdinfo is rarely read and the VMs don't have a ton of BOs. If either of
these conditions is not true, we get a massive performance hit.
In this new revision, we track the BOs as they change states. This way
when the fdinfo is queried we only need to take the status lock and copy
out the usage stats with minimal impact to the runtime performance. With
this new approach however, we would no longer be able to track active
buffers.
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241219151411.1150-6-Yunxiang.Li@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
Since 2320c9e6a7 ("drm/sched: memset() 'job' in drm_sched_job_init()")
accessing job->base.sched can produce unexpected results as the initialisation
of (*job)->base.sched done in amdgpu_job_alloc is overwritten by the
memset.
This commit fixes an issue when a CS would fail validation and would
be rejected after job->num_ibs is incremented. In this case,
amdgpu_ib_free(ring->adev, ...) will be called, which would crash the
machine because the ring value is bogus.
To fix this, pass a NULL pointer to amdgpu_ib_free(): we can do this
because the device is actually not used in this function.
The next commit will remove the ring argument completely.
Fixes: 2320c9e6a7 ("drm/sched: memset() 'job' in drm_sched_job_init()")
Signed-off-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ae520cb12)
If IH primary ring and KFD ih fifo overflows, we may miss CP, SDMA
interrupts and cause application soft hang. Show warning message with
ring name if overflow happens.
Add function to get ih ring name to avoid duplicating it. To keep
warning message consistent between GPU generations, change all
*_ih.c except ASICs older than Vega which has only one ih ring.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
After GPU page fault, there are lots of page fault interrupts generated
at short period even with CAM filter enabled because the fault address
is different. Each page fault copy to KFD ih fifo to send event to user
space by KFD interrupt worker, this could cause KFD ih fifo overflow
while other processes generate events at same time.
KFD process is aborted after GPU page fault, we only need one GPU page
fault interrupt sent to KFD ih fifo to send memory exception event to
user space.
Incease KFD ih fifo size to 2 times of IH primary ring size, to handle
the burst events case.
This patch handle the gfx v9 path, cover retry on/off and CAM filter
on/off cases.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This partially reverts commit 194eb174cb.
This commit introduced a new state variable into adev without even
remotely worrying about CPU barriers.
Since we already have the amdgpu_in_reset() function exactly for this
use case partially revert that.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The sdma context empty interrupt is dropped in amdgpu_irq_dispatch
as unregistered interrupt src_id 243, this interrupt accounts to 1/3 of
total interrupts and causes IH primary ring overflow when running
stressful benchmark application. Disable this interrupt has no side
effect found.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The use of 1 << i in scheduler mask calculations can result in an
unintentional integer overflow due to the expression being
evaluated as a 32-bit signed integer.
This patch replaces 1 << i with 1ULL << i to ensure the operation
is performed as a 64-bit unsigned integer, preventing overflow
Discovered in coverity scan, CID 1636393, 1636175, 1636007, 1635853
Fixes: c5c63d9cb5 ("drm/amdgpu: add amdgpu_gfx_sched_mask and amdgpu_compute_sched_mask debugfs")
Signed-off-by: Karol Przybylski <karprzy7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
