- Remove CONFIG_PAHOLE_HAS_BTF_TAG from required config list
- Document ext_idle.c as the built-in idle CPU selection policy
- Add descriptions for example schedulers in tools/sched_ext/
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Mention the scheduling class precedence of fair and sched_ext to
clear up how sched_ext partial mode works.
Signed-off-by: Christian Loehle <christian.loehle@arm.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Pull nfsd fixes from Chuck Lever:
- Restore previous nfsd thread count reporting behavior
- Fix credential reference leaks in the NFSD netlink admin protocol
* tag 'nfsd-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: report the requested maximum number of threads instead of number running
nfsd: Fix cred ref leak in nfsd_nl_listener_set_doit().
nfsd: Fix cred ref leak in nfsd_nl_threads_set_doit().
Pull kvm fixes from Paolo Bonzini:
"Arm:
- Make sure we don't leak any S1POE state from guest to guest when
the feature is supported on the HW, but not enabled on the host
- Propagate the ID registers from the host into non-protected VMs
managed by pKVM, ensuring that the guest sees the intended feature
set
- Drop double kern_hyp_va() from unpin_host_sve_state(), which could
bite us if we were to change kern_hyp_va() to not being idempotent
- Don't leak stage-2 mappings in protected mode
- Correctly align the faulting address when dealing with single page
stage-2 mappings for PAGE_SIZE > 4kB
- Fix detection of virtualisation-capable GICv5 IRS, due to the
maintainer being obviously fat fingered... [his words, not mine]
- Remove duplication of code retrieving the ASID for the purpose of
S1 PT handling
- Fix slightly abusive const-ification in vgic_set_kvm_info()
Generic:
- Remove internal Kconfigs that are now set on all architectures
- Remove per-architecture code to enable KVM_CAP_SYNC_MMU, all
architectures finally enable it in Linux 7.0"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: always define KVM_CAP_SYNC_MMU
KVM: remove CONFIG_KVM_GENERIC_MMU_NOTIFIER
KVM: arm64: Deduplicate ASID retrieval code
irqchip/gic-v5: Fix inversion of IRS_IDR0.virt flag
KVM: arm64: Revert accidental drop of kvm_uninit_stage2_mmu() for non-NV VMs
KVM: arm64: Fix protected mode handling of pages larger than 4kB
KVM: arm64: vgic: Handle const qualifier from gic_kvm_info allocation type
KVM: arm64: Remove redundant kern_hyp_va() in unpin_host_sve_state()
KVM: arm64: Fix ID register initialization for non-protected pKVM guests
KVM: arm64: Optimise away S1POE handling when not supported by host
KVM: arm64: Hide S1POE from guests when not supported by the host
Pull spi fixes from Mark Brown:
"One fix for the stm32 driver which got broken for DMA chaining cases,
plus a removal of some straggling bindings for the Bikal SoC which has
been pulled out of the kernel"
* tag 'spi-fix-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: fix missing pointer assignment in case of dma chaining
spi: dt-bindings: snps,dw-abp-ssi: Remove unused bindings
Pull regulator fixes from Mark Brown:
"A small pile of fixes, none of which are super major - the code fixes
are improved error handling and fixing a leak of a device node.
We also have a typo fix and an improvement to make the binding example
for mt6359 more directly usable"
* tag 'regulator-fix-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: Kconfig: fix a typo
regulator: bq257xx: Fix device node reference leak in bq257xx_reg_dt_parse_gpio()
regulator: fp9931: Fix PM runtime reference leak in fp9931_hwmon_read()
regulator: tps65185: check devm_kzalloc() result in probe
regulator: dt-bindings: mt6359: make regulator names unique
KVM_CAP_SYNC_MMU is provided by KVM's MMU notifiers, which are now always
available. Move the definition from individual architectures to common
code.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
The current netlink and /proc interfaces deviate from their traditional
values when dynamic threading is enabled, and there is currently no way
to know what the current setting is. This patch brings the reporting
back in line with traditional behavior.
Make these interfaces report the requested maximum number of threads
instead of the number currently running. Also, update documentation and
comments to reflect that this value represents a maximum and not the
number currently running.
Fixes: d8316b837c ("nfsd: add controls to set the minimum number of threads per pool")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Currently, ops.dequeue() is only invoked when the sched_ext core knows
that a task resides in BPF-managed data structures, which causes it to
miss scheduling property change events. In addition, ops.dequeue()
callbacks are completely skipped when tasks are dispatched to non-local
DSQs from ops.select_cpu(). As a result, BPF schedulers cannot reliably
track task state.
Fix this by guaranteeing that each task entering the BPF scheduler's
custody triggers exactly one ops.dequeue() call when it leaves that
custody, whether the exit is due to a dispatch (regular or via a core
scheduling pick) or to a scheduling property change (e.g.
sched_setaffinity(), sched_setscheduler(), set_user_nice(), NUMA
balancing, etc.).
BPF scheduler custody concept: a task is considered to be in the BPF
scheduler's custody when the scheduler is responsible for managing its
lifecycle. This includes tasks dispatched to user-created DSQs or stored
in the BPF scheduler's internal data structures from ops.enqueue().
Custody ends when the task is dispatched to a terminal DSQ (such as the
local DSQ or %SCX_DSQ_GLOBAL), selected by core scheduling, or removed
due to a property change.
Tasks directly dispatched to terminal DSQs bypass the BPF scheduler
entirely and are never in its custody. Terminal DSQs include:
- Local DSQs (%SCX_DSQ_LOCAL or %SCX_DSQ_LOCAL_ON): per-CPU queues
where tasks go directly to execution.
- Global DSQ (%SCX_DSQ_GLOBAL): the built-in fallback queue where the
BPF scheduler is considered "done" with the task.
As a result, ops.dequeue() is not invoked for tasks directly dispatched
to terminal DSQs.
To identify dequeues triggered by scheduling property changes, introduce
the new ops.dequeue() flag %SCX_DEQ_SCHED_CHANGE: when this flag is set,
the dequeue was caused by a scheduling property change.
New ops.dequeue() semantics:
- ops.dequeue() is invoked exactly once when the task leaves the BPF
scheduler's custody, in one of the following cases:
a) regular dispatch: a task dispatched to a user DSQ or stored in
internal BPF data structures is moved to a terminal DSQ
(ops.dequeue() called without any special flags set),
b) core scheduling dispatch: core-sched picks task before dispatch
(ops.dequeue() called with %SCX_DEQ_CORE_SCHED_EXEC flag set),
c) property change: task properties modified before dispatch,
(ops.dequeue() called with %SCX_DEQ_SCHED_CHANGE flag set).
This allows BPF schedulers to:
- reliably track task ownership and lifecycle,
- maintain accurate accounting of managed tasks,
- update internal state when tasks change properties.
Cc: Tejun Heo <tj@kernel.org>
Cc: Emil Tsalapatis <emil@etsalapatis.com>
Cc: Kuba Piecuch <jpiecuch@google.com>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Pull RTC updates from Alexandre Belloni:
- loongson: Loongson-2K0300 support
- s35390a: nvmem support
- zynqmp: rework calibration
* tag 'rtc-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: ds1390: fix number of bytes read from RTC
rtc: class: Remove duplicate check for alarm
rtc: optee: simplify OP-TEE context match
rtc: interface: Alarm race handling should not discard preceding error
rtc: s35390a: implement nvmem support
rtc: loongson: Add Loongson-2K0300 support
dt-bindings: rtc: loongson: Document Loongson-2K0300 compatible
dt-bindings: rtc: loongson: Correct Loongson-1C interrupts property
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2N support
dt-bindings: rtc: cpcap: convert to schema
rtc: zynqmp: use dynamic max and min offset ranges
rtc: zynqmp: rework set_offset
rtc: zynqmp: rework read_offset
rtc: zynqmp: check calibration max value
rtc: zynqmp: correct frequency value
rtc: amlogic-a4: Remove IRQF_ONESHOT
rtc: pcf8563: use correct of_node for output clock
rtc: max31335: use correct CONFIG symbol in IS_REACHABLE()
rtc: nvvrs: Add ARCH_TEGRA to the NV VRS RTC driver
The current debug documentation does not mention that logs are printed
to stdout unless DEBUG_FILE is set. It also doesn't mention that
Coccinelle cannot overwrite debug files.
Document this behaviour in the examples and reference it in the
debugging section.
Signed-off-by: Benjamin Philip <benjamin.philip495@gmail.com>
Signed-off-by: Julia Lawall <julia.lawall@inria.fr>
Pull more i2c updates from Wolfram Sang:
"Designware:
- refactor the transfer path to support I2C_M_STOP
- handle pm runtime by using the active auto try macros
- handle controllers lacking explicit START and STOP conditions
- general cleanups
Other i2c drivers:
- qualcomm: add support for qcs8300-cci
- amd8111: general cleanups
- cp2112: add DT bindings"
* tag 'i2c-for-7.0-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
dt-bindings: i2c: Add CP2112 HID USB to SMBus Bridge
i2c: amd8111: switch to devm_ functions
i2c: amd8111: Remove spaces in MODULE_* macros
i2c: designware-platdrv: fix cleanup on probe failure
i2c: designware-platdrv: simplify reset control
dt-bindings: i2c: qcom-cci: Document qcs8300 compatible
i2c: designware: Remove dead code in AMD ISP case
i2c: designware: Support of controller with IC_EMPTYFIFO_HOLD_MASTER disabled
i2c: designware: Use runtime PM macro for auto-cleanup
i2c: designware: Implement I2C_M_STOP support
Pull sound fixes from Takashi Iwai:
"Here are a bunch of updates, but there should be no big surprises;
mostly device-specific quirks and fix-ups or non-code changes:
- Quirks for ASoC AMD, HD-audio and USB-audio
- Fixes in ASoC fsl, rockchip, renesas, aw codecs
- Fixes for USB-audio packet handling in the implicit feedback mode
- Updates of SPDX license IDs in some files"
* tag 'sound-fix-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (28 commits)
ASoC: rockchip: i2s-tdm: Use param rate if not provided by set_sysclk
ALSA: hda/hdmi: Add quirk for TUXEDO IBS14G6
ASoC: dt-bindings: asahi-kasei,ak5558: Fix the supply names
ASoC: dt-bindings: asahi-kasei,ak4458: Fix the supply names
ASoC: dt-bindings: asahi-kasei,ak4458: set unevaluatedProperties:false
ASoC: amd: amd_sdw: add machine driver quirk for Lenovo models
ASoC: amd: acp: Add ACP7.0 match entries for Realtek parts
ALSA: echoaudio: Add SPDX ids to some files
ALSA: isa: Add SPDX id lines to some files
ALSA: core: Add SPDX license id to files
ASoC: tas2783A: add explicit port prepare handling
ASoC: renesas: rz-ssi: Fix playback and capture
ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14 UX3405MA
ALSA: hda/conexant: Fix headphone jack handling on Acer Swift SF314
ASoC: qcom: sm8250: Add quinary MI2S support
ASoC: amd: yc: Add DMI quirk for ASUS Vivobook Pro 15X M6501RR
ALSA: usb-audio: Avoid potentially repeated XRUN error messages
ALSA: usb-audio: Add sanity check for OOB writes at silencing
ALSA: usb-audio: Optimize the copy of packet sizes for implicit fb handling
ALSA: usb-audio: Update the number of packets properly at receiving
...
Pull networking fixes from Jakub Kicinski:
"Including fixes from Netfilter.
Current release - new code bugs:
- net: fix backlog_unlock_irq_restore() vs CONFIG_PREEMPT_RT
- eth: mlx5e: XSK, Fix unintended ICOSQ change
- phy_port: correctly recompute the port's linkmodes
- vsock: prevent child netns mode switch from local to global
- couple of kconfig fixes for new symbols
Previous releases - regressions:
- nfc: nci: fix false-positive parameter validation for packet data
- net: do not delay zero-copy skbs in skb_attempt_defer_free()
Previous releases - always broken:
- mctp: ensure our nlmsg responses to user space are zero-initialised
- ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
- fixes for ICMP rate limiting
Misc:
- intel: fix PCI device ID conflict between i40e and ipw2200"
* tag 'net-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (85 commits)
net: nfc: nci: Fix parameter validation for packet data
net/mlx5e: Use unsigned for mlx5e_get_max_num_channels
net/mlx5e: Fix deadlocks between devlink and netdev instance locks
net/mlx5e: MACsec, add ASO poll loop in macsec_aso_set_arm_event
net/mlx5: Fix misidentification of write combining CQE during poll loop
net/mlx5e: Fix misidentification of ASO CQE during poll loop
net/mlx5: Fix multiport device check over light SFs
bonding: alb: fix UAF in rlb_arp_recv during bond up/down
bnge: fix reserving resources from FW
eth: fbnic: Advertise supported XDP features.
rds: tcp: fix uninit-value in __inet_bind
net/rds: Fix NULL pointer dereference in rds_tcp_accept_one
octeontx2-af: Fix default entries mcam entry action
net/mlx5e: XSK, Fix unintended ICOSQ change
ipv6: icmp: icmpv6_xrlim_allow() optimization if net.ipv6.icmp.ratelimit is zero
ipv4: icmp: icmpv4_xrlim_allow() optimization if net.ipv4.icmp_ratelimit is zero
ipv6: icmp: remove obsolete code in icmpv6_xrlim_allow()
inet: move icmp_global_{credit,stamp} to a separate cache line
icmp: prevent possible overflow in icmp_global_allow()
selftests/net: packetdrill: add ipv4-mapped-ipv6 tests
...
Following part was needed before the blamed commit, because
inet_getpeer_v6() second argument was the prefix.
/* Give more bandwidth to wider prefixes. */
if (rt->rt6i_dst.plen < 128)
tmo >>= ((128 - rt->rt6i_dst.plen)>>5);
Now inet_getpeer_v6() retrieves hosts, we need to remove
@tmo adjustement or wider prefixes likes /24 allow 8x
more ICMP to be sent for a given ratelimit.
As we had this issue for a while, this patch changes net.ipv6.icmp.ratelimit
default value from 1000ms to 100ms to avoid potential regressions.
Also add a READ_ONCE() when reading net->ipv6.sysctl.icmpv6_time.
Fixes: fd0273d793 ("ipv6: Remove external dependency on rt6i_dst and rt6i_src")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Cc: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20260216142832.3834174-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes on top of the power management updates merged
recently in cpuidle governors, in the Intel RAPL power capping driver
and in the wake IRQ management code:
- Fix the handling of package-scope MSRs in the intel_rapl power
capping driver when called from the PMU subsystem and make it add
all package CPUs to the PMU cpumask to allow tools to read RAPL
events from any CPU in the package (Kuppuswamy Satharayananyan)
- Rework the invalid version check in the intel_rapl_tpmi power
capping driver to account for the fact that on partitioned systems,
multiple TPMI instances may exist per package, but RAPL registers
are only valid on one instance (Kuppuswamy Satharayananyan)
- Describe the new intel_idle.table command line option in the
admin-guide intel_idle documentation (Artem Bityutskiy)
- Fix a crash in the ladder cpuidle governor on systems with only one
(polling) idle state available by making the cpuidle core bypass
the governor in those cases and adjust the other existing governors
to that change (Aboorva Devarajan, Christian Loehle)
- Update kerneldoc comments for wake IRQ management functions that
have not been matching the code (Wang Jiayue)"
* tag 'pm-7.0-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: menu: Remove single state handling
cpuidle: teo: Remove single state handling
cpuidle: haltpoll: Remove single state handling
cpuidle: Skip governor when only one idle state is available
powercap: intel_rapl_tpmi: Remove FW_BUG from invalid version check
PM: sleep: wakeirq: Update outdated documentation comments
Documentation: PM: Document intel_idle.table command line option
powercap: intel_rapl: Expose all package CPUs in PMU cpumask
powercap: intel_rapl: Remove incorrect CPU check in PMU context
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix the yaml binding document.
Fixes: 829d78e3ea ("ASoC: dt-bindings: ak5558: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-4-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In the original txt format binding document ak4458.txt, the supply names
are 'AVDD-supply', 'DVDD-supply', and they are also used in driver. But in
the commit converting to yaml format, they are changed to 'avdd-supply',
'dvdd-supply'. After search all the dts file, these names 'AVDD-supply',
'DVDD-supply', 'avdd-supply', 'dvdd-supply' are not used in any dts
file. So it is safe to fix this yaml binding document.
Fixes: 009e83b591 ("ASoC: dt-bindings: ak4458: Convert to dtschema")
Cc: stable@vger.kernel.org
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Link: https://patch.msgid.link/20260212021829.3244736-3-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add documentation for the vsock per-namespace sysctls (`ns_mode` and
`child_ns_mode`) to Documentation/admin-guide/sysctl/net.rst.
These sysctls were introduced by commit eafb64f40c ("vsock: add
netns to vsock core").
Document the two namespace modes (`global` and `local`), the
inheritance behavior of `child_ns_mode`, and the restriction preventing
local namespaces from setting `child_ns_mode` to `global`.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://patch.msgid.link/20260216163147.236844-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull overlayfs update from Amir Goldstein:
"Relax the semantics of uuid=off to cater to a use case of overlayfs
lower layers on btrfs clones, whose UUID are ephemeral and an upper
layer on a different filesystem"
* tag 'ovl-update-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs:
ovl: relax requirement for uuid=off,index=on
Pull dmaengine updates from Vinod Koul:
"Core:
- Add Frank Li as susbstem reviewer to help with reviews
New Support:
- Mediatek support for Dimensity 6300 and 9200 controller
- Qualcomm Kaanapali and Glymur GPI DMA engine
- Synopsis DW AXI Agilex5
- Renesas RZ/V2N SoC
- Atmel microchip lan9691-dma
- Tegra ADMA tegra264
Updates:
- sg_nents_for_dma() helper use in subsystem
- pm_runtime_mark_last_busy() redundant call update for subsystem
- Residue support for xilinx AXIDMA driver
- Intel Max SGL Size Support and capabilities for DSA3.0
- AXI dma larger than 32bits address support"
* tag 'dmaengine-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (64 commits)
dmaengine: add Frank Li as reviewer
dt-bindings: dma: qcom,gpi: Update max interrupts lines to 16
dmaengine: fsl-edma: don't explicitly disable clocks in .remove()
dmaengine: xilinx: xdma: use sg_nents_for_dma() helper
dmaengine: sh: use sg_nents_for_dma() helper
dmaengine: sa11x0: use sg_nents_for_dma() helper
dmaengine: qcom: bam_dma: use sg_nents_for_dma() helper
dmaengine: qcom: adm: use sg_nents_for_dma() helper
dmaengine: pxa-dma: use sg_nents_for_dma() helper
dmaengine: lgm: use sg_nents_for_dma() helper
dmaengine: k3dma: use sg_nents_for_dma() helper
dmaengine: dw-axi-dmac: use sg_nents_for_dma() helper
dmaengine: bcm2835-dma: use sg_nents_for_dma() helper
dmaengine: axi-dmac: use sg_nents_for_dma() helper
dmaengine: altera-msgdma: use sg_nents_for_dma() helper
scatterlist: introduce sg_nents_for_dma() helper
dmaengine: idxd: Add Max SGL Size Support for DSA3.0
dmaengine: idxd: Expose DSA3.0 capabilities through sysfs
dmaengine: sh: rz-dmac: Make channel irq local
dmaengine: pl08x: Fix comment stating the difference between PL080 and PL081
...
Pull soundwire updates from Vinod Koul:
- support for Qualcomm v2.2.0 controllers
- bus method updates for .probe(), .remove() and .shutdown()
and remove function return value updates
- Avell B.ON dmi-quirks mapping
- mark cs42l45 codec as wake capable
* tag 'soundwire-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: intel_ace2x: add SND_HDA_CORE dependency
dt-bindings: soundwire: qcom: Add SoundWire v2.2.0 compatible
soundwire: Use bus methods for .probe(), .remove() and .shutdown()
soundwire: Make remove function return no value
soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)
soundwire: qcom: Use guard to avoid mixing cleanup and goto
soundwire: intel_auxdevice: add cs42l45 codec to wake_capable_list
Pull USB / Thunderbolt updates from Greg KH:
"Here is the "big" set of USB and Thunderbolt driver updates for
7.0-rc1. Overall more lines were removed than added, thanks to
dropping the obsolete isp1362 USB host controller driver, always a
nice change.
Other than that, nothing major happening here, highlights are:
- lots of dwc3 driver updates and new hardware support added
- usb gadget function driver updates
- usb phy driver updates
- typec driver updates and additions
- USB rust binding updates for syntax and formatting changes
- more usb serial device ids added
- other smaller USB core and driver updates and additions
All of these have been in linux-next for a long time, with no reported
problems"
* tag 'usb-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (77 commits)
usb: typec: ucsi: Add Thunderbolt alternate mode support
usb: typec: hd3ss3220: Check if regulator needs to be switched
usb: phy: tegra: parametrize PORTSC1 register offset
usb: phy: tegra: parametrize HSIC PTS value
usb: phy: tegra: return error value from utmi_wait_register
usb: phy: tegra: cosmetic fixes
dt-bindings: usb: renesas,usbhs: Add RZ/G3E SoC support
usb: dwc2: fix resume failure if dr_mode is host
usb: cdns3: fix role switching during resume
usb: dwc3: gadget: Move vbus draw to workqueue context
USB: serial: option: add Telit FN920C04 RNDIS compositions
usb: dwc3: Log dwc3 address in traces
usb: gadget: tegra-xudc: Add handling for BLCG_COREPLL_PWRDN
usb: phy: tegra: add HSIC support
usb: phy: tegra: use phy type directly
usb: typec: ucsi: Enforce mode selection for cros_ec_ucsi
usb: typec: ucsi: Support mode selection to activate altmodes
usb: typec: Introduce mode_selection bit
usb: typec: Implement mode selection
usb: typec: Expose alternate mode priority via sysfs
...
Pull tty / serial driver updates from Greg KH:
"Here is the small amount of tty and serial driver updates for 7.0-rc1.
Nothing major in here at all, just some driver updates and minor
tweaks and cleanups including:
- sh-sci serial driver updates
- 8250 driver updates
- attempt to make the tty ports have their own workqueue, but was
reverted after testing found it to have problems on some platforms.
This will probably come back for 7.1 after it has been reworked and
resubmitted
- other tiny tty driver changes
All of these have been in linux-next for a while with no reported
problems"
* tag 'tty-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (49 commits)
Revert "tty: tty_port: add workqueue to flip TTY buffer"
tty: tty_port: add workqueue to flip TTY buffer
serial: 8250_pci: Remove custom deprecated baud setting routine
serial: 8250_omap: Remove custom deprecated baud setting routine
dt-bindings: serial: renesas,scif: Document RZ/G3L SoC
serial: 8250: omap: set out-of-band wakeup if wakeup pinctrl exists
tty: hvc-iucv: Remove KMSG_COMPONENT macro
dt-bindings: serial: google,goldfish-tty: Convert to DT schema
dt-bindings: serial: sh-sci: Fold single-entry compatibles into enum
serial: 8250: 8250_omap.c: Clear DMA RX running status only after DMA termination is done
serial: 8250: 8250_omap.c: Add support for handling UART error conditions
serial: SH_SCI: improve "DMA support" prompt
serial: Kconfig: fix ordering of entries for menu display
serial: 8250: fix ordering of entries for menu display
serial: imx: change SERIAL_IMX_CONSOLE to bool
8250_men_mcb: drop unneeded MODULE_ALIAS
serial: men_z135_uart: drop unneeded MODULE_ALIAS
dt-bindings: serial: renesas,rsci: Document RZ/V2H(P) and RZ/V2N SoCs
serial: rsci: Convert to FIELD_MODIFY()
dt-bindings: serial: 8250: add SpacemiT K3 UART compatible
...
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystem changes for 7.0-rc1. Lots of little things in here,
including:
- Loads of iio driver changes and updates and additions
- gpib driver updates
- interconnect driver updates
- i3c driver updates
- hwtracing (coresight and intel) driver updates
- deletion of the obsolete mwave driver
- binder driver updates (rust and c versions)
- mhi driver updates (causing a merge conflict, see below)
- mei driver updates
- fsi driver updates
- eeprom driver updates
- lots of other small char and misc driver updates and cleanups
All of these have been in linux-next for a while, with no reported
issues"
* tag 'char-misc-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (297 commits)
mux: mmio: fix regmap leak on probe failure
rust_binder: return p from rust_binder_transaction_target_node()
drivers: android: binder: Update ARef imports from sync::aref
rust_binder: fix needless borrow in context.rs
iio: magn: mmc5633: Fix Kconfig for combination of I3C as module and driver builtin
iio: sca3000: Fix a resource leak in sca3000_probe()
iio: proximity: rfd77402: Add interrupt handling support
iio: proximity: rfd77402: Document device private data structure
iio: proximity: rfd77402: Use devm-managed mutex initialization
iio: proximity: rfd77402: Use kernel helper for result polling
iio: proximity: rfd77402: Align polling timeout with datasheet
iio: cros_ec: Allow enabling/disabling calibration mode
iio: frequency: ad9523: correct kernel-doc bad line warning
iio: buffer: buffer_impl.h: fix kernel-doc warnings
iio: gyro: itg3200: Fix unchecked return value in read_raw
MAINTAINERS: add entry for ADE9000 driver
iio: accel: sca3000: remove unused last_timestamp field
iio: accel: adxl372: remove unused int2_bitmask field
iio: adc: ad7766: Use iio_trigger_generic_data_rdy_poll()
iio: magnetometer: Remove IRQF_ONESHOT
...
Pull more misc vfs updates from Christian Brauner:
"Features:
- Optimize close_range() from O(range size) to O(active FDs) by using
find_next_bit() on the open_fds bitmap instead of linearly scanning
the entire requested range. This is a significant improvement for
large-range close operations on sparse file descriptor tables.
- Add FS_XFLAG_VERITY file attribute for fs-verity files, retrievable
via FS_IOC_FSGETXATTR and file_getattr(). The flag is read-only.
Add tracepoints for fs-verity enable and verify operations,
replacing the previously removed debug printk's.
- Prevent nfsd from exporting special kernel filesystems like pidfs
and nsfs. These filesystems have custom ->open() and ->permission()
export methods that are designed for open_by_handle_at(2) only and
are incompatible with nfsd. Update the exportfs documentation
accordingly.
Fixes:
- Fix KMSAN uninit-value in ovl_fill_real() where strcmp() was used
on a non-null-terminated decrypted directory entry name from
fscrypt. This triggered on encrypted lower layers when the
decrypted name buffer contained uninitialized tail data.
The fix also adds VFS-level name_is_dot(), name_is_dotdot(), and
name_is_dot_dotdot() helpers, replacing various open-coded "." and
".." checks across the tree.
- Fix read-only fsflags not being reset together with xflags in
vfs_fileattr_set(). Currently harmless since no read-only xflags
overlap with flags, but this would cause inconsistencies for any
future shared read-only flag
- Return -EREMOTE instead of -ESRCH from PIDFD_GET_INFO when the
target process is in a different pid namespace. This lets userspace
distinguish "process exited" from "process in another namespace",
matching glibc's pidfd_getpid() behavior
Cleanups:
- Use C-string literals in the Rust seq_file bindings, replacing the
kernel::c_str!() macro (available since Rust 1.77)
- Fix typo in d_walk_ret enum comment, add porting notes for the
readlink_copy() calling convention change"
* tag 'vfs-7.0-rc1.misc.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: add porting notes about readlink_copy()
pidfs: return -EREMOTE when PIDFD_GET_INFO is called on another ns
nfsd: do not allow exporting of special kernel filesystems
exportfs: clarify the documentation of open()/permission() expotrfs ops
fsverity: add tracepoints
fs: add FS_XFLAG_VERITY for fs-verity files
rust: seq_file: replace `kernel::c_str!` with C-Strings
fs: dcache: fix typo in enum d_walk_ret comment
ovl: use name_is_dot* helpers in readdir code
fs: add helpers name_is_dot{,dot,_dotdot}
ovl: Fix uninit-value in ovl_fill_real
fs: reset read-only fsflags together with xflags
fs/file: optimize close_range() complexity from O(N) to O(Sparse)
Pull watchdog updates from Wim Van Sebroeck:
- iTCO: Drop vendor support
- s3c2410_wdt: Drop S3C2410 support
- Convert mpc8xxx-wdt to YAML
- Several small fixes and improvements
* tag 'linux-watchdog-6.20-rc1' of git://www.linux-watchdog.org/linux-watchdog:
dt-bindings: watchdog: qcom-wdt: Document Glymur watchdog
dt-bindings: watchdog: Convert mpc8xxx-wdt to YAML
dt-bindings: watchdog: samsung-wdt: Split if:then: and constrain more
dt-bindings: watchdog: samsung-wdt: Drop S3C2410
watchdog: s3c2410_wdt: Drop S3C2410 support
dt-bindings: watchdog: samsung-wdt: Define cluster constraints top-level
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
watchdog: Make API functions const correct
watchdog: imx7ulp_wdt: handle the nowayout option
watchdog: sbsa: Update the W_IIDR Implementer bit mask to 0xFFF
watchdog: Always return time left until watchdog times out
watchdog: iTCO: Drop vendor support
watchdog: starfive-wdt: Fix PM reference leak in probe error path
fix it87_wdt early reboot by reporting running timer
Pull LED updates from Lee Jones:
"New Support & Features:
- Add support for the TI LP5812 4x3 matrix RGB LED driver, including
autonomous animation engine control and extensive scan multiplexing
modes
- Add a new driver for the ams Osram AS3668 4-channel I2C LED
controller
- Extend the is31fl32xx driver to support the is31fl3293 variant,
which features 3 channels and 12-bit PWM resolution
Improvements & Fixes:
- Prevent the ExpressWire KTD2801 chip from entering an undefined
state by disabling interrupts during time-sensitive communication
- Ensure the Qualcomm LPG driver detects hardware write failures by
checking the return value of regmap_bulk_write() during LUT
programming
- Fix kernel-doc warnings in the lm3692x driver by documenting
missing struct members and standardizing the comment style
- Update the ExpressWire library to use fsleep() and unexport
internal-only functions
- Improve the is31fl32xx driver by reordering code to eliminate
unnecessary forward declarations
Cleanups & Refactoring:
- Simplify the LP55XX common LED driver by utilizing the
for_each_available_child_of_node_scoped() macro for more concise
node iteration
Device Tree Bindings Updates:
- Add new YAML bindings for the TI LP5860 and LP5812 LED controllers,
and the ams Osram AS3668
- Convert the TI LM3697 white LED driver binding to DT schema format
- Allow multicolor LED nodes to be named with numeric suffixes (e.g.,
multi-led-0) to handle multiple instances without unit addresses
- Document support for the PMH0101 variant in the Qualcomm LPG PWM
and SPMI Flash LED bindings
- Add the issi,is31fl3293 compatible string to the is31fl32xx
binding"
* tag 'leds-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
dt-bindings: leds: Convert ti,lm3697 to DT schema
leds: as3668: Driver for the ams Osram 4-channel i2c LED driver
dt-bindings: leds: Add new as3668 support
docs: leds: Document TI LP5812 LED driver
leds: Add basic support for TI/National Semiconductor LP5812 LED Driver
leds: qcom-lpg: Check the return value of regmap_bulk_write()
dt-bindings: leds: qcom,spmi-flash-led: Add PMH0101 compatible
dt-bindings: leds: leds-qcom-lpg: Add support for PMH0101 PWM
dt-bindings: leds: Allow differently named multicolor LEDs
leds: lp55xx: Simplify with scoped for each OF child loop
dt-bindings: leds: add TI/National Semiconductor LP5812 LED Driver
leds: is31f132xx: Add support for is31fl3293
leds: is31f132xx: Re-order code to remove forward declarations
dt-bindings: leds: Add issi,is31fl3293 to leds-is31fl32xx
leds: expresswire: Fix chip state breakage
dt-bindings: leds: Add LP5860 LED controller
leds: lm3692x: Fix kernel-doc for struct lm3692x_led
Pull backlight updates from Lee Jones:
"New Support & Features:
- Add a new driver for the Congatec Board Controller (CGBC)
backlight, providing brightness control via the board controller's
PWM interface
Improvements & Fixes:
- Resolve build failures in the Awinic AW99706 driver by switching to
the correct GPIO consumer header
- Extend the Qualcomm WLED driver to support the specific
over-voltage protection (OVP) values required for the PMI8994 and
PMI8950 variants
Device Tree Bindings Updates:
- Document the device-specific over-voltage protection (OVP)
millivolt ranges and default values for Qualcomm PMI8994 and
PMI8950 WLED controllers"
* tag 'backlight-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: qcom-wled: Change PM8950 WLED configurations
dt-bindings: backlight: qcom-wled: Document ovp values for PMI8950
backlight: qcom-wled: Support ovp values for PMI8994
dt-bindings: backlight: qcom-wled: Document ovp values for PMI8994
backlight: aw99706: Fix build errors caused by wrong gpio header
backlight: Add Congatec Board Controller (CGBC) backlight support
Pull MFD updates from Lee Jones:
"New Support & Features:
- Add comprehensive support for the ROHM BD72720 PMIC, including core
MFD, regulator, GPIO, clock gate, RTC, and power-supply drivers
- Add support for the Rockchip RK801 PMIC, including core MFD and
regulator drivers
- Add support for the ROHM BD73900 PMIC by leveraging existing common
drivers
- Wire up RTC, hwmon, and input sub-devices for the Apple SMC
(macsmc) driver
- Add support for the Delta Networks TN48M switch CPLD via the
simple-mfd-i2c driver
- Add support for the TS133 variant to the QNAP MCU driver
- Provide support for the sama7d65 XLCD controller in the Atmel HLCDC
driver
- Add backlight sub-device support to the Congatec Board Controller
(cgbc)
- Add Intel Nova Lake-S (NVL-S) PCI IDs to the Intel LPSS driver
Improvements & Fixes:
- Implement a "wrapper regmap" for the ROHM BD72720 to handle dual
I2C slave addresses (0x4b and 0x4c) transparently for child devices
- Introduce mutex locking around 'mfd_of_node_list' in the MFD core
to ensure safe concurrent access
- Fix a potential regulator resource leak in the Arizona core driver
during boot sequence failures
- Resolve child device duplication issues on driver rebind for
Qualcomm PM8xxx and OMAP USB host drivers by using
of_platform_depopulate()
- Fix IRQ domain name duplication for the Samsung S2MPG10 by adding a
unique domain suffix
- Implement LOCK register handling for the TI TPS65214 variant to
unlock registers at probe time
- Fully convert the Loongson-2K BMC driver to use managed resources
(pcim) and the standard PCI resource API
- Ensure the Apple SMC mutex is correctly initialized during probe to
prevent NULL pointer dereferences
- Expand the ROHM BD71828 power-supply driver to support 9-bit
register addresses
- Simplify the Samsung S5M RTC driver by querying platform device IRQ
resources directly
- Revert an incorrect read-to-write mask change in the DA9052 SPI
driver to restore default OTP behavior
- Fix kernel-doc warnings in the TI TPS6105x driver
- Cleanups & Refactoring
- Simplify the MFD core by utilizing the scoped
for_each_child_of_node_scoped() macro and streamlining device_node
storage
- Rename ROHM BD71828 IC-specific entities to use consistent prefixes
for better extensibility
- Refactor ROHM BD71828 regmap definitions using the
regmap_reg_range() macro
- Update the ROHM BD71828 driver to use standard C-style comment
headers
- Remove the now unused 'irq_data' field from the Samsung SEC core
structure
- Drop unnecessary use of irqd_get_trigger_type() in the Maxim
MAX77759 driver
- Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT is selected
- Add missing charger-related registers to the ROHM BD71828 core
header and Type-C CC registers to the AXP717
Device Tree Binding Updates:
- Add new bindings for the ROHM BD72720 PMIC, Rockchip RK801 PMIC,
Bitmain BM1880 System Controller, and NXP LPC32xx System Control
Block
- Clarify trickle-charge terminology and add properties for voltage
drop (VDR) correction and upper charge limits to the generic
battery binding
- Document GPR syscon for NXP S32 SoCs and the smp-memram subnode for
Aspeed SCU
- Document numerous new Qualcomm SPMI PMIC compatibles (pmcx0102,
pmh0101, pmk8850, etc)
- Add compatibles for the sama7d65 XLCD (Atmel), LAN9691 Flexcom
(Microchip), and various MediaTek SCPSYS and regulator components
- Fix a dead link to the audio codec binding in the DA9055
documentation"
* tag 'mfd-next-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (41 commits)
dt-bindings: mfd: da9055: Fix dead link to codec binding
mfd: cgbc: Add support for backlight
dt-bindings: mfd: qcom,spmi-pmic: Document PMICs present on Glymur and Kaanapali
dt-bindings: mfd: Document smp-memram subnode for aspeed,ast2x00-scu
mfd: intel-lpss: Add Intel Nova Lake-S PCI IDs
mfd: ls2kbmc: Use PCI API instead of direct accesses
mfd: ls2kbmc: Fully convert to use managed resources
dt-bindings: mfd: mediatek: mt6397: Add missing MT6331 regulator compat
dt-bindings: mfd: mediatek,mt8195-scpsys: Add mediatek,mt6795-scpsys
dt-bindings: mfd: atmel,sama5d2-flexcom: Add microchip,lan9691-flexcom
mfd: omap-usb-host: Fix OF populate on driver rebind
mfd: qcom-pm8xxx: Fix OF populate on driver rebind
dt-bindings: mfd: syscon: Allow syscon compatible for mediatek,mt7981-topmisc
mfd: qnap-mcu: Add driver data for TS133 variant
dt-bindings: mfd: qnap,ts433-mcu: Add qnap,ts133-mcu compatible
mfd: sec: Fix IRQ domain names duplication
mfd: simple-mfd-i2c: Add Delta TN48M CPLD support
mfd: macsmc: Initialize mutex
dt-bindings: mfd: nxp: Add NXP LPC32xx System Control Block
mfd: Kconfig: Default MFD_SPACEMIT_P1 to 'm' if ARCH_SPACEMIT
...
Pull documentation fixes from Jonathan Corbet:
"A handful of small, late-arriving documentation fixes"
* tag 'docs-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux:
docs: toshiba_haps: fix grammar error in SSD warning
Docs/mm: fix typos and grammar in page_tables.rst
Docs/core-api: fix typos in rbtree.rst
docs: clarify wording in programming-language.rst
docs: process: maintainer-pgp-guide: update kernel.org docs link
docs: kdoc_parser: allow __exit in function prototypes
Pull TSM updates from Dan Williams:
"A couple of updates to the maximum buffer sizes supported for the
configfs-tsm-reports interface.
This interface is a common transport that conveys the varied
architecture specific launch attestation reports for confidential VMs.
- Prepare the configfs-tsm-reports interface for passing larger
attestation evidence blobs for "Device Identifier Composition
Engine" (DICE) and Post Quantum Crypto (PQC)
- Update the tdx-guest driver for DICE evidence (larger certificate
chains and the CBOR Web Token schema)"
* tag 'tsm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
configfs-tsm-report: tdx_guest: Increase Quote buffer size to 128KB
configfs-tsm-report: Increase TSM_REPORT_OUTBLOB_MAX to 16MB
configfs-tsm-report: Document size limits for outblob attributes
Pull i2c updates from Wolfram Sang:
- core: cleaner fwnode usage
- tegra: timing improvements and Tegra264 support
- lpi2c: fix SMBus block read NACK after byte count
- amd-mp2, designware, mlxbf, rtl9300, spacemit, tegra: cleanups
- designware:
- use a dedicated algorithm for AMD Navi
- replace magic numbers with named constants
- replace min_t() with min() to avoid u8 truncation
- refactor core to enable mode switching
- imx-lpi2c: add runtime PM support for IRQ and clock handling
- lan9691-i2c: add new driver
- rtl9300: use OF helpers directly and avoid fwnode handling
- spacemit: add bus reset support
- units: add HZ_PER_GHZ and use it in several i2c drivers
- at24 i2c eeprom:
- add a set of new compatibles to DT bindings
- use dev_err_probe() consistently in the driver
* tag 'i2c-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (46 commits)
i2c: imx-lpi2c: fix SMBus block read NACK after byte count
i2c: designware: Remove an unnecessary condition
i2c: designware: Enable mode swapping
i2c: designware: Combine the init functions
i2c: designware: Combine some of the common functions
i2c: designware: Use device_is_compatible() instead of custom approach
dt-bindings: eeprom: at24: Add compatible for Puya P24C128F
drivers/i2c/busses: use min() instead of min_t()
i2c: imx-lpi2c: Add runtime PM support for IRQ and clock management on i.MX8QXP/8QM
i2c: amd-mp2: clean up amd_mp2_find_device()
i2c: designware: Replace magic numbers with named constants
i2c: rtl9300: use of instead of fwnode
i2c: rtl9300: remove const cast
i2c: tegra: remove unused rst
i2c: designware: Remove not-going-to-be-supported code for Baikal SoC
i2c: spacemit: drop useless spaces
i2c: mlxbf: Use HZ_PER_KHZ in the driver
i2c: mlxbf: Remove unused bus speed definitions
i2c: core: Use dev_fwnode()
i2c: core: Replace custom implementation of device_match_fwnode()
...
Pull input updates from Dmitry Torokhov:
- support for FocalTech FT8112 added to i2c-hid driver
- support for FocalTech FT3518 added to edt-ft5x06 driver
- support for power buttons in TWL603x chips added to twl4030-pwrbutton
driver
- an update to gpio-decoder driver to make it usable on non-OF
platforms and to clean up the code
- an update to synaptics_i2c driver switching it to use managed
resources and a fix to restarting polling after resume
- an update to gpio-keys driver to fall back to getting IRQ from
resources if not specified using other means
- an update to ili210x driver to support polling mode
- a number of input drivers switched to scnprintf() to suppress
truncation warnings
- a number of updates and conversions of device tree bindings to yaml
format
- fixes to spelling in comments and messages in several drivers
- other assorted fixups
* tag 'input-for-v7.0-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (57 commits)
dt-bindings: input: qcom,pm8941-pwrkey: Document PMM8654AU
dt-bindings: input: touchscreen: imagis: allow linux,keycodes for ist3038
Input: apbps2 - fix comment style and typos
Input: gpio_keys - fall back to platform_get_irq() for interrupt-only keys
Input: novatek-nvt-ts - drop wake_type check
dt-bindings: input: touchscreen: tsc2007: document '#io-channel-cells'
Input: ili210x - add support for polling mode
dt-bindings: touchscreen: trivial-touch: Drop 'interrupts' requirement for old Ilitek
Input: appletouch - fix potential race between resume and open
HID: i2c-hid: Add FocalTech FT8112
dt-bindings: input: i2c-hid: Introduce FocalTech FT8112
Input: synaptics_i2c - switch to using managed resources
Input: synaptics_i2c - guard polling restart in resume
Input: gpio_decoder - don't use "proxy" headers
Input: gpio_decoder - make use of the macros from bits.h
Input: gpio_decoder - replace custom loop by gpiod_get_array_value_cansleep()
Input: gpio_decoder - unify messages with help of dev_err_probe()
Input: gpio_decoder - make use of device properties
Input: serio - complete sizeof(*pointer) conversions
Input: wdt87xx_i2c - switch to use dev_err_probe()
...
Pull clk updates from Stephen Boyd:
"Not much changed in the clk framework this time except the clk.h
consumer API moved the context saving APIs around to fix a build error
in certain configurations.
There was a change to the core framework for CLK_OPS_PARENT_ENABLE
behavior during registration, but it wrecked existing drivers that
didn't expect things to be turned off during clk registration so it
got reverted.
This cycle is really a large collection of new clk drivers, primarily
for Qualcomm SoCs but also for Amlogic, SpacemiT, Google, and Aspeed.
Another big change in here is support for automatic hardware clock
gating on Samsung SoCs where the clks turn on and off when needed.
Ideally more vendors move to this method for better power savings. The
highlights are in the updates section below.
Beyond all the new drivers we have a bunch of cleanups like converting
drivers from divider_round_rate() to divider_determine_rate() and
using scoped for each OF child loops. Otherwise it's the usual data
fixes and plugging reference leaks, etc. that's all pretty ordinary
but not critical enough to fix until the next release.
New Drivers:
- Qualcomm Kaanapali global, tcsr, rpmh, display, gpu, camera, and
video clk controllers
- Qualcomm SM8750 camera clk controllers
- Qualcomm MSM8940 and SDM439 global clk controllers
- Google GS101 Display Process Unit (DPU) clk controllers
- SpacemiT K3 clk controllers
- Amlogic t7 clk controllers
- Aspeed AST2700 clk controllers
Updates:
- Convert clock dividers from round_rate() to determine_rate()
- Fix sparse warnings, kernel-doc warnings, and plug leaked OF refs
- Automatic hardware clk gating on Google GS101 SoCs
- Amlogic s4 video clks
- CAN-FD clks and resets on Renesas RZ/T2H, RZ/N2H, RZ/V2H, and
RZ/V2N
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/T21H and RZ/N2H
- DMAC, interrupt controller (ICU), SPI, and thermal (TSU) clocks and
resets on Renesas RZ/V2N
- More serial (RSCI) clocks and resets on Renesas RZ/V2H and RZ/V2N
- CPU frequency scaling on T-HEAD TH1520"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (165 commits)
clk: aspeed: Add reset for HACE/VIDEO
dt-bindings: clock: aspeed: Add VIDEO reset definition
clk: aspeed: add AST2700 clock driver
MAINTAINERS: Add entry for ASPEED clock drivers.
clk: aspeed: Move the existing ASPEED clk drivers into aspeed subdirectory.
Revert "clk: Respect CLK_OPS_PARENT_ENABLE during recalc"
clk: Disable KUNIT_UML_PCI
dt-bindings: clk: rs9: Fix DIF pattern match
clk: rs9: Convert to DEFINE_SIMPLE_DEV_PM_OPS()
clk: rs9: Reserve 8 struct clk_hw slots for for 9FGV0841
clk: qcom: sm8750: Constify 'qcom_cc_desc' in SM8750 camcc
clk: zynqmp: pll: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: zynqmp: divider: Fix zynqmp_clk_divider_determine_rate kerneldoc
clk: mediatek: Fix error handling in runtime PM setup
clk: mediatek: don't select clk-mt8192 for all ARM64 builds
clk: mediatek: Add mfg_eb as parent to mt8196 mfgpll clocks
clk: mediatek: Refactor pllfh registration to pass device
clk: mediatek: Pass device to clk_hw_register for PLLs
clk: mediatek: Refactor pll registration to pass device
clk: Respect CLK_OPS_PARENT_ENABLE during recalc
...
Pull LoongArch updates from Huacai Chen:
- Select HAVE_CMPXCHG_{LOCAL,DOUBLE}
- Add 128-bit atomic cmpxchg support
- Add HOTPLUG_SMT implementation
- Wire up memfd_secret system call
- Fix boot errors and unwind errors for KASAN
- Use BPF prog pack allocator and add BPF arena support
- Update dts files to add nand controllers
- Some bug fixes and other small changes
* tag 'loongarch-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: dts: loongson-2k1000: Add nand controller support
LoongArch: dts: loongson-2k0500: Add nand controller support
LoongArch: BPF: Implement bpf_addr_space_cast instruction
LoongArch: BPF: Implement PROBE_MEM32 pseudo instructions
LoongArch: BPF: Use BPF prog pack allocator
LoongArch: Use IS_ERR_PCPU() macro for KGDB
LoongArch: Rework KASAN initialization for PTW-enabled systems
LoongArch: Disable instrumentation for setup_ptwalker()
LoongArch: Remove some extern variables in source files
LoongArch: Guard percpu handler under !CONFIG_PREEMPT_RT
LoongArch: Handle percpu handler address for ORC unwinder
LoongArch: Use %px to print unmodified unwinding address
LoongArch: Prefer top-down allocation after arch_mem_init()
LoongArch: Add HOTPLUG_SMT implementation
LoongArch: Make cpumask_of_node() robust against NUMA_NO_NODE
LoongArch: Wire up memfd_secret system call
LoongArch: Replace seq_printf() with seq_puts() for simple strings
LoongArch: Add 128-bit atomic cmpxchg support
LoongArch: Add detection for SC.Q support
LoongArch: Select HAVE_CMPXCHG_LOCAL in Kconfig
