Now that we're supporting things like Ada and the GSP, there's situations
where we really need to actually know the display state that we're starting
with when loading the driver in order to prevent breaking GSP expectations.
The first step in doing this is making it so that we can read the current
state of IORs from nvkm in DRM, so that we can fill in said into into the
atomic state.
We do this by introducing an INHERIT ioctl to nvkm/nvif. This is basically
another form of ACQUIRE, except that it will only acquire the given output
path for userspace if it's already set up in hardware. This way, we can go
through and probe each outp object we have in DRM in order to figure out
the current hardware state of each one. If the outp isn't in use, it simply
returns -ENODEV.
This is also part of the work that will be required for implementing GSP
support for display. While the GSP should mostly work without this commit,
this commit should fix some edge case bugs that can occur on initial driver
load. This also paves the way for some of the initial groundwork for
fastboot support.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Acked-by: Danilo Krummrich <me@dakr.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230919220442.202488-11-lyude@redhat.com
When testing the d71 writeback layer function,
the output format is set to NV12, and the following error message is displayed:
[drm:komeda_fb_is_layer_supported] Layer TYPE: 4 doesn't support fb FMT: NV12 little-endian (0x3231564e) with modifier: 0x0..
Check the d71 data manual, writeback layer output formats includes NV12 format.
Signed-off-by: baozhu.liu <lucas.liu@siengine.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230829093004.22860-1-lucas.liu@siengine.com
The commit 45b58669e5 ("drm/ssd130x: Allocate buffer in the plane's
.atomic_check() callback") moved the allocation of the intermediate and
HW buffers from the encoder's .atomic_enable callback, to the plane's
.atomic_check callback.
This was suggested by Maxime Ripard, because drivers aren't allowed to
fail after the drm_atomic_helper_swap_state() function has been called.
And the encoder's .atomic_enable happens after the new atomic state has
been swapped, so allocations (that can fail) shouldn't be done there.
But the HW buffer isn't really tied to the plane's state. It has a fixed
size that only depends on the (also fixed) display resolution defined in
the Device Tree Blob.
That buffer can be considered part of the CRTC state, and for this reason
makes more sense to do its allocation in the CRTC .atomic_check callback.
The other allocated buffer (used to store a conversion from the emulated
XR24 format to the native R1 format) is part of the plane's state, since
it will be optional once the driver supports R1 and allows user-space to
set that pixel format.
So let's keep the allocation for it in the plane's .atomic_check callback,
this can't be moved to the CRTC's .atomic_check because changing a format
does not trigger a CRTC mode set.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/dri-devel/CAMuHMdWv_QSatDgihr8=2SXHhvp=icNxumZcZOPwT9Q_QiogNQ@mail.gmail.com/
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913052938.1114651-1-javierm@redhat.com
When building with clang, there is a warning (or error when
CONFIG_WERROR is set):
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:368:21: error: variable 'old_payload' is uninitialized when used here [-Werror,-Wuninitialized]
368 | new_payload, old_payload);
| ^~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_helpers.c:344:61: note: initialize the variable 'old_payload' to silence this warning
344 | struct drm_dp_mst_atomic_payload *new_payload, *old_payload;
| ^
| = NULL
1 error generated.
This variable is not required outside of this function so allocate
old_payload on the stack and pass it by reference to
dm_helpers_construct_old_payload(), resolving the warning.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1931
Fixes: 5aa1dfcdf0 ("drm/mst: Refactor the flow for payload allocation/removement")
Reviewed-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230913-fix-wuninitialized-dm_helpers_dp_mst_send_payload_allocation-v1-1-2d1b0a3ef16c@kernel.org
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown
time. Among other things, this means that if a panel is in use that it
won't be cleanly powered off at system shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart comes straight out of the kernel doc "driver
instance overview" in drm_drv.c.
Since this driver uses the component model and shutdown happens at the
base driver, we communicate whether we have to call
drm_atomic_helper_shutdown() by seeing if drvdata is non-NULL.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901164111.RFT.3.Iea742f06d8bec41598aa40378fc625fbd7e8a3d6@changeid
Based on grepping through the source code this driver appears to be
missing a call to drm_atomic_helper_shutdown() at system shutdown time
and at driver unbind time. Among other things, this means that if a
panel is in use that it won't be cleanly powered off at system
shutdown time.
The fact that we should call drm_atomic_helper_shutdown() in the case
of OS shutdown/restart and at driver remove (or unbind) time comes
straight out of the kernel doc "driver instance overview" in
drm_drv.c.
A few notes about this fix:
- When adding drm_atomic_helper_shutdown() to the unbind path, I added
it after drm_kms_helper_poll_fini() since that's when other drivers
seemed to have it.
- Technically with a previous patch, ("drm/atomic-helper:
drm_atomic_helper_shutdown(NULL) should be a noop"), we don't
actually need to check to see if our "drm" pointer is NULL before
calling drm_atomic_helper_shutdown(). We'll leave the "if" test in,
though, so that this patch can land without any dependencies. It
could potentially be removed later.
- This patch also makes sure to set the drvdata to NULL in the case of
bind errors to make sure that shutdown can't access freed data.
Suggested-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901164111.RFT.13.I0a9940ff6f387d6acf4e71d8c7dbaff8c42e3aaa@changeid
As with other places in the Linux kernel--kfree(NULL) being the most
famous example--it's convenient to treat being passed a NULL argument
as a noop in cleanup functions. Let's make
drm_atomic_helper_shutdown() work like this.
This is convenient for DRM devices that use the "component" model. On
these devices we want shutdown to be a noop if the bind() call of the
component hasn't been called yet. As long as drivers are careful to
make sure the drvdata is NULL whenever the driver is not bound then we
can just do a simple call to drm_atomic_helper_shutdown() with the
drvdata at shutdown time.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230901163944.RFT.1.I906acd535bece03b6671d97c2826c6f0444f4728@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
For the "otm8009a" driver we fully remove the storing of the "enabled"
state and we remove the double-checking, but we still keep the storing
of the "prepared" state since the backlight code in the driver checks
it. This backlight code may not be perfectly safe since there doesn't
appear to be sufficient synchronization between the backlight driver
(which userspace can call into directly) and the code that's
unpreparing the panel. However, this lack of safety is not new and can
be addressed in a future patch.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.3.I6a4a3c81c78acf5acdc2e5b5d936e19bf57ec07a@changeid
As talked about in commit d2aacaf073 ("drm/panel: Check for already
prepared/enabled in drm_panel"), we want to remove needless code from
panel drivers that was storing and double-checking the
prepared/enabled state. Even if someone was relying on the
double-check before, that double-check is now in the core and not
needed in individual drivers.
For the s6e63m0 panel driver, this actually fixes a subtle/minor error
handling bug in s6e63m0_prepare(). In one error case s6e63m0_prepare()
called s6e63m0_unprepare() directly if there was an error. This call
to s6e63m0_unprepare() would have been a no-op since ctx->prepared
wasn't set yet.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230804140605.RFC.2.Iabafd062e70f6b6b554cf23eeb75f57a80f7e985@changeid
