Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf.
Current release - regressions:
- Revert "net: r8169: Disable multicast filter for RTL8168H and
RTL8107E"
- kselftest: rtnetlink: fix ip route command typo
Current release - new code bugs:
- s390/ism: make sure ism driver implies smc protocol in kconfig
- two build fixes for tools/net
Previous releases - regressions:
- rxrpc: couple of ACK/PING/RTT handling fixes
Previous releases - always broken:
- bpf: verify bpf_loop() callbacks as if they are called unknown
number of times
- improve stability of auto-bonding with Hyper-V
- account BPF-neigh-redirected traffic in interface statistics
Misc:
- net: fill in some more MODULE_DESCRIPTION()s"
* tag 'net-6.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
tools: ynl: fix duplicate op name in devlink
tools: ynl: fix header path for nfsd
net: ipa: fix one GSI register field width
tls: fix NULL deref on tls_sw_splice_eof() with empty record
net: axienet: Fix check for partial TX checksum
vsock/test: fix SEQPACKET message bounds test
i40e: Fix adding unsupported cloud filters
ice: restore timestamp configuration after device reset
ice: unify logic for programming PFINT_TSYN_MSK
ice: remove ptp_tx ring parameter flag
amd-xgbe: propagate the correct speed and duplex status
amd-xgbe: handle the corner-case during tx completion
amd-xgbe: handle corner-case during sfp hotplug
net: veth: fix ethtool stats reporting
octeontx2-pf: Fix ntuple rule creation to direct packet to VF with higher Rx queue than its PF
net: usb: qmi_wwan: claim interface 4 for ZTE MF290
Revert "net: r8169: Disable multicast filter for RTL8168H and RTL8107E"
net/smc: avoid data corruption caused by decline
nfc: virtual_ncidev: Add variable to check if ndev is running
dpll: Fix potential msg memleak when genlmsg_put_reply failed
...
Daniel Borkmann says:
====================
pull-request: bpf-next 2023-11-21
We've added 85 non-merge commits during the last 12 day(s) which contain
a total of 63 files changed, 4464 insertions(+), 1484 deletions(-).
The main changes are:
1) Huge batch of verifier changes to improve BPF register bounds logic
and range support along with a large test suite, and verifier log
improvements, all from Andrii Nakryiko.
2) Add a new kfunc which acquires the associated cgroup of a task within
a specific cgroup v1 hierarchy where the latter is identified by its id,
from Yafang Shao.
3) Extend verifier to allow bpf_refcount_acquire() of a map value field
obtained via direct load which is a use-case needed in sched_ext,
from Dave Marchevsky.
4) Fix bpf_get_task_stack() helper to add the correct crosstask check
for the get_perf_callchain(), from Jordan Rome.
5) Fix BPF task_iter internals where lockless usage of next_thread()
was wrong. The rework also simplifies the code, from Oleg Nesterov.
6) Fix uninitialized tail padding via LIBBPF_OPTS_RESET, and another
fix for certain BPF UAPI structs to fix verifier failures seen
in bpf_dynptr usage, from Yonghong Song.
7) Add BPF selftest fixes for map_percpu_stats flakes due to per-CPU BPF
memory allocator not being able to allocate per-CPU pointer successfully,
from Hou Tao.
8) Add prep work around dynptr and string handling for kfuncs which
is later going to be used by file verification via BPF LSM and fsverity,
from Song Liu.
9) Improve BPF selftests to update multiple prog_tests to use ASSERT_*
macros, from Yuran Pereira.
10) Optimize LPM trie lookup to check prefixlen before walking the trie,
from Florian Lehner.
11) Consolidate virtio/9p configs from BPF selftests in config.vm file
given they are needed consistently across archs, from Manu Bretelle.
12) Small BPF verifier refactor to remove register_is_const(),
from Shung-Hsi Yu.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (85 commits)
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in vmlinux
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_obj_id
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bind_perm
selftests/bpf: Replaces the usage of CHECK calls for ASSERTs in bpf_tcp_ca
selftests/bpf: reduce verboseness of reg_bounds selftest logs
bpf: bpf_iter_task_next: use next_task(kit->task) rather than next_task(kit->pos)
bpf: bpf_iter_task_next: use __next_thread() rather than next_thread()
bpf: task_group_seq_get_next: use __next_thread() rather than next_thread()
bpf: emit frameno for PTR_TO_STACK regs if it differs from current one
bpf: smarter verifier log number printing logic
bpf: omit default off=0 and imm=0 in register state log
bpf: emit map name in register state if applicable and available
bpf: print spilled register state in stack slot
bpf: extract register state printing
bpf: move verifier state printing code to kernel/bpf/log.c
bpf: move verbose_linfo() into kernel/bpf/log.c
bpf: rename BPF_F_TEST_SANITY_STRICT to BPF_F_TEST_REG_INVARIANTS
bpf: Remove test for MOVSX32 with offset=32
selftests/bpf: add iter test requiring range x range logic
veristat: add ability to set BPF_F_TEST_SANITY_STRICT flag with -r flag
...
====================
Link: https://lore.kernel.org/r/20231122000500.28126-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In some cases verifier can't infer convergence of the bpf_loop()
iteration. E.g. for the following program:
static int cb(__u32 idx, struct num_context* ctx)
{
ctx->i++;
return 0;
}
SEC("?raw_tp")
int prog(void *_)
{
struct num_context ctx = { .i = 0 };
__u8 choice_arr[2] = { 0, 1 };
bpf_loop(2, cb, &ctx, 0);
return choice_arr[ctx.i];
}
Each 'cb' simulation would eventually return to 'prog' and reach
'return choice_arr[ctx.i]' statement. At which point ctx.i would be
marked precise, thus forcing verifier to track multitude of separate
states with {.i=0}, {.i=1}, ... at bpf_loop() callback entry.
This commit allows "brute force" handling for such cases by limiting
number of callback body simulations using 'umax' value of the first
bpf_loop() parameter.
For this, extend bpf_func_state with 'callback_depth' field.
Increment this field when callback visiting state is pushed to states
traversal stack. For frame #N it's 'callback_depth' field counts how
many times callback with frame depth N+1 had been executed.
Use bpf_func_state specifically to allow independent tracking of
callback depths when multiple nested bpf_loop() calls are present.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-11-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Prior to this patch callbacks were handled as regular function calls,
execution of callback body was modeled exactly once.
This patch updates callbacks handling logic as follows:
- introduces a function push_callback_call() that schedules callback
body verification in env->head stack;
- updates prepare_func_exit() to reschedule callback body verification
upon BPF_EXIT;
- as calls to bpf_*_iter_next(), calls to callback invoking functions
are marked as checkpoints;
- is_state_visited() is updated to stop callback based iteration when
some identical parent state is found.
Paths with callback function invoked zero times are now verified first,
which leads to necessity to modify some selftests:
- the following negative tests required adding release/unlock/drop
calls to avoid previously masked unrelated error reports:
- cb_refs.c:underflow_prog
- exceptions_fail.c:reject_rbtree_add_throw
- exceptions_fail.c:reject_with_cp_reference
- the following precision tracking selftests needed change in expected
log trace:
- verifier_subprog_precision.c:callback_result_precise
(note: r0 precision is no longer propagated inside callback and
I think this is a correct behavior)
- verifier_subprog_precision.c:parent_callee_saved_reg_precise_with_callback
- verifier_subprog_precision.c:parent_stack_slot_precise_with_callback
Reported-by: Andrew Werner <awerner32@gmail.com>
Closes: https://lore.kernel.org/bpf/CA+vRuzPChFNXmouzGG+wsy=6eMcfr1mFG0F3g7rbg-sedGKW3w@mail.gmail.com/
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/r/20231121020701.26440-7-eddyz87@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Just move struct pcpu_dstats out of the vrf into the core, and streamline
the field names slightly, so they better align with the {t,l}stats ones.
No functional change otherwise. A conversion of the u64s to u64_stats_t
could be done at a separate point in future. This move is needed as we are
moving the {t,l,d}stats allocation/freeing to the core.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20231114004220.6495-2-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix section mismatch warning messages for riscv and loongarch
- Remove CONFIG_IA64 left-over from linux/export-internal.h
- Fix the location of the quotes for UIMAGE_NAME
- Fix a memory leak bug in Kconfig
* tag 'kbuild-fixes-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix memory leak from range properties
kbuild: Move the single quotes for image name
linux/export: clean up the IA-64 KSYM_FUNC macro
modpost: fix section mismatch message for RELA
Pull timer fix from Borislav Petkov:
- Do the push of pending hrtimers away from a CPU which is being
offlined earlier in the offlining process in order to prevent a
deadlock
* tag 'timers_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hrtimers: Push pending hrtimers away from outgoing CPU earlier
Pull perf fix from Borislav Petkov:
- Make sure the context refcount is transferred too when migrating perf
events
* tag 'perf_urgent_for_v6.7_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Fix cpuctx refcounting
if a PF has 256 or more VFs, ip link command will allocate an order 3
memory or more, and maybe trigger OOM due to memory fragment,
the VFs needed memory size is computed in rtnl_vfinfo_size.
so introduce nlmsg_new_large which calls netlink_alloc_large_skb in
which vmalloc is used for large memory, to avoid the failure of
allocating memory
ip invoked oom-killer: gfp_mask=0xc2cc0(GFP_KERNEL|__GFP_NOWARN|\
__GFP_COMP|__GFP_NOMEMALLOC), order=3, oom_score_adj=0
CPU: 74 PID: 204414 Comm: ip Kdump: loaded Tainted: P OE
Call Trace:
dump_stack+0x57/0x6a
dump_header+0x4a/0x210
oom_kill_process+0xe4/0x140
out_of_memory+0x3e8/0x790
__alloc_pages_slowpath.constprop.116+0x953/0xc50
__alloc_pages_nodemask+0x2af/0x310
kmalloc_large_node+0x38/0xf0
__kmalloc_node_track_caller+0x417/0x4d0
__kmalloc_reserve.isra.61+0x2e/0x80
__alloc_skb+0x82/0x1c0
rtnl_getlink+0x24f/0x370
rtnetlink_rcv_msg+0x12c/0x350
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1b2/0x280
netlink_sendmsg+0x355/0x4a0
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1ea/0x250
___sys_sendmsg+0x88/0xd0
__sys_sendmsg+0x5e/0xa0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f95a65a5b70
Cc: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Link: https://lore.kernel.org/r/20231115120108.3711-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Revert following commits:
commit acec05fb78 ("net_tstamp: Add TIMESTAMPING SOFTWARE and HARDWARE mask")
commit 11d55be06d ("net: ethtool: Add a command to expose current time stamping layer")
commit bb8645b00c ("netlink: specs: Introduce new netlink command to get current timestamp")
commit d905f9c753 ("net: ethtool: Add a command to list available time stamping layers")
commit aed5004ee7 ("netlink: specs: Introduce new netlink command to list available time stamping layers")
commit 51bdf3165f ("net: Replace hwtstamp_source by timestamping layer")
commit 0f7f463d48 ("net: Change the API of PHY default timestamp to MAC")
commit 091fab1228 ("net: ethtool: ts: Update GET_TS to reply the current selected timestamp")
commit 152c75e1d0 ("net: ethtool: ts: Let the active time stamping layer be selectable")
commit ee60ea6be0 ("netlink: specs: Introduce time stamping set command")
They need more time for reviews.
Link: https://lore.kernel.org/all/20231118183529.6e67100c@kernel.org/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move a good chunk of code from verifier.c to log.c: verifier state
verbose printing logic. This is an important and very much
logging/debugging oriented code. It fits the overlall log.c's focus on
verifier logging, and moving it allows to keep growing it without
unnecessarily adding to verifier.c code that otherwise contains a core
verification logic.
There are not many shared dependencies between this code and the rest of
verifier.c code, except a few single-line helpers for various register
type checks and a bit of state "scratching" helpers. We move all such
trivial helpers into include/bpf/bpf_verifier.h as static inlines.
No functional changes in this patch.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
verifier.c is huge. Let's try to move out parts that are logging-related
into log.c, as we previously did with bpf_log() and other related stuff.
This patch moves line info verbose output routines: it's pretty
self-contained and isolated code, so there is no problem with this.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20231118034623.3320920-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
mlx5-updates-2023-11-13
1) Cleanup patches, leftovers from previous cycle
2) Allow sync reset flow when BF MGT interface device is present
3) Trivial ptp refactorings and improvements
4) Add local loopback counter to vport rep stats
Signed-off-by: David S. Miller <davem@davemloft.net>
Change the API to select MAC default time stamping instead of the PHY.
Indeed the PHY is closer to the wire therefore theoretically it has less
delay than the MAC timestamping but the reality is different. Due to lower
time stamping clock frequency, latency in the MDIO bus and no PHC hardware
synchronization between different PHY, the PHY PTP is often less precise
than the MAC. The exception is for PHY designed specially for PTP case but
these devices are not very widespread. For not breaking the compatibility I
introduce a default_timestamp flag in phy_device that is set by the phy
driver to know we are using the old API behavior.
The phy_set_timestamp function is called at each call of phy_attach_direct.
In case of MAC driver using phylink this function is called when the
interface is turned up. Then if the interface goes down and up again the
last choice of timestamp will be overwritten by the default choice.
A solution could be to cache the timestamp status but it can bring other
issues. In case of SFP, if we change the module, it doesn't make sense to
blindly re-set the timestamp back to PHY, if the new module has a PHY with
mediocre timestamping capabilities.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace hwtstamp_source which is only used by the kernel_hwtstamp_config
structure by the more widely use timestamp_layer structure. This is done
to prepare the support of selectable timestamping source.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Make the dev_set_hwtstamp_phylib function accessible in prevision to use
it from ethtool to reset the tstamp current configuration.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The PHYs hwtstamp callback are still getting the timestamp config from
ifreq and using copy_from/to_user.
Get rid of these functions by using timestamp configuration in parameter.
This also allow to move on to kernel_hwtstamp_config and be similar to
net devices using the new ndo_hwstamp_get/set.
This adds the possibility to manipulate the timestamp configuration
from the kernel which was not possible with the copy_from/to_user.
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit cf8e865810 ("arch: Remove Itanium (IA-64) architecture"),
there is no need to keep the IA-64 definition of the KSYM_FUNC macro.
Clean up the IA-64 definition of the KSYM_FUNC macro.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Add a linkmode_fill() helper, which will allow us to convert phylink's
open coded bitmap_fill() operations.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from Paolo Abeni:
"Including fixes from BPF and netfilter.
Current release - regressions:
- core: fix undefined behavior in netdev name allocation
- bpf: do not allocate percpu memory at init stage
- netfilter: nf_tables: split async and sync catchall in two
functions
- mptcp: fix possible NULL pointer dereference on close
Current release - new code bugs:
- eth: ice: dpll: fix initial lock status of dpll
Previous releases - regressions:
- bpf: fix precision backtracking instruction iteration
- af_unix: fix use-after-free in unix_stream_read_actor()
- tipc: fix kernel-infoleak due to uninitialized TLV value
- eth: bonding: stop the device in bond_setup_by_slave()
- eth: mlx5:
- fix double free of encap_header
- avoid referencing skb after free-ing in drop path
- eth: hns3: fix VF reset
- eth: mvneta: fix calls to page_pool_get_stats
Previous releases - always broken:
- core: set SOCK_RCU_FREE before inserting socket into hashtable
- bpf: fix control-flow graph checking in privileged mode
- eth: ppp: limit MRU to 64K
- eth: stmmac: avoid rx queue overrun
- eth: icssg-prueth: fix error cleanup on failing initialization
- eth: hns3: fix out-of-bounds access may occur when coalesce info is
read via debugfs
- eth: cortina: handle large frames
Misc:
- selftests: gso: support CONFIG_MAX_SKB_FRAGS up to 45"
* tag 'net-6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (78 commits)
macvlan: Don't propagate promisc change to lower dev in passthru
net: sched: do not offload flows with a helper in act_ct
net/mlx5e: Check return value of snprintf writing to fw_version buffer for representors
net/mlx5e: Check return value of snprintf writing to fw_version buffer
net/mlx5e: Reduce the size of icosq_str
net/mlx5: Increase size of irq name buffer
net/mlx5e: Update doorbell for port timestamping CQ before the software counter
net/mlx5e: Track xmit submission to PTP WQ after populating metadata map
net/mlx5e: Avoid referencing skb after free-ing in drop path of mlx5e_sq_xmit_wqe
net/mlx5e: Don't modify the peer sent-to-vport rules for IPSec offload
net/mlx5e: Fix pedit endianness
net/mlx5e: fix double free of encap_header in update funcs
net/mlx5e: fix double free of encap_header
net/mlx5: Decouple PHC .adjtime and .adjphase implementations
net/mlx5: DR, Allow old devices to use multi destination FTE
net/mlx5: Free used cpus mask when an IRQ is released
Revert "net/mlx5: DR, Supporting inline WQE when possible"
bpf: Do not allocate percpu memory at init stage
net: Fix undefined behavior in netdev name allocation
dt-bindings: net: ethernet-controller: Fix formatting error
...
Pull virtio fixes from Michael Tsirkin:
"Bugfixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vhost-vdpa: fix use after free in vhost_vdpa_probe()
virtio_pci: Switch away from deprecated irq_set_affinity_hint
riscv, qemu_fw_cfg: Add support for RISC-V architecture
vdpa_sim_blk: allocate the buffer zeroed
virtio_pci: move structure to a header
Alexei Starovoitov says:
====================
pull-request: bpf 2023-11-15
We've added 7 non-merge commits during the last 6 day(s) which contain
a total of 9 files changed, 200 insertions(+), 49 deletions(-).
The main changes are:
1) Do not allocate bpf specific percpu memory unconditionally, from Yonghong.
2) Fix precision backtracking instruction iteration, from Andrii.
3) Fix control flow graph checking, from Andrii.
4) Fix xskxceiver selftest build, from Anders.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Do not allocate percpu memory at init stage
selftests/bpf: add more test cases for check_cfg()
bpf: fix control-flow graph checking in privileged mode
selftests/bpf: add edge case backtracking logic test
bpf: fix precision backtracking instruction iteration
bpf: handle ldimm64 properly in check_cfg()
selftests: bpf: xskxceiver: ksft_print_msg: fix format type error
====================
Link: https://lore.kernel.org/r/20231115214949.48854-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add simple sanity checks that validate well-formed ranges (min <= max)
across u64, s64, u32, and s32 ranges. Also for cases when the value is
constant (either 64-bit or 32-bit), we validate that ranges and tnums
are in agreement.
These bounds checks are performed at the end of BPF_ALU/BPF_ALU64
operations, on conditional jumps, and for LDX instructions (where subreg
zero/sign extension is probably the most important to check). This
covers most of the interesting cases.
Also, we validate the sanity of the return register when manually
adjusting it for some special helpers.
By default, sanity violation will trigger a warning in verifier log and
resetting register bounds to "unbounded" ones. But to aid development
and debugging, BPF_F_TEST_SANITY_STRICT flag is added, which will
trigger hard failure of verification with -EFAULT on register bounds
violations. This allows selftests to catch such issues. veristat will
also gain a CLI option to enable this behavior.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231112010609.848406-5-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Generalize bounds adjustment logic of reg_set_min_max() to handle not
just register vs constant case, but in general any register vs any
register cases. For most of the operations it's trivial extension based
on range vs range comparison logic, we just need to properly pick
min/max of a range to compare against min/max of the other range.
For BPF_JSET we keep the original capabilities, just make sure JSET is
integrated in the common framework. This is manifested in the
internal-only BPF_JSET + BPF_X "opcode" to allow for simpler and more
uniform rev_opcode() handling. See the code for details. This allows to
reuse the same code exactly both for TRUE and FALSE branches without
explicitly handling both conditions with custom code.
Note also that now we don't need a special handling of BPF_JEQ/BPF_JNE
case none of the registers are constants. This is now just a normal
generic case handled by reg_set_min_max().
To make tnum handling cleaner, tnum_with_subreg() helper is added, as
that's a common operator when dealing with 32-bit subregister bounds.
This keeps the overall logic much less noisy when it comes to tnums.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://lore.kernel.org/r/20231112010609.848406-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Some mlx5 devices do not support the default advertised maximum frequency
adjustment value for the PTP hardware clock that is set by the driver.
These devices need to be queried when initializing the clock functionality
in order to get the maximum supported frequency adjustment value. This
value can be greater than the minimum supported frequency adjustment across
mlx5 devices (50 million ppb).
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Kirill Shutemov reported significant percpu memory consumption increase after
booting in 288-cpu VM ([1]) due to commit 41a5db8d81 ("bpf: Add support for
non-fix-size percpu mem allocation"). The percpu memory consumption is
increased from 111MB to 969MB. The number is from /proc/meminfo.
I tried to reproduce the issue with my local VM which at most supports upto
255 cpus. With 252 cpus, without the above commit, the percpu memory
consumption immediately after boot is 57MB while with the above commit the
percpu memory consumption is 231MB.
This is not good since so far percpu memory from bpf memory allocator is not
widely used yet. Let us change pre-allocation in init stage to on-demand
allocation when verifier detects there is a need of percpu memory for bpf
program. With this change, percpu memory consumption after boot can be reduced
signicantly.
[1] https://lore.kernel.org/lkml/20231109154934.4saimljtqx625l3v@box.shutemov.name/
Fixes: 41a5db8d81 ("bpf: Add support for non-fix-size percpu mem allocation")
Reported-and-tested-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20231111013928.948838-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The quotes symbol in
"EEE "link partner ability 1
should be at the end of the register name
"EEE link partner ability 1"
Signed-off-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2b8272ff4a ("cpu/hotplug: Prevent self deadlock on CPU hot-unplug")
solved the straight forward CPU hotplug deadlock vs. the scheduler
bandwidth timer. Yu discovered a more involved variant where a task which
has a bandwidth timer started on the outgoing CPU holds a lock and then
gets throttled. If the lock required by one of the CPU hotplug callbacks
the hotplug operation deadlocks because the unthrottling timer event is not
handled on the dying CPU and can only be recovered once the control CPU
reaches the hotplug state which pulls the pending hrtimers from the dead
CPU.
Solve this by pushing the hrtimers away from the dying CPU in the dying
callbacks. Nothing can queue a hrtimer on the dying CPU at that point because
all other CPUs spin in stop_machine() with interrupts disabled and once the
operation is finished the CPU is marked offline.
Reported-by: Yu Liao <liaoyu15@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Liu Tie <liutie4@huawei.com>
Link: https://lore.kernel.org/r/87a5rphara.ffs@tglx
Pull probes fixes from Masami Hiramatsu:
- Documentation update: Add a note about argument and return value
fetching is the best effort because it depends on the type.
- objpool: Fix to make internal global variables static in
test_objpool.c.
- kprobes: Unify kprobes_exceptions_nofify() prototypes. There are the
same prototypes in asm/kprobes.h for some architectures, but some of
them are missing the prototype and it causes a warning. So move the
prototype into linux/kprobes.h.
- tracing: Fix to check the tracepoint event and return event at
parsing stage. The tracepoint event doesn't support %return but if
$retval exists, it will be converted to %return silently. This finds
that case and rejects it.
- tracing: Fix the order of the descriptions about the parameters of
__kprobe_event_gen_cmd_start() to be consistent with the argument
list of the function.
* tag 'probes-fixes-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Fix the order of argument descriptions
tracing: fprobe-event: Fix to check tracepoint event and return
kprobes: unify kprobes_exceptions_nofify() prototypes
lib: test_objpool: make global variables static
Documentation: tracing: Add a note about argument and retval access
Pull spi fixes from Mark Brown:
"A couple of fixes that came in during the merge window: one Kconfig
dependency fix and another fix for a long standing issue where a sync
transfer races with system suspend"
* tag 'spi-fix-v6.7-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: Fix null dereference on suspend
spi: spi-zynq-qspi: add spi-mem to driver kconfig dependencies
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix broken cache-flush support for Micron eMMCs
- Revert 'mmc: core: Capture correct oemid-bits for eMMC cards'
MMC host:
- sdhci_am654: Fix TAP value parsing for legacy speed mode
- sdhci-pci-gli: Fix support for ASPM mode for GL9755/GL9750
- vub300: Fix an error path in probe"
* tag 'mmc-v6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-pci-gli: GL9750: Mask the replay timer timeout of AER
mmc: sdhci-pci-gli: GL9755: Mask the replay timer timeout of AER
Revert "mmc: core: Capture correct oemid-bits for eMMC cards"
mmc: vub300: fix an error code
mmc: Add quirk MMC_QUIRK_BROKEN_CACHE_FLUSH for Micron eMMC Q2J54A
mmc: sdhci_am654: fix start loop index for TAP value parsing
Pull pwm fixes from Thierry Reding:
"This contains two very small fixes that I failed to include in the
main pull request"
* tag 'pwm/for-6.7-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: Fix double shift bug
pwm: samsung: Fix a bit test in pwm_samsung_resume()
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- nvme keyring config compile fixes (Hannes and Arnd)
- fabrics keep alive fixes (Hannes)
- tcp authentication fixes (Mark)
- io_uring_cmd error handling fix (Anuj)
- stale firmware attribute fix (Daniel)
- tcp memory leak (Christophe)
- crypto library usage simplification (Eric)
- nbd use-after-free fix. May need a followup, but at least it's better
than what it was before (Li)
- Rate limit write on read-only device warnings (Yu)
* tag 'block-6.7-2023-11-10' of git://git.kernel.dk/linux:
nvme: keyring: fix conditional compilation
nvme: common: make keyring and auth separate modules
blk-core: use pr_warn_ratelimited() in bio_check_ro()
nbd: fix uaf in nbd_open
nvme: start keep-alive after admin queue setup
nvme-loop: always quiesce and cancel commands before destroying admin q
nvme-tcp: avoid open-coding nvme_tcp_teardown_admin_queue()
nvme-auth: always set valid seq_num in dhchap reply
nvme-auth: add flag for bi-directional auth
nvme-auth: auth success1 msg always includes resp
nvme: fix error-handling for io_uring nvme-passthrough
nvme: update firmware version after commit
nvme-tcp: Fix a memory leak
nvme-auth: use crypto_shash_tfm_digest()
Pull dma-mapping fixes from Christoph Hellwig:
- don't leave pages decrypted for DMA in encrypted memory setups linger
around on failure (Petr Tesarik)
- fix an out of bounds access in the new dynamic swiotlb code (Petr
Tesarik)
- fix dma_addressing_limited for systems with weird physical memory
layouts (Jia He)
* tag 'dma-mapping-6.7-2023-11-10' of git://git.infradead.org/users/hch/dma-mapping:
swiotlb: fix out-of-bounds TLB allocations with CONFIG_SWIOTLB_DYNAMIC
dma-mapping: fix dma_addressing_limited() if dma_range_map can't cover all system RAM
dma-mapping: move dma_addressing_limited() out of line
swiotlb: do not free decrypted pages if dynamic
Pull lsm updates from Paul Moore:
"We've got two small patches to correct the default return
value of two LSM hooks: security_vm_enough_memory_mm() and
security_inode_getsecctx()"
* tag 'lsm-pr-20231109' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
lsm: fix default return value for inode_getsecctx
lsm: fix default return value for vm_enough_memory
Pull ceph updates from Ilya Dryomov:
- support for idmapped mounts in CephFS (Christian Brauner, Alexander
Mikhalitsyn).
The series was originally developed by Christian and later picked up
and brought over the finish line by Alexander, who also contributed
an enabler on the MDS side (separate owner_{u,g}id fields on the
wire).
The required exports for mnt_idmap_{get,put}() in VFS have been acked
by Christian and received no objection from Christoph.
- a churny change in CephFS logging to include cluster and client
identifiers in log and debug messages (Xiubo Li).
This would help in scenarios with dozens of CephFS mounts on the same
node which are getting increasingly common, especially in the
Kubernetes world.
* tag 'ceph-for-6.7-rc1' of https://github.com/ceph/ceph-client:
ceph: allow idmapped mounts
ceph: allow idmapped atomic_open inode op
ceph: allow idmapped set_acl inode op
ceph: allow idmapped setattr inode op
ceph: pass idmap to __ceph_setattr
ceph: allow idmapped permission inode op
ceph: allow idmapped getattr inode op
ceph: pass an idmapping to mknod/symlink/mkdir
ceph: add enable_unsafe_idmap module parameter
ceph: handle idmapped mounts in create_request_message()
ceph: stash idmapping in mdsc request
fs: export mnt_idmap_get/mnt_idmap_put
libceph, ceph: move mdsmap.h to fs/ceph
ceph: print cluster fsid and client global_id in all debug logs
ceph: rename _to_client() to _to_fs_client()
ceph: pass the mdsc to several helpers
libceph: add doutc and *_client debug macros support
Pull MIPS updates from Thomas Bogendoerfer:
- removed AR7 platform support
- cleanups and fixes
* tag 'mips_6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: AR7: remove platform
watchdog: ar7_wdt: remove driver to prepare for platform removal
vlynq: remove bus driver
mtd: parsers: ar7: remove support
serial: 8250: remove AR7 support
arch: mips: remove ReiserFS from defconfig
MIPS: lantiq: Remove unnecessary include of <linux/of_irq.h>
MIPS: lantiq: Fix pcibios_plat_dev_init() "no previous prototype" warning
MIPS: KVM: Fix a build warning about variable set but not used
MIPS: Remove dead code in relocate_new_kernel
mips: dts: ralink: mt7621: rename to GnuBee GB-PC1 and GnuBee GB-PC2
mips: dts: ralink: mt7621: define each reset as an item
mips: dts: ingenic: Remove unneeded probe-type properties
MIPS: loongson32: Remove dma.h and nand.h
The kernel supports a minimum GCC version of 5.1.0 for building. However,
the "__diag_ignore_all" directive only suppresses the
"-Wmissing-prototypes" warning for GCC versions >= 8.0.0. As a result, when
building the kernel with older GCC versions, warnings may be triggered. The
example below illustrates the warnings reported by the kernel test robot
using GCC 7.5.0:
compiler: gcc-7 (Ubuntu 7.5.0-6ubuntu2) 7.5.0
All warnings (new ones prefixed by >>):
kernel/bpf/helpers.c:1893:19: warning: no previous prototype for 'bpf_obj_new_impl' [-Wmissing-prototypes]
__bpf_kfunc void *bpf_obj_new_impl(u64 local_type_id__k, void *meta__ign)
^~~~~~~~~~~~~~~~
kernel/bpf/helpers.c:1907:19: warning: no previous prototype for 'bpf_percpu_obj_new_impl' [-Wmissing-prototypes]
__bpf_kfunc void *bpf_percpu_obj_new_impl(u64 local_type_id__k, void *meta__ign)
[...]
To address this, we should also suppress the "-Wmissing-prototypes" warning
for older GCC versions. "#pragma GCC diagnostic push" is supported as
of GCC 4.6, and both "-Wmissing-prototypes" and "-Wmissing-declarations"
are supported for all the GCC versions that we currently support.
Therefore, it is reasonable to suppress these warnings for all supported
GCC versions.
With this adjustment, it's important to note that after implementing
"__diag_ignore_all", it will effectively suppress warnings for all the
supported GCC versions.
In the future, if you wish to suppress warnings that are only supported on
higher GCC versions, it is advisable to explicitly use "__diag_ignore" to
specify the GCC version you are targeting.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202311031651.A7crZEur-lkp@intel.com/
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Cc: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20231106031802.4188-1-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
A race condition exists where a synchronous (noqueue) transfer can be
active during a system suspend. This can cause a null pointer
dereference exception to occur when the system resumes.
Example order of events leading to the exception:
1. spi_sync() calls __spi_transfer_message_noqueue() which sets
ctlr->cur_msg
2. Spi transfer begins via spi_transfer_one_message()
3. System is suspended interrupting the transfer context
4. System is resumed
6. spi_controller_resume() calls spi_start_queue() which resets cur_msg
to NULL
7. Spi transfer context resumes and spi_finalize_current_message() is
called which dereferences cur_msg (which is now NULL)
Wait for synchronous transfers to complete before suspending by
acquiring the bus mutex and setting/checking a suspend flag.
Signed-off-by: Mark Hasemeyer <markhas@chromium.org>
Link: https://lore.kernel.org/r/20231107144743.v1.1.I7987f05f61901f567f7661763646cb7d7919b528@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@kernel.org
