Kalle Valo says:
====================
wireless fixes for v6.3
Third set of fixes for v6.3. mt76 has two kernel crash fixes and
adding back 160 MHz channel support for mt7915. mac80211 has fixes for
a race in transmit path and two mesh related fixes. iwlwifi also has
fixes for races.
* tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: fix mesh path discovery based on unicast packets
wifi: mac80211: fix qos on mesh interfaces
wifi: iwlwifi: mvm: protect TXQ list manipulation
wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue()
wifi: mwifiex: mark OF related data as maybe unused
wifi: mt76: connac: do not check WED status for non-mmio devices
wifi: mt76: mt7915: add back 160MHz channel width support for MT7915
wifi: mt76: do not run mt76_unregister_device() on unregistered hw
====================
Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some recent upstream debugging uncovered the fact that in
iwlwifi, the TXQ list manipulation is racy.
Introduce a new state bit for when the TXQ is completely
ready and can be used without locking, and if that's not
set yet acquire the lock to check everything correctly.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This could race if the queue is redirected while full, then
the flushing internally would start it while it's not yet
usable again. Fix it by using two state bits instead of just
one.
Reviewed-by: Benjamin Berg <benjamin.berg@intel.com>
Tested-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
It is preferred to use typed property access functions (i.e.
of_property_read_<type> functions) rather than low-level
of_get_property/of_find_property functions for reading properties.
Convert reading boolean properties to of_property_read_bool().
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for net/can
Acked-by: Kalle Valo <kvalo@kernel.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver can be compile tested with !CONFIG_OF making certain data
unused:
drivers/net/wireless/marvell/mwifiex/sdio.c:498:34: error: ‘mwifiex_sdio_of_match_table’ defined but not used [-Werror=unused-const-variable=]
drivers/net/wireless/marvell/mwifiex/pcie.c:175:34: error: ‘mwifiex_pcie_of_match_table’ defined but not used [-Werror=unused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230312132523.352182-1-krzysztof.kozlowski@linaro.org
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless and netfilter.
The notable fixes here are the EEE fix which restores boot for many
embedded platforms (real and QEMU); WiFi warning suppression and the
ICE Kconfig cleanup.
Current release - regressions:
- phy: multiple fixes for EEE rework
- wifi: wext: warn about usage only once
- wifi: ath11k: allow system suspend to survive ath11k
Current release - new code bugs:
- mlx5: Fix memory leak in IPsec RoCE creation
- ibmvnic: assign XPS map to correct queue index
Previous releases - regressions:
- netfilter: ip6t_rpfilter: Fix regression with VRF interfaces
- netfilter: ctnetlink: make event listener tracking global
- nf_tables: allow to fetch set elements when table has an owner
- mlx5:
- fix skb leak while fifo resync and push
- fix possible ptp queue fifo use-after-free
Previous releases - always broken:
- sched: fix action bind logic
- ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
uses a mutex
- netfilter: conntrack: fix rmmod double-free race
- netfilter: xt_length: use skb len to match in length_mt6, avoid
issues with BIG TCP
Misc:
- ice: remove unnecessary CONFIG_ICE_GNSS
- mlx5e: remove hairpin write debugfs files
- sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"
* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
tcp: tcp_check_req() can be called from process context
net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
xen-netback: remove unused variables pending_idx and index
net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
net: dsa: ocelot_ext: remove unnecessary phylink.h include
net: mscc: ocelot: fix duplicate driver name error
net: dsa: felix: fix internal MDIO controller resource length
net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
net/sched: act_sample: fix action bind logic
net/sched: act_mpls: fix action bind logic
net/sched: act_pedit: fix action bind logic
wifi: wext: warn about usage only once
wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
qede: avoid uninitialized entries in coal_entry array
nfc: fix memory leak of se_io context in nfc_genl_se_io
ice: remove unnecessary CONFIG_ICE_GNSS
net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
ibmvnic: Assign XPS map to correct queue index
docs: net: fix inaccuracies in msg_zerocopy.rst
tools: net: add __pycache__ to gitignore
...
Pull ARM SoC driver updates from Arnd Bergmann:
"As usual, there are lots of minor driver changes across SoC platforms
from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
These usually add support for additional chip variations in existing
drivers, but also add features or bugfixes.
The SCMI firmware subsystem gains a unified raw userspace interface
through debugfs, which can be used for validation purposes.
Newly added drivers include:
- New power management drivers for StarFive JH7110, Allwinner D1 and
Renesas RZ/V2M
- A driver for Qualcomm battery and power supply status
- A SoC device driver for identifying Nuvoton WPCM450 chips
- A regulator coupler driver for Mediatek MT81xxv"
* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
power: supply: Introduce Qualcomm PMIC GLINK power supply
soc: apple: rtkit: Do not copy the reg state structure to the stack
soc: sunxi: SUN20I_PPU should depend on PM
memory: renesas-rpc-if: Remove redundant division of dummy
soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
MAINTAINERS: Update qcom CPR maintainer entry
dt-bindings: firmware: document Qualcomm SM8550 SCM
dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
soc: qcom: socinfo: Add support for new field in revision 17
soc: qcom: smd-rpm: Add IPQ9574 compatible
soc: qcom: pmic_glink: remove redundant calculation of svid
soc: qcom: stats: Populate all subsystem debugfs files
dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
soc: qcom: pmic_glink: Introduce altmode support
...
Pull iommu updates from Joerg Roedel:
- Consolidate iommu_map/unmap functions.
There have been blocking and atomic variants so far, but that was
problematic as this approach does not scale with required new
variants which just differ in the GFP flags used. So Jason
consolidated this back into single functions that take a GFP
parameter.
- Retire the detach_dev() call-back in iommu_ops
- Arm SMMU updates from Will:
- Device-tree binding updates:
- Cater for three power domains on SM6375
- Document existing compatible strings for Qualcomm SoCs
- Tighten up clocks description for platform-specific
compatible strings
- Enable Qualcomm workarounds for some additional platforms that
need them
- Intel VT-d updates from Lu Baolu:
- Add Intel IOMMU performance monitoring support
- Set No Execute Enable bit in PASID table entry
- Two performance optimizations
- Fix PASID directory pointer coherency
- Fix missed rollbacks in error path
- Cleanups
- Apple t8110 DART support
- Exynos IOMMU:
- Implement better fault handling
- Error handling fixes
- Renesas IPMMU:
- Add device tree bindings for r8a779g0
- AMD IOMMU:
- Various fixes for handling on SNP-enabled systems and
handling of faults with unknown request-ids
- Cleanups and other small fixes
- Various other smaller fixes and cleanups
* tag 'iommu-updates-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (71 commits)
iommu/amd: Skip attach device domain is same as new domain
iommu: Attach device group to old domain in error path
iommu/vt-d: Allow to use flush-queue when first level is default
iommu/vt-d: Fix PASID directory pointer coherency
iommu/vt-d: Avoid superfluous IOTLB tracking in lazy mode
iommu/vt-d: Fix error handling in sva enable/disable paths
iommu/amd: Improve page fault error reporting
iommu/amd: Do not identity map v2 capable device when snp is enabled
iommu: Fix error unwind in iommu_group_alloc()
iommu/of: mark an unused function as __maybe_unused
iommu: dart: DART_T8110_ERROR range should be 0 to 5
iommu/vt-d: Enable IOMMU perfmon support
iommu/vt-d: Add IOMMU perfmon overflow handler support
iommu/vt-d: Support cpumask for IOMMU perfmon
iommu/vt-d: Add IOMMU perfmon support
iommu/vt-d: Support Enhanced Command Interface
iommu/vt-d: Retrieve IOMMU perfmon capability information
iommu/vt-d: Support size of the register set in DRHD
iommu/vt-d: Set No Execute Enable bit in PASID table entry
iommu/vt-d: Remove sva from intel_svm_dev
...
When ath11k runs into internal errors upon suspend,
it returns an error code to pci_pm_suspend, which
aborts the entire system suspend.
The driver should not abort system suspend, but should
keep its internal errors to itself, and allow the system
to suspend. Otherwise, a user can suspend a laptop
by closing the lid and sealing it into a case, assuming
that is will suspend, rather than heating up and draining
the battery when in transit.
In practice, the ath11k device seems to have plenty of transient
errors, and subsequent suspend cycles after this failure
often succeed.
https://bugzilla.kernel.org/show_bug.cgi?id=216968
Fixes: d1b0c33850 ("ath11k: implement suspend for QCA6390 PCI devices")
Signed-off-by: Len Brown <len.brown@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230201183201.14431-1-len.brown@intel.com
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
rtl8xxxu now unconditionally uses LEDS_CLASS, so a Kconfig dependency
is required to avoid link errors:
aarch64-linux-ld: drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.o: in function `rtl8xxxu_disconnect':
rtl8xxxu_core.c:(.text+0x730): undefined reference to `led_classdev_unregister'
ERROR: modpost: "led_classdev_unregister" [drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko] undefined!
ERROR: modpost: "led_classdev_register_ext" [drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.ko] undefined!
Fixes: 3be0162299 ("wifi: rtl8xxxu: Register the LED and make it blink")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230217095910.2480356-1-arnd@kernel.org
Use power state to decide whether we can enter or leave IPS accurately,
and then prevent to power on/off twice.
The commit 6bf3a08340 ("wifi: rtw88: add flag check before enter or leave IPS")
would like to prevent this as well, but it still can't entirely handle all
cases. The exception is that WiFi gets connected and does suspend/resume,
it will power on twice and cause it failed to power on after resuming,
like:
rtw_8723de 0000:03:00.0: failed to poll offset=0x6 mask=0x2 value=0x2
rtw_8723de 0000:03:00.0: mac power on failed
rtw_8723de 0000:03:00.0: failed to power on mac
rtw_8723de 0000:03:00.0: leave idle state failed
rtw_8723de 0000:03:00.0: failed to leave ips state
rtw_8723de 0000:03:00.0: failed to leave idle state
rtw_8723de 0000:03:00.0: failed to send h2c command
To fix this, introduce new flag RTW_FLAG_POWERON to reflect power state,
and call rtw_mac_pre_system_cfg() to configure registers properly between
power-off/-on.
Reported-by: Paul Gover <pmw.gover@yahoo.co.uk>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217016
Fixes: 6bf3a08340 ("wifi: rtw88: add flag check before enter or leave IPS")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230216053633.20366-1-pkshih@realtek.com
The current mac80211 mesh A-MSDU receive path fails to parse A-MSDU packets
on mesh interfaces, because it assumes that the Mesh Control field is always
directly after the 802.11 header.
802.11-2020 9.3.2.2.2 Figure 9-70 shows that the Mesh Control field is
actually part of the A-MSDU subframe header.
This makes more sense, since it allows packets for multiple different
destinations to be included in the same A-MSDU, as long as RA and TID are
still the same.
Another issue is the fact that the A-MSDU subframe length field was apparently
accidentally defined as little-endian in the standard.
In order to fix this, the mesh forwarding path needs happen at a different
point in the receive path.
ieee80211_data_to_8023_exthdr is changed to ignore the mesh control field
and leave it in after the ethernet header. This also affects the source/dest
MAC address fields, which now in the case of mesh point to the mesh SA/DA.
ieee80211_amsdu_to_8023s is changed to deal with the endian difference and
to add the Mesh Control length to the subframe length, since it's not covered
by the MSDU length field.
With these changes, the mac80211 will get the same packet structure for
converted regular data packets and unpacked A-MSDU subframes.
The mesh forwarding checks are now only performed after the A-MSDU decap.
For locally received packets, the Mesh Control header is stripped away.
For forwarded packets, a new 802.11 header gets added.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20230213100855.34315-4-nbd@nbd.name
[fix fortify build error]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support to offload OWE processing to user space for MLD AP when
driver's SME in use.
Add new parameters in struct cfg80211_update_owe_info to provide below
information in cfg80211_update_owe_info_event() call:
- MLO link ID of the AP, with which station requested (re)association.
This is applicable for both MLO and non-MLO station connections when
the AP affiliated with an MLD.
- Station's MLD address if the connection is MLO capable.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Link: https://lore.kernel.org/r/20230126143256.960563-3-quic_vjakkam@quicinc.com
[reformat the trace event macro]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
ath.git patches for v6.3. Major changes:
ath12k
* new driver for Qualcomm Wi-Fi 7 devices
ath11k
* IPQ5018 support
* Fine Timing Measurement (FTM) responder role support
* channel 177 support
ath10k
* store WLAN firmware version in SMEM image table
Type of txdw7 is __le16, so assign __le32 is wrong. Also, the
TXDESC_ANTENNA_SELECT_C is defined for __le32, so shift 16 bits to fit
the value. Compile test only.
sparse warnings: (new ones prefixed by >>)
>> rtl8xxxu_core.c:5198:24: sparse: sparse: invalid assignment: |=
>> rtl8xxxu_core.c:5198:24: sparse: left side has type restricted __le16
>> rtl8xxxu_core.c:5198:24: sparse: right side has type restricted __le32
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119113146.9640-1-pkshih@realtek.com
If the chip can have an LED, register a struct led_classdev and enable
hardware-controlled blinking. When the chip is not transmitting or
receiving anything the LED is off. Otherwise the LED will blink
faster or slower according to the throughput.
The LED can be controlled from userspace by writing 0, 1, or 2 to
/sys/class/leds/rtl8xxxu-usbX-Y/brightness:
0 - solid off.
1 - solid on.
2 - hardware-controlled blinking.
In this patch none of the chips advertise having an LED. That will be
added in the next patches.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/b8235bca-60c3-d0fe-a958-53c6dd3ba3f6@gmail.com
Macros prefixed with CONFIG_ are intended to be defined only by
Kconfig scripts. Here we remove the prefix from the
CONFIG_AUTO_READ_MODE define to avoid confusion when reading the code.
This causes no change to functionality.
Signed-off-by: Peter Lafreniere <peter@n8pjl.ca>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230118185353.2422-1-peter@n8pjl.ca
In path of setting channel and setting TX power, the rtw89_chan instance
to be used is controlled by top and passed down. The set_tx_shape_dfir()
is in path of setting TX power, so it should use the passed rtw89_chan
instead of querying it itself. Otherwise, it might encounter mismatch
between parameters if multi-channel.
For example,
rtw89_8852ce 0000:04:00.0: set tx shape dfir by unknown ch: 155 on 2GHz
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230201032057.7349-1-pkshih@realtek.com
New firmware type NORMAL_CE is introduced to support P2P-PS and hardware
scan, but no LPS-PG mode. After this patch, old firmware with NORMAL type
can still work well.
The use of this new type is the same as before, so we add new type to
avoid taking wrong firmware. Then, driver log can also give clear
information about this change:
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-7-pkshih@realtek.com
For different firmware type, it could use different IDMEM mode, so reset
it to default to avoid encountering error during we bisect firmware
version, like
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 5
rtw89_8852be 0000:03:00.0: Firmware version 0.29.26.0, cmd version 0, type 3
rtw89_8852be 0000:03:00.0: fw security fail
rtw89_8852be 0000:03:00.0: download firmware fail
rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x1E0 = 0x62
rtw89_8852be 0000:03:00.0: [ERR]fwdl 0x83F2 = 0x8
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931150
rtw89_8852be 0000:03:00.0: [ERR]fw PC = 0xb8931154
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-5-pkshih@realtek.com
Driver can prepare pkt_list for firmware that only uses them to send out
the packets in specific situations. To understand the usage of current
status, and to check if there is leakage problem, dump bitmap and the
indices used by certain function.
An example looks like:
map:
...
pkt_ofld: 3f 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...
[SCAN 0]: 3
[SCAN 1]: 4
[SCAN 3]: 5
VIF [0] xx:xx:xx:xx:xx:xx
...
pkt_ofld[GENERAL]: 0 1 2
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-4-pkshih@realtek.com
For upcoming firmware, driver needs to do packet offload to firmware to
ensure LPS protocol work properly, so we update current connection and
disconnect flow to maintain packet offload flow, and integrate with
current WoWLAN flow which also needs packet offload.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230123065401.14174-3-pkshih@realtek.com
To debug channel concurrency more centrally, we add a new debug flag,
RTW89_DBG_CHAN, for channel related things, especially channel concurrency.
Then, we change MCC (multi-channel concurrency) C2H (chip to host packets)
debug flag to it.
Besides, refine debug logs to show TSF in u64 directly.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20230119064342.65391-2-pkshih@realtek.com
