Pull bcachefs fixes from Kent Overstreet:
"Usual set of small fixes/logging improvements.
One bigger user reported fix, for inode <-> dirent inconsistencies
reported in fsck, after moving a subvolume that had been snapshotted"
* tag 'bcachefs-2025-04-17' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix snapshotting a subvolume, then renaming it
bcachefs: Add missing READ_ONCE() for metadata replicas
bcachefs: snapshot_node_missing is now autofix
bcachefs: Log message when incompat version requested but not enabled
bcachefs: Print version_incompat_allowed on startup
bcachefs: Silence extent_poisoned error messages
bcachefs: btree_root_unreadable_and_scan_found_nothing now AUTOFIX
bcachefs: fix bch2_dev_usage_full_read_fast()
bcachefs: Don't print data read retry success on non-errors
bcachefs: Add missing error handling
bcachefs: Prevent granting write refs when filesystem is read-only
Subvolume roots and the dirents that point to them are special; they
don't obey the normal snapshot versioning rules because they cross
snapshot boundaries.
We don't keep around older versions of subvolume dirents on rename - we
don't need to, because subvolume dirents are only visible in the parent
subvolume, and we wouldn't be able to match up the different dirent and
inode versions due to crossing the snapshot ID boundary.
That means that when we rename a subvolume, that's been snapshotted, the
older version of the subvolume root will become dangling - it won't have
a dirent that points to it.
That's expected, we just need to tell fsck that this is ok.
Fixes: https://github.com/koverstreet/bcachefs/issues/856
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
If we race with the user changing the metadata_replicas setting, this
could cause us to get an incorrectly sized disk reservation.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
extent poisoning is partly so that we don't keep spewing the dmesg log
when we've got unreadable data - we don't want to print these.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This will likely mean that the btree had only one node - there was
nothing or almost nothing in it, and we should reconstruct and continue.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
One reference to bch_dev_usage wasn't updated, which meant we weren't
reading the full bch_dev_usage_full - oops.
Fixes: 955ba7b5ea ("bcachefs: bch_dev_usage_full")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We may end up in the data read retry path when reading cached data and
racing with invalidation, or on checksum error when we were reading into
a userspace buffer that might have been modified while the read was in
flight.
These aren't real errors, so we shouldn't print the 'retry success'
message.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Fix a shutdown WARNING in bch2_dev_free caused by active write I/O
references (ca->io_ref[WRITE]) on a device being freed.
The problem occurs when:
- The filesystem is marked read-only (BCH_FS_rw clear in c->flags).
- A subsequent operation (e.g., error handling for device removal)
incorrectly tries to grant write references back to a device.
- During final shutdown, the read-only flag causes the system to skip
stopping write I/O references (bch2_dev_io_ref_stop(ca, WRITE)).
- The leftover active write reference triggers the WARN_ON in
bch2_dev_free.
Prevent this by checking if the filesystem is read-only before
attempting to grant write references to a device in the problematic
code path. Ensure consistency between the filesystem state flag
and the device I/O reference state during shutdown.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull bcachefs fixes from Kent Overstreet:
"Mostly minor fixes.
Eric Biggers' crypto API conversion is included because of long
standing sporadic crashes - mostly, but not entirely syzbot - in the
crypto API code when calling poly1305, which have been nigh impossible
to reproduce and debug.
His rework deletes the code where we've seen the crashes, so either
it'll be a fix or we'll end up with backtraces we can debug. (Thanks
Eric!)"
* tag 'bcachefs-2025-04-10' of git://evilpiepirate.org/bcachefs:
bcachefs: Use sort_nonatomic() instead of sort()
bcachefs: Remove unnecessary softdep on xxhash
bcachefs: use library APIs for ChaCha20 and Poly1305
bcachefs: Fix duplicate "ro,read_only" in opts at startup
bcachefs: Fix UAF in bchfs_read()
bcachefs: Use cpu_to_le16 for dirent lengths
bcachefs: Fix type for parameter in journal_advance_devs_to_next_bucket
bcachefs: Fix escape sequence in prt_printf
Pull CRC cleanups from Eric Biggers:
"Finish cleaning up the CRC kconfig options by removing the remaining
unnecessary prompts and an unnecessary 'default y', removing
CONFIG_LIBCRC32C, and documenting all the CRC library options"
* tag 'crc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiggers/linux:
lib/crc: remove CONFIG_LIBCRC32C
lib/crc: document all the CRC library kconfig options
lib/crc: remove unnecessary prompt for CONFIG_CRC_ITU_T
lib/crc: remove unnecessary prompt for CONFIG_CRC_T10DIF
lib/crc: remove unnecessary prompt for CONFIG_CRC16
lib/crc: remove unnecessary prompt for CONFIG_CRC_CCITT
lib/crc: remove unnecessary prompt for CONFIG_CRC32 and drop 'default y'
Fixes "task out to lunch" warnings during recovery on large machines
with lots of dirty data in the journal.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
As with the other algorithms, bcachefs does not access xxhash through
the crypto API. So there is no need to use a module softdep to ensure
that it is loaded.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Just use the ChaCha20 and Poly1305 libraries instead of the clunky
crypto API. This is much simpler. It is also slightly faster, since
the libraries provide more direct access to the same
architecture-optimized ChaCha20 and Poly1305 code.
I've tested that existing encrypted bcachefs filesystems can be continue
to be accessed with this patch applied.
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Commit 3ba0240a87 fixed a bug in the read retry path in __bch2_read(),
and changed bchfs_read() to match - to avoid a landmine if
bch2_read_extent() ever starts returning transaction restarts.
But that was incorrect, because bchfs_read() doesn't use a separate
stack allocated bvec_iter, it uses the one in the rbio being submitted.
Add a comment explaining the issue, and revert the buggy change.
Fixes: 3ba0240a87 ("bcachefs: Fix silent short reads in data read retry path")
Reported-by: syzbot+2deb10b8dc9aae6fab67@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Replace u64 with __le64 to match the expected parameter type. Ensure consistency both in function calls and within the function itself.
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
timer_delete[_sync]() replaces del_timer[_sync](). Convert the whole tree
over and remove the historical wrapper inlines.
Conversion was done with coccinelle plus manual fixups where necessary.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Pull more bcachefs updates from Kent Overstreet:
"More notable fixes:
- Fix for striping behaviour on tiering filesystems where replicas
exceeds durability on destination target
- Fix a race in device removal where deleting alloc info races with
the discard worker
- Some small stack usage improvements: this is just enough for KMSAN
builds to not blow the stack, more is queued up for 6.16"
* tag 'bcachefs-2025-04-03' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix "journal stuck" during recovery
bcachefs: backpointer_get_key: check for null from peek_slot()
bcachefs: Fix null ptr deref in invalidate_one_bucket()
bcachefs: Fix check_snapshot_exists() restart handling
bcachefs: use nonblocking variant of print_string_as_lines in error path
bcachefs: Fix scheduling while atomic from logging changes
bcachefs: Add error handling for zlib_deflateInit2()
bcachefs: add missing selection of XARRAY_MULTI
bcachefs: bch_dev_usage_full
bcachefs: Kill btree_iter.trans
bcachefs: do_trace_key_cache_fill()
bcachefs: Split up bch_dev.io_ref
bcachefs: fix ref leak in btree_node_read_all_replicas
bcachefs: Fix null ptr deref in bch2_write_endio()
bcachefs: Fix field spanning write warning
bcachefs: Fix striping behaviour
If we crash when the journal pin fifo is completely full - i.e. we're
at the maximum number of dirty journal entries - that may put us in a
sticky situation in recovery, as journal replay will need to be able to
open new journal entries in order to get going.
bch2_fs_journal_start() already had provisions for resizing the journal
pin fifo if needed, but it needs a fudge factor to ensure there's room
for journal replay.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
peek_slot() doesn't normally return bkey_s_c_null - except when we ask
for a key at a btree level that doesn't exist, which can happen here.
We might want to revisit this, but we'll have to look over all the
places where we use peek_slot() on interior nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Codepaths that create entries in the snapshots btree currently call
bch2_mark_snapshot(), which updates the in-memory snapshot table, before
transaction commit.
This is because bch2_mark_snapshot() is an atomic trigger, run with
btree write locks held, and isn't allowed to fail - but it might need to
reallocate the table, hence we call it early when we're still allowed to
fail.
This is generally harmless - if we fail, we'll have left an entry in the
snapshots table around, but nothing will reference it and it'll get
overwritten if reused by another transaction.
But check_snapshot_exists(), which reconstructs snapshots when the
snapshots btree has been corrupted or lost, was erronously rechecking if
the snapshot exists inside the transaction commit loop - so on
transaction restart (in this case mem_realloced), the second iteration
would return without repairing.
This code needs some cleanup: splitting out a "maybe realloc snapshots
table" helper would have avoided this, that will be in the next patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The inconsistency error path calls print_string_as_lines, which calls
console_lock, which is a potentially-sleeping function and so can't be
called in an atomic context.
Replace calls to it with the nonblocking variant which is safe to call.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Two fixes from the recent logging changes:
bch2_inconsistent(), bch2_fs_inconsistent() be called from interrupt
context, or with rcu_read_lock() held.
The one syzbot found is in
bch2_bkey_pick_read_device
bch2_dev_rcu
bch2_fs_inconsistent
We're starting to switch to lift the printbufs up to higher levels so we
can emit better log messages and print them all in one go (avoid
garbling), so that conversion will help with spotting these in the
future; when we declare a printbuf it must be flagged if we're in an
atomic context.
Secondly, in btree_node_write_endio:
00085 BUG: sleeping function called from invalid context at include/linux/sched/mm.h:321
00085 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 618, name: bch-reclaim/fa6
00085 preempt_count: 10001, expected: 0
00085 RCU nest depth: 0, expected: 0
00085 4 locks held by bch-reclaim/fa6/618:
00085 #0: ffffff80d7ccad68 (&j->reclaim_lock){+.+.}-{4:4}, at: bch2_journal_reclaim_thread+0x84/0x198
00085 #1: ffffff80d7c84218 (&c->btree_trans_barrier){.+.+}-{0:0}, at: __bch2_trans_get+0x1c0/0x440
00085 #2: ffffff80cd3f8140 (bcachefs_btree){+.+.}-{0:0}, at: __bch2_trans_get+0x22c/0x440
00085 #3: ffffff80c3823c20 (&vblk->vqs[i].lock){-.-.}-{3:3}, at: virtblk_done+0x58/0x130
00085 irq event stamp: 328
00085 hardirqs last enabled at (327): [<ffffffc080073a14>] finish_task_switch.isra.0+0xbc/0x2a0
00085 hardirqs last disabled at (328): [<ffffffc080971a10>] el1_interrupt+0x20/0x60
00085 softirqs last enabled at (0): [<ffffffc08002f920>] copy_process+0x7c8/0x2118
00085 softirqs last disabled at (0): [<0000000000000000>] 0x0
00085 Preemption disabled at:
00085 [<ffffffc08003ada0>] irq_enter_rcu+0x18/0x90
00085 CPU: 8 UID: 0 PID: 618 Comm: bch-reclaim/fa6 Not tainted 6.14.0-rc6-ktest-g04630bde23e8 #18798
00085 Hardware name: linux,dummy-virt (DT)
00085 Call trace:
00085 show_stack+0x1c/0x30 (C)
00085 dump_stack_lvl+0x84/0xc0
00085 dump_stack+0x14/0x20
00085 __might_resched+0x180/0x288
00085 __might_sleep+0x4c/0x88
00085 __kmalloc_node_track_caller_noprof+0x34c/0x3e0
00085 krealloc_noprof+0x1a0/0x2d8
00085 bch2_printbuf_make_room+0x9c/0x120
00085 bch2_prt_printf+0x60/0x1b8
00085 btree_node_write_endio+0x1b0/0x2d8
00085 bio_endio+0x138/0x1f0
00085 btree_node_write_endio+0xe8/0x2d8
00085 bio_endio+0x138/0x1f0
00085 blk_update_request+0x220/0x4c0
00085 blk_mq_end_request+0x28/0x148
00085 virtblk_request_done+0x64/0xe8
00085 blk_mq_complete_request+0x34/0x40
00085 virtblk_done+0x78/0x130
00085 vring_interrupt+0x6c/0xb0
00085 __handle_irq_event_percpu+0x8c/0x2e0
00085 handle_irq_event+0x50/0xb0
00085 handle_fasteoi_irq+0xc4/0x250
00085 handle_irq_desc+0x44/0x60
00085 generic_handle_domain_irq+0x20/0x30
00085 gic_handle_irq+0x54/0xc8
00085 call_on_irq_stack+0x24/0x40
Reported-by: syzbot+c82cd2906e2f192410bb@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In attempt_compress(), the return value of zlib_deflateInit2() needs to be
checked. A proper implementation can be found in pstore_compress().
Add an error check and return 0 immediately if the initialzation fails.
Fixes: 986e9842fb ("bcachefs: Compression levels")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
When CONFIG_XARRAY_MULTI is not set, reading from a bcachefs file hits
the 'BUG_ON(order > 0);' in xas_set_order(), because it tries to insert
a large folio in the page cache. Fix this by making bcachefs select
XARRAY_MULTI.
Fixes: be212d86b1 ("bcachefs: bs > ps support")
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
All the fastpaths that need device usage don't need the sector totals or
fragmentation, just bucket counts.
Split bch_dev_usage up into two different versions, the normal one with
just bucket counts.
This is also a stack usage improvement, since we have a bch_dev_usage on
the stack in the allocation path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This was planned to be done ages ago, now finally completed; there are
places where we have quite a few btree_trans objects on the stack, so
this reduces stack usage somewhat.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We now have separate per device io_refs for read and write access.
This fixes a device removal bug where the discard workers were still
running while we're removing alloc info for that device.
It's also a bit of hardening; we no longer allow writes to devices that
are read-only.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Pull MM updates from Andrew Morton:
- The series "Enable strict percpu address space checks" from Uros
Bizjak uses x86 named address space qualifiers to provide
compile-time checking of percpu area accesses.
This has caused a small amount of fallout - two or three issues were
reported. In all cases the calling code was found to be incorrect.
- The series "Some cleanup for memcg" from Chen Ridong implements some
relatively monir cleanups for the memcontrol code.
- The series "mm: fixes for device-exclusive entries (hmm)" from David
Hildenbrand fixes a boatload of issues which David found then using
device-exclusive PTE entries when THP is enabled. More work is
needed, but this makes thins better - our own HMM selftests now
succeed.
- The series "mm: zswap: remove z3fold and zbud" from Yosry Ahmed
remove the z3fold and zbud implementations. They have been deprecated
for half a year and nobody has complained.
- The series "mm: further simplify VMA merge operation" from Lorenzo
Stoakes implements numerous simplifications in this area. No runtime
effects are anticipated.
- The series "mm/madvise: remove redundant mmap_lock operations from
process_madvise()" from SeongJae Park rationalizes the locking in the
madvise() implementation. Performance gains of 20-25% were observed
in one MADV_DONTNEED microbenchmark.
- The series "Tiny cleanup and improvements about SWAP code" from
Baoquan He contains a number of touchups to issues which Baoquan
noticed when working on the swap code.
- The series "mm: kmemleak: Usability improvements" from Catalin
Marinas implements a couple of improvements to the kmemleak
user-visible output.
- The series "mm/damon/paddr: fix large folios access and schemes
handling" from Usama Arif provides a couple of fixes for DAMON's
handling of large folios.
- The series "mm/damon/core: fix wrong and/or useless damos_walk()
behaviors" from SeongJae Park fixes a few issues with the accuracy of
kdamond's walking of DAMON regions.
- The series "expose mapping wrprotect, fix fb_defio use" from Lorenzo
Stoakes changes the interaction between framebuffer deferred-io and
core MM. No functional changes are anticipated - this is preparatory
work for the future removal of page structure fields.
- The series "mm/damon: add support for hugepage_size DAMOS filter"
from Usama Arif adds a DAMOS filter which permits the filtering by
huge page sizes.
- The series "mm: permit guard regions for file-backed/shmem mappings"
from Lorenzo Stoakes extends the guard region feature from its
present "anon mappings only" state. The feature now covers shmem and
file-backed mappings.
- The series "mm: batched unmap lazyfree large folios during
reclamation" from Barry Song cleans up and speeds up the unmapping
for pte-mapped large folios.
- The series "reimplement per-vma lock as a refcount" from Suren
Baghdasaryan puts the vm_lock back into the vma. Our reasons for
pulling it out were largely bogus and that change made the code more
messy. This patchset provides small (0-10%) improvements on one
microbenchmark.
- The series "Docs/mm/damon: misc DAMOS filters documentation fixes and
improves" from SeongJae Park does some maintenance work on the DAMON
docs.
- The series "hugetlb/CMA improvements for large systems" from Frank
van der Linden addresses a pile of issues which have been observed
when using CMA on large machines.
- The series "mm/damon: introduce DAMOS filter type for unmapped pages"
from SeongJae Park enables users of DMAON/DAMOS to filter my the
page's mapped/unmapped status.
- The series "zsmalloc/zram: there be preemption" from Sergey
Senozhatsky teaches zram to run its compression and decompression
operations preemptibly.
- The series "selftests/mm: Some cleanups from trying to run them" from
Brendan Jackman fixes a pile of unrelated issues which Brendan
encountered while runnimg our selftests.
- The series "fs/proc/task_mmu: add guard region bit to pagemap" from
Lorenzo Stoakes permits userspace to use /proc/pid/pagemap to
determine whether a particular page is a guard page.
- The series "mm, swap: remove swap slot cache" from Kairui Song
removes the swap slot cache from the allocation path - it simply
wasn't being effective.
- The series "mm: cleanups for device-exclusive entries (hmm)" from
David Hildenbrand implements a number of unrelated cleanups in this
code.
- The series "mm: Rework generic PTDUMP configs" from Anshuman Khandual
implements a number of preparatoty cleanups to the GENERIC_PTDUMP
Kconfig logic.
- The series "mm/damon: auto-tune aggregation interval" from SeongJae
Park implements a feedback-driven automatic tuning feature for
DAMON's aggregation interval tuning.
- The series "Fix lazy mmu mode" from Ryan Roberts fixes some issues in
powerpc, sparc and x86 lazy MMU implementations. Ryan did this in
preparation for implementing lazy mmu mode for arm64 to optimize
vmalloc.
- The series "mm/page_alloc: Some clarifications for migratetype
fallback" from Brendan Jackman reworks some commentary to make the
code easier to follow.
- The series "page_counter cleanup and size reduction" from Shakeel
Butt cleans up the page_counter code and fixes a size increase which
we accidentally added late last year.
- The series "Add a command line option that enables control of how
many threads should be used to allocate huge pages" from Thomas
Prescher does that. It allows the careful operator to significantly
reduce boot time by tuning the parallalization of huge page
initialization.
- The series "Fix calculations in trace_balance_dirty_pages() for cgwb"
from Tang Yizhou fixes the tracing output from the dirty page
balancing code.
- The series "mm/damon: make allow filters after reject filters useful
and intuitive" from SeongJae Park improves the handling of allow and
reject filters. Behaviour is made more consistent and the documention
is updated accordingly.
- The series "Switch zswap to object read/write APIs" from Yosry Ahmed
updates zswap to the new object read/write APIs and thus permits the
removal of some legacy code from zpool and zsmalloc.
- The series "Some trivial cleanups for shmem" from Baolin Wang does as
it claims.
- The series "fs/dax: Fix ZONE_DEVICE page reference counts" from
Alistair Popple regularizes the weird ZONE_DEVICE page refcount
handling in DAX, permittig the removal of a number of special-case
checks.
- The series "refactor mremap and fix bug" from Lorenzo Stoakes is a
preparatoty refactoring and cleanup of the mremap() code.
- The series "mm: MM owner tracking for large folios (!hugetlb) +
CONFIG_NO_PAGE_MAPCOUNT" from David Hildenbrand reworks the manner in
which we determine whether a large folio is known to be mapped
exclusively into a single MM.
- The series "mm/damon: add sysfs dirs for managing DAMOS filters based
on handling layers" from SeongJae Park adds a couple of new sysfs
directories to ease the management of DAMON/DAMOS filters.
- The series "arch, mm: reduce code duplication in mem_init()" from
Mike Rapoport consolidates many per-arch implementations of
mem_init() into code generic code, where that is practical.
- The series "mm/damon/sysfs: commit parameters online via
damon_call()" from SeongJae Park continues the cleaning up of sysfs
access to DAMON internal data.
- The series "mm: page_ext: Introduce new iteration API" from Luiz
Capitulino reworks the page_ext initialization to fix a boot-time
crash which was observed with an unusual combination of compile and
cmdline options.
- The series "Buddy allocator like (or non-uniform) folio split" from
Zi Yan reworks the code to split a folio into smaller folios. The
main benefit is lessened memory consumption: fewer post-split folios
are generated.
- The series "Minimize xa_node allocation during xarry split" from Zi
Yan reduces the number of xarray xa_nodes which are generated during
an xarray split.
- The series "drivers/base/memory: Two cleanups" from Gavin Shan
performs some maintenance work on the drivers/base/memory code.
- The series "Add tracepoints for lowmem reserves, watermarks and
totalreserve_pages" from Martin Liu adds some more tracepoints to the
page allocator code.
- The series "mm/madvise: cleanup requests validations and
classifications" from SeongJae Park cleans up some warts which
SeongJae observed during his earlier madvise work.
- The series "mm/hwpoison: Fix regressions in memory failure handling"
from Shuai Xue addresses two quite serious regressions which Shuai
has observed in the memory-failure implementation.
- The series "mm: reliable huge page allocator" from Johannes Weiner
makes huge page allocations cheaper and more reliable by reducing
fragmentation.
- The series "Minor memcg cleanups & prep for memdescs" from Matthew
Wilcox is preparatory work for the future implementation of memdescs.
- The series "track memory used by balloon drivers" from Nico Pache
introduces a way to track memory used by our various balloon drivers.
- The series "mm/damon: introduce DAMOS filter type for active pages"
from Nhat Pham permits users to filter for active/inactive pages,
separately for file and anon pages.
- The series "Adding Proactive Memory Reclaim Statistics" from Hao Jia
separates the proactive reclaim statistics from the direct reclaim
statistics.
- The series "mm/vmscan: don't try to reclaim hwpoison folio" from
Jinjiang Tu fixes our handling of hwpoisoned pages within the reclaim
code.
* tag 'mm-stable-2025-03-30-16-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (431 commits)
mm/page_alloc: remove unnecessary __maybe_unused in order_to_pindex()
x86/mm: restore early initialization of high_memory for 32-bits
mm/vmscan: don't try to reclaim hwpoison folio
mm/hwpoison: introduce folio_contain_hwpoisoned_page() helper
cgroup: docs: add pswpin and pswpout items in cgroup v2 doc
mm: vmscan: split proactive reclaim statistics from direct reclaim statistics
selftests/mm: speed up split_huge_page_test
selftests/mm: uffd-unit-tests support for hugepages > 2M
docs/mm/damon/design: document active DAMOS filter type
mm/damon: implement a new DAMOS filter type for active pages
fs/dax: don't disassociate zero page entries
MM documentation: add "Unaccepted" meminfo entry
selftests/mm: add commentary about 9pfs bugs
fork: use __vmalloc_node() for stack allocation
docs/mm: Physical Memory: Populate the "Zones" section
xen: balloon: update the NR_BALLOON_PAGES state
hv_balloon: update the NR_BALLOON_PAGES state
balloon_compaction: update the NR_BALLOON_PAGES state
meminfo: add a per node counter for balloon drivers
mm: remove references to folio in __memcg_kmem_uncharge_page()
...
Pull more bcachefs updates from Kent Overstreet:
"All bugfixes and logging improvements"
* tag 'bcachefs-2025-03-31' of git://evilpiepirate.org/bcachefs: (35 commits)
bcachefs: fix bch2_write_point_to_text() units
bcachefs: Log original key being moved in data updates
bcachefs: BCH_JSET_ENTRY_log_bkey
bcachefs: Reorder error messages that include journal debug
bcachefs: Don't use designated initializers for disk_accounting_pos
bcachefs: Silence errors after emergency shutdown
bcachefs: fix units in rebalance_status
bcachefs: bch2_ioctl_subvolume_destroy() fixes
bcachefs: Clear fs_path_parent on subvolume unlink
bcachefs: Change btree_insert_node() assertion to error
bcachefs: Better printing of inconsistency errors
bcachefs: bch2_count_fsck_err()
bcachefs: Better helpers for inconsistency errors
bcachefs: Consistent indentation of multiline fsck errors
bcachefs: Add an "ignore unknown" option to bch2_parse_mount_opts()
bcachefs: bch2_time_stats_init_no_pcpu()
bcachefs: Fix bch2_fs_get_tree() error path
bcachefs: fix logging in journal_entry_err_msg()
bcachefs: add missing newline in bch2_trans_updates_to_text()
bcachefs: print_string_as_lines: fix extra newline
...
This was previously hard to hit since it requires racing with device
removal, but splitting up io_ref uncovered it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
For striping across devices, we maintain "clocks", and we advance them
by the inverse of "how much free space this device has left", so that we
round robin biased in favor of devices with more free space.
This code was originally trying to do EWMA-ish stuff when originally
written, ~10 years ago, and was never properly cleaned up when it was
realized that an EWMA is not the right approach here.
That left a bug, when we rescale to keep all the clocks in the correct
range and prevent overflow.
It was assumed that we'd always be allocated from the device with the
smallest clock hand, but that's actually not correct: with the target
options, allocations will be first tried from a subset of devices, and
then the entire filesystem if that fails.
Thus, the rescale from the first allocation - allocating from a subset
of devices - can pick the wrong rescale value and cause the rest of the
clocks to go to 0, losing information.
This resuls in incorrect striping behaviour when the desired number of
replicas doesn't fit on the foreground target.
Link: https://www.reddit.com/r/bcachefs/comments/1jn3t26/replica_allocation_not_evenly_distributed_among/
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
There's something going on with the data move path; log the original key
being moved for debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Add a journal entry type for logging - but logging a bkey, not a string;
to be used for data move path debugging.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
We don't care about errors from asynchronous ops that were because we
did an emergency shutdown; silence them.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
