i.MX ARM device tree change for 6.16:
- A series from Alexander Stein that updates ls1021a-tqmals1021a device
tree mostly for display support inlcuding HDMI, LVDS and CDTech panel
- A change from Dario Binacchi to use pad config defines for i.MX23/28
device trees
- A i.MX7D change from Efe Can İçöz to include min and max voltage in
opp-microvolt
- A few patches from Fabio Estevam to fix dt-schema warnings
- A couple of changes from Krzysztof Kozlowski to align NAND and WIFI
node name with binings
- A clean-up change from Rob Herring to drop redundant CPU
"clock-latency"
* tag 'imx-dt-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: mxs: use padconfig macros
ARM: dts: imx7d: update opp-table voltages
ARM: dts: nxp: Align wifi node name with bindings
ARM: dts: imx6q-apalis: remove pcie-switch node
ARM: dts: ls1021a-tqmals1021a: change sound card model name
ARM: dts: ls1021a-tqmals1021a: Add overlay for CDTech DC44 RGB display
ARM: dts: ls1021a-tqmals1021a: Add overlay for CDTech FC21 RGB display
ARM: dts: ls1021a-tqmals1021a: Add LVDS overlay for Tianma TM070JVGH33
ARM: dts: ls1021a-tqmals1021a: Add HDMI overlay
ARM: dts: ls1021a-tqmals1021a: Add vcc-supply for spi-nor
ARM: dts: ls1021a-tqmals1021a: Fix license
ARM: dts: imx: Drop redundant CPU "clock-latency"
ARM: dts: imx51-digi-connectcore-som: Fix MMA7455 compatible
ARM: dts: nxp: Align NAND controller node name with bindings
ARM: dts: imx: Fix the iim compatible string
ARM: dts: imx31/imx6: Use flash as the NOR node name
Link: https://lore.kernel.org/r/20250512103858.50501-3-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ARM: tegra: Device tree changes for v6.16-rc1
Use standard names for the APBDMA controller device tree nodes, add
support for the ASUS Transformer Pad LTE TF300TL and clean up the Apalis
evaluation board by removing the unused pcie-switch node.
* tag 'tegra-for-6.16-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: apalis-eval: Remove pcie-switch node
ARM: tegra: Add device-tree for ASUS Transformer Pad LTE TF300TL
ARM: tegra: Rename the apbdma nodename to match with common dma-controller binding
Link: https://lore.kernel.org/r/20250509212604.2849901-2-treding@nvidia.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoC Device Tree changes
for 6.16, please pull the following:
- Arthur adds a pinctrl node for BCM21664 and updates BCM23550 to use
it, he also drops the DTS file for the BCM59056 PMU chip and leaving
that board level DTS files
- Stefan documents and adds support for the Raspberry Pi 2 2nd revision.
* tag 'arm-soc/for-6.16/devicetree' of https://github.com/Broadcom/stblinux:
arm64: dts: bcm: Add reference to RPi 2 (2nd rev)
ARM: dts: bcm: Add support for Raspberry Pi 2 (2nd rev)
dt-bindings: arm: bcm2835: Add Raspberry Pi 2 (2nd rev)
ARM: dts: Drop DTS for BCM59056 PMU
ARM: dts: bcm2166x: Add bcm2166x-pinctrl DTSI
ARM: dts: bcm2166x-common: Add pinctrl node
Link: https://lore.kernel.org/r/20250505165810.1948927-1-florian.fainelli@broadcom.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DTS updates for v6.16 (take two)
- Add CANFD support for the RZ/G3E SoC and the RZ/G3E SMARC Carrier-II
EVK development board,
- Add support for Ethernet port A, 9-pin D-sub serial, and USB on the
RZN1D-DB and RZN1D-EB development and expansion boards,
- Add sound support for the Retronix Sparrow Hawk board,
- Add General PWM Timer (GPT) support for the RZ/G2L and RZ/V2L SoCs
and SMARC EVK boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.16-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Enable USB host port
ARM: dts: renesas: r9a06g032-rzn1d400-db: Add pinmux for the CPLD
arm64: dts: renesas: white-hawk-single: Improve Ethernet TSN description
ARM: dts: renesas: r9a06g032-rzn1d400-db: Enable USB device port
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Describe 9-pin D-sub serial port
arm64: dts: renesas: beacon-renesom: Align wifi node name with bindings
arm64: dts: renesas: rzg2l-smarc: Enable GPT on carrier board
arm64: dts: renesas: r9a07g054: Add GPT support
arm64: dts: renesas: r9a07g044: Add GPT support
arm64: dts: renesas: sparrow-hawk: Add MSIOF Sound support
ARM: dts: renesas: r9a06g032-rzn1d400-eb: Add GMAC1 port
arm64: dts: renesas: r9a09g047e57-smarc: Enable CAN Transceiver
arm64: dts: renesas: r9a09g047e57-smarc: Enable CANFD
arm64: dts: renesas: r9a09g047: Add CANFD node
Link: https://lore.kernel.org/r/cover.1746798755.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Update accepted voltage levels according to IMX7DCEC Table 9 Operating ranges
Signed-off-by: Efe Can İçöz <efecanicoz@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Since commit 3c3606793f ("dt-bindings: wireless: bcm4329-fmac: Use
wireless-controller.yaml schema"), bindings expect 'wifi' as node name:
imx7d-remarkable2.dtb: bcrmf@1: $nodename:0: 'bcrmf@1' does not match '^wifi(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This reverts commit 1580ccb6ed.
The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF.
Without the polarity configuration in GRF, it can be observed from
the HDMI protocol analyzer that the H/V front/back timing output
by RK3036 HDMI are currently not in line with the specifications.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin
Link: https://lore.kernel.org/r/20250422070455.432666-7-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The compatible "plx,pex8605" does not exist, there is no DT binding for
it and there was never a driver matching this compatible, remove it.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The card name for ALSA is generated from the model name string and
is limited to 16 characters. Use a shorter name to prevent cutting the
name.
MBLS1021A uses the same audio codec as most i.MX based starter kits
by TQ-Systems. Adjust the sound card model to i.MX based platforms,
as done by commit e6303798b6 ("arm64: dts: imx8mp-tqma8mpql-mba8mpxl:
change sound card model name"). This allows sharing a default asound.conf
in BSP over all the kits.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds an overlay for the supported LVDS display tianma tm070jvhg33.
The on-board RGB-to-LVDS encoder and DCU graphics chain are configured
accordingly. Add power supply as well, which had been missing all the time.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This add an overlay for using the RGB-to-HDMI bridge.
Note: As DDC is directly connected to general I2C bus, there might be I2C
address conflicts. Hence not all displays might work.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
With commit 784bdc6f26 ("ARM: dts: ls1021a: change to use SPDX
identifiers") the SoC .dtsi specifies the license using SPDX tags.
Fix license according to the ls1021a.dtsi this platform DT files
are based on.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "clock-latency" property is part of the deprecated opp-v1 binding
and is redundant if the opp-v2 table has equal or larger values in any
"clock-latency-ns". The OPP tables have values of 150000, so it can be
removed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The "fsl,mma7455l" compatible string is not documented anywhere.
MMA7455L is the exact same device as the MMA7455, with the exception that
it is lead-free. Use the documented compatible string.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per imx-iim.yaml, the compatible string should only contain a single
entry.
Change it accordingly to fix the following dt-schema warnings:
efuse@83f98000: compatible: ['fsl,imx51-iim', 'fsl,imx27-iim', 'syscon'] is too long
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
According to mtd-physmap.yaml, 'nor' is not a valid node name.
Change it to 'flash' to fix the following dt-schema warning:
nor@0,0: $nodename:0: 'nor@0,0' does not match '^(flash|.*sram|nand)(@.*)?$'
Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
