Starting from 105ff5339f ("mm/memfd: add MFD_NOEXEC_SEAL and
MFD_EXEC") and until 1717449b44 ("memfd: drop warning for missing
exec-related flags"), the kernel would print a warning if neither
MFD_NOEXEC_SEAL nor MFD_EXEC is set in memfd_create().
If libbpf runs on on a kernel between these two commits (eg. on an
improperly backported system), it'll trigger this warning.
To avoid this warning (and also be more secure), explicitly set
MFD_NOEXEC_SEAL. But since libbpf can be run on potentially very old
kernels, leave a fallback for kernels without MFD_NOEXEC_SEAL support.
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/6e62c2421ad7eb1da49cbf16da95aaaa7f94d394.1735594195.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The new_fd and add_fd functions correspond to the original new and
add_file functions, but accept an FD instead of a file name. This
gives API consumers the option of using anonymous files/memfds to
avoid writing ELFs to disk.
This new API will be useful for performing linking as part of
bpftrace's JIT compilation.
The add_buf function is a convenience wrapper that does the work of
creating a memfd for the caller.
Signed-off-by: Alastair Robertson <ajor@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241211164030.573042-3-ajor@meta.com
Move the filename arguments and file-descriptor handling from
init_output_elf() and linker_load_obj_file() and instead handle them
at the top-level in bpf_linker__new() and bpf_linker__add_file().
This will allow the inner functions to be shared with a new,
non-filename-based, API in the next commit.
Signed-off-by: Alastair Robertson <ajor@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241211164030.573042-2-ajor@meta.com
Since the linked fixes: commit, specifying a CPU on hybrid platforms
results in an error because Perf tries to open an extended type event
on "any" CPU which isn't valid. Extended type events can only be opened
on CPUs that match the type.
Before (working):
$ perf record --cpu 1 -- true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 2.385 MB perf.data (7 samples) ]
After (not working):
$ perf record -C 1 -- true
WARNING: A requested CPU in '1' is not supported by PMU 'cpu_atom' (CPUs 16-27) for event 'cycles:P'
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (cpu_atom/cycles:P/).
/bin/dmesg | grep -i perf may provide additional information.
(Ignore the warning message, that's expected and not particularly
relevant to this issue).
This is because perf_cpu_map__intersect() of the user specified CPU (1)
and one of the PMU's CPUs (16-27) correctly results in an empty (NULL)
CPU map. However for the purposes of opening an event, libperf converts
empty CPU maps into an any CPU (-1) which the kernel rejects.
Fix it by deleting evsels with empty CPU maps in the specific case where
user requested CPU maps are evaluated.
Fixes: 251aa04024 ("perf parse-events: Wildcard most "numeric" events")
Reviewed-by: Ian Rogers <irogers@google.com>
Tested-by: Thomas Falcon <thomas.falcon@intel.com>
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20241114160450.295844-2-james.clark@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Libelf functions do not set errno on failure. Instead, it relies on its
internal _elf_errno value, that can be retrieved via elf_errno (or the
corresponding message via elf_errmsg()). From "man libelf":
If a libelf function encounters an error it will set an internal
error code that can be retrieved with elf_errno. Each thread
maintains its own separate error code. The meaning of each error
code can be determined with elf_errmsg, which returns a string
describing the error.
As a consequence, libbpf should not return -errno when a function from
libelf fails, because an empty value will not be interpreted as an error
and won't prevent the program to stop. This is visible in
bpf_linker__add_file(), for example, where we call a succession of
functions that rely on libelf:
err = err ?: linker_load_obj_file(linker, filename, opts, &obj);
err = err ?: linker_append_sec_data(linker, &obj);
err = err ?: linker_append_elf_syms(linker, &obj);
err = err ?: linker_append_elf_relos(linker, &obj);
err = err ?: linker_append_btf(linker, &obj);
err = err ?: linker_append_btf_ext(linker, &obj);
If the object file that we try to process is not, in fact, a correct
object file, linker_load_obj_file() may fail with errno not being set,
and return 0. In this case we attempt to run linker_append_elf_sysms()
and may segfault.
This can happen (and was discovered) with bpftool:
$ bpftool gen object output.o sample_ret0.bpf.c
libbpf: failed to get ELF header for sample_ret0.bpf.c: invalid `Elf' handle
zsh: segmentation fault (core dumped) bpftool gen object output.o sample_ret0.bpf.c
Fix the issue by returning a non-null error code (-EINVAL) when libelf
functions fail.
Fixes: faf6ed321c ("libbpf: Add BPF static linker APIs")
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241205135942.65262-1-qmo@kernel.org
When running `bpftool` on a kernel module installed in `/lib/modules...`,
this error is encountered if the user does not specify `--base-btf` to
point to a valid base BTF (e.g. usually in `/sys/kernel/btf/vmlinux`).
However, looking at the debug output to determine the cause of the error
simply says `Invalid BTF string section`, which does not point to the
actual source of the error. This just improves that debug message to tell
users what happened.
Signed-off-by: Ben Olson <matthew.olson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/Z0YqzQ5lNz7obQG7@bolson-desk
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
USDT ELF note optionally can record an offset of .stapsdt.base, which is
used to make adjustments to USDT target attach address. Currently,
libbpf will do this address adjustment unconditionally if it finds
.stapsdt.base ELF section in target binary. But there is a corner case
where .stapsdt.base ELF section is present, but specific USDT note
doesn't reference it. In such case, libbpf will basically just add base
address and end up with absolutely incorrect USDT target address.
This adjustment has to be done only if both .stapsdt.sema section is
present and USDT note is recording a reference to it.
Fixes: 74cc6311ce ("libbpf: Add USDT notes parsing and resolution logic")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20241121224558.796110-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull perf tools updates from Namhyung Kim:
"perf record:
- Enable leader sampling for inherited task events. It was supported
only for system-wide events but the kernel started to support such
a setup since v6.12.
This is to reduce the number of PMU interrupts. The samples of the
leader event will contain counts of other events and no samples
will be generated for the other member events.
$ perf record -e '{cycles,instructions}:S' ${MYPROG}
perf report:
- Fix --branch-history option to display more branch-related
information like prediction, abort and cycles which is available
on Intel machines.
$ perf record -bg -- perf test -w brstack
$ perf report --branch-history
...
#
# Overhead Source:Line Symbol Shared Object Predicted Abort Cycles IPC [IPC Coverage]
# ........ ........................ .............. .................... ......... ..... ...... ....................
#
8.17% copy_page_64.S:19 [k] copy_page [kernel.kallsyms] 50.0% 0 5 - -
|
---xas_load xarray.h:171
|
|--5.68%--xas_load xarray.c:245 (cycles:1)
| xas_load xarray.c:242
| xas_load xarray.h:1260 (cycles:1)
| xas_descend xarray.c:146
| xas_load xarray.c:244 (cycles:2)
| xas_load xarray.c:245
| xas_descend xarray.c:218 (cycles:10)
...
perf stat:
- Add HWMON PMU support.
The HWMON provides various system information like CPU/GPU
temperature, fan speed and so on. Expose them as PMU events so that
users can see the values using perf stat commands.
$ perf stat -e temp_cpu,fan1 true
Performance counter stats for 'true':
60.00 'C temp_cpu
0 rpm fan1
0.000745382 seconds time elapsed
0.000883000 seconds user
0.000000000 seconds sys
- Display metric threshold in JSON output.
Some metrics define thresholds to classify value ranges. It used to
be in a different color but it won't work for JSON.
Add "metric-threshold" field to the JSON that can be one of "good",
"less good", "nearly bad" and "bad".
# perf stat -a -M TopdownL1 -j true
{"counter-value" : "18693525.000000", "unit" : "", "event" : "TOPDOWN.SLOTS", "event-runtime" : 5552708, "pcnt-running" : 100.00, "metric-value" : "43.226002", "metric-unit" : "% tma_backend_bound", "metric-threshold" : "bad"}
{"metric-value" : "29.212267", "metric-unit" : "% tma_frontend_bound", "metric-threshold" : "bad"}
{"metric-value" : "7.138972", "metric-unit" : "% tma_bad_speculation", "metric-threshold" : "good"}
{"metric-value" : "20.422759", "metric-unit" : "% tma_retiring", "metric-threshold" : "good"}
{"counter-value" : "3817732.000000", "unit" : "", "event" : "topdown-retiring", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "5472824.000000", "unit" : "", "event" : "topdown-fe-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "7984780.000000", "unit" : "", "event" : "topdown-be-bound", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
{"counter-value" : "1418181.000000", "unit" : "", "event" : "topdown-bad-spec", "event-runtime" : 5552708, "pcnt-running" : 100.00, }
...
perf sched:
- Add -P/--pre-migrations option for 'timehist' sub-command to track
time a task waited on a run-queue before migrating to a different
CPU.
$ perf sched timehist -P
time cpu task name wait time sch delay run time pre-mig time
[tid/pid] (msec) (msec) (msec) (msec)
--------------- ------ ------------------------------ --------- --------- --------- ---------
585940.535527 [0000] perf[584885] 0.000 0.000 0.000 0.000
585940.535535 [0000] migration/0[20] 0.000 0.002 0.008 0.000
585940.535559 [0001] perf[584885] 0.000 0.000 0.000 0.000
585940.535563 [0001] migration/1[25] 0.000 0.001 0.004 0.000
585940.535678 [0002] perf[584885] 0.000 0.000 0.000 0.000
585940.535686 [0002] migration/2[31] 0.000 0.002 0.008 0.000
585940.535905 [0001] <idle> 0.000 0.000 0.342 0.000
585940.535938 [0003] perf[584885] 0.000 0.000 0.000 0.000
585940.537048 [0001] sleep[584886] 0.000 0.019 1.142 0.001
585940.537749 [0002] <idle> 0.000 0.000 2.062 0.000
...
Build:
- Make libunwind opt-in (LIBUNWIND=1) rather than opt-out.
The perf tools are generally built with libelf and libdw which has
unwinder functionality. The libunwind support predates it and no
need to have duplicate unwinders by default.
- Rename NO_DWARF=1 build option to NO_LIBDW=1 in order to clarify
it's using libdw for handling DWARF information.
Internals:
- Do not set exclude_guest bit in the perf_event_attr by default.
This was causing a trouble in AMD IBS PMU as it doesn't support the
bit. The bit will be set when it's needed later by the fallback
logic. Also update the missing feature detection logic to make sure
not clear supported bits unnecessarily.
- Run perf test in parallel by default and mark flaky tests
"exclusive" to run them serially at the end. Some test numbers are
changed but the test can complete in less than half the time.
JSON vendor events:
- Add AMD Zen 5 events and metrics.
- Add i.MX91 and i.MX95 DDR metrics
- Fix HiSilicon HIP08 Topdown metric name.
- Support compat events on PowerPC"
* tag 'perf-tools-for-v6.13-2024-11-24' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (232 commits)
perf tests: Fix hwmon parsing with PMU name test
perf hwmon_pmu: Ensure hwmon key union is zeroed before use
perf tests hwmon_pmu: Remove double evlist__delete()
perf/test: fix perf ftrace test on s390
perf bpf-filter: Return -ENOMEM directly when pfi allocation fails
perf test: Correct hwmon test PMU detection
perf: Remove unused del_perf_probe_events()
perf pmu: Move pmu_metrics_table__find and remove ARM override
perf jevents: Add map_for_cpu()
perf header: Pass a perf_cpu rather than a PMU to get_cpuid_str
perf header: Avoid transitive PMU includes
perf arm64 header: Use cpu argument in get_cpuid
perf header: Refactor get_cpuid to take a CPU for ARM
perf header: Move is_cpu_online to numa bench
perf jevents: fix breakage when do perf stat on system metric
perf test: Add missing __exit calls in tool/hwmon tests
perf tests: Make leader sampling test work without branch event
perf util: Remove kernel version deadcode
perf test shell trace_exit_race: Use --no-comm to avoid cases where COMM isn't resolved
perf test shell trace_exit_race: Show what went wrong in verbose mode
...
Pull non-MM updates from Andrew Morton:
- The series "resource: A couple of cleanups" from Andy Shevchenko
performs some cleanups in the resource management code
- The series "Improve the copy of task comm" from Yafang Shao addresses
possible race-induced overflows in the management of
task_struct.comm[]
- The series "Remove unnecessary header includes from
{tools/}lib/list_sort.c" from Kuan-Wei Chiu adds some cleanups and a
small fix to the list_sort library code and to its selftest
- The series "Enhance min heap API with non-inline functions and
optimizations" also from Kuan-Wei Chiu optimizes and cleans up the
min_heap library code
- The series "nilfs2: Finish folio conversion" from Ryusuke Konishi
finishes off nilfs2's folioification
- The series "add detect count for hung tasks" from Lance Yang adds
more userspace visibility into the hung-task detector's activity
- Apart from that, singelton patches in many places - please see the
individual changelogs for details
* tag 'mm-nonmm-stable-2024-11-24-02-05' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (71 commits)
gdb: lx-symbols: do not error out on monolithic build
kernel/reboot: replace sprintf() with sysfs_emit()
lib: util_macros_kunit: add kunit test for util_macros.h
util_macros.h: fix/rework find_closest() macros
Improve consistency of '#error' directive messages
ocfs2: fix uninitialized value in ocfs2_file_read_iter()
hung_task: add docs for hung_task_detect_count
hung_task: add detect count for hung tasks
dma-buf: use atomic64_inc_return() in dma_buf_getfile()
fs/proc/kcore.c: fix coccinelle reported ERROR instances
resource: avoid unnecessary resource tree walking in __region_intersects()
ocfs2: remove unused errmsg function and table
ocfs2: cluster: fix a typo
lib/scatterlist: use sg_phys() helper
checkpatch: always parse orig_commit in fixes tag
nilfs2: convert metadata aops from writepage to writepages
nilfs2: convert nilfs_recovery_copy_block() to take a folio
nilfs2: convert nilfs_page_count_clean_buffers() to take a folio
nilfs2: remove nilfs_writepage
nilfs2: convert checkpoint file to be folio-based
...
Pull bpf updates from Alexei Starovoitov:
- Add BPF uprobe session support (Jiri Olsa)
- Optimize uprobe performance (Andrii Nakryiko)
- Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman)
- Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao)
- Prevent tailcall infinite loop caused by freplace (Leon Hwang)
- Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi)
- Introduce uptr support in the task local storage map (Martin KaFai
Lau)
- Stringify errno log messages in libbpf (Mykyta Yatsenko)
- Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim)
- Support BPF objects of either endianness in libbpf (Tony Ambardar)
- Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai)
- Introduce private stack for eligible BPF programs (Yonghong Song)
- Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee)
- Migrate test_sock to selftests/bpf test_progs (Jordan Rife)
* tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits)
libbpf: Change hash_combine parameters from long to unsigned long
selftests/bpf: Fix build error with llvm 19
libbpf: Fix memory leak in bpf_program__attach_uprobe_multi
bpf: use common instruction history across all states
bpf: Add necessary migrate_disable to range_tree.
bpf: Do not alloc arena on unsupported arches
selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar
selftests/bpf: Add a test for arena range tree algorithm
bpf: Introduce range_tree data structure and use it in bpf arena
samples/bpf: Remove unused variable in xdp2skb_meta_kern.c
samples/bpf: Remove unused variables in tc_l2_redirect_kern.c
bpftool: Cast variable `var` to long long
bpf, x86: Propagate tailcall info only for subprogs
bpf: Add kernel symbol for struct_ops trampoline
bpf: Use function pointers count as struct_ops links count
bpf: Remove unused member rcu from bpf_struct_ops_map
selftests/bpf: Add struct_ops prog private stack tests
bpf: Support private stack for struct_ops progs
selftests/bpf: Add tracing prog private stack tests
bpf, x86: Support private stack in jit
...
Cross-merge bpf fixes after downstream PR.
In particular to bring the fix in
commit aa30eb3260 ("bpf: Force checkpoint when jmp history is too long").
The follow up verifier work depends on it.
And the fix in
commit 6801cf7890 ("selftests/bpf: Use -4095 as the bad address for bits iterator").
It's fixing instability of BPF CI on s390 arch.
No conflicts.
Adjacent changes in:
Auto-merging arch/Kconfig
Auto-merging kernel/bpf/helpers.c
Auto-merging kernel/bpf/memalloc.c
Auto-merging kernel/bpf/verifier.c
Auto-merging mm/slab_common.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Adding support to attach program in uprobe session mode
with bpf_program__attach_uprobe_multi function.
Adding session bool to bpf_uprobe_multi_opts struct that allows
to load and attach the bpf program via uprobe session.
the attachment to create uprobe multi session.
Also adding new program loader section that allows:
SEC("uprobe.session/bpf_fentry_test*")
and loads/attaches uprobe program as uprobe session.
Adding sleepable hook (uprobe.session.s) as well.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-6-jolsa@kernel.org
Adding support to attach BPF program for entry and return probe
of the same function. This is common use case which at the moment
requires to create two uprobe multi links.
Adding new BPF_TRACE_UPROBE_SESSION attach type that instructs
kernel to attach single link program to both entry and exit probe.
It's possible to control execution of the BPF program on return
probe simply by returning zero or non zero from the entry BPF
program execution to execute or not the BPF program on return
probe respectively.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241108134544.480660-4-jolsa@kernel.org
The sampling handler, provided by the user alongside a void* context,
was invoked with an internal structure instead of the user context.
Correct the invocation of the sampling handler to pass the user context
pointer instead.
Note that the approach taken is similar to that in events.c, and will
reduce the chances of this mistake happening if additional sampling
callbacks are added.
Fixes: 47c4b0de08 ("tools/lib/thermal: Add a thermal library")
Signed-off-by: Emil Dahl Juhl <emdj@bang-olufsen.dk>
Link: https://lore.kernel.org/r/20241015171826.170154-1-emdj@bang-olufsen.dk
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
The thermal netlink has been extended with more commands which require
an encoding with more information. The generic encoding function puts
the thermal zone id with the command name. It is the unique
parameters.
The next changes will provide more parameters to the command. Set the
scene for those new parameters by making the encoding function more
generic.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20241022155147.463475-4-daniel.lezcano@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since BPF skeleton inception libbpf has been doing mmap()'ing of global
data ARRAY maps in bpf_object__load_skeleton() API, which is used by
code generated .skel.h files (i.e., by BPF skeletons only).
This is wrong because if BPF object is loaded through generic
bpf_object__load() API, global data maps won't be re-mmap()'ed after
load step, and memory pointers returned from bpf_map__initial_value()
would be wrong and won't reflect the actual memory shared between BPF
program and user space.
bpf_map__initial_value() return result is rarely used after load, so
this went unnoticed for a really long time, until bpftrace project
attempted to load BPF object through generic bpf_object__load() API and
then used BPF subskeleton instantiated from such bpf_object. It turned
out that .data/.rodata/.bss data updates through such subskeleton was
"blackholed", all because libbpf wouldn't re-mmap() those maps during
bpf_object__load() phase.
Long story short, this step should be done by libbpf regardless of BPF
skeleton usage, right after BPF map is created in the kernel. This patch
moves this functionality into bpf_object__populate_internal_map() to
achieve this. And bpf_object__load_skeleton() is now simple and almost
trivial, only propagating these mmap()'ed pointers into user-supplied
skeleton structs.
We also do trivial adjustments to error reporting inside
bpf_object__populate_internal_map() for consistency with the rest of
libbpf's map-handling code.
Reported-by: Alastair Robertson <ajor@meta.com>
Reported-by: Jonathan Wiepert <jwiepert@meta.com>
Fixes: d66562fba1 ("libbpf: Add BPF object skeleton support")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241023043908.3834423-3-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Initialize the pointer 'o' in options__order to NULL to prevent a
compiler warning/error which is observed when compiling with the '-Og'
option, but is not emitted by the compiler with the current default
compilation options.
For example, when compiling libsubcmd with
$ make "EXTRA_CFLAGS=-Og" -C tools/lib/subcmd/ clean all
Clang version 17.0.6 and GCC 13.3.1 fail to compile parse-options.c due
to following error:
parse-options.c: In function ‘options__order’:
parse-options.c:832:9: error: ‘o’ may be used uninitialized [-Werror=maybe-uninitialized]
832 | memcpy(&ordered[nr_opts], o, sizeof(*o));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
parse-options.c:810:30: note: ‘o’ was declared here
810 | const struct option *o, *p = opts;
| ^
cc1: all warnings being treated as errors
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241022172329.3871958-4-ezulian@redhat.com
Initialize 'new_off' and 'pad_bits' to 0 and 'pad_type' to NULL in
btf_dump_emit_bit_padding to prevent compiler warnings/errors which are
observed when compiling with 'EXTRA_CFLAGS=-g -Og' options, but do not
happen when compiling with current default options.
For example, when compiling libbpf with
$ make "EXTRA_CFLAGS=-g -Og" -C tools/lib/bpf/ clean all
Clang version 17.0.6 and GCC 13.3.1 fail to compile btf_dump.c due to
following errors:
btf_dump.c: In function ‘btf_dump_emit_bit_padding’:
btf_dump.c:903:42: error: ‘new_off’ may be used uninitialized [-Werror=maybe-uninitialized]
903 | if (new_off > cur_off && new_off <= next_off) {
| ~~~~~~~~^~~~~~~~~~~
btf_dump.c:870:13: note: ‘new_off’ was declared here
870 | int new_off, pad_bits, bits, i;
| ^~~~~~~
btf_dump.c:917:25: error: ‘pad_type’ may be used uninitialized [-Werror=maybe-uninitialized]
917 | btf_dump_printf(d, "\n%s%s: %d;", pfx(lvl), pad_type,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
918 | in_bitfield ? new_off - cur_off : 0);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
btf_dump.c:871:21: note: ‘pad_type’ was declared here
871 | const char *pad_type;
| ^~~~~~~~
btf_dump.c:930:20: error: ‘pad_bits’ may be used uninitialized [-Werror=maybe-uninitialized]
930 | if (bits == pad_bits) {
| ^
btf_dump.c:870:22: note: ‘pad_bits’ was declared here
870 | int new_off, pad_bits, bits, i;
| ^~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20241022172329.3871958-3-ezulian@redhat.com
The hashmap__for_each_entry[_safe] is accessing 'map' as a pointer.
But it does without parentheses so passing a static hash map with an
ampersand (like '&slab_hash') will cause compiler warnings due
to unmatched types as '->' operator has a higher precedence.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241011170021.1490836-1-namhyung@kernel.org
Libbpf pre-1.0 had a legacy logic of allowing singular non-annotated
(i.e., not having explicit SEC() annotation) function to be treated as
sole entry BPF program (unless there were other explicit entry
programs).
This behavior was dropped during libbpf 1.0 transition period (unless
LIBBPF_STRICT_SEC_NAME flag was unset in libbpf_mode). When 1.0 was
released and all the legacy behavior was removed, the bug slipped
through leaving this legacy behavior around.
Fix this for good, as it actually causes very confusing behavior if BPF
object file only has subprograms, but no entry programs.
Fixes: bd054102a8 ("libbpf: enforce strict libbpf 1.0 behaviors")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241010211731.4121837-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
sym_is_subprog() is incorrectly rejecting relocations against *weak*
global subprogs. Fix that by realizing that STB_WEAK is also a global
function.
While it seems like verifier doesn't support taking an address of
non-static subprog right now, it's still best to fix support for it on
libbpf side, otherwise users will get a very confusing error during BPF
skeleton generation or static linking due to misinterpreted relocation:
libbpf: prog 'handle_tp': bad map relo against 'foo' in section '.text'
Error: failed to open BPF object file: Relocation failed
It's clearly not a map relocation, but is treated and reported as such
without this fix.
Fixes: 53eddb5e04 ("libbpf: Support subprog address relocation")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20241009011554.880168-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Track target endianness in 'struct bpf_gen' and process in-memory data in
native byte-order, but on finalization convert the embedded loader BPF
insns to target endianness.
The light skeleton also includes a target-accessed data blob which is
heterogeneous and thus difficult to convert to target byte-order on
finalization. Add support functions to convert data to target endianness
as it is added to the blob.
Also add additional debug logging for data blob structure details and
skeleton loading.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/569562e1d5bf1cce80a1f1a3882461ee2da1ffd5.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Allow static linking object files of either endianness, checking that input
files have consistent byte-order, and setting output endianness from input.
Linking requires in-memory processing of programs, relocations, sections,
etc. in native endianness, and output conversion to target byte-order. This
is enabled by built-in ELF translation and recent BTF/BTF.ext endianness
functions. Further add local functions for swapping byte-order of sections
containing BPF insns.
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/b47ca686d02664843fc99b96262fe3259650bc43.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Support for handling BTF data of either endianness was added in [1], but
did not include BTF.ext data for lack of use cases. Later, support for
static linking [2] provided a use case, but this feature and later ones
were restricted to native-endian usage.
Add support for BTF.ext handling in either endianness. Convert BTF.ext data
to native endianness when read into memory for further processing, and
support raw data access that restores the original byte-order for output.
Add internal header functions for byte-swapping func, line, and core info
records.
Add new API functions btf_ext__endianness() and btf_ext__set_endianness()
for query and setting byte-order, as already exist for BTF data.
[1] 3289959b97 ("libbpf: Support BTF loading and raw data output in both endianness")
[2] 8fd27bf69b ("libbpf: Add BPF static linker BTF and BTF.ext support")
Signed-off-by: Tony Ambardar <tony.ambardar@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/133407ab20e0dd5c07cab2a6fa7879dee1ffa4bc.1726475448.git.tony.ambardar@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
