Pull SCSI updates from James Bottomley:
"Usual driver updates (qla2xxx, mpi3mr, mpt3sas, ufs) plus assorted
cleanups and fixes.
The biggest core change is the massive code motion in the sd driver to
remove forward declarations and the most significant change is to
enumify the queuecommand return"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (78 commits)
scsi: csiostor: Fix dereference of null pointer rn
scsi: buslogic: Reduce stack usage
scsi: ufs: host: mediatek: Require CONFIG_PM
scsi: ufs: mediatek: Fix page faults in ufs_mtk_clk_scale() trace event
scsi: smartpqi: Fix memory leak in pqi_report_phys_luns()
scsi: mpi3mr: Make driver probing asynchronous
scsi: ufs: core: Flush exception handling work when RPM level is zero
scsi: efct: Use IRQF_ONESHOT and default primary handler
scsi: ufs: core: Use a host-wide tagset in SDB mode
scsi: qla2xxx: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla2xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: qla4xxx: Add WQ_PERCPU to alloc_workqueue() users
scsi: mpi3mr: Driver version update to 8.17.0.3.50
scsi: mpi3mr: Fixed the W=1 compilation warning
scsi: mpi3mr: Record and report controller firmware faults
scsi: mpi3mr: Update MPI Headers to revision 39
scsi: mpi3mr: Use negotiated link rate from DevicePage0
scsi: mpi3mr: Avoid redundant diag-fault resets
scsi: mpi3mr: Rename log data save helper to reflect threaded/BH context
scsi: mpi3mr: Add module parameter to control threaded IRQ polling
...
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Don't try to enable Extended Tags on VFs since that bit is Reserved
and causes misleading log messages (Håkon Bugge)
- Initialize Endpoint Read Completion Boundary to match Root Port,
regardless of ACPI _HPX (Håkon Bugge)
- Apply _HPX PCIe Setting Record only to AER configuration, and only
when OS owns PCIe hotplug but not AER, to avoid clobbering Extended
Tag and Relaxed Ordering settings (Håkon Bugge)
Resource management:
- Move CardBus code to setup-cardbus.c and only build it when
CONFIG_CARDBUS is set (Ilpo Järvinen)
- Fix bridge window alignment with optional resources, where
additional alignment requirement was previously lost (Ilpo
Järvinen)
- Stop over-estimating bridge window size since they are now assigned
without any gaps between them (Ilpo Järvinen)
- Increase resource MAX_IORES_LEVEL to avoid /proc/iomem flattening
for nested bridges and endpoints (Ilpo Järvinen)
- Add pbus_mem_size_optional() to handle sizes of optional resources
(SR-IOV VF BARs, expansion ROMs, bridge windows) (Ilpo Järvinen)
- Don't claim disabled bridge windows to avoid spurious claim
failures (Ilpo Järvinen)
Driver binding:
- Fix device reference leak in pcie_port_remove_service() (Uwe
Kleine-König)
- Move pcie_port_bus_match() and pcie_port_bus_type to PCIe-specific
portdrv.c (Uwe Kleine-König)
- Convert portdrv to use pcie_port_bus_type.probe() and .remove()
callbacks so .probe() and .remove() can eventually be removed from
struct device_driver (Uwe Kleine-König)
Error handling:
- Clear stale errors on reporting agents upon probe so they don't
look like recent errors (Lukas Wunner)
- Add generic RAS tracepoint for hotplug events (Shuai Xue)
- Add RAS tracepoint for link speed changes (Shuai Xue)
Power management:
- Avoid redundant delay on transition from D3hot to D3cold if the
device was already in D3hot (Brian Norris)
- Prevent runtime suspend until devices are fully initialized to
avoid saving incompletely configured device state (Brian Norris)
Power control:
- Add power_on/off callbacks with generic signature to pwrseq,
tc9563, and slot drivers so they can be used by pwrctrl core
(Manivannan Sadhasivam)
- Add PCIe M.2 connector support to the slot pwrctrl driver
(Manivannan Sadhasivam)
- Switch to pwrctrl interfaces to create, destroy, and power on/off
devices, calling them from host controller drivers instead of the
PCI core (Manivannan Sadhasivam)
- Drop qcom .assert_perst() callbacks since this is now done by the
controller driver instead of the pwrctrl driver (Manivannan
Sadhasivam)
Virtualization:
- Remove an incorrect unlock in pci_slot_trylock() error handling
(Jinhui Guo)
- Lock the bridge device for slot reset (Keith Busch)
- Enable ACS after IOMMU configuration on OF platforms so ACS is
enabled an all devices; previously the first device enumerated
(typically a Root Port) didn't have ACS enabled (Manivannan
Sadhasivam)
- Disable ACS Source Validation for IDT 0x80b5 and 0x8090 switches to
work around hardware erratum; previously ACS SV was only
temporarily disabled, which worked for enumeration but not after
reset (Manivannan Sadhasivam)
Peer-to-peer DMA:
- Release per-CPU pgmap ref when vm_insert_page() fails to avoid hang
when removing the PCI device (Hou Tao)
- Remove incorrect p2pmem_alloc_mmap() warning about page refcount
(Hou Tao)
Endpoint framework:
- Add configfs sub-groups synchronously to avoid NULL pointer
dereference when racing with removal (Liu Song)
- Fix swapped parameters in pci_{primary/secondary}_epc_epf_unlink()
functions (Manikanta Maddireddy)
ASPEED PCIe controller driver:
- Add ASPEED Root Complex DT binding and driver (Jacky Chou)
Freescale i.MX6 PCIe controller driver:
- Add DT binding and driver support for an optional external refclock
in addition to the refclock from the internal PLL (Richard Zhu)
- Fix CLKREQ# control so host asserts it during enumeration and
Endpoints can use it afterwards to exit the L1.2 link state
(Richard Zhu)
NVIDIA Tegra PCIe controller driver:
- Export irq_domain_free_irqs() to allow PCI/MSI drivers that tear
down MSI domains to be built as modules (Aaron Kling)
- Allow pci-tegra to be built as a module (Aaron Kling)
NVIDIA Tegra194 PCIe controller driver:
- Relax Kconfig so tegra194 can be built for platforms beyond
Tegra194 (Vidya Sagar)
Qualcomm PCIe controller driver:
- Merge SC8180x DT binding into SM8150 (Krzysztof Kozlowski)
- Move SDX55, SDM845, QCS404, IPQ5018, IPQ6018, IPQ8074 Gen3,
IPQ8074, IPQ4019, IPQ9574, APQ8064, MSM8996, APQ8084 to dedicated
schema (Krzysztof Kozlowski)
- Add DT binding and driver support for SA8255p Endpoint being
configured by firmware (Mrinmay Sarkar)
- Parse PERST# from all PCIe bridge nodes for future platforms that
will have PERST# in Switch Downstream Ports as well as in Root
Ports (Manivannan Sadhasivam)
Renesas RZ/G3S PCIe controller driver:
- Use pci_generic_config_write() since the writability provided by
the custom wrapper is unnecessary (Claudiu Beznea)
SOPHGO PCIe controller driver:
- Disable ASPM L0s and L1 on Sophgo 2044 PCIe Root Ports (Inochi
Amaoto)
Synopsys DesignWare PCIe controller driver:
- Extend PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() to return a
pointer to the preceding Capability, to allow removal of
Capabilities that are advertised but not fully implemented (Qiang
Yu)
- Remove MSI and MSI-X Capabilities in platforms that can't support
them, so the PCI core automatically falls back to INTx (Qiang Yu)
- Add ASPM L1.1 and L1.2 Substates context to debugfs ltssm_status
for drivers that support this (Shawn Lin)
- Skip PME_Turn_Off broadcast and L2/L3 transition during suspend if
link is not up to avoid an unnecessary timeout (Manivannan
Sadhasivam)
- Revert dw-rockchip, qcom, and DWC core changes that used link-up
IRQs to trigger enumeration instead of waiting for link to be up
because the PCI core doesn't allocate bus number space for
hierarchies that might be attached (Niklas Cassel)
- Make endpoint iATU entry for MSI permanent instead of programming
it dynamically, which is slow and racy with respect to other
concurrent traffic, e.g., eDMA (Koichiro Den)
- Use iMSI-RX MSI target address when possible to fix endpoints using
32-bit MSI (Shawn Lin)
- Allow DWC host controller driver probe to continue if device is not
found or found but inactive; only fail when there's an error with
the link (Manivannan Sadhasivam)
- For controllers like NXP i.MX6QP and i.MX7D, where LTSSM registers
are not accessible after PME_Turn_Off, simply wait 10ms instead of
polling for L2/L3 Ready (Richard Zhu)
- Use multiple iATU entries to map large bridge windows and DMA
ranges when necessary instead of failing (Samuel Holland)
- Add EPC dynamic_inbound_mapping feature bit for Endpoint
Controllers that can update BAR inbound address translation without
requiring EPF driver to clear/reset the BAR first, and advertise it
for DWC-based Endpoints (Koichiro Den)
- Add EPC subrange_mapping feature bit for Endpoint Controllers that
can map multiple independent inbound regions in a single BAR,
implement subrange mapping, advertise it for DWC-based Endpoints,
and add Endpoint selftests for it (Koichiro Den)
- Make resizable BARs work for Endpoint multi-PF configurations;
previously it only worked for PF 0 (Aksh Garg)
- Fix Endpoint non-PF 0 support for BAR configuration, ATU mappings,
and Address Match Mode (Aksh Garg)
- Set up iATU when ECAM is enabled; previously IO and MEM outbound
windows weren't programmed, and ECAM-related iATU entries weren't
restored after suspend/resume, so config accesses failed (Krishna
Chaitanya Chundru)
Miscellaneous:
- Use system_percpu_wq and WQ_PERCPU to explicitly request per-CPU
work so WQ_UNBOUND can eventually be removed (Marco Crivellari)"
* tag 'pci-v7.0-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (176 commits)
PCI/bwctrl: Disable BW controller on Intel P45 using a quirk
PCI: Disable ACS SV for IDT 0x8090 switch
PCI: Disable ACS SV for IDT 0x80b5 switch
PCI: Cache ACS Capabilities register
PCI: Enable ACS after configuring IOMMU for OF platforms
PCI: Add ACS quirk for Pericom PI7C9X2G404 switches [12d8:b404]
PCI: Add ACS quirk for Qualcomm Hamoa & Glymur
PCI: Use device_lock_assert() to verify device lock is held
PCI: Use lockdep_assert_held(pci_bus_sem) to verify lock is held
PCI: Fix pci_slot_lock () device locking
PCI: Fix pci_slot_trylock() error handling
PCI: Mark Nvidia GB10 to avoid bus reset
PCI: Mark ASM1164 SATA controller to avoid bus reset
PCI: host-generic: Avoid reporting incorrect 'missing reg property' error
PCI/PME: Replace RMW of Root Status register with direct write
PCI/AER: Clear stale errors on reporting agents upon probe
PCI: Don't claim disabled bridge windows
PCI: rzg3s-host: Fix device node reference leak in rzg3s_pcie_host_parse_port()
PCI: dwc: Fix missing iATU setup when ECAM is enabled
PCI: dwc: Clean up iATU index usage in dw_pcie_iatu_setup()
...
Pull irq cleanups from Thomas Gleixner:
"A series of treewide cleanups to ensure interrupt request consistency.
- Add the missing IRQF_COND_ONESHOT flag to devm_request_irq()
This is inconsistent vs request_irq() and causes the same issues
which where addressed with the introduction of this flag
- Cleanup IRQF_ONESHOT and IRQF_NO_THREAD usage
Quite some drivers have inconsistent interrupt request flags
related to interrupt threading namely IRQF_ONESHOT and
IRQF_NO_THREAD. This leads to warnings and/or malfunction when
forced interrupt threading is enabled.
- Remove stub primary (hard interrupt) handlers
A bunch of drivers implement a stub primary (hard interrupt)
handler which just returns IRQ_WAKE_THREAD. The same functionality
is provided by the core code when the primary handler argument of
request_thread_irq() is set to NULL"
* tag 'irq-cleanups-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
media: pci: mg4b: Use IRQF_NO_THREAD
mfd: wm8350-core: Use IRQF_ONESHOT
thermal/qcom/lmh: Replace IRQF_ONESHOT with IRQF_NO_THREAD
rtc: amlogic-a4: Remove IRQF_ONESHOT
usb: typec: fusb302: Remove IRQF_ONESHOT
EDAC/altera: Remove IRQF_ONESHOT
char: tpm: cr50: Remove IRQF_ONESHOT
ARM: versatile: Remove IRQF_ONESHOT
scsi: efct: Use IRQF_ONESHOT and default primary handler
Bluetooth: btintel_pcie: Use IRQF_ONESHOT and default primary handler
bus: fsl-mc: Use default primary handler
mailbox: bcm-ferxrm-mailbox: Use default primary handler
iommu/amd: Use core's primary handler and set IRQF_ONESHOT
platform/x86: int0002: Remove IRQF_ONESHOT from request_irq()
genirq: Set IRQF_COND_ONESHOT in devm_request_irq().
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
When all files are closed, functionfs needs ffs_data_reset() to be
done before any further opens are allowed.
During that time we have ffs->state set to FFS_CLOSING; that makes
->open() fail with -EBUSY. Once ffs_data_reset() is done, it
switches state (to FFS_READ_DESCRIPTORS) indicating that opening
that thing is allowed again. There's a couple of additional twists:
* mounting with -o no_disconnect delays ffs_data_reset()
from doing that at the final ->release() to the first subsequent
open(). That's indicated by ffs->state set to FFS_DEACTIVATED;
if open() sees that, it immediately switches to FFS_CLOSING and
proceeds with doing ffs_data_reset() before returning to userland.
* a couple of usb callbacks need to force the delayed
transition; unfortunately, they are done in locking environment
that does not allow blocking and ffs_data_reset() can block.
As the result, if these callbacks see FFS_DEACTIVATED, they change
state to FFS_CLOSING and use schedule_work() to get ffs_data_reset()
executed asynchronously.
Unfortunately, the locking is rather insufficient. A fix attempted
in e5bf5ee266 ("functionfs: fix the open/removal races") had closed
a bunch of UAF, but it didn't do anything to the callbacks, lacked
barriers in transition from FFS_CLOSING to FFS_READ_DESCRIPTORS
_and_ it had been too heavy-handed in open()/open() serialization -
I've used ffs->mutex for that, and it's being held over actual IO on
ep0, complete with copy_from_user(), etc.
Even more unfortunately, the userland side is apparently racy enough
to have the resulting timing changes (no failures, just a delayed
return of open(2)) disrupt the things quite badly. Userland bugs
or not, it's a clear regression that needs to be dealt with.
Solution is to use a spinlock for serializing these state checks and
transitions - unlike ffs->mutex it can be taken in these callbacks
and it doesn't disrupt the timings in open().
We could introduce a new spinlock, but it's easier to use the one
that is already there (ffs->eps_lock) instead - the locking
environment is safe for it in all affected places.
Since now it is held over all places that alter or check the
open count (ffs->opened), there's no need to keep that atomic_t -
int would serve just fine and it's simpler that way.
Fixes: e5bf5ee266 ("functionfs: fix the open/removal races")
Fixes: 18d6b32fca ("usb: gadget: f_fs: add "no_disconnect" mode") # v4.0
Tested-by: Samuel Wu <wusamuel@google.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge updates related to runtime PM for 6.20-rc1/7.0-rc1:
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
* pm-runtime:
drm: Discard pm_runtime_put() return value
genirq/chip: Change irq_chip_pm_put() return type to void
scsi: ufs: core: Discard pm_runtime_put() return values
platform/chrome: cros_hps_i2c: Discard pm_runtime_put() return value
coresight: Discard pm_runtime_put() return values
hwspinlock: omap: Discard pm_runtime_put() return value
watchdog: rzv2h_wdt: Discard pm_runtime_put() return value
watchdog: rz: Discard pm_runtime_put() return values
media: ccs: Discard pm_runtime_put() return value
drm/imagination: Discard pm_runtime_put() return value
USB: core: Discard pm_runtime_put() return value
Passing IRQF_ONESHOT ensures that the interrupt source is masked until
the secondary (threaded) handler is done. If only a primary handler is
used then the flag makes no sense because the interrupt can not fire
(again) while its handler is running.
The flag also prevents force-threading of the primary handler and the
irq-core will warn about this.
Remove IRQF_ONESHOT from irqflags.
Fixes: 309b6341d5 ("usb: typec: fusb302: Revert incorrect threaded irq fix")
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20260128095540.863589-12-bigeasy@linutronix.de
In clang version 21.1 and later the -Wimplicit-enum-enum-cast warning
option has been introduced. This warning is enabled by default and can
be used to catch .queuecommand() implementations that return another
value than 0 or one of the SCSI_MLQUEUE_* constants. Hence this patch
that changes the return type of the .queuecommand() implementations from
'int' into 'enum scsi_qc_status'. No functionality has been changed.
Cc: Damien Le Moal <dlemoal@kernel.org>
Cc: John Garry <john.g.garry@oracle.com>
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Link: https://patch.msgid.link/20260115210357.2501991-6-bvanassche@acm.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove <linux/hex.h> from <linux/kernel.h> and update all users/callers of
hex.h interfaces to directly #include <linux/hex.h> as part of the process
of putting kernel.h on a diet.
Removing hex.h from kernel.h means that 36K C source files don't have to
pay the price of parsing hex.h for the roughly 120 C source files that
need it.
This change has been build-tested with allmodconfig on most ARCHes. Also,
all users/callers of <linux/hex.h> in the entire source tree have been
updated if needed (if not already #included).
Link: https://lkml.kernel.org/r/20251215005206.2362276-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Yury Norov (NVIDIA) <yury.norov@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
xhci_sideband_remove_endpoint() incorrecly assumes that the endpoint is
running and has a valid transfer ring.
Lianqin reported a crash during suspend/wake-up stress testing, and
found the cause to be dereferencing a non-existing transfer ring
'ep->ring' during xhci_sideband_remove_endpoint().
The endpoint and its ring may be in unknown state if this function
is called after xHCI was reinitialized in resume (lost power), or if
device is being re-enumerated, disconnected or endpoint already dropped.
Fix this by both removing unnecessary ring access, and by checking
ep->ring exists before dereferencing it. Also make sure endpoint is
running before attempting to stop it.
Remove the xhci_initialize_ring_info() call during sideband endpoint
removal as is it only initializes ring structure enqueue, dequeue and
cycle state values to their starting values without changing actual
hardware enqueue, dequeue and cycle state. Leaving them out of sync
is worse than leaving it as it is. The endpoint will get freed in after
this in most usecases.
If the (audio) class driver want's to reuse the endpoint after offload
then it is up to the class driver to ensure endpoint is properly set up.
Reported-by: 胡连勤 <hulianqin@vivo.com>
Closes: https://lore.kernel.org/linux-usb/TYUPR06MB6217B105B059A7730C4F6EC8D2B9A@TYUPR06MB6217.apcprd06.prod.outlook.com/
Tested-by: 胡连勤 <hulianqin@vivo.com>
Fixes: de66754e9f ("xhci: sideband: add initial api to register a secondary interrupter entity")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://patch.msgid.link/20260115233758.364097-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Johan writes:
USB serial fix for 6.19-rc6
Here's a fix for an f81232 enumeration issue that could prevent some
ports from being enabled (e.g. during driver rebind).
Included are also some new device ids.
All have been in linux-next with no reported issues.
* tag 'usb-serial-6.19-rc6' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
USB: serial: f81232: fix incomplete serial port generation
USB: serial: ftdi_sio: add support for PICAXE AXE027 cable
USB: serial: option: add Telit LE910 MBIM composition
Based on the reality[1][2] that vb2_dma_sg_alloc() can't alloc buffer with
device DMA limits, those device will always get below error: "swiotlb
buffer is full (sz: 393216 bytes), total 65536 (slots), used 2358 (slots)"
and the uvc gadget function can't work at all.
The videobuf2-dma-sg.c driver doesn't has a formal improve about this issue
till now. For UVC gadget, the videobuf2 subsystem doesn't do dma_map() on
vmalloc returned big buffer when allocate the video buffers, however, it do
it for dma_sg returned buffer. So the issue happens for vb2_dma_sg_alloc().
To workaround the issue, lets retry vb2_reqbufs() with
vb_vmalloc_memops if it fails to allocate buffer with vb2_dma_sg_memops.
If use vmalloced buffer, UVC gadget will allocate some small buffers for
each usb_request to do dma transfer, then uvc driver will memcopy data
from big buffer to small buffer.
Link[1]: https://lore.kernel.org/linux-media/20230828075420.2009568-1-anle.pan@nxp.com/
Link[2]: https://lore.kernel.org/linux-media/20230914145812.12851-1-hui.fang@nxp.com/
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-4-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to USB specification:
For full-/high-speed isochronous endpoints, the bInterval value is
used as the exponent for a 2^(bInterval-1) value.
To correctly convert bInterval as interval_duration:
interval_duration = 2^(bInterval-1) * frame_interval
Because the unit of video->interval is 100ns, add a comment info to
make it clear.
Fixes: 48dbe73117 ("usb: gadget: uvc: set req_size and n_requests based on the frame interval")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-2-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Current req_payload_size calculation has 2 issue:
(1) When the first time calculate req_payload_size for all the buffers,
reqs_per_frame = 0 will be the divisor of DIV_ROUND_UP(). So
the result is undefined.
This happens because VIDIOC_STREAMON is always executed after
VIDIOC_QBUF. So video->reqs_per_frame will be 0 until VIDIOC_STREAMON
is run.
(2) The buf->req_payload_size may be bigger than max_req_size.
Take YUYV pixel format as example:
If bInterval = 1, video->interval = 666666, high-speed:
video->reqs_per_frame = 666666 / 1250 = 534
720p: buf->req_payload_size = 1843200 / 534 = 3452
1080p: buf->req_payload_size = 4147200 / 534 = 7766
Based on such req_payload_size, the controller can't run normally.
To fix above issue, assign max_req_size to buf->req_payload_size when
video->reqs_per_frame = 0. And limit buf->req_payload_size to
video->req_size if it's large than video->req_size. Since max_req_size
is used at many place, add it to struct uvc_video and set the value once
endpoint is enabled.
Fixes: 98ad032915 ("usb: gadget: uvc: set req_length based on payload by nreqs instead of req_size")
Cc: stable@vger.kernel.org
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Link: https://patch.msgid.link/20260113-uvc-gadget-fix-patch-v2-1-62950ef5bcb5@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ignore USB role switches if dwc3-apple is already in the desired state.
The USB-C port controller on M2 and M1/M2 Pro/Max/Ultra devices issues
additional interrupts which result in USB role switches to the already
active role.
Ignore these USB role switches to ensure the USB-C port controller and
dwc3-apple are always in a consistent state. This matches the behaviour
in __dwc3_set_mode() in core.c.
Fixes detecting USB 2.0 and 3.x devices on the affected systems. The
reset caused by the additional role switch appears to leave the USB
devices in a state which prevents detection when the phy and dwc3 is
brought back up again.
Fixes: 0ec946d32e ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Janne Grunau <j@jannau.net>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Tested-by: Sven Peter <sven@kernel.org> # M1 mac mini and macbook air
Link: https://patch.msgid.link/20260109-apple-dwc3-role-switch-v1-1-11623b0f6222@jannau.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When some wake IRQs are disabled in the device tree, the corresponding
interrupt entries are removed from DT. In such cases, the driver
currently calls platform_get_irq(), which returns -ENXIO and logs
an error like:
tegra-xusb 3610000.usb: error -ENXIO: IRQ index 2 not found
However, not all wake IRQs are mandatory. The hardware can operate
normally even if some wake sources are not defined in DT. To avoid this
false alarm and allow missing wake IRQs gracefully, use
platform_get_irq_optional() instead of platform_get_irq().
Fixes: 5df186e2ef ("usb: xhci: tegra: Support USB wakeup function for Tegra234")
Cc: stable <stable@kernel.org>
Signed-off-by: Wayne Chang <waynec@nvidia.com>
Signed-off-by: Wei-Cheng Chen <weichengc@nvidia.com>
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Link: https://patch.msgid.link/20260112145653.95691-1-weichengc@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 9beeee6584 ("USB: EHCI: log a warning if ehci-hcd is not
loaded first") said that ehci-hcd should be loaded before ohci-hcd and
uhci-hcd. However, commit 05c92da0c5 ("usb: ohci/uhci - add soft
dependencies on ehci_pci") only makes ohci-pci/uhci-pci depend on ehci-
pci, which is not enough and we may still see the warnings in boot log.
To eliminate the warnings we should make ohci-hcd/uhci-hcd depend on
ehci-hcd. But Alan said that the warning introduced by 9beeee6584
is bogus, we only need the soft dependencies in the PCI level rather
than the HCD level.
However, there is really another neccessary soft dependencies between
ohci-platform/uhci-platform and ehci-platform, which is added by this
patch. The boot logs are below.
1. ohci-platform loaded before ehci-platform:
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 1
ohci-platform 1f058000.usb: irq 28, io mem 0x1f058000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
usb 1-4: new low-speed USB device number 2 using ohci-platform
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 2
ehci-platform 1f050000.usb: irq 29, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
usb 1-4: device descriptor read/all, error -62
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 1-4: new low-speed USB device number 3 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb1/1-4/1-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
2. ehci-platform loaded before ohci-platform:
ehci-platform 1f050000.usb: EHCI Host Controller
ehci-platform 1f050000.usb: new USB bus registered, assigned bus number 1
ehci-platform 1f050000.usb: irq 28, io mem 0x1f050000
ehci-platform 1f050000.usb: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ohci-platform 1f058000.usb: Generic Platform OHCI controller
ohci-platform 1f058000.usb: new USB bus registered, assigned bus number 2
ohci-platform 1f058000.usb: irq 29, io mem 0x1f058000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
usb 2-4: new low-speed USB device number 2 using ohci-platform
input: YSPRINGTECH USB OPTICAL MOUSE as /devices/platform/bus@10000000/1f058000.usb/usb2/2-4/2-4:1.0/0003:10C4:8105.0001/input/input0
hid-generic 0003:10C4:8105.0001: input,hidraw0: USB HID v1.11 Mouse [YSPRINGTECH USB OPTICAL MOUSE] on usb-1f058000.usb-4/input0
In the later case, there is no re-connection for USB-1.0/1.1 devices,
which is expected.
Cc: stable <stable@kernel.org>
Reported-by: Shengwen Xiao <atzlinux@sina.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://patch.msgid.link/20260112084802.1995923-1-chenhuacai@loongson.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that the upstream code has been getting broader test coverage by our
users we occasionally see issues with USB2 devices plugged in during boot.
Before Linux is running, the USB2 PHY has usually been running in device
mode and it turns out that sometimes host->device or device->host
transitions don't work.
The root cause: If the role inside the USB2 PHY is re-configured when it
has already been powered on or when dwc3 has already enabled the ULPI
interface the new configuration sometimes doesn't take affect until dwc3
is reset again. Fix this rare issue by configuring the role much earlier.
Note that the USB3 PHY does not suffer from this issue and actually
requires dwc3 to be up before the correct role can be configured there.
Reported-by: James Calligeros <jcalligeros99@gmail.com>
Reported-by: Janne Grunau <j@jannau.net>
Fixes: 0ec946d32e ("usb: dwc3: Add Apple Silicon DWC3 glue layer driver")
Cc: stable <stable@kernel.org>
Tested-by: Janne Grunau <j@jannau.net>
Reviewed-by: Janne Grunau <j@jannau.net>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: Sven Peter <sven@kernel.org>
Link: https://patch.msgid.link/20260109-dwc3-apple-usb2phy-fix-v2-1-ab6b041e3b26@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Fintek F81532A/534A/535/536 family relies on the
F81534A_CTRL_CMD_ENABLE_PORT (116h) register during initialization to
both determine serial port status and control port creation. If the
driver experiences fast load/unload cycles, the device state may becomes
unstable, resulting in the incomplete generation of serial ports.
Performing a dummy read operation on the register prior to the initial
write command resolves the issue. This clears the device's stale internal
state. Subsequent write operations will correctly generate all serial
ports.
This patch also removes the retry loop in f81534a_ctrl_set_register()
because the stale state has been fixed.
Tested on: HygonDM1SLT(Hygon C86 3250 8-core Processor)
Signed-off-by: Ji-Ze Hong (Peter Hong) <peter_hong@fintek.com.tw>
Signed-off-by: Johan Hovold <johan@kernel.org>
To allow the return type of pm_runtime_put() to be changed to void in the
future, modify usb_autopm_put_interface_async() to discard the return
value of pm_runtime_put().
That value is merely used in a debug comment printed by the function in
question and it is not a particularly useful piece of information
because pm_runtime_put() does not guarantee that the device will be
suspended even if it successfully queues up a work item to check
whether or not the device can be suspended.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/5058509.GXAFRqVoOG@rafael.j.wysocki
Johan Hovold <johan@kernel.org> says:
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Link: https://lore.kernel.org/r/20251222152204.2846-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3e082978c3.
The new buffer management code has not been tested or reviewed properly
and breaks boot of machines like the Lenovo ThinkPad X13s:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000000
CPU: 0 UID: 0 PID: 813 Comm: kworker/0:3 Not tainted 6.19.0-rc2 #26 PREEMPT
Hardware name: LENOVO 21BYZ9SRUS/21BYZ9SRUS, BIOS N3HET87W (1.59 ) 12/05/2023
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call trace:
ucsi_sync_control_common+0xe4/0x1ec [typec_ucsi] (P)
ucsi_run_command+0xcc/0x194 [typec_ucsi]
ucsi_send_command_common+0x84/0x2a0 [typec_ucsi]
ucsi_get_connector_status+0x48/0x78 [typec_ucsi]
ucsi_handle_connector_change+0x5c/0x4f4 [typec_ucsi]
process_one_work+0x208/0x60c
worker_thread+0x244/0x388
The new code completely ignores concurrency so that the message length
can be updated while a transaction is ongoing. In the above case, the
length ends up being modified by another thread while processing an ack
so that the NULL cci pointer is dereferenced.
Fixing this will require designing a proper interface for managing these
transactions, something which most likely involves reverting most of the
offending commit anyway.
Revert the broken code to fix the regression and let Intel come up with
a properly tested implementation for a later kernel.
Fixes: 3e082978c3 ("usb: typec: ucsi: Update UCSI structure to have message in and message out fields")
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20251222152204.2846-5-johan@kernel.org
A recent change fixing a device reference leak in a UDC driver
introduced a potential use-after-free in the non-OF case as the
isp1301_get_client() helper only increases the reference count for the
returned I2C device in the OF case.
Increment the reference count also for non-OF so that the caller can
decrement it unconditionally.
Note that this is inherently racy just as using the returned I2C device
is since nothing is preventing the PHY driver from being unbound while
in use.
Fixes: c84117912b ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-3-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A recent change fixing a device reference leak introduced a clock
imbalance by reusing an error path so that the clock may be disabled
before having been enabled.
Note that the clock framework allows for passing in NULL clocks so there
is no risk for a NULL pointer dereference.
Also drop the bogus I2C client NULL check added by the offending commit
as the pointer has already been verified to be non-NULL.
Fixes: c84117912b ("USB: lpc32xx_udc: Fix error handling in probe")
Cc: stable@vger.kernel.org
Cc: Ma Ke <make24@iscas.ac.cn>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251218153519.19453-2-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add missing null check for cci parameter before dereferencing it in
ucsi_sync_control_common(). The function can be called with cci=NULL
from ucsi_acknowledge(), which leads to a null pointer dereference
when accessing *cci in the condition check.
The crash occurs because the code checks if cci is not null before
calling ucsi->ops->read_cci(ucsi, cci), but then immediately
dereferences cci without a null check in the following condition:
(*cci & UCSI_CCI_COMMAND_COMPLETE).
KASAN trace:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:ucsi_sync_control_common+0x2ae/0x4e0 [typec_ucsi]
Cc: stable <stable@kernel.org>
Fixes: 667ecac558 ("usb: typec: ucsi: return CCI and message from sync_control callback")
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Link: https://patch.msgid.link/20251216122210.5457-1-superm1@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lpc32xx_udc_probe() acquires an i2c_client reference through
isp1301_get_client() but fails to release it in both error handling
paths and the normal removal path. This could result in a reference
count leak for the I2C device, preventing proper cleanup and potentially
leading to resource exhaustion. Add put_device() to release the
reference in the probe failure path and in the remove function.
Calling path: isp1301_get_client() -> of_find_i2c_device_by_node() ->
i2c_find_device_by_fwnode(). As comments of i2c_find_device_by_fwnode()
says, 'The user must call put_device(&client->dev) once done with the
i2c client.'
Found by code review.
Cc: stable <stable@kernel.org>
Fixes: 24a28e4283 ("USB: gadget driver for LPC32xx")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Link: https://patch.msgid.link/20251215020931.15324-1-make24@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The delayed work item otg_event is initialized in fsl_otg_conf() and
scheduled under two conditions:
1. When a host controller binds to the OTG controller.
2. When the USB ID pin state changes (cable insertion/removal).
A race condition occurs when the device is removed via fsl_otg_remove():
the fsl_otg instance may be freed while the delayed work is still pending
or executing. This leads to use-after-free when the work function
fsl_otg_event() accesses the already freed memory.
The problematic scenario:
(detach thread) | (delayed work)
fsl_otg_remove() |
kfree(fsl_otg_dev) //FREE| fsl_otg_event()
| og = container_of(...) //USE
| og-> //USE
Fix this by calling disable_delayed_work_sync() in fsl_otg_remove()
before deallocating the fsl_otg structure. This ensures the delayed work
is properly canceled and completes execution prior to memory deallocation.
This bug was identified through static analysis.
Fixes: 0807c500a1 ("USB: add Freescale USB OTG Transceiver driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20251205034831.12846-1-duoming@zju.edu.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Selecting DRM_AUX_HPD_BRIDGE is not possible from a built-in driver when
CONFIG_DRM=m:
WARNING: unmet direct dependencies detected for DRM_AUX_HPD_BRIDGE
Depends on [m]: HAS_IOMEM [=y] && DRM [=m] && DRM_BRIDGE [=y] && OF [=y]
Selected by [y]:
- UCSI_HUAWEI_GAOKUN [=y] && USB_SUPPORT [=y] && TYPEC [=y] && TYPEC_UCSI [=y] && EC_HUAWEI_GAOKUN [=y] && DRM_BRIDGE [=y] && OF [=y]
Add the same dependency we have in similar drivers to work around this.
Fixes: 00327d7f2c ("usb: typec: ucsi: add Huawei Matebook E Go ucsi driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://patch.msgid.link/20251204101111.1035975-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
