Pull sched_ext fixes from Tejun Heo:
- Fix lock imbalance in a corner case of dispatch_to_local_dsq()
- Migration disabled tasks were confusing some BPF schedulers and its
handling had a bug. Fix it and simplify the default behavior by
dispatching them automatically
- ops.tick(), ops.disable() and ops.exit_task() were incorrectly
disallowing kfuncs that require the task argument to be the rq
operation is currently operating on and thus is rq-locked.
Allow them.
- Fix autogroup migration handling bug which was occasionally
triggering a warning in the cgroup migration path
- tools/sched_ext, selftest and other misc updates
* tag 'sched_ext-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Use SCX_CALL_OP_TASK in task_tick_scx
sched_ext: Fix the incorrect bpf_list kfunc API in common.bpf.h.
sched_ext: selftests: Fix grammar in tests description
sched_ext: Fix incorrect assumption about migration disabled tasks in task_can_run_on_remote_rq()
sched_ext: Fix migration disabled handling in targeted dispatches
sched_ext: Implement auto local dispatching of migration disabled tasks
sched_ext: Fix incorrect time delta calculation in time_delta()
sched_ext: Fix lock imbalance in dispatch_to_local_dsq()
sched_ext: selftests/dsp_local_on: Fix selftest on UP systems
tools/sched_ext: Add helper to check task migration state
sched_ext: Fix incorrect autogroup migration detection
sched_ext: selftests/dsp_local_on: Fix sporadic failures
selftests/sched_ext: Fix enum resolution
sched_ext: Include task weight in the error state dump
sched_ext: Fixes typos in comments
Replace the deprecated one-element array with a modern flexible array
member in the struct crb_struct.
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Matt Turner <mattst88@gmail.com>
The problem is that GCC expects 16-byte alignment of the incoming stack
since early 2004, as Maciej found out [1]:
Having actually dug speculatively I can see that the psABI was changed in
GCC 3.5 with commit e5e10fb4a350 ("re PR target/14539 (128-bit long double
improperly aligned)") back in Mar 2004, when the stack pointer alignment
was increased from 8 bytes to 16 bytes, and arch/alpha/kernel/entry.S has
various suspicious stack pointer adjustments, starting with SP_OFF which
is not a whole multiple of 16.
Also, as Magnus noted, "ALPHA Calling Standard" [2] required the same:
D.3.1 Stack Alignment
This standard requires that stacks be octaword aligned at the time a
new procedure is invoked.
However:
- the "normal" kernel stack is always misaligned by 8 bytes, thanks to
the odd number of 64-bit words in 'struct pt_regs', which is the very
first thing pushed onto the kernel thread stack;
- syscall, fault, interrupt etc. handlers may, or may not, receive aligned
stack depending on numerous factors.
Somehow we got away with it until recently, when we ended up with
a stack corruption in kernel/smp.c:smp_call_function_single() due to
its use of 32-byte aligned local data and the compiler doing clever
things allocating it on the stack.
This adds padding between the PAL-saved and kernel-saved registers
so that 'struct pt_regs' have an even number of 64-bit words.
This makes the stack properly aligned for most of the kernel
code, except two handlers which need special threatment.
Note: struct pt_regs doesn't belong in uapi/asm; this should be fixed,
but let's put this off until later.
Link: https://lore.kernel.org/rcu/alpine.DEB.2.21.2501130248010.18889@angie.orcam.me.uk/ [1]
Link: https://bitsavers.org/pdf/dec/alpha/Alpha_Calling_Standard_Rev_2.0_19900427.pdf [2]
Cc: stable@vger.kernel.org
Tested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Tested-by: Magnus Lindholm <linmag7@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Ivan Kokshaysky <ink@unseen.parts>
Signed-off-by: Matt Turner <mattst88@gmail.com>
Pull cgroup fixes from Tejun Heo:
- Fix a race window where a newly forked task could escape cgroup.kill
- Remove incorrectly included steal time from cpu.stat::usage_usec
- Minor update in selftest
* tag 'cgroup-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Remove steal time from usage_usec
selftests/cgroup: use bash in test_cpuset_v1_hp.sh
cgroup: fix race between fork and cgroup.kill
Pull workqueue fix from Tejun Heo:
- Fix a regression where a worker pool can be freed before rescuer
workers are done with it leading to user-after-free
* tag 'wq-for-6.14-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: Put the pwq after detaching the rescuer from the pool
Pull arm64 fixes from Will Deacon:
- Fix kexec and hibernation when using 5-level page-table configuration
- Remove references to non-existent SF8MM4 and SF8MM8 ID register
fields, hooking up hwcaps for the FPRCVT, F8MM4 and F8MM8 fields
instead
- Drop unused .ARM.attributes ELF sections
- Fix array indexing when probing CPU cache topology from firmware
- Fix potential use-after-free in AMU initialisation code
- Work around broken GTDT entries by tolerating excessively large timer
arrays
- Force use of Rust's "softfloat" target to avoid a threatening warning
about the NEON target feature
- Typo fix in GCS documentation and removal of duplicate Kconfig select
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: rust: clean Rust 1.85.0 warning using softfloat target
arm64: Add missing registrations of hwcaps
ACPI: GTDT: Relax sanity checking on Platform Timers array count
arm64: amu: Delay allocating cpumask for AMU FIE support
arm64: cacheinfo: Avoid out-of-bounds write to cacheinfo array
arm64: Handle .ARM.attributes section in linker scripts
arm64/hwcap: Remove stray references to SF8MMx
arm64/gcs: Fix documentation for HWCAP
arm64: Kconfig: Remove selecting replaced HAVE_FUNCTION_GRAPH_RETVAL
arm64: Fix 5-level paging support in kexec/hibernate trampoline
The meta data for a mapped ring buffer contains an array of indexes of all
the subbuffers. The first entry is the reader page, and the rest of the
entries lay out the order of the subbuffers in how the ring buffer link
list is to be created.
The validator currently makes sure that all the entries are within the
range of 0 and nr_subbufs. But it does not check if there are any
duplicates.
While working on the ring buffer, I corrupted this array, where I added
duplicates. The validator did not catch it and created the ring buffer
link list on top of it. Luckily, the corruption was only that the reader
page was also in the writer path and only presented corrupted data but did
not crash the kernel. But if there were duplicates in the writer side,
then it could corrupt the ring buffer link list and cause a crash.
Create a bitmask array with the size of the number of subbuffers. Then
clear it. When walking through the subbuf array checking to see if the
entries are within the range, test if its bit is already set in the
subbuf_mask. If it is, then there is duplicates and fail the validation.
If not, set the corresponding bit and continue.
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250214102820.7509ddea@gandalf.local.home
Fixes: c76883f18e ("ring-buffer: Add test if range of boot buffer is valid")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Currently if __tracing_resize_ring_buffer() returns an error, the
tracing_resize_ringbuffer() returns -ENOMEM. But it may not be a memory
issue that caused the function to fail. If the ring buffer is memory
mapped, then the resizing of the ring buffer will be disabled. But if the
user tries to resize the buffer, it will get an -ENOMEM returned, which is
confusing because there is plenty of memory. The actual error returned was
-EBUSY, which would make much more sense to the user.
Cc: stable@vger.kernel.org
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20250213134132.7e4505d7@gandalf.local.home
Fixes: 117c39200d ("ring-buffer: Introducing ring-buffer mapping functions")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
i2c-host-fixes for v6.14-rc3
- Mukesh and Viken take over maintainership of the Qualcomm I2C
driver.
- Krzysztof Adamski is removed as maintainer of the Axxia I2C
driver.
Pull xen fixes from Juergen Gross:
"Three fixes to xen-swiotlb driver:
- two fixes for issues coming up due to another fix in 6.12
- addition of an __init annotation"
* tag 'for-linus-6.14-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/swiotlb: mark xen_swiotlb_fixup() __init
x86/xen: allow larger contiguous memory regions in PV guests
xen/swiotlb: relax alignment requirements
Fix several issues in partition probing:
- The bailout for a bad partoffset must use put_dev_sector(), since the
preceding read_part_sector() succeeded.
- If the partition table claims a silly sector size like 0xfff bytes
(which results in partition table entries straddling sector boundaries),
bail out instead of accessing out-of-bounds memory.
- We must not assume that the partition table contains proper NUL
termination - use strnlen() and strncmp() instead of strlen() and
strcmp().
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/r/20250214-partition-mac-v1-1-c1c626dffbd5@google.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When flushing the serial port's buffer, uart_flush_buffer() calls
kfifo_reset() but if there is an outstanding DMA transfer then the
completion function will consume data from the kfifo via
uart_xmit_advance(), underflowing and leading to ongoing DMA as the
driver tries to transmit another 2^32 bytes.
This is readily reproduced with serial-generic and amidi sending even
short messages as closing the device on exit will wait for the fifo to
drain and in the underflow case amidi hangs for 30 seconds on exit in
tty_wait_until_sent(). A trace of that gives:
kworker/1:1-84 [001] 51.769423: bprint: serial8250_tx_dma: tx_size=3 fifo_len=3
amidi-763 [001] 51.769460: bprint: uart_flush_buffer: resetting fifo
irq/21-fe530000-76 [000] 51.769474: bprint: __dma_tx_complete: tx_size=3
irq/21-fe530000-76 [000] 51.769479: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294967293
irq/21-fe530000-76 [000] 51.781295: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.781301: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294963197
irq/21-fe530000-76 [000] 51.793131: bprint: __dma_tx_complete: tx_size=4096
irq/21-fe530000-76 [000] 51.793135: bprint: serial8250_tx_dma: tx_size=4096 fifo_len=4294959101
irq/21-fe530000-76 [000] 51.804949: bprint: __dma_tx_complete: tx_size=4096
Since the port lock is held in when the kfifo is reset in
uart_flush_buffer() and in __dma_tx_complete(), adding a flush_buffer
hook to adjust the outstanding DMA byte count is sufficient to avoid the
kfifo underflow.
Fixes: 9ee4b83e51 ("serial: 8250: Add support for dmaengine")
Cc: stable <stable@kernel.org>
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250208124148.1189191-1-jkeeping@inmusicbrands.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The role switch registration and set_role() can happen in parallel as they
are invoked independent of each other. There is a possibility that a driver
might spend significant amount of time in usb_role_switch_register() API
due to the presence of time intensive operations like component_add()
which operate under common mutex. This leads to a time window after
allocating the switch and before setting the registered flag where the set
role notifications are dropped. Below timeline summarizes this behavior
Thread1 | Thread2
usb_role_switch_register() |
| |
---> allocate switch |
| |
---> component_add() | usb_role_switch_set_role()
| | |
| | --> Drop role notifications
| | since sw->registered
| | flag is not set.
| |
--->Set registered flag.|
To avoid this, set the registered flag early on in the switch register
API.
Fixes: b787a3e781 ("usb: roles: don't get/set_role() when usb_role_switch is unregistered")
Cc: stable <stable@kernel.org>
Signed-off-by: Elson Roy Serrao <quic_eserrao@quicinc.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250206193950.22421-1-quic_eserrao@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The behaviour of kthread_create_worker() was recently changed to align
with the one of kthread_create(). The kthread worker is created but not
awaken by default. This is to allow the use of kthread_affine_preferred()
and kthread_bind[_mask]() with kthread workers. In order to keep the
old behaviour and wake the kthread up, kthread_run_worker() must be
used. All the pre-existing users have been converted, except for UVC
that was introduced in the same merge window as the API change.
This results in hangs:
INFO: task UVCG:82 blocked for more than 491 seconds.
Tainted: G T 6.13.0-rc2-00014-gb04e317b5226 #1
task:UVCG state:D stack:0 pid:82
Call Trace:
__schedule
schedule
schedule_preempt_disabled
kthread
? kthread_flush_work
ret_from_fork
ret_from_fork_asm
entry_INT80_32
Fix this with converting UVCG kworker to the new API.
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202502121025.55bfa801-lkp@intel.com
Fixes: f0bbfbd16b ("usb: gadget: uvc: rework to enqueue in pump worker from encoded queue")
Cc: stable <stable@kernel.org>
Cc: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Link: https://lore.kernel.org/r/20250212135514.30539-1-frederic@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
device_del() can lead to new work being scheduled in gadget->work
workqueue. This is observed, for example, with the dwc3 driver with the
following call stack:
device_del()
gadget_unbind_driver()
usb_gadget_disconnect_locked()
dwc3_gadget_pullup()
dwc3_gadget_soft_disconnect()
usb_gadget_set_state()
schedule_work(&gadget->work)
Move flush_work() after device_del() to ensure the workqueue is cleaned
up.
Fixes: 5702f75375 ("usb: gadget: udc-core: move sysfs_notify() to a workqueue")
Cc: stable <stable@kernel.org>
Signed-off-by: Roy Luo <royluo@google.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250204233642.666991-1-royluo@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When usb_control_msg is used in the get_bMaxPacketSize0 function, the
USB pipe does not include the endpoint device number. This can cause
failures when a usb hub port is reinitialized after encountering a bad
cable connection. As a result, the system logs the following error
messages:
usb usb2-port1: cannot reset (err = -32)
usb usb2-port1: Cannot enable. Maybe the USB cable is bad?
usb usb2-port1: attempt power cycle
usb 2-1: new high-speed USB device number 5 using ci_hdrc
usb 2-1: device descriptor read/8, error -71
The problem began after commit 85d07c5562 ("USB: core: Unite old
scheme and new scheme descriptor reads"). There
usb_get_device_descriptor was replaced with get_bMaxPacketSize0. Unlike
usb_get_device_descriptor, the get_bMaxPacketSize0 function uses the
macro usb_rcvaddr0pipe, which does not include the endpoint device
number. usb_get_device_descriptor, on the other hand, used the macro
usb_rcvctrlpipe, which includes the endpoint device number.
By modifying the get_bMaxPacketSize0 function to use usb_rcvctrlpipe
instead of usb_rcvaddr0pipe, the issue can be resolved. This change will
ensure that the endpoint device number is included in the USB pipe,
preventing reinitialization failures. If the endpoint has not set the
device number yet, it will still work because the device number is 0 in
udev.
Cc: stable <stable@kernel.org>
Fixes: 85d07c5562 ("USB: core: Unite old scheme and new scheme descriptor reads")
Signed-off-by: Stefan Eichenberger <stefan.eichenberger@toradex.com>
Reviewed-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250203105840.17539-1-eichest@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a frequent timeout during controller enter/exit from halt state
after toggling the run_stop bit by SW. This timeout occurs when
performing frequent role switches between host and device, causing
device enumeration issues due to the timeout. This issue was not present
when USB2 suspend PHY was disabled by passing the SNPS quirks
(snps,dis_u2_susphy_quirk and snps,dis_enblslpm_quirk) from the DTS.
However, there is a requirement to enable USB2 suspend PHY by setting of
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY bits when controller starts
in gadget or host mode results in the timeout issue.
This commit addresses this timeout issue by ensuring that the bits
GUSB2PHYCFG.ENBLSLPM and GUSB2PHYCFG.SUSPHY are cleared before starting
the dwc3_gadget_run_stop sequence and restoring them after the
dwc3_gadget_run_stop sequence is completed.
Fixes: 72246da40f ("usb: Introduce DesignWare USB3 DRD Driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Selvarasu Ganesan <selvarasu.g@samsung.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20250201163903.459-1-selvarasu.g@samsung.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The fastboot tool for communicating with Android bootloaders does not
work reliably with this device if USB 2 Link Power Management (LPM)
is enabled.
Various fastboot commands are affected, including the
following, which usually reproduces the problem within two tries:
fastboot getvar kernel
getvar:kernel FAILED (remote: 'GetVar Variable Not found')
This issue was hidden on many systems up until commit 63a1f84549
("xhci: stored cached port capability values in one place") as the xhci
driver failed to detect USB 2 LPM support if USB 3 ports were listed
before USB 2 ports in the "supported protocol capabilities".
Adding the quirk resolves the issue. No drawbacks are expected since
the device uses different USB product IDs outside of fastboot mode, and
since fastboot commands worked before, until LPM was enabled on the
tested system by the aforementioned commit.
Based on a patch from Forest <forestix@nom.one> from which most of the
code and commit message is taken.
Cc: stable <stable@kernel.org>
Reported-by: Forest <forestix@nom.one>
Closes: https://lore.kernel.org/hk8umj9lv4l4qguftdq1luqtdrpa1gks5l@sonic.net
Tested-by: Forest <forestix@nom.one>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250206151836.51742-1-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If we receive an initial fragment of size 8 bytes which specifies a wLength
of 1 byte (so the reassembled message is supposed to be 9 bytes long), and
we then receive a second fragment of size 9 bytes (which is not supposed to
happen), we currently wrongly bypass the fragment reassembly code but still
pass the pointer to the acm->notification_buffer to
acm_process_notification().
Make this less wrong by always going through fragment reassembly when we
expect more fragments.
Before this patch, receiving an overlong fragment could lead to `newctrl`
in acm_process_notification() being uninitialized data (instead of data
coming from the device).
Cc: stable <stable@kernel.org>
Fixes: ea2583529c ("cdc-acm: reassemble fragmented notifications")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If the first fragment is shorter than struct usb_cdc_notification, we can't
calculate an expected_size. Log an error and discard the notification
instead of reading lengths from memory outside the received data, which can
lead to memory corruption when the expected_size decreases between
fragments, causing `expected_size - acm->nb_index` to wrap.
This issue has been present since the beginning of git history; however,
it only leads to memory corruption since commit ea2583529c
("cdc-acm: reassemble fragmented notifications").
A mitigating factor is that acm_ctrl_irq() can only execute after userspace
has opened /dev/ttyACM*; but if ModemManager is running, ModemManager will
do that automatically depending on the USB device's vendor/product IDs and
its other interfaces.
Cc: stable <stable@kernel.org>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver supports page faults on PCI RID since commit <9f831c16c69e>
("iommu/vt-d: Remove the pasid present check in prq_event_thread") by
allowing the reporting of page faults with the pasid_present field cleared
to the upper layer for further handling. The fundamental assumption here
is that the detach or replace operations act as a fence for page faults.
This implies that all pending page faults associated with a specific RID
or PASID are flushed when a domain is detached or replaced from a device
RID or PASID.
However, the intel_iommu_drain_pasid_prq() helper does not correctly
handle faults for RID. This leads to faults potentially remaining pending
in the iommu hardware queue even after the domain is detached, thereby
violating the aforementioned assumption.
Fix this issue by extending intel_iommu_drain_pasid_prq() to cover faults
for RID.
Fixes: 9f831c16c6 ("iommu/vt-d: Remove the pasid present check in prq_event_thread")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20250121023150.815972-1-baolu.lu@linux.intel.com
Reviewed-by: Yi Liu <yi.l.liu@intel.com>
Link: https://lore.kernel.org/r/20250211005512.985563-2-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
With recent kernel, AMDGPU failed to resume after suspend on certain laptop.
Sample log:
-----------
Nov 14 11:52:19 Thinkbook kernel: iommu ivhd0: AMD-Vi: Event logged [ILLEGAL_DEV_TABLE_ENTRY device=0000:06:00.0 pasid=0x00000 address=0x135300000 flags=0x0080]
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[0]: 7d90000000000003
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[1]: 0000100103fc0009
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[2]: 2000000117840013
Nov 14 11:52:19 Thinkbook kernel: AMD-Vi: DTE[3]: 0000000000000000
This is because in resume path, CNTRL[EPHEn] is not set. Fix this by
setting CNTRL[EPHEn] to 1 in resume path if EFR[EPHSUP] is set.
Note
May be better approach is to save the control register in suspend path
and restore it in resume path instead of trying to set indivisual
bits. We will have separate patch for that.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219499
Fixes: c4cb231111 ("iommu/amd: Add support for enable/disable IOPF")
Tested-by: Hamish McIntyre-Bhatty <kernel-bugzilla@regd.hamishmb.com>
Signed-off-by: Vasant Hegde <vasant.hegde@amd.com>
Link: https://lore.kernel.org/r/20250127094411.5931-1-vasant.hegde@amd.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Pull drm fixes from Dave Airlie:
"Weekly drm fixes pull request, nothing too unusual, the hdmi tests
needs a bit of refactoring after lockdep shouted at them, otherwise
amdgpu and xe lead and a few misc otherwise.
amdgpu:
- Fix shutdown regression on old APUs
- Fix compute queue hang on gfx9 APUs
- Fix possible invalid access in PSP failure path
- Avoid possible buffer overflow in pptable override
amdkfd:
- Properly free gang bo in failure path
- GFX12 trap handler fix
i915:
- selftest fix: avoid using uninitialized context
xe:
- Remove bo->clients out of bos_lock area
- Carve out wopcm portion from the stolen memory
tests:
- fix lockdep with hdmi infrastructure tests
host1x:
- fix uninitialised mutex usage
panthor:
- fix uninit variable
hibmc:
- fix missing Kconfig select"
* tag 'drm-fixes-2025-02-14' of https://gitlab.freedesktop.org/drm/kernel:
drm: Fix DSC BPP increment decoding
drm/amdgpu: avoid buffer overflow attach in smu_sys_set_pp_table()
drm/amdkfd: Ensure consistent barrier state saved in gfx12 trap handler
drm/amdgpu: bail out when failed to load fw in psp_init_cap_microcode()
amdkfd: properly free gang_ctx_bo when failed to init user queue
drm/amdgpu: bump version for RV/PCO compute fix
drm/amdgpu/gfx9: manually control gfxoff for CS on RV
drm/amdgpu/pm: fix UVD handing in amdgpu_dpm_set_powergating_by_smu()
drm/xe: Carve out wopcm portion from the stolen memory
drm/i915/selftests: avoid using uninitialized context
drm/xe/client: bo->client does not need bos_lock
drm/hisilicon/hibmc: select CONFIG_DRM_DISPLAY_DP_HELPER
drm/panthor: avoid garbage value in panthor_ioctl_dev_query()
gpu: host1x: Fix a use of uninitialized mutex
drm/tests: hdmi: Fix recursive locking
drm/tests: hdmi: Reorder DRM entities variables assignment
drm/tests: hdmi: Remove redundant assignments
drm/tests: hdmi: Fix WW_MUTEX_SLOWPATH failures
Pull spi fixes from Mark Brown:
"A small collection of driver specific fixes, none standing out in
particular"
* tag 'spi-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sn-f-ospi: Fix division by zero
spi: pxa2xx: Fix regression when toggling chip select on LPSS devices
spi: atmel-quadspi: Fix warning in doc-comment
Pull regulator fixes from Mark Brown:
"The main change here is a revert for a cleanup that was done in the
core, attempting to resolve some confusion about how we handle systems
where we've somehow managed to end up with both platform data and
device tree data for the same device. Unfortunately it turns out there
are actually a few systems that deliberately do this and were broken
by the change so we've just reverted it.
There's also a new Qualcomm device ID"
* tag 'regulator-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: core: let dt properties override driver init_data
regulator: qcom_smd: Add l2, l5 sub-node to mp5496 regulator
Pull regmap fix from Mark Brown:
"A simple fix for memory leaks when deallocating regmap-irq
controllers"
* tag 'regmap-fix-v6.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap-irq: Add missing kfree()
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
Pull btrfs fixes from David Sterba:
- fix stale page cache after race between readahead and direct IO write
- fix hole expansion when writing at an offset beyond EOF, the range
will not be zeroed
- use proper way to calculate offsets in folio ranges
* tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix hole expansion when writing at an offset beyond EOF
btrfs: fix stale page cache after race between readahead and direct IO write
btrfs: fix two misuses of folio_shift()
Pull bcachefs fixes from Kent Overstreet:
"Just small stuff.
As a general announcement, on disk format is now frozen in my master
branch - future on disk format changes will be optional, not required.
- More fixes for going read-only: the previous fix was insufficient,
but with more work on ordering journal reclaim flushing (and a
btree node accounting fix so we don't split until we have to) the
tiering_replication test now consistently goes read-only in less
than a second.
- fix for fsck when we have reflink pointers to missing indirect
extents
- some transaction restart handling fixes from Alan; the "Pass
_orig_restart_count to trans_was_restarted" likely fixes some rare
undefined behaviour heisenbugs"
* tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs:
bcachefs: Reuse transaction
bcachefs: Pass _orig_restart_count to trans_was_restarted
bcachefs: CONFIG_BCACHEFS_INJECT_TRANSACTION_RESTARTS
bcachefs: Fix want_new_bset() so we write until the end of the btree node
bcachefs: Split out journal pins by btree level
bcachefs: Fix use after free
bcachefs: Fix marking reflink pointers to missing indirect extents
If userspace creates vcpus, then a vgic, we end-up in a situation
where irqchip_in_kernel() will return true, but no private interrupt
has been allocated for these vcpus. This situation will continue
until userspace initialises the vgic, at which point we fix the
early vcpus. Should a vcpu run or be initialised in the interval,
bad things may happen.
An obvious solution is to move this fix-up phase to the point where
the vgic is created. This ensures that from that point onwards,
all vcpus have their private interrupts, as new vcpus will directly
allocate them.
With that, we have the invariant that when irqchip_in_kernel() is
true, all vcpus have their private interrupts.
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250212182558.2865232-3-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
We currently spit out a warning if making a timer interrupt pending
fails. But not only this is loud and easy to trigger from userspace,
we also fail to do anything useful with that information.
Dropping the warning is the easiest thing to do for now. We can
always add error reporting if we really want in the future.
Reported-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20250212182558.2865232-2-maz@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
