As it turns out, tests sometimes fail. When that is the case, packing
the test assertion with as much relevant information helps track down
the problem more quickly.
Sharpen up the stat descriptor assertions in kvm_binary_stats_test to
more precisely describe the reason for the test assertion and which
stat is to blame.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-3-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In order to provide more useful test assertions that describe the broken
stats descriptor, perform sanity check on the stat name before any other
descriptor field. While at it, avoid dereferencing the name field if the
sanity check fails as it is more likely to contain garbage.
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Message-Id: <20220719143134.3246798-2-oliver.upton@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM/arm64 updates for 5.20:
- Unwinder implementations for both nVHE modes (classic and
protected), complete with an overflow stack
- Rework of the sysreg access from userspace, with a complete
rewrite of the vgic-v3 view to allign with the rest of the
infrastructure
- Disagregation of the vcpu flags in separate sets to better track
their use model.
- A fix for the GICv2-on-v3 selftest
- A small set of cosmetic fixes
KVM/s390, KVM/x86 and common infrastructure changes for 5.20
x86:
* Permit guests to ignore single-bit ECC errors
* Fix races in gfn->pfn cache refresh; do not pin pages tracked by the cache
* Intel IPI virtualization
* Allow getting/setting pending triple fault with KVM_GET/SET_VCPU_EVENTS
* PEBS virtualization
* Simplify PMU emulation by just using PERF_TYPE_RAW events
* More accurate event reinjection on SVM (avoid retrying instructions)
* Allow getting/setting the state of the speaker port data bit
* Refuse starting the kvm-intel module if VM-Entry/VM-Exit controls are inconsistent
* "Notify" VM exit (detect microarchitectural hangs) for Intel
* Cleanups for MCE MSR emulation
s390:
* add an interface to provide a hypervisor dump for secure guests
* improve selftests to use TAP interface
* enable interpretive execution of zPCI instructions (for PCI passthrough)
* First part of deferred teardown
* CPU Topology
* PV attestation
* Minor fixes
Generic:
* new selftests API using struct kvm_vcpu instead of a (vm, id) tuple
x86:
* Use try_cmpxchg64 instead of cmpxchg64
* Bugfixes
* Ignore benign host accesses to PMU MSRs when PMU is disabled
* Allow disabling KVM's "MONITOR/MWAIT are NOPs!" behavior
* x86/MMU: Allow NX huge pages to be disabled on a per-vm basis
* Port eager page splitting to shadow MMU as well
* Enable CMCI capability by default and handle injected UCNA errors
* Expose pid of vcpu threads in debugfs
* x2AVIC support for AMD
* cleanup PIO emulation
* Fixes for LLDT/LTR emulation
* Don't require refcounted "struct page" to create huge SPTEs
x86 cleanups:
* Use separate namespaces for guest PTEs and shadow PTEs bitmasks
* PIO emulation
* Reorganize rmap API, mostly around rmap destruction
* Do not workaround very old KVM bugs for L0 that runs with nesting enabled
* new selftests API for CPUID
Add a command line option to dirty_log_perf_test to run vCPUs for the
entire duration of disabling dirty logging. By default, the test stops
running runs vCPUs before disabling dirty logging, which is faster but
less interesting as it doesn't stress KVM's handling of contention
between page faults and the zapping of collapsible SPTEs. Enabling the
flag also lets the user verify that KVM is indeed rebuilding zapped SPTEs
as huge pages by checking KVM's pages_{1g,2m,4k} stats. Without vCPUs to
fault in the zapped SPTEs, the stats will show that KVM is zapping pages,
but they never show whether or not KVM actually allows huge pages to be
recreated.
Note! Enabling the flag can _significantly_ increase runtime, especially
if the thread that's disabling dirty logging doesn't have a dedicated
pCPU, e.g. if all pCPUs are used to run vCPUs.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220715232107.3775620-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull kvm fixes from Paolo Bonzini:
- Check for invalid flags to KVM_CAP_X86_USER_SPACE_MSR
- Fix use of sched_setaffinity in selftests
- Sync kernel headers to tools
- Fix KVM_STATS_UNIT_MAX
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Protect the unused bits in MSR exiting flags
tools headers UAPI: Sync linux/kvm.h with the kernel sources
KVM: selftests: Fix target thread to be migrated in rseq_test
KVM: stats: Fix value for KVM_STATS_UNIT_MAX for boolean stats
When building selftests out of the kernel tree the gpio.h the include
path is incorrect and the build falls back to the system includes
which may be outdated.
Add the KHDR_INCLUDES to the CFLAGS to include the gpio.h from the
build tree.
Fixes: 4f4d0af7b2 ("selftests: gpio: restore CFLAGS options")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kent Gibson <warthog618@gmail.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Silence this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In rseq_test, there are two threads, which are vCPU thread and migration
worker separately. Unfortunately, the test has the wrong PID passed to
sched_setaffinity() in the migration worker. It forces migration on the
migration worker because zeroed PID represents the calling thread, which
is the migration worker itself. It means the vCPU thread is never enforced
to migration and it can migrate at any time, which eventually leads to
failure as the following logs show.
host# uname -r
5.19.0-rc6-gavin+
host# # cat /proc/cpuinfo | grep processor | tail -n 1
processor : 223
host# pwd
/home/gavin/sandbox/linux.main/tools/testing/selftests/kvm
host# for i in `seq 1 100`; do \
echo "--------> $i"; ./rseq_test; done
--------> 1
--------> 2
--------> 3
--------> 4
--------> 5
--------> 6
==== Test Assertion Failure ====
rseq_test.c:265: rseq_cpu == cpu
pid=3925 tid=3925 errno=4 - Interrupted system call
1 0x0000000000401963: main at rseq_test.c:265 (discriminator 2)
2 0x0000ffffb044affb: ?? ??:0
3 0x0000ffffb044b0c7: ?? ??:0
4 0x0000000000401a6f: _start at ??:?
rseq CPU = 4, sched CPU = 27
Fix the issue by passing correct parameter, TID of the vCPU thread, to
sched_setaffinity() in the migration worker.
Fixes: 61e52f1630 ("KVM: selftests: Add a test for KVM_RUN+rseq to detect task migration bugs")
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Oliver Upton <oliver.upton@linux.dev>
Message-Id: <20220719020830.3479482-1-gshan@redhat.com>
Reviewed-by: Andrew Jones <andrew.jones@linux.dev>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On powerpc, 'perf trace' is crashing with a SIGSEGV when trying to
process a perf.data file created with 'perf trace record -p':
#0 0x00000001225b8988 in syscall_arg__scnprintf_augmented_string <snip> at builtin-trace.c:1492
#1 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1492
#2 syscall_arg__scnprintf_filename <snip> at builtin-trace.c:1486
#3 0x00000001225bdd9c in syscall_arg_fmt__scnprintf_val <snip> at builtin-trace.c:1973
#4 syscall__scnprintf_args <snip> at builtin-trace.c:2041
#5 0x00000001225bff04 in trace__sys_enter <snip> at builtin-trace.c:2319
That points to the below code in tools/perf/builtin-trace.c:
/*
* If this is raw_syscalls.sys_enter, then it always comes with the 6 possible
* arguments, even if the syscall being handled, say "openat", uses only 4 arguments
* this breaks syscall__augmented_args() check for augmented args, as we calculate
* syscall->args_size using each syscalls:sys_enter_NAME tracefs format file,
* so when handling, say the openat syscall, we end up getting 6 args for the
* raw_syscalls:sys_enter event, when we expected just 4, we end up mistakenly
* thinking that the extra 2 u64 args are the augmented filename, so just check
* here and avoid using augmented syscalls when the evsel is the raw_syscalls one.
*/
if (evsel != trace->syscalls.events.sys_enter)
augmented_args = syscall__augmented_args(sc, sample, &augmented_args_size, trace->raw_augmented_syscalls_args_size);
As the comment points out, we should not be trying to augment the args
for raw_syscalls. However, when processing a perf.data file, we are not
initializing those properly. Fix the same.
Reported-by: Claudio Carvalho <cclaudio@linux.ibm.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/20220707090900.572584-1-naveen.n.rao@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick up the changes from these csets:
4ad3278df6 ("x86/speculation: Disable RRSBA behavior")
d7caac991f ("x86/cpu/amd: Add Spectral Chicken")
That cause no changes to tooling:
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
$ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
$ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
$ diff -u before after
$
Just silences this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YtQTm9wsB3hxQWvy@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
f43b9876e8 ("x86/retbleed: Add fine grained Kconfig knobs")
a149180fbc ("x86: Add magic AMD return-thunk")
15e67227c4 ("x86: Undo return-thunk damage")
369ae6ffc4 ("x86/retpoline: Cleanup some #ifdefery")
4ad3278df6 x86/speculation: Disable RRSBA behavior
26aae8ccbc x86/cpu/amd: Enumerate BTC_NO
9756bba284 x86/speculation: Fill RSB on vmexit for IBRS
3ebc170068 x86/bugs: Add retbleed=ibpb
2dbb887e87 x86/entry: Add kernel IBRS implementation
6b80b59b35 x86/bugs: Report AMD retbleed vulnerability
a149180fbc x86: Add magic AMD return-thunk
15e67227c4 x86: Undo return-thunk damage
a883d624ae x86/cpufeatures: Move RETPOLINE flags to word 11
5180218615 x86/speculation/mmio: Enumerate Processor MMIO Stale Data bug
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org
Link: https://lore.kernel.org/lkml/YtQM40VmiLTkPND2@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes in:
1b870fa557 ("kvm: stats: tell userspace which values are boolean")
That just rebuilds perf, as these patches don't add any new KVM ioctl to
be harvested for the the 'perf trace' ioctl syscall argument
beautifiers.
This is also by now used by tools/testing/selftests/kvm/, a simple test
build succeeded.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lore.kernel.org/lkml/YtQLDvQrBhJNl3n5@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The current vgic_init test wrongly assumes that the host cannot
multiple versions of the GIC architecture, while v2 emulation
on v3 has almost always been supported (it was supported before
the standalone v3 emulation).
Tweak the test to support multiple GIC incarnations.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Fixes: 3f4db37e20 ("KVM: arm64: selftests: Make vgic_init gic version agnostic")
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Link: https://lore.kernel.org/r/20220714154108.3531213-1-maz@kernel.org
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, bpf and wireless.
Still no major regressions, the release continues to be calm. An
uptick of fixes this time around due to trivial data race fixes and
patches flowing down from subtrees.
There has been a few driver fixes (particularly a few fixes for false
positives due to 66e4c8d950 which went into -next in May!) that make
me worry the wide testing is not exactly fully through.
So "calm" but not "let's just cut the final ASAP" vibes over here.
Current release - regressions:
- wifi: rtw88: fix write to const table of channel parameters
Current release - new code bugs:
- mac80211: add gfp_t arg to ieeee80211_obss_color_collision_notify
- mlx5:
- TC, allow offload from uplink to other PF's VF
- Lag, decouple FDB selection and shared FDB
- Lag, correct get the port select mode str
- bnxt_en: fix and simplify XDP transmit path
- r8152: fix accessing unset transport header
Previous releases - regressions:
- conntrack: fix crash due to confirmed bit load reordering (after
atomic -> refcount conversion)
- stmmac: dwc-qos: disable split header for Tegra194
Previous releases - always broken:
- mlx5e: ring the TX doorbell on DMA errors
- bpf: make sure mac_header was set before using it
- mac80211: do not wake queues on a vif that is being stopped
- mac80211: fix queue selection for mesh/OCB interfaces
- ip: fix dflt addr selection for connected nexthop
- seg6: fix skb checksums for SRH encapsulation/insertion
- xdp: fix spurious packet loss in generic XDP TX path
- bunch of sysctl data race fixes
- nf_log: incorrect offset to network header
Misc:
- bpf: add flags arg to bpf_dynptr_read and bpf_dynptr_write APIs"
* tag 'net-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
nfp: flower: configure tunnel neighbour on cmsg rx
net/tls: Check for errors in tls_device_init
MAINTAINERS: Add an additional maintainer to the AMD XGBE driver
xen/netback: avoid entering xenvif_rx_next_skb() with an empty rx queue
selftests/net: test nexthop without gw
ip: fix dflt addr selection for connected nexthop
net: atlantic: remove aq_nic_deinit() when resume
net: atlantic: remove deep parameter on suspend/resume functions
sfc: fix kernel panic when creating VF
seg6: bpf: fix skb checksum in bpf_push_seg6_encap()
seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviors
seg6: fix skb checksum evaluation in SRH encapsulation/insertion
sfc: fix use after free when disabling sriov
net: sunhme: output link status with a single print.
r8152: fix accessing unset transport header
net: stmmac: fix leaks in probe
net: ftgmac100: Hold reference returned by of_get_child_by_name()
nexthop: Fix data-races around nexthop_compat_mode.
ipv4: Fix data-races around sysctl_ip_dynaddr.
tcp: Fix a data-race around sysctl_tcp_ecn_fallback.
...
Use cpuid() to get CPUID.0x0 in cpu_vendor_string_is(), thus eliminating
the last open coded usage of CPUID (ignoring debug_regs.c, which emits
CPUID from the guest to trigger a VM-Exit and doesn't actually care about
the results of CPUID).
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-42-seanjc@google.com
Provide informative error messages for the various checks related to
requesting access to XSAVE features that are buried behind XSAVE Feature
Disabling (XFD).
Opportunistically rename the helper to have "require" in the name so that
it's somewhat obvious that the helper may skip the test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-41-seanjc@google.com
Skip the AMX test instead of silently returning if the host kernel
doesn't support ARCH_REQ_XCOMP_GUEST_PERM. KVM didn't support XFD until
v5.17, so it's extremely unlikely allowing the test to run on a pre-v5.15
kernel is the right thing to do.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-40-seanjc@google.com
Use kvm_cpu_has() to check for XFD supported in vm_xsave_req_perm(),
simply checking host CPUID doesn't guarantee KVM supports AMX/XFD.
Opportunistically hoist the check above the bit check; if XFD isn't
supported, it's far better to get a "not supported at all" message, as
opposed to a "feature X isn't supported" message".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-39-seanjc@google.com
Rename kvm_get_supported_cpuid_index() to __kvm_get_supported_cpuid_entry()
to better show its relationship to kvm_get_supported_cpuid_entry(), and
because the helper returns a CPUID entry, not the index of an entry.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-37-seanjc@google.com
Use kvm_get_supported_cpuid_entry() instead of
kvm_get_supported_cpuid_index() when passing in '0' for the index, which
just so happens to be the case in all remaining users of
kvm_get_supported_cpuid_index() except kvm_get_supported_cpuid_entry().
Keep the helper as there may be users in the future, and it's not doing
any harm.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-36-seanjc@google.com
Set the function/index for CPUID in the helper instead of relying on the
caller to do so. In addition to reducing the risk of consuming an
uninitialized ECX, having the function/index embedded in the call makes
it easier to understand what is being checked.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-32-seanjc@google.com
Tag the returned CPUID pointers from kvm_get_supported_cpuid(),
kvm_get_supported_hv_cpuid(), and vcpu_get_supported_hv_cpuid() "const"
to prevent reintroducing the broken pattern of modifying the static
"cpuid" variable used by kvm_get_supported_cpuid() to cache the results
of KVM_GET_SUPPORTED_CPUID.
Update downstream consumers as needed.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-31-seanjc@google.com
Use the vCPU's persistent CPUID array directly when manipulating the set
of exposed Hyper-V CPUID features. Drop set_cpuid() to route all future
modification through the vCPU helpers; the Hyper-V features test was the
last user.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-27-seanjc@google.com
Add a new helper, vcpu_clear_cpuid_entry(), to do a RMW operation on the
vCPU's CPUID model to clear a given CPUID entry, and use it to clear
KVM's paravirt feature instead of operating on kvm_get_supported_cpuid()'s
static "cpuid" variable. This also eliminates a user of
the soon-be-defunct set_cpuid() helper.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-26-seanjc@google.com
Use vcpu_clear_cpuid_feature() to the MONITOR/MWAIT CPUID feature bit in
the MONITOR/MWAIT quirk test.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Add a helper to set a vCPU's guest.MAXPHYADDR, and use it in the test
that verifies the emulator returns an error on an unknown instruction
when KVM emulates in response to an EPT violation with a GPA that is
legal in hardware but illegal with respect to the guest's MAXPHYADDR.
Add a helper even though there's only a single user at this time. Before
its removal, mmu_role_test also stuffed guest.MAXPHYADDR, and the helper
provides a small amount of clarity.
More importantly, this eliminates a set_cpuid() user and an instance of
modifying kvm_get_supported_cpuid()'s static "cpuid".
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-25-seanjc@google.com
Add helpers to get a specific CPUID entry for a given vCPU, and to toggle
a specific CPUID-based feature for a vCPU. The helpers will reduce the
amount of boilerplate code needed to tweak a vCPU's CPUID model, improve
code clarity, and most importantly move tests away from modifying the
static "cpuid" returned by kvm_get_supported_cpuid().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-23-seanjc@google.com
Rename get_cpuid() to get_cpuid_entry() to better reflect its behavior.
Leave set_cpuid() as is to avoid unnecessary churn, that helper will soon
be removed entirely.
Oppurtunistically tweak the implementation to avoid using a temporary
variable in anticipation of taggin the input @cpuid with "const".
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-21-seanjc@google.com
Don't use a static variable for the Hyper-V supported CPUID array, the
helper unconditionally reallocates the array on every invocation (and all
callers free the array immediately after use). The array is intentionally
recreated and refilled because the set of supported CPUID features is
dependent on vCPU state, e.g. whether or not eVMCS has been enabled.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-20-seanjc@google.com
Cache a vCPU's CPUID information in "struct kvm_vcpu" to allow fixing the
mess where tests, often unknowingly, modify the global/static "cpuid"
allocated by kvm_get_supported_cpuid().
Add vcpu_init_cpuid() to handle stuffing an entirely different CPUID
model, e.g. during vCPU creation or when switching to the Hyper-V enabled
CPUID model. Automatically refresh the cache on vcpu_set_cpuid() so that
any adjustments made by KVM are always reflected in the cache. Drop
vcpu_get_cpuid() entirely to force tests to use the cache, and to allow
adding e.g. vcpu_get_cpuid_entry() in the future without creating a
conflicting set of APIs where vcpu_get_cpuid() does KVM_GET_CPUID2, but
vcpu_get_cpuid_entry() does not.
Opportunistically convert the VMX nested state test and KVM PV test to
manipulating the vCPU's CPUID (because it's easy), but use
vcpu_init_cpuid() for the Hyper-V features test and "emulator error" test
to effectively retain their current behavior as they're less trivial to
convert.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-19-seanjc@google.com
Split out the computation of the effective size of a kvm_cpuid2 struct
from allocate_kvm_cpuid2(), and modify both to take an arbitrary number
of entries. Future commits will add caching of a vCPU's CPUID model, and
will (a) be able to precisely size the entries array, and (b) will need
to know the effective size of the struct in order to copy to/from the
cache.
Expose the helpers so that the Hyper-V Features test can use them in the
(somewhat distant) future. The Hyper-V test very, very subtly relies on
propagating CPUID info across vCPU instances, and will need to make a
copy of the previous vCPU's CPUID information when it switches to using
the per-vCPU cache. Alternatively, KVM could provide helpers to
duplicate and/or copy a kvm_cpuid2 instance, but each is literally a
single line of code if the helpers are exposed, and it's not like the
size of kvm_cpuid2 is secret knowledge.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-18-seanjc@google.com
In the CPUID test, verify that KVM doesn't modify the kvm_cpuid2.entries
layout, i.e. that the order of entries and their flags is identical
between what the test provides via KVM_SET_CPUID2 and what KVM returns
via KVM_GET_CPUID2.
Asserting that the layouts match simplifies the test as there's no need
to iterate over both arrays.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-17-seanjc@google.com
Use kvm_cpu_has() in the stea-ltime test instead of open coding
equivalent functionality using kvm_get_supported_cpuid_entry().
Opportunistically define all of KVM's paravirt CPUID-based features.
No functional change intended.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20220614200707.3315957-15-seanjc@google.com
