It is useful to be able to know the position of a DIMM in an
interleave-set. Consider the case where the order of the DIMMs changes
causing a namespace to be invalidated because the interleave-set cookie no
longer matches. If the before and after state of each DIMM position is
known this state debugged by the system owner.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Currently libnvdimm uses HPAGE_SIZE as the default alignment for DAX and
PFN devices. HPAGE_SIZE is the default hugetlbfs page size and when
hugetlbfs is disabled it defaults to PAGE_SIZE. Given DAX has more
in common with THP than hugetlbfs we should proably be using
HPAGE_PMD_SIZE, but this is undefined when THP is disabled so lets just
give it a new name.
The other usage of HPAGE_SIZE in libnvdimm is when determining how large
the altmap should be. For the reasons mentioned above it doesn't really
make sense to use HPAGE_SIZE here either. PMD_SIZE seems to be safe to
use in generic code and it happens to match the vmemmap allocation block
on x86 and Power. It's still a hack, but it's a slightly nicer hack.
Signed-off-by: Oliver O'Halloran <oohall@gmail.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
When setting up the Xenstore watch for the memory target size the new
watch will fire at once. Don't try to reach the configured target size
by onlining new memory in this case, as the current memory size will
be smaller in almost all cases due to e.g. BIOS reserved pages.
Onlining new memory will lead to more problems e.g. undesired conflicts
with NVMe devices meant to be operated as block devices.
Instead remember the difference between target size and current size
when the watch fires for the first time and apply it to any further
size changes, too.
In order to avoid races between balloon.c and xen-balloon.c init calls
do the xen-balloon.c initialization from balloon.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
log a message when we enter this situation:
1) we already allocated the max number of available grants from hypervisor
and
2) we still need more (but the request fails because of 1)).
Sometimes the lack of grants causes IO hangs in xen_blkfront devices.
Adding this log would help debuging.
Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Junxiao Bi <junxiao.bi@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Pull tty/serial fixes from Greg KH:
"Here are some small tty and serial driver fixes for 4.13-rc2. Nothing
huge at all, a revert of a patch that turned out to break things, a
fix up for a new tty ioctl we added in 4.13-rc1 to get the uapi
definition correct, and a few minor serial driver fixes for reported
issues.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix TIOCGPTPEER ioctl definition
tty: hide unused pty_get_peer function
tty: serial: lpuart: Fix the logic for detecting the 32-bit type UART
serial: imx: Prevent TX buffer PIO write when a DMA has been started
Revert "serial: imx-serial - move DMA buffer configuration to DT"
serial: sh-sci: Uninitialized variables in sysfs files
serial: st-asc: Potential error pointer dereference
Pull char/misc driver fixes from Greg KH:
"Here are some small char and misc driver fixes for 4.13-rc2. All fix
reported problems with 4.13-rc1 or older kernels (like the binder
fixes). Full details in the shortlog.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
w1: omap-hdq: fix error return code in omap_hdq_probe()
regmap: regmap-w1: Fix build troubles
w1: Fix slave count on 1-Wire bus (resend)
mux: mux-core: unregister mux_class in mux_exit()
mux: remove the Kconfig question for the subsystem
nvmem: rockchip-efuse: amend compatible rk322x-efuse to rk3228-efuse
drivers/fsi: fix fsi_slave_mode prototype
fsi: core: register with postcore_initcall
thunderbolt: Correct access permissions for active NVM contents
vmbus: re-enable channel tasklet
spmi: pmic-arb: Always allocate ppid_to_apid table
MAINTAINERS: Add entry for SPMI subsystem
spmi: Include OF based modalias in device uevent
binder: Use wake up hint for synchronous transactions.
binder: use group leader instead of open thread
Revert "android: binder: Sanity check at binder ioctl"
Pull USB fixes from Greg KH:
"Here are some small USB fixes for 4.13-rc2.
The usual batch, gadget fixes for reported issues, as well as xhci
fixes, and a small random collection of other fixes for reported
issues.
All have been in linux-next with no reported issues"
* tag 'usb-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (25 commits)
xhci: fix memleak in xhci_run()
usb: xhci: fix spinlock recursion for USB2 test mode
xhci: fix 20000ms port resume timeout
usb: xhci: Issue stop EP command only when the EP state is running
xhci: Bad Ethernet performance plugged in ASM1042A host
xhci: Fix NULL pointer dereference when cleaning up streams for removed host
usb: renesas_usbhs: gadget: disable all eps when the driver stops
usb: renesas_usbhs: fix usbhsc_resume() for !USBHSF_RUNTIME_PWCTRL
usb: gadget: udc: renesas_usb3: protect usb3_ep->started in usb3_start_pipen()
usb: gadget: udc: renesas_usb3: fix zlp transfer by the dmac
usb: gadget: udc: renesas_usb3: fix free size in renesas_usb3_dma_free_prd()
usb: gadget: f_uac2: endianness fixes.
usb: gadget: f_uac1: endianness fixes.
include: usb: audio: specify exact endiannes of descriptors
usb: gadget: udc: start_udc() can be static
usb: dwc2: gadget: On USB RESET reset device address to zero
usb: storage: return on error to avoid a null pointer dereference
usb: typec: include linux/device.h in ucsi.h
USB: cdc-acm: add device-id for quirky printer
usb: dwc3: gadget: only unmap requests from DMA if mapped
...
Pull staging driver fixes from Greg KH:
"Here are some small staging driver fixes for reported issues for
4.13-rc2.
Also in here is a new driver, the virtualbox DRM driver. It's
stand-alone and got acks from the DRM developers to go in through this
tree. It's a new thing, but it should be fine for this point in the rc
cycle due to it being independent.
All of this has been in linux-next for a while with no reported
issues"
* tag 'staging-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: rtl8188eu: add TL-WN722N v2 support
staging: speakup: safely register and unregister ldisc
staging: speakup: add functions to register and unregister ldisc
staging: speakup: safely close tty
staging: sm750fb: avoid conflicting vesafb
staging: lustre: ko2iblnd: check copy_from_iter/copy_to_iter return code
staging: vboxvideo: Add vboxvideo to drivers/staging
staging: sm750fb: fixed a assignment typo
staging: rtl8188eu: memory leak in rtw_free_cmd_obj()
staging: vchiq_arm: fix error codes in probe
staging: comedi: ni_mio_common: fix AO timer off-by-one regression
Pull block fixes from Jens Axboe:
"A small set of fixes for -rc2 - two fixes for BFQ, documentation and
code, and a removal of an unused variable in nbd. Outside of that, a
small collection of fixes from the usual crew on the nvme side"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvmet: don't report 0-bytes in serial number
nvmet: preserve controller serial number between reboots
nvmet: Move serial number from controller to subsystem
nvmet: prefix version configfs file with attr
nvme-pci: Fix an error handling path in 'nvme_probe()'
nvme-pci: Remove nvme_setup_prps BUG_ON
nvme-pci: add another device ID with stripe quirk
nvmet-fc: fix byte swapping in nvmet_fc_ls_create_association
nvme: fix byte swapping in the streams code
nbd: kill unused ret in recv_work
bfq: dispatch request to prevent queue stalling after the request completion
bfq: fix typos in comments about B-WF2Q+ algorithm
Pull more rdma fixes from Doug Ledford:
"As per my previous pull request, there were two drivers that each had
a rather large number of legitimate fixes still to be sent.
As it turned out, I also missed a reasonably large set of fixes from
one person across the stack that are all important fixes. All in all,
the bnxt_re, i40iw, and Dan Carpenter are 3/4 to 2/3rds of this pull
request.
There were some other random fixes that I didn't send in the last pull
request that I added to this one. This catches the rdma stack up to
the fixes from up to about the beginning of this week. Any more fixes
I'll wait and batch up later in the -rc cycle. This will give us a
good base to start with for basing a for-next branch on -rc2.
Summary:
- i40iw fixes
- bnxt_re fixes
- Dan Carpenter bugfixes across stack
- ten more random fixes, no more than two from any one person"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma: (37 commits)
RDMA/core: Initialize port_num in qp_attr
RDMA/uverbs: Fix the check for port number
IB/cma: Fix reference count leak when no ipv4 addresses are set
RDMA/iser: don't send an rkey if all data is written as immadiate-data
rxe: fix broken receive queue draining
RDMA/qedr: Prevent memory overrun in verbs' user responses
iw_cxgb4: don't use WR keys/addrs for 0 byte reads
IB/mlx4: Fix CM REQ retries in paravirt mode
IB/rdmavt: Setting of QP timeout can overflow jiffies computation
IB/core: Fix sparse warnings
RDMA/bnxt_re: Fix the value reported for local ack delay
RDMA/bnxt_re: Report MISSED_EVENTS in req_notify_cq
RDMA/bnxt_re: Fix return value of poll routine
RDMA/bnxt_re: Enable atomics only if host bios supports
RDMA/bnxt_re: Specify RDMA component when allocating stats context
RDMA/bnxt_re: Fixed the max_rd_atomic support for initiator and destination QP
RDMA/bnxt_re: Report supported value to IB stack in query_device
RDMA/bnxt_re: Do not free the ctx_tbl entry if delete GID fails
RDMA/bnxt_re: Fix WQE Size posted to HW to prevent it from throwing error
RDMA/bnxt_re: Free doorbell page index (DPI) during dealloc ucontext
...
Pull drm fixes from Dave Airlie:
"A bunch of fixes for rc2: two imx regressions, vc4 fix, dma-buf fix,
some displayport mst fixes, and an amdkfd fix.
Nothing too crazy, I assume we just haven't see much rc1 testing yet"
* tag 'drm-fixes-for-v4.13-rc2' of git://people.freedesktop.org/~airlied/linux:
drm/mst: Avoid processing partially received up/down message transactions
drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()
drm/mst: Fix error handling during MST sideband message reception
drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure
drm/imx: fix typo in ipu_plane_formats[]
drm/vc4: Fix VBLANK handling in crtc->enable() path
dma-buf/fence: Avoid use of uninitialised timestamp
drm/amdgpu: Remove unused field kgd2kfd_shared_resources.num_mec
drm/radeon: Remove initialization of shared_resources.num_mec
drm/amdkfd: Remove unused references to shared_resources.num_mec
drm/amdgpu: Fix KFD oversubscription by tracking queues correctly
Pull timer fix from Ingo Molnar:
"A timer_irq_init() clocksource API robustness fix"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource/drivers/timer-of: Handle of_irq_get_byname() result correctly
Pull irq fixes from Ingo Molnar:
"A resume_irq() fix, plus a number of static declaration fixes"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/digicolor: Drop unnecessary static
irqchip/mips-cpu: Drop unnecessary static
irqchip/gic/realview: Drop unnecessary static
irqchip/mips-gic: Remove population of irq domain names
genirq/PM: Properly pretend disabled state when force resuming interrupts
imx-drm: fix parallel display regression and typo in plane format list
- Fix a regression where the parallel-display driver would not probe
anymore if no panel is specified in the device tree, since the
introduction of drm_of_find_panel_or_bridge.
- Fix a typo in the plane format list: replace a duplicate BGRA8888 format
with BGRX8888, as originally intended.
* tag 'imx-drm-fixes-2017-07-18' of git://git.pengutronix.de/git/pza/linux:
drm/imx: parallel-display: Accept drm_of_find_panel_or_bridge failure
drm/imx: fix typo in ipu_plane_formats[]
Core Changes:
- fence: Introduce new fence flag to signify timestamp is populated (Chris)
- mst: Avoid processing incomplete data + fix NULL dereference (Imre)
Driver Changes:
- vc4: Avoid WARN from grabbing a ref from vblank that's not on (Boris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Imre Deak <imre.deak@intel.com>
* tag 'drm-misc-fixes-2017-07-20' of git://anongit.freedesktop.org/git/drm-misc:
drm/mst: Avoid processing partially received up/down message transactions
drm/mst: Avoid dereferencing a NULL mstb in drm_dp_mst_handle_up_req()
drm/mst: Fix error handling during MST sideband message reception
drm/vc4: Fix VBLANK handling in crtc->enable() path
dma-buf/fence: Avoid use of uninitialised timestamp
gcc-7 warns about the result of a constant multiplication used as
a boolean:
drivers/ide/ide-timings.c: In function 'ide_timing_quantize':
drivers/ide/ide-timings.c:112:24: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
q->setup = EZ(t->setup * 1000, T);
This slightly rearranges the macro to simplify the code and avoid
the warning at the same time.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) BPF verifier signed/unsigned value tracking fix, from Daniel
Borkmann, Edward Cree, and Josef Bacik.
2) Fix memory allocation length when setting up calls to
->ndo_set_mac_address, from Cong Wang.
3) Add a new cxgb4 device ID, from Ganesh Goudar.
4) Fix FIB refcount handling, we have to set it's initial value before
the configure callback (which can bump it). From David Ahern.
5) Fix double-free in qcom/emac driver, from Timur Tabi.
6) A bunch of gcc-7 string format overflow warning fixes from Arnd
Bergmann.
7) Fix link level headroom tests in ip_do_fragment(), from Vasily
Averin.
8) Fix chunk walking in SCTP when iterating over error and parameter
headers. From Alexander Potapenko.
9) TCP BBR congestion control fixes from Neal Cardwell.
10) Fix SKB fragment handling in bcmgenet driver, from Doug Berger.
11) BPF_CGROUP_RUN_PROG_SOCK_OPS needs to check for null __sk, from Cong
Wang.
12) xmit_recursion in ppp driver needs to be per-device not per-cpu,
from Gao Feng.
13) Cannot release skb->dst in UDP if IP options processing needs it.
From Paolo Abeni.
14) Some netdev ioctl ifr_name[] NULL termination fixes. From Alexander
Levin and myself.
15) Revert some rtnetlink notification changes that are causing
regressions, from David Ahern.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits)
net: bonding: Fix transmit load balancing in balance-alb mode
rds: Make sure updates to cp_send_gen can be observed
net: ethernet: ti: cpsw: Push the request_irq function to the end of probe
ipv4: initialize fib_trie prior to register_netdev_notifier call.
rtnetlink: allocate more memory for dev_set_mac_address()
net: dsa: b53: Add missing ARL entries for BCM53125
bpf: more tests for mixed signed and unsigned bounds checks
bpf: add test for mixed signed and unsigned bounds checks
bpf: fix up test cases with mixed signed/unsigned bounds
bpf: allow to specify log level and reduce it for test_verifier
bpf: fix mixed signed/unsigned derived min/max value bounds
ipv6: avoid overflow of offset in ip6_find_1stfragopt
net: tehuti: don't process data if it has not been copied from userspace
Revert "rtnetlink: Do not generate notifications for CHANGEADDR event"
net: dsa: mv88e6xxx: Enable CMODE config support for 6390X
dt-binding: ptp: Add SoC compatibility strings for dte ptp clock
NET: dwmac: Make dwmac reset unconditional
net: Zero terminate ifr_name in dev_ifname().
wireless: wext: terminate ifr name coming from userspace
netfilter: fix netfilter_net_init() return
...
balance-alb mode used to have transmit dynamic load balancing feature
enabled by default. However, transmit dynamic load balancing no longer
works in balance-alb after commit 8b426dc54c ("bonding: remove
hardcoded value").
Both balance-tlb and balance-alb use the function bond_do_alb_xmit() to
send packets. This function uses the parameter tlb_dynamic_lb.
tlb_dynamic_lb used to have the default value of 1 for balance-alb, but
now the value is set to 0 except in balance-tlb.
Re-enable transmit dyanmic load balancing by initializing tlb_dynamic_lb
for balance-alb similar to balance-tlb.
Fixes: 8b426dc54c ("bonding: remove hardcoded value")
Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com>
Acked-by: Andy Gospodarek <andy@greyhouse.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Push the request_irq function to the end of probe so as
to ensure all the required fields are populated in the event
of an ISR getting executed right after requesting the irq.
Currently while loading the crash kernel a crash was seen as
soon as devm_request_threaded_irq was called. This was due to
n->poll being NULL which is called as part of net_rx_action
function.
Suggested-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The BCM53125 entry was missing an arl_entries member which would
basically prevent the ARL search from terminating properly. This switch
has 4 ARL entries, so add that.
Fixes: 1da6df85c6 ("net: dsa: b53: Implement ARL add/del/dump operations")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull power management fixes from Rafael Wysocki:
"These are two stable-candidate fixes for the intel_pstate driver and
the generic power domains (genpd) framework.
Specifics:
- Fix the average CPU load computations in the intel_pstate driver on
Knights Landing (Xeon Phi) processors that require an extra factor
to compensate for a rate change differences between the TSC and
MPERF which is missing (Srinivas Pandruvada).
- Fix an initialization ordering issue in the generic power domains
(genpd) framework (Sudeep Holla)"
* tag 'pm-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / Domains: defer dev_pm_domain_set() until genpd->attach_dev succeeds if present
cpufreq: intel_pstate: Correct the busy calculation for KNL
Pull libnvdimm fixes from Dan Williams:
"A handful of small fixes for 4.13-rc2. Three of these fixes are tagged
for -stable. They have all appeared in at least one -next release with
no reported issues
- Fix handling of media errors that span a sector
- Fix support of multiple namespaces in a libnvdimm region being in
device-dax mode
- Clean up the machine check notifier properly when the nfit driver
fails to register
- Address a static analysis (smatch) report in device-dax"
* tag 'libnvdimm-fixes-4.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
device-dax: fix sysfs duplicate warnings
MAINTAINERS: list drivers/acpi/nfit/ files for libnvdimm sub-system
acpi/nfit: Fix memory corruption/Unregister mce decoder on failure
device-dax: fix 'passing zero to ERR_PTR()' warning
libnvdimm: fix badblock range handling of ARS range
Pull HID fixes from Jiri Kosina:
- HID multitouch 4.12 regression fix from Dmitry Torokhov
- error handling fix for HID++ driver from Gustavo A. R. Silva
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: hid-logitech-hidpp: add NULL check on devm_kmemdup() return value
HID: multitouch: do not blindly set EV_KEY or EV_ABS bits
The port number is only valid if IB_QP_PORT is set in the mask.
So only check port number if it is valid to prevent modify_qp from
failing due to an invalid port number.
Fixes: 5ecce4c9b17b("Check port number supplied by user verbs cmds")
Cc: <stable@vger.kernel.org> # v2.6.14+
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Tested-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We might get some bogus error completions in case the target will
remotely invalidate the rkey and the HCA will need to retransmit
from this buffer.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Wrap ib_copy_to_udata with a function that ensures that the data
being copied over to user space isn't longer than the allowed.
Fixes: cecbcddf64 ("qedr: Add support for QP verbs")
Fixes: a7efd7773e ("qedr: Add support for PD,PKEY and CQ verbs")
Fixes: ac1b36e55a ("qedr: Add support for user context verbs")
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Only use the read sge lkey/addr and the remote rkey/addr if the
length of the read is not zero. Otherwise the read response might
be treated as the RTR read response and not delivered to the
application. Or worse Terminator hardware will fail a 0B read
if the STAG is 0 even if the read length is 0.
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
CM REQs cannot be successfully retried, because a new pv_cm_id is
created for each request, without checking if one already exists.
By checking if an id exists before creating one, the bug is fixed.
This bug can be provoked by running an RDMA CM user-land application,
but inserting a five seconds delay before the rdma_accept() call on
the passive side. This delay is larger than the default CMA timeout,
and triggers a retry from the active side. The retried REQ will use
another pv_cm_id (the cm_id on the wire). This confuses the CM
protocol and two REJs are sent from the passive side.
Here is an excerpt from ibdump running without the patch:
3.285092 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello)
7.382711 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello)
7.382861 LID: 4 -> LID: 4 InfiniBand 290 CM: ConnectReject
7.387644 LID: 4 -> LID: 4 InfiniBand 290 CM: ConnectReject
and here is the same with bug fix applied:
3.251010 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello)
7.349387 LID: 4 -> LID: 4 SDP 290 CM: ConnectRequest(SDP Hello)
8.258443 LID: 4 -> LID: 4 SDP 290 CM: ConnectReply(SDP Hello)
8.259890 LID: 4 -> LID: 4 InfiniBand 290 CM: ReadyToUse
Suggested-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reported-by: Wei Lin Guay <wei.lin.guay@oracle.com>
Tested-by: Wei Lin Guay <wei.lin.guay@oracle.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Acked-by: Jack Morgenstein <jackm@dev.mellanox.co.il>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current computation of qp->timeout_jiffies in rvt_modify_qp() will cause
overflow due to the fact that the input to the function usecs_to_jiffies
is only 32-bit ( unsigned int). Overflow will occur when attr->timeout is
equal to or greater than 30. The consequence is unnecessarily excessive
retry and thus degradation of the system performance.
This patch fixes the problem by limiting the input to 5-bit and calling
usecs_to_jiffies() before multiplying the scaling factor.
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Kaike Wan <kaike.wan@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Local ack delay exposed by the driver is 0 which means infinite QP
timeout. Reporting the default value to 16 (approx 260ms)
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
While invoking the req_notify_cq hook, ULPs can request
whether the CQs have any CQEs pending. If CQEs are pending,
drivers can indicate it by returning 1 for req_notify_cq.
The stack will poll CQ again till CQ is empty.
This patch peeks the CQ for any valid entries and return accordingly.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Driver shall check if the host system bios has enabled
Atomic operations capability in PCI Device Control 2
register of the pci-device. Expose the ATOMIC_HCA
flag only if the Atomic operations capability is set.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Starting FW version 20.6.47, firmware is keeping separate statistics
for L2 and RDMA. However, driver needs to specify RDMA or not when
allocating stat_ctx.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
There's a couple of bugs in the support of max_rd_atomic and
max_dest_rd_atomic. In the modify_qp, if the requested max_rd_atomic,
which is the ORRQ size, is greater than what the chip can support,
then we have to cap the request to chip max as we can't have the HW
overflow the ORRQ. Capping the max_rd_atomic support internally is okay
to do as the remaining read/atomic WRs will still be sitting in the SQ.
However, for the max_dest_rd_atomic, the driver has to error out as
this dictates the IRRQ size and we can't control what the remote
side sends.
Signed-off-by: Eddie Wai <eddie.wai@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
- Report supported value for max_mr_size to IB stack in query_device.
Also, check and log if MR size requested by application in
reg_user_mr() is greater than value currently supported by driver.
- Report only 4K page size support for now
- Fix Max_QP value returned by ibv_devinfo -vv.
In case of PF, FW reserves 129 QPs for creating QP1s of VFs
and PF. So the max_qp value reported by FW for PF doesn'tt include
the QP1. Fixing this issue by adding 1 with the value reported
by FW.
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This fix is added only to avoid system crash in some a
specific scenario. When bnxt_re driver is loaded and if
user tries to change interface mac address, delete GID
fails because QP1 is still associated with existing MAC
(default GID). If the above command fails GID tables are
not modified in the h/w or driver, but the GID context memory
is freed. Now, if the user changes the mac back to the original
value, another add_gid comes to the driver where the driver
reports that the GID is already present in its table
and tries to access the context which was already freed.
So, in this case, in order to avoid NULL pointer de-reference,
this patch removes the context memory free if delete_gid fails
and the same context memory is re-used in new add_gid.
Memory cleanup will be taken care during driver unload, while
deleting the GID table.
Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Posting WQE size of 2 results in a WQE_FORMAT_ERROR
thrown by the HW as it requires host to supply WQE Size with room
for atleast one SGE so that the resulting WQE size be atleast 3.
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
The driver must free the DPI during the dealloc_ucontext
instead of freeing it during dealloc_pd. However, the DPI
allocation scheme remains unchanged.
Signed-off-by: Devesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If either of these allocations fail then we return ERR_PTR(0). That's
equivalent to NULL and results in a NULL pointer dereference in the
caller.
Fixes: fe2caefcdf ("RDMA/ocrdma: Add driver for Emulex OneConnect IBoE RDMA adapter")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We should preserve the original "status" error code instead of resetting
it to zero. Returning ERR_PTR(0) is the same as NULL and results in a
NULL dereference in the callers. I added a printk() on error instead.
Fixes: 45e86b33ec ("RDMA/ocrdma: Cache recv DB until QP moved to RTR")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
We accidentally don't set the error code on some error paths. It means
return ERR_PTR(0) which is NULL and results in a NULL dereference in the
caller.
Fixes: 13a239330a ("RDMA/cxgb3: Don't ignore insert_handle() failures")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
If one of these kmalloc() calls fails then we return ERR_PTR(0) which is
NULL. It results in a NULL dereference in the callers.
Fixes: cfdda9d764 ("RDMA/cxgb4: Add driver for Chelsio T4 RNIC")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
