The generic_map_lookup_batch currently returns EINTR if it fails with
ENOENT and retries several times on bpf_map_copy_value. The next batch
would start from the same location, presuming it's a transient issue.
This is incorrect if a map can actually have "holes", i.e.
"get_next_key" can return a key that does not point to a valid value. At
least the array of maps type may contain such holes legitly. Right now
these holes show up, generic batch lookup cannot proceed any more. It
will always fail with EINTR errors.
Rather, do not retry in generic_map_lookup_batch. If it finds a non
existing element, skip to the next key. This simple solution comes with
a price that transient errors may not be recovered, and the iteration
might cycle back to the first key under parallel deletion. For example,
Hou Tao <houtao@huaweicloud.com> pointed out a following scenario:
For LPM trie map:
(1) ->map_get_next_key(map, prev_key, key) returns a valid key
(2) bpf_map_copy_value() return -ENOMENT
It means the key must be deleted concurrently.
(3) goto next_key
It swaps the prev_key and key
(4) ->map_get_next_key(map, prev_key, key) again
prev_key points to a non-existing key, for LPM trie it will treat just
like prev_key=NULL case, the returned key will be duplicated.
With the retry logic, the iteration can continue to the key next to the
deleted one. But if we directly skip to the next key, the iteration loop
would restart from the first key for the lpm_trie type.
However, not all races may be recovered. For example, if current key is
deleted after instead of before bpf_map_copy_value, or if the prev_key
also gets deleted, then the loop will still restart from the first key
for lpm_tire anyway. For generic lookup it might be better to stay
simple, i.e. just skip to the next key. To guarantee that the output
keys are not duplicated, it is better to implement map type specific
batch operations, which can properly lock the trie and synchronize with
concurrent mutators.
Fixes: cb4d03ab49 ("bpf: Add generic support for lookup batch op")
Closes: https://lore.kernel.org/bpf/Z6JXtA1M5jAZx8xD@debian.debian/
Signed-off-by: Yan Zhai <yan@cloudflare.com>
Acked-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/85618439eea75930630685c467ccefeac0942e2b.1739171594.git.yan@cloudflare.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Refactor get_constant_map_key() to disambiguate the constant key
value from potential error values. In the case that the key is
negative, it could be confused for an error.
It's not currently an issue, as the verifier seems to track s32 spills
as u32. So even if the program wrongly uses a negative value for an
arraymap key, the verifier just thinks it's an impossibly high value
which gets correctly discarded.
Refactor anyways to make things cleaner and prevent potential future
issues.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/dfe144259ae7cfc98aa63e1b388a14869a10632a.1738689872.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Previously, we were trying to extract constant map keys for all
bpf_map_lookup_elem(), regardless of map type. This is an issue if the
map has a u64 key and the value is very high, as it can be interpreted
as a negative signed value. This in turn is treated as an error value by
check_func_arg() which causes a valid program to be incorrectly
rejected.
Fix by only extracting constant map keys for relevant maps. This fix
works because nullness elision is only allowed for {PERCPU_}ARRAY maps,
and keys for these are within u32 range. See next commit for an example
via selftest.
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reported-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Signed-off-by: Daniel Xu <dxu@dxuuu.xyz>
Link: https://lore.kernel.org/r/aa868b642b026ff87ba6105ea151bc8693b35932.1738689872.git.dxu@dxuuu.xyz
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
On an aarch64 kernel with CONFIG_PAGE_SIZE_64KB=y,
arena_htab tests cause a segmentation fault and soft lockup.
The same failure is not observed with 4k pages on aarch64.
It turns out arena_map_free() is calling
apply_to_existing_page_range() with the address returned by
bpf_arena_get_kern_vm_start(). If this address is not page-aligned
the code ends up calling apply_to_pte_range() with that unaligned
address causing soft lockup.
Fix it by round up GUARD_SZ to PAGE_SIZE << 1 so that the
division by 2 in bpf_arena_get_kern_vm_start() returns
a page-aligned value.
Fixes: 317460317a ("bpf: Introduce bpf_arena.")
Reported-by: Colm Harrington <colm.harrington@oracle.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250205170059.427458-1-alan.maguire@oracle.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The following commit
bc235cdb42 ("bpf: Prevent deadlock from recursive bpf_task_storage_[get|delete]")
first introduced deadlock prevention for fentry/fexit programs attaching
on bpf_task_storage helpers. That commit also employed the logic in map
free path in its v6 version.
Later bpf_cgrp_storage was first introduced in
c4bcfb38a9 ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
which faces the same issue as bpf_task_storage, instead of its busy
counter, NULL was passed to bpf_local_storage_map_free() which opened
a window to cause deadlock:
<TASK>
(acquiring local_storage->lock)
_raw_spin_lock_irqsave+0x3d/0x50
bpf_local_storage_update+0xd1/0x460
bpf_cgrp_storage_get+0x109/0x130
bpf_prog_a4d4a370ba857314_cgrp_ptr+0x139/0x170
? __bpf_prog_enter_recur+0x16/0x80
bpf_trampoline_6442485186+0x43/0xa4
cgroup_storage_ptr+0x9/0x20
(holding local_storage->lock)
bpf_selem_unlink_storage_nolock.constprop.0+0x135/0x160
bpf_selem_unlink_storage+0x6f/0x110
bpf_local_storage_map_free+0xa2/0x110
bpf_map_free_deferred+0x5b/0x90
process_one_work+0x17c/0x390
worker_thread+0x251/0x360
kthread+0xd2/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Progs:
- A: SEC("fentry/cgroup_storage_ptr")
- cgid (BPF_MAP_TYPE_HASH)
Record the id of the cgroup the current task belonging
to in this hash map, using the address of the cgroup
as the map key.
- cgrpa (BPF_MAP_TYPE_CGRP_STORAGE)
If current task is a kworker, lookup the above hash
map using function parameter @owner as the key to get
its corresponding cgroup id which is then used to get
a trusted pointer to the cgroup through
bpf_cgroup_from_id(). This trusted pointer can then
be passed to bpf_cgrp_storage_get() to finally trigger
the deadlock issue.
- B: SEC("tp_btf/sys_enter")
- cgrpb (BPF_MAP_TYPE_CGRP_STORAGE)
The only purpose of this prog is to fill Prog A's
hash map by calling bpf_cgrp_storage_get() for as
many userspace tasks as possible.
Steps to reproduce:
- Run A;
- while (true) { Run B; Destroy B; }
Fix this issue by passing its busy counter to the free procedure so
it can be properly incremented before storage/smap locking.
Fixes: c4bcfb38a9 ("bpf: Implement cgroup storage available to non-cgroup-attached bpf progs")
Signed-off-by: Abel Wu <wuyun.abel@bytedance.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20241221061018.37717-1-wuyun.abel@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
We use map->freeze_mutex to prevent races between map_freeze() and
memory mapping BPF map contents with writable permissions. The way we
naively do this means we'll hold freeze_mutex for entire duration of all
the mm and VMA manipulations, which is completely unnecessary. This can
potentially also lead to deadlocks, as reported by syzbot in [0].
So, instead, hold freeze_mutex only during writeability checks, bump
(proactively) "write active" count for the map, unlock the mutex and
proceed with mmap logic. And only if something went wrong during mmap
logic, then undo that "write active" counter increment.
[0] https://lore.kernel.org/bpf/678dcbc9.050a0220.303755.0066.GAE@google.com/
Fixes: fc9702273e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY")
Reported-by: syzbot+4dc041c686b7c816a71e@syzkaller.appspotmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
For all BPF maps we ensure that VM_MAYWRITE is cleared when
memory-mapping BPF map contents as initially read-only VMA. This is
because in some cases BPF verifier relies on the underlying data to not
be modified afterwards by user space, so once something is mapped
read-only, it shouldn't be re-mmap'ed as read-write.
As such, it's not necessary to check VM_MAYWRITE in bpf_map_mmap() and
map->ops->map_mmap() callbacks: VM_WRITE should be consistently set for
read-write mappings, and if VM_WRITE is not set, there is no way for
user space to upgrade read-only mapping to read-write one.
This patch cleans up this VM_WRITE vs VM_MAYWRITE handling within
bpf_map_mmap(), which is an entry point for any BPF map mmap()-ing
logic. We also drop unnecessary sanitization of VM_MAYWRITE in BPF
ringbuf's map_mmap() callback implementation, as it is already performed
by common code in bpf_map_mmap().
Note, though, that in bpf_map_mmap_{open,close}() callbacks we can't
drop VM_MAYWRITE use, because it's possible (and is outside of
subsystem's control) to have initially read-write memory mapping, which
is subsequently dropped to read-only by user space through mprotect().
In such case, from BPF verifier POV it's read-write data throughout the
lifetime of BPF map, and is counted as "active writer".
But its VMAs will start out as VM_WRITE|VM_MAYWRITE, then mprotect() can
change it to just VM_MAYWRITE (and no VM_WRITE), so when its finally
munmap()'ed and bpf_map_mmap_close() is called, vm_flags will be just
VM_MAYWRITE, but we still need to decrement active writer count with
bpf_map_write_active_dec() as it's still considered to be a read-write
mapping by the rest of BPF subsystem.
Similar reasoning applies to bpf_map_mmap_open(), which is called
whenever mmap(), munmap(), and/or mprotect() forces mm subsystem to
split original VMA into multiple discontiguous VMAs.
Memory-mapping handling is a bit tricky, yes.
Cc: Jann Horn <jannh@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20250129012246.1515826-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull driver core and debugfs updates from Greg KH:
"Here is the big set of driver core and debugfs updates for 6.14-rc1.
Included in here is a bunch of driver core, PCI, OF, and platform rust
bindings (all acked by the different subsystem maintainers), hence the
merge conflict with the rust tree, and some driver core api updates to
mark things as const, which will also require some fixups due to new
stuff coming in through other trees in this merge window.
There are also a bunch of debugfs updates from Al, and there is at
least one user that does have a regression with these, but Al is
working on tracking down the fix for it. In my use (and everyone
else's linux-next use), it does not seem like a big issue at the
moment.
Here's a short list of the things in here:
- driver core rust bindings for PCI, platform, OF, and some i/o
functions.
We are almost at the "write a real driver in rust" stage now,
depending on what you want to do.
- misc device rust bindings and a sample driver to show how to use
them
- debugfs cleanups in the fs as well as the users of the fs api for
places where drivers got it wrong or were unnecessarily doing
things in complex ways.
- driver core const work, making more of the api take const * for
different parameters to make the rust bindings easier overall.
- other small fixes and updates
All of these have been in linux-next with all of the aforementioned
merge conflicts, and the one debugfs issue, which looks to be resolved
"soon""
* tag 'driver-core-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (95 commits)
rust: device: Use as_char_ptr() to avoid explicit cast
rust: device: Replace CString with CStr in property_present()
devcoredump: Constify 'struct bin_attribute'
devcoredump: Define 'struct bin_attribute' through macro
rust: device: Add property_present()
saner replacement for debugfs_rename()
orangefs-debugfs: don't mess with ->d_name
octeontx2: don't mess with ->d_parent or ->d_parent->d_name
arm_scmi: don't mess with ->d_parent->d_name
slub: don't mess with ->d_name
sof-client-ipc-flood-test: don't mess with ->d_name
qat: don't mess with ->d_name
xhci: don't mess with ->d_iname
mtu3: don't mess wiht ->d_iname
greybus/camera - stop messing with ->d_iname
mediatek: stop messing with ->d_iname
netdevsim: don't embed file_operations into your structs
b43legacy: make use of debugfs_get_aux()
b43: stop embedding struct file_operations into their objects
carl9170: stop embedding file_operations into their objects
...
Pull stop_machine update from Paul McKenney:
"Move a misplaced call to rcu_momentary_eqs() from multi_cpu_stop() to
ensure that interrupts are disabled as required"
* tag 'stop-machine.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
stop_machine: Fix rcu_momentary_eqs() call in multi_cpu_stop()
Pull CSD-lock update from Paul McKenney:
"Allow runtime modification of the csd_lock_timeout and
panic_on_ipistall module parameters"
* tag 'csd-lock.2025.01.28a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
locking/csd-lock: make CSD lock debug tunables writable in /sys
Pull MM updates from Andrew Morton:
"The various patchsets are summarized below. Plus of course many
indivudual patches which are described in their changelogs.
- "Allocate and free frozen pages" from Matthew Wilcox reorganizes
the page allocator so we end up with the ability to allocate and
free zero-refcount pages. So that callers (ie, slab) can avoid a
refcount inc & dec
- "Support large folios for tmpfs" from Baolin Wang teaches tmpfs to
use large folios other than PMD-sized ones
- "Fix mm/rodata_test" from Petr Tesarik performs some maintenance
and fixes for this small built-in kernel selftest
- "mas_anode_descend() related cleanup" from Wei Yang tidies up part
of the mapletree code
- "mm: fix format issues and param types" from Keren Sun implements a
few minor code cleanups
- "simplify split calculation" from Wei Yang provides a few fixes and
a test for the mapletree code
- "mm/vma: make more mmap logic userland testable" from Lorenzo
Stoakes continues the work of moving vma-related code into the
(relatively) new mm/vma.c
- "mm/page_alloc: gfp flags cleanups for alloc_contig_*()" from David
Hildenbrand cleans up and rationalizes handling of gfp flags in the
page allocator
- "readahead: Reintroduce fix for improper RA window sizing" from Jan
Kara is a second attempt at fixing a readahead window sizing issue.
It should reduce the amount of unnecessary reading
- "synchronously scan and reclaim empty user PTE pages" from Qi Zheng
addresses an issue where "huge" amounts of pte pagetables are
accumulated:
https://lore.kernel.org/lkml/cover.1718267194.git.zhengqi.arch@bytedance.com/
Qi's series addresses this windup by synchronously freeing PTE
memory within the context of madvise(MADV_DONTNEED)
- "selftest/mm: Remove warnings found by adding compiler flags" from
Muhammad Usama Anjum fixes some build warnings in the selftests
code when optional compiler warnings are enabled
- "mm: don't use __GFP_HARDWALL when migrating remote pages" from
David Hildenbrand tightens the allocator's observance of
__GFP_HARDWALL
- "pkeys kselftests improvements" from Kevin Brodsky implements
various fixes and cleanups in the MM selftests code, mainly
pertaining to the pkeys tests
- "mm/damon: add sample modules" from SeongJae Park enhances DAMON to
estimate application working set size
- "memcg/hugetlb: Rework memcg hugetlb charging" from Joshua Hahn
provides some cleanups to memcg's hugetlb charging logic
- "mm/swap_cgroup: remove global swap cgroup lock" from Kairui Song
removes the global swap cgroup lock. A speedup of 10% for a
tmpfs-based kernel build was demonstrated
- "zram: split page type read/write handling" from Sergey Senozhatsky
has several fixes and cleaups for zram in the area of
zram_write_page(). A watchdog softlockup warning was eliminated
- "move pagetable_*_dtor() to __tlb_remove_table()" from Kevin
Brodsky cleans up the pagetable destructor implementations. A rare
use-after-free race is fixed
- "mm/debug: introduce and use VM_WARN_ON_VMG()" from Lorenzo Stoakes
simplifies and cleans up the debugging code in the VMA merging
logic
- "Account page tables at all levels" from Kevin Brodsky cleans up
and regularizes the pagetable ctor/dtor handling. This results in
improvements in accounting accuracy
- "mm/damon: replace most damon_callback usages in sysfs with new
core functions" from SeongJae Park cleans up and generalizes
DAMON's sysfs file interface logic
- "mm/damon: enable page level properties based monitoring" from
SeongJae Park increases the amount of information which is
presented in response to DAMOS actions
- "mm/damon: remove DAMON debugfs interface" from SeongJae Park
removes DAMON's long-deprecated debugfs interfaces. Thus the
migration to sysfs is completed
- "mm/hugetlb: Refactor hugetlb allocation resv accounting" from
Peter Xu cleans up and generalizes the hugetlb reservation
accounting
- "mm: alloc_pages_bulk: small API refactor" from Luiz Capitulino
removes a never-used feature of the alloc_pages_bulk() interface
- "mm/damon: extend DAMOS filters for inclusion" from SeongJae Park
extends DAMOS filters to support not only exclusion (rejecting),
but also inclusion (allowing) behavior
- "Add zpdesc memory descriptor for zswap.zpool" from Alex Shi
introduces a new memory descriptor for zswap.zpool that currently
overlaps with struct page for now. This is part of the effort to
reduce the size of struct page and to enable dynamic allocation of
memory descriptors
- "mm, swap: rework of swap allocator locks" from Kairui Song redoes
and simplifies the swap allocator locking. A speedup of 400% was
demonstrated for one workload. As was a 35% reduction for kernel
build time with swap-on-zram
- "mm: update mips to use do_mmap(), make mmap_region() internal"
from Lorenzo Stoakes reworks MIPS's use of mmap_region() so that
mmap_region() can be made MM-internal
- "mm/mglru: performance optimizations" from Yu Zhao fixes a few
MGLRU regressions and otherwise improves MGLRU performance
- "Docs/mm/damon: add tuning guide and misc updates" from SeongJae
Park updates DAMON documentation
- "Cleanup for memfd_create()" from Isaac Manjarres does that thing
- "mm: hugetlb+THP folio and migration cleanups" from David
Hildenbrand provides various cleanups in the areas of hugetlb
folios, THP folios and migration
- "Uncached buffered IO" from Jens Axboe implements the new
RWF_DONTCACHE flag which provides synchronous dropbehind for
pagecache reading and writing. To permite userspace to address
issues with massive buildup of useless pagecache when
reading/writing fast devices
- "selftests/mm: virtual_address_range: Reduce memory" from Thomas
Weißschuh fixes and optimizes some of the MM selftests"
* tag 'mm-stable-2025-01-26-14-59' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm/compaction: fix UBSAN shift-out-of-bounds warning
s390/mm: add missing ctor/dtor on page table upgrade
kasan: sw_tags: use str_on_off() helper in kasan_init_sw_tags()
tools: add VM_WARN_ON_VMG definition
mm/damon/core: use str_high_low() helper in damos_wmark_wait_us()
seqlock: add missing parameter documentation for raw_seqcount_try_begin()
mm/page-writeback: consolidate wb_thresh bumping logic into __wb_calc_thresh
mm/page_alloc: remove the incorrect and misleading comment
zram: remove zcomp_stream_put() from write_incompressible_page()
mm: separate move/undo parts from migrate_pages_batch()
mm/kfence: use str_write_read() helper in get_access_type()
selftests/mm/mkdirty: fix memory leak in test_uffdio_copy()
kasan: hw_tags: Use str_on_off() helper in kasan_init_hw_tags()
selftests/mm: virtual_address_range: avoid reading from VM_IO mappings
selftests/mm: vm_util: split up /proc/self/smaps parsing
selftests/mm: virtual_address_range: unmap chunks after validation
selftests/mm: virtual_address_range: mmap() without PROT_WRITE
selftests/memfd/memfd_test: fix possible NULL pointer dereference
mm: add FGP_DONTCACHE folio creation flag
mm: call filemap_fdatawrite_range_kick() after IOCB_DONTCACHE issue
...
Pull non-MM updates from Andrew Morton:
"Mainly individually changelogged singleton patches. The patch series
in this pull are:
- "lib min_heap: Improve min_heap safety, testing, and documentation"
from Kuan-Wei Chiu provides various tightenings to the min_heap
library code
- "xarray: extract __xa_cmpxchg_raw" from Tamir Duberstein preforms
some cleanup and Rust preparation in the xarray library code
- "Update reference to include/asm-<arch>" from Geert Uytterhoeven
fixes pathnames in some code comments
- "Converge on using secs_to_jiffies()" from Easwar Hariharan uses
the new secs_to_jiffies() in various places where that is
appropriate
- "ocfs2, dlmfs: convert to the new mount API" from Eric Sandeen
switches two filesystems to the new mount API
- "Convert ocfs2 to use folios" from Matthew Wilcox does that
- "Remove get_task_comm() and print task comm directly" from Yafang
Shao removes now-unneeded calls to get_task_comm() in various
places
- "squashfs: reduce memory usage and update docs" from Phillip
Lougher implements some memory savings in squashfs and performs
some maintainability work
- "lib: clarify comparison function requirements" from Kuan-Wei Chiu
tightens the sort code's behaviour and adds some maintenance work
- "nilfs2: protect busy buffer heads from being force-cleared" from
Ryusuke Konishi fixes an issues in nlifs when the fs is presented
with a corrupted image
- "nilfs2: fix kernel-doc comments for function return values" from
Ryusuke Konishi fixes some nilfs kerneldoc
- "nilfs2: fix issues with rename operations" from Ryusuke Konishi
addresses some nilfs BUG_ONs which syzbot was able to trigger
- "minmax.h: Cleanups and minor optimisations" from David Laight does
some maintenance work on the min/max library code
- "Fixes and cleanups to xarray" from Kemeng Shi does maintenance
work on the xarray library code"
* tag 'mm-nonmm-stable-2025-01-24-23-16' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (131 commits)
ocfs2: use str_yes_no() and str_no_yes() helper functions
include/linux/lz4.h: add some missing macros
Xarray: use xa_mark_t in xas_squash_marks() to keep code consistent
Xarray: remove repeat check in xas_squash_marks()
Xarray: distinguish large entries correctly in xas_split_alloc()
Xarray: move forward index correctly in xas_pause()
Xarray: do not return sibling entries from xas_find_marked()
ipc/util.c: complete the kernel-doc function descriptions
gcov: clang: use correct function param names
latencytop: use correct kernel-doc format for func params
minmax.h: remove some #defines that are only expanded once
minmax.h: simplify the variants of clamp()
minmax.h: move all the clamp() definitions after the min/max() ones
minmax.h: use BUILD_BUG_ON_MSG() for the lo < hi test in clamp()
minmax.h: reduce the #define expansion of min(), max() and clamp()
minmax.h: update some comments
minmax.h: add whitespace around operators and after commas
nilfs2: do not update mtime of renamed directory that is not moved
nilfs2: handle errors that nilfs_prepare_chunk() may return
CREDITS: fix spelling mistake
...
Pull modules updates from Petr Pavlu:
- Sign modules with sha512 instead of sha1 by default
- Don't fail module loading when failing to set the
ro_after_init section read-only
- Constify 'struct module_attribute'
- Cleanups and preparation for const struct bin_attribute
- Put known GPL offenders in an array
- Extend the preempt disabled section in
dereference_symbol_descriptor()
* tag 'modules-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux:
module: sign with sha512 instead of sha1 by default
module: Don't fail module loading when setting ro_after_init section RO failed
module: Split module_enable_rodata_ro()
module: sysfs: Use const 'struct bin_attribute'
module: sysfs: Add notes attributes through attribute_group
module: sysfs: Simplify section attribute allocation
module: sysfs: Drop 'struct module_sect_attr'
module: sysfs: Drop member 'module_sect_attr::address'
module: sysfs: Drop member 'module_sect_attrs::nsections'
module: Constify 'struct module_attribute'
module: Handle 'struct module_version_attribute' as const
params: Prepare for 'const struct module_attribute *'
module: Put known GPL offenders in an array
module: Extend the preempt disabled section in dereference_symbol_descriptor().
Pull rv and tools/rtla updates from Steven Rostedt:
- Add a test suite to test the tool
Add a small test suite that can be used to test rtla's basic features
to at least have something to test when applying changes.
- Automate manual steps in monitor creation
While creating a new monitor in RV, besides generating code from
dot2k, there are a few manual steps which can be tedious and error
prone, like adding the tracepoints, makefile lines and kconfig, or
selecting events that start the monitor in the initial state.
Updates were made to try and automate as much as possible among those
steps to make creating a new RV monitor much quicker. It is still
requires to select proper tracepoints, this step is harder to
automate in a general way and, in several cases, would still need
user intervention.
- Have rtla timerlat hist and top set OSNOISE_WORKLOAD flag
Have both rtla-timerlat-hist and rtla-timerlat-top set
OSNOISE_WORKLOAD to the proper value ("on" when running with -k,
"off" when running with -u) every time the option is available
instead of setting it only when running with -u.
This prevents rtla timerlat -k from giving no results when
NO_OSNOISE_WORKLOAD is set, either manually or by an abnormally
exited earlier run of rtla timerlat -u.
- Stop rtla timerlat on signal properly when overloaded
There is an issue where if rtla is run on machines with a high number
of CPUs (100+), timerlat can generate more samples than rtla is able
to process via tracefs_iterate_raw_events. This is especially common
when the interval is set to 100us (rteval and cyclictest default) as
opposed to the rtla default of 1000us, but also happens with the rtla
default.
Currently, this leads to rtla hanging and having to be terminated
with SIGTERM. SIGINT setting stop_tracing is not enough, since more
and more events are coming and tracefs_iterate_raw_events never
exits.
To fix this: Stop the timerlat tracer on SIGINT/SIGALRM to ensure no
more events are generated when rtla is supposed to exit.
Also on receiving SIGINT/SIGALRM twice, abort iteration immediately
with tracefs_iterate_stop, making rtla exit right away instead of
waiting for all events to be processed.
- Account for missed events
Due to tracefs buffer overflow, it can happen that rtla misses
events, making the tracing results inaccurate.
Count both the number of missed events and the total number of
processed events, and display missed events as well as their
percentage. The numbers are displayed for both osnoise and timerlat,
even though for the earlier, missed events are generally not
expected.
For hist, the number is displayed at the end of the run; for top, it
is displayed on each printing of the top table.
- Changes to make osnoise more robust
There was a dependency in the code that the first field of the
osnoise_tool structure was the trace field. If that that ever
changed, then the code work break. Change the code to encapsulate
this dependency where the code that uses the structure does not have
this dependency.
* tag 'trace-tools-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (22 commits)
rtla: Report missed event count
rtla: Add function to report missed events
rtla: Count all processed events
rtla: Count missed trace events
tools/rtla: Add osnoise_trace_is_off()
rtla/timerlat_top: Set OSNOISE_WORKLOAD for kernel threads
rtla/timerlat_hist: Set OSNOISE_WORKLOAD for kernel threads
rtla/osnoise: Distinguish missing workload option
rtla/timerlat_top: Abort event processing on second signal
rtla/timerlat_hist: Abort event processing on second signal
rtla/timerlat_top: Stop timerlat tracer on signal
rtla/timerlat_hist: Stop timerlat tracer on signal
rtla: Add trace_instance_stop
tools/rtla: Add basic test suite
verification/dot2k: Implement event type detection
verification/dot2k: Auto patch current kernel source
verification/dot2k: Simplify manual steps in monitor creation
rv: Simplify manual steps in monitor creation
verification/dot2k: Add support for name and description options
verification/dot2k: More robust template variables
...
Pull runtime verifier and osnoise fixes from Steven Rostedt:
- Reset idle tasks on reset for runtime verifier
When the runtime verifier is reset, it resets the task's data that is
being monitored. But it only iterates for_each_process() which does
not include the idle tasks. As the idle tasks can be monitored, they
need to be reset as well.
- Fix the enabling and disabling of tracepoints in osnoise
If timerlat is enabled and the WORKLOAD flag is not set, then the
osnoise tracer will enable the migrate task tracepoint to monitor it
for its own workload. The test to enable the tracepoint is done
against user space modifiable parameters. On disabling of the tracer,
those same parameters are used to determine if the tracepoint should
be disabled. The problem is if user space were to modify the
parameters after it enables the tracer then it may not disable the
tracepoint.
Instead, a static variable is used to keep track if the tracepoint
was enabled or not. Then when the tracer shuts down, it will use this
variable to decide to disable the tracepoint or not, instead of
looking at the user space parameters.
* tag 'trace-rv-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/osnoise: Fix resetting of tracepoints
rv: Reset per-task monitors also for idle tasks
Pull bitmap updates from Yury Norov:
"This includes const_true() series from Vincent Mailhol, another
__always_inline rework from Nathan Chancellor for RISCV, and a couple
of random fixes from Dr. David Alan Gilbert and I Hsin Cheng"
* tag 'bitmap-for-6.14' of https://github.com:/norov/linux:
cpumask: Rephrase comments for cpumask_any*() APIs
cpu: Remove unused init_cpu_online
riscv: Always inline bitops
linux/bits.h: simplify GENMASK_INPUT_CHECK()
compiler.h: add const_true()
Switch away from using sha1 for module signing by default and use the
more modern sha512 instead, which is what among others Arch, Fedora,
RHEL, and Ubuntu are currently using for their kernels.
Sha1 has not been considered secure against well-funded opponents since
2005[1]; since 2011 the NIST and other organizations furthermore
recommended its replacement[2]. This is why OpenSSL on RHEL9, Fedora
Linux 41+[3], and likely some other current and future distributions
reject the creation of sha1 signatures, which leads to a build error of
allmodconfig configurations:
80A20474797F0000:error:03000098:digital envelope routines:do_sigver_init:invalid digest:crypto/evp/m_sigver.c:342:
make[4]: *** [.../certs/Makefile:53: certs/signing_key.pem] Error 1
make[4]: *** Deleting file 'certs/signing_key.pem'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [.../scripts/Makefile.build:478: certs] Error 2
make[2]: *** [.../Makefile:1936: .] Error 2
make[1]: *** [.../Makefile:224: __sub-make] Error 2
make[1]: Leaving directory '...'
make: *** [Makefile:224: __sub-make] Error 2
This change makes allmodconfig work again and sets a default that is
more appropriate for current and future users, too.
Link: https://www.schneier.com/blog/archives/2005/02/cryptanalysis_o.html [1]
Link: https://csrc.nist.gov/projects/hash-functions [2]
Link: https://fedoraproject.org/wiki/Changes/OpenSSLDistrustsha1SigVer [3]
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: kdevops <kdevops@lists.linux.dev> [0]
Link: https://github.com/linux-kdevops/linux-modules-kpd/actions/runs/11420092929/job/31775404330 [0]
Link: https://lore.kernel.org/r/52ee32c0c92afc4d3263cea1f8a1cdc809728aff.1729088288.git.linux@leemhuis.info
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Pull kgdb updates from Daniel Thompson:
"A very small set of changes this kernel cycle.
Two cleanups, one switches to kmap_local_page() (from kmap_atomic())
and the other removes a bit of dead code"
* tag 'kgdb-6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
kdb: Remove unused flags stack
kdb: use kmap_local_page()
Fix the function parameter names to match the function so that
the kernel-doc warnings disappear.
clang.c:273: warning: Function parameter or struct member 'dst' not described in 'gcov_info_add'
clang.c:273: warning: Function parameter or struct member 'src' not described in 'gcov_info_add'
clang.c:273: warning: Excess function parameter 'dest' description in 'gcov_info_add'
clang.c:273: warning: Excess function parameter 'source' description in 'gcov_info_add'
Link: https://lkml.kernel.org/r/20250111062944.910638-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Peter Oberparleiter <oberpar@linux.ibm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Bill Wendling <morbo@google.com>
Cc: Justin Stitt <justinstitt@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Use a ':' instead of a '-' after function parameters to eliminate
kernel-doc warnings.
kernel/latencytop.c:177: warning: Function parameter or struct member 'tsk' not described in '__account_scheduler_latency'
../kernel/latencytop.c:177: warning: Function parameter or struct member 'usecs' not described in '__account_scheduler_latency'
../kernel/latencytop.c:177: warning: Function parameter or struct member 'inter' not described in '__account_scheduler_latency'
Link: https://lkml.kernel.org/r/20250111063019.910730-1-rdunlap@infradead.org
Fixes: ad0b0fd554 ("sched, latencytop: incorporate review feedback from Andrew Morton")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Resending this patch as I haven't received feedback on my initial
submission https://lore.kernel.org/all/20241204182953.10854-1-oxana@cloudflare.com/
For the processes which are terminated abnormally the kernel can provide
a coredump if enabled. When the coredump is performed, the process and
all its threads are put into the D state
(TASK_UNINTERRUPTIBLE | TASK_FREEZABLE).
On the other hand, we have kernel thread khungtaskd which monitors the
processes in the D state. If the task stuck in the D state more than
kernel.hung_task_timeout_secs, the hung_task alert appears in the kernel
log.
The higher memory usage of a process, the longer it takes to create
coredump, the longer tasks are in the D state. We have hung_task alerts
for the processes with memory usage above 10Gb. Although, our
kernel.hung_task_timeout_secs is 10 sec when the default is 120 sec.
Adding additional information to the log that the task is blocked by
coredump will help with monitoring. Another approach might be to
completely filter out alerts for such tasks, but in that case we would
lose transparency about what is putting pressure on some system
resources, e.g. we saw an increase in I/O when coredump occurs due its
writing to disk.
Additionally, it would be helpful to have task_struct->flags in the log
from the function sched_show_task(). Currently it prints
task_struct->thread_info->flags, this seems misleading as the line
starts with "task:xxxx".
[akpm@linux-foundation.org: fix printk control string]
Link: https://lkml.kernel.org/r/20250110160328.64947-1-oxana@cloudflare.com
Signed-off-by: Oxana Kharitonova <oxana@cloudflare.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ben Segall <bsegall@google.com>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If a timerlat tracer is started with the osnoise option OSNOISE_WORKLOAD
disabled, but then that option is enabled and timerlat is removed, the
tracepoints that were enabled on timerlat registration do not get
disabled. If the option is disabled again and timelat is started, then it
triggers a warning in the tracepoint code due to registering the
tracepoint again without ever disabling it.
Do not use the same user space defined options to know to disable the
tracepoints when timerlat is removed. Instead, set a global flag when it
is enabled and use that flag to know to disable the events.
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
~# echo OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo nop > /sys/kernel/tracing/current_tracer
~# echo NO_OSNOISE_WORKLOAD > /sys/kernel/tracing/osnoise/options
~# echo timerlat > /sys/kernel/tracing/current_tracer
Triggers:
------------[ cut here ]------------
WARNING: CPU: 6 PID: 1337 at kernel/tracepoint.c:294 tracepoint_add_func+0x3b6/0x3f0
Modules linked in:
CPU: 6 UID: 0 PID: 1337 Comm: rtla Not tainted 6.13.0-rc4-test-00018-ga867c441128e-dirty #73
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tracepoint_add_func+0x3b6/0x3f0
Code: 48 8b 53 28 48 8b 73 20 4c 89 04 24 e8 23 59 11 00 4c 8b 04 24 e9 36 fe ff ff 0f 0b b8 ea ff ff ff 45 84 e4 0f 84 68 fe ff ff <0f> 0b e9 61 fe ff ff 48 8b 7b 18 48 85 ff 0f 84 4f ff ff ff 49 8b
RSP: 0018:ffffb9b003a87ca0 EFLAGS: 00010202
RAX: 00000000ffffffef RBX: ffffffff92f30860 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bf59e91ccd0 RDI: ffffffff913b6410
RBP: 000000000000000a R08: 00000000000005c7 R09: 0000000000000002
R10: ffffb9b003a87ce0 R11: 0000000000000002 R12: 0000000000000001
R13: ffffb9b003a87ce0 R14: ffffffffffffffef R15: 0000000000000008
FS: 00007fce81209240(0000) GS:ffff9bf6fdd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055e99b728000 CR3: 00000001277c0002 CR4: 0000000000172ef0
Call Trace:
<TASK>
? __warn.cold+0xb7/0x14d
? tracepoint_add_func+0x3b6/0x3f0
? report_bug+0xea/0x170
? handle_bug+0x58/0x90
? exc_invalid_op+0x17/0x70
? asm_exc_invalid_op+0x1a/0x20
? __pfx_trace_sched_migrate_callback+0x10/0x10
? tracepoint_add_func+0x3b6/0x3f0
? __pfx_trace_sched_migrate_callback+0x10/0x10
? __pfx_trace_sched_migrate_callback+0x10/0x10
tracepoint_probe_register+0x78/0xb0
? __pfx_trace_sched_migrate_callback+0x10/0x10
osnoise_workload_start+0x2b5/0x370
timerlat_tracer_init+0x76/0x1b0
tracing_set_tracer+0x244/0x400
tracing_set_trace_write+0xa0/0xe0
vfs_write+0xfc/0x570
? do_sys_openat2+0x9c/0xe0
ksys_write+0x72/0xf0
do_syscall_64+0x79/0x1c0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Tomas Glozar <tglozar@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: John Kacur <jkacur@redhat.com>
Link: https://lore.kernel.org/20250123204159.4450c88e@gandalf.local.home
Fixes: e88ed227f6 ("tracing/timerlat: Add user-space interface")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull x86 boot updates from Ingo Molnar:
- A large and involved preparatory series to pave the way to add
exception handling for relocate_kernel - which will be a debugging
facility that has aided in the field to debug an exceptionally hard
to debug early boot bug. Plus assorted cleanups and fixes that were
discovered along the way, by David Woodhouse:
- Clean up and document register use in relocate_kernel_64.S
- Use named labels in swap_pages in relocate_kernel_64.S
- Only swap pages for ::preserve_context mode
- Allocate PGD for x86_64 transition page tables separately
- Copy control page into place in machine_kexec_prepare()
- Invoke copy of relocate_kernel() instead of the original
- Move relocate_kernel to kernel .data section
- Add data section to relocate_kernel
- Drop page_list argument from relocate_kernel()
- Eliminate writes through kernel mapping of relocate_kernel page
- Clean up register usage in relocate_kernel()
- Mark relocate_kernel page as ROX instead of RWX
- Disable global pages before writing to control page
- Ensure preserve_context flag is set on return to kernel
- Use correct swap page in swap_pages function
- Fix stack and handling of re-entry point for ::preserve_context
- Mark machine_kexec() with __nocfi
- Cope with relocate_kernel() not being at the start of the page
- Use typedef for relocate_kernel_fn function prototype
- Fix location of relocate_kernel with -ffunction-sections (fix by Nathan Chancellor)
- A series to remove the last remaining absolute symbol references from
.head.text, and enforce this at build time, by Ard Biesheuvel:
- Avoid WARN()s and panic()s in early boot code
- Don't hang but terminate on failure to remap SVSM CA
- Determine VA/PA offset before entering C code
- Avoid intentional absolute symbol references in .head.text
- Disable UBSAN in early boot code
- Move ENTRY_TEXT to the start of the image
- Move .head.text into its own output section
- Reject absolute references in .head.text
- The above build-time enforcement uncovered a handful of bugs of
essentially non-working code, and a wrokaround for a toolchain bug,
fixed by Ard Biesheuvel as well:
- Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12
- Disable UBSAN on SEV code that may execute very early
- Disable ftrace branch profiling in SEV startup code
- And miscellaneous cleanups:
- kexec_core: Add and update comments regarding the KEXEC_JUMP flow (Rafael J. Wysocki)
- x86/sysfs: Constify 'struct bin_attribute' (Thomas Weißschuh)"
* tag 'x86-boot-2025-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
x86/sev: Disable ftrace branch profiling in SEV startup code
x86/kexec: Use typedef for relocate_kernel_fn function prototype
x86/kexec: Cope with relocate_kernel() not being at the start of the page
kexec_core: Add and update comments regarding the KEXEC_JUMP flow
x86/kexec: Mark machine_kexec() with __nocfi
x86/kexec: Fix location of relocate_kernel with -ffunction-sections
x86/kexec: Fix stack and handling of re-entry point for ::preserve_context
x86/kexec: Use correct swap page in swap_pages function
x86/kexec: Ensure preserve_context flag is set on return to kernel
x86/kexec: Disable global pages before writing to control page
x86/sev: Don't hang but terminate on failure to remap SVSM CA
x86/sev: Disable UBSAN on SEV code that may execute very early
x86/boot/64: Fix spurious undefined reference when CONFIG_X86_5LEVEL=n, on GCC-12
x86/sysfs: Constify 'struct bin_attribute'
x86/kexec: Mark relocate_kernel page as ROX instead of RWX
x86/kexec: Clean up register usage in relocate_kernel()
x86/kexec: Eliminate writes through kernel mapping of relocate_kernel page
x86/kexec: Drop page_list argument from relocate_kernel()
x86/kexec: Add data section to relocate_kernel
x86/kexec: Move relocate_kernel to kernel .data section
...
Pull sched_ext updates from Tejun Heo:
- scx_bpf_now() added so that BPF scheduler can access the cached
timestamp in struct rq to avoid reading TSC multiple times within a
locked scheduling operation.
- Minor updates to the built-in idle CPU selection logic.
- tool/sched_ext updates and other misc changes.
* tag 'sched_ext-for-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: fix kernel-doc warnings
sched_ext: Use time helpers in BPF schedulers
sched_ext: Replace bpf_ktime_get_ns() to scx_bpf_now()
sched_ext: Add time helpers for BPF schedulers
sched_ext: Add scx_bpf_now() for BPF scheduler
sched_ext: Implement scx_bpf_now()
sched_ext: Relocate scx_enabled() related code
sched_ext: Add option -l in selftest runner to list all available tests
sched_ext: Include remaining task time slice in error state dump
sched_ext: update scx_bpf_dsq_insert() doc for SCX_DSQ_LOCAL_ON
sched_ext: idle: small CPU iteration refactoring
sched_ext: idle: introduce check_builtin_idle_enabled() helper
sched_ext: idle: clarify comments
sched_ext: idle: use assign_cpu() to update the idle cpumask
sched_ext: Use str_enabled_disabled() helper in update_selcpu_topology()
sched_ext: Use sizeof_field for key_len in dsq_hash_params
tools/sched_ext: Receive updates from SCX repo
sched_ext: Use the NUMA scheduling domain for NUMA optimizations
Pull trace fing buffer fix from Steven Rostedt:
"Fix atomic64 operations on some architectures for the tracing ring
buffer:
- Have emulating atomic64 use arch_spin_locks instead of
raw_spin_locks
The tracing ring buffer events have a small timestamp that holds
the delta between itself and the event before it. But this can be
tricky to update when interrupts come in. It originally just set
the deltas to zero for events that interrupted the adding of
another event which made all the events in the interrupt have the
same timestamp as the event it interrupted. This was not suitable
for many tools, so it was eventually fixed. But that fix required
adding an atomic64 cmpxchg on the timestamp in cases where an event
was added while another event was in the process of being added.
Originally, for 32 bit architectures, the manipulation of the 64
bit timestamp was done by a structure that held multiple 32bit
words to hold parts of the timestamp and a counter. But as updates
to the ring buffer were done, maintaining this became too complex
and was replaced by the atomic64 generic operations which are now
used by both 64bit and 32bit architectures. Shortly after that, it
was reported that riscv32 and other 32 bit architectures that just
used the generic atomic64 were locking up. This was because the
generic atomic64 operations defined in lib/atomic64.c uses a
raw_spin_lock() to emulate an atomic64 operation. The problem here
was that raw_spin_lock() can also be traced by the function tracer
(which is commonly used for debugging raw spin locks). Since the
function tracer uses the tracing ring buffer, which now is being
traced internally, this was triggering a recursion and setting off
a warning that the spin locks were recusing.
There's no reason for the code that emulates atomic64 operations to
be using raw_spin_locks which have a lot of debugging
infrastructure attached to them (depending on the config options).
Instead it should be using the arch_spin_lock() which does not have
any infrastructure attached to them and is used by low level
infrastructure like RCU locks, lockdep and of course tracing. Using
arch_spin_lock()s fixes this issue.
- Do not trace in NMI if the architecture uses emulated atomic64
operations
Another issue with using the emulated atomic64 operations that uses
spin locks to emulate the atomic64 operations is that they cannot
be used in NMI context. As an NMI can trigger while holding the
atomic64 spin locks it can try to take the same lock and cause a
deadlock.
Have the ring buffer fail recording events if in NMI context and
the architecture uses the emulated atomic64 operations"
* tag 'trace-ringbuffer-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
atomic64: Use arch_spin_locks instead of raw_spin_locks
ring-buffer: Do not allow events in NMI with generic atomic64 cmpxchg()
Pull fgraph updates from Steven Rostedt:
"Remove calltime and rettime from fgraph infrastructure
The calltime and rettime were used by the function graph tracer to
calculate the timings of functions where it traced their entry and
exit. The calltime and rettime were stored in the generic structures
that were used for the mechanisms to add an entry and exit callback.
Now that function graph infrastructure is used by other subsystems
than just the tracer, the calltime and rettime are not needed for
them. Remove the calltime and rettime from the generic fgraph
infrastructure and have the callers that require them handle them"
* tag 'ftrace-v6.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
fgraph: Remove calltime and rettime from generic operations
Pull tracing updates from Steven Rostedt:
- Cleanup with guard() and free() helpers
There were several places in the code that had a lot of "goto out" in
the error paths to either unlock a lock or free some memory that was
allocated. But this is error prone. Convert the code over to use the
guard() and free() helpers that let the compiler unlock locks or free
memory when the function exits.
- Update the Rust tracepoint code to use the C code too
There was some duplication of the tracepoint code for Rust that did
the same logic as the C code. Add a helper that makes it possible for
both algorithms to use the same logic in one place.
- Add poll to trace event hist files
It is useful to know when an event is triggered, or even with some
filtering. Since hist files of events get updated when active and the
event is triggered, allow applications to poll the hist file and wake
up when an event is triggered. This will let the application know
that the event it is waiting for happened.
- Add :mod: command to enable events for current or future modules
The function tracer already has a way to enable functions to be
traced in modules by writing ":mod:<module>" into set_ftrace_filter.
That will enable either all the functions for the module if it is
loaded, or if it is not, it will cache that command, and when the
module is loaded that matches <module>, its functions will be
enabled. This also allows init functions to be traced. But currently
events do not have that feature.
Add the command where if ':mod:<module>' is written into set_event,
then either all the modules events are enabled if it is loaded, or
cache it so that the module's events are enabled when it is loaded.
This also works from the kernel command line, where
"trace_event=:mod:<module>", when the module is loaded at boot up,
its events will be enabled then.
* tag 'trace-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (26 commits)
tracing: Fix output of set_event for some cached module events
tracing: Fix allocation of printing set_event file content
tracing: Rename update_cache() to update_mod_cache()
tracing: Fix #if CONFIG_MODULES to #ifdef CONFIG_MODULES
selftests/ftrace: Add test that tests event :mod: commands
tracing: Cache ":mod:" events for modules not loaded yet
tracing: Add :mod: command to enabled module events
selftests/tracing: Add hist poll() support test
tracing/hist: Support POLLPRI event for poll on histogram
tracing/hist: Add poll(POLLIN) support on hist file
tracing: Fix using ret variable in tracing_set_tracer()
tracepoint: Reduce duplication of __DO_TRACE_CALL
tracing/string: Create and use __free(argv_free) in trace_dynevent.c
tracing: Switch trace_stat.c code over to use guard()
tracing: Switch trace_stack.c code over to use guard()
tracing: Switch trace_osnoise.c code over to use guard() and __free()
tracing: Switch trace_events_synth.c code over to use guard()
tracing: Switch trace_events_filter.c code over to use guard()
tracing: Switch trace_events_trigger.c code over to use guard()
tracing: Switch trace_events_hist.c code over to use guard()
...
Pull probes updates from Masami Hiramatsu:
- kprobes: Cleanups using guard() and __free(): Use cleanup.h macros to
cleanup code and remove all gotos from kprobes code.
- tracing/probes: Also cleanups tracing/*probe events code with guard()
and __free(). These patches are just to simplify the parser codes.
- kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
This reduces preempt disable time to only when getting the module
refcount in check_kprobe_access_safe().
Previously it disabled preempt needlessly for other checks including
jump_label_text_reserved(), which took a long time because of the
linear search.
* tag 'probes-v6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing/kprobes: Simplify __trace_kprobe_create() by removing gotos
tracing: Use __free() for kprobe events to cleanup
tracing: Use __free() in trace_probe for cleanup
kprobes: Remove remaining gotos
kprobes: Remove unneeded goto
kprobes: Use guard for rcu_read_lock
kprobes: Use guard() for external locks
jump_label: Define guard() for jump_label_lock
tracing/eprobe: Adopt guard() and scoped_guard()
tracing/uprobe: Adopt guard() and scoped_guard()
tracing/kprobe: Adopt guard() and scoped_guard()
kprobes: Adopt guard() and scoped_guard()
kprobes: Reduce preempt disable scope in check_kprobe_access_safe()
Pull fsnotify pre-content notification support from Jan Kara:
"This introduces a new fsnotify event (FS_PRE_ACCESS) that gets
generated before a file contents is accessed.
The event is synchronous so if there is listener for this event, the
kernel waits for reply. On success the execution continues as usual,
on failure we propagate the error to userspace. This allows userspace
to fill in file content on demand from slow storage. The context in
which the events are generated has been picked so that we don't hold
any locks and thus there's no risk of a deadlock for the userspace
handler.
The new pre-content event is available only for users with global
CAP_SYS_ADMIN capability (similarly to other parts of fanotify
functionality) and it is an administrator responsibility to make sure
the userspace event handler doesn't do stupid stuff that can DoS the
system.
Based on your feedback from the last submission, fsnotify code has
been improved and now file->f_mode encodes whether pre-content event
needs to be generated for the file so the fast path when nobody wants
pre-content event for the file just grows the additional file->f_mode
check. As a bonus this also removes the checks whether the old
FS_ACCESS event needs to be generated from the fast path. Also the
place where the event is generated during page fault has been moved so
now filemap_fault() generates the event if and only if there is no
uptodate folio in the page cache.
Also we have dropped FS_PRE_MODIFY event as current real-world users
of the pre-content functionality don't really use it so let's start
with the minimal useful feature set"
* tag 'fsnotify_hsm_for_v6.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: (21 commits)
fanotify: Fix crash in fanotify_init(2)
fs: don't block write during exec on pre-content watched files
fs: enable pre-content events on supported file systems
ext4: add pre-content fsnotify hook for DAX faults
btrfs: disable defrag on pre-content watched files
xfs: add pre-content fsnotify hook for DAX faults
fsnotify: generate pre-content permission event on page fault
mm: don't allow huge faults for files with pre content watches
fanotify: disable readahead if we have pre-content watches
fanotify: allow to set errno in FAN_DENY permission response
fanotify: report file range info with pre-content events
fanotify: introduce FAN_PRE_ACCESS permission event
fsnotify: generate pre-content permission event on truncate
fsnotify: pass optional file access range in pre-content event
fsnotify: introduce pre-content permission events
fanotify: reserve event bit of deprecated FAN_DIR_MODIFY
fanotify: rename a misnamed constant
fanotify: don't skip extra event info if no info_mode is set
fsnotify: check if file is actually being watched for pre-content events on open
fsnotify: opt-in for permission events at file open time
...
Pull bpf updates from Alexei Starovoitov:
"A smaller than usual release cycle.
The main changes are:
- Prepare selftest to run with GCC-BPF backend (Ihor Solodrai)
In addition to LLVM-BPF runs the BPF CI now runs GCC-BPF in compile
only mode. Half of the tests are failing, since support for
btf_decl_tag is still WIP, but this is a great milestone.
- Convert various samples/bpf to selftests/bpf/test_progs format
(Alexis Lothoré and Bastien Curutchet)
- Teach verifier to recognize that array lookup with constant
in-range index will always succeed (Daniel Xu)
- Cleanup migrate disable scope in BPF maps (Hou Tao)
- Fix bpf_timer destroy path in PREEMPT_RT (Hou Tao)
- Always use bpf_mem_alloc in bpf_local_storage in PREEMPT_RT (Martin
KaFai Lau)
- Refactor verifier lock support (Kumar Kartikeya Dwivedi)
This is a prerequisite for upcoming resilient spin lock.
- Remove excessive 'may_goto +0' instructions in the verifier that
LLVM leaves when unrolls the loops (Yonghong Song)
- Remove unhelpful bpf_probe_write_user() warning message (Marco
Elver)
- Add fd_array_cnt attribute for prog_load command (Anton Protopopov)
This is a prerequisite for upcoming support for static_branch"
* tag 'bpf-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (125 commits)
selftests/bpf: Add some tests related to 'may_goto 0' insns
bpf: Remove 'may_goto 0' instruction in opt_remove_nops()
bpf: Allow 'may_goto 0' instruction in verifier
selftests/bpf: Add test case for the freeing of bpf_timer
bpf: Cancel the running bpf_timer through kworker for PREEMPT_RT
bpf: Free element after unlock in __htab_map_lookup_and_delete_elem()
bpf: Bail out early in __htab_map_lookup_and_delete_elem()
bpf: Free special fields after unlock in htab_lru_map_delete_node()
tools: Sync if_xdp.h uapi tooling header
libbpf: Work around kernel inconsistently stripping '.llvm.' suffix
bpf: selftests: verifier: Add nullness elision tests
bpf: verifier: Support eliding map lookup nullness
bpf: verifier: Refactor helper access type tracking
bpf: tcp: Mark bpf_load_hdr_opt() arg2 as read-write
bpf: verifier: Add missing newline on verbose() call
selftests/bpf: Add distilled BTF test about marking BTF_IS_EMBEDDED
libbpf: Fix incorrect traversal end type ID when marking BTF_IS_EMBEDDED
libbpf: Fix return zero when elf_begin failed
selftests/bpf: Fix btf leak on new btf alloc failure in btf_distill test
veristat: Load struct_ops programs only once
...
