Pull thermal updates from Daniel Lezcano:
- Use the newly introduced 'hot' and 'critical' ops for the acpi
thermal driver (Daniel Lezcano)
- Remove the notify ops as it is no longer used (Daniel Lezcano)
- Remove the 'forced passive' option and the unused bind/unbind
functions (Daniel Lezcano)
- Remove the THERMAL_TRIPS_NONE and the code cleanup around this macro
(Daniel Lezcano)
- Rework the delays to make them pre-computed instead of computing them
again and again at each polling interval (Daniel Lezcano)
- Remove the pointless 'thermal_zone_device_reset' function (Daniel
Lezcano)
- Use the critical and hot ops to prevent an unexpected system shutdown
on int340x (Kai-Heng Feng)
- Make the cooling device state private to the thermal subsystem
(Daniel Lezcano)
- Prevent to use not-power-aware actor devices with the power allocator
governor (Lukasz Luba)
- Remove 'zx' and 'tango' support along with the corresponding
platforms (Arnd Bergman)
- Fix several issues on the Omap thermal driver (Tony Lindgren)
- Add support for adc-tm5 PMIC thermal monitor for Qcom platforms
(Dmitry Baryshkov)
- Fix an initialization loop in the adc-tm5 (Colin Ian King)
- Fix a return error check in the cpufreq cooling device (Viresh Kumar)
* tag 'thermal-v5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal: cpufreq_cooling: freq_qos_update_request() returns < 0 on error
thermal: qcom: Fix comparison with uninitialized variable channels_available
thermal: qcom: add support for adc-tm5 PMIC thermal monitor
dt-bindings: thermal: qcom: add adc-thermal monitor bindings
thermal: ti-soc-thermal: Use non-inverted define for omap4
thermal: ti-soc-thermal: Simplify polling with iopoll
thermal: ti-soc-thermal: Fix stuck sensor with continuous mode for 4430
thermal: ti-soc-thermal: Skip pointless register access for dra7
thermal/drivers/zx: Remove zx driver
thermal/drivers/tango: Remove tango driver
thermal: power allocator: fail binding for non-power actor devices
thermal/core: Make cooling device state change private
thermal: intel: pch: Fix unexpected shutdown at critical temperature
thermal: int340x: Fix unexpected shutdown at critical temperature
thermal/core: Remove pointless thermal_zone_device_reset() function
thermal/core: Remove ms based delay fields
thermal/core: Use precomputed jiffies for the polling
thermal/core: Precompute the delays from msecs to jiffies
thermal/core: Remove unused macro THERMAL_TRIPS_NONE
thermal/core: Remove THERMAL_TRIPS_NONE test
...
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- Microsoft Surface devices System Aggregator Module support
- SW_TABLET_MODE reporting improvements
- thinkpad_acpi keyboard language setting support
- platform / DPTF profile settings support:
- Base / userspace API parts merged from Rafael's acpi-platform
branch
- thinkpad_acpi and ideapad-laptop support through pdx86
- Remove support for some obsolete Intel MID platforms through
merging of the shared intel-mid-removal branch
- Big cleanup of the ideapad-laptop driver
- Misc other fixes / new hw support / quirks"
* tag 'platform-drivers-x86-v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (99 commits)
platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds
platform/surface: aggregator: Fix access of unaligned value
tools/power/x86/intel-speed-select: Update version to 1.8
tools/power/x86/intel-speed-select: Add new command to get/set TRL
tools/power/x86/intel-speed-select: Add new command turbo-mode
Platform: OLPC: Constify static struct regulator_ops
platform/surface: Add Surface Hot-Plug driver
platform/x86: intel_scu_wdt: Drop mistakenly added const
platform/x86: Kconfig: add missing selects for ideapad-laptop
platform/x86: acer-wmi: Don't use ACPI_EXCEPTION()
platform/x86: thinkpad_acpi: Replace ifdef CONFIG_ACPI_PLATFORM_PROFILE with depends on
platform/x86: thinkpad_acpi: Fix 'warning: no previous prototype for' warnings
platform/x86: msi-wmi: Fix variable 'status' set but not used compiler warning
platform/surface: surface3-wmi: Fix variable 'status' set but not used compiler warning
platform/x86: Move all dell drivers to their own subdirectory
Documentation/ABI: sysfs-platform-ideapad-laptop: conservation_mode attribute
Documentation/ABI: sysfs-platform-ideapad-laptop: update device attribute paths
platform/x86: ideapad-laptop: add "always on USB charging" control support
platform/x86: ideapad-laptop: add keyboard backlight control support
platform/x86: ideapad-laptop: send notification about touchpad state change to sysfs
...
ACPI_EXCEPTION is only intended for internal use by the ACPICA code.
ACPI_EXCEPTION was being used here to change the apci_status code into
something human-readable, use acpi_format_exception() for this instead,
which is the proper way to do this outside of ACPICA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140205.268344-1-hdegoede@redhat.com
With the #if IS_ENABLED(CONFIG_ACPI_PLATFORM_PROFILE), we get the following
errors when thinkpad_acpi is builtin while CONFIG_ACPI_PLATFORM_PROFILE=m :
drivers/platform/x86/thinkpad_acpi.c:10186: undefined reference to `platform_profile_notify'
drivers/platform/x86/thinkpad_acpi.c:10226: undefined reference to `platform_profile_register'
drivers/platform/x86/thinkpad_acpi.c:10246: undefined reference to `platform_profile_remove'
This could be fixed by changing the IS_ENABLED to IS_REACHABLE, but
I believe that it is better to just switch to using depends on.
Using depends on ensures that platform-profile support is always
available when thinkpad_acpi is build, hopefully leading to less
confusing bug-reports about it sometimes not working.
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140158.268289-2-hdegoede@redhat.com
Some of the new dytc handling functions are not marked static, even though
they are only used internally.
Mark these static, fixing the following compiler warnings:
drivers/platform/x86/thinkpad_acpi.c:10081:5: warning: no previous prototype for 'dytc_profile_get' [-Wmissing-prototypes]
drivers/platform/x86/thinkpad_acpi.c:10095:5: warning: no previous prototype for 'dytc_cql_command' [-Wmissing-prototypes]
drivers/platform/x86/thinkpad_acpi.c:10133:5: warning: no previous prototype for 'dytc_profile_set' [-Wmissing-prototypes]
Cc: Mark Pearson <markpearson@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210204140158.268289-1-hdegoede@redhat.com
Certain models have a so-called "always on USB charging" feature,
which enables USB charging even when the computer is turned off
or suspended, and which may be controlled/queried using the
SALS/HALS ACPI methods. Expose this functionality via a new device
attribute (usb_charging). Tested on: Lenovo YOGA 520-14IKB 80X8
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-28-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fix all checkpatch warnings. Reorder variable definitions from
longest to shortest. Add more whitespaces for better readability.
Rename variables named `ret` to `err` where appropriate. Reorder
sysfs attributes show/store callbacks and the `ideapad_attributes`
array in lexicographic order. And other minor formatting changes.
No significant functional changes are intended.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-25-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Create dedicated helper functions for accessing the main ACPI methods:
GBMD, SMBC, HALS, SALS; and utilize them. Use `unsigned long` consistently
in every ACPI helper wherever possible. Change names to better express
purpose. Do not assign values to output parameters in case of failure.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-18-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Do not handle zero length buffer separately. Use kstrtouint() instead
of sscanf(). Use kstrtobool() in store_ideapad_cam(). These
introduce minor ABI changes, but it is expected that no users rely
on the previous behavior. Thus the change is deemed justifed.
Additionally, use `!!` to convert to `int` and use the "%d" format
specifier in sysfs_emit() for boolean-like attributes.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-16-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Consumers can differentiate an error from a successful read much more
easily if the read() call fails with an appropriate errno instead of
returning a magic string like "-1". This introduces an ABI change, but
not many users are expected to be relying on the previous behavior,
and this change makes this module conforming to the standard behavior
that sysfs attribute show/store callbacks return an appropriate
errno in case of failure. Thus the ABI breakage is deemed justified.
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210203215403.290792-15-pobrn@protonmail.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
ib-drm-gpio-pdx86-rtc-wdt for v5.12-1
First part of Intel MID outdated platforms removal.
The following is an automated git shortlog grouped by driver:
drm/gma500:
- Get rid of duplicate NULL checks
- Convert to use new SCU IPC API
gpio:
- msic: Remove driver for deprecated platform
- intel-mid: Remove driver for deprecated platform
intel_mid_powerbtn:
- Remove driver for deprecated platform
intel_mid_thermal:
- Remove driver for deprecated platform
intel_scu_wdt:
- Get rid of custom x86 model comparison
- Drop SCU notification
- Move driver from arch/x86
rtc:
- mrst: Remove driver for deprecated platform
watchdog:
- intel-mid_wdt: Postpone IRQ handler registration till SCU is ready
- intel_scu_watchdog: Remove driver for deprecated platform
Add support to ideapad-laptop for Lenovo platforms that have DYTC
version 5 support or newer to use the platform profile feature.
Mostly based on Mark Pearson <markpearson@lenovo.com>'s thinkpad-acpi
work but massaged to fit ideapad driver.
Note that different from ThinkPads, IdeaPads's Thermal Hotkey won't
trigger profile switch itself, we'll leave it for userspace programs.
Tested on Lenovo Yoga-14S ARE Chinese Edition.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210105131447.38036-3-jiaxun.yang@flygoat.com
[hdegoede@redhat.com s/QUIET/LOW_POWER/]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The previous commit adding new sysfs for keyboard language has warning and
few code correction has to be done as per new review comments.
Below changes has been addressed in this version:
- corrected warning. Many thanks to kernel test robot <lkp@intel.com> for
reporting and determining this warning.
- used sysfs_emit_at() API instead of strcat.
- sorted keyboard language array.
- removed unwanted space and corrected sentences.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Nitin Joshi <njoshi1@lenovo.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210202003210.91773-1-njoshi1@lenovo.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
All recent ThinkPad BIOS-es support the GSKL method used to query the
keyboard-layout used by the ECFW for the SHIFT + other-key key-press
emulation for special keys such as e.g. the '=', '(' and ')' keys
above the numpad on 15" models.
So just checking for the method is not a good indicator of the
model supporting getting/setting the keyboard_lang.
On models where this is not supported GSKL succeeds, but it returns
METHOD_ERR in the returned integer to indicate that this is not
supported on this model.
Add a check for METHOD_ERR and return -ENODEV if it is set to
avoid registering a non-working keyboard_lang sysfs-attr on models
where this is not supported.
Cc: Nitin Joshi <njoshi1@lenovo.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210125205258.135664-1-hdegoede@redhat.com
An upcoming Dell platform is causing a NULL pointer dereference
in dell-wmi-sysman initialization. Validate that the input from
BIOS matches correct ACPI types and abort module initialization
if it fails.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210129172654.2326751-1-mario.limonciello@dell.com
[hdegoede@redhat.com: Drop redundant release_attributes_data() call]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
An upcoming Dell platform is causing a NULL pointer dereference
in dell-wmi-sysman initialization. Validate that the input from
BIOS matches correct ACPI types and abort module initialization
if it fails.
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Tested-by: Perry Yuan <perry_yuan@dell.com>
Link: https://lore.kernel.org/r/20210129172654.2326751-1-mario.limonciello@dell.com
[hdegoede@redhat.com: Drop redundant release_attributes_data() call]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
