dump_user_range() is used to copy the user page to a coredump file, but if
a hardware memory error occurred during copy, which called from
__kernel_write_iter() in dump_user_range(), it crashes,
CPU: 112 PID: 7014 Comm: mca-recover Not tainted 6.3.0-rc2 #425
pc : __memcpy+0x110/0x260
lr : _copy_from_iter+0x3bc/0x4c8
...
Call trace:
__memcpy+0x110/0x260
copy_page_from_iter+0xcc/0x130
pipe_write+0x164/0x6d8
__kernel_write_iter+0x9c/0x210
dump_user_range+0xc8/0x1d8
elf_core_dump+0x308/0x368
do_coredump+0x2e8/0xa40
get_signal+0x59c/0x788
do_signal+0x118/0x1f8
do_notify_resume+0xf0/0x280
el0_da+0x130/0x138
el0t_64_sync_handler+0x68/0xc0
el0t_64_sync+0x188/0x190
Generally, the '->write_iter' of file ops will use copy_page_from_iter()
and copy_page_from_iter_atomic(), change memcpy() to copy_mc_to_kernel()
in both of them to handle #MC during source read, which stop coredump
processing and kill the task instead of kernel panic, but the source
address may not always a user address, so introduce a new copy_mc flag in
struct iov_iter{} to indicate that the iter could do a safe memory copy,
also introduce the helpers to set/cleck the flag, for now, it's only used
in coredump's dump_user_range(), but it could expand to any other
scenarios to fix the similar issue.
Link: https://lkml.kernel.org/r/20230417045323.11054-1-wangkefeng.wang@huawei.com
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Tong Tiangen <tongtiangen@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Now the __pageblock_pfn_to_page() is used by set_zone_contiguous(), which
checks whether the given zone contains holes, and uses
pfn_to_online_page() to validate if the start pfn is online and valid, as
well as using pfn_valid() to validate the end pfn.
However, the __pageblock_pfn_to_page() function may return non-NULL even
if the end pfn of a pageblock is in a memory hole in some situations. For
example, if the pageblock order is MAX_ORDER, which will fall into 2
sub-sections, and the end pfn of the pageblock may be hole even though the
start pfn is online and valid.
See below memory layout as an example and suppose the pageblock order is
MAX_ORDER.
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000040000000-0x00000000ffffffff]
[ 0.000000] DMA32 empty
[ 0.000000] Normal [mem 0x0000000100000000-0x0000001fa7ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000040000000-0x0000001fa3c7ffff]
[ 0.000000] node 0: [mem 0x0000001fa3c80000-0x0000001fa3ffffff]
[ 0.000000] node 0: [mem 0x0000001fa4000000-0x0000001fa402ffff]
[ 0.000000] node 0: [mem 0x0000001fa4030000-0x0000001fa40effff]
[ 0.000000] node 0: [mem 0x0000001fa40f0000-0x0000001fa73cffff]
[ 0.000000] node 0: [mem 0x0000001fa73d0000-0x0000001fa745ffff]
[ 0.000000] node 0: [mem 0x0000001fa7460000-0x0000001fa746ffff]
[ 0.000000] node 0: [mem 0x0000001fa7470000-0x0000001fa758ffff]
[ 0.000000] node 0: [mem 0x0000001fa7590000-0x0000001fa7dfffff]
Focus on the last memory range, and there is a hole for the range [mem
0x0000001fa7590000-0x0000001fa7dfffff]. That means the last pageblock
will contain the range from 0x1fa7c00000 to 0x1fa7ffffff, since the
pageblock must be 4M aligned. And in this pageblock, these pfns will fall
into 2 sub-section (the sub-section size is 2M aligned).
So, the 1st sub-section (indicates pfn range: 0x1fa7c00000 - 0x1fa7dfffff
) in this pageblock is valid by calling subsection_map_init() in
free_area_init(), but the 2nd sub-section (indicates pfn range:
0x1fa7e00000 - 0x1fa7ffffff ) in this pageblock is not valid.
This did not break anything until now, but the zone continuous is fragile
in this possible scenario. So as previous discussion[1], it is better to
add some comments to explain this possible issue in case there are some
future pfn walkers that rely on this.
[1] https://lore.kernel.org/all/87r0sdsmr6.fsf@yhuang6-desk2.ccr.corp.intel.com/
Link: https://lkml.kernel.org/r/5c26368865e79c743a453dea48d30670b19d2e4f.1682425534.git.baolin.wang@linux.alibaba.com
Link: https://lkml.kernel.org/r/5c26368865e79c743a453dea48d30670b19d2e4f.1682425534.git.baolin.wang@linux.alibaba.com
Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pull pin control updates from Linus Walleij:
"Mostly drivers! Nothing special: some new Qualcomm chips as usual, and
the new NXP S32 and nVidia BlueField-3.
Core changes:
- Make a lot of pin controllers with GPIO and irqchips immutable,
i.e. not living structs, but const structs. This is driving a
changed initiated by the irqchip maintainers.
New drivers:
- New driver for the NXP S32 SoC pin controller
- As part of a thorough cleanup and restructuring of the
Ralink/Mediatek drivers, the Ralink MIPS pin control drivers were
folded into the Mediatek directory and the family is renamed
"mtmips". The Ralink chips live on as Mediatek MIPS family where
new variants can be added. As part of this work also the device
tree bindings were reworked.
- New subdriver for the Qualcomm SM7150 SoC.
- New subdriver for the Qualcomm IPQ9574 SoC.
- New driver for the nVidia BlueField-3 SoC.
- Support for the Qualcomm PMM8654AU mixed signal circuit GPIO.
- Support for the Qualcomm PMI632 mixed signal circuit GPIO.
Improvements:
- Add some missing pins and generic cleanups on the Renesas r8a779g0
and r8a779g0 pin controllers. Generic Renesas extension for power
source selection on several SoCs.
- Misc cleanups for the Atmel AT91 and AT91-PIO4 pin controllers
- Make the GPIO mode work on the Qualcomm SM8550-lpass-lpi driver.
- Several device tree binding cleanups as the binding YAML syntax is
solidifying"
* tag 'pinctrl-v6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (153 commits)
pinctrl-bcm2835.c: fix race condition when setting gpio dir
dt-bindings: pinctrl: qcom,sm8150: Drop duplicate function value "atest_usb2"
dt-bindings: pinctrl: qcom: Add few missing functions
pinctrl: qcom: spmi-gpio: Add PMI632 support
dt-bindings: pinctrl: qcom,pmic-gpio: add PMI632
pinctrl: wpcm450: select MFD_SYSCON
pinctrl: qcom ssbi-gpio: Convert to immutable irq_chip
pinctrl: qcom ssbi-mpp: Convert to immutable irq_chip
pinctrl: qcom spmi-mpp: Convert to immutable irq_chip
pinctrl: plgpio: Convert to immutable irq_chip
pinctrl: pistachio: Convert to immutable irq_chip
pinctrl: pic32: Convert to immutable irq_chip
pinctrl: sx150x: Convert to immutable irq_chip
pinctrl: stmfx: Convert to immutable irq_chip
pinctrl: st: Convert to immutable irq_chip
pinctrl: mcp23s08: Convert to immutable irq_chip
pinctrl: equilibrium: Convert to immutable irq_chip
pinctrl: npcm7xx: Convert to immutable irq_chip
pinctrl: armada-37xx: Convert to immutable irq_chip
pinctrl: nsp: Convert to immutable irq_chip
...
Pull VFIO updates from Alex Williamson:
- Expose and allow R/W access to the PCIe DVSEC capability through
vfio-pci, as we already do with the legacy vendor capability
(K V P Satyanarayana)
- Fix kernel-doc issues with structure definitions (Simon Horman)
- Clarify ordering of operations relative to the kvm-vfio device for
driver dependencies against the kvm pointer (Yi Liu)
* tag 'vfio-v6.4-rc1' of https://github.com/awilliam/linux-vfio:
docs: kvm: vfio: Suggest KVM_DEV_VFIO_GROUP_ADD vs VFIO_GROUP_GET_DEVICE_FD ordering
vfio: correct kdoc for ops structures
vfio/pci: Add DVSEC PCI Extended Config Capability to user visible list.
Pull AFS updates from David Howells:
"Three fixes to AFS directory handling:
- Make sure that afs_read_dir() sees any increase in file size if the
file unexpectedly changed on the server (e.g. due to another client
making a change).
- Make afs_getattr() always return the server's dir file size, not
the locally edited one, so that pagecache eviction doesn't cause
the dir file size to change unexpectedly.
- Prevent afs_read_dir() from getting into an endless loop if the
server indicates that the directory file size is larger than
expected"
* tag 'afs-fixes-20230502' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Avoid endless loop if file is larger than expected
afs: Fix getattr to report server i_size on dirs, not local size
afs: Fix updating of i_size with dv jump from server
Pull MFD updates from Lee Jones:
"New Drivers:
- Add support for Renesas RZ/G2L MTU3
New Device Support:
- Add support for Lenovo Yoga Book X90F to Intel CHT WC
- Add support for MAX5970 and MAX5978 to Simple MFD (I2C)
- Add support for Meteor Lake PCH-S LPSS PCI to Intel LPSS PCI
- Add support for AXP15060 PMIC to X-Powers PMIC collection
Remove Device Support:
- Remove support for Samsung 5M8751 and S5M8763 PMIC devices
New Functionality:
- Convert deprecated QCOM IRQ Chip to config registers
- Add support for 32-bit address spaces to Renesas SMUs
Fix-ups:
- Make use of APIs / MACROs designed to simplify and demystify
- Add / improve Device Tree bindings
- Memory saving struct layout optimisations
- Remove old / deprecated functionality
- Factor out unassigned register addresses from ranges
- Trivial: Spelling fixes, renames and coding style fixes
- Rid 'defined but not used' warnings
- Remove ineffective casts and pointer stubs
Bug Fixes:
- Fix incorrectly non-inverted mask/unmask IRQs on QCOM platforms
- Remove MODULE_*() helpers from non-tristate drivers
- Do not attempt to use out-of-range memory addresses associated with io_base
- Provide missing export helpers
- Fix remap bulk read optimisation fallout
- Fix memory leak issues in error paths"
* tag 'mfd-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (88 commits)
dt-bindings: mfd: ti,j721e-system-controller: Add SoC chip ID
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: mfd: qcom,spmi-pmic: Document flash LED controller
dt-bindings: mfd: x-powers,axp152: Document the AXP15060 variant
mfd: axp20x: Add support for AXP15060 PMIC
dt-bindings: mfd: x-powers,axp152: Document the AXP313a variant
counter: rz-mtu3-cnt: Unlock on error in rz_mtu3_count_ceiling_write()
dt-bindings: mfd: dlg,da9063: Document voltage monitoring
dt-bindings: mfd: stm32: Remove unnecessary blank lines
dt-bindings: mfd: qcom,spmi-pmic: Use generic ADC node name in examples
dt-bindings: mfd: syscon: Add nuvoton,ma35d1-sys compatible
MAINTAINERS: Add entries for Renesas RZ/G2L MTU3a counter driver
counter: Add Renesas RZ/G2L MTU3a counter driver
Documentation: ABI: sysfs-bus-counter: add cascade_counts_enable and external_input_phase_clock_select
mfd: Add Renesas RZ/G2L MTU3a core driver
dt-bindings: timer: Document RZ/G2L MTU3a bindings
mfd: rsmu_i2c: Convert to i2c's .probe_new() again
mfd: intel-lpss: Add Intel Meteor Lake PCH-S LPSS PCI IDs
mfd: dln2: Fix memory leak in dln2_probe()
mfd: axp20x: Fix axp288 writable-ranges
...
Pull LED updates from Lee Jones:
"New Drivers:
- Add support for MediaTek MT6370 LED Indicator
- Add support for MediaTek MT6370 Flashlight
- Add support for QCOM PMIC Flash
- Add support for Rohm BD2606MVV Charge Pump LED
New Device Support:
- Add support for PMK8550 PWM to QCOM LPG
New Functionality:
- Add support for high resolution PWM to QCOM LPG
Fix-ups:
- Kconfig 'depends' and 'select' dependency changes
- Remove unused / irrelevant includes
- Remove unnecessary checks (already performed further into the call stack)
- Trivial: Fix commentary, simplify error messages
- Rid 'defined but not used' warnings
- Provide documentation
- Explicitly provide include files
Bug Fixes:
- Mark GPIO LED as BROKEN
- Fix Kconfig entries
- Fix various Smatch staticify reports
- Fix error handling (or a lack there of)"
* tag 'leds-next-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (30 commits)
leds: bd2606mvv: Driver for the Rohm 6 Channel i2c LED driver
dt-bindings: leds: Add ROHM BD2606MVV LED
docs: leds: ledtrig-oneshot: Fix spelling mistake
leds: pwm-multicolor: Simplify an error message
dt-bindings: leds: Convert PCA9532 to dtschema
leds: rgb: leds-qcom-lpg: Add support for PMK8550 PWM
leds: rgb: leds-qcom-lpg: Add support for high resolution PWM
dt-bindings: leds-qcom-lpg: Add qcom,pmk8550-pwm compatible string
leds: tca6507: Fix error handling of using fwnode_property_read_string
leds: flash: Set variables mvflash_{3,4}ch_regs storage-class-specifier to static
leds: rgb: mt6370: Correct config name to select in LEDS_MT6370_RGB
MAINTAINERS: Add entry for LED devices documentation
Documentation: leds: MT6370: Use bullet lists for timing variables
Documentation: leds: mt6370: Properly wrap hw_pattern chart
Documentation: leds: Add MT6370 doc to the toctree
leds: rgb: mt6370: Fix implicit declaration for FIELD_GET
docs: leds: Add MT6370 RGB LED pattern document
leds: flash: mt6370: Add MediaTek MT6370 flashlight support
leds: rgb: mt6370: Add MediaTek MT6370 current sink type LED Indicator support
dt-bindings: leds: spmi-flash-led: Add pm6150l compatible
...
afs_read_dir fetches an amount of data that's based on what the inode
size is thought to be. If the file on the server is larger than what
was fetched, the code rechecks i_size and retries. If the local i_size
was not properly updated, this can lead to an endless loop of fetching
i_size from the server and noticing each time that the size is larger on
the server.
If it is known that the remote size is larger than i_size, bump up the
fetch size to that size.
Fixes: f3ddee8dc4 ("afs: Fix directory handling")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Fix afs_getattr() to report the server's idea of the file size of a
directory rather than the local size. The local size may differ as we edit
the local copy to avoid having to redownload it and we may end up with a
differently structured blob of a different size.
However, if the directory is discarded from the pagecache we then download
it again and the user may see the directory file size apparently change.
Fixes: 63a4681ff3 ("afs: Locally edit directory data for mkdir/create/unlink/...")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
If the data version returned from the server is larger than expected,
the local data is invalidated, but we may still want to note the remote
file size.
Since we're setting change_size, we have to also set data_changed
for the i_size to get updated.
Fixes: 3f4aa98181 ("afs: Fix EOF corruption")
Signed-off-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
TCP_Server_Info::hostname may be updated once or many times during
reconnect, so protect its access outside reconnect path as well and
then prevent any potential use-after-free bugs.
Cc: stable@vger.kernel.org
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Print full device name (UNC + optional prefix) from @old_ctx->source
when printing info about mount.
Before patch
mount.cifs //srv/share/dir /mnt -o ...
dmesg
...
CIFS: Attempting to mount \\srv\share
After patch
mount.cifs //srv/share/dir /mnt -o ...
dmesg
...
CIFS: Attempting to mount //srv/share/dir
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
The name lengths were incorrect for two create contexts.
SMB2_CREATE_APP_INSTANCE_ID
SMB2_CREATE_APP_INSTANCE_VERSION
Update the definitions for these two to match the protocol specs.
Acked-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Currently, the .got section is placed within the output section .text.
However, when .got is non-empty, the SHF_WRITE flag is set for .text
when linked by lld. GNU ld recognizes .text as a special section and
ignores the SHF_WRITE flag. By renaming .text, we can also get the
SHF_WRITE flag.
The kernel has performed R_AARCH64_RELATIVE resolving very early, and can
then assume that .got is read-only. Let's move .got to the vmlinux_rodata
pseudo-segment.
As Ard Biesheuvel notes:
"This matters to consumers of the vmlinux ELF representation of the
kernel image, such as syzkaller, which disregards writable PT_LOAD
segments when resolving code symbols. The kernel itself does not care
about this distinction, but given that the GOT contains data and not
code, it does not require executable permissions, and therefore does
not belong in .text to begin with."
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Fangrui Song <maskray@google.com>
Link: https://lore.kernel.org/r/20230502074105.1541926-1-maskray@google.com
Signed-off-by: Will Deacon <will@kernel.org>
commit d54170812e ("arm64: fix .idmap.text assertion for large kernels")
modified some of the section assembler directives that declare
.idmap.text to be SHF_ALLOC instead of
SHF_ALLOC|SHF_WRITE|SHF_EXECINSTR.
This patch fixes up the remaining stragglers that were left behind. Add
Fixes tag so that this doesn't precede related change in stable.
Fixes: d54170812e ("arm64: fix .idmap.text assertion for large kernels")
Reported-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230428-awx-v2-1-b197ffa16edc@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Before this, the raw ip is printed for non-callchain and dso offset for
callchain. This inconsistent output for address may confuse people. And
mostly what we expect is the raw ip.
'dso offset' is printed in callchain:
$ perf script
...
ls 1341034 2739463.008343: 2162417 cycles:
ffffffff99d657a7 [unknown] ([unknown])
ffffffff99e00b67 [unknown] ([unknown])
235d3 memset+0x53 (/usr/lib/x86_64-linux-gnu/ld-2.31.so) # dso offset
a61b _dl_map_object+0x1bb (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
raw ip is printed for non-callchain:
$ perf script -G
...
ls 1341034 2739463.008876: 2053304 cycles: ffffffffc1596923 [unknown] ([unknown])
ls 1341034 2739463.009381: 1917049 cycles: 14def8e149e6 __strcoll_l+0xd96 (/usr/lib/x86_64-linux-gnu/libc-2.31.so) # raw ip
Let's have consistent output for it. Later I'll add a new field 'dsoff' to
print dso offset.
Signed-off-by: Changbin Du <changbin.du@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Hui Wang <hw.huiwang@huawei.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20230418031825.1262579-2-changbin.du@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Checking the config via ifdef incorrectly compiles out the report
functions when CRYPTO_USER is set to =m. Fix it by using IS_ENABLED()
instead.
Fixes: c0f9e01dd2 ("crypto: api - Check CRYPTO_USER instead of NET for report")
Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
Fixes: 63a759694e ("debugobject: Prevent init race with static objects")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx
Automation complains:
warning: symbol '__pcpu_scope_misaligned_access_speed' was not declared. Should it be static?
cpufeature.c doesn't actually include the header of the same name, as it
had not previously used anything from it.
The per-cpu variable is declared there, so include it to silence the
complaints.
Fixes: 62a31d6e38 ("RISC-V: hwprobe: Support probing of misaligned access performance")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Evan Green <evan@rivosinc.com>
Link: https://lore.kernel.org/r/20230420-wound-gizzard-2b2b589d9bea@spud
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Pull input updates from Dmitry Torokhov:
- a new driver for Novatek touch controllers
- a new driver for power button for NXP BBNSM
- a skeleton KUnit tests for the input core
- improvements to Xpad game controller driver to support more devices
- improvements to edt-ft5x06, hideep and other drivers
* tag 'input-for-v6.4-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (42 commits)
Revert "Input: xpad - fix support for some third-party controllers"
dt-bindings: input: pwm-beeper: convert to dt schema
Input: xpad - fix PowerA EnWired Controller guide button
Input: xpad - add constants for GIP interface numbers
Input: synaptics-rmi4 - fix function name in kerneldoc
Input: raspberrypi-ts - fix refcount leak in rpi_ts_probe
Input: edt-ft5x06 - select REGMAP_I2C
Input: melfas_mip4 - report palm touches
Input: cma3000_d0x - remove unneeded code
Input: edt-ft5x06 - calculate points data length only once
Input: edt-ft5x06 - unify the crc check
Input: edt-ft5x06 - convert to use regmap API
Input: edt-ft5x06 - don't print error messages with dev_dbg()
Input: edt-ft5x06 - remove code duplication
Input: edt-ft5x06 - don't recalculate the CRC
Input: edt-ft5x06 - add spaces to ensure format specification
Input: edt-ft5x06 - remove unnecessary blank lines
Input: edt-ft5x06 - fix indentation
Input: tsc2007 - enable cansleep pendown GPIO
Input: Add KUnit tests for some of the input core helper functions
...
The recent introduction of relocatable kernels prepared the move of
.rela.dyn to the init section, but actually forgot to do so, so do it
here.
Before this patch: "Freeing unused kernel image (initmem) memory: 2592K"
After this patch: "Freeing unused kernel image (initmem) memory: 6288K"
The difference corresponds to the size of the .rela.dyn section:
"[42] .rela.dyn RELA ffffffff8197e798 0127f798
000000000039c660 0000000000000018 A 47 0 8"
Fixes: 559d1e45a1 ("riscv: Use --emit-relocs in order to move .rela.dyn in init")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230428120932.22735-1-alexghiti@rivosinc.com
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
The dt-binding was defined before the extraction of csr access and
fence.i into their own extensions, and thus the presence of the I
base extension implies Zicsr and Zifencei.
There's no harm in adding them obviously, but for backwards
compatibility with DTs that existed prior to that extraction, software
is unable to differentiate between "i" and "i_zicsr_zifencei" without
any further information.
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230427-fence-blurred-c92fb69d4137@wendy
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
