The new structure is needed to make the fwlog code a library. A goal is
to drop ice_hw structure in all fwlog related functions calls.
Pass a ice_fwlog pointer across fwlog functions and use it wherever it
is possible.
Still use &hw->fwlog in debugfs code as it needs changing the value
being passed in priv. It will be done in one of the next patches.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Change the function prototype to receive hw structure instead of pf to
simplify the call. Instead of passing whole event pass only msg_buf
pointer and length.
Make ice_fwlog_ring_full() static as it isn't called from any other
context.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
ice_fwlog_supported(), ice_fwlog_get() and ice_fwlog_supported() aren't
called outside the ice_fwlog.c file. Make it static and move in the file
to allow clean build.
Drop ice_fwlog_get(). It is called only from ice_fwlog_init() function
where the fwlog support is already checked. There is no need to check it
again, call ice_aq_fwlog_get() instead.
Drop no longer valid comment from ice_fwlog_get_supported().
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
xdp_update_skb_shared_info() needs to update skb state which
was maintained in xdp_buff / frame. Pass full flags into it,
instead of breaking it out bit by bit. We will need to add
a bit for unreadable frags (even tho XDP doesn't support
those the driver paths may be common), at which point almost
all call sites would become:
xdp_update_skb_shared_info(skb, num_frags,
sinfo->xdp_frags_size,
MY_PAGE_SIZE * num_frags,
xdp_buff_is_frag_pfmemalloc(xdp),
xdp_buff_is_frag_unreadable(xdp));
Keep a helper for accessing the flags, in case we need to
transform them somehow in the future (e.g. to cover up xdp_buff
vs xdp_frame differences).
While we are touching call callers - rename the helper to
xdp_update_skb_frags_info(), previous name may have implied that
it's shinfo that's updated. We are updating flags in struct sk_buff
based on frags that got attched.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Jesper Dangaard Brouer <hawk@kernel.org>
Link: https://patch.msgid.link/20250905221539.2930285-2-kuba@kernel.org
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The 88e1510 PHY has an erratum where the phy downshift counter is not
cleared after phy being suspended(BMCR_PDOWN set) and then later
resumed(BMCR_PDOWN cleared). This can cause the gigabit link to
intermittently downshift to a lower speed.
Disabling and re-enabling the downshift feature clears the counter,
allowing the PHY to retry gigabit link negotiation up to the programmed
retry count times before downshifting. This behavior has been observed
on copper links.
Signed-off-by: Rohan G Thomas <rohan.g.thomas@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250906-marvell_fix-v2-1-f6efb286937f@altera.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This ethtool counter is meant to help with observing how many times the
congestion event was triggered but on query there was no state change.
This would help to indicate when a work item was scheduled to run too
late and in the meantime the congestion state changed back to previous
state.
While at it, do a driveby typo fix in documentation for
pci_bw_inbound_high.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1757237976-531416-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devices support both symmetric (same value for all PFs) and
asymmetric, while others only support symmetric configuration. This
implementation prefers asymmetric, since it is closer to the devlink
model (per function settings), but falls back to symmetric when needed.
Example usage:
devlink dev param set pci/0000:01:00.0 name total_vfs value <u16> cmode permanent
devlink dev reload pci/0000:01:00.0 action fw_activate
echo 1 >/sys/bus/pci/devices/0000:01:00.0/remove
echo 1 >/sys/bus/pci/rescan
cat /sys/bus/pci/devices/0000:01:00.0/sriov_totalvfs
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selects which algorithm should be used by the NIC in order to decide rate of
CQE compression dependeng on PCIe bus conditions.
Supported values:
1) balanced, merges fewer CQEs, resulting in a moderate compression ratio
but maintaining a balance between bandwidth savings and performance
2) aggressive, merges more CQEs into a single entry, achieving a higher
compression rate and maximizing performance, particularly under high
traffic loads.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
idpf: add XDP support
Alexander Lobakin says:
Add XDP support (w/o XSk for now) to the idpf driver using the libeth_xdp
sublib. All possible verdicts, .ndo_xdp_xmit(), multi-buffer etc. are here.
In general, nothing outstanding comparing to ice, except performance --
let's say, up to 2x for .ndo_xdp_xmit() on certain platforms and
scenarios.
idpf doesn't support VLAN Rx offload, so only the hash hint is
available for now.
Patches 1-7 are prereqs, without which XDP would either not work at all
or work slower/worse/...
* '200GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
idpf: add XDP RSS hash hint
idpf: add support for .ndo_xdp_xmit()
idpf: add support for XDP on Rx
idpf: use generic functions to build xdp_buff and skb
idpf: implement XDP_SETUP_PROG in ndo_bpf for splitq
idpf: prepare structures to support XDP
idpf: add support for nointerrupt queues
idpf: remove SW marker handling from NAPI
idpf: add 4-byte completion descriptor definition
idpf: link NAPIs to queues
idpf: use a saner limit for default number of queues to allocate
idpf: fix Rx descriptor ready check barrier in splitq
xdp, libeth: make the xdp_init_buff() micro-optimization generic
====================
Link: https://patch.msgid.link/20250908195748.1707057-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
first_remote_rcu() can return NULL if the FDB entry points to an FDB
nexthop group instead of a remote destination. However, unlike other
users of first_remote_rcu(), NPD cannot currently happen in
vxlan_fdb_find_uc() as it is only invoked by one driver which vetoes the
creation of FDB nexthops.
Make the function more robust by making sure the remote destination is
only dereferenced if it is not NULL.
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Wang Liang <wangliang74@huawei.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250908075141.125087-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use two separate static variables instead of the struct, this allows
to simplify the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Factor out the functionality to search for a fixed_phy matching an
address. This improves readability of the code.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the recent removal of gpio support member no_carrier isn't
needed any longer.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The two callers of __fixed_phy_add() both pass PHY_POLL, so we can
remove the irq argument to simplify the function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new ad_select policy 'port_priority' that uses the per-port
actor priority values (set via ad_actor_port_prio) to determine
aggregator selection.
This allows administrators to influence which ports are preferred
for aggregation by assigning different priority values, providing
more flexible load balancing control in LACP configurations.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a new netlink attribute 'actor_port_prio' to allow setting
the LACP actor port priority on a per-slave basis. This extends the
existing bonding infrastructure to support more granular control over
LACP negotiations.
The priority value is embedded in LACPDU packets and will be used by
subsequent patches to influence aggregator selection policies.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
All the readl_poll_timeout()s follow the same pattern - test a register
for a bit being clear every 100us, and timeout after 10ms returning
-EBUSY. Wrap this up into a function to avoid duplicating this.
This slightly changes the return value for stmmac_mdio_write() if the
second readl_poll_timeout() fails - rather than returning -ETIMEDOUT
we return -EBUSY matching the stmmac_mdio_read() behaviour.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Mohd Ayaan Anwar <quic_mohdayaa@quicinc.com>
Link: https://patch.msgid.link/E1uu8nx-00000001voa-0tJ0@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add &xdp_metadata_ops with a callback to get RSS hash hint from the
descriptor. Declare the splitq 32-byte descriptor as 4 u64s to parse
them more efficiently when possible.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use libeth XDP infra to implement .ndo_xdp_xmit() in idpf.
The Tx callbacks are reused from XDP_TX code. XDP redirect target
feature is set/cleared depending on the XDP prog presence, as for now
we still don't allocate XDP Tx queues when there's no program.
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use libeth XDP infra to support running XDP program on Rx polling.
This includes all of the possible verdicts/actions.
XDP Tx queues are cleaned only in "lazy" mode when there are less than
1/4 free descriptors left on the ring. libeth helper macros to define
driver-specific XDP functions make sure the compiler could uninline
them when needed.
Use __LIBETH_WORD_ACCESS to parse descriptors more efficiently when
applicable. It really gives some good boosts and code size reduction
on x86_64:
XDP only: add/remove: 0/0 grow/shrink: 3/3 up/down: 5/-59 (-54)
with XSk: add/remove: 0/0 grow/shrink: 5/6 up/down: 23/-124 (-101)
with the most demanding workloads like XSk xmit differing in up to 5-8%.
Co-developed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation of XDP support, move from having skb as the main frame
container during the Rx polling to &xdp_buff.
This allows to use generic and libeth helpers for building an XDP
buffer and changes the logics: now we try to allocate an skb only
when we processed all the descriptors related to the frame.
Store &libeth_xdp_stash instead of the skb pointer on the Rx queue.
It's only 8 bytes wider, but contains everything we may need.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Implement loading/removing XDP program using .ndo_bpf callback
in the split queue mode. Reconfigure and restart the queues if needed
(!!old_prog != !!new_prog), otherwise, just update the pointers.
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Extend basic structures of the driver (e.g. 'idpf_vport', 'idpf_*_queue',
'idpf_vport_user_config_data') by adding members necessary to support XDP.
Add extra XDP Tx queues needed to support XDP_TX and XDP_REDIRECT actions
without interfering with regular Tx traffic.
Also add functions dedicated to support XDP initialization for Rx and
Tx queues and call those functions from the existing algorithms of
queues configuration.
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Co-developed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, queues are associated 1:1 with interrupt vectors as it's
assumed queues are always interrupt-driven. For XDP, we want to use
Tx queues without interrupts and only do "lazy" cleaning when the number
of free elements is <= threshold (closest pow-2 to 1/4 of the ring).
In order to use a queue without an interrupt, idpf still needs to have
a vector assigned to it to flush descriptors. This vector can be global
and only one for the whole vport to handle all its noirq queues.
Always request one excessive vector and configure it in non-interrupt
mode right away when creating vport, so that it can be used later by
queues when needed (not only XDP ones).
Co-developed-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
SW marker descriptors on completion queues are used only when a queue
is about to be destroyed. It's far from hotpath and handling it in the
hotpath NAPI poll makes no sense.
Instead, run a simple poller after a virtchnl message for destroying
the queue is sent and wait for the replies. If replies for all of the
queues are received, this means the synchronization is done correctly
and we can go forth with stopping the link.
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In the queue-based scheduling mode, Tx completion descriptor is 4 bytes
comparing to 8 bytes in flow-based.
Add definition for it and allocate the corresponding amount of memory
for the descriptors during the completion queue creation.
This does not include handling 4-byte completions during Tx polling, as
for now, the only user of QB will be XDP, which has its own routines.
Signed-off-by: Michal Kubiak <michal.kubiak@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Add the missing linking of NAPIs to netdev queues when enabling
interrupt vectors in order to support NAPI configuration and
interfaces requiring get_rx_queue()->napi to be set (like XSk
busy polling).
As currently, idpf_vport_{start,stop}() is called from several flows
with inconsistent RTNL locking, we need to synchronize them to avoid
runtime assertions. Notably:
* idpf_{open,stop}() -- regular NDOs, RTNL is always taken;
* idpf_initiate_soft_reset() -- usually called under RTNL;
* idpf_init_task -- called from the init work, needs RTNL;
* idpf_vport_dealloc -- called without RTNL taken, needs it.
Expand common idpf_vport_{start,stop}() to take an additional bool
telling whether we need to manually take the RTNL lock.
Suggested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # helper
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the maximum number of queues available for one vport is 16.
This is hardcoded, but then the function calculating the optimal number
of queues takes min(16, num_online_cpus()).
In order to be able to allocate more queues, which will be then used for
XDP, stop hardcoding 16 and rely on what the device gives us[*]. Instead
of num_online_cpus(), which is considered suboptimal since at least 2013,
use netif_get_num_default_rss_queues() to still have free queues in the
pool.
[*] With the note:
Currently, idpf always allocates `IDPF_MAX_BUFQS_PER_RXQ_GRP` (== 2)
buffer queues for each Rx queue and one completion queue for each Tx for
best performance. But there was no check whether such number is available,
IOW the assumption was not backed by any "harmonizing" / actual checks.
Fix this while at it.
nr_cpu_ids number of Tx queues are needed only for lockless XDP sending,
the regular stack doesn't benefit from that anyhow.
On a 128-thread Xeon, this now gives me 32 regular Tx queues and leaves
224 free for XDP (128 of which will handle XDP_TX, .ndo_xdp_xmit(), and
XSk xmit when enabled).
Note 2:
Unfortunately, some CP/FW versions are not able to
reconfigure/enable/disable large amount of queues within the minimum
timeout (2 seconds). For now, fall back to the default timeout for
every operation until this is resolved.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
No idea what the current barrier position was meant for. At that point,
nothing is read from the descriptor, only the pointer to the actual one
is fetched.
The correct barrier usage here is after the generation check, so that
only the first qword is read if the descriptor is not yet ready and we
need to stop polling. Debatable on coherent DMA as the Rx descriptor
size is <= cacheline size, but anyway, the current barrier position
only makes the codegen worse.
Fixes: 3a8845af66 ("idpf: add RX splitq napi poll support")
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Tested-by: Ramu R <ramu.r@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
