This ethtool counter is meant to help with observing how many times the
congestion event was triggered but on query there was no state change.
This would help to indicate when a work item was scheduled to run too
late and in the meantime the congestion state changed back to previous
state.
While at it, do a driveby typo fix in documentation for
pci_bw_inbound_high.
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1757237976-531416-3-git-send-email-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some devices support both symmetric (same value for all PFs) and
asymmetric, while others only support symmetric configuration. This
implementation prefers asymmetric, since it is closer to the devlink
model (per function settings), but falls back to symmetric when needed.
Example usage:
devlink dev param set pci/0000:01:00.0 name total_vfs value <u16> cmode permanent
devlink dev reload pci/0000:01:00.0 action fw_activate
echo 1 >/sys/bus/pci/devices/0000:01:00.0/remove
echo 1 >/sys/bus/pci/rescan
cat /sys/bus/pci/devices/0000:01:00.0/sriov_totalvfs
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selects which algorithm should be used by the NIC in order to decide rate of
CQE compression dependeng on PCIe bus conditions.
Supported values:
1) balanced, merges fewer CQEs, resulting in a moderate compression ratio
but maintaining a balance between bandwidth savings and performance
2) aggressive, merges more CQEs into a single entry, achieving a higher
compression rate and maximizing performance, particularly under high
traffic loads.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-3-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
NICs are typically configured with total_vfs=0, forcing users to rely
on external tools to enable SR-IOV (a widely used and essential feature).
Add total_vfs parameter to devlink for SR-IOV max VF configurability.
Enables standard kernel tools to manage SR-IOV, addressing the need for
flexible VF configuration.
Signed-off-by: Vlad Dumitrescu <vdumitrescu@nvidia.com>
Tested-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250907012953.301746-2-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently the ADD_ADDR option is retransmitted with a fixed timeout. This
patch makes the retransmission timeout adaptive by using the maximum RTO
among all the subflows, while still capping it at the configured maximum
value (add_addr_timeout_max). This improves responsiveness when
establishing new subflows.
Specifically:
1. Adds mptcp_adjust_add_addr_timeout() helper to compute the adaptive
timeout.
2. Uses maximum subflow RTO (icsk_rto) when available.
3. Applies exponential backoff based on retransmission count.
4. Maintains fallback to configured max timeout when no RTO data exists.
This slightly changes the behaviour of the MPTCP "add_addr_timeout"
sysctl knob to be used as a maximum instead of a fixed value. But this
is seen as an improvement: the ADD_ADDR might be sent quicker than
before to improve the overall MPTCP connection. Also, the default
value is set to 2 min, which was already way too long, and caused the
ADD_ADDR not to be retransmitted for connections shorter than 2 minutes.
Suggested-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/576
Reviewed-by: Christoph Paasch <cpaasch@openai.com>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250907-net-next-mptcp-add_addr-retrans-adapt-v1-1-824cc805772b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a new ad_select policy 'port_priority' that uses the per-port
actor priority values (set via ad_actor_port_prio) to determine
aggregator selection.
This allows administrators to influence which ports are preferred
for aggregation by assigning different priority values, providing
more flexible load balancing control in LACP configurations.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-3-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Introduce a new netlink attribute 'actor_port_prio' to allow setting
the LACP actor port priority on a per-slave basis. This extends the
existing bonding infrastructure to support more granular control over
LACP negotiations.
The priority value is embedded in LACPDU packets and will be used by
subsequent patches to influence aggregator selection policies.
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20250902064501.360822-2-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and Bluetooth.
We're reverting the removal of a Sundance driver, a user has appeared.
This makes the PR rather large in terms of LoC.
There's a conspicuous absence of real, user-reported 6.17 issues.
Slightly worried that the summer distracted people from testing.
Previous releases - regressions:
- ax25: properly unshare skbs in ax25_kiss_rcv()
Previous releases - always broken:
- phylink: disable autoneg for interfaces that have no inband, fix
regression on pcs-lynx (NXP LS1088)
- vxlan: fix null-deref when using nexthop objects
- batman-adv: fix OOB read/write in network-coding decode
- icmp: icmp_ndo_send: fix reversing address translation for replies
- tcp: fix socket ref leak in TCP-AO failure handling for IPv6
- mctp:
- mctp_fraq_queue should take ownership of passed skb
- usb: initialise mac header in RX path, avoid WARN
- wifi: mac80211: do not permit 40 MHz EHT operation on 5/6 GHz,
respect device limitations
- wifi: wilc1000: avoid buffer overflow in WID string configuration
- wifi: mt76:
- fix regressions from mt7996 MLO support rework
- fix offchannel handling issues on mt7996
- fix multiple wcid linked list corruption issues
- mt7921: don't disconnect when AP requests switch to a channel
which requires radar detection
- mt7925u: use connac3 tx aggr check in tx complete
- wifi: intel:
- improve validation of ACPI DSM data
- cfg: restore some 1000 series configs
- wifi: ath:
- ath11k: a fix for GTK rekeying
- ath12k: a missed WiFi7 capability (multi-link EMLSR)
- eth: intel:
- ice: fix races in "low latency" firmware interface for Tx timestamps
- idpf: set mac type when adding and removing MAC filters
- i40e: remove racy read access to some debugfs files
Misc:
- Revert "eth: remove the DLink/Sundance (ST201) driver"
- netfilter: conntrack: helper: Replace -EEXIST by -EBUSY, avoid
confusing modprobe"
* tag 'net-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (99 commits)
phy: mscc: Stop taking ts_lock for tx_queue and use its own lock
selftest: net: Fix weird setsockopt() in bind_bhash.c.
MAINTAINERS: add Sabrina to TLS maintainers
gve: update MAINTAINERS
ppp: fix memory leak in pad_compress_skb
net: xilinx: axienet: Add error handling for RX metadata pointer retrieval
net: atm: fix memory leak in atm_register_sysfs when device_register fail
netfilter: nf_tables: Introduce NFTA_DEVICE_PREFIX
selftests: netfilter: fix udpclash tool hang
ax25: properly unshare skbs in ax25_kiss_rcv()
mctp: return -ENOPROTOOPT for unknown getsockopt options
net/smc: Remove validation of reserved bits in CLC Decline message
ipv4: Fix NULL vs error pointer check in inet_blackhole_dev_init()
net: thunder_bgx: decrement cleanup index before use
net: thunder_bgx: add a missing of_node_put
net: phylink: move PHY interrupt request to non-fail path
net: lockless sock_i_ino()
tools: ynl-gen: fix nested array counting
wifi: wilc1000: avoid buffer overflow in WID string configuration
wifi: cfg80211: sme: cap SSID length in __cfg80211_connect_result()
...
While updating the binary min-len implementation, I noticed that
the only user, should AFAICT be using exact-len instead.
In net/ipv4/fou_core.c FOU_ATTR_LOCAL_V6 and FOU_ATTR_PEER_V6
are only used for singular IPv6 addresses, and there are AFAICT
no known implementations trying to send more, it therefore
appears safe to change it to an exact-len policy.
This patch therefore changes the local-v6/peer-v6 attributes to
use an exact-len check, instead of a min-len check.
Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250902154640.759815-2-ast@fiberby.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remove the implementation of use_carrier, the link monitoring
method that utilizes ethtool or ioctl to determine the link state of an
interface in a bond. Bonding will always behaves as if use_carrier=1,
which relies on netif_carrier_ok() to determine the link state of
interfaces.
To avoid acquiring RTNL many times per second, bonding inspects
link state under RCU, but not under RTNL. However, ethtool
implementations in drivers may sleep, and therefore this strategy is
unsuitable for use with calls into driver ethtool functions.
The use_carrier option was introduced in 2003, to provide
backwards compatibility for network device drivers that did not support
the then-new netif_carrier_ok/on/off system. Device drivers are now
expected to support netif_carrier_*, and the use_carrier backwards
compatibility logic is no longer necessary.
The option itself remains, but when queried always returns 1,
and may only be set to 1.
Link: https://lore.kernel.org/000000000000eb54bf061cfd666a@google.com
Link: https://lore.kernel.org/20240718122017.d2e33aaac43a.I10ab9c9ded97163aef4e4de10985cd8f7de60d28@changeid
Signed-off-by: Jay Vosburgh <jv@jvosburgh.net>
Reported-by: syzbot+b8c48ea38ca27d150063@syzkaller.appspotmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/2029487.1756512517@famine
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull sound fixes from Takashi Iwai:
"A collection of small changes including a few regression fixes:
- Regression fix for Intel SKL/KBL HD-audio bindings
- Regression fix for missing Nvidia HDMI codec entries after the
recent code reorganization
- A few TAS2781 codec regression fixes
- Fix for ASoC component lookup breakage
- Usual HD-audio, USB-audio and SOF quirk entries"
* tag 'sound-6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/hdmi: Add pin fix for another HP EliteDesk 800 G4 model
ALSA: usb-audio: Allow Focusrite devices to use low samplerates
ALSA: hda: tas2781: reorder tas2563 calibration variables
ALSA: hda: tas2781: fix tas2563 EFI data endianness
ALSA: firewire-motu: drop EPOLLOUT from poll return values as write is not supported
ALSA: docs: Add documents for recently changes in snd-usb-audio
ALSA: usb-audio: Add mute TLV for playback volumes on more devices
ASoC: SOF: Intel: WCL: Add the sdw_process_wakeen op
ALSA: hda: Avoid binding with SOF for SKL/KBL platforms
ASoC: rsnd: tidyup direction name on rsnd_dai_connect()
ALSA: hda/tas2781: Fix EFI name for calibration beginning with 1 instead of 0
ALSA: usb-audio: move mixer_quirks' min_mute into common quirk
ALSA: hda/realtek: Fix headset mic for TongFang X6[AF]R5xxY
ALSA: hda/hdmi: Restore missing HDMI codec entries
ASoC: codecs: idt821034: fix wrong log in idt821034_chip_direction_output()
ASoC: soc-core: tidyup snd_soc_lookup_component_nolocked()
ASoC: soc-core: care NULL dirver name on snd_soc_lookup_component_nolocked()
ALSA: hda: intel-dsp-config: Select SOF driver on MTL Chromebooks
ALSA: usb-audio: Add mute TLV for playback volumes on some devices
For some Ethernet controllers, the PTP timer function is not integrated.
Instead, the PTP timer is a separate device and provides PTP Hardware
Clock (PHC) to the Ethernet controller to use, such as NXP FMan MAC,
ENETC, etc. Therefore, a property is needed to indicate this hardware
relationship between the Ethernet controller and the PTP timer.
Since this use case is also very common, it is better to add a generic
property to ethernet-controller.yaml. According to the existing binding
docs, there are two good candidates, one is the "ptp-timer" defined in
fsl,fman-dtsec.yaml, and the other is the "ptimer-handle" defined in
fsl,fman.yaml. From the perspective of the name, the former is more
straightforward, so move the "ptp-timer" from fsl,fman-dtsec.yaml to
ethernet-controller.yaml.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250829050615.1247468-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
NXP NETC (Ethernet Controller) is a multi-function PCIe Root Complex
Integrated Endpoint (RCiEP), the Timer is one of its functions which
provides current time with nanosecond resolution, precise periodic
pulse, pulse on timeout (alarm), and time capture on external pulse
support. And also supports time synchronization as required for IEEE
1588 and IEEE 802.1AS-2020. So add device tree binding doc for the PTP
clock based on NETC Timer.
NETC Timer has three reference clock sources, but the clock mux is inside
the IP. Therefore, the driver will parse the clock name to select the
desired clock source. If the clocks property is not present, NETC Timer
will use the system clock of NETC IP as its reference clock. Because the
Timer is a PCIe function of NETC IP, the system clock of NETC is always
available to the Timer.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250829050615.1247468-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 2677010e77 ("Add support to set NAPI threaded for individual
NAPI") introduced threaded NAPI configuration per individual NAPI
instance, however obsolete description that threaded NAPI is per device
has remained.
Remove the old description and clarify that only NAPI instances running
in threaded mode spawn kernel threads by changing "Each NAPI instance"
to "Each threaded NAPI instance".
Signed-off-by: Kohei Enju <enjuk@amazon.com>
Reviewed-by: Samiullah Khawaja <skhawaja@google.com>
Link: https://patch.msgid.link/20250829064857.51503-1-enjuk@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull x86 fixes from Borislav Petkov:
- Convert the SSB mitigation to the attack vector controls which got
forgotten at the time
- Prevent the CPUID topology hierarchy detection on AMD from
overwriting the correct initial APIC ID
- Fix the case of a machine shipping without microcode in the BIOS, in
the AMD microcode loader
- Correct the Pentium 4 model range which has a constant TSC
* tag 'x86_urgent_for_v6.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bugs: Add attack vector controls for SSB
x86/cpu/topology: Use initial APIC ID from XTOPOLOGY leaf on AMD/HYGON
x86/microcode/AMD: Handle the case of no BIOS microcode
x86/cpu/intel: Fix the constant_tsc model check for Pentium 4
Cross-merge networking fixes after downstream PR (net-6.17-rc4).
No conflicts.
Adjacent changes:
drivers/net/ethernet/intel/idpf/idpf_txrx.c
02614eee26 ("idpf: do not linearize big TSO packets")
6c4e684802 ("idpf: remove obsolete stashing code")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull drm fixes from Dave Airlie:
"Weekly fixes, feels a bit big.
The major piece is msm fixes, then the usual amdgpu/xe along with some
mediatek and nouveau fixes and a tegra revert.
gpuvm:
- fix some typos
xe:
- Fix user-fence race issue
- Couple xe_vm fixes
- Don't trigger rebind on initial dma-buf validation
- Fix a build issue related to basename() posix vs gnu discrepancy
amdgpu:
- pin buffers while vmapping
- UserQ fixes
- Revert CSA fix
- SR-IOV fix
nouveau:
- fix linear modifier
- remove some dead code
msm:
- Core/GPU:
- fix comment doc warning in gpuvm
- fix build with KMS disabled
- fix pgtable setup/teardown race
- global fault counter fix
- various error path fixes
- GPU devcoredump snapshot fixes
- handle in-place VM_BIND remaps to solve turnip vm update race
- skip re-emitting IBs for unusable VMs
- Don't use %pK through printk
- moved display snapshot init earlier, fixing a crash
- DPU:
- Fixed crash in virtual plane checking code
- Fixed mode comparison in virtual plane checking code
- DSI:
- Adjusted width of resulution-related registers
- Fixed locking issue on 14nm PLLs
- UBWC (per Bjorn's ack)
- Added UBWC configuration for several missing platforms (fixing
regression)
mediatek:
- Add error handling for old state CRTC in atomic_disable
- Fix DSI host and panel bridge pre-enable order
- Fix device/node reference count leaks in mtk_drm_get_all_drm_priv
- mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
tegra:
- revert dma-buf change"
* tag 'drm-fixes-2025-08-29' of https://gitlab.freedesktop.org/drm/kernel: (56 commits)
drm/mediatek: mtk_hdmi: Fix inverted parameters in some regmap_update_bits calls
drm/amdgpu/userq: fix error handling of invalid doorbell
drm/amdgpu: update firmware version checks for user queue support
drm/amd/amdgpu: disable hwmon power1_cap* for gfx 11.0.3 on vf mode
Revert "drm/amdgpu: fix incorrect vm flags to map bo"
drm/amdgpu/gfx12: set MQD as appriopriate for queue types
drm/amdgpu/gfx11: set MQD as appriopriate for queue types
drm/xe: switch to local xbasename() helper
drm/xe: Don't trigger rebind on initial dma-buf validation
drm/xe/vm: Clear the scratch_pt pointer on error
drm/xe/vm: Don't pin the vm_resv during validation
drm/xe/xe_sync: avoid race during ufence signaling
Revert "drm/tegra: Use dma_buf from GEM object instance"
soc: qcom: use no-UBWC config for MSM8956/76
soc: qcom: add configuration for MSM8929
soc: qcom: ubwc: add more missing platforms
soc: qcom: ubwc: use no-uwbc config for MSM8917
drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset
dt-bindings: display/msm: qcom,mdp5: drop lut clock
drm/gpuvm: fix various typos in .c and .h gpuvm file
...
Attack vector controls for SSB were missed in the initial attack vector series.
The default mitigation for SSB requires user-space opt-in so it is only
relevant for user->user attacks. Check with attack vector controls when
the command is auto - i.e., no explicit user selection has been done.
Fixes: 2d31d28746 ("x86/bugs: Define attack vectors relevant for each bug")
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250819192200.2003074-5-david.kaplan@amd.com
Enable configuration of the burst period — a time window starting
from the first error recovery, during which the reporter allows
recovery attempts for each reported error.
This feature is helpful when a single underlying issue causes multiple
errors, as it delays the start of the grace period to allow sufficient
time for recovering all related errors. For example, if multiple TX
queues time out simultaneously, a sufficient burst period could allow
all affected TX queues to be recovered within that window. Without this
period, only the first TX queue that reports a timeout will undergo
recovery, while the remaining TX queues will be blocked once the grace
period begins.
Configuration example:
$ devlink health set pci/0000:00:09.0 reporter tx burst_period 500
Configuration example with ynl:
./tools/net/ynl/pyynl/cli.py \
--spec Documentation/netlink/specs/devlink.yaml \
--do health-reporter-set --json '{
"bus-name": "auxiliary",
"dev-name": "mlx5_core.eth.0",
"port-index": 65535,
"health-reporter-name": "tx",
"health-reporter-burst-period": 500
}'
Signed-off-by: Shahar Shitrit <shshitrit@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Carolina Jubran <cjubran@nvidia.com>
Signed-off-by: Mark Bloch <mbloch@nvidia.com>
Link: https://patch.msgid.link/20250824084354.533182-5-mbloch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull devicetree fixes from Rob Herring:
- Fix a memory leak for of_pci_add_properties() failure case. Then fix
the introduced UAF.
- Add missing IORESOURCE_MEM flag on of_reserved_mem_region_to_resource()
- Add already in use vendor prefix "eswin"
- Clarify "of of" comment in of_match_device(). After many years of
drive-by patches dropping the 2nd "of" (which referred to
OpenFirmware), a correct patch finally arrived
* tag 'devicetree-fixes-for-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
of: dynamic: Fix use after free in of_changeset_add_prop_helper()
dt-bindings: vendor-prefixes: add eswin
of: reserved_mem: Add missing IORESOURCE_MEM flag on resources
of: dynamic: Fix memleak when of_pci_add_properties() failed
of: Clarify OF device context in of_match_device() comment
None of MDP5 platforms have a LUT clock on the display-controller, it
was added by the mistake. Drop it, fixing DT warnings on MSM8976 /
MSM8956 platforms. Technically it's an ABI break, but no other platforms
are affected.
Fixes: 385c8ac763 ("dt-bindings: display/msm: convert MDP5 schema to YAML format")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Patchwork: https://patchwork.freedesktop.org/patch/667822/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Pull driver core fixes from Danilo Krummrich:
- Fix swapped handling of lru_gen and lru_gen_full debugfs files in
vmscan
- Fix debugfs mount options (uid, gid, mode) being silently ignored
- Fix leak of devres action in the unwind path of Devres::new()
- Documentation:
- Expand and fix documentation of (outdated) Device, DeviceContext
and generic driver infrastructure
- Fix C header link of faux device abstractions
- Clarify expected interaction with the security team
- Smooth text flow in the security bug reporting process
documentation
* tag 'driver-core-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
Documentation: smooth the text flow in the security bug reporting process
Documentation: clarify the expected collaboration with security bugs reporters
debugfs: fix mount options not being applied
rust: devres: fix leaking call to devm_add_action()
rust: faux: fix C header link
driver: rust: expand documentation for driver infrastructure
device: rust: expand documentation for Device
device: rust: expand documentation for DeviceContext
mm/vmscan: fix inverted polarity in lru_gen_seq_show()
Pull iommufd fixes from Jason Gunthorpe:
"Two very minor fixes:
- Fix mismatched kvalloc()/kfree()
- Spelling fixes in documentation"
* tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd:
iommufd: Fix spelling errors in iommufd.rst
iommufd: viommu: free memory allocated by kvcalloc() using kvfree()
Pull cgroup fixes from Tejun Heo:
- Fix NULL de-ref in css_rstat_exit() which could happen after
allocation failure
- Fix a cpuset partition handling bug and a couple other misc issues
- Doc spelling fix
* tag 'cgroup-for-6.17-rc2-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
docs: cgroup: fixed spelling mistakes in documentation
cgroup: avoid null de-ref in css_rstat_exit()
cgroup/cpuset: Remove the unnecessary css_get/put() in cpuset_partition_write()
cgroup/cpuset: Fix a partition error with CPU hotplug
cgroup/cpuset: Use static_branch_enable_cpuslocked() on cpusets_insane_config_key
Pull regulator fixes from Mark Brown:
"A couple of fairly minor device specific fixes that came in over the
past week or so, plus the addition of an actual maintainer for the
IR38060"
* tag 'regulator-fix-v6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps65219: regulator: tps65219: Fix error codes in probe()
regulator: pca9450: Use devm_register_sys_off_handler
regulator: dt-bindings: infineon,ir38060: Add Guenter as maintainer from IBM
Pull networking fixes from Jakub Kicinski:
"Including fixes from Bluetooth.
Current release - fix to a fix:
- usb: asix_devices: fix PHY address mask in MDIO bus initialization
Current release - regressions:
- Bluetooth: fixes for the split between BIS_LINK and PA_LINK
- Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN
flag", breaks compatibility with some existing device tree blobs
- dsa: b53: fix reserved register access in b53_fdb_dump()
Current release - new code bugs:
- sched: dualpi2: run probability update timer in BH to avoid
deadlock
- eth: libwx: fix the size in RSS hash key population
- pse-pd: pd692x0: improve power budget error paths and handling
Previous releases - regressions:
- tls: fix handling of zero-length records on the rx_list
- hsr: reject HSR frame if skb can't hold tag
- bonding: fix negotiation flapping in 802.3ad passive mode
Previous releases - always broken:
- gso: forbid IPv6 TSO with extensions on devices with only IPV6_CSUM
- sched: make cake_enqueue return NET_XMIT_CN when past buffer_limit,
avoid packet drops with low buffer_limit, remove unnecessary WARN()
- sched: fix backlog accounting after modifying config of a qdisc in
the middle of the hierarchy
- mptcp: improve handling of skb extension allocation failures
- eth: mlx5:
- fixes for the "HW Steering" flow management method
- fixes for QoS and device buffer management"
* tag 'net-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (81 commits)
netfilter: nf_reject: don't leak dst refcount for loopback packets
net/mlx5e: Preserve shared buffer capacity during headroom updates
net/mlx5e: Query FW for buffer ownership
net/mlx5: Restore missing scheduling node cleanup on vport enable failure
net/mlx5: Fix QoS reference leak in vport enable error path
net/mlx5: Destroy vport QoS element when no configuration remains
net/mlx5e: Preserve tc-bw during parent changes
net/mlx5: Remove default QoS group and attach vports directly to root TSAR
net/mlx5: Base ECVF devlink port attrs from 0
net: pse-pd: pd692x0: Skip power budget configuration when undefined
net: pse-pd: pd692x0: Fix power budget leak in manager setup error path
Octeontx2-af: Skip overlap check for SPI field
selftests: tls: add tests for zero-length records
tls: fix handling of zero-length records on the rx_list
net: airoha: ppe: Do not invalid PPE entries in case of SW hash collision
selftests: bonding: add test for passive LACP mode
bonding: send LACPDUs periodically in passive mode after receiving partner's LACPDU
bonding: update LACP activity flag after setting lacp_active
Revert "net: cadence: macb: sama7g5_emac: Remove USARIO CLKEN flag"
ipv6: sr: Fix MAC comparison to be constant-time
...
The PPE (packet process engine) hardware block is available in Qualcomm
IPQ chipsets that support PPE architecture, such as IPQ9574. The PPE in
the IPQ9574 SoC includes six Ethernet ports (6 GMAC and 6 XGMAC), which
are used to connect with external PHY devices by PCS. It includes an L2
switch function for bridging packets among the 6 Ethernet ports and the
CPU port. The CPU port enables packet transfer between the Ethernet ports
and the ARM cores in the SoC, using the Ethernet DMA.
The PPE also includes packet processing offload capabilities for various
networking functions such as route and bridge flows, VLANs, different
tunnel protocols and VPN.
The PPE switch is modeled according to the Ethernet switch schema, with
additional properties defined for the switch node for interrupts, clocks,
resets, interconnects and Ethernet DMA. The switch port node is extended
with additional properties for clocks and resets.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://patch.msgid.link/20250818-qcom_ipq_ppe-v8-1-1d4ff641fce9@quicinc.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert SCTP cookies to use HMAC-SHA256, instead of the previous choice
of the legacy algorithms HMAC-MD5 and HMAC-SHA1. Simplify and optimize
the code by using the HMAC-SHA256 library instead of crypto_shash, and
by preparing the HMAC key when it is generated instead of per-operation.
This doesn't break compatibility, since the cookie format is an
implementation detail, not part of the SCTP protocol itself.
Note that the cookie size doesn't change either. The HMAC field was
already 32 bytes, even though previously at most 20 bytes were actually
compared. 32 bytes exactly fits an untruncated HMAC-SHA256 value. So,
although we could safely truncate the MAC to something slightly shorter,
for now just keep the cookie size the same.
I also considered SipHash, but that would generate only 8-byte MACs. An
8-byte MAC *might* suffice here. However, there's quite a lot of
information in the SCTP cookies: more than in TCP SYN cookies. So
absent an analysis that occasional forgeries of all that information is
okay in SCTP, I errored on the side of caution.
Remove HMAC-MD5 and HMAC-SHA1 as options, since the new HMAC-SHA256
option is just better. It's faster as well as more secure. For
example, benchmarking on x86_64, cookie authentication is now nearly 3x
as fast as the previous default choice and implementation of HMAC-MD5.
Also just make the kernel always support cookie authentication if SCTP
is supported at all, rather than making it optional in the build. (It
was sort of optional before, but it didn't really work properly. E.g.,
a kernel with CONFIG_SCTP_COOKIE_HMAC_MD5=n still supported HMAC-MD5
cookie authentication if CONFIG_CRYPTO_HMAC and CONFIG_CRYPTO_MD5
happened to be enabled in the kconfig for other reasons.)
Acked-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: Eric Biggers <ebiggers@kernel.org>
Link: https://patch.msgid.link/20250818205426.30222-5-ebiggers@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull vfs fixes from Christian Brauner:
- Fix two memory leaks in pidfs
- Prevent changing the idmapping of an already idmapped mount without
OPEN_TREE_CLONE through open_tree_attr()
- Don't fail listing extended attributes in kernfs when no extended
attributes are set
- Fix the return value in coredump_parse()
- Fix the error handling for unbuffered writes in netfs
- Fix broken data integrity guarantees for O_SYNC writes via iomap
- Fix UAF in __mark_inode_dirty()
- Keep inode->i_blkbits constant in fuse
- Fix coredump selftests
- Fix get_unused_fd_flags() usage in do_handle_open()
- Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES
- Fix use-after-free in bh_read()
- Fix incorrect lflags value in the move_mount() syscall
* tag 'vfs-6.17-rc3.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
signal: Fix memory leak for PIDFD_SELF* sentinels
kernfs: don't fail listing extended attributes
coredump: Fix return value in coredump_parse()
fs/buffer: fix use-after-free when call bh_read() helper
pidfs: Fix memory leak in pidfd_info()
netfs: Fix unbuffered write error handling
fhandle: do_handle_open() should get FD with user flags
module: Rename EXPORT_SYMBOL_GPL_FOR_MODULES to EXPORT_SYMBOL_FOR_MODULES
fs: fix incorrect lflags value in the move_mount syscall
selftests/coredump: Remove the read() that fails the test
fuse: keep inode->i_blkbits constant
iomap: Fix broken data integrity guarantees for O_SYNC writes
selftests/mount_setattr: add smoke tests for open_tree_attr(2) bug
open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE
fs: writeback: fix use-after-free in __mark_inode_dirty()
Add support for XDP statistics collection and reporting via rtnl_link
and netdev_queue API.
For XDP programs without frags support, fbnic requires MTU to be less
than the HDS threshold. If an over-sized frame is received, the frame
is dropped and recorded as rx_length_errors reported via ip stats to
highlight that this is an error.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20250813221319.3367670-9-mohsin.bashr@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
