We have two printk tests reading trace_pipe in non blocking way,
with the very same code. Moving that in new read_trace_pipe_iter
function.
Current read_trace_pipe is used from samples/bpf and needs to
do blocking read and printf of the trace_pipe data, using new
read_trace_pipe_iter to implement that.
Both printk tests do early checks for the number of found messages
and can bail earlier, but I did not find any speed difference w/o
that condition, so I did not complicate the change more for that.
Some of the samples/bpf programs use read_trace_pipe function,
so I kept that interface untouched. I did not see any issues with
affected samples/bpf programs other than there's slight change in
read_trace_pipe output. The current code uses puts that adds new
line after the printed string, so we would occasionally see extra
new line. With this patch we read output per lines, so there's no
need to use puts and we can use just printf instead without extra
new line.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20240410140952.292261-1-jolsa@kernel.org
When looking at Alexei's patch ([1]) which added tests for atomics,
I noticed that the tests will be skipped with cpuv4. For example,
with latest llvm19, I see:
[root@arch-fb-vm1 bpf]# ./test_progs -t arena_atomics
#3/1 arena_atomics/add:OK
...
#3/7 arena_atomics/xchg:OK
#3 arena_atomics:OK
Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED
[root@arch-fb-vm1 bpf]# ./test_progs-cpuv4 -t arena_atomics
#3 arena_atomics:SKIP
Summary: 1/0 PASSED, 1 SKIPPED, 0 FAILED
[root@arch-fb-vm1 bpf]#
It is perfectly fine to enable atomics-related tests for cpuv4.
With this patch, I have
[root@arch-fb-vm1 bpf]# ./test_progs-cpuv4 -t arena_atomics
#3/1 arena_atomics/add:OK
...
#3/7 arena_atomics/xchg:OK
#3 arena_atomics:OK
Summary: 1/7 PASSED, 0 SKIPPED, 0 FAILED
[1] https://lore.kernel.org/r/20240405231134.17274-2-alexei.starovoitov@gmail.com
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240410153326.1851055-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add bpf_link support for sk_msg and sk_skb programs. We have an
internal request to support bpf_link for sk_msg programs so user
space can have a uniform handling with bpf_link based libbpf
APIs. Using bpf_link based libbpf API also has a benefit which
makes system robust by decoupling prog life cycle and
attachment life cycle.
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240410043527.3737160-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In some cases, instead of always consuming all items from ring buffers
in a greedy way, we may want to consume up to a certain amount of items,
for example when we need to copy items from the BPF ring buffer to a
limited user buffer.
This change allows to set an upper limit to the amount of items consumed
from one or more ring buffers.
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240406092005.92399-3-andrea.righi@canonical.com
The verifier in the kernel ensures that the struct_ops operators behave
correctly by checking that they access parameters and context
appropriately. The verifier will approve a program as long as it correctly
accesses the context/parameters, regardless of its function signature. In
contrast, libbpf should not verify the signature of function pointers and
functions to enable flexibility in loading various implementations of an
operator even if the signature of the function pointer does not match those
in the implementations or the kernel.
With this flexibility, user space applications can adapt to different
kernel versions by loading a specific implementation of an operator based
on feature detection.
This is a follow-up of the commit c911fc61a7 ("libbpf: Skip zeroed or
null fields if not found in the kernel type.")
Signed-off-by: Kui-Feng Lee <thinker.li@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240404232342.991414-1-thinker.li@gmail.com
Add selftests validating that BPF verifier handles precision marking
for SCALAR registers derived from r10 (fp) register correctly.
Given `r0 = (s8)r10;` syntax is not supported by older Clang compilers,
use the raw BPF instruction syntax to maximize compatibility.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240404214536.3551295-2-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The struct bpf_fib_lookup is supposed to be of size 64. A recent commit
59b418c706 ("bpf: Add a check for struct bpf_fib_lookup size") added
a static assertion to check this property so that future changes to the
structure will not accidentally break this assumption.
As it immediately turned out, on some 32-bit arm systems, when AEABI=n,
the total size of the structure was equal to 68, see [1]. This happened
because the bpf_fib_lookup structure contains a union of two 16-bit
fields:
union {
__u16 tot_len;
__u16 mtu_result;
};
which was supposed to compile to a 16-bit-aligned 16-bit field. On the
aforementioned setups it was instead both aligned and padded to 32-bits.
Declare this inner union as __attribute__((packed, aligned(2))) such
that it always is of size 2 and is aligned to 16 bits.
[1] https://lore.kernel.org/all/CA+G9fYtsoP51f-oP_Sp5MOq-Ffv8La2RztNpwvE6+R1VtFiLrw@mail.gmail.com/#t
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: e1850ea9bd ("bpf: bpf_fib_lookup return MTU value as output when looked up")
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240403123303.1452184-1-aspsk@isovalent.com
When pinning programs/objects under PATH (eg: during "bpftool prog
loadall") the bpffs is mounted on the parent dir of PATH in the
following situations:
- the given dir exists but it is not bpffs.
- the given dir doesn't exist and the parent dir is not bpffs.
Mounting on the parent dir can also have the unintentional side-
effect of hiding other files located under the parent dir.
If the given dir exists but is not bpffs, then the bpffs should
be mounted on the given dir and not its parent dir.
Similarly, if the given dir doesn't exist and its parent dir is not
bpffs, then the given dir should be created and the bpffs should be
mounted on this new dir.
Fixes: 2a36c26fe3 ("bpftool: Support bpffs mountpoint as pin path for prog loadall")
Signed-off-by: Sahil Siddiq <icegambit91@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/2da44d24-74ae-a564-1764-afccf395eeec@isovalent.com/T/#t
Link: https://lore.kernel.org/bpf/20240404192219.52373-1-icegambit91@gmail.com
Closes: https://github.com/libbpf/bpftool/issues/100
Changes since v1:
- Split "mount_bpffs_for_pin" into two functions.
This is done to improve maintainability and readability.
Changes since v2:
- mount_bpffs_for_pin: rename to "create_and_mount_bpffs_dir".
- mount_bpffs_given_file: rename to "mount_bpffs_given_file".
- create_and_mount_bpffs_dir:
- introduce "dir_exists" boolean.
- remove new dir if "mnt_fs" fails.
- improve error handling and error messages.
Changes since v3:
- Rectify function name.
- Improve error messages and formatting.
- mount_bpffs_for_file:
- Check if dir exists before block_mount check.
Changes since v4:
- Use strdup instead of strcpy.
- create_and_mount_bpffs_dir:
- Use S_IRWXU instead of 0700.
- Improve error handling and formatting.
Introduce a test case to evaluate AF_XDP's robustness by pushing hardware
and software ring sizes to their limits. This test ensures AF_XDP's
reliability amidst potential producer/consumer throttling due to maximum
ring utilization. The testing strategy includes:
1. Configuring rings to their maximum allowable sizes.
2. Executing a series of tests across diverse batch sizes to assess
system's behavior under different configurations.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-8-tushar.vyavahare@intel.com
Add a new test case that stresses AF_XDP and the driver by configuring
small hardware and software ring sizes. This verifies that AF_XDP continues
to function properly even with insufficient ring space that could lead
to frequent producer/consumer throttling. The test procedure involves:
1. Set the minimum possible ring configuration(tx 64 and rx 128).
2. Run tests with various batch sizes(1 and 63) to validate the system's
behavior under different configurations.
Update Makefile to include network_helpers.o in the build process for
xskxceiver.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-7-tushar.vyavahare@intel.com
Introduce a new function called get_hw_size that retrieves both the
current and maximum size of the interface and stores this information
in the 'ethtool_ringparam' structure.
Remove ethtool_channels struct from xdp_hw_metadata.c due to redefinition
error. Remove unused linux/if.h include from flow_dissector BPF test to
address CI pipeline failure.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-4-tushar.vyavahare@intel.com
Convert the constant BATCH_SIZE into a variable named batch_size to allow
dynamic modification at runtime. This is required for the forthcoming
changes to support testing different hardware ring sizes.
While running these tests, a bug was identified when the batch size is
roughly the same as the NIC ring size. This has now been addressed by
Maciej's fix in commit 913eda2b08 ("i40e: xsk: remove count_mask").
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-3-tushar.vyavahare@intel.com
This commit duplicates the ethtool.h file from the include/uapi/linux
directory in the kernel source to the tools/include/uapi/linux directory.
This action ensures that the ethtool.h file used in the tools directory
is in sync with the kernel's version, maintaining consistency across the
codebase.
There are some checkpatch warnings in this file that could be cleaned up,
but I preferred to move it over as-is for now to avoid disrupting the code.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-2-tushar.vyavahare@intel.com
LLVM generates bpf_addr_space_cast instruction while translating
pointers between native (zero) address space and
__attribute__((address_space(N))). The addr_space=0 is reserved as
bpf_arena address space.
rY = addr_space_cast(rX, 0, 1) is processed by the verifier and
converted to normal 32-bit move: wX = wY.
rY = addr_space_cast(rX, 1, 0) : used to convert a bpf arena pointer to
a pointer in the userspace vma. This has to be converted by the JIT.
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Link: https://lore.kernel.org/r/20240325150716.4387-3-puranjay12@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When testing send_signal and stacktrace_build_id_nmi using the riscv sbi
pmu driver without the sscofpmf extension or the riscv legacy pmu driver,
then failures as follows are encountered:
test_send_signal_common:FAIL:perf_event_open unexpected perf_event_open: actual -1 < expected 0
#272/3 send_signal/send_signal_nmi:FAIL
test_stacktrace_build_id_nmi:FAIL:perf_event_open err -1 errno 95
#304 stacktrace_build_id_nmi:FAIL
The reason is that the above pmu driver or hardware does not support
sampling events, that is, PERF_PMU_CAP_NO_INTERRUPT is set to pmu
capabilities, and then perf_event_open returns EOPNOTSUPP. Since
PERF_PMU_CAP_NO_INTERRUPT is not only set in the riscv-related pmu driver,
it is better to skip testing when this capability is set.
Signed-off-by: Pu Lehui <pulehui@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240402073029.1299085-1-pulehui@huaweicloud.com
When generated BPF skeleton header is included in C++ code base, some
compiler setups will emit warning about using language extensions due to
typeof() usage, resulting in something like:
error: extension used [-Werror,-Wlanguage-extension-token]
obj->struct_ops.empty_tcp_ca = (typeof(obj->struct_ops.empty_tcp_ca))
^
It looks like __typeof__() is a preferred way to do typeof() with better
C++ compatibility behavior, so switch to that. With __typeof__() we get
no such warning.
Fixes: c2a0257c1e ("bpftool: Cast pointers for shadow types explicitly.")
Fixes: 00389c58ff ("bpftool: Add support for subskeletons")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Kui-Feng Lee <thinker.li@gmail.com>
Acked-by: Quentin Monnet <qmo@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20240401170713.2081368-1-andrii@kernel.org
Improve the formatting of the attach flags for cgroup programs in the
relevant man page, and fix typos ("can be on of", "an userspace inet
socket") when introducing that list. Also fix a couple of other trivial
issues in docs.
[ Quentin: Fixed trival issues in bpftool-gen.rst and bpftool-iter.rst ]
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-4-qmo@kernel.org
As it turns out, the terms in definition lists in the rST file are
already rendered with bold-ish formatting when generating the man pages;
all double-star sequences we have in the commands for the command
description are unnecessary, and can be removed to make the
documentation easier to read.
The rST files were automatically processed with:
sed -i '/DESCRIPTION/,/OPTIONS/ { /^\*/ s/\*\*//g }' b*.rst
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-3-qmo@kernel.org
The rST manual pages for bpftool would use a mix of tabs and spaces for
indentation. While this is the norm in C code, this is rather unusual
for rST documents, and over time we've seen many contributors use a
wrong level of indentation for documentation update.
Let's fix bpftool's indentation in docs once and for all:
- Let's use spaces, that are more common in rST files.
- Remove one level of indentation for the synopsis, the command
description, and the "see also" section. As a result, all sections
start with the same indentation level in the generated man page.
- Rewrap the paragraphs after the changes.
There is no content change in this patch, only indentation and
rewrapping changes. The wrapping in the generated source files for the
manual pages is changed, but the pages displayed with "man" remain the
same, apart from the adjusted indentation level on relevant sections.
[ Quentin: rebased on bpf-next, removed indent level for command
description and options, updated synopsis, command summary, and "see
also" sections. ]
Signed-off-by: Rameez Rehman <rameezrehman408@hotmail.com>
Signed-off-by: Quentin Monnet <qmo@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20240331200346.29118-2-qmo@kernel.org
When BPF selftests are built in RELEASE=1 mode with -O2 optimization
level, uprobe_multi binary, called from multi-uprobe tests is optimized
to the point that all the thousands of target uprobe_multi_func_XXX
functions are eliminated, breaking tests.
So ensure they are preserved by using weak attribute.
But, actually, compiling uprobe_multi binary with -O2 takes a really
long time, and is quite useless (it's not a benchmark). So in addition
to ensuring that uprobe_multi_func_XXX functions are preserved, opt-out
of -O2 explicitly in Makefile and stick to -O0. This saves a lot of
compilation time.
With -O2, just recompiling uprobe_multi:
$ touch uprobe_multi.c
$ time make RELEASE=1 -j90
make RELEASE=1 -j90 291.66s user 2.54s system 99% cpu 4:55.52 total
With -O0:
$ touch uprobe_multi.c
$ time make RELEASE=1 -j90
make RELEASE=1 -j90 22.40s user 1.91s system 99% cpu 24.355 total
5 minutes vs (still slow, but...) 24 seconds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240329190410.4191353-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Get addrs directly from available_filter_functions_addrs and
send to the kernel during kprobe_multi_attach. This avoids
consultation of /proc/kallsyms. But available_filter_functions_addrs
is introduced in 6.5, i.e., it is introduced recently,
so I skip the test if the kernel does not support it.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041523.1200301-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
In my locally build clang LTO kernel (enabling CONFIG_LTO and
CONFIG_LTO_CLANG_THIN), kprobe_multi_bench_attach/kernel subtest
failed like:
test_kprobe_multi_bench_attach:PASS:get_syms 0 nsec
test_kprobe_multi_bench_attach:PASS:kprobe_multi_empty__open_and_load 0 nsec
libbpf: prog 'test_kprobe_empty': failed to attach: No such process
test_kprobe_multi_bench_attach:FAIL:bpf_program__attach_kprobe_multi_opts unexpected error: -3
#117/1 kprobe_multi_bench_attach/kernel:FAIL
There are multiple symbols in /sys/kernel/debug/tracing/available_filter_functions
are renamed in /proc/kallsyms due to cross file inlining. One example is for
static function __access_remote_vm in mm/memory.c.
In a non-LTO kernel, we have the following call stack:
ptrace_access_vm (global, kernel/ptrace.c)
access_remote_vm (global, mm/memory.c)
__access_remote_vm (static, mm/memory.c)
With LTO kernel, it is possible that access_remote_vm() is inlined by
ptrace_access_vm(). So we end up with the following call stack:
ptrace_access_vm (global, kernel/ptrace.c)
__access_remote_vm (static, mm/memory.c)
The compiler renames __access_remote_vm to __access_remote_vm.llvm.<hash>
to prevent potential name collision.
The kernel bpf_kprobe_multi_link_attach() and ftrace_lookup_symbols() try
to find addresses based on /proc/kallsyms, hence the current test failed
with LTO kenrel.
This patch consulted /proc/kallsyms to find the corresponding entries
for the ksym and this solved the issue.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041518.1199758-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
With CONFIG_LTO_CLANG_THIN enabled, with some of previous
version of kernel code base ([1]), I hit the following
error:
test_ksyms:PASS:kallsyms_fopen 0 nsec
test_ksyms:FAIL:ksym_find symbol 'bpf_link_fops' not found
#118 ksyms:FAIL
The reason is that 'bpf_link_fops' is renamed to
bpf_link_fops.llvm.8325593422554671469
Due to cross-file inlining, the static variable 'bpf_link_fops'
in syscall.c is used by a function in another file. To avoid
potential duplicated names, the llvm added suffix
'.llvm.<hash>' ([2]) to 'bpf_link_fops' variable.
Such renaming caused a problem in libbpf if 'bpf_link_fops'
is used in bpf prog as a ksym but 'bpf_link_fops' does not
match any symbol in /proc/kallsyms.
To fix this issue, libbpf needs to understand that suffix '.llvm.<hash>'
is caused by clang lto kernel and to process such symbols properly.
With latest bpf-next code base built with CONFIG_LTO_CLANG_THIN,
I cannot reproduce the above failure any more. But such an issue
could happen with other symbols or in the future for bpf_link_fops symbol.
For example, with my current kernel, I got the following from
/proc/kallsyms:
ffffffff84782154 d __func__.net_ratelimit.llvm.6135436931166841955
ffffffff85f0a500 d tk_core.llvm.726630847145216431
ffffffff85fdb960 d __fs_reclaim_map.llvm.10487989720912350772
ffffffff864c7300 d fake_dst_ops.llvm.54750082607048300
I could not easily create a selftest to test newly-added
libbpf functionality with a static C test since I do not know
which symbol is cross-file inlined. But based on my particular kernel,
the following test change can run successfully.
> diff --git a/tools/testing/selftests/bpf/prog_tests/ksyms.c b/tools/testing/selftests/bpf/prog_tests/ksyms.c
> index 6a86d1f07800..904a103f7b1d 100644
> --- a/tools/testing/selftests/bpf/prog_tests/ksyms.c
> +++ b/tools/testing/selftests/bpf/prog_tests/ksyms.c
> @@ -42,6 +42,7 @@ void test_ksyms(void)
> ASSERT_EQ(data->out__bpf_link_fops, link_fops_addr, "bpf_link_fops");
> ASSERT_EQ(data->out__bpf_link_fops1, 0, "bpf_link_fops1");
> ASSERT_EQ(data->out__btf_size, btf_size, "btf_size");
> + ASSERT_NEQ(data->out__fake_dst_ops, 0, "fake_dst_ops");
> ASSERT_EQ(data->out__per_cpu_start, per_cpu_start_addr, "__per_cpu_start");
>
> cleanup:
> diff --git a/tools/testing/selftests/bpf/progs/test_ksyms.c b/tools/testing/selftests/bpf/progs/test_ksyms.c
> index 6c9cbb5a3bdf..fe91eef54b66 100644
> --- a/tools/testing/selftests/bpf/progs/test_ksyms.c
> +++ b/tools/testing/selftests/bpf/progs/test_ksyms.c
> @@ -9,11 +9,13 @@ __u64 out__bpf_link_fops = -1;
> __u64 out__bpf_link_fops1 = -1;
> __u64 out__btf_size = -1;
> __u64 out__per_cpu_start = -1;
> +__u64 out__fake_dst_ops = -1;
>
> extern const void bpf_link_fops __ksym;
> extern const void __start_BTF __ksym;
> extern const void __stop_BTF __ksym;
> extern const void __per_cpu_start __ksym;
> +extern const void fake_dst_ops __ksym;
> /* non-existing symbol, weak, default to zero */
> extern const void bpf_link_fops1 __ksym __weak;
>
> @@ -23,6 +25,7 @@ int handler(const void *ctx)
> out__bpf_link_fops = (__u64)&bpf_link_fops;
> out__btf_size = (__u64)(&__stop_BTF - &__start_BTF);
> out__per_cpu_start = (__u64)&__per_cpu_start;
> + out__fake_dst_ops = (__u64)&fake_dst_ops;
>
> out__bpf_link_fops1 = (__u64)&bpf_link_fops1;
This patch fixed the issue in libbpf such that
the suffix '.llvm.<hash>' will be ignored during comparison of
bpf prog ksym vs. symbols in /proc/kallsyms, this resolved the issue.
Currently, only static variables in /proc/kallsyms are checked
with '.llvm.<hash>' suffix since in bpf programs function ksyms
with '.llvm.<hash>' suffix are most likely kfunc's and unlikely
to be cross-file inlined.
Note that currently kernel does not support gcc build with lto.
[1] https://lore.kernel.org/bpf/20240302165017.1627295-1-yonghong.song@linux.dev/
[2] https://github.com/llvm/llvm-project/blob/release/18.x/llvm/include/llvm/IR/ModuleSummaryIndex.h#L1714-L1719
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20240326041458.1198161-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
