Like the previous patch, we now pass the superblock pointer to function
gfs2_write_disk_quota. This makes the code more understandable, since it
only operates on the quota inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this change function gfs2_adjust_quota's first parameter was an
gfs2_inode pointer. But it always pointed to the quota inode. Here we
switch that to pass the superblock pointer, sdp, so it is easier to read
the code and understand that it's only dealing with the quota inode.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Since patch 845802b112 function gfs2_write_buf_to_page checks if the
target inode is jdata or ordered. This function only operates on the
system quota file, which is always jdata, so the check for jdata is
useless. This patch removes it.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
This patch adds a new mount option quota=quiet which is the same as
quota=on but it suppresses gfs2 quota error messages.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Add the device name to the names of the gfs2_logd and gfs2_quotad kernel
threads to allow for easier identification.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename the "gfs_recovery" workqueue to "gfs2_recovery", and
gfs_recovery_wq to gfs2_recovery_wq.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_withdraw() tries to synchronize concurrent callers by
atomically setting the SDF_WITHDRAWN flag in the first caller, setting
the SDF_WITHDRAW_IN_PROG flag to indicate that a withdraw is in
progress, performing the actual withdraw, and clearing the
SDF_WITHDRAW_IN_PROG flag when done. All other callers wait for the
SDF_WITHDRAW_IN_PROG flag to be cleared before returning.
This leaves a small window in which callers can find the SDF_WITHDRAWN
flag set before the SDF_WITHDRAW_IN_PROG flag has been set, causing them
to return prematurely, before the withdraw has been completed.
Fix that by setting the SDF_WITHDRAWN and SDF_WITHDRAW_IN_PROG flags
atomically.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Immediately stop the logd and quotad kernel threads when a filesystem
withdraw is detected: those threads aren't doing anything useful after a
withdraw. (Depends on the extra logd and quotad task struct references
held since commit 7a109f383fa3 ("gfs2: Fix asynchronous thread
destruction").)
In addition, check for kthread_should_stop() in the wait condition in
gfs2_quotad() to stop immediately when kthread_stop() is called.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The kernel threads are currently stopped and destroyed synchronously by
gfs2_make_fs_ro() and gfs2_put_super(), and asynchronously by
signal_our_withdraw(), with no synchronization, so the synchronous and
asynchronous contexts can race with each other.
First, when creating the kernel threads, take an extra task struct
reference so that the task struct won't go away immediately when they
terminate. This allows those kthreads to terminate immediately when
they're done rather than hanging around as zombies until they are reaped
by kthread_stop(). When kthread_stop() is called on a terminated
kthread, it will return immediately.
Second, in signal_our_withdraw(), once the SDF_JOURNAL_LIVE flag has
been cleared, wake up the logd and quotad wait queues instead of
stopping the logd and quotad kthreads. The kthreads are then expected
to terminate automatically within short time, but if they cannot, they
will not block the withdraw.
For example, if a user process and one of the kthread decide to withdraw
at the same time, only one of them will perform the actual withdraw and
the other will wait for it to be done. If the kthread ends up being the
one to wait, the withdrawing user process won't be able to stop it.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
[ 81.372851][ T5532] CPU: 1 PID: 5532 Comm: syz-executor.0 Not tainted 6.2.0-rc1-syzkaller-dirty #0
[ 81.382080][ T5532] Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/12/2023
[ 81.392343][ T5532] Call Trace:
[ 81.395654][ T5532] <TASK>
[ 81.398603][ T5532] dump_stack_lvl+0x1b1/0x290
[ 81.418421][ T5532] gfs2_assert_warn_i+0x19a/0x2e0
[ 81.423480][ T5532] gfs2_quota_cleanup+0x4c6/0x6b0
[ 81.428611][ T5532] gfs2_make_fs_ro+0x517/0x610
[ 81.457802][ T5532] gfs2_withdraw+0x609/0x1540
[ 81.481452][ T5532] gfs2_inode_refresh+0xb2d/0xf60
[ 81.506658][ T5532] gfs2_instantiate+0x15e/0x220
[ 81.511504][ T5532] gfs2_glock_wait+0x1d9/0x2a0
[ 81.516352][ T5532] do_sync+0x485/0xc80
[ 81.554943][ T5532] gfs2_quota_sync+0x3da/0x8b0
[ 81.559738][ T5532] gfs2_sync_fs+0x49/0xb0
[ 81.564063][ T5532] sync_filesystem+0xe8/0x220
[ 81.568740][ T5532] generic_shutdown_super+0x6b/0x310
[ 81.574112][ T5532] kill_block_super+0x79/0xd0
[ 81.578779][ T5532] deactivate_locked_super+0xa7/0xf0
[ 81.584064][ T5532] cleanup_mnt+0x494/0x520
[ 81.593753][ T5532] task_work_run+0x243/0x300
[ 81.608837][ T5532] exit_to_user_mode_loop+0x124/0x150
[ 81.614232][ T5532] exit_to_user_mode_prepare+0xb2/0x140
[ 81.619820][ T5532] syscall_exit_to_user_mode+0x26/0x60
[ 81.625287][ T5532] do_syscall_64+0x49/0xb0
[ 81.629710][ T5532] entry_SYSCALL_64_after_hwframe+0x63/0xcd
In this backtrace, gfs2_quota_sync() takes quota data references and
then calls do_sync(). Function do_sync() encounters filesystem
corruption and withdraws the filesystem, which (among other things) calls
gfs2_quota_cleanup(). Function gfs2_quota_cleanup() wrongly assumes
that nobody is holding any quota data references anymore, and destroys
all quota data objects. When gfs2_quota_sync() then resumes and
dereferences the quota data objects it is holding, those objects are no
longer there.
Function gfs2_quota_cleanup() deals with resource deallocation and can
easily be delayed until gfs2_put_super() in the case of a filesystem
withdraw. In fact, most of the other work gfs2_make_fs_ro() does is
unnecessary during a withdraw as well, so change signal_our_withdraw()
to skip gfs2_make_fs_ro() and perform the necessary steps directly
instead.
Thanks to Edward Adam Davis <eadavis@sina.com> for the initial patches.
Link: https://lore.kernel.org/all/0000000000002b5e2405f14e860f@google.com
Reported-by: syzbot+3f6a670108ce43356017@syzkaller.appspotmail.com
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
In gfs2_quota_cleanup(), wait for the quota data objects to be freed
before returning. Otherwise, there is no guarantee that the quota data
objects will be gone when their kmem cache is destroyed.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Fix the refcount of quota data objects created directly by
gfs2_quota_init(): those are placed into the in-memory quota "database"
for eventual syncing to the main quota file, but they are not actively
held and should thus have an initial refcount of 0.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Once a filesystem is withdrawn, don't complain about quota changes
that can't be synced to the main quota file anymore.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename gfs2_qd_dispose() to gfs2_qd_dispose_list(). Move some code
duplicated in gfs2_qd_dispose_list() and gfs2_quota_cleanup() into a
new gfs2_qd_dispose() function.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Change gfs2_quota_cleanup() to move the quota data objects to dispose of
on a dispose list and call gfs2_qd_dispose() on that list, like
gfs2_qd_shrink_scan() does, instead of disposing of the quota data
objects directly.
This may look a bit pointless by itself, but it will make more sense in
combination with a fix that follows.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Function gfs2_qd_isolate must only return LRU_REMOVED when removing the
item from the lru list; otherwise, the number of items on the list will
go wrong.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename the SDF_DEACTIVATING flag to SDF_KILL to make it more obvious
that this relates to the kill_sb filesystem operation.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Rename sd_glock_wait to sd_kill_wait: we'll use it for other things
related to "killing" a filesystem on unmount soon (kill_sb).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Before this patch many of the functions in quota.c got their superblock
pointer, sdp, from the quota_data's glock pointer. That's silly because
the qd already has its own pointer to the superblock (qd_sbd).
This patch changes references to use that instead, eliminating a level
of indirection.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Commit f07b352021 ("GFS2: Made logd daemon take into account log
demand") changed gfs2_ail_flush_reqd() and gfs2_jrnl_flush_reqd() to
take sd_log_blks_needed into account, but the checks in
gfs2_log_commit() were not updated correspondingly.
Once that is fixed, gfs2_jrnl_flush_reqd() and gfs2_ail_flush_reqd() can
be used in gfs2_log_commit(). Make those two helpers available to
gfs2_log_commit() by defining them above gfs2_log_commit().
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
When quotad detects an I/O error, it sets sd_log_error and then it wakes
up logd to withdraw the filesystem. However, logd doesn't wake up when
sd_log_error is set. Fix that.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
First, function gfs2_ail_flush_reqd checks the SDF_FORCE_AIL_FLUSH flag
to determine if an AIL flush should be forced in low-memory situations.
However, it also immediately clears the flag, and when called repeatedly
as in function gfs2_logd, the flag will be lost. Fix that by pulling
the SDF_FORCE_AIL_FLUSH flag check out of gfs2_ail_flush_reqd.
Second, function gfs2_writepages sets the SDF_FORCE_AIL_FLUSH flag
whether or not enough pages were written. If enough pages could be
written, flushing the AIL is unnecessary, though.
Third, gfs2_writepages doesn't wake up logd after setting the
SDF_FORCE_AIL_FLUSH flag, so it can take a long time for logd to react.
It would be preferable to wake up logd, but that hurts the performance
of some workloads and we don't quite understand why so far, so don't
wake up logd so far.
Fixes: b066a4eebd ("gfs2: forcibly flush ail to relieve memory pressure")
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Consider the following case:
1. A glock is held in shared mode.
2. A process requests the glock in exclusive mode (rename).
3. Before the lock is granted, more processes (read / ls) request the
glock in shared mode again.
4. gfs2 sends a request to dlm for the lock in exclusive mode because
that holder is at the head of the queue.
5. Somehow the dlm request gets canceled, so dlm sends us back a
response with state == LM_ST_SHARED and LM_OUT_CANCELED. So at that
point, the glock is still held in shared mode.
6. finish_xmote gets called to process the response from dlm. It detects
that the glock is not in the requested mode and no demote is in
progress, so it moves the canceled holder to the tail of the queue
and finds the new holder at the head of the queue. That holder is
requesting the glock in shared mode.
7. finish_xmote calls do_xmote to transition the glock into shared mode,
but the glock is already in shared mode and so do_xmote complains
about that with:
GLOCK_BUG_ON(gl, gl->gl_state == gl->gl_target);
Instead, in finish_xmote, after moving the canceled holder to the tail
of the queue, check if any new holders can be granted. Only call
do_xmote to repeat the dlm request if the holder at the head of the
queue is requesting the glock in a mode that is incompatible with the
mode the glock is currently held in.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
The last user of this flag was removed in commit b77b4a4815 ("gfs2:
Rework freeze / thaw logic").
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Revert the rest of commit 220cca2a4f ("GFS2: Change truncate page
allocation to be GFP_NOFS"):
In gfs2_unstuff_dinode(), there is no need to carry out the page cache
allocation under GFP_NOFS because inodes on the "regular" filesystem are
never un-inlined under memory pressure, so switch back from
find_or_create_page() to grab_cache_page() here as well.
Inodes on the "metadata" filesystem can theoretically be un-inlined
under memory pressure, but any page cache allocations in that context
would happen in GFP_NOFS context because those inodes have
inode->i_mapping->gfp_mask set to GFP_NOFS (see the previous patch).
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Set mapping->gfp mask to GFP_NOFS for all metadata inodes so that
allocating pages in the address space of those inodes won't call back
into the filesystem. This allows to switch back from
find_or_create_page() to grab_cache_page() in two places.
Partially reverts commit 220cca2a4f ("GFS2: Change truncate page
allocation to be GFP_NOFS").
Thanks to Dan Carpenter <dan.carpenter@linaro.org> for pointing out a
Smatch static checker warning.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Simplify code pattern of 'folio->index + folio_nr_pages(folio)' by using
the existing helper folio_next_index().
Signed-off-by: Minjie Du <duminjie@vivo.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
With auto hibern8 enabled, UIC could be busy processing a hibern8 operation
and the HCI would reports UIC not ready for a short while through
HCS.UCRDY. The UFS driver doesn't currently handle this situation. The
UFSHCI spec specifies UCRDY like this: whether the host controller is ready
to process UIC COMMAND
The 'ready' could be seen as many different meanings. If the meaning
includes not processing any request from HCI, processing a hibern8
operation can be 'not ready'. In this situation, the driver needs to wait
until the operations is completed.
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Link: https://lore.kernel.org/r/550484ffb66300bdcec63d3e304dfd55cb432f1f.1693790060.git.kwmad.kim@samsung.com
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Chanwoo Lee <cw9316.lee@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
rqstlen and rsplen were changed to __le32 to fix sparse warnings:
drivers/scsi/qla2xxx/qla_nvme.c:402:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:402:30: expected restricted __le32 [usertype] cmd_len
drivers/scsi/qla2xxx/qla_nvme.c:402:30: got unsigned short [usertype] rsplen
drivers/scsi/qla2xxx/qla_nvme.c:507:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:507:30: expected restricted __le32 [usertype] cmd_len
drivers/scsi/qla2xxx/qla_nvme.c:507:30: got unsigned int [usertype] rqstlen
drivers/scsi/qla2xxx/qla_nvme.c:508:30: warning: incorrect type in assignment (different base types)
drivers/scsi/qla2xxx/qla_nvme.c:508:30: expected restricted __le32 [usertype] rsp_len
drivers/scsi/qla2xxx/qla_nvme.c:508:30: got unsigned int [usertype] rsplen
Correct the endianness in qla2xxx driver thus avoiding changes in
nvme-fc-driver.h.
Fixes: 875386b988 ("scsi: qla2xxx: Add Unsolicited LS Request and Response Support for NVMe")
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Link: https://lore.kernel.org/r/20230831112146.32595-1-njavali@marvell.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The following processes run into a deadlock. CPU 41 was waiting for CPU 29
to handle a CSD request while holding spinlock "crashdump_lock", but CPU 29
was hung by that spinlock with IRQs disabled.
PID: 17360 TASK: ffff95c1090c5c40 CPU: 41 COMMAND: "mrdiagd"
!# 0 [ffffb80edbf37b58] __read_once_size at ffffffff9b871a40 include/linux/compiler.h:185:0
!# 1 [ffffb80edbf37b58] atomic_read at ffffffff9b871a40 arch/x86/include/asm/atomic.h:27:0
!# 2 [ffffb80edbf37b58] dump_stack at ffffffff9b871a40 lib/dump_stack.c:54:0
# 3 [ffffb80edbf37b78] csd_lock_wait_toolong at ffffffff9b131ad5 kernel/smp.c:364:0
# 4 [ffffb80edbf37b78] __csd_lock_wait at ffffffff9b131ad5 kernel/smp.c:384:0
# 5 [ffffb80edbf37bf8] csd_lock_wait at ffffffff9b13267a kernel/smp.c:394:0
# 6 [ffffb80edbf37bf8] smp_call_function_many at ffffffff9b13267a kernel/smp.c:843:0
# 7 [ffffb80edbf37c50] smp_call_function at ffffffff9b13279d kernel/smp.c:867:0
# 8 [ffffb80edbf37c50] on_each_cpu at ffffffff9b13279d kernel/smp.c:976:0
# 9 [ffffb80edbf37c78] flush_tlb_kernel_range at ffffffff9b085c4b arch/x86/mm/tlb.c:742:0
#10 [ffffb80edbf37cb8] __purge_vmap_area_lazy at ffffffff9b23a1e0 mm/vmalloc.c:701:0
#11 [ffffb80edbf37ce0] try_purge_vmap_area_lazy at ffffffff9b23a2cc mm/vmalloc.c:722:0
#12 [ffffb80edbf37ce0] free_vmap_area_noflush at ffffffff9b23a2cc mm/vmalloc.c:754:0
#13 [ffffb80edbf37cf8] free_unmap_vmap_area at ffffffff9b23bb3b mm/vmalloc.c:764:0
#14 [ffffb80edbf37cf8] remove_vm_area at ffffffff9b23bb3b mm/vmalloc.c:1509:0
#15 [ffffb80edbf37d18] __vunmap at ffffffff9b23bb8a mm/vmalloc.c:1537:0
#16 [ffffb80edbf37d40] vfree at ffffffff9b23bc85 mm/vmalloc.c:1612:0
#17 [ffffb80edbf37d58] megasas_free_host_crash_buffer [megaraid_sas] at ffffffffc020b7f2 drivers/scsi/megaraid/megaraid_sas_fusion.c:3932:0
#18 [ffffb80edbf37d80] fw_crash_state_store [megaraid_sas] at ffffffffc01f804d drivers/scsi/megaraid/megaraid_sas_base.c:3291:0
#19 [ffffb80edbf37dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
#20 [ffffb80edbf37dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
#21 [ffffb80edbf37de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
#22 [ffffb80edbf37e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
#23 [ffffb80edbf37ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
#24 [ffffb80edbf37ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
#25 [ffffb80edbf37ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
#26 [ffffb80edbf37f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
#27 [ffffb80edbf37f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0
PID: 17355 TASK: ffff95c1090c3d80 CPU: 29 COMMAND: "mrdiagd"
!# 0 [ffffb80f2d3c7d30] __read_once_size at ffffffff9b0f2ab0 include/linux/compiler.h:185:0
!# 1 [ffffb80f2d3c7d30] native_queued_spin_lock_slowpath at ffffffff9b0f2ab0 kernel/locking/qspinlock.c:368:0
# 2 [ffffb80f2d3c7d58] pv_queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/paravirt.h:674:0
# 3 [ffffb80f2d3c7d58] queued_spin_lock_slowpath at ffffffff9b0f244b arch/x86/include/asm/qspinlock.h:53:0
# 4 [ffffb80f2d3c7d68] queued_spin_lock at ffffffff9b8961a6 include/asm-generic/qspinlock.h:90:0
# 5 [ffffb80f2d3c7d68] do_raw_spin_lock_flags at ffffffff9b8961a6 include/linux/spinlock.h:173:0
# 6 [ffffb80f2d3c7d68] __raw_spin_lock_irqsave at ffffffff9b8961a6 include/linux/spinlock_api_smp.h:122:0
# 7 [ffffb80f2d3c7d68] _raw_spin_lock_irqsave at ffffffff9b8961a6 kernel/locking/spinlock.c:160:0
# 8 [ffffb80f2d3c7d88] fw_crash_buffer_store [megaraid_sas] at ffffffffc01f8129 drivers/scsi/megaraid/megaraid_sas_base.c:3205:0
# 9 [ffffb80f2d3c7dc0] dev_attr_store at ffffffff9b56dd7b drivers/base/core.c:758:0
#10 [ffffb80f2d3c7dd0] sysfs_kf_write at ffffffff9b326acf fs/sysfs/file.c:144:0
#11 [ffffb80f2d3c7de0] kernfs_fop_write at ffffffff9b325fd4 fs/kernfs/file.c:316:0
#12 [ffffb80f2d3c7e20] __vfs_write at ffffffff9b29418a fs/read_write.c:480:0
#13 [ffffb80f2d3c7ea8] vfs_write at ffffffff9b294462 fs/read_write.c:544:0
#14 [ffffb80f2d3c7ee8] SYSC_write at ffffffff9b2946ec fs/read_write.c:590:0
#15 [ffffb80f2d3c7ee8] SyS_write at ffffffff9b2946ec fs/read_write.c:582:0
#16 [ffffb80f2d3c7f30] do_syscall_64 at ffffffff9b003ca9 arch/x86/entry/common.c:298:0
#17 [ffffb80f2d3c7f58] entry_SYSCALL_64 at ffffffff9ba001b1 arch/x86/entry/entry_64.S:238:0
The lock is used to synchronize different sysfs operations, it doesn't
protect any resource that will be touched by an interrupt. Consequently
it's not required to disable IRQs. Replace the spinlock with a mutex to fix
the deadlock.
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Link: https://lore.kernel.org/r/20230828221018.19471-1-junxiao.bi@oracle.com
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The allocation and initialization errors at alloc_midi_urbs() that is
called at MIDI 2.0 / UMP device are supposed to be handled at the
caller side by invoking free_midi_urbs(). However, free_midi_urbs()
loops only for ep->num_urbs entries, and since ep->num_entries wasn't
updated yet at the allocation / init error in alloc_midi_urbs(), this
entry won't be released.
The intention of free_midi_urbs() is to release the whole elements, so
change the loop size to NUM_URBS to scan over all elements for fixing
the missed releases.
Also, the call of free_midi_urbs() is missing at
snd_usb_midi_v2_open(). Although it'll be released later at
reopen/close or disconnection, it's better to release immediately at
the error path.
Fixes: ff49d1df79 ("ALSA: usb-audio: USB MIDI 2.0 UMP support")
Reported-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Closes: https://lore.kernel.org/r/fc275ed315b9157952dcf2744ee7bdb78defdb5f.1693746347.git.christophe.jaillet@wanadoo.fr
Link: https://lore.kernel.org/r/20230905054511.20502-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pull more power management updates from Rafael Wysocki:
"These fix cpufreq core and the pcc cpufreq driver, add per-policy
boost support to cpufreq and add Georgian translation Makefile
LANGUAGES in cpupower.
Specifics:
- Add Georgian translation to Makefile LANGUAGES in cpupower (Shuah
Khan).
- Add support for per-policy performance boost to cpufreq (Jie Zhan).
- Fix assorted issues in the cpufreq core, common governor code and
in the pcc cpufreq driver (Liao Chang)"
* tag 'pm-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: Support per-policy performance boost
cpufreq: pcc: Fix the potentinal scheduling delays in target_index()
cpufreq: governor: Free dbs_data directly when gov->init() fails
cpufreq: Fix the race condition while updating the transition_task of policy
cpufreq: Avoid printing kernel addresses in cpufreq_resume()
cpupower: Add Georgian translation to Makefile LANGUAGES
Pull more thermal control updates from Rafael Wysocki:
"These are mostly updates of thermal control drivers for ARM platforms,
new thermal control support for Loongson-2 and a couple of core
cleanups made possible by recent changes merged previously.
Specifics:
- Check if the Tegra BPMP supports the trip points in order to set
the .set_trips callback (Mikko Perttunen)
- Add new Loongson-2 thermal sensor along with the DT bindings (Yinbo
Zhu)
- Use IS_ERR_OR_NULL() helper to replace a double test on the TI
bandgap sensor (Li Zetao)
- Remove redundant platform_set_drvdata() calls, as there are no
corresponding calls to platform_get_drvdata(), from a bunch of
drivers (Andrei Coardos)
- Switch the Mediatek LVTS mode to filtered in order to enable
interrupts (Nícolas F. R. A. Prado)
- Fix Wvoid-pointer-to-enum-cast warning on the Exynos TMU (Krzysztof
Kozlowski)
- Remove redundant dev_err_probe(), because the underlying function
already called it, from the Mediatek sensor (Chen Jiahao)
- Free calibration nvmem after reading it on sun8i (Mark Brown)
- Remove useless comment from the sun8i driver (Yangtao Li)
- Make tsens_xxxx_nvmem static to fix a sparse warning on QCom tsens
(Min-Hua Chen)
- Remove error message at probe deferral on imx8mm (Ahmad Fatoum)
- Fix parameter check in lvts_debugfs_init() with IS_ERR() on
Mediatek LVTS (Minjie Du)
- Fix interrupt routine and configuratoin for Mediatek LVTS (Nícolas
F. R. A. Prado)
- Drop unused .get_trip_type(), .get_trip_temp() and .get_trip_hyst()
thermal zone callbacks from the core and rework the .get_trend()
one to take a trip point pointer as an argument (Rafael Wysocki)"
* tag 'thermal-6.6-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (29 commits)
thermal: core: Rework .get_trend() thermal zone callback
thermal: core: Drop unused .get_trip_*() callbacks
thermal/drivers/tegra-bpmp: Check if BPMP supports trip points
thermal: dt-bindings: add loongson-2 thermal
thermal/drivers/loongson-2: Add thermal management support
thermal/drivers/ti-soc-thermal: Use helper function IS_ERR_OR_NULL()
thermal/drivers/generic-adc: Removed unneeded call to platform_set_drvdata()
thermal/drivers/max77620_thermal: Removed unneeded call to platform_set_drvdata()
thermal/drivers/mediatek/auxadc_thermal: Removed call to platform_set_drvdata()
thermal/drivers/sun8i_thermal: Remove unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/brcstb_thermal: Removed unneeded platform_set_drvdata()
thermal/drivers/mediatek/lvts_thermal: Make readings valid in filtered mode
thermal/drivers/k3_bandgap: Remove unneeded call to platform_set_drvdata()
thermal/drivers/k3_j72xx_bandgap: Removed unneeded call to platform_set_drvdata()
thermal/drivers/broadcom/sr-thermal: Removed call to platform_set_drvdata()
thermal/drivers/samsung: Fix Wvoid-pointer-to-enum-cast warning
thermal/drivers/db8500: Remove redundant of_match_ptr()
thermal/drivers/mediatek: Clean up redundant dev_err_probe()
thermal/drivers/sun8i: Free calibration nvmem after reading it
thermal/drivers/sun8i: Remove unneeded comments
...
Pull remoteproc updates from Bjorn Andersson:
"Support for booting the iMX remoteprocs using MMIO, instead of SMCCC
is added. The iMX driver is also extended to support delivering
interrupts from an arbitrary number of vdev.
Support is added to the TI PRU driver, to allow GPMUX to be controlled
from DeviceTree.
The Qualcomm coredump collector is extended to fall back to generating
a full coredump, in the case that the loaded firmware doesn't support
generating minidump. The overly terse MD abbreviation of "MINIDUMP" is
expanded, to make the code easier on the eye.
The list of Qualcomm Sensor Low Power Island (SLPI) instances
supported is cleaned up, and SDM845 is added. SDM630/636/660 support
for the modem subsystem (mss) is added.
All the Qualcomm drivers are transitioned to of_reserved_mem_lookup()
instead of open coding the resolution of reserved-memory regions, to
gain handling of error cases. A couple of drivers are transitioned to
use devm_platform_ioremap_resource_byname().
The stm32 remoteproc driver's PM operations are updated to modern
macros, to avoid the "unused variable"-warning in some configurations.
Drivers are transitioned away from directly including of_device.h"
* tag 'rproc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (23 commits)
remoteproc: pru: add support for configuring GPMUX based on client setup
remoteproc: stm32: fix incorrect optional pointers
remoteproc: imx_rproc: Switch iMX8MN/MP from SMCCC to MMIO
dt-bindings: remoteproc: imx_rproc: Support i.MX8MN/P MMIO
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Fix 8996 clocks
remoteproc: qcom: pas: add SDM845 SLPI compatible
remoteproc: qcom: q6v5-mss: Add support for SDM630/636/660
dt-bindings: remoteproc: qcom,msm8996-mss-pil: Add SDM660 compatible
remoteproc: qcom: Expand MD_* as MINIDUMP_*
remoteproc: qcom: pas: refactor SLPI remoteproc init
dt-bindings: remoteproc: qcom: adsp: add qcom,sdm845-slpi-pas compatible
remoteproc: qcom: wcnss: use devm_platform_ioremap_resource_byname()
remoteproc: qcom: q6v5: use devm_platform_ioremap_resource_byname()
dt-bindings: remoteproc: qcom: sm6115-pas: Add QCM2290
remoteproc: qcom: Add full coredump fallback mechanism
remoteproc: core: Export the rproc coredump APIs
remoteproc: qcom: Use of_reserved_mem_lookup()
remoteproc: imx_rproc: iterate all notifiyids in rx callback
dt-bindings: remoteproc: qcom,adsp: bring back firmware-name
dt-bindings: remoteproc: qcom,sm8550-pas: require memory-region
...
