The BCM43752 is not reliable with the default 512-byte SDIO function 2
block size: on an i.MX8MP board with an AMPAK AP6275S module at
SDR104 / 200 MHz, an iperf TX stress test kills WLAN within seconds:
mmc_submit_one: CMD53 sg block write failed -84
brcmf_sdio_dpc: failed backplane access over SDIO, halting operation
Commit d2587c57ff ("brcmfmac: add 43752 SDIO ids and initialization")
set up the 43752 like the 4373 for the F2 watermark but missed the F2
block size, which the 4373 limits to 256 bytes. The vendor driver
(bcmdhd) also programs a 256-byte F2 block size for this chip and runs
the same hardware without errors.
Group the 43752 with the 4373, matching the F2 watermark handling.
With this change a 10-minute bidirectional iperf3 soak completes with
zero SDIO errors at ~270 Mbit/s in each direction.
Backporting note: kernels before v6.18 name this id
SDIO_DEVICE_ID_BROADCOM_CYPRESS_43752, so on those trees the case
label added by this patch must be adjusted to that name. Cherry-picking
the rename commit 74e2ef72bd ("wifi: brcmfmac: fix 43752 SDIO FWVID
incorrectly labelled as Cypress (CYW)") first is not a clean
alternative: on trees before v6.17 its context collides with the 43751
additions, and trees before v6.2 lack the FWVID framework it touches.
Fixes: d2587c57ff ("brcmfmac: add 43752 SDIO ids and initialization")
Cc: stable@vger.kernel.org # see patch description, needs adjustments for <= 6.17
Signed-off-by: LiangCheng Wang <zaq14760@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260715-b43752-f2-blksz-v2-1-f9be49856050@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
brcmf_fw_crashed() and the debugfs "reset" entry both schedule
drvr->bus_reset, whose callback recovers drvr through container_of()
and dereferences it. The removal path frees drvr (brcmf_free ->
wiphy_free) without draining the work, so a bus_reset callback pending
or running during removal can outlive drvr.
Cancellation cannot live in brcmf_detach() or brcmf_free(): the work
callback reaches teardown through the bus .reset op (PCIe
brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset ->
brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for
the running work and deadlock.
Add a per-bus mutex (bus_reset_lock) and route all arming through
brcmf_bus_schedule_reset(), which under the lock skips when the bus is
marked removing. Each bus remove entry calls
brcmf_bus_cancel_reset_work(), which under the same lock sets removing
and cancels the work. Holding the mutex across cancel_work_sync() makes
the set-removing + drain step atomic. Every producer reaches the arming
path from process context -- the PCIe firmware-halt notification runs in
the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail
path runs from the data workqueue -- so the mutex is taken only in
sleepable contexts. Where applicable the remove entry first stops the
firmware-crash producer: on PCIe mask the mailbox and synchronize_irq;
on SDIO unregister the bus interrupt and cancel the data worker, which
also reports firmware halts through brcmf_fw_crashed(). The mutex is
initialized at bus allocation. The SDIO suspend power-off path frees
drvr through the same brcmf_sdiod_remove() and takes the same lock;
resume re-allows the work only on a successful re-probe.
Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire
before brcmf_attach() wires up drvr, and it dereferences drvr
(bphy_err/brcmf_dev_coredump) before reaching the arming gate.
The bus_reset work is shared across buses, so the drain is applied to
every remove path: PCIe (the .reset op introduced by the Fixes commit),
SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the
debugfs "reset" entry). cancel_work_sync() drains a running or pending
bus_reset work item before removal frees drvr, and patch 1/2 makes the
scratch-buffer release safe when reset teardown has already released
those DMA buffers.
This patch fixes the lifetime of the bus_reset work item itself. It does
not attempt to address the separate, pre-existing lifetime of the
asynchronous firmware completion started by the PCIe reset path. That
callback needs its own lifetime/ownership protocol and is being tracked
separately.
This issue was found by an in-house static analysis tool.
Fixes: 4684997d9e ("brcmfmac: reset PCIe bus on a firmware crash")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Assisted-by: Codex:gpt-5.6
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260718024353.3147201-3-fanwu01@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
brcmf_pcie_release_scratchbuffers() frees the shared.scratch and
shared.ringupd DMA buffers with dma_free_coherent() but does not clear
the pointers afterwards, unlike the sibling release_ringbuffers() which
NULLs commonrings/flowrings/idxbuf on release.
Both the bus_reset .reset callback (brcmf_pcie_reset) and
brcmf_pcie_remove() call release_scratchbuffers. When reset teardown
has run before removal, remove's own teardown would call
dma_free_coherent() a second time on the already-freed DMA allocation.
NULL the pointers after free, matching release_ringbuffers(), so a later
release observes that the allocation has already been released. This
patch makes repeated sequential release safe; the reset-work lifetime is
handled separately by the following patch.
This issue was found by an in-house static analysis tool.
Fixes: 4684997d9e ("brcmfmac: reset PCIe bus on a firmware crash")
Cc: stable@vger.kernel.org
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Assisted-by: Codex:gpt-5.6
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260718024353.3147201-2-fanwu01@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Too many robustness fixes to list. Mostly for
- slight out-of-bounds reads of SKBs,
- leaks on error conditions, and
- malformed netlink input rejection.
* tag 'wireless-2026-07-09' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: (46 commits)
wifi: cfg80211: bound element ID read when checking non-inheritance
wifi: brcmfmac: cyw: fix heap overflow on a short auth frame
wifi: brcmfmac: initialize SDIO data work before cleanup
wifi: cfg80211: validate assoc response length before status and IE access
wifi: cfg80211: validate rx/tx MLME callback frame lengths before access
wifi: mac80211: ibss: wait for in-flight TX on disconnect
wifi: mac80211: recalculate rx_nss on IBSS peer capability update
wifi: cfg80211: use wiphy work for socket owner autodisconnect
wifi: mac80211: fix memory leak in ieee80211_register_hw()
wifi: mac80211: free AP_VLAN bc_buf SKBs outside IRQ lock
wifi: mac80211: validate deauth frame length before reason access
wifi: mac80211: avoid non-S1G AID fallback for S1G assoc
wifi: cfg80211: reject empty PMSR peer lists
wifi: cfg80211: reject unsupported PMSR FTM location requests
wifi: cfg80211: validate PMSR FTM preamble range
wifi: cfg80211: validate PMSR measurement type data
wifi: nl80211: constrain MBSSID TX link ID range
wifi: nl80211: validate nested MBSSID IE blobs
wifi: ieee80211: validate MLE common info length
wifi: cfg80211: derive S1G beacon TSF from S1G fields
...
====================
Link: https://patch.msgid.link/20260709115038.243870-3-johannes@sipsolutions.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
brcmf_notify_auth_frame_rx() takes the frame length from the firmware
event and copies the frame body with the management header offset
subtracted:
u32 mgmt_frame_len = e->datalen - sizeof(struct brcmf_rx_mgmt_data);
...
memcpy(&mgmt_frame->u, frame,
mgmt_frame_len - offsetof(struct ieee80211_mgmt, u));
The only length check is e->datalen >= sizeof(*rxframe), so mgmt_frame_len
can be anything from 0 up. offsetof(struct ieee80211_mgmt, u) is 24. When
mgmt_frame_len is below that, the subtraction wraps as an unsigned value to
a huge length. The memcpy then runs far past the kzalloc'd buffer. A
malicious or malfunctioning AP can make the frame short during the
external SAE auth exchange, so this is a remotely triggered heap overflow.
Reject frames shorter than the management header offset before the copy.
Fixes: 66f909308a ("wifi: brcmfmac: cyw: support external SAE authentication in station mode")
Link: https://lore.kernel.org/r/178214417708.2368577.16740907093694208834@maoyixie.com
Cc: stable@vger.kernel.org
Co-developed-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Kaixuan Li <kaixuan.li@ntu.edu.sg>
Signed-off-by: Maoyi Xie <maoyixie.tju@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260627131313.3878893-1-maoyixie.tju@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
brcmf_sdio_probe() stores the newly allocated bus in sdiodev->bus before
allocating the ordered workqueue. If that allocation fails, the function
jumps to fail and calls brcmf_sdio_remove().
brcmf_sdio_remove() unconditionally cancels bus->datawork. Initialize the
work item before the first failure path that can reach brcmf_sdio_remove(),
so the cleanup path always observes a valid work object.
This issue was found by our static analysis tool and then confirmed by
manual review of the probe error path and the remove-time work drain. The
problem pattern is an early setup failure that reaches a cleanup helper
which cancels an embedded work item before its initializer has run.
A QEMU PoC forced alloc_ordered_workqueue() to fail at the same point in
brcmf_sdio_probe(), before INIT_WORK(&bus->datawork) is reached. The
resulting fail path calls brcmf_sdio_remove(), and DEBUG_OBJECTS reports
the invalid work drain with brcmf_sdio_probe() and brcmf_sdio_remove() in
the stack.
Fixes: 9982464379 ("brcmfmac: make sdio suspend wait for threads to freeze")
Signed-off-by: Runyu Xiao <runyu.xiao@seu.edu.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260619064401.1048976-1-runyu.xiao@seu.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the 2.4 GHz RF power offset table for N-PHY rev 8 paired with
radio 2057 rev 8 and wire it to the existing dispatcher.
b43_ntab_get_rf_pwr_offset_table() currently dispatches on phy->rev
== 17 (radio_rev 14) and phy->rev == 16 (radio_rev 9) for 2.4 GHz.
phy->rev == 8 falls through and the function logs:
b43-phyX ERROR: No 2GHz RF power table available for this device
Add a phy->rev == 8 / radio_rev == 8 case returning the new table.
The values are sourced from the proprietary Broadcom wl driver's
nphy_papd_padgain_dlt_2g_2057rev5 array. Reusing the rev 5 values
is structurally appropriate: the IPA TX gain table added by the
preceding patch in this series shares the low 24 bits of every
entry with rev 5 - same gain step amplitudes, only the PAD-gain
selector byte differs. b43's pad_gain extraction in
b43_nphy_tx_pwr_ctl_init() reads bits 19..23 of the gain entry,
which sit in the shared low-24-bit range; the same gain index
therefore maps to the same physical PAD gain code on both
revisions and warrants the same per-index dB offset.
Note that b43_nphy_tx_gain_table_upload() currently has a "TODO:
Enable this once we have gains configured" early-return for
phy->rev >= 7. With that early-return in place, this table is
fetched (silencing the b43err that would otherwise abort PHY
init) but its values are not yet written to MMIO. Resolving the
TODO is a future, separate task.
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-7-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the 2.4 GHz channel info table for N-PHY rev 8 paired with
radio 2057 rev 8 and wire it to the existing dispatcher in
r2057_get_chantabent_rev7().
The dispatcher's case 8 currently handles radio_rev == 5 only.
For radio_rev == 8 both output pointers stay NULL,
b43_nphy_set_channel() returns an error and channel switch to
the default channel fails.
The new b43_nphy_chantab_phy_rev8_radio_rev8[] is 14 entries
covering the standard 2.4 GHz channel set (2412..2472 in 5 MHz
steps, plus 2484 for channel 14).
Values extracted from an MMIO dump of the proprietary Broadcom wl
driver running on BCM6362 silicon (wl driver 6.30.102.7).
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-6-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add the 2.4 GHz IPA TX gain table for N-PHY rev 8 paired with radio
2057 rev 8 and wire it to the existing dispatcher.
b43_nphy_get_ipa_gain_table() in tables_nphy.c currently handles
case 8 only for radio_rev == 5; radio_rev == 8 falls through and
the function logs:
b43-phyX ERROR: No 2GHz IPA gain table available for this device
b43-phyX ERROR: PHY init: Channel switch to default failed
leaving b43_phy_init() to return an error and core_init to abort
before the MAC is enabled.
The high byte of every entry differs from the rev 5 sibling (0x40
vs 0x30): different PAD-gain code prefix for the rev 8 front-end.
The low 24 bits coincide with rev 5 across the whole table - the
gain step amplitudes are the same, only the PAD-gain selector
prefix changes.
Values extracted from an MMIO dump of the proprietary Broadcom wl
driver running on BCM6362 silicon (wl driver 6.30.102.7).
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-5-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add support for radio 2057 revision 8, paired with N-PHY rev 8 on
the Broadcom BCM6362 single-die integrated 2.4 GHz wireless block.
Three correlated changes are needed for the same chip:
- main.c: the radio_rev allow-list under B43_PHYTYPE_N currently
accepts radio 2057 revisions 9 and 14 only; extend to include
rev 8.
- radio_2057.c: the existing r2057_rev8_init[] is a 54-entry stub
declared inside a TODO comment block and never referenced
from r2057_upload_inittabs().
Replace it with the full 412-entry register set actually
programmed by the proprietary Broadcom wl driver on this radio.
I couldn't find the origin of the original 54-entry stub - 8
of its entries do not appear at all in the rev 8 register set
and 7 more carry different values.
Loading it instead of using the real table leaves the radio
hanging producing a "Microcode not responding" timeout.
- radio_2057.c: r2057_upload_inittabs() case 8 handles radio_rev
5 and 7 only; add the radio_rev == 8 branch pointing at the
new table.
The init table is extracted from an MMIO dump of the radio
register set programmed during proprietary driver initialisation
on BCM6362 silicon (Broadcom wl driver 6.30.102.7).
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-4-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Rev 22 backports the older 802.11 core but pairs it with a radio
in the 2057 family, which requires the 24-bit indirect path. With
the current dispatch, corerev 22 falls into the legacy 4-wire branch,
reads garbage for radio_id, and bails out with -EOPNOTSUPP at the
"FOUND UNSUPPORTED RADIO" branch below.
brcmsmac handles the same silicon family with the equivalent
dispatch in drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/
phy_cmn.c read_radio_reg() and write_radio_reg():
if ((D11REV_GE(pi->sh->corerev, 24)) ||
(D11REV_IS(pi->sh->corerev, 22)
&& (pi->pubpi.phy_type != PHY_TYPE_SSN))) {
/* radioregaddr / radioregdata (indirect) */
} else {
/* phy4waddr / phy4wdatalo (legacy) */
}
b43 does not support SSN/SSLPN PHYs - they are rejected earlier in
b43_phy_versioning() at the "unsupported PHY type" switch - so just
adding the check corerev == 22 will do.
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-3-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add d11 core revision 0x16 (= 22) to the b43 bcma device id table.
The b43 bcma id table covers d11 revisions 0x11, 0x15, 0x17, 0x18,
0x1C, 0x1D, 0x1E, 0x28 and 0x2A. Revision 0x16 belongs to the same
N-PHY family as revisions 0x17 and 0x18 (radio 2057) and needs no
new PHY or radio code beyond the radio_rev 8 dispatcher entries
added later in this series - only the device id entry is missing.
Without it bcma scan enumerates the 802.11 core but no driver binds.
The revision is used by the Broadcom BCM6362 single-die integrated
2.4 GHz wireless block found in xDSL SoCs.
Assisted-by: Claude:claude-4.7-opus
Signed-off-by: Alessio Ferri <alessio.ferri@mythread.it>
Acked-by: Michael Büsch <m@bues.ch>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Link: https://patch.msgid.link/20260528-b43_complete_n_phy_rev_8_radio_2057_rev_8_support-v4-2-464566194d47@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently the remain_on_channel operation does not support
filtering incoming frames by destination MAC address. This
prevents use cases such as PASN authentication in the
responder side that need to receive frames addressed to a
specific MAC during the off-channel period.
Add an rx_addr parameter to the remain_on_channel operation
callback and propagate it through the call chain from nl80211
to driver implementations. Introduce the extended feature
NL80211_EXT_FEATURE_ROC_ADDR_FILTER as a capability gate so
that cfg80211 rejects the request if the driver does not
advertise support for address filtering. Extract the address
from the NL80211_ATTR_MAC attribute when provided in the
netlink message and update the tracing infrastructure to
include the address in remain_on_channel trace events. The
rx_addr parameter is optional and can be NULL, maintaining
backward compatibility with existing drivers.
Signed-off-by: Peddolla Harshavardhan Reddy <peddolla.reddy@oss.qualcomm.com>
Link: https://patch.msgid.link/20260420090856.2152905-3-peddolla.reddy@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The variable rfpll_doubler is initialized to 0 and then unconditionally
set to 1 on the very next line, making the subsequent check for
!rfpll_doubler always evaluate to false. This results in logically
dead code that has never been executed.
Remove the unused variable, the unreachable conditional branch, and
simplify the fpfd calculation to directly use the PLL doubler values.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260403193324.141753-1-chelsyratnawat2001@gmail.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Final updates, notably:
- crypto: move Michael MIC code into wireless (only)
- mac80211:
- multi-link 4-addr support
- NAN data support (but no drivers yet)
- ath10k: DT quirk to make it work on some devices
- ath12k: IPQ5424 support
- rtw89: USB improvements for performance
* tag 'wireless-next-2026-04-10' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (124 commits)
wifi: cfg80211: Explicitly include <linux/export.h> in michael-mic.c
wifi: ath10k: Add device-tree quirk to skip host cap QMI requests
dt-bindings: wireless: ath10k: Add quirk to skip host cap QMI requests
crypto: Remove michael_mic from crypto_shash API
wifi: ipw2x00: Use michael_mic() from cfg80211
wifi: ath12k: Use michael_mic() from cfg80211
wifi: ath11k: Use michael_mic() from cfg80211
wifi: mac80211, cfg80211: Export michael_mic() and move it to cfg80211
wifi: ipw2x00: Rename michael_mic() to libipw_michael_mic()
wifi: libertas_tf: refactor endpoint lookup
wifi: libertas: refactor endpoint lookup
wifi: at76c50x: refactor endpoint lookup
wifi: ath12k: Enable IPQ5424 WiFi device support
wifi: ath12k: Add CE remap hardware parameters for IPQ5424
wifi: ath12k: add ath12k_hw_regs for IPQ5424
wifi: ath12k: add ath12k_hw_version_map entry for IPQ5424
wifi: ath12k: Add ath12k_hw_params for IPQ5424
dt-bindings: net: wireless: add ath12k wifi device IPQ5424
wifi: ath10k: fix station lookup failure during disconnect
wifi: ath12k: Create symlink for each radio in a wiphy
...
====================
Link: https://patch.msgid.link/20260410064703.735099-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver tries to load optional firmware files, specific to
the actual board compatible. These might not exist resulting in a warning
like this:
brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac4373-sdio.tq,imx93-tqma9352-mba93xxla-mini.bin failed with error -2
Silence this by using firmware_request_nowait_nowarn() for all firmware
loads which use brcmf_fw_request_done_alt_path() as callback. This one
handles optional firmware files.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Tested-by: Christian Hewitt <christianshewitt@gmail.com>
[arend: use nowarn api for optional firmware files]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260328140121.2583606-1-arend.vanspriel@broadcom.com
[clean up code a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function brcmf_chip_add_core() can return an error pointer and is
not checked. Add checks for error pointer.
Detected by Smatch:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1010 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1013 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1016 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1019 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1022 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
Fixes: cb7cf7be9e ("brcmfmac: make chip related functions host interface independent")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260217023043.73631-1-ethantidmore06@gmail.com
[add missing wifi: prefix]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260323074551.93530-1-pengpeng@iscas.ac.cn
[add missing wifi prefix]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull networking fixes from Paolo Abeni:
"Including fixes from IPsec, Bluetooth and netfilter
Current release - regressions:
- wifi: fix dev_alloc_name() return value check
- rds: fix recursive lock in rds_tcp_conn_slots_available
Current release - new code bugs:
- vsock: lock down child_ns_mode as write-once
Previous releases - regressions:
- core:
- do not pass flow_id to set_rps_cpu()
- consume xmit errors of GSO frames
- netconsole: avoid OOB reads, msg is not nul-terminated
- netfilter: h323: fix OOB read in decode_choice()
- tcp: re-enable acceptance of FIN packets when RWIN is 0
- udplite: fix null-ptr-deref in __udp_enqueue_schedule_skb().
- wifi: brcmfmac: fix potential kernel oops when probe fails
- phy: register phy led_triggers during probe to avoid AB-BA deadlock
- eth:
- bnxt_en: fix deleting of Ntuple filters
- wan: farsync: fix use-after-free bugs caused by unfinished tasklets
- xscale: check for PTP support properly
Previous releases - always broken:
- tcp: fix potential race in tcp_v6_syn_recv_sock()
- kcm: fix zero-frag skb in frag_list on partial sendmsg error
- xfrm:
- fix race condition in espintcp_close()
- always flush state and policy upon NETDEV_UNREGISTER event
- bluetooth:
- purge error queues in socket destructors
- fix response to L2CAP_ECRED_CONN_REQ
- eth:
- mlx5:
- fix circular locking dependency in dump
- fix "scheduling while atomic" in IPsec MAC address query
- gve: fix incorrect buffer cleanup for QPL
- team: avoid NETDEV_CHANGEMTU event when unregistering slave
- usb: validate USB endpoints"
* tag 'net-7.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
dpaa2-switch: validate num_ifs to prevent out-of-bounds write
net: consume xmit errors of GSO frames
vsock: document write-once behavior of the child_ns_mode sysctl
vsock: lock down child_ns_mode as write-once
selftests/vsock: change tests to respect write-once child ns mode
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
net/mlx5: Fix missing devlink lock in SRIOV enable error path
net/mlx5: E-switch, Clear legacy flag when moving to switchdev
net/mlx5: LAG, disable MPESW in lag_disable_change()
net/mlx5: DR, Fix circular locking dependency in dump
selftests: team: Add a reference count leak test
team: avoid NETDEV_CHANGEMTU event when unregistering slave
net: mana: Fix double destroy_workqueue on service rescan PCI path
MAINTAINERS: Update maintainer entry for QUALCOMM ETHQOS ETHERNET DRIVER
dpll: zl3073x: Remove redundant cleanup in devm_dpll_init()
selftests/net: packetdrill: Verify acceptance of FIN packets when RWIN is 0
tcp: re-enable acceptance of FIN packets when RWIN is 0
vsock: Use container_of() to get net namespace in sysctl handlers
net: usb: kaweth: validate USB endpoints
...
When probe of the sdio brcmfmac device fails for some reasons (i.e.
missing firmware), the sdiodev->bus is set to error instead of NULL, thus
the cleanup later in brcmf_sdio_remove() tries to free resources via
invalid bus pointer. This happens because sdiodev->bus is set 2 times:
first in brcmf_sdio_probe() and second time in brcmf_sdiod_probe(). Fix
this by chaning the brcmf_sdio_probe() function to return the error code
and set sdio->bus only there.
Fixes: 0ff0843310 ("wifi: brcmfmac: Add optional lpo clock enable support")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Arend van Spriel<arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20260203102133.1478331-1-m.szyprowski@samsung.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This converts some of the visually simpler cases that have been split
over multiple lines. I only did the ones that are easy to verify the
resulting diff by having just that final GFP_KERNEL argument on the next
line.
Somebody should probably do a proper coccinelle script for this, but for
me the trivial script actually resulted in an assertion failure in the
middle of the script. I probably had made it a bit _too_ trivial.
So after fighting that far a while I decided to just do some of the
syntactically simpler cases with variations of the previous 'sed'
scripts.
The more syntactically complex multi-line cases would mostly really want
whitespace cleanup anyway.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the exact same thing as the 'alloc_obj()' version, only much
smaller because there are a lot fewer users of the *alloc_flex()
interface.
As with alloc_obj() version, this was done entirely with mindless brute
force, using the same script, except using 'flex' in the pattern rather
than 'objs*'.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This was done entirely with mindless brute force, using
git grep -l '\<k[vmz]*alloc_objs*(.*, GFP_KERNEL)' |
xargs sed -i 's/\(alloc_objs*(.*\), GFP_KERNEL)/\1)/'
to convert the new alloc_obj() users that had a simple GFP_KERNEL
argument to just drop that argument.
Note that due to the extreme simplicity of the scripting, any slightly
more complex cases spread over multiple lines would not be triggered:
they definitely exist, but this covers the vast bulk of the cases, and
the resulting diff is also then easier to check automatically.
For the same reason the 'flex' versions will be done as a separate
conversion.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is the result of running the Coccinelle script from
scripts/coccinelle/api/kmalloc_objs.cocci. The script is designed to
avoid scalar types (which need careful case-by-case checking), and
instead replace kmalloc-family calls that allocate struct or union
object instances:
Single allocations: kmalloc(sizeof(TYPE), ...)
are replaced with: kmalloc_obj(TYPE, ...)
Array allocations: kmalloc_array(COUNT, sizeof(TYPE), ...)
are replaced with: kmalloc_objs(TYPE, COUNT, ...)
Flex array allocations: kmalloc(struct_size(PTR, FAM, COUNT), ...)
are replaced with: kmalloc_flex(*PTR, FAM, COUNT, ...)
(where TYPE may also be *VAR)
The resulting allocations no longer return "void *", instead returning
"TYPE *".
Signed-off-by: Kees Cook <kees@kernel.org>
Correct or add kernel-doc comments for:
- an enum name typo
- missing struct member comments in struct vif_saved_ie and
struct brcmf_cfg80211_vif
fixing these warnings:
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:195
Enum value 'BRCMF_VIF_STATUS_EAP_SUCCESS' not described in enum
'brcmf_vif_status'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:195
Excess enum value '@BRCMF_VIF_STATUS_EAP_SUCCUSS' description in
'brcmf_vif_status'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:220
struct member 'assoc_req_ie' not described in 'vif_saved_ie'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:220
struct member 'assoc_req_ie_len' not described in 'vif_saved_ie'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:255
struct member 'saved_ie' not described in 'brcmf_cfg80211_vif'
Warning: drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.h:255
struct member 'is_11d' not described in 'brcmf_cfg80211_vif'
kernel-doc warnings for missing struct member descriptions in struct
brcmf_cfg80211_info and struct brcmf_cfg80211_profile are still present.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20251129073803.1814384-1-rdunlap@infradead.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The Acer A1 840 tablet contains quite generic names in the sys_vendor and
product_name DMI strings, without this patch brcmfmac will try to load:
brcmfmac43340-sdio.Insyde-BayTrail.txt as nvram file which is a bit
too generic.
Add a DMI quirk so that a unique and clearly identifiable nvram file name
is used on the Acer A1 840 tablet.
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Link: https://patch.msgid.link/20251103100314.353826-1-hansg@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, whenever there is a need to transmit an Action frame,
the brcmfmac driver always uses the P2P vif to send the "actframe" IOVAR to
firmware. The P2P interfaces were available when wpa_supplicant is managing
the wlan interface.
However, the P2P interfaces are not created/initialized when only hostapd
is managing the wlan interface. And if hostapd receives an ANQP Query REQ
Action frame even from an un-associated STA, the brcmfmac driver tries
to use an uninitialized P2P vif pointer for sending the IOVAR to firmware.
This NULL pointer dereferencing triggers a driver crash.
[ 1417.074538] Unable to handle kernel NULL pointer dereference at virtual
address 0000000000000000
[...]
[ 1417.075188] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT)
[...]
[ 1417.075653] Call trace:
[ 1417.075662] brcmf_p2p_send_action_frame+0x23c/0xc58 [brcmfmac]
[ 1417.075738] brcmf_cfg80211_mgmt_tx+0x304/0x5c0 [brcmfmac]
[ 1417.075810] cfg80211_mlme_mgmt_tx+0x1b0/0x428 [cfg80211]
[ 1417.076067] nl80211_tx_mgmt+0x238/0x388 [cfg80211]
[ 1417.076281] genl_family_rcv_msg_doit+0xe0/0x158
[ 1417.076302] genl_rcv_msg+0x220/0x2a0
[ 1417.076317] netlink_rcv_skb+0x68/0x140
[ 1417.076330] genl_rcv+0x40/0x60
[ 1417.076343] netlink_unicast+0x330/0x3b8
[ 1417.076357] netlink_sendmsg+0x19c/0x3f8
[ 1417.076370] __sock_sendmsg+0x64/0xc0
[ 1417.076391] ____sys_sendmsg+0x268/0x2a0
[ 1417.076408] ___sys_sendmsg+0xb8/0x118
[ 1417.076427] __sys_sendmsg+0x90/0xf8
[ 1417.076445] __arm64_sys_sendmsg+0x2c/0x40
[ 1417.076465] invoke_syscall+0x50/0x120
[ 1417.076486] el0_svc_common.constprop.0+0x48/0xf0
[ 1417.076506] do_el0_svc+0x24/0x38
[ 1417.076525] el0_svc+0x30/0x100
[ 1417.076548] el0t_64_sync_handler+0x100/0x130
[ 1417.076569] el0t_64_sync+0x190/0x198
[ 1417.076589] Code: f9401e80 aa1603e2 f9403be1 5280e483 (f9400000)
Fix this, by always using the vif corresponding to the wdev on which the
Action frame Transmission request was initiated by the userspace. This way,
even if P2P vif is not available, the IOVAR is sent to firmware on AP vif
and the ANQP Query RESP Action frame is transmitted without crashing the
driver.
Move init_completion() for "send_af_done" from brcmf_p2p_create_p2pdev()
to brcmf_p2p_attach(). Because the former function would not get executed
when only hostapd is managing wlan interface, and it is not safe to do
reinit_completion() later in brcmf_p2p_tx_action_frame(), without any prior
init_completion().
And in the brcmf_p2p_tx_action_frame() function, the condition check for
P2P Presence response frame is not needed, since the wpa_supplicant is
properly sending the P2P Presense Response frame on the P2P-GO vif instead
of the P2P-Device vif.
Cc: stable@vger.kernel.org
Fixes: 18e2f61db3 ("brcmfmac: P2P action frame tx")
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20251013102819.9727-1-gokulkumar.sivakumar@infineon.com
[Cc stable]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Johannes Berg says:
====================
Plenty of things going on, notably:
- iwlwifi: major cleanups/rework
- brcmfmac: gets AP isolation support
- mac80211: gets more S1G support
* tag 'wireless-next-2025-09-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (94 commits)
wifi: mwifiex: fix endianness handling in mwifiex_send_rgpower_table
wifi: cfg80211: Remove the redundant wiphy_dev
wifi: mac80211: fix incorrect comment
wifi: cfg80211: update the time stamps in hidden ssid
wifi: mac80211: Fix HE capabilities element check
wifi: mac80211: add tx_handlers_drop statistics to ethtool
wifi: mac80211: fix reporting of all valid links in sta_set_sinfo()
wifi: iwlwifi: mld: CHANNEL_SURVEY_NOTIF is always supported
wifi: iwlwifi: mld: remove support of iwl_esr_mode_notif version 1
wifi: iwlwifi: mld: remove support from of sta cmd version 1
wifi: iwlwifi: mld: remove support of roc cmd version 5
wifi: iwlwifi: mld: remove support of mac cmd ver 2
wifi: iwlwifi: mld: don't consider phy cmd version 5
wifi: iwlwifi: implement wowlan status notification API update
wifi: iwlwifi: fw: Add ASUS to PPAG and TAS list
wifi: iwlwifi: add kunit tests for nvm parse
wifi: iwlwifi: api: add a flag to iwl_link_ctx_modify_flags
wifi: iwlwifi: pcie: move ltr_enabled to the specific transport
wifi: iwlwifi: pcie: move pm_support to the specific transport
wifi: iwlwifi: rename iwl_finish_nic_init
...
====================
Link: https://patch.msgid.link/20250911100854.20445-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hostapd & wpa_supplicant userspace daemons exposes an AP mode specific
config file parameter "ap_isolate" to the user, which is used to control
low-level bridging of frames between the stations associated in the BSS.
In driver, handle this user setting in the newly defined cfg80211_ops
function brcmf_cfg80211_change_bss() by enabling "ap_isolate" IOVAR in
the firmware.
In AP mode, the "ap_isolate" value from the cfg80211 layer represents,
0 = allow low-level bridging of frames between associated stations
1 = restrict low-level bridging of frames to isolate associated stations
-1 = do not change existing setting
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Signed-off-by: Gokul Sivakumar <gokulkumar.sivakumar@infineon.com>
[arend: indicate ap_isolate support in struct wiphy::bss_param_support]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250817190435.1495094-5-arend.vanspriel@broadcom.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
