Pull networking fixes from Jakub Kicinski:
"Lots of fixes, double the count even for the 'new normal'. Largely due
to my time off followed by a networking conference which distracted
most maintainers (less so the AI generators).
Including fixes from Bluetooth and WiFi.
Current release - regressions:
- wifi: mt76: fix MAC address for non OF pcie cards
Current release - new code bugs:
- mptcp: fix BUILD_BUG_ON on legacy ARM config
- wifi: cfg80211: guard optional PMSR nominal time
Previous releases - regressions:
- qrtr: ns: raise node count limit to 512, we arbitrarily picked
256 as a limit, turns out it was too low for real world deployments
- vhost-net: fix TX stall when vhost owns virtio-net header
- eth: amd-xgbe: fix MAC_AUTO_SW handling in CL37 AN
- wifi: ath12k: fix low MLO RX throughput on WCN7850
Previous releases - always broken:
- number of random AI fixes for SCTP, RDS and TIPC protocols
- more AI-looking fixes for WiFi drivers
- number of fixes for missing pointer reloading after skb pull
- reject BPF redirect use from qdisc qevent block
- tcp: initialize standalone TCP-AO response padding
- vsock/virtio: collapse receive queue under memory pressure to avoid
client OOMing the host with tiny messages
- ipv4: icmp: fill flow parameters in icmp_route_lookup decoy lookup,
make sure the ICMP response routing follows the routing policy
- gro: fix double aggregation of flush-marked skbs
- ovpn: fix various refcount bugs
- tls: device: push pending open record on splice EOF
- eth: mlx5:
- use sender devcom for MPV master-up
- fix MCIA register buffer overflow on 32 dword reads"
* tag 'net-7.2-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (234 commits)
drop_monitor: perform u64_stats updates under IRQ-disabled section
drop_monitor: fix size calculations for 64-bit attributes
net: drop_monitor: fix info leak in NET_DM_ATTR_PAYLOAD
mptcp: fix BUILD_BUG_ON on legacy ARM config
selftests: mptcp: userspace_pm: fix undefined variable port
mptcp: fix stale skb->sk reference on subflow close
mptcp: pm: userspace: fix use-after-free in get_local_id
mptcp: decrement subflows counter on failed passive join
mac802154: hold an interface reference across the scan worker
sctp: don't free the ASCONF's own transport in DEL-IP processing
phonet: check register_netdevice_notifier() error in phonet_device_init()
phonet: pep: fix use-after-free in pep_get_sb()
bnge/bng_re: fix ring ID widths
tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream()
net: airoha: fix ETS channel derivation in airoha_tc_setup_qdisc_ets()
mctp: check register_netdevice_notifier() error in mctp_device_init()
ptp: netc: explicitly clear TMR_OFF during initialization
rds: tcp: unregister sysctl before tearing down listen socket
ipv6: Change allocation flags to match rcu_read_lock section requirements
net: slip: serialize receive against buffer reallocation
...
ev variable is userspace controlled via event->attr.config and used
as an array index after bounds checking, but without speculation
barriers.
Add the missing array_index_nospec() call to prevent speculative
execution.
Cc: stable@vger.kernel.org
Fixes: 212188a596 ("[S390] perf: add support for s390x CPU counters")
Signed-off-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Thomas Richter <tmricht@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The vDSO needs to have a unique build id in a similar manner
to the kernel and modules. Use the build salt macro.
Signed-off-by: Bastian Blank <waldi@debian.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
'level' is user space controlled and used to read from an array. Add the
missing array_index_nospec() call to prevent speculative execution.
Cc: stable@vger.kernel.org
Fixes: 0d30871739 ("s390/diag: Add memory topology information via diag310")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Mete Durlu <meted@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Heiko Carstens says:
===================
This is supposed to improve s390 idle time accounting, and brings it
back to the state it was before arch_cpu_idle_time() was removed from
s390 [3].
In result all cpu time accounting is done by the s390 architecture backend
again, instead of having a mix of architecure specific and common code
accounting (common code: idle, s390 architecture: everything else).
===================
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Pull s390 updates from Alexander Gordeev:
- Use CIO device online variable instead of the internal FSM state to
determine device availability during purge operations
- Remove extra check of task_stack_page() because try_get_task_stack()
already takes care of that when reading /proc/<pid>/wchan
- Allow user-space to use the new SCLP action qualifier 4 for to
provide NVMe SMART log data to the platform.
- Send AP CHANGE uevents on successful bind and successful association
to notify user-space about SE operations on AP queue devices
- Add an s390dbf kernel parameter to configure debug log levels and
area sizes during early boot
- On arm64 the empty zero page is going to be mapped read-only. Do the
same for s390 with an explicit set_memory_ro() call
- Improve s390-specific bcr_serialize() and cpu_relax() implementations
- Remove all unused variables to avoid allmodconfig W=1 build fails
with latest clang-23
- Cleanup default Kconfig values for s390 selftests
- Add a s390-tod trace clock to allow comparing trace timestamps
between different systems or virtual machines on s390
- Remove the s390 implementation of strlcat() in favor of the generic
variant
- Make consistent the calling order between
page_table_check_pte_clear() and secure page conversion across all
code paths
- Rearrange some fields within AP and zcrypt structs to reduce memory
consumption and unused holes
- Shorten GR_NUM and VX_NUM macros and move them to a separate header
- Replace __get_free_page() with kmalloc() in few sources
- Introduce an infrastructure for more efficient this_cpu operations.
Eliminate conditional branches when PREEMPT_NONE is removed
- Enable Rust support
- Use z10 as minimum architecture level, similar to the boot code, to
enforce a defined architecture level set
- Improve and convert various mem*() helper functions to C. For that
add .noinstr.text section to avoid orphaned warnings from the linker
- Fix the function pointer type in __ret_from_fork() to correct the
indirect call to match kernel thread return type of int
- Revert support for DCACHE_WORD_ACCESS to avoid an endless exception
loop on read from donated Ultravisor pages at unaligned addresses
* tag 's390-7.2-1' of gitolite.kernel.org:pub/scm/linux/kernel/git/s390/linux: (52 commits)
s390: Revert support for DCACHE_WORD_ACCESS
s390/process: Fix kernel thread function pointer type
s390/tishift: Convert __ashlti3(), __ashrti3(), __lshrti3() to C
s390/memmove: Optimize backward copy case
s390/string: Convert memset(16|32|64)() to C
s390/string: Convert memcpy() to C
s390/string: Convert memset() to C
s390/string: Convert memmove() to C
s390/string: Add -ffreestanding compile option to string.o
s390: Add .noinstr.text to boot and purgatory linker scripts
s390/purgatory: Enforce z10 minimum architecture level
s390: Enable Rust support
s390/cmpxchg: Fix KASAN stack-out-of-bounds in atomic helpers
rust: helpers: Add memchr wrapper for string operations
rust/bindgen_parameters: Mark s390 types as opaque to prevent repr conflicts
s390/jump_label: Implement ARCH_STATIC_BRANCH_JUMP_ASM and ARCH_STATIC_BRANCH_ASM macros
s390/bug: Provide ARCH_WARN_ASM for Rust WARN/BUG support
s390/ap: Fix locking issue in SE bind and associate sysfs functions
s390/percpu: Provide arch_this_cpu_write() implementation
s390/percpu: Provide arch_this_cpu_read() implementation
...
Remove the s390 specific idle_time_us and idle_count per cpu sysfs
files. They do not provide any additional value. The risk that there
are existing applications which rely on these architecture specific
files should be very low.
However if it turns out such applications exist, this can be easily
reverted.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The former s390 specific arch_cpu_idle_time() implementation was
removed, since its implementation was racy and reported idle time
could go backwards [1].
However this removal was not necessary, since independently of the s390
architecture specific races there exists the iowait counter update race,
which can also lead to reported idle time going backwards [2].
With Frederic Weisbecker's recent cpu idle time accounting refactoring
kernel_cpustat got a sequence counter. Use this to implement s390 specific
variants of kcpustat_field_idle() and kcpustat_field_iowait(). This is
logically a revert of [1] and moves cpu idle time accounting back into s390
architecture code, which is also more precise than the dyntick idle time
accounting by nohz/scheduler.
For comparing cross cpu time stamps it is necessary to use the stcke
instead of the stckf instruction in irq entry path. Furthermore this
open-codes a sequence lock in assembler and C code, which is required to
update the irq entry time stamp to the per cpu idle_data structure in a
race free manner.
[1] commit be76ea6144 ("s390/idle: remove arch_cpu_idle_time() and corresponding code")
[2] commit ead70b7523 ("timers/nohz: Add a comment about broken iowait counter update race")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The upcoming cpu idle time accounting rework involves comparing and
subtracting cross cpu time stamps. Time stamps created with the stckf
instruction monotonic with respect to the local cpu. For cross cpu
monotonic time stamps the slightly slower stcke instruction has to
be used [1].
Convert the idle time accounting relevant usages of stckf to stcke.
[1] Principles of Operation - Setting and Inspecting the Clock
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
In case of a kernel thread __ret_from_fork() calls the specified function
indirectly. Fix the kernel thread function pointer, since kernel threads
return an int instead of void.
Fixes: 56e62a7370 ("s390: convert to generic entry")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With the intended removal of PREEMPT_NONE this_cpu operations based on
atomic instructions, guarded with preempt_disable()/preempt_enable() pairs
become more expensive: the preempt_disable() / preempt_enable() pairs are
not optimized away anymore during compile time.
In particular the conditional call to preempt_schedule_notrace() after
preempt_enable() adds additional code and register pressure.
E.g. this simple C code sequence
DEFINE_PER_CPU(long, foo);
long bar(long a) { return this_cpu_add_return(foo, a); }
generates this code:
11a976: eb af f0 68 00 24 stmg %r10,%r15,104(%r15)
11a97c: b9 04 00 ef lgr %r14,%r15
11a980: b9 04 00 b2 lgr %r11,%r2
11a984: e3 f0 ff c8 ff 71 lay %r15,-56(%r15)
11a98a: e3 e0 f0 98 00 24 stg %r14,152(%r15)
11a990: eb 01 03 a8 00 6a asi 936,1 <- __preempt_count_add(1)
11a996: c0 10 00 d2 ac b5 larl %r1,1b70300 <- address of percpu var
11a9a0: e3 10 23 b8 00 08 ag %r1,952 <- add percpu offset
11a9a6: eb ab 10 00 00 e8 laag %r10,%r11,0(%r1) <- atomic op
11a9ac: eb ff 03 a8 00 6e alsi 936,-1 <- __preempt_count_dec_and_test()
11a9b2: a7 54 00 05 jnhe 11a9bc <bar+0x4c>
11a9b6: c0 e5 00 76 d1 bd brasl %r14,ff4d30 <preempt_schedule_notrace>
11a9bc: b9 e8 b0 2a agrk %r2,%r10,%r11
11a9c0: eb af f0 a0 00 04 lmg %r10,%r15,160(%r15)
11a9c6 07 fe br %r14
Even though the above example is more or less the worst case, since the
branch to preempt_schedule_notrace() requires a stackframe, which
otherwise wouldn't be necessary, there is also the conditional jnhe branch
instruction.
Get rid of the conditional branch with the following code sequence:
11a8e6: c0 30 00 d0 c5 0d larl %r3,1b33300
11a8ec: b9 04 00 43 lgr %r4,%r3
11a8f0: eb 00 43 c0 00 52 mviy 960,4
11a8f6: e3 40 03 b8 00 08 ag %r4,952
11a8fc: eb 52 40 00 00 e8 laag %r5,%r2,0(%r4)
11a902: eb 00 03 c0 00 52 mviy 960,0
11a908: b9 08 00 25 agr %r2,%r5
11a90c 07 fe br %r14
The general idea is that this_cpu operations based on atomic instructions
are guarded with mviy instructions:
- The first mviy instruction writes the register number, which contains
the percpu address variable to lowcore. This also indicates that a
percpu code section is executed.
- The first instruction following the mviy instruction must be the ag
instruction which adds the percpu offset to the percpu address register.
- Afterwards the atomic percpu operation follows.
- Then a second mviy instruction writes a zero to lowcore, which indicates
the end of the percpu code section.
- In case of an interrupt/exception/nmi the register number which was
written to lowcore is copied to the exception frame (pt_regs), and a zero
is written to lowcore.
- On return to the previous context it is checked if a percpu code section
was executed (saved register number not zero), and if the process was
migrated to a different cpu. If the percpu offset was already added to
the percpu address register (instruction address does _not_ point to the
ag instruction) the content of the percpu address register is adjusted so
it points to percpu variable of the new cpu.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Currently the tick subsystem stores the idle cputime accounting in private
fields, allowing cohabitation with architecture idle vtime accounting. The
former is fetched on online CPUs, the latter on offline CPUs.
For consolidation purposes, architecture vtime accounting will continue to
account the cputime but will make a break when the idle tick is
stopped. The dyntick cputime accounting will then be relayed by the tick
subsystem so that the idle cputime is still seen advancing coherently even
when the tick isn't there to flush the idle vtime.
Prepare for that and introduce three new APIs which will be used in
subsequent patches:
- vtime_dynticks_start() is deemed to be called when idle enters in
dyntick mode. The idle cputime that elapsed so far is accumulated
and accounted. Also idle time accounting is ignored.
- vtime_dynticks_stop() is deemed to be called when idle exits from
dyntick mode. The vtime entry clocks are fast-forward to current time
so that idle accounting restarts elapsing from now. Also idle time
accounting is resumed.
- vtime_reset() is deemed to be called from dynticks idle IRQ entry to
fast-forward the clock to current time so that the IRQ time is still
accounted by vtime while nohz cputime is paused.
Also accumulated vtime won't be flushed from dyntick-idle ticks to avoid
accounting twice the idle cputime, along with nohz accounting.
Co-developed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260508131647.43868-7-frederic@kernel.org
In order to allow comparing trace timestamps between different
systems or virtual machines on s390, add a s390-tod trace clock.
This clock just uses the returned TOD clock value from stcke
directly.
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
allmodconfig with clang W=1 points out an unused global variable:
arch/s390/kernel/debug.c:1237:33: error: variable
's390dbf_sysctl_header' set but not used [-Werror,-Wunused-but-set-global]
Just remove the variable. There is no point in adding error handling for a
failing register_sysctl() call.
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Start the numbering scheme for higher-level topology structures (like
socket, book, drawer) at zero, matching the convention for other hardware
identifiers like e.g. CPU numbers.
Hardware documentation, the Hardware Management Console and other tools
like zmemtopo also use zero-based numbering for these containing entities.
Aligning the numbering in sysfs, procfs, and tools like lscpu improves
user experience by making it easier to correlate topology information
across different interfaces.
If available, Linux on s390 derives this physical topology information from
the stsi function code 15 store_topology instruction, which is defined to
start at 1 for the lowest numbered container id. Subtract one, so
drawer_id, book_id and socket_id in cpu_topology[] start with 0 for the
lowest numbered entity; and /proc/cpuinfo and tools like 'lscpu -ye'
display the expected values.
Display only, no functional change intended.
Example: In a partition with 3 cores in a system with
8 cores per socket; 2 sockets per book; 4 books per dawer; and 4 drawers:
Before this fix:
$ lscpu -ye
CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2 ONLINE CONFIGURED POLARIZATION ADDRESS
0 0 2 4 1 0 0:0:0 yes yes vert-high 0
1 0 2 4 1 0 1:1:1 yes yes vert-high 1
2 0 2 4 1 1 2:2:2 yes yes vert-medium 2
3 0 2 4 1 1 3:3:3 yes yes vert-medium 3
4 0 2 4 2 3 4:4:4 yes yes vert-low 4
5 0 2 4 2 3 5:5:5 yes yes vert-low 5
After this fix:
$ lscpu -ye
CPU NODE DRAWER BOOK SOCKET CORE L1d:L1i:L2 ONLINE CONFIGURED POLARIZATION ADDRESS
0 0 1 3 0 0 0:0:0 yes yes vert-high 0
1 0 1 3 0 0 1:1:1 yes yes vert-high 1
2 0 1 3 0 1 2:2:2 yes yes vert-medium 2
3 0 1 3 0 1 3:3:3 yes yes vert-medium 3
4 0 1 3 1 3 4:4:4 yes yes vert-low 4
5 0 1 3 1 3 5:5:5 yes yes vert-low 5
For KVM guests, qemu emulates the stsi FC15 store_topology instruction.
This emulation currently erroneously starts id numbering at 0. A qemu fix
is proposed that makes this emulation compliant to the stsi architecture.
In case a guest with this patch is running on a qemu without the other fix,
it can happen that ids of 255 are displayed erroneously.
z/VM currently does not provide or emulate physical topology information to
its guests. So this patch does not change anything for z/VM guests.
Fixes: 10d3858950 ("[S390] topology: expose core identifier")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Problem determination using s390dbf logging sometimes requires changing
the default logging level or log area size. While this is possible
using sysfs interfaces, there is no easy way to adjust these parameters
for early boot code that emits logs before userspace is available.
Add an s390dbf kernel parameter to address this shortcoming. The
parameter can be used to specify log level and area size (in units of
pages). A level of '-' turns logging off for an area. Logs can be
identified by name or a shell-style pattern.
Parameter format:
s390dbf=<name|pattern>:[<level>|-]:[<pages>][,...]
Example:
s390dbf=cio*:6:128,sclp_err::2
Specified parameters are applied immediately during debug area
registration for regular log areas. For early, static debug areas,
log levels are changed during early_param() parsing, while size
changes are applied at arch_initcall-time.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Machines with a larger number of CPUs and under heavy load sometimes
loose PAI counter increments during recording using events
-e CRYPTO_ÂLL or -e NNPA_ALL. Counting is not affected.
This happens when several PAI crypto counters are incremented during
the same cryptographic operation.
During schedule out the functions
paiXXX_sched_task() (with XXX either crypt or ext)
+--> pai_have_samples()
+--> pai_have_sample()
+--> pai_copy()
+--> pai_push_sample()
are called to read out PAI counter values.
In pai_copy() the current values of PAI counters are read from the
PMU memory mapped page and compared to the values read during last
schedule out operation, which have been saved in a backup page
named PAI_SAVE_AREA(event). For each PAI counter a delta is calculated
and when the delta is positive, that PAI counter was incremented by
hardware. This positve delta is reported as raw data record attached
to a sample.
After all deltas have been calculated, the new PAI counter values
are saved in the backup page PAI_SAVE_AREA(event). However this is
done in pai_push_sample(), leaving a small window for missing hardware
triggered updates. Here is one scenario:
PAI counter idx: 0 1 2 3 4 5 6 7 .... N
+---+---+---+---+---+---+---+---+ +---+
PAI counter page:| | | X | | | | | |....| Y |
+---+---+---+---+---+---+---+---+ +---+
In pai_copy() each PAI counter value is read and compared
to its old value. This is done in a loop. When PAI counter indexed
N is read, the hardware might increment PAI counter indexed 2 again,
updating its value from X to X+1.
Later pai_push_sample() simply mem-copies the complete PAI counter
page to a backup page and the increment of X+1 is lost, because the
backup page now contains the new value.
Read each PAI counter and save this value in the backup page when
there is a positive delta. This omits any time window between read
and store. This also reduced the work load as only modified PAI
counters are saved.
Cc: stable@vger.kernel.org
Fixes: fe861b0c8d ("s390/pai: save PAI counter value page in event structure")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
There is no need to call task_stack_page(),
because try_get_task_stack() already takes care of that.
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The PAI crypto counter design allows for user space and kernel space
PAI counter increment recording. This is achieved by splitting the
recording page in half. The upper part of the 4KB page records user
space increments of PAI crypto counter and the lower half records
kernel space increments. The page itself looks like:
lowcore ptr ---> ++++++++++++++++++++++++
|user space area |
+----------------------+
|kernel space area |
++++++++++++++++++++++++
User space and kernel space entries are handled via a kernel_offset
value when wrting. For PAI crypto counters this offset is 2048 or
half of a page size.
For PAI NNPA counter design this distinction was not needed. There is
no user and kernel space part for the page pointed to by lowcore.
The set up is:
lowcore ptr ---> ++++++++++++++++++++++++
|user + kernel space |
|area |
| |
++++++++++++++++++++++++
There is always only one counter value recorded and saved.
Depending on number of CPUs and machine load, the number of PAI NNPA
counter increment differs between counting (perf stat) and recording
(perf record). The number reported by sampling was double the number
shown by counting.
This was caused by a double read of the PAI NNPA values in function
pai_copy(). The first part of that function reads the kernel space part.
The offset into the kernel page part must be larger than zero.
The second part of that function reads the user space part, which
begins of offset zero. This works fine for PAI crypto counters.
It fails for PAI NNPA counters because the PMU device driver does
not support that feature and has a kernel_offset value of 0x0.
Executing both user and kernel space read out might end up reading
user space value twice.
For the PAI NNPA PMU prohibit the kernel space part read out.
Cc: stable@vger.kernel.org
Fixes: f124735413 ("s390/pai_crypto: Rename paicrypt_copy() to pai_copy()")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
debug_input_flush_fn() always copies one byte from the userspace buffer
with copy_from_user() regardless of the supplied write length. A
zero-length write therefore reads one byte beyond the caller's buffer.
If the stale byte happens to be '-' or a digit the debug log is
silently flushed. With an unmapped buffer the call returns -EFAULT.
Reject zero-length writes before copying from userspace.
Cc: stable@vger.kernel.org # v5.10+
Acked-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Pull integrity updates from Mimi Zohar:
"There are two main changes, one feature removal, some code cleanup,
and a number of bug fixes.
Main changes:
- Detecting secure boot mode was limited to IMA. Make detecting
secure boot mode accessible to EVM and other LSMs
- IMA sigv3 support was limited to fsverity. Add IMA sigv3 support
for IMA regular file hashes and EVM portable signatures
Remove:
- Remove IMA support for asychronous hash calculation originally
added for hardware acceleration
Cleanup:
- Remove unnecessary Kconfig CONFIG_MODULE_SIG and CONFIG_KEXEC_SIG
tests
- Add descriptions of the IMA atomic flags
Bug fixes:
- Like IMA, properly limit EVM "fix" mode
- Define and call evm_fix_hmac() to update security.evm
- Fallback to using i_version to detect file change for filesystems
that do not support STATX_CHANGE_COOKIE
- Address missing kernel support for configured (new) TPM hash
algorithms
- Add missing crypto_shash_final() return value"
* tag 'integrity-v7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
evm: Enforce signatures version 3 with new EVM policy 'bit 3'
integrity: Allow sigv3 verification on EVM_XATTR_PORTABLE_DIGSIG
ima: add support to require IMA sigv3 signatures
ima: add regular file data hash signature version 3 support
ima: Define asymmetric_verify_v3() to verify IMA sigv3 signatures
ima: remove buggy support for asynchronous hashes
integrity: Eliminate weak definition of arch_get_secureboot()
ima: Add code comments to explain IMA iint cache atomic_flags
ima_fs: Correctly create securityfs files for unsupported hash algos
ima: check return value of crypto_shash_final() in boot aggregate
ima: Define and use a digest_size field in the ima_algo_desc structure
powerpc/ima: Drop unnecessary check for CONFIG_MODULE_SIG
ima: efi: Drop unnecessary check for CONFIG_MODULE_SIG/CONFIG_KEXEC_SIG
ima: fallback to using i_version to detect file change
evm: fix security.evm for a file with IMA signature
s390: Drop unnecessary CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT
evm: Don't enable fix mode when secure boot is enabled
integrity: Make arch_ima_get_secureboot integrity-wide
Pull bpf updates from Alexei Starovoitov:
- Welcome new BPF maintainers: Kumar Kartikeya Dwivedi, Eduard
Zingerman while Martin KaFai Lau reduced his load to Reviwer.
- Lots of fixes everywhere from many first time contributors. Thank you
All.
- Diff stat is dominated by mechanical split of verifier.c into
multiple components:
- backtrack.c: backtracking logic and jump history
- states.c: state equivalence
- cfg.c: control flow graph, postorder, strongly connected
components
- liveness.c: register and stack liveness
- fixups.c: post-verification passes: instruction patching, dead
code removal, bpf_loop inlining, finalize fastcall
8k line were moved. verifier.c still stands at 20k lines.
Further refactoring is planned for the next release.
- Replace dynamic stack liveness with static stack liveness based on
data flow analysis.
This improved the verification time by 2x for some programs and
equally reduced memory consumption. New logic is in liveness.c and
supported by constant folding in const_fold.c (Eduard Zingerman,
Alexei Starovoitov)
- Introduce BTF layout to ease addition of new BTF kinds (Alan Maguire)
- Use kmalloc_nolock() universally in BPF local storage (Amery Hung)
- Fix several bugs in linked registers delta tracking (Daniel Borkmann)
- Improve verifier support of arena pointers (Emil Tsalapatis)
- Improve verifier tracking of register bounds in min/max and tnum
domains (Harishankar Vishwanathan, Paul Chaignon, Hao Sun)
- Further extend support for implicit arguments in the verifier (Ihor
Solodrai)
- Add support for nop,nop5 instruction combo for USDT probes in libbpf
(Jiri Olsa)
- Support merging multiple module BTFs (Josef Bacik)
- Extend applicability of bpf_kptr_xchg (Kaitao Cheng)
- Retire rcu_trace_implies_rcu_gp() (Kumar Kartikeya Dwivedi)
- Support variable offset context access for 'syscall' programs (Kumar
Kartikeya Dwivedi)
- Migrate bpf_task_work and dynptr to kmalloc_nolock() (Mykyta
Yatsenko)
- Fix UAF in in open-coded task_vma iterator (Puranjay Mohan)
* tag 'bpf-next-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (241 commits)
selftests/bpf: cover short IPv4/IPv6 inputs with adjust_room
bpf: reject short IPv4/IPv6 inputs in bpf_prog_test_run_skb
selftests/bpf: Use memfd_create instead of shm_open in cgroup_iter_memcg
selftests/bpf: Add test for cgroup storage OOB read
bpf: Fix OOB in pcpu_init_value
selftests/bpf: Fix reg_bounds to match new tnum-based refinement
selftests/bpf: Add tests for non-arena/arena operations
bpf: Allow instructions with arena source and non-arena dest registers
bpftool: add missing fsession to the usage and docs of bpftool
docs/bpf: add missing fsession attach type to docs
bpf: add missing fsession to the verifier log
bpf: Move BTF checking logic into check_btf.c
bpf: Move backtracking logic to backtrack.c
bpf: Move state equivalence logic to states.c
bpf: Move check_cfg() into cfg.c
bpf: Move compute_insn_live_regs() into liveness.c
bpf: Move fixup/post-processing logic from verifier.c into fixups.c
bpf: Simplify do_check_insn()
bpf: Move checks for reserved fields out of the main pass
bpf: Delete unused variable
...
Pull module updates from Sami Tolvanen:
"Kernel symbol flags:
- Replace the separate *_gpl symbol sections (__ksymtab_gpl and
__kcrctab_gpl) with a unified symbol table and a new __kflagstab
section.
This section stores symbol flags, such as the GPL-only flag, as an
8-bit bitset for each exported symbol. This is a cleanup that
simplifies symbol lookup in the module loader by avoiding table
fragmentation and will allow a cleaner way to add more flags later
if needed.
Module signature UAPI:
- Move struct module_signature to the UAPI headers to allow reuse by
tools outside the kernel proper, such as kmod and
scripts/sign-file.
This also renames a few constants for clarity and drops unused
signature types as preparation for hash-based module integrity
checking work that's in progress.
Sysfs:
- Add a /sys/module/<module>/import_ns sysfs attribute to show the
symbol namespaces imported by loaded modules.
This makes it easier to verify driver API access at runtime on
systems that care about such things (e.g. Android).
Cleanups and fixes:
- Force sh_addr to 0 for all sections in module.lds. This prevents
non-zero section addresses when linking modules with 'ld.bfd -r',
which confused elfutils.
- Fix a memory leak of charp module parameters on module unload when
the kernel is configured with CONFIG_SYSFS=n.
- Override the -EEXIST error code returned by module_init() to
userspace. This prevents confusion with the errno reserved by the
module loader to indicate that a module is already loaded.
- Simplify the warning message and drop the stack dump on positive
returns from module_init().
- Drop unnecessary extern keywords from function declarations and
synchronize parse_args() arguments with their implementation"
* tag 'modules-7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/modules/linux: (23 commits)
module: Simplify warning on positive returns from module_init()
module: Override -EEXIST module return
documentation: remove references to *_gpl sections
module: remove *_gpl sections from vmlinux and modules
module: deprecate usage of *_gpl sections in module loader
module: use kflagstab instead of *_gpl sections
module: populate kflagstab in modpost
module: add kflagstab section to vmlinux and modules
module: define ksym_flags enumeration to represent kernel symbol flags
selftests/bpf: verify_pkcs7_sig: Use 'struct module_signature' from the UAPI headers
sign-file: use 'struct module_signature' from the UAPI headers
tools uapi headers: add linux/module_signature.h
module: Move 'struct module_signature' to UAPI
module: Give MODULE_SIG_STRING a more descriptive name
module: Give 'enum pkey_id_type' a more specific name
module: Drop unused signature types
extract-cert: drop unused definition of PKEY_ID_PKCS7
docs: symbol-namespaces: mention sysfs attribute
module: expose imported namespaces via sysfs
module: Remove extern keyword from param prototypes
...
Pull hardening updates from Kees Cook:
- randomize_kstack: Improve implementation across arches (Ryan Roberts)
- lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
- refcount: Remove unused __signed_wrap function annotations
* tag 'hardening-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lkdtm/fortify: Drop unneeded FORTIFY_STR_OBJECT test
refcount: Remove unused __signed_wrap function annotations
randomize_kstack: Unify random source across arches
randomize_kstack: Maintain kstack_offset per task
Pull s390 fixes from Vasily Gorbik:
- Fix a memory leak in the zcrypt driver where the AP message buffer
for clear key RSA requests was allocated twice, once by the caller
and again locally, causing the first allocation to never be freed
- Fix the cpum_sf perf sampling rate overflow adjustment to clamp the
recalculated rate to the hardware maximum, preventing exceptions on
heavily loaded systems running with HZ=1000
* tag 's390-7.0-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Fix memory leak with CCA cards used as accelerator
s390/cpum_sf: Cap sampling rate to prevent lsctl exception
Pull s390 fixes from Vasily Gorbik:
- Add array_index_nospec() to syscall dispatch table lookup to prevent
limited speculative out-of-bounds access with user-controlled syscall
number
- Mark array_index_mask_nospec() __always_inline since GCC may emit an
out-of-line call instead of the inline data dependency sequence the
mitigation relies on
- Clear r12 on kernel entry to prevent potential speculative use of
user value in system_call, ext/io/mcck interrupt handlers
* tag 's390-7.0-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/entry: Scrub r12 register on kernel entry
s390/syscalls: Add spectre boundary for syscall dispatch table
s390/barrier: Make array_index_mask_nospec() __always_inline
Before commit f33f2d4c7c ("s390/bp: remove TIF_ISOLATE_BP"),
all entry handlers loaded r12 with the current task pointer
(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That
commit removed TIF_ISOLATE_BP, dropping both the branch prediction
macros and the r12 load, but did not add r12 to the register clearing
sequence.
Add the missing xgr %r12,%r12 to make the register scrub consistent
across all entry points.
Fixes: f33f2d4c7c ("s390/bp: remove TIF_ISOLATE_BP")
Cc: stable@kernel.org
Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Previously different architectures were using random sources of
differing strength and cost to decide the random kstack offset. A number
of architectures (loongarch, powerpc, s390, x86) were using their
timestamp counter, at whatever the frequency happened to be. Other
arches (arm64, riscv) were using entropy from the crng via
get_random_u16().
There have been concerns that in some cases the timestamp counters may
be too weak, because they can be easily guessed or influenced by user
space. And get_random_u16() has been shown to be too costly for the
level of protection kstack offset randomization provides.
So let's use a common, architecture-agnostic source of entropy; a
per-cpu prng, seeded at boot-time from the crng. This has a few
benefits:
- We can remove choose_random_kstack_offset(); That was only there to
try to make the timestamp counter value a bit harder to influence
from user space [*].
- The architecture code is simplified. All it has to do now is call
add_random_kstack_offset() in the syscall path.
- The strength of the randomness can be reasoned about independently
of the architecture.
- Arches previously using get_random_u16() now have much faster
syscall paths, see below results.
[*] Additionally, this gets rid of some redundant work on s390 and x86.
Before this patch, those architectures called
choose_random_kstack_offset() under arch_exit_to_user_mode_prepare(),
which is also called for exception returns to userspace which were *not*
syscalls (e.g. regular interrupts). Getting rid of
choose_random_kstack_offset() avoids a small amount of redundant work
for the non-syscall cases.
In some configurations, add_random_kstack_offset() will now call
instrumentable code, so for a couple of arches, I have moved the call a
bit later to the first point where instrumentation is allowed. This
doesn't impact the efficacy of the mechanism.
There have been some claims that a prng may be less strong than the
timestamp counter if not regularly reseeded. But the prng has a period
of about 2^113. So as long as the prng state remains secret, it should
not be possible to guess. If the prng state can be accessed, we have
bigger problems.
Additionally, we are only consuming 6 bits to randomize the stack, so
there are only 64 possible random offsets. I assert that it would be
trivial for an attacker to brute force by repeating their attack and
waiting for the random stack offset to be the desired one. The prng
approach seems entirely proportional to this level of protection.
Performance data are provided below. The baseline is v6.18 with rndstack
on for each respective arch. (I)/(R) indicate statistically significant
improvement/regression. arm64 platform is AWS Graviton3 (m7g.metal).
x86_64 platform is AWS Sapphire Rapids (m7i.24xlarge):
+-----------------+--------------+---------------+---------------+
| Benchmark | Result Class | per-cpu-prng | per-cpu-prng |
| | | arm64 (metal) | x86_64 (VM) |
+=================+==============+===============+===============+
| syscall/getpid | mean (ns) | (I) -9.50% | (I) -17.65% |
| | p99 (ns) | (I) -59.24% | (I) -24.41% |
| | p99.9 (ns) | (I) -59.52% | (I) -28.52% |
+-----------------+--------------+---------------+---------------+
| syscall/getppid | mean (ns) | (I) -9.52% | (I) -19.24% |
| | p99 (ns) | (I) -59.25% | (I) -25.03% |
| | p99.9 (ns) | (I) -59.50% | (I) -28.17% |
+-----------------+--------------+---------------+---------------+
| syscall/invalid | mean (ns) | (I) -10.31% | (I) -18.56% |
| | p99 (ns) | (I) -60.79% | (I) -20.06% |
| | p99.9 (ns) | (I) -61.04% | (I) -25.04% |
+-----------------+--------------+---------------+---------------+
I tested an earlier version of this change on x86 bare metal and it
showed a smaller but still significant improvement. The bare metal
system wasn't available this time around so testing was done in a VM
instance. I'm guessing the cost of rdtsc is higher for VMs.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Link: https://patch.msgid.link/20260303150840.3789438-3-ryan.roberts@arm.com
Signed-off-by: Kees Cook <kees@kernel.org>
The purpose of the constant it is not entirely clear from its name.
As this constant is going to be exposed in a UAPI header, give it a more
specific name for clarity. As all its users call it 'marker', use that
wording in the constant itself.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This enum originates in generic cryptographic code and has a very
generic name. Nowadays it is only used for module signatures.
As this enum is going to be exposed in a UAPI header, give it a more
specific name for clarity and consistency.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Nicolas Schier <nsc@kernel.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
commit fcc43a7e29 ("s390/configs: Set HZ=1000") changed the interrupt
frequency of the system. On machines with heavy load and many perf event
overflows, this might lead to an exception. Dmesg displays these entries:
[112.242542] cpum_sf: Loading sampling controls failed: op 1 err -22
One line per CPU online.
The root cause is the CPU Measurement sampling facility overflow
adjustment. Whenever an overflow (too much samples per tick) occurs, the
sampling rate is adjusted and increased. This was done without observing
the maximum sampling rate limit. When the current sampling interval is
higher than the maximum sampling rate limit, the lsctl instruction raises
an exception. The error messages is the result of such an exception.
Observe the upper limit when the new sampling rate is recalculated.
Cc: stable@vger.kernel.org
Fixes: 39d4a501a9 ("s390/cpum_sf: Adjust sampling interval to avoid hitting sample limits")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Cross-merge BPF and other fixes after downstream PR.
Minor conflicts in:
tools/testing/selftests/bpf/progs/exceptions_fail.c
tools/testing/selftests/bpf/progs/verifier_bounds.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The recent XFER_TO_GUEST_WORK change resulted in a situation, where the
vsie code would interpret a signal during work as a machine check during
SIE as both use the EINTR return code.
The exit_reason of the sie64a function has nothing to do with the
kvm_run exit_reason. Rename it and define a specific code for machine
checks instead of abusing -EINTR.
rename exit_reason into sie_return to avoid the naming conflict
and change the code flow in vsie.c to have a separate variable for rc
and sie_return.
Fixes: 2bd1337a12 ("KVM: s390: Use generic VIRT_XFER_TO_GUEST_WORK functions")
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Pull s390 fixes from Vasily Gorbik:
- Revert IRQ entry/exit path optimization that incorrectly cleared
some PSW bits before irqentry_exit(), causing boot failures with
linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the
problem)
- Fix zcrypt code to show CCA card serial numbers even when the
default crypto domain is offline by selecting any domain available,
preventing empty sysfs entries
* tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute
s390: Revert "s390/irq/idle: Remove psw bits early"
security/integrity/secure_boot.c contains a single __weak function,
which breaks recordmcount when building with clang:
$ make -skj"$(nproc)" ARCH=powerpc LLVM=1 ppc64_defconfig security/integrity/secure_boot.o
Cannot find symbol for section 2: .text.
security/integrity/secure_boot.o: failed
Introduce a Kconfig symbol, CONFIG_HAVE_ARCH_GET_SECUREBOOT, to indicate
that an architecture provides a definition of arch_get_secureboot().
Provide a static inline stub when this symbol is not defined to achieve
the same effect as the __weak function, allowing secure_boot.c to be
removed altogether. Move the s390 definition of arch_get_secureboot()
out of the CONFIG_KEXEC_FILE block to ensure it is always available, as
it does not actually depend on KEXEC_FILE.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Fixes: 31a6a07eef ("integrity: Make arch_ima_get_secureboot integrity-wide")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
This reverts commit d8b5cf9c63.
Mikhail Zaslonko reported that linux-next doesn't boot anymore [2]. Reason
for this is recent change [2] was supposed to slightly optimize the irq
entry/exit path by removing some psw bits early in case of an idle exit.
This however is incorrect since irqentry_exit() requires the correct old
psw state at irq entry. Otherwise the embedded regs_irqs_disabled() will
not provide the correct result.
With linux-next and HRTIMER_REARM_DEFERRED this leads to the observed boot
problems, however the commit is broken in any case.
Revert the commit which introduced this.
Thanks to Peter Zijlstra for pointing out that this is a bug in the s390
entry code.
Fixes: d8b5cf9c63 ("s390/irq/idle: Remove psw bits early") [1]
Reported-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Reported-by: Peter Zijlstra <peterz@infradead.org>
Closes: https://lore.kernel.org/r/af549a19-db99-4b16-8511-bf315177a13e@linux.ibm.com/ [2]
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Tested-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20260306111919.362559-1-hca@linux.ibm.com
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull Kbuild fixes from Nathan Chancellor:
- Split out .modinfo section from ELF_DETAILS macro, as that macro may
be used in other areas that expect to discard .modinfo, breaking
certain image layouts
- Adjust genksyms parser to handle optional attributes in certain
declarations, necessary after commit 07919126ec ("netfilter:
annotate NAT helper hook pointers with __rcu")
- Include resolve_btfids in external module build created by
scripts/package/install-extmod-build when it may be run on external
modules
- Avoid removing objtool binary with 'make clean', as it is required
for external module builds
* tag 'kbuild-fixes-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kbuild: Leave objtool binary around with 'make clean'
kbuild: install-extmod-build: Package resolve_btfids if necessary
genksyms: Fix parsing a declarator with a preceding attribute
kbuild: Split .modinfo out from ELF_DETAILS
Commit b5ca117365 ("ima: prevent kexec_load syscall based on runtime
secureboot flag") and commit 268a784049 ("s390/kexec_file: Disable
kexec_load when IPLed secure") disabled the kexec_load syscall based
on the secureboot mode. Commit 9e2b4be377 ("ima: add a new CONFIG
for loading arch-specific policies") needed to detect the secure boot
mode, not to load an IMA architecture specific policy. Since there is
the new CONFIG_INTEGRITY_SECURE_BOOT, drop
CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT for s390.
Signed-off-by: Coiby Xu <coxu@redhat.com>
Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[Vasily Gorbik: Fix missing arch_get_secureboot() prototype warning]
link: https://lore.kernel.org/linux-integrity/c00-01.ttbfdx5@ub.hpns/
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
EVM and other LSMs need the ability to query the secure boot status of
the system, without directly calling the IMA arch_ima_get_secureboot
function. Refactor the secure boot status check into a general function
named arch_get_secureboot.
Reported-and-suggested-by: Mimi Zohar <zohar@linux.ibm.com>
Suggested-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Coiby Xu <coxu@redhat.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Commit 3e86e4d74c ("kbuild: keep .modinfo section in
vmlinux.unstripped") added .modinfo to ELF_DETAILS while removing it
from COMMON_DISCARDS, as it was needed in vmlinux.unstripped and
ELF_DETAILS was present in all architecture specific vmlinux linker
scripts. While this shuffle is fine for vmlinux, ELF_DETAILS and
COMMON_DISCARDS may be used by other linker scripts, such as the s390
and x86 compressed boot images, which may not expect to have a .modinfo
section. In certain circumstances, this could result in a bootloader
failing to load the compressed kernel [1].
Commit ddc6cbef3e ("s390/boot/vmlinux.lds.S: Ensure bzImage ends with
SecureBoot trailer") recently addressed this for the s390 bzImage but
the same bug remains for arm, parisc, and x86. The presence of .modinfo
in the x86 bzImage was the root cause of the issue worked around with
commit d50f210913 ("kbuild: align modinfo section for Secureboot
Authenticode EDK2 compat"). misc.c in arch/x86/boot/compressed includes
lib/decompress_unzstd.c, which in turn includes lib/xxhash.c and its
MODULE_LICENSE / MODULE_DESCRIPTION macros due to the STATIC definition.
Split .modinfo out from ELF_DETAILS into its own macro and handle it in
all vmlinux linker scripts. Discard .modinfo in the places where it was
previously being discarded from being in COMMON_DISCARDS, as it has
never been necessary in those uses.
Cc: stable@vger.kernel.org
Fixes: 3e86e4d74c ("kbuild: keep .modinfo section in vmlinux.unstripped")
Reported-by: Ed W <lists@wildgooses.com>
Closes: https://lore.kernel.org/587f25e0-a80e-46a5-9f01-87cb40cfa377@wildgooses.com/ [1]
Tested-by: Ed W <lists@wildgooses.com> # x86_64
Link: https://patch.msgid.link/20260225-separate-modinfo-from-elf-details-v1-1-387ced6baf4b@kernel.org
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
s390_reset_system() calls set_prefix(0), which switches back to the
absolute lowcore. At that point the stack protector canary no longer
matches the canary from the lowcore the function was entered with, so
the stack check fails.
Mark s390_reset_system() __no_stack_protector. This is safe here since
its callers (__do_machine_kdump() and __do_machine_kexec()) are
effectively no-return and fall back to disabled_wait() on failure.
Fixes: f5730d44e0 ("s390: Add stackprotector support")
Reported-by: Nikita Dubrovskii <nikita@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use lockdep_assert_irqs_disabled() instead of BUG_ON(). This avoids
crashing the kernel, and generates better code if CONFIG_PROVE_LOCKING
is disabled.
Reviewed-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
