Alexei Starovoitov says:
====================
pull-request: bpf-next 2018-10-08
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) sk_lookup_[tcp|udp] and sk_release helpers from Joe Stringer which allow
BPF programs to perform lookups for sockets in a network namespace. This would
allow programs to determine early on in processing whether the stack is
expecting to receive the packet, and perform some action (eg drop,
forward somewhere) based on this information.
2) per-cpu cgroup local storage from Roman Gushchin.
Per-cpu cgroup local storage is very similar to simple cgroup storage
except all the data is per-cpu. The main goal of per-cpu variant is to
implement super fast counters (e.g. packet counters), which don't require
neither lookups, neither atomic operations in a fast path.
The example of these hybrid counters is in selftests/bpf/netcnt_prog.c
3) allow HW offload of programs with BPF-to-BPF function calls from Quentin Monnet
4) support more than 64-byte key/value in HW offloaded BPF maps from Jakub Kicinski
5) rename of libbpf interfaces from Andrey Ignatov.
libbpf is maturing as a library and should follow good practices in
library design and implementation to play well with other libraries.
This patch set brings consistent naming convention to global symbols.
6) relicense libbpf as LGPL-2.1 OR BSD-2-Clause from Alexei Starovoitov
to let Apache2 projects use libbpf
7) various AF_XDP fixes from Björn and Magnus
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next tree:
1) Support for matching on ipsec policy already set in the route, from
Florian Westphal.
2) Split set destruction into deactivate and destroy phase to make it
fit better into the transaction infrastructure, also from Florian.
This includes a patch to warn on imbalance when setting the new
activate and deactivate interfaces.
3) Release transaction list from the workqueue to remove expensive
synchronize_rcu() from configuration plane path. This speeds up
configuration plane quite a bit. From Florian Westphal.
4) Add new xfrm/ipsec extension, this new extension allows you to match
for ipsec tunnel keys such as source and destination address, spi and
reqid. From Máté Eckl and Florian Westphal.
5) Add secmark support, this includes connsecmark too, patches
from Christian Gottsche.
6) Allow to specify remaining bytes in xt_quota, from Chenbo Feng.
One follow up patch to calm a clang warning for this one, from
Nathan Chancellor.
7) Flush conntrack entries based on layer 3 family, from Kristian Evensen.
8) New revision for cgroups2 to shrink the path field.
9) Get rid of obsolete need_conntrack(), as a result from recent
demodularization works.
10) Use WARN_ON instead of BUG_ON, from Florian Westphal.
11) Unused exported symbol in nf_nat_ipv4_fn(), from Florian.
12) Remove superfluous check for timeout netlink parser and dump
functions in layer 4 conntrack helpers.
13) Unnecessary redundant rcu read side locks in NAT redirect,
from Taehee Yoo.
14) Pass nf_hook_state structure to error handlers, patch from
Florian Westphal.
15) Remove ->new() interface from layer 4 protocol trackers. Place
them in the ->packet() interface. From Florian.
16) Place conntrack ->error() handling in the ->packet() interface.
Patches from Florian Westphal.
17) Remove unused parameter in the pernet initialization path,
also from Florian.
18) Remove additional parameter to specify layer 3 protocol when
looking up for protocol tracker. From Florian.
19) Shrink array of layer 4 protocol trackers, from Florian.
20) Check for linear skb only once from the ALG NAT mangling
codebase, from Taehee Yoo.
21) Use rhashtable_walk_enter() instead of deprecated
rhashtable_walk_init(), also from Taehee.
22) No need to flush all conntracks when only one single address
is gone, from Tan Hu.
23) Remove redundant check for NAT flags in flowtable code, from
Taehee Yoo.
24) Use rhashtable_lookup() instead of rhashtable_lookup_fast()
from netfilter codebase, since rcu read lock side is already
assumed in this path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new socket option, NETLINK_DUMP_STRICT_CHK, that userspace
can use via setsockopt to request strict checking of headers and
attributes on dump requests.
To get dump features such as kernel side filtering based on data in
the header or attributes appended to the dump request, userspace
must call setsockopt() for NETLINK_DUMP_STRICT_CHK and a non-zero
value. Since the netlink sock and its flags are private to the
af_netlink code, the strict checking flag is passed to dump handlers
via a flag in the netlink_callback struct.
For old userspace on new kernel there is no impact as all of the data
checks in later patches are wrapped in a check on the new strict flag.
For new userspace on old kernel, the setsockopt will fail and even if
new userspace sets data in the headers and appended attributes the
kernel will silently ignore it. Moving forward when the setsockopt
succeeds, the new userspace on old kernel means the dump request can
pass an attribute the kernel does not understand. The dump will then
fail as the older kernel does not understand it.
New userspace on new kernel setting the socket option gets the benefit
of the improved data dump.
Kernel side the NETLINK_DUMP_STRICT_CHK uapi is converted to a generic
NETLINK_F_STRICT_CHK flag which can potentially be leveraged for tighter
checking on the NEW, DEL, and SET commands.
Signed-off-by: David Ahern <dsahern@gmail.com>
Acked-by: Christian Brauner <christian@brauner.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.
Example configuration:
tc qdisc replace dev enp3s0 parent root handle 100 taprio \
num_tc 3 \
map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
queues 1@0 1@1 2@2 \
base-time 1528743495910289987 \
sched-entry S 01 300000 \
sched-entry S 02 300000 \
sched-entry S 04 300000 \
clockid CLOCK_TAI
The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:
sched-entry <CMD> <GATE MASK> <INTERVAL>
The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.
This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.
The other parameters can be defined as follows:
- base-time: specifies the instant when the schedule starts, if
'base-time' is a time in the past, the schedule will start at
base-time + (N * cycle-time)
where N is the smallest integer so the resulting time is greater
than "now", and "cycle-time" is the sum of all the intervals of the
entries in the schedule;
- clockid: specifies the reference clock to be used;
The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the DNS resolver to retrieve a set of servers and their associated
addresses, ports, preference and weight ratings.
In terms of communication with userspace, "srv=1" is added to the callout
string (the '1' indicating the maximum data version supported by the
kernel) to ask the userspace side for this.
If the userspace side doesn't recognise it, it will ignore the option and
return the usual text address list.
If the userspace side does recognise it, it will return some binary data
that begins with a zero byte that would cause the string parsers to give an
error. The second byte contains the version of the data in the blob (this
may be between 1 and the version specified in the callout data). The
remainder of the payload is version-specific.
In version 1, the payload looks like (note that this is packed):
u8 Non-string marker (ie. 0)
u8 Content (0 => Server list)
u8 Version (ie. 1)
u8 Source (eg. DNS_RECORD_FROM_DNS_SRV)
u8 Status (eg. DNS_LOOKUP_GOOD)
u8 Number of servers
foreach-server {
u16 Name length (LE)
u16 Priority (as per SRV record) (LE)
u16 Weight (as per SRV record) (LE)
u16 Port (LE)
u8 Source (eg. DNS_RECORD_FROM_NSS)
u8 Status (eg. DNS_LOOKUP_GOT_NOT_FOUND)
u8 Protocol (eg. DNS_SERVER_PROTOCOL_UDP)
u8 Number of addresses
char[] Name (not NUL-terminated)
foreach-address {
u8 Family (AF_INET{,6})
union {
u8[4] ipv4_addr
u8[16] ipv6_addr
}
}
}
This can then be used to fetch a whole cell's VL-server configuration for
AFS, for example.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A major flaw of the current xt_quota module is that quota in a specific
rule gets reset every time there is a rule change in the same table. It
makes the xt_quota module not very useful in a table in which iptables
rules are changed at run time. This fix introduces a new counter that is
visible to userspace as the remaining quota of the current rule. When
userspace restores the rules in a table, it can restore the counter to
the remaining quota instead of resetting it to the full quota.
Signed-off-by: Chenbo Feng <fengc@google.com>
Suggested-by: Maciej Żenczykowski <maze@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds new BPF helper functions, bpf_sk_lookup_tcp() and
bpf_sk_lookup_udp() which allows BPF programs to find out if there is a
socket listening on this host, and returns a socket pointer which the
BPF program can then access to determine, for instance, whether to
forward or drop traffic. bpf_sk_lookup_xxx() may take a reference on the
socket, so when a BPF program makes use of this function, it must
subsequently pass the returned pointer into the newly added sk_release()
to return the reference.
By way of example, the following pseudocode would filter inbound
connections at XDP if there is no corresponding service listening for
the traffic:
struct bpf_sock_tuple tuple;
struct bpf_sock_ops *sk;
populate_tuple(ctx, &tuple); // Extract the 5tuple from the packet
sk = bpf_sk_lookup_tcp(ctx, &tuple, sizeof tuple, netns, 0);
if (!sk) {
// Couldn't find a socket listening for this traffic. Drop.
return TC_ACT_SHOT;
}
bpf_sk_release(sk, 0);
return TC_ACT_OK;
Signed-off-by: Joe Stringer <joe@wand.net.nz>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit introduced per-cpu cgroup local storage.
Per-cpu cgroup local storage is very similar to simple cgroup storage
(let's call it shared), except all the data is per-cpu.
The main goal of per-cpu variant is to implement super fast
counters (e.g. packet counters), which don't require neither
lookups, neither atomic operations.
>From userspace's point of view, accessing a per-cpu cgroup storage
is similar to other per-cpu map types (e.g. per-cpu hashmaps and
arrays).
Writing to a per-cpu cgroup storage is not atomic, but is performed
by copying longs, so some minimal atomicity is here, exactly
as with other per-cpu maps.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add the ability to set the security context of packets within the nf_tables framework.
Add a nft_object for holding security contexts in the kernel and manipulating packets on the wire.
Convert the security context strings at rule addition time to security identifiers.
This is the same behavior like in xt_SECMARK and offers better performance than computing it per packet.
Set the maximum security context length to 256.
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-09-25
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Allow for RX stack hardening by implementing the kernel's flow
dissector in BPF. Idea was originally presented at netconf 2017 [0].
Quote from merge commit:
[...] Because of the rigorous checks of the BPF verifier, this
provides significant security guarantees. In particular, the BPF
flow dissector cannot get inside of an infinite loop, as with
CVE-2013-4348, because BPF programs are guaranteed to terminate.
It cannot read outside of packet bounds, because all memory accesses
are checked. Also, with BPF the administrator can decide which
protocols to support, reducing potential attack surface. Rarely
encountered protocols can be excluded from dissection and the
program can be updated without kernel recompile or reboot if a
bug is discovered. [...]
Also, a sample flow dissector has been implemented in BPF as part
of this work, from Petar and Willem.
[0] http://vger.kernel.org/netconf2017_files/rx_hardening_and_udp_gso.pdf
2) Add support for bpftool to list currently active attachment
points of BPF networking programs providing a quick overview
similar to bpftool's perf subcommand, from Yonghong.
3) Fix a verifier pruning instability bug where a union member
from the register state was not cleared properly leading to
branches not being pruned despite them being valid candidates,
from Alexei.
4) Various smaller fast-path optimizations in XDP's map redirect
code, from Jesper.
5) Enable to recognize BPF_MAP_TYPE_REUSEPORT_SOCKARRAY maps
in bpftool, from Roman.
6) Remove a duplicate check in libbpf that probes for function
storage, from Taeung.
7) Fix an issue in test_progs by avoid checking for errno since
on success its value should not be checked, from Mauricio.
8) Fix unused variable warning in bpf_getsockopt() helper when
CONFIG_INET is not configured, from Anders.
9) Fix a compilation failure in the BPF sample code's use of
bpf_flow_keys, from Prashant.
10) Minor cleanups in BPF code, from Yue and Zhong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Version bump conflict in batman-adv, take what's in net-next.
iavf conflict, adjustment of netdev_ops in net-next conflicting
with poll controller method removal in net.
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new hardware specific basic counter, TCA_STATS_BASIC_HW. This can
be used to count packets/bytes processed by hardware offload.
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
uapi/linux/if_arp.h includes linux/netdevice.h, which uses
IFNAMSIZ. Hence, use it instead of hard-coded value.
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo writes:
"It's mostly small bugfixes and cleanups, mostly around x86 nested
virtualization. One important change, not related to nested
virtualization, is that the ability for the guest kernel to trap
CPUID instructions (in Linux that's the ARCH_SET_CPUID arch_prctl) is
now masked by default. This is because the feature is detected
through an MSR; a very bad idea that Intel seems to like more and
more. Some applications choke if the other fields of that MSR are
not initialized as on real hardware, hence we have to disable the
whole MSR by default, as was the case before Linux 4.12."
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (23 commits)
KVM: nVMX: Fix bad cleanup on error of get/set nested state IOCTLs
kvm: selftests: Add platform_info_test
KVM: x86: Control guest reads of MSR_PLATFORM_INFO
KVM: x86: Turbo bits in MSR_PLATFORM_INFO
nVMX x86: Check VPID value on vmentry of L2 guests
nVMX x86: check posted-interrupt descriptor addresss on vmentry of L2
KVM: nVMX: Wake blocked vCPU in guest-mode if pending interrupt in virtual APICv
KVM: VMX: check nested state and CR4.VMXE against SMM
kvm: x86: make kvm_{load|put}_guest_fpu() static
x86/hyper-v: rename ipi_arg_{ex,non_ex} structures
KVM: VMX: use preemption timer to force immediate VMExit
KVM: VMX: modify preemption timer bit only when arming timer
KVM: VMX: immediately mark preemption timer expired only for zero value
KVM: SVM: Switch to bitmap_zalloc()
KVM/MMU: Fix comment in walk_shadow_page_lockless_end()
kvm: selftests: use -pthread instead of -lpthread
KVM: x86: don't reset root in kvm_mmu_setup()
kvm: mmu: Don't read PDPTEs when paging is not enabled
x86/kvm/lapic: always disable MMIO interface in x2APIC mode
KVM: s390: Make huge pages unavailable in ucontrol VMs
...
Takashi writes:
"sound fixes for 4.19-rc5
here comes a collection of various fixes, mostly for stable-tree
or regression fixes.
Two relatively high LOCs are about the (rather simple) conversion of
uapi integer types in topology API, and a regression fix about HDMI
hotplug notification on AMD HD-audio. The rest are all small
individual fixes like ASoC Intel Skylake race condition, minor
uninitialized page leak in emu10k1 ioctl, Firewire audio error paths,
and so on."
* tag 'sound-4.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (33 commits)
ALSA: fireworks: fix memory leak of response buffer at error path
ALSA: oxfw: fix memory leak of discovered stream formats at error path
ALSA: oxfw: fix memory leak for model-dependent data at error path
ALSA: bebob: fix memory leak for M-Audio FW1814 and ProjectMix I/O at error path
ALSA: hda - Enable runtime PM only for discrete GPU
ALSA: oxfw: fix memory leak of private data
ALSA: firewire-tascam: fix memory leak of private data
ALSA: firewire-digi00x: fix memory leak of private data
sound: don't call skl_init_chip() to reset intel skl soc
sound: enable interrupt after dma buffer initialization
Revert "ASoC: Intel: Skylake: Acquire irq after RIRB allocation"
ALSA: emu10k1: fix possible info leak to userspace on SNDRV_EMU10K1_IOCTL_INFO
ASoC: cs4265: fix MMTLR Data switch control
ASoC: AMD: Ensure reset bit is cleared before configuring
ALSA: fireface: fix memory leak in ff400_switch_fetching_mode()
ALSA: bebob: use address returned by kmalloc() instead of kernel stack for streaming DMA mapping
ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFER
ASoC: rsnd: adg: care clock-frequency size
ASoC: uniphier: change status to orphan
ASoC: rsnd: fixup not to call clk_get/set under non-atomic
...
Add KVM_CAP_MSR_PLATFORM_INFO so that userspace can disable guest access
to reads of MSR_PLATFORM_INFO.
Disabling access to reads of this MSR gives userspace the control to "expose"
this platform-dependent information to guests in a clear way. As it exists
today, guests that read this MSR would get unpopulated information if userspace
hadn't already set it (and prior to this patch series, only the CPUID faulting
information could have been populated). This existing interface could be
confusing if guests don't handle the potential for incorrect/incomplete
information gracefully (e.g. zero reported for base frequency).
Signed-off-by: Drew Schmitt <dasch@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Two new tls tests added in parallel in both net and net-next.
Used Stephen Rothwell's linux-next resolution.
Signed-off-by: David S. Miller <davem@davemloft.net>
ASoC: Fixes for v4.19
This is the usual set of small fixes scatterd around various drivers,
plus one fix for DAPM and a UAPI build fix. There's not a huge amount
that stands out here relative to anything else.
cgroup v2 path field is PATH_MAX which is too large, this is placing too
much pressure on memory allocation for people with many rules doing
cgroup v1 classid matching, side effects of this are bug reports like:
https://bugzilla.kernel.org/show_bug.cgi?id=200639
This patch registers a new revision that shrinks the cgroup path to 512
bytes, which is the same approach we follow in similar extensions that
have a path field.
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: Tejun Heo <tj@kernel.org>
supports fetching saddr/daddr of tunnel mode states, request id and spi.
If direction is 'in', use inbound skb secpath, else dst->xfrm.
Joint work with Máté Eckl.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Useful e.g. to avoid NATting inner headers of to-be-encrypted packets.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Adds a hook for programs of type BPF_PROG_TYPE_FLOW_DISSECTOR and
attach type BPF_FLOW_DISSECTOR that is executed in the flow dissector
path. The BPF program is per-network namespace.
Signed-off-by: Petar Penkov <ppenkov@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The socket option will be enabled by default to ensure current behaviour
is not changed. This is the same for the IPv4 version.
A socket bound to in6addr_any and a specific port will receive all traffic
on that port. Analogue to IP_MULTICAST_ALL, disable this behaviour, if
one or more multicast groups were joined (using said socket) and only
pass on multicast traffic from groups, which were explicitly joined via
this socket.
Without this option disabled a socket (system even) joined to multiple
multicast groups is very hard to get right. Filtering by destination
address has to take place in user space to avoid receiving multicast
traffic from other multicast groups, which might have traffic on the same
port.
The extension of the IP_MULTICAST_ALL socketoption to just apply to ipv6,
too, is not done to avoid changing the behaviour of current applications.
Signed-off-by: Andre Naujoks <nautsch2@gmail.com>
Acked-By: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar with commit 72f6d71e49 ("vxlan: add ttl inherit support"),
currently ttl == 0 means "use whatever default value" on geneve instead
of inherit inner ttl. To respect compatibility with old behavior, let's
add a new IFLA_GENEVE_TTL_INHERIT for geneve ttl inherit support.
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for entries which are "sticky", i.e. will not change their port
if they show up from a different one. A new ndm flag is introduced for that
purpose - NTF_STICKY. We allow to set it only to non-local entries.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Change flower in_hw_count type to fixed-size u32 and dump it as
TCA_FLOWER_IN_HW_COUNT. This change is necessary to properly test shared
blocks and re-offload functionality.
Signed-off-by: Vlad Buslov <vladbu@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds IFLA_TARGET_NETNSID as an alias for IFLA_IF_NETNSID for
RTM_*LINK requests.
The new name is clearer and also aligns with the newly introduced
IFA_TARGET_NETNSID propert for RTM_*ADDR requests.
Signed-off-by: Christian Brauner <christian@brauner.io>
Suggested-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Cc: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This adds a new IFA_TARGET_NETNSID property to be used by address
families such as PF_INET and PF_INET6.
The IFA_TARGET_NETNSID property can be used to send a network namespace
identifier as part of a request. If a IFA_TARGET_NETNSID property is
identified it will be used to retrieve the target network namespace in
which the request is to be made.
Signed-off-by: Christian Brauner <christian@brauner.io>
Cc: Jiri Benc <jbenc@redhat.com>
Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, the only way to ignore outgoing packets on a packet socket is
via the BPF filter. With MSG_ZEROCOPY, packets that are looped into
AF_PACKET are copied in dev_queue_xmit_nit(), and this copy happens even
if the filter run from packet_rcv() would reject them. So the presence
of a packet socket on the interface takes away the benefits of
MSG_ZEROCOPY, even if the packet socket is not interested in outgoing
packets. (Even when MSG_ZEROCOPY is not used, the skb is unnecessarily
cloned, but the cost for that is much lower.)
Add a socket option to allow AF_PACKET sockets to ignore outgoing
packets to solve this. Note that the *BSDs already have something
similar: BIOCSSEESENT/BIOCSDIRECTION and BIOCSDIRFILT.
The first intended user is lldpd.
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Drivers able to correctly replace a in-use key should set
@NL80211_EXT_FEATURE_CAN_REPLACE_PTK0 to allow the user space (e.g.
hostapd or wpa_supplicant) to rekey PTK keys.
The user space must detect a PTK rekey attempt and only go ahead with it
when the driver has set this flag. If the driver is not supporting the
feature the user space either must not replace the PTK key or perform a
full re-association instead.
Ignoring this flag and continuing to rekey the connection can still work
but has to be considered insecure and broken. Depending on the driver it
can leak clear text packets or freeze the connection and is only
supported to allow the user space to be updated.
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
Reviewed-by: Denis Kenzior <denkenz@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Merge misc fixes from Andrew Morton:
"17 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
nilfs2: convert to SPDX license tags
drivers/dax/device.c: convert variable to vm_fault_t type
lib/Kconfig.debug: fix three typos in help text
checkpatch: add __ro_after_init to known $Attribute
mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal
uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name
memory_hotplug: fix kernel_panic on offline page processing
checkpatch: add optional static const to blank line declarations test
ipc/shm: properly return EIDRM in shm_lock()
mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported.
mm/util.c: improve kvfree() kerneldoc
tools/vm/page-types.c: fix "defined but not used" warning
tools/vm/slabinfo.c: fix sign-compare warning
kmemleak: always register debugfs file
mm: respect arch_dup_mmap() return value
mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm().
mm: memcontrol: print proper OOM header when no eligible victim left
The _IOC_READ flag fits this ioctl request more because this request
actually only writes to, but doesn't read from userspace.
See NOTEs in include/uapi/asm-generic/ioctl.h for more information.
Fixes: 429711aec2 ("vhost: switch to use new message format")
Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Include linux/in6.h for struct in6_addr.
/usr/include/linux/rds.h:156:18: error: field ‘laddr’ has incomplete type
struct in6_addr laddr;
^~~~~
/usr/include/linux/rds.h:157:18: error: field ‘faddr’ has incomplete type
struct in6_addr faddr;
^~~~~
/usr/include/linux/rds.h:178:18: error: field ‘laddr’ has incomplete type
struct in6_addr laddr;
^~~~~
/usr/include/linux/rds.h:179:18: error: field ‘faddr’ has incomplete type
struct in6_addr faddr;
^~~~~
/usr/include/linux/rds.h:198:18: error: field ‘bound_addr’ has incomplete type
struct in6_addr bound_addr;
^~~~~~~~~~
/usr/include/linux/rds.h:199:18: error: field ‘connected_addr’ has incomplete type
struct in6_addr connected_addr;
^~~~~~~~~~~~~~
/usr/include/linux/rds.h:219:18: error: field ‘local_addr’ has incomplete type
struct in6_addr local_addr;
^~~~~~~~~~
/usr/include/linux/rds.h:221:18: error: field ‘peer_addr’ has incomplete type
struct in6_addr peer_addr;
^~~~~~~~~
/usr/include/linux/rds.h:245:18: error: field ‘src_addr’ has incomplete type
struct in6_addr src_addr;
^~~~~~~~
/usr/include/linux/rds.h:246:18: error: field ‘dst_addr’ has incomplete type
struct in6_addr dst_addr;
^~~~~~~~
Fixes: b7ff8b1036 ("rds: Extend RDS API for IPv6 support")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
tokens and ctokens are defined as s64 in htb_class structure,
and clamped to 32bits value during netlink dumps:
cl->xstats.tokens = clamp_t(s64, PSCHED_NS2TICKS(cl->tokens),
INT_MIN, INT_MAX);
Defining it as u32 is working since userspace (tc) is printing it as
signed int, but a correct definition from the beginning is probably
better.
In the same time, 'giants' structure member is unused since years, so
update the comment to mark it unused.
Signed-off-by: Florent Fourcot <florent.fourcot@wifirst.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johannes Berg says:
====================
Only a few changes at this point:
* new channels in 60 GHz
* clarify (average) ACK signal reporting API
* expose ieee80211_send_layer2_update() for all drivers
* start/stop mac80211's TXQs properly when required
* avoid regulatory restore with IE ignoring
* spelling: contidion -> condition
* fully implement WFA Multi-AP backhaul
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Since [gs]et_settings ethtool_ops callbacks have been deprecated in
February 2016, all in tree NIC drivers have been converted to provide
[gs]et_link_ksettings() and out of tree drivers have had enough time to do
the same.
Drop get_settings() and set_settings() and implement both ETHTOOL_[GS]SET
and ETHTOOL_[GS]LINKSETTINGS only using [gs]et_link_ksettings().
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify the API to include all ACK frames in average ACK
signal strength reporting, not just ACKs for data frames.
Make exposing the data conditional on implementing the
extended feature flag.
This is how it was really implemented in mac80211, update
the code there to use the new defines and clean up some of
the setting code.
Keep nl80211.h source compatibility by keeping the old names.
Signed-off-by: Balaji Pothunoori <bpothuno@codeaurora.org>
[rewrite commit log, change compatibility to be old=new
instead of the other way around, update kernel-doc,
roll in mac80211 changes, make mac80211 depend on valid
bit instead of HW flag]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The current support in the 60GHz band is for channels 1-4.
Add support for channels 5 and 6.
This requires enlarging ieee80211_channel.center_freq from u16 to u32.
Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Pull UBI/UBIFS updates from Richard Weinberger:
- Year 2038 preparations
- New UBI feature to skip CRC checks of static volumes
- A new Kconfig option to disable xattrs in UBIFS
- Lots of fixes in UBIFS, found by our new test framework
* tag 'upstream-4.19-rc1' of git://git.infradead.org/linux-ubifs: (21 commits)
ubifs: Set default assert action to read-only
ubifs: Allow setting assert action as mount parameter
ubifs: Rework ubifs_assert()
ubifs: Pass struct ubifs_info to ubifs_assert()
ubifs: Turn two ubifs_assert() into a WARN_ON()
ubi: expose the volume CRC check skip flag
ubi: provide a way to skip CRC checks
ubifs: Use kmalloc_array()
ubifs: Check data node size before truncate
Revert "UBIFS: Fix potential integer overflow in allocation"
ubifs: Add comment on c->commit_sem
ubifs: introduce Kconfig symbol for xattr support
ubifs: use swap macro in swap_dirty_idx
ubifs: tnc: use monotonic znode timestamp
ubifs: use timespec64 for inode timestamps
ubifs: xattr: Don't operate on deleted inodes
ubifs: gc: Fix typo
ubifs: Fix memory leak in lprobs self-check
ubi: Initialize Fastmap checkmapping correctly
ubifs: Fix synced_i_size calculation for xattr inodes
...
Pull second set of KVM updates from Paolo Bonzini:
"ARM:
- Support for Group0 interrupts in guests
- Cache management optimizations for ARMv8.4 systems
- Userspace interface for RAS
- Fault path optimization
- Emulated physical timer fixes
- Random cleanups
x86:
- fixes for L1TF
- a new test case
- non-support for SGX (inject the right exception in the guest)
- fix lockdep false positive"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (49 commits)
KVM: VMX: fixes for vmentry_l1d_flush module parameter
kvm: selftest: add dirty logging test
kvm: selftest: pass in extra memory when create vm
kvm: selftest: include the tools headers
kvm: selftest: unify the guest port macros
tools: introduce test_and_clear_bit
KVM: x86: SVM: Call x86_spec_ctrl_set_guest/host() with interrupts disabled
KVM: vmx: Inject #UD for SGX ENCLS instruction in guest
KVM: vmx: Add defines for SGX ENCLS exiting
x86/kvm/vmx: Fix coding style in vmx_setup_l1d_flush()
x86: kvm: avoid unused variable warning
KVM: Documentation: rename the capability of KVM_CAP_ARM_SET_SERROR_ESR
KVM: arm/arm64: Skip updating PTE entry if no change
KVM: arm/arm64: Skip updating PMD entry if no change
KVM: arm: Use true and false for boolean values
KVM: arm/arm64: vgic: Do not use spin_lock_irqsave/restore with irq disabled
KVM: arm/arm64: vgic: Move DEBUG_SPINLOCK_BUG_ON to vgic.h
KVM: arm: vgic-v3: Add support for ICC_SGI0R and ICC_ASGI1R accesses
KVM: arm64: vgic-v3: Add support for ICC_SGI0R_EL1 and ICC_ASGI1R_EL1 accesses
KVM: arm/arm64: vgic-v3: Add core support for Group0 SGIs
...
Pull more block updates from Jens Axboe:
- Set of bcache fixes and changes (Coly)
- The flush warn fix (me)
- Small series of BFQ fixes (Paolo)
- wbt hang fix (Ming)
- blktrace fix (Steven)
- blk-mq hardware queue count update fix (Jianchao)
- Various little fixes
* tag 'for-4.19/post-20180822' of git://git.kernel.dk/linux-block: (31 commits)
block/DAC960.c: make some arrays static const, shrinks object size
blk-mq: sync the update nr_hw_queues with blk_mq_queue_tag_busy_iter
blk-mq: init hctx sched after update ctx and hctx mapping
block: remove duplicate initialization
tracing/blktrace: Fix to allow setting same value
pktcdvd: fix setting of 'ret' error return for a few cases
block: change return type to bool
block, bfq: return nbytes and not zero from struct cftype .write() method
block, bfq: improve code of bfq_bfqq_charge_time
block, bfq: reduce write overcharge
block, bfq: always update the budget of an entity when needed
block, bfq: readd missing reset of parent-entity service
blk-wbt: fix IO hang in wbt_wait()
block: don't warn for flush on read-only device
bcache: add the missing comments for smp_mb()/smp_wmb()
bcache: remove unnecessary space before ioctl function pointer arguments
bcache: add missing SPDX header
bcache: move open brace at end of function definitions to next line
bcache: add static const prefix to char * array declarations
bcache: fix code comments style
...
The userspace automount(8) daemon is meant to perform a forced expire when
sent a SIGUSR2.
But since the expiration is routed through the kernel and the kernel
doesn't send an expire request if the mount is busy this hasn't worked at
least since autofs version 5.
Add an AUTOFS_EXP_FORCED flag to allow implemention of the feature and
bump the protocol version so user space can check if it's implemented if
needed.
Link: http://lkml.kernel.org/r/152937734715.21213.6594007182776598970.stgit@pluto.themaw.net
Signed-off-by: Ian Kent <raven@themaw.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
