Currently DCE doesn't support the overlay cursor, so the
dm_crtc_get_cursor_mode() function returns DM_CURSOR_NATIVE_MODE
unconditionally. The outcome is that it doesn't check for the
conditions that would necessitate the overlay cursor, meaning
that it doesn't reject cases where the native cursor mode isn't
supported on DCE.
Remove the early return from dm_crtc_get_cursor_mode() for
DCE and instead let it perform the necessary checks and
return DM_CURSOR_OVERLAY_MODE. Add a later check that rejects
when DM_CURSOR_OVERLAY_MODE would be used with DCE.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4600
Suggested-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The driver uses strncmp() to compare sysfs attribute strings,
which does not handle trailing newlines and lacks NULL safety.
sysfs_streq() is the recommended function for sysfs string equality
checks in the kernel, providing safer and more correct behavior.
replace strncmp() with sysfs_streq() in drivers/gpu/drm/amd/pm/amdgpu_pm.c
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The address watch clear code receives watch_id as an unsigned value
(u32), but some helper functions were using a signed int and checked
bits by shifting with watch_id.
If a very large watch_id is passed from userspace, it can be converted
to a negative value. This can cause invalid shifts and may access
memory outside the watch_points array.
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before
using it. Also use BIT(watch_id) to test and clear bits safely.
This keeps the behavior unchanged for valid watch IDs and avoids
undefined behavior for invalid ones.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448
kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow
'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c
433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd,
434 uint32_t watch_id)
435 {
436 int r;
437
438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))
kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if
watch_id is larger than INT_MAX it leads to a buffer overflow.
(Negative shifts are undefined).
439 return -EINVAL;
440
441 if (!pdd->dev->kfd->shared_resources.enable_mes) {
442 r = debug_lock_and_unmap(pdd->dev->dqm);
443 if (r)
444 return r;
445 }
446
447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);
--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch(
449 pdd->dev->adev,
450 watch_id);
v2: (as per, Jonathan Kim)
- Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to
match the clear path.
- Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id().
Fixes: e0f85f4690 ("drm/amdkfd: add debug set and clear address watch points operation")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jonathan Kim <jonathan.kim@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_ib_schedule() returns early after calling amdgpu_ring_undo().
This skips the common free_fence cleanup path. Other error paths were
already changed to use goto free_fence, but this one was missed.
Change the early return to goto free_fence so all error paths clean up
the same way.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c:232 amdgpu_ib_schedule()
warn: missing unwind goto?
drivers/gpu/drm/amd/amdgpu/amdgpu_ib.c
124 int amdgpu_ib_schedule(struct amdgpu_ring *ring, unsigned int num_ibs,
125 struct amdgpu_ib *ibs, struct amdgpu_job *job,
126 struct dma_fence **f)
127 {
...
224
225 if (ring->funcs->insert_start)
226 ring->funcs->insert_start(ring);
227
228 if (job) {
229 r = amdgpu_vm_flush(ring, job, need_pipe_sync);
230 if (r) {
231 amdgpu_ring_undo(ring);
--> 232 return r;
The patch changed the other error paths to goto free_fence but
this one was accidentally skipped.
233 }
234 }
235
236 amdgpu_ring_ib_begin(ring);
...
338
339 free_fence:
340 if (!job)
341 kfree(af);
342 return r;
343 }
Fixes: f903b85ed0 ("drm/amdgpu: fix possible fence leaks from job structure")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_hpd_init() may see connectors without a valid dc_link.
The code already checks dc_link for the polling decision, but later
unconditionally dereferences it when setting up HPD interrupts.
Assign dc_link early and skip connectors where it is NULL.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c:940 amdgpu_dm_hpd_init()
error: we previously assumed 'dc_link' could be null (see line 931)
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm_irq.c
923 /*
924 * Analog connectors may be hot-plugged unlike other connector
925 * types that don't support HPD. Only poll analog connectors.
926 */
927 use_polling |=
928 amdgpu_dm_connector->dc_link &&
^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The patch adds this NULL check but hopefully it can be removed
929 dc_connector_supports_analog(amdgpu_dm_connector->dc_link->link_id.id);
930
931 dc_link = amdgpu_dm_connector->dc_link;
dc_link assigned here.
932
933 /*
934 * Get a base driver irq reference for hpd ints for the lifetime
935 * of dm. Note that only hpd interrupt types are registered with
936 * base driver; hpd_rx types aren't. IOW, amdgpu_irq_get/put on
937 * hpd_rx isn't available. DM currently controls hpd_rx
938 * explicitly with dc_interrupt_set()
939 */
--> 940 if (dc_link->irq_source_hpd != DC_IRQ_SOURCE_INVALID) {
^^^^^^^^^^^^^^^^^^^^^^^ If it's NULL then we are trouble because we dereference it here.
941 irq_type = dc_link->irq_source_hpd - DC_IRQ_SOURCE_HPD1;
942 /*
943 * TODO: There's a mismatch between mode_info.num_hpd
944 * and what bios reports as the # of connectors with hpd
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Cc: Timur Kristóf <timur.kristof@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This version brings along following update:
-Fix system resume lag issue
-Correct hubp GfxVersion verification
-Add parse all extension blocks for VSDB
-Increase DCN35 SR enter/exit latency
-Refactor virtual directory reorganize encoder and hwss files
-Set enable_legacy_fast_update to false for DCN36
-Have dm_atomic_state context aligned with dc_state current
-Avoid updating surface with the same surface under MPO
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
For RGB BT2020 full and limited color spaces, overlay adjustments were
applied twice (once by MM and once by DAL). This results in incorrect
colours and a noticeable difference between mpo and non-mpo cases.
[How]
Add RGB BT2020 full and limited color spaces to list that bypasses post
csc adjustment.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DcGfxBase case was not accounted for in hubp program tiling functions,
causing tiling corruption on PNP.
[How]
Add handling for DcGfxBase so that tiling gets properly cleared.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Nicholas Carbones <ncarbone@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
VSDB parsing loop only searched within the first extension block.
If the VSDB was located in a subsequent extension block,
it would not be found.
[How]
Calculate the total length of all extension blocks (EDID_LENGTH *
edid->extensions) and use that as the loop boundary, allowing the
parser to search through all available extension blocks.
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pull non-MM updates from Andrew Morton:
- "ocfs2: give ocfs2 the ability to reclaim suballocator free bg" saves
disk space by teaching ocfs2 to reclaim suballocator block group
space (Heming Zhao)
- "Add ARRAY_END(), and use it to fix off-by-one bugs" adds the
ARRAY_END() macro and uses it in various places (Alejandro Colomar)
- "vmcoreinfo: support VMCOREINFO_BYTES larger than PAGE_SIZE" makes
the vmcore code future-safe, if VMCOREINFO_BYTES ever exceeds the
page size (Pnina Feder)
- "kallsyms: Prevent invalid access when showing module buildid" cleans
up kallsyms code related to module buildid and fixes an invalid
access crash when printing backtraces (Petr Mladek)
- "Address page fault in ima_restore_measurement_list()" fixes a
kexec-related crash that can occur when booting the second-stage
kernel on x86 (Harshit Mogalapalli)
- "kho: ABI headers and Documentation updates" updates the kexec
handover ABI documentation (Mike Rapoport)
- "Align atomic storage" adds the __aligned attribute to atomic_t and
atomic64_t definitions to get natural alignment of both types on
csky, m68k, microblaze, nios2, openrisc and sh (Finn Thain)
- "kho: clean up page initialization logic" simplifies the page
initialization logic in kho_restore_page() (Pratyush Yadav)
- "Unload linux/kernel.h" moves several things out of kernel.h and into
more appropriate places (Yury Norov)
- "don't abuse task_struct.group_leader" removes the usage of
->group_leader when it is "obviously unnecessary" (Oleg Nesterov)
- "list private v2 & luo flb" adds some infrastructure improvements to
the live update orchestrator (Pasha Tatashin)
* tag 'mm-nonmm-stable-2026-02-12-10-48' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (107 commits)
watchdog/hardlockup: simplify perf event probe and remove per-cpu dependency
procfs: fix missing RCU protection when reading real_parent in do_task_stat()
watchdog/softlockup: fix sample ring index wrap in need_counting_irqs()
kcsan, compiler_types: avoid duplicate type issues in BPF Type Format
kho: fix doc for kho_restore_pages()
tests/liveupdate: add in-kernel liveupdate test
liveupdate: luo_flb: introduce File-Lifecycle-Bound global state
liveupdate: luo_file: Use private list
list: add kunit test for private list primitives
list: add primitives for private list manipulations
delayacct: fix uapi timespec64 definition
panic: add panic_force_cpu= parameter to redirect panic to a specific CPU
netclassid: use thread_group_leader(p) in update_classid_task()
RDMA/umem: don't abuse current->group_leader
drm/pan*: don't abuse current->group_leader
drm/amd: kill the outdated "Only the pthreads threading model is supported" checks
drm/amdgpu: don't abuse current->group_leader
android/binder: use same_thread_group(proc->tsk, current) in binder_mmap()
android/binder: don't abuse current->group_leader
kho: skip memoryless NUMA nodes when reserving scratch areas
...
[why]
Virtual encoders & hwss were grouped in a separate directory,
not aligned with dio and link component structure.
[how]
Moved virtual_link_encoder and virtual_stream_encoder to dc/dio/virtual/.
Moved virtual_link_hwss to dc/link/hwss/ and renamed to link_hwss_virtual.
Removed dc/virtual/ directory.
Updated all includes and build files (Makefiles)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Bhuvanachandra Pinninti <bpinnint@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
Although it's dummy updates of surface update for committing stream
updates, we should not have dummy_updates[j].surface all indicating
to the same surface under multiple surfaces case. Otherwise,
copy_surface_update_to_plane() in update_planes_and_stream_state()
will update to the same surface only.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
System will try to apply idle power optimizations setting during
system resume. But system power state is still in D3 state, and
it will cause the idle power optimizations command not actually
to be sent to DMUB and cause some platforms to go into IPS.
[How]
Set power state to D0 first before calling the
dc_dmub_srv_apply_idle_power_optimizations(dm->dc, false)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add accumulation counter and firmware timestamp to partition metrics for
smu_v13_0_6 & smu_v13_0_12
v2: Use U64 for accumulation counter (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Yang Wang <kevinyang.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The pipe BPP value shouldn't be set outside of the source's / sink's
valid pipe BPP range, ensure this when increasing the minimum pipe BPP
value to 30 due to HDR.
While at it debug print if the HDR mode was requested for a connector by
setting the corresponding HDR connector property. This indicates
if the requested HDR mode could not be enabled, since the selected
pipe BPP is below 30, due to a sink capability or link BW limit.
v2:
- Also handle the case where the sink could support the target 30 BPP
only in DSC mode due to a BW limit, but the sink doesn't support DSC
or 30 BPP as a DSC input BPP. (Chaitanya)
- Debug print the connector's HDR mode in the link config dump, to
indicate if a BPP >= 30 required by HDR couldn't be reached. (Ankit)
- Add Closes: trailer. (Ankit)
- Don't print the 30 BPP-outside of valid BPP range debug message if
the min BPP is already > 30 (and so a target BPP >= 30 required
for HDR is ensured).
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7052
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/15503
Fixes: ba49a4643c ("drm/i915/dp: Set min_bpp limit to 30 in HDR mode")
Cc: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: <stable@vger.kernel.org> # v6.18+
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com> # v1
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patch.msgid.link/20260209133817.395823-1-imre.deak@intel.com
(cherry picked from commit 08b7ef16b6)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Pull driver core updates from Danilo Krummrich:
"Bus:
- Ensure bus->match() is consistently called with the device lock
held
- Improve type safety of bus_find_device_by_acpi_dev()
Devtmpfs:
- Parse 'devtmpfs.mount=' boot parameter with kstrtoint() instead of
simple_strtoul()
- Avoid sparse warning by making devtmpfs_context_ops static
IOMMU:
- Do not register the qcom_smmu_tbu_driver in arm_smmu_device_probe()
MAINTAINERS:
- Add the new driver-core mailing list (driver-core@lists.linux.dev)
to all relevant entries
- Add missing tree location for "FIRMWARE LOADER (request_firmware)"
- Add driver-model documentation to the "DRIVER CORE" entry
- Add missing driver-core maintainers to the "AUXILIARY BUS" entry
Misc:
- Change return type of attribute_container_register() to void; it
has always been infallible
- Do not export sysfs_change_owner(), sysfs_file_change_owner() and
device_change_owner()
- Move devres_for_each_res() from the public devres header to
drivers/base/base.h
- Do not use a static struct device for the faux bus; allocate it
dynamically
Revocable:
- Patches for the revocable synchronization primitive have been
scheduled for v7.0-rc1, but have been reverted as they need some
more refinement
Rust:
- Device:
- Support dev_printk on all device types, not just the core Device
struct; remove now-redundant .as_ref() calls in dev_* print
calls
- Devres:
- Introduce an internal reference count in Devres<T> to avoid a
deadlock condition in case of (indirect) nesting
- DMA:
- Allow drivers to tune the maximum DMA segment size via
dma_set_max_seg_size()
- I/O:
- Introduce the concept of generic I/O backends to handle
different kinds of device shared memory through a common
interface.
This enables higher-level concepts such as register
abstractions, I/O slices, and field projections to be built
generically on top.
In a first step, introduce the Io, IoCapable<T>, and IoKnownSize
trait hierarchy for sharing a common interface supporting offset
validation and bound-checking logic between I/O backends.
- Refactor MMIO to use the common I/O backend infrastructure
- Misc:
- Add __rust_helper annotations to C helpers for inlining into
Rust code
- Use "kernel vertical" style for imports
- Replace kernel::c_str! with C string literals
- Update ARef imports to use sync::aref
- Use pin_init::zeroed() for struct auxiliary_device_id and
debugfs file_operations initialization
- Use LKMM atomic types in debugfs doc-tests
- Various minor comment and documentation fixes
- PCI:
- Implement PCI configuration space accessors using the common I/O
backend infrastructure
- Document pci::Bar device endianness assumptions
- SoC:
- Abstractions for struct soc_device and struct soc_device_attribute
- Sample driver for soc::Device"
* tag 'driver-core-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core: (79 commits)
rust: devres: fix race condition due to nesting
rust: dma: add missing __rust_helper annotations
samples: rust: pci: Remove some additional `.as_ref()` for `dev_*` print
Revert "revocable: Revocable resource management"
Revert "revocable: Add Kunit test cases"
Revert "selftests: revocable: Add kselftest cases"
driver core: remove device_change_owner() export
sysfs: remove exports of sysfs_*change_owner()
driver core: disable revocable code from build
revocable: Add KUnit test for concurrent access
revocable: fix SRCU index corruption by requiring caller-provided storage
revocable: Add KUnit test for provider lifetime races
revocable: Fix races in revocable_alloc() using RCU
driver core: fix inverted "locked" suffix of driver_match_device()
rust: io: move MIN_SIZE and io_addr_assert to IoKnownSize
rust: pci: re-export ConfigSpace
rust: dma: allow drivers to tune max segment size
gpu: tyr: remove redundant `.as_ref()` for `dev_*` print
rust: auxiliary: use `pin_init::zeroed()` for device ID
rust: debugfs: use pin_init::zeroed() for file_operations
...
Pull Kbuild/Kconfig updates from Nathan Chancellor:
"Kbuild:
- Drop '*_probe' pattern from modpost section check allowlist, which
hid legitimate warnings (Johan Hovold)
- Disable -Wtype-limits altogether, instead of enabling at W=2
(Vincent Mailhol)
- Improve UAPI testing to skip testing headers that require a libc
when CONFIG_CC_CAN_LINK is not set, opening up testing of headers
with no libc dependencies to more environments (Thomas Weißschuh)
- Update gendwarfksyms documentation with required dependencies
(Jihan LIN)
- Reject invalid LLVM= values to avoid unintentionally falling back
to system toolchain (Thomas Weißschuh)
- Add a script to help run the kernel build process in a container
for consistent environments and testing (Guillaume Tucker)
- Simplify kallsyms by getting rid of the relative base (Ard
Biesheuvel)
- Performance and usability improvements to scripts/make_fit.py
(Simon Glass)
- Minor various clean ups and fixes
Kconfig:
- Move XPM icons to individual files, clearing up GTK deprecation
warnings (Rostislav Krasny)
- Support
depends on FOO if BAR
as syntactic sugar for
depends on FOO || !BAR
(Nicolas Pitre, Graham Roff)
- Refactor merge_config.sh to use awk over shell/sed/grep,
dramatically speeding up processing large number of config
fragments (Anders Roxell, Mikko Rapeli)"
* tag 'kbuild-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux: (39 commits)
kbuild: remove dependency of run-command on config
scripts/make_fit: Compress dtbs in parallel
scripts/make_fit: Support a few more parallel compressors
kbuild: Support a FIT_EXTRA_ARGS environment variable
scripts/make_fit: Move dtb processing into a function
scripts/make_fit: Support an initial ramdisk
scripts/make_fit: Speed up operation
rust: kconfig: Don't require RUST_IS_AVAILABLE for rustc-option
MAINTAINERS: Add scripts/install.sh into Kbuild entry
modpost: Amend ppc64 save/restfpr symnames for -Os build
MIPS: tools: relocs: Ship a definition of R_MIPS_PC32
streamline_config.pl: remove superfluous exclamation mark
kbuild: dummy-tools: Add python3
scripts: kconfig: merge_config.sh: warn on duplicate input files
scripts: kconfig: merge_config.sh: use awk in checks too
scripts: kconfig: merge_config.sh: refactor from shell/sed/grep to awk
kallsyms: Get rid of kallsyms relative base
mips: Add support for PC32 relocations in vmlinux
Documentation: dev-tools: add container.rst page
scripts: add tool to run containerized builds
...
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
Pull MSI updates from Thomas Gleixner:
"Updates for the [PCI] MSI subsystem:
- Add interrupt redirection infrastructure
Some PCI controllers use a single demultiplexing interrupt for the
MSI interrupts of subordinate devices.
This prevents setting the interrupt affinity of device interrupts,
which causes device interrupts to be delivered to a single CPU.
That obviously is counterproductive for multi-queue devices and
interrupt balancing.
To work around this limitation the new infrastructure installs a
dummy irq_set_affinity() callback which captures the affinity mask
and picks a redirection target CPU out of the mask.
When the PCI controller demultiplexes the interrupts it invokes a
new handling function in the core, which either runs the interrupt
handler in the context of the target CPU or delegates it to
irq_work on the target CPU.
- Utilize the interrupt redirection mechanism in the PCI DWC host
controller driver.
This allows affinity control for the subordinate device MSI
interrupts instead of being randomly executed on the CPU which runs
the demultiplex handler.
- Replace the binary 64-bit MSI flag with a DMA mask
Some PCI devices have PCI_MSI_FLAGS_64BIT in the MSI capability,
but implement less than 64 address bits. This breaks on platforms
where such a device is assigned an MSI address higher than what's
supported.
With the binary 64-bit flag there is no other choice than disabling
64-bit MSI support which leaves the device disfunctional.
By using a DMA mask the address limit of a device can be described
correctly which provides support for the above scenario.
- Make use of the DMA mask based address limit in the hda/intel and
radeon drivers to enable them on affected platforms
- The usual small cleanups and improvements"
* tag 'irq-msi-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
ALSA: hda/intel: Make MSI address limit based on the device DMA limit
drm/radeon: Make MSI address limit based on the device DMA limit
PCI/MSI: Check the device specific address mask in msi_verify_entries()
PCI/MSI: Convert the boolean no_64bit_msi flag to a DMA address mask
genirq/redirect: Prevent writing MSI message on affinity change
PCI/MSI: Unmap MSI-X region on error
genirq: Update effective affinity for redirected interrupts
PCI: dwc: Enable MSI affinity support
PCI: dwc: Code cleanup
genirq: Add interrupt redirection infrastructure
genirq/msi: Correct kernel-doc in <linux/msi.h>
Pull rust updates from Miguel Ojeda:
"Toolchain and infrastructure:
- Add '__rust_helper' annotation to the C helpers
This is needed to inline these helpers into Rust code
- Remove imports available via the prelude, treewide
This was possible thanks to a new lint in Klint that Gary has
implemented -- more Klint-related changes, including initial
upstream support, are coming
- Deduplicate pin-init flags
'kernel' crate:
- Add support for calling a function exactly once with the new
'do_once_lite!' macro (and 'OnceLite' type)
Based on this, add 'pr_*_once!' macros to print only once
- Add 'impl_flags!' macro for defining common bitflags operations:
impl_flags!(
/// Represents multiple permissions.
#[derive(Debug, Clone, Default, Copy, PartialEq, Eq)]
pub struct Permissions(u32);
/// Represents a single permission.
#[derive(Debug, Clone, Copy, PartialEq, Eq)]
pub enum Permission {
/// Read permission.
Read = 1 << 0,
/// Write permission.
Write = 1 << 1,
/// Execute permission.
Execute = 1 << 2,
}
);
let mut f: Permissions = Permission::Read | Permission::Write;
assert!(f.contains(Permission::Read));
assert!(!f.contains(Permission::Execute));
f |= Permission::Execute;
assert!(f.contains(Permission::Execute));
let f2: Permissions = Permission::Write | Permission::Execute;
assert!((f ^ f2).contains(Permission::Read));
assert!(!(f ^ f2).contains(Permission::Write));
- 'bug' module: support 'CONFIG_DEBUG_BUGVERBOSE_DETAILED' in the
'warn_on!' macro in order to show the evaluated condition alongside
the file path:
------------[ cut here ]------------
WARNING: [val == 1] linux/samples/rust/rust_minimal.rs:27 at ...
Modules linked in: rust_minimal(+)
- Add safety module with 'unsafe_precondition_assert!' macro,
currently a wrapper for 'debug_assert!', intended to mark the
validation of safety preconditions where possible:
/// # Safety
///
/// The caller must ensure that `index` is less than `N`.
unsafe fn set_unchecked(&mut self, index: usize, value: T) {
unsafe_precondition_assert!(
index < N,
"set_unchecked() requires index ({index}) < N ({N})"
);
...
}
- Add instructions to 'build_assert!' documentation requesting to
always inline functions when used with function arguments
- 'ptr' module: replace 'build_assert!' with a 'const' one
- 'rbtree' module: reduce unsafe blocks on pointer derefs
- 'transmute' module: implement 'FromBytes' and 'AsBytes' for
inhabited ZSTs, and use it in Nova
- More treewide replacements of 'c_str!' with C string literals
'macros' crate:
- Rewrite most procedural macros ('module!', 'concat_idents!',
'#[export]', '#[vtable]', '#[kunit_tests]') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
This also allows to support '#[cfg]' properly in the '#[vtable]'
macro, to support arbitrary types in 'module!' macro (not just an
identifier) and to remove several custom parsing helpers we had
- Use 'quote!' from the recently vendored 'quote' library and remove
our custom one
The vendored one also allows us to avoid quoting '"' and '{}'
inside the template anymore and editors can now highlight it. In
addition, it improves robustness as it eliminates the need for
string quoting and escaping
- Use 'pin_init::zeroed()' to simplify KUnit code
'pin-init' crate:
- Rewrite all procedural macros ('[pin_]init!', '#[pin_data]',
'#[pinned_drop]', 'derive([Maybe]Zeroable)') to use the 'syn'
parsing library which we introduced last cycle, with better
diagnostics
- Implement 'InPlaceWrite' for '&'static mut MaybeUninit<T>'. This
enables users to use external allocation mechanisms such as
'static_cell'
- Support tuple structs in 'derive([Maybe]Zeroable)'
- Support attributes on fields in '[pin_]init!' (such as
'#[cfg(...)]')
- Add a '#[default_error(<type>)]' attribute to '[pin_]init!' to
override the default error (when no '? Error' is specified)
- Support packed structs in '[pin_]init!' with
'#[disable_initialized_field_access]'
- Remove 'try_[pin_]init!' in favor of merging their feature with
'[pin_]init!'. Update the kernel's own 'try_[pin_]init!' macros to
use the 'default_error' attribute
- Correct 'T: Sized' bounds to 'T: ?Sized' in the generated
'PinnedDrop' check by '#[pin_data]'
Documentation:
- Conclude the Rust experiment
MAINTAINERS:
- Add "RUST [RUST-ANALYZER]" entry for the rust-analyzer support.
Tamir and Jesung will take care of it. They have both been active
around it for a while. The new tree will flow through the Rust one
- Add Gary as maintainer for "RUST [PIN-INIT]"
- Update Boqun and Tamir emails to their kernel.org accounts
And a few other cleanups and improvements"
* tag 'rust-6.20-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux: (59 commits)
rust: safety: introduce `unsafe_precondition_assert!` macro
rust: add `impl_flags!` macro for defining common bitflag operations
rust: print: Add pr_*_once macros
rust: bug: Support DEBUG_BUGVERBOSE_DETAILED option
rust: print: Add support for calling a function exactly once
rust: kbuild: deduplicate pin-init flags
gpu: nova-core: remove imports available via prelude
rust: clk: replace `kernel::c_str!` with C-Strings
MAINTAINERS: Update my email address to @kernel.org
rust: macros: support `#[cfg]` properly in `#[vtable]` macro.
rust: kunit: use `pin_init::zeroed` instead of custom null value
rust: macros: rearrange `#[doc(hidden)]` in `module!` macro
rust: macros: allow arbitrary types to be used in `module!` macro
rust: macros: convert `#[kunit_tests]` macro to use `syn`
rust: macros: convert `concat_idents!` to use `syn`
rust: macros: convert `#[export]` to use `syn`
rust: macros: use `quote!` for `module!` macro
rust: macros: use `syn` to parse `module!` macro
rust: macros: convert `#[vtable]` macro to use `syn`
rust: macros: use `quote!` from vendored crate
...
Pull hardening updates from Kees Cook:
"Mostly small cleanups and various scattered annotations and flex array
warning fixes that we reviewed by unlanded in other trees. Introduces
new annotation for expanding counted_by to pointer members, now that
compiler behavior between GCC and Clang has been normalized.
- Various missed __counted_by annotations (Thorsten Blum)
- Various missed -Wflex-array-member-not-at-end fixes (Gustavo A. R.
Silva)
- Avoid leftover tempfiles for interrupted compile-time FORTIFY tests
(Nicolas Schier)
- Remove non-existant CONFIG_UBSAN_REPORT_FULL from docs (Stefan
Wiehler)
- fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
(David Laight)
- Add __counted_by_ptr attribute, tests, and first user (Bill
Wendling, Kees Cook)
- Update MAINTAINERS file to make hardening section not include
pstore"
* tag 'hardening-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
MAINTAINERS: pstore: Remove L: entry
nfp: tls: Avoid -Wflex-array-member-not-at-end warnings
carl9170: Avoid -Wflex-array-member-not-at-end warning
coredump: Use __counted_by_ptr for struct core_name::corename
lkdtm/bugs: Add __counted_by_ptr() test PTR_BOUNDS
compiler_types.h: Attributes: Add __counted_by_ptr macro
fortify: Cleanup temp file also on non-successful exit
fortify: Rename temporary file to match ignore pattern
fortify: Use C arithmetic not FIELD_xxx() in FORTIFY_REASON defines
ecryptfs: Annotate struct ecryptfs_message with __counted_by
fs/xattr: Annotate struct simple_xattr with __counted_by
crypto: af_alg - Annotate struct af_alg_iv with __counted_by
Kconfig.ubsan: Remove CONFIG_UBSAN_REPORT_FULL from documentation
drm/nouveau: fifo: Avoid -Wflex-array-member-not-at-end warning
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
Pull EFI updates from Ard Biesheuvel:
- Quirk the broken EFI framebuffer geometry on the Valve Steam Deck
- Capture the EDID information of the primary display also on non-x86
EFI systems when booting via the EFI stub.
* tag 'efi-next-for-v7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
efi: Support EDID information
sysfb: Move edid_info into sysfb_primary_display
sysfb: Pass sysfb_primary_display to devices
sysfb: Replace screen_info with sysfb_primary_display
sysfb: Add struct sysfb_display_info
efi: sysfb_efi: Reduce number of references to global screen_info
efi: earlycon: Reduce number of references to global screen_info
efi: sysfb_efi: Fix efidrmfb and simpledrmfb on Valve Steam Deck
efi: sysfb_efi: Convert swap width and height quirk to a callback
efi: sysfb_efi: Fix lfb_linelength calculation when applying quirks
efi: sysfb_efi: Replace open coded swap with the macro
Pull power management updates from Rafael Wysocki:
"By the number of commits, cpufreq is the leading party (again) and the
most visible change there is the removal of the omap-cpufreq driver
that has not been used for a long time (good riddance). There are also
quite a few changes in the cppc_cpufreq driver, mostly related to
fixing its frequency invariance engine in the case when the CPPC
registers used by it are not in PCC. In addition to that, support for
AM62L3 is added to the ti-cpufreq driver and the cpufreq-dt-platdev
list is updated for some platforms. The remaining cpufreq changes are
assorted fixes and cleanups.
Next up is cpuidle and the changes there are dominated by intel_idle
driver updates, mostly related to the new command line facility
allowing users to adjust the list of C-states used by the driver.
There are also a few updates of cpuidle governors, including two menu
governor fixes and some refinements of the teo governor, and a
MAINTAINERS update adding Christian Loehle as a cpuidle reviewer.
[Thanks for stepping up Christian!]
The most significant update related to system suspend and hibernation
is the one to stop freezing the PM runtime workqueue during system PM
transitions which allows some deadlocks to be avoided. There is also a
fix for possible concurrent bit field updates in the core device
suspend code and a few other minor fixes.
Apart from the above, several drivers are updated to discard the
return value of pm_runtime_put() which is going to be converted to a
void function as soon as everybody stops using its return value, PL4
support for Ice Lake is added to the Intel RAPL power capping driver,
and there are assorted cleanups, documentation fixes, and some
cpupower utility improvements.
Specifics:
- Remove the unused omap-cpufreq driver (Andreas Kemnade)
- Optimize error handling code in cpufreq_boost_trigger_state() and
make cpufreq_boost_trigger_state() return -EOPNOTSUPP if no policy
supports boost (Lifeng Zheng)
- Update cpufreq-dt-platdev list for tegra, qcom, TI (Aaron Kling,
Dhruva Gole, and Konrad Dybcio)
- Minor improvements to the cpufreq and cpumask rust implementation
(Alexandre Courbot, Alice Ryhl, Tamir Duberstein, and Yilin Chen)
- Add support for AM62L3 SoC to the ti-cpufreq driver (Dhruva Gole)
- Update arch_freq_scale in the CPPC cpufreq driver's frequency
invariance engine (FIE) in scheduler ticks if the related CPPC
registers are not in PCC (Jie Zhan)
- Assorted minor cleanups and improvements in ARM cpufreq drivers
(Juan Martinez, Felix Gu, Luca Weiss, and Sergey Shtylyov)
- Add generic helpers for sysfs show/store to cppc_cpufreq (Sumit
Gupta)
- Make the scaling_setspeed cpufreq sysfs attribute return the actual
requested frequency to avoid confusion (Pengjie Zhang)
- Simplify the idle CPU time granularity test in the ondemand cpufreq
governor (Frederic Weisbecker)
- Enable asym capacity in intel_pstate only when CPU SMT is not
possible (Yaxiong Tian)
- Update the description of rate_limit_us default value in cpufreq
documentation (Yaxiong Tian)
- Add a command line option to adjust the C-states table in the
intel_idle driver, remove the 'preferred_cstates' module parameter
from it, add C-states validation to it and clean it up (Artem
Bityutskiy)
- Make the menu cpuidle governor always check the time till the
closest timer event when the scheduler tick has been stopped to
prevent it from mistakenly selecting the deepest available idle
state (Rafael Wysocki)
- Update the teo cpuidle governor to avoid making suboptimal
decisions in certain corner cases and generally improve idle state
selection accuracy (Rafael Wysocki)
- Remove an unlikely() annotation on the early-return condition in
menu_select() that leads to branch misprediction 100% of the time
on systems with only 1 idle state enabled, like ARM64 servers
(Breno Leitao)
- Add Christian Loehle to MAINTAINERS as a cpuidle reviewer
(Christian Loehle)
- Stop flagging the PM runtime workqueue as freezable to avoid system
suspend and resume deadlocks in subsystems that assume asynchronous
runtime PM to work during system-wide PM transitions (Rafael
Wysocki)
- Drop redundant NULL pointer checks before acomp_request_free() from
the hibernation code handling image saving (Rafael Wysocki)
- Update wakeup_sources_walk_start() to handle empty lists of wakeup
sources as appropriate (Samuel Wu)
- Make dev_pm_clear_wake_irq() check the power.wakeirq value under
power.lock to avoid race conditions (Gui-Dong Han)
- Avoid bit field races related to power.work_in_progress in the core
device suspend code (Xuewen Yan)
- Make several drivers discard pm_runtime_put() return value in
preparation for converting that function to a void one (Rafael
Wysocki)
- Add PL4 support for Ice Lake to the Intel RAPL power capping driver
(Daniel Tang)
- Replace sprintf() with sysfs_emit() in power capping sysfs show
functions (Sumeet Pawnikar)
- Make dev_pm_opp_get_level() return value match the documentation
after a previous update of the latter (Aleks Todorov)
- Use scoped for each OF child loop in the OPP code (Krzysztof
Kozlowski)
- Fix a bug in an example code snippet and correct typos in the
energy model management documentation (Patrick Little)
- Fix miscellaneous problems in cpupower (Kaushlendra Kumar):
* idle_monitor: Fix incorrect value logged after stop
* Fix inverted APERF capability check
* Use strcspn() to strip trailing newline
* Reset errno before strtoull()
* Show C0 in idle-info dump
- Improve cpupower installation procedure by making the systemd step
optional and allowing users to disable the installation of
systemd's unit file (João Marcos Costa)"
* tag 'pm-6.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (65 commits)
PM: sleep: core: Avoid bit field races related to work_in_progress
PM: sleep: wakeirq: harden dev_pm_clear_wake_irq() against races
cpufreq: Documentation: Update description of rate_limit_us default value
cpufreq: intel_pstate: Enable asym capacity only when CPU SMT is not possible
PM: wakeup: Handle empty list in wakeup_sources_walk_start()
PM: EM: Documentation: Fix bug in example code snippet
Documentation: Fix typos in energy model documentation
cpuidle: governors: teo: Refine intercepts-based idle state lookup
cpuidle: governors: teo: Adjust the classification of wakeup events
cpufreq: ondemand: Simplify idle cputime granularity test
cpufreq: userspace: make scaling_setspeed return the actual requested frequency
PM: hibernate: Drop NULL pointer checks before acomp_request_free()
cpufreq: CPPC: Add generic helpers for sysfs show/store
cpufreq: scmi: Fix device_node reference leak in scmi_cpu_domain_id()
cpufreq: ti-cpufreq: add support for AM62L3 SoC
cpufreq: dt-platdev: Add ti,am62l3 to blocklist
cpufreq/amd-pstate: Add comment explaining nominal_perf usage for performance policy
cpufreq: scmi: correct SCMI explanation
cpufreq: dt-platdev: Block the driver from probing on more QC platforms
rust: cpumask: rename methods of Cpumask for clarity and consistency
...
drm-misc-fixes for v6.19 final:
nouveau
-------
Revert adding atomic commit functions as it regresses pre-nv50.
Fix bugs exposed by enabling 570 firmware.
gma500
------
Revert a regression caused by vblank changes.
mgag200
-------
Replace a busy loop with a polling loop to fix that blocking 1 cpu for 300 ms roughly every 20 minutes.
bridge
------
imx8mp-hdmi-pa: Use runtime pm to fix a bug in channel ordering.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/c0077ea5-faeb-4b0c-bd4a-ea2384d6dc0c@linux.intel.com
Firmware and monitoring tools may not be ready to receive a CPER when we
read the bad pages, so send the CPERs at the end of RAS initialization
to ensure that the FW is ready to receive and process the CPER. This
removes the previous CPER submission that was added during bad page
load, and sends both in-band and out-of-band at the same time.
Signed-off-by: Kent Russell <kent.russell@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The commit 6a23e7b433 ("drm/amd: Clean up kfd node on surprise
disconnect") introduced early KFD cleanup when drm_dev_is_unplugged()
returns true. However, this causes hangs during normal module unload
(rmmod amdgpu).
The issue occurs because drm_dev_unplug() is called in amdgpu_pci_remove()
for all removal scenarios, not just surprise disconnects. This was done
intentionally in commit 39934d3ed5 ("Revert "drm/amdgpu: TA unload
messages are not actually sent to psp when amdgpu is uninstalled"") to
fix IGT PCI software unplug test failures. As a result,
drm_dev_is_unplugged() returns true even during normal module unload,
triggering the early KFD cleanup inappropriately.
The correct check should distinguish between:
- Actual surprise disconnect (eGPU unplugged): pci_dev_is_disconnected()
returns true
- Normal module unload (rmmod): pci_dev_is_disconnected() returns false
Replace drm_dev_is_unplugged() with pci_dev_is_disconnected() to ensure
the early cleanup only happens during true hardware disconnect events.
Cc: stable@vger.kernel.org
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/b0c22deb-c0fa-3343-33cf-fd9a77d7db99@absolutedigital.net/
Fixes: 6a23e7b433 ("drm/amd: Clean up kfd node on surprise disconnect")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Returning DRM_GPU_SCHED_STAT_NO_HANG causes the scheduler
to add the bad job back the pending list. We've already
set the errors on the fence and killed the bad job at this point
so it's the correct behavior.
Acked-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
sdma ring reset is not supported in SRIOV. kfd driver does not check
reset mask, and could queue sdma ring reset during unmap_queues_cpsch.
Avoid the ring reset for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
