Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com> says:
This patchset contains few fixes for the bugs hit during testing with
Monza EVK platform
- around array out of bounds access on dai ids which keep extending but
the drivers seems to have hardcoded some numbers, fix this and clean
the mess up
- fix few issues discovered while trying to shut down dsp.
- flooding rpmsg with write requests due to not resetting queue pointer,
fix this resetting the pointer in trigger stop.
- possible multiple graph opens which can result in open failures.
Apart from this few new enhancements to the dsp side
- add new LPI MI2S and senary dai entries
- handle pipewire and Displayport issues by moving graph start to
trigger level, which should fix outstanding pipewire and DP issues on
Qualcomm SoCs.
- remove some unnessary loops in hot path
- support early memory map on DSP.
Tested this on top of linux-next on VENTUNO-Q platform.
Pull regulator fix from Mark Brown:
"Just one fix here from Hugo Villeneuve, the documentation for some of
the regulator DT properties had been cut'n'pasted so that if anyone
actually read it they'd be informed that those properties had
completely incorrect meanings"
* tag 'regulator-fix-v7.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: dt-bindings: fix typos in regulator-uv-* descriptions
Pull MTD fixes from Miquel Raynal:
- In SPI NOR, there was an issue with the RDCR capability, leading to
several platforms no longer capable of using it for wrong reasons
(the follow-up commit renames the helper to avoid future confusion)
- NAND controller drivers needed to be improved to fix some timings, a
locking schenario and avoid certain operations during panic writes
- The Spear600 DT binding conversion was done partially, leading to
several warnings which have individually been fixed
- Tudor gets replaced by Takahiro for the SPI NOR maintainance
- Plus two more misc fixes
* tag 'mtd/fixes-for-7.0-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
mtd: rawnand: pl353: make sure optimal timings are applied
mtd: spi-nor: Rename spi_nor_spimem_check_op()
mtd: spi-nor: Fix RDCR controller capability core check
mtd: rawnand: brcmnand: skip DMA during panic write
mtd: rawnand: serialize lock/unlock against other NAND operations
dt-bindings: mtd: st,spear600-smi: Fix example
dt-bindings: mtd: st,spear600-smi: #address/size-cells is mandatory
dt-bindings: mtd: st,spear600-smi: Fix description
mtd: rawnand: cadence: Fix error check for dma_alloc_coherent() in cadence_nand_init()
mtd: Avoid boot crash in RedBoot partition table parser
MAINTAINERS: add Takahiro Kuwano as SPI NOR reviewer
MAINTAINERS: remove Tudor Ambarus as SPI NOR maintainer
James Calligeros <jcalligeros99@gmail.com> says:
This series introduces some infrastructure to allow platform drivers
to specify what a DAI should be doing when it is not active on the
bus. The primary use case for this is configuring bus keepers which
may be integrated into various codecs. The instigating use case for
this functionality is an interesting bus topology on Apple Silicon
laptops with multiple codecs.
Most Apple Silicon laptops have six codecs split into groups of
three, driving a pair of dual opposed woofers and a tweeter for
L/R stereo sound. These codecs report the voltage and current across
their connected voice coils back to the SoC via the SDOUT pin,
represented as PCM data sent via configurable TDM slots. This data is
used in conjunction with the connected speaker's Thiele/Small Parameters
to ensure that the speaker is not being driven to levels that would
permanently damage them. This is integrated into CoreAudio on macOS.
speakersafetyd[1] handles this for Linux.
All of the codec SDOUT pins are attached to a single receiver port
on the SoC's I2S peripheral, however are split across two physical
data lines (one each for the left and right codec groups). The receiver
has an OR gate in front of it, which is used to sum the two lines.
If at any point a codec is trying to transmit data, and the "opposite"
line ends up floating high, the transmitting codec's data will be
corrupted. We need to guarantee that the idle line stays idle.
In the downstream Asahi Linux kernel[2], we set up one codec in each
group to zero-fill or pull down its line while a codec on the opposite
line is actively transmitting. This is done entirely in the codec
driver, however this approach is over-fit for this one use case. This
sort of functionality may also be of use for other hardware, so following
previous mailing list discussions[3], I have tried to expose the
functionality in a more configurable and generic way.
I have integrated this approach into our downstream platform driver
and select Devicetrees as an example of how this mechanism is intended
to be used[4].
[1] https://github.com/AsahiLinux/speakersafetyd
[2] https://github.com/AsahiLinux/linux/tree/bits/070-audio
[3] https://lore.kernel.org/asahi/20250227-apple-codec-changes-v3-17-cbb130030acf@gmail.com/
[4] https://github.com/chadmed/tree/tdm-revised2
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-0-c6ac5351489a@gmail.com
Add properties to describe TDM slot idle behaviour. These properties can
be used to describe how a DAI is supposed to behave when not active.
For example, Apple Silicon laptops split a single I2S bus between two
physical lines which are combined at an OR gate in front of the
receiving port. One codec on each line is expected to transmit zeroes
during the active TDM slots of the opposite line, or we will have corrupted
data at the receiver.
Signed-off-by: James Calligeros <jcalligeros99@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20260301-tdm-idle-slots-v3-3-c6ac5351489a@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Pull drm fixes from Dave Airlie:
"The weekly drm fixes. This is mostly msm fixes across the functions,
with amdgpu and i915. It also has a core rust fix and changes in
nova-core to take advantage of it, and otherwise just has some minor
driver fixes, and marks loongsoon as orphaned.
rust:
- Fix safety issue in dma_read! and dma_write!
nova-core:
- Fix UB in DmaGspMem pointer accessors
- Fix stack overflow in GSP memory allocation
loongsoon:
- mark drm driver as unmaintained
msm:
- Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
- DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM
reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
- DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels
with compression enabled
- DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
- GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
i915:
- Avoid hang when configuring VRR [icl]
- Fix sg_table overflow with >4GB folios
- Fix PSR Selective Update handling
- Fix eDP ALPM read-out sequence
amdgpu:
- SMU13 fix
- SMU14 fix
- Fixes for bringup hw testing
- Kerneldoc fix
- GC12 idle power fix for compute workloads
- DCCG fixes
amdkfd:
- Fix missing BO unreserve in an error path
ivpu:
- drop unnecessary bootparams register setting
amdxdna:
- fix runtime/suspend resume deadlock
bridge:
- ti-sn65dsi83: fix DSI rounding and dual LVDS
gud:
- fix NULL crtc dereference on display disable"
* tag 'drm-fixes-2026-03-14' of https://gitlab.freedesktop.org/drm/kernel: (44 commits)
drm/amd: Set num IP blocks to 0 if discovery fails
drm/amdkfd: Unreserve bo if queue update failed
drm/amd/display: Check for S0i3 to be done before DCCG init on DCN21
drm/amd/display: Add missing DCCG register entries for DCN20-DCN316
gpu: nova-core: gsp: fix UB in DmaGspMem pointer accessors
drm/loongson: Mark driver as orphaned
accel/amdxdna: Fix runtime suspend deadlock when there is pending job
gpu: nova-core: fix stack overflow in GSP memory allocation
accel/ivpu: Remove boot params address setting via MMIO register
drm/i915/dp: Read ALPM caps after DPCD init
drm/i915/psr: Write DSC parameters on Selective Update in ET mode
drm/i915/dsc: Add helper for writing DSC Selective Update ET parameters
drm/i915/dsc: Add Selective Update register definitions
drm/i915/psr: Repeat Selective Update area alignment
drm/i915: Fix potential overflow of shmem scatterlist length
drm/i915/vrr: Configure VRR timings after enabling TRANS_DDI_FUNC_CTL
drm/bridge: ti-sn65dsi83: halve horizontal syncs for dual LVDS output
drm/bridge: ti-sn65dsi83: fix CHA_DSI_CLK_RANGE rounding
drm/gud: fix NULL crtc dereference on display disable
drm/sitronix/st7586: fix bad pixel data due to byte swap
...
Pull spi fixes from Mark Brown:
"A couple of device ID and quirk updates, plus a bunch of small fixes
most of which (other than the Cadence one) are unremarkable error
handling fixes"
* tag 'spi-fix-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: atcspi200: Handle invalid buswidth and fix compiler warning
spi: dt-bindings: sun6i: Allow Dual SPI and Quad SPI for newer SoCs
spi: intel-pci: Add support for Nova Lake mobile SPI flash
spi: cadence-qspi: Fix requesting of APB and AHB clocks on JH7110
spi: rockchip-sfc: Fix double-free in remove() callback
spi: atcspi200: Fix double-free in atcspi_configure_dma()
spi: amlogic: spifc-a4: Fix DMA mapping error handling
Fixes for v7.0:
Core:
- Adjusted msm_iommu_pagetable_prealloc_allocate() allocation type
DPU:
- Fixed blue screens on Hamoa laptops by reverting the LM reservation
- Fixed the size of the LM block on several platforms
- Dropped usage of %pK (again)
- Fixed smatch warning on SSPP v13+ code
- Fixed INTF_6 interrupts on Lemans
DSI:
- Fixed DSI PHY revision on Kaanapali
- Fixed pixel clock calculation for the bonded DSI mode panels with
compression enabled
DT bindings:
- Fixed DisplayPort description on Glymur
- Fixed model name in SM8750 MDSS schema
GPU:
- Added MODULE_DEVICE_TABLE to the GPU driver
- Fix bogus protect error on X2-85
- Fix dma_free_attrs() buffer size
- Gen8 UBWC fix for Glymur
From: Rob Clark <rob.clark@oss.qualcomm.com>
Link: https://patch.msgid.link/CACSVV00wZ95gFDLfzJ0Ywb8rsjPSjZ1aHdwE4smnyuZ=Fg-g8Q@mail.gmail.com
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pull powerpc fixes from Madhavan Srinivasan:
- Correct MSI allocation tracking
- Always use 64 bits PTE for powerpc/e500
- Fix inline assembly for clang build on PPC32
- Fixes for clang build issues in powerpc64/ftrace
- Fixes for powerpc64/bpf JIT and tailcall support
- Cleanup MPC83XX devicetrees
- Fix keymile vendor prefix
- Fix to use big-endian types for crash variables
Thanks to Abhishek Dubey, Christophe Leroy (CS GROUP), Hari Bathini,
Heiko Schocher, J. Neuschäfer, Mahesh Salgaonkar, Nam Cao, Nilay Shroff,
Rob Herring (Arm), Saket Kumar Bhaskar, Sourabh Jain, Stan Johnson, and
Venkat Rao Bagalkote.
* tag 'powerpc-7.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (23 commits)
powerpc/pseries: Correct MSI allocation tracking
powerpc: dts: mpc83xx: Add unit addresses to /memory
powerpc: dts: mpc8315erdb: Add missing #cells properties to SPI bus
powerpc: dts: mpc8315erdb: Rename LED nodes to comply with schema
powerpc: dts: mpc8315erdb: Use IRQ_TYPE_* macros
powerpc: dts: mpc8313erdb: Use IRQ_TYPE_* macros
powerpc: 83xx: km83xx: Fix keymile vendor prefix
dt-bindings: powerpc: Add Freescale/NXP MPC83xx SoCs
powerpc64/bpf: fix kfunc call support
powerpc64/bpf: fix handling of BPF stack in exception callback
powerpc64/bpf: remove BPF redzone protection in trampoline stack
powerpc64/bpf: use consistent tailcall offset in trampoline
powerpc64/bpf: fix the address returned by bpf_get_func_ip
powerpc64/bpf: do not increment tailcall count when prog is NULL
powerpc64/ftrace: workaround clang recording GEP in __patchable_function_entries
powerpc64/ftrace: fix OOL stub count with clang
powerpc64: make clang cross-build friendly
powerpc/crash: adjust the elfcorehdr size
powerpc/kexec/core: use big-endian types for crash variables
powerpc/prom_init: Fixup missing #size-cells on PowerMac media-bay nodes
...
Example is wrong, the reg property of the flash is always matching the
node name.
Fixes: 68cd8ef484 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
These properties must be set because they overwrite the default values,
especially #size-cells which is 0 for most controllers and is 'const: 1'
here.
Fixes: 68cd8ef484 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The description mixes two nodes. There is the controller, and there is
the flash. Describe the flash (which itself can be considered an mtd
device, unlike the top level controller), and move the st,smi-fast-mode
property inside, as this property is flash specific and should not live
in the parent controller node.
Fixes: 68cd8ef484 ("dt-bindings: mtd: st,spear600-smi: convert to DT schema")
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Support for Dual SPI and Quad SPI was added to the Linux driver in
commit 0605d9fb41 ("spi: sun6i: add quirk for dual and quad SPI modes
support") and commit 25453d797d ("spi: sun6i: add dual and quad SPI
modes support for R329/D1/R528/T113s").
However the binding was never updated to allow these modes. Allow them
by adding 2 and 4 to the allowed bus widths for the newer variants.
While at it, also add 0 to the allowed bus widths. This signals that
RX or TX is not available, i.e. the MISO or MOSI pin is disconnected.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
Link: https://patch.msgid.link/20260302153559.3199783-2-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Sen Wang <sen@ti.com>:
Just two minor patches that aim to tidy up the code a little bit,
as well as fix the aux_div selection in davinci_mcasp_calc_clk_div()
for mid-range dividers (33 <= div <= 4096).
Sen Wang (2):
ASoC: ti: davinci-mcasp: extract mcasp_is_auxclk_enabled() helper
ASoC: ti: davinci-mcasp: improve aux_div selection for mid-range dividers
sound/soc/ti/davinci-mcasp.c | 45 +++++++++++++++++++++++++-----------
1 file changed, 31 insertions(+), 14 deletions(-)
--
2.43.0
Pull hwmon fixes from Guenter Roeck:
- Fix initialization commands for AHT20
- Correct a malformed email address (emc1403)
- Check the it87_lock() return value
- Fix inverted polarity (max6639)
- Fix overflows, underflows, sign extension, and other problems in
macsmc
- Fix stack overflow in debugfs read (pmbus/q54sj108a2)
- Drop support for SMARC-sAM67 (discontinued and never released to
market)
* tag 'hwmon-for-v7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (pmbus/q54sj108a2) fix stack overflow in debugfs read
hwmon: (max6639) fix inverted polarity
dt-bindings: hwmon: sl28cpld: Drop sa67mcu compatible
hwmon: (it87) Check the it87_lock() return value
Revert "hwmon: add SMARC-sAM67 support"
hwmon: (aht10) Fix initialization commands for AHT20
hwmon: (emc1403) correct a malformed email address
hwmon: (macsmc) Fix overflows, underflows, and sign extension
hwmon: (macsmc) Fix regressions in Apple Silicon SMC hwmon driver
Pull sound fixes from Takashi Iwai:
"Again a collection of device-specific fixes. Most of changes are
fairly small device-specific quirks of fixes for HD- and USB-audio,
ASoC Intel, AMD, fsl, Cirrus and co.
The only large LOC is for plumbing ASoC ACP driver to add the Cirrus
Logic codec support, so this one is also just adding some tables"
* tag 'sound-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: us122l: drop redundant interface references
ASoC: amd: yc: Add DMI quirk for ASUS EXPERTBOOK PM1503CDA
ASoC: dt-bindings: renesas,rz-ssi: Document RZ/G3L SoC
ASoC: SDCA: Add allocation failure check for Entity name
ALSA: hda/senary: Ensure EAPD is enabled during init
ALSA: hda/senary: Use codec->core.afg for GPIO access
ALSA: doc: usb-audio: Add doc for QUIRK_FLAG_SKIP_IFACE_SETUP
ASoC: dt-bindings: tegra: Add compatible for Tegra238 sound card
ALSA: hda/hdmi: Add Tegra238 HDA codec device ID
ASoC: cs35l56: Suppress pointless warning about number of GPIO pulls
ASoC: amd: acp: Add ACP6.3 match entries for Cirrus Logic parts
ASoC: Intel: sof_sdw: Add quirk for Alienware Area 51 (2025) 0CCD SKU
ASoC: rt1321: fix DMIC ch2/3 mask issue
ASoC: cs35l56: Only patch ASP registers if the DAI is part of a DAIlink
ASoC: fsl_easrc: Fix event generation in fsl_easrc_iec958_set_reg()
ASoC: fsl_easrc: Fix event generation in fsl_easrc_iec958_put_bits()
ALSA: firewire: dice: Fix printf warning with W=1
ALSA: hda/tas2781: A workaround solution to lower-vol issue among lower calibrated-impedance micro-speaker on TAS2781
ALSA: hda/realtek: Add quirk for HP Pavilion 15-eh1xxx to enable mute LED
ALSA: usb-audio: Add iface reset and delay quirk for AB13X USB Audio
...
The Glymur platform has four DisplayPort controllers. The hardware
supports four streams (MST) per controller. However, on Glymur the first
three controllers only have two streams wired to the display subsystem,
while the fourth controller operates in single-stream mode.
Add a dedicated clause for the Glymur compatible to require the register
ranges for all four stream blocks, while allowing either one pixel clock
(for the single-stream controller) or two pixel clocks (for the remaining
controllers).
Update the Glymur MDSS schema example by adding the missing p2, p3,
mst2link and mst3link register blocks. Without these, the bindings
validation fails. Also replace the made-up register addresses with the
actual addresses from the first controller to match the SoC devicetree
description.
Cc: stable@vger.kernel.org # v6.19
Fixes: 8f63bf9082 ("dt-bindings: display: msm: Document the Glymur DiplayPort controller")
Fixes: 1aee577bbc ("dt-bindings: display: msm: Document the Glymur Mobile Display SubSystem")
Signed-off-by: Abel Vesa <abel.vesa@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/708518/
Link: https://lore.kernel.org/r/20260303-glymur-fix-dp-bindings-reg-clocks-v4-1-1ebd9c7c2cee@oss.qualcomm.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Pull networking fixes from Jakub Kicinski:
"Including fixes from CAN, netfilter and wireless.
Current release - new code bugs:
- sched: cake: fixup cake_mq rate adjustment for diffserv config
- wifi: fix missing ieee80211_eml_params member initialization
Previous releases - regressions:
- tcp: give up on stronger sk_rcvbuf checks (for now)
Previous releases - always broken:
- net: fix rcu_tasks stall in threaded busypoll
- sched:
- fq: clear q->band_pkt_count[] in fq_reset()
- only allow act_ct to bind to clsact/ingress qdiscs and shared
blocks
- bridge: check relevant per-VLAN options in VLAN range grouping
- xsk: fix fragment node deletion to prevent buffer leak
Misc:
- spring cleanup of inactive maintainers"
* tag 'net-7.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (138 commits)
xdp: produce a warning when calculated tailroom is negative
net: enetc: use truesize as XDP RxQ info frag_size
libeth, idpf: use truesize as XDP RxQ info frag_size
i40e: use xdp.frame_sz as XDP RxQ info frag_size
i40e: fix registering XDP RxQ info
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
ice: fix rxq info registering in mbuf packets
xsk: introduce helper to determine rxq->frag_size
xdp: use modulo operation to calculate XDP frag tailroom
selftests/tc-testing: Add tests exercising act_ife metalist replace behaviour
net/sched: act_ife: Fix metalist update behavior
selftests: net: add test for IPv4 route with loopback IPv6 nexthop
net: ipv6: fix panic when IPv4 route references loopback IPv6 nexthop
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
MAINTAINERS: remove Thomas Falcon from IBM ibmvnic
MAINTAINERS: remove Claudiu Manoil and Alexandre Belloni from Ocelot switch
MAINTAINERS: replace Taras Chornyi with Elad Nachman for Marvell Prestera
MAINTAINERS: remove Jonathan Lemon from OpenCompute PTP
MAINTAINERS: replace Clark Wang with Frank Li for Freescale FEC
...
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Currently, we set a predefined codec component name in a DAI link. But
the codec name may contain an index which is not fixed. This series
suggest using partial match the codec name to fix the issue.
Pull spi fixes from Mark Brown:
"One fix for the stm32 driver which got broken for DMA chaining cases,
plus a removal of some straggling bindings for the Bikal SoC which has
been pulled out of the kernel"
* tag 'spi-fix-v7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: stm32: fix missing pointer assignment in case of dma chaining
spi: dt-bindings: snps,dw-abp-ssi: Remove unused bindings
