The new name better reflects the function's behavior, emphasizing that
it will terminate execution if allocation fails.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Commit c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address
spaces") introduced a large_allowed() helper that restricts which mapping
modes can use large pages. This change unintentionally prevented KASAN
shadow mappings from using large pages, despite there being no reason
to avoid them. In fact, large pages are preferred for performance.
Since commit d8073dc6bc ("s390/mm: Allow large pages only for aligned
physical addresses"), both can_large_pud() and can_large_pmd() call _pa()
to check if large page physical addresses are aligned. However, _pa()
has a side effect: it allocates memory in POPULATE_KASAN_MAP_SHADOW
mode.
Rename large_allowed() to large_page_mapping_allowed() and add
POPULATE_KASAN_MAP_SHADOW to the allowed list to restore large page
mappings for KASAN shadows.
While large_page_mapping_allowed() isn't strictly necessary with current
mapping modes since disallowed modes either don't map anything or fail
alignment and size checks, keep it for clarity.
Rename _pa() to resolve_pa_may_alloc() for clarity and to emphasize
existing side effect. Rework can_large_pud()/can_large_pmd() to take
the side effect into consideration and actually return physical address
instead of just checking conditions.
Fixes: c98d2ecae0 ("s390/mm: Uncouple physical vs virtual address spaces")
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
The maximum number of load/store watchpoints and fetch instruction
watchpoints is 14 each according to LoongArch Reference Manual, so
extend the maximum number of watchpoints from 8 to 14 for ptrace.
By the way, just simply change 8 to 14 for the definition in struct
user_watch_state at the beginning, but it may corrupt uapi, then add
a new struct user_watch_state_v2 directly.
As far as I can tell, the only users for this struct in the userspace
are GDB and LLDB, there are no any problems of software compatibility
between the application and kernel according to the analysis.
The compatibility problem has been considered while developing and
testing. When the applications in the userspace get watchpoint state,
the length will be specified which is no bigger than the sizeof struct
user_watch_state or user_watch_state_v2, the actual length is assigned
as the minimal value of the application and kernel in the generic code
of ptrace:
kernel/ptrace.c: ptrace_regset():
kiov->iov_len = min(kiov->iov_len,
(__kernel_size_t) (regset->n * regset->size));
if (req == PTRACE_GETREGSET)
return copy_regset_to_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
else
return copy_regset_from_user(task, view, regset_no, 0,
kiov->iov_len, kiov->iov_base);
For example, there are four kind of combinations, all of them work well.
(1) "older kernel + older gdb", the actual length is 8+(8+8+4+4)*8=200;
(2) "newer kernel + newer gdb", the actual length is 8+(8+8+4+4)*14=344;
(3) "older kernel + newer gdb", the actual length is 8+(8+8+4+4)*8=200;
(4) "newer kernel + older gdb", the actual length is 8+(8+8+4+4)*8=200.
Link: https://loongson.github.io/LoongArch-Documentation/LoongArch-Vol1-EN.html#control-and-status-registers-related-to-watchpoints
Cc: stable@vger.kernel.org
Fixes: 1a69f7a161 ("LoongArch: ptrace: Expose hardware breakpoints to debuggers")
Reviewed-by: WANG Xuerui <git@xen0n.name>
Reviewed-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
We need to switch SFB (Store Fill Buffer) and TSO (Total Store Order)
state at runtime to debug memory management and KVM virtualization, so
add two debugfs entries "sfb_state" and "tso_state" under the directory
/sys/kernel/debug/loongarch.
Query SFB:
cat /sys/kernel/debug/loongarch/sfb_state
Enable SFB:
echo 1 > /sys/kernel/debug/loongarch/sfb_state
Disable SFB:
echo 0 > /sys/kernel/debug/loongarch/sfb_state
Query TSO:
cat /sys/kernel/debug/loongarch/tso_state
Switch TSO:
echo [TSO] > /sys/kernel/debug/loongarch/tso_state
Available [TSO] states:
0 (No Load No Store) 1 (All Load No Store) 3 (Same Load No Store)
4 (No Load All Store) 5 (All Load All Store) 7 (Same Load All Store)
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
The enable_gpe_wakeup() function calls acpi_enable_all_wakeup_gpes(),
and the later one may call the preempt_schedule_common() function,
resulting in a thread switch and causing the CPU to be in an interrupt
enabled state after the enable_gpe_wakeup() function returns, leading
to the warnings as follow.
[ C0] WARNING: ... at kernel/time/timekeeping.c:845 ktime_get+0xbc/0xc8
[ C0] ...
[ C0] Call Trace:
[ C0] [<90000000002243b4>] show_stack+0x64/0x188
[ C0] [<900000000164673c>] dump_stack_lvl+0x60/0x88
[ C0] [<90000000002687e4>] __warn+0x8c/0x148
[ C0] [<90000000015e9978>] report_bug+0x1c0/0x2b0
[ C0] [<90000000016478e4>] do_bp+0x204/0x3b8
[ C0] [<90000000025b1924>] exception_handlers+0x1924/0x10000
[ C0] [<9000000000343bbc>] ktime_get+0xbc/0xc8
[ C0] [<9000000000354c08>] tick_sched_timer+0x30/0xb0
[ C0] [<90000000003408e0>] __hrtimer_run_queues+0x160/0x378
[ C0] [<9000000000341f14>] hrtimer_interrupt+0x144/0x388
[ C0] [<9000000000228348>] constant_timer_interrupt+0x38/0x48
[ C0] [<90000000002feba4>] __handle_irq_event_percpu+0x64/0x1e8
[ C0] [<90000000002fed48>] handle_irq_event_percpu+0x20/0x80
[ C0] [<9000000000306b9c>] handle_percpu_irq+0x5c/0x98
[ C0] [<90000000002fd4a0>] generic_handle_domain_irq+0x30/0x48
[ C0] [<9000000000d0c7b0>] handle_cpu_irq+0x70/0xa8
[ C0] [<9000000001646b30>] handle_loongarch_irq+0x30/0x48
[ C0] [<9000000001646bc8>] do_vint+0x80/0xe0
[ C0] [<90000000002aea1c>] finish_task_switch.isra.0+0x8c/0x2a8
[ C0] [<900000000164e34c>] __schedule+0x314/0xa48
[ C0] [<900000000164ead8>] schedule+0x58/0xf0
[ C0] [<9000000000294a2c>] worker_thread+0x224/0x498
[ C0] [<900000000029d2f0>] kthread+0xf8/0x108
[ C0] [<9000000000221f28>] ret_from_kernel_thread+0xc/0xa4
[ C0]
[ C0] ---[ end trace 0000000000000000 ]---
The root cause is acpi_enable_all_wakeup_gpes() uses a mutex to protect
acpi_hw_enable_all_wakeup_gpes(), and acpi_ut_acquire_mutex() may cause
a thread switch. Since there is no longer concurrent execution during
loongarch_acpi_suspend(), we can call acpi_hw_enable_all_wakeup_gpes()
directly in enable_gpe_wakeup().
The solution is similar to commit 22db06337f ("ACPI: sleep: Avoid
breaking S3 wakeup due to might_sleep()").
Fixes: 366bb35a8e ("LoongArch: Add suspend (ACPI S3) support")
Signed-off-by: Qunqin Zhao <zhaoqunqin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Switch away from using sha1 for module signing by default and use the
more modern sha512 instead, which is what among others Arch, Fedora,
RHEL, and Ubuntu are currently using for their kernels.
Sha1 has not been considered secure against well-funded opponents since
2005[1]; since 2011 the NIST and other organizations furthermore
recommended its replacement[2]. This is why OpenSSL on RHEL9, Fedora
Linux 41+[3], and likely some other current and future distributions
reject the creation of sha1 signatures, which leads to a build error of
allmodconfig configurations:
80A20474797F0000:error:03000098:digital envelope routines:do_sigver_init:invalid digest:crypto/evp/m_sigver.c:342:
make[4]: *** [.../certs/Makefile:53: certs/signing_key.pem] Error 1
make[4]: *** Deleting file 'certs/signing_key.pem'
make[4]: *** Waiting for unfinished jobs....
make[3]: *** [.../scripts/Makefile.build:478: certs] Error 2
make[2]: *** [.../Makefile:1936: .] Error 2
make[1]: *** [.../Makefile:224: __sub-make] Error 2
make[1]: Leaving directory '...'
make: *** [Makefile:224: __sub-make] Error 2
This change makes allmodconfig work again and sets a default that is
more appropriate for current and future users, too.
Link: https://www.schneier.com/blog/archives/2005/02/cryptanalysis_o.html [1]
Link: https://csrc.nist.gov/projects/hash-functions [2]
Link: https://fedoraproject.org/wiki/Changes/OpenSSLDistrustsha1SigVer [3]
Signed-off-by: Thorsten Leemhuis <linux@leemhuis.info>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: kdevops <kdevops@lists.linux.dev> [0]
Link: https://github.com/linux-kdevops/linux-modules-kpd/actions/runs/11420092929/job/31775404330 [0]
Link: https://lore.kernel.org/r/52ee32c0c92afc4d3263cea1f8a1cdc809728aff.1729088288.git.linux@leemhuis.info
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
The debugfs directory should be created when a device
is probed, not when it is registered. It should be removed
when the device is removed, not when it is unregistered.
Fixes: d06905d686 ("i2c: add core-managed per-client directory in debugfs")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The addition of target mode causes a build failure when CONFIG_I2C_SLAVE
is turned off:
drivers/i2c/busses/i2c-imx-lpi2c.c:1273:10: error: 'const struct i2c_algorithm' has no member named 'reg_target'
1273 | .reg_target = lpi2c_imx_register_target,
| ^~~~~~~~~~
drivers/i2c/busses/i2c-imx-lpi2c.c:1274:10: error: 'const struct i2c_algorithm' has no member named 'unreg_target'
1274 | .unreg_target = lpi2c_imx_unregister_target,
| ^~~~~~~~~~~~
Select the Kconfig symbol like we do for other similar drivers.
Fixes: 1ee867e465 ("i2c: imx-lpi2c: add target mode support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Carlos Song <carlos.song@nxp.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Commit 78966b550289 ("s390: pgtable: add statistics for PUD and P4D level
page table") misses the call to pagetable_p4d_ctor() against a newly
allocated P4D table in crst_table_upgrade();
Commit 68c601de75d8 ("mm: introduce ctor/dtor at PGD level") misses the
call to pagetable_pgd_ctor() against a newly allocated PGD and the call to
pagetable_dtor() against a newly allocated P4D that is about to be freed
on crst_table_upgrade() PGD upgrade fail path.
The missed constructors and destructor break (at least) the page table
accounting when a process memory space is upgraded.
Link: https://lkml.kernel.org/r/20250123160349.200154-1-agordeev@linux.ibm.com
Fixes: 78966b550289 ("s390: pgtable: add statistics for PUD and P4D level page table")
Fixes: 68c601de75d8 ("mm: introduce ctor/dtor at PGD level")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reported-by: Heiko Carstens <hca@linux.ibm.com>
Closes: https://lore.kernel.org/all/20250122074954.8685-A-hca@linux.ibm.com/
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Acked-by: Qi Zheng <zhengqi.arch@bytedance.com>
Reviewed-by: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The comment removed in this patch originally belonged to the
build_zonelists_in_zone_order() function, which was introduced by commit
f0c0b2b808 ("change zonelist order: zonelist order selection logic").
Later, commit c9bff3eebc ("mm, page_alloc: rip out ZONELIST_ORDER_ZONE")
removed build_zonelists_in_zone_order() but left its comment behind.
Subsequently, commit 9d3be21bf9 ("mm, page_alloc: simplify zonelist
initialization") moved the node_order variable into build_zonelists(),
making the comment originally belonged to build_zonelists_in_zone_order()
appear as if it were part of build_zonelists().
Remove this misleading comment.
Link: https://lkml.kernel.org/r/20250115041634.63387-1-yuntao.wang@linux.dev
Signed-off-by: Yuntao Wang <yuntao.wang@linux.dev>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
For each accessed chunk a PTE is created. More than 1GiB of PTEs is used
in this way. Remove each PTE after validating a chunk to reduce peak
memory usage.
It is important to only unmap memory that previously mmap()ed, as
unmapping other mappings like the stack, heap or executable mappings will
crash the process.
The mappings read from /proc/self/maps and the return values from mmap()
don't allow a simple correlation due to merging and no guaranteed order.
To correlate the pointers and mappings use prctl(PR_SET_VMA_ANON_NAME).
While it introduces a test dependency, other alternatives would introduce
runtime or development overhead.
Link: https://lkml.kernel.org/r/20250114-virtual_address_range-tests-v4-2-6fd7269934a5@linutronix.de
Fixes: 0104096498 ("selftests/mm: confirm VA exhaustion without reliance on correctness of mmap()")
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: kernel test robot <oliver.sang@intel.com>
Cc: Shuah Khan (Samsung OSG) <shuah@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add RWF_DONTCACHE as a read operation flag, which means that any data read
wil be removed from the page cache upon completion. Uses the page cache
to synchronize, and simply prunes folios that were instantiated when the
operation completes. While it would be possible to use private pages for
this, using the page cache as synchronization is handy for a variety of
reasons:
1) No special truncate magic is needed
2) Async buffered reads need some place to serialize, using the page
cache is a lot easier than writing extra code for this
3) The pruning cost is pretty reasonable
and the code to support this is much simpler as a result.
You can think of uncached buffered IO as being the much more attractive
cousin of O_DIRECT - it has none of the restrictions of O_DIRECT. Yes, it
will copy the data, but unlike regular buffered IO, it doesn't run into
the unpredictability of the page cache in terms of reclaim. As an
example, on a test box with 32 drives, reading them with buffered IO looks
as follows:
Reading bs 65536, uncached 0
1s: 145945MB/sec
2s: 158067MB/sec
3s: 157007MB/sec
4s: 148622MB/sec
5s: 118824MB/sec
6s: 70494MB/sec
7s: 41754MB/sec
8s: 90811MB/sec
9s: 92204MB/sec
10s: 95178MB/sec
11s: 95488MB/sec
12s: 95552MB/sec
13s: 96275MB/sec
where it's quite easy to see where the page cache filled up, and
performance went from good to erratic, and finally settles at a much
lower rate. Looking at top while this is ongoing, we see:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7535 root 20 0 267004 0 0 S 3199 0.0 8:40.65 uncached
3326 root 20 0 0 0 0 R 100.0 0.0 0:16.40 kswapd4
3327 root 20 0 0 0 0 R 100.0 0.0 0:17.22 kswapd5
3328 root 20 0 0 0 0 R 100.0 0.0 0:13.29 kswapd6
3332 root 20 0 0 0 0 R 100.0 0.0 0:11.11 kswapd10
3339 root 20 0 0 0 0 R 100.0 0.0 0:16.25 kswapd17
3348 root 20 0 0 0 0 R 100.0 0.0 0:16.40 kswapd26
3343 root 20 0 0 0 0 R 100.0 0.0 0:16.30 kswapd21
3344 root 20 0 0 0 0 R 100.0 0.0 0:11.92 kswapd22
3349 root 20 0 0 0 0 R 100.0 0.0 0:16.28 kswapd27
3352 root 20 0 0 0 0 R 99.7 0.0 0:11.89 kswapd30
3353 root 20 0 0 0 0 R 96.7 0.0 0:16.04 kswapd31
3329 root 20 0 0 0 0 R 96.4 0.0 0:11.41 kswapd7
3345 root 20 0 0 0 0 R 96.4 0.0 0:13.40 kswapd23
3330 root 20 0 0 0 0 S 91.1 0.0 0:08.28 kswapd8
3350 root 20 0 0 0 0 S 86.8 0.0 0:11.13 kswapd28
3325 root 20 0 0 0 0 S 76.3 0.0 0:07.43 kswapd3
3341 root 20 0 0 0 0 S 74.7 0.0 0:08.85 kswapd19
3334 root 20 0 0 0 0 S 71.7 0.0 0:10.04 kswapd12
3351 root 20 0 0 0 0 R 60.5 0.0 0:09.59 kswapd29
3323 root 20 0 0 0 0 R 57.6 0.0 0:11.50 kswapd1
[...]
which is just showing a partial list of the 32 kswapd threads that are
running mostly full tilt, burning ~28 full CPU cores.
If the same test case is run with RWF_DONTCACHE set for the buffered read,
the output looks as follows:
Reading bs 65536, uncached 0
1s: 153144MB/sec
2s: 156760MB/sec
3s: 158110MB/sec
4s: 158009MB/sec
5s: 158043MB/sec
6s: 157638MB/sec
7s: 157999MB/sec
8s: 158024MB/sec
9s: 157764MB/sec
10s: 157477MB/sec
11s: 157417MB/sec
12s: 157455MB/sec
13s: 157233MB/sec
14s: 156692MB/sec
which is just chugging along at ~155GB/sec of read performance. Looking
at top, we see:
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
7961 root 20 0 267004 0 0 S 3180 0.0 5:37.95 uncached
8024 axboe 20 0 14292 4096 0 R 1.0 0.0 0:00.13 top
where just the test app is using CPU, no reclaim is taking place outside
of the main thread. Not only is performance 65% better, it's also using
half the CPU to do it.
Link: https://lkml.kernel.org/r/20241220154831.1086649-9-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add a folio_unmap_invalidate() helper, which unmaps and invalidates a
given folio. The caller must already have locked the folio. Embed the
old invalidate_complete_folio2() helper in there as well, as nobody else
calls it.
Use this new helper in invalidate_inode_pages2_range(), rather than
duplicate the code there.
In preparation for using this elsewhere as well, have it take a gfp_t mask
rather than assume GFP_KERNEL is the right choice. This bubbles back to
invalidate_complete_folio2() as well.
Link: https://lkml.kernel.org/r/20241220154831.1086649-7-axboe@kernel.dk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Chris Mason <clm@meta.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
