In a prior patch, we removed the bpf_cpumask_any() and
bpf_cpumask_any_and() kfuncs, and replaced them with
bpf_cpumask_any_distribute() and bpf_cpumask_any_distribute_and().
The advertised semantics between the two kfuncs were identical, with the
former always returning the first CPU, and the latter actually returning
any CPU.
This patch updates the selftests for these kfuncs to use the new names.
Signed-off-by: David Vernet <void@manifault.com>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/r/20230610035053.117605-4-void@manifault.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add tests for the hostfs filesystems to make sure it has a consistent
inode management, which is required for Landlock's file hierarchy
identification. This adds 5 new tests for layout3_fs with the hostfs
variant.
Add hostfs to the new (architecture-specific) config.um file.
The hostfs filesystem, only available for an User-Mode Linux kernel, is
special because we cannot explicitly mount it. The layout3_fs.hostfs
variant tests are skipped if the current test directory is not backed by
this filesystem.
The layout3_fs.hostfs.tag_inode_dir_child and
layout3_fs.hostfs.tag_inode_file tests pass thanks to a previous commit
fixing hostfs inode management. Without this fix, the deny-by-default
policy would apply and all access requests would be denied.
Link: https://lore.kernel.org/r/20230612191430.339153-7-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add generic and read-only tests for 6 pseudo filesystems to make sure
they have a consistent inode management, which is required for
Landlock's file hierarchy identification:
- tmpfs
- ramfs
- cgroup2
- proc
- sysfs
Update related kernel configuration to support these new filesystems,
remove useless CONFIG_SECURITY_PATH, and sort all entries. If these
filesystems are not supported by the kernel running tests, the related
tests are skipped.
Expanding variants, this adds 25 new tests for layout3_fs:
- tag_inode_dir_parent
- tag_inode_dir_mnt
- tag_inode_dir_child
- tag_inode_dir_file
- release_inodes
Test coverage for security/landlock with kernel debug code:
- 94.7% of 835 lines according to gcc/gcov-12
- 93.0% of 852 lines according to gcc/gcov-13
Test coverage for security/landlock without kernel debug code:
- 95.5% of 624 lines according to gcc/gcov-12
- 93.1% of 641 lines according to gcc/gcov-13
Link: https://lore.kernel.org/r/20230612191430.339153-6-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
Add and use a layout0 test fixture to not populate the tmpfs filesystem
if it is not required for tests: unknown_access_rights, proc_nsfs,
unpriv and max_layers.
This doesn't change these tests but it speeds up their setup and makes
them less prone to error. This prepare the ground for a next commit.
Link: https://lore.kernel.org/r/20230612191430.339153-3-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
The xarray.c file contains the only call to radix_tree_node_rcu_free(),
and it comes with its own extern declaration for it. This means the
function definition causes a missing-prototype warning:
lib/radix-tree.c:288:6: error: no previous prototype for 'radix_tree_node_rcu_free' [-Werror=missing-prototypes]
Instead, move the declaration for this function to a new header that can
be included by both, and do the same for the radix_tree_node_cachep
variable that has the same underlying problem but does not cause a warning
with gcc.
[zhangpeng.00@bytedance.com: fix building radix tree test suite]
Link: https://lkml.kernel.org/r/20230521095450.21332-1-zhangpeng.00@bytedance.com
Link: https://lkml.kernel.org/r/20230516194212.548910-1-arnd@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter reported invalid check for calloc() result in
test_verifier.c:get_xlated_program():
./tools/testing/selftests/bpf/test_verifier.c:1365 get_xlated_program()
warn: variable dereferenced before check 'buf' (see line 1364)
./tools/testing/selftests/bpf/test_verifier.c
1363 *cnt = xlated_prog_len / buf_element_size;
1364 *buf = calloc(*cnt, buf_element_size);
1365 if (!buf) {
This should be if (!*buf) {
1366 perror("can't allocate xlated program buffer");
1367 return -ENOMEM;
This commit refactors the get_xlated_program() to avoid using double
pointer type.
Fixes: 933ff53191 ("selftests/bpf: specify expected instructions in test_verifier tests")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Closes: https://lore.kernel.org/bpf/ZH7u0hEGVB4MjGZq@moroto/
Link: https://lore.kernel.org/bpf/20230609221637.2631800-1-eddyz87@gmail.com
The iproute2 output that eventually landed upstream is different than
the one used in this test, resulting in failures. Fix by adjusting the
test to use iproute2's JSON output, which is more stable than regular
output.
Fixes: 305c041899 ("selftests: net: vxlan: Add tests for vxlan nolocalbypass option.")
Signed-off-by: Vladimir Nikishkin <vladimir@nikishkin.pw>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the new listener events linked to the path-manager
introduced by commit f8c9dfbd87 ("mptcp: add pm listener events").
It is possible to look for "mptcp_event_pm_listener" in kallsyms to know
in advance if the kernel supports this feature and skip these sub-tests
if the feature is not supported.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6c73008aa3 ("selftests: mptcp: listener test for userspace PM")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the MPTCP Userspace PM introduced by commit 4638de5aef
("mptcp: handle local addrs announced by userspace PMs").
We can skip all these tests if the feature is not supported simply by
looking for the MPTCP pm_type's sysctl knob.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 259a834fad ("selftests: mptcp: functional tests for the userspace PM type")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is TCP_INQ cmsg support introduced in commit 2c9e77659a
("mptcp: add TCP_INQ cmsg support").
It is possible to look for "mptcp_ioctl" in kallsyms because it was
needed to introduce the mentioned feature. We can skip these tests and
not set TCPINQ option if the feature is not supported.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5cbd886ce2 ("selftests: mptcp: add TCP_INQ support")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.
It is possible to look for "mptcp_diag_fill_info" in kallsyms because
it is introduced by the mentioned feature. So we can know in advance if
the feature is supported and skip the sub-test if not.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ce9979129a ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the getsockopt(SOL_MPTCP) to get info about the MPTCP
connections introduced by commit 55c42fa7fa ("mptcp: add MPTCP_INFO
getsockopt") and the following ones.
We cannot guess in advance which sizes the kernel will returned: older
kernel can returned smaller sizes, e.g. recently the tcp_info structure
has been modified in commit 71fc704768 ("tcp: add rcv_wnd and
plb_rehash to TCP_INFO") where a new field has been added.
The userspace can also expect a smaller size if it is compiled with old
uAPI kernel headers.
So for these sizes, we can only check if they are above a certain
threshold, 0 for the moment. We can also only compared sizes with the
ones set by the kernel.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ce9979129a ("selftests: mptcp: add mptcp getsockopt test cases")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the fullmesh flag that can be given to the MPTCP
in-kernel path-manager and introduced in commit 2843ff6f36 ("mptcp:
remote addresses fullmesh").
If the flag is not visible in the dump after having set it, we don't
check the content. Note that if we expect to have this feature and
SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var is set to 1, we always
check the content to avoid regressions.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 6da1dfdd03 ("selftests: mptcp: add set_flags tests in pm_netlink.sh")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the checks of the default limits returned by the MPTCP
in-kernel path-manager. The default values have been modified by commit
72bcbc46a5 ("mptcp: increase default max additional subflows to 2").
Instead of comparing with hardcoded values, we can get the default one
and compare with them.
Note that if we expect to have the latest version, we continue to check
the hardcoded values to avoid unexpected behaviour changes.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: eedbc68532 ("selftests: add PM netlink functional tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the reporting of the MPTCP sockets being used, introduced
by commit c558246ee7 ("mptcp: add statistics for mptcp socket in use").
Similar to the parent commit, it looks like there is no good pre-check
to do here, i.e. dedicated function available in kallsyms. Instead, we
try to get info and if nothing is returned, the test is marked as
skipped.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: e04a30f788 ("selftest: mptcp: add test for mptcp socket in use")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the listen diag dump support introduced by
commit 4fa39b701c ("mptcp: listen diag dump support").
It looks like there is no good pre-check to do here, i.e. dedicated
function available in kallsyms. Instead, we try to get info if nothing
is returned, the test is marked as skipped.
That's not ideal because something could be wrong with the feature and
instead of reporting an error, the test could be marked as skipped. If
we know in advanced that the feature is supposed to be supported, the
tester can set SELFTESTS_MPTCP_LIB_EXPECT_ALL_FEATURES env var to 1: in
this case the test will report an error instead of marking the test as
skipped if nothing is returned.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: f2ae0fa68e ("selftests/mptcp: add diag listen tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of TCP_FASTOPEN socket option with MPTCP
connections introduced by commit 4ffb0a0234 ("mptcp: add TCP_FASTOPEN
sock option").
It is possible to look for "mptcp_fastopen_" in kallsyms to know if the
feature is supported or not.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: ca7ae89160 ("selftests: mptcp: mptfo Initiator/Listener")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the full support of disconnections from the userspace
introduced by commit b29fcfb54c ("mptcp: full disconnect
implementation").
It is possible to look for "mptcp_pm_data_reset" in kallsyms because a
preparation patch added it to ease the introduction of the mentioned
feature.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 05be5e273c ("selftests: mptcp: add disconnect tests")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
One of them is the support of IP(V6)_TRANSPARENT socket option with
MPTCP connections introduced by commit c9406a23c1 ("mptcp: sockopt:
add SOL_IP freebind & transparent options").
It is possible to look for "__ip_sock_set_tos" in kallsyms because
IP(V6)_TRANSPARENT socket option support has been added after TOS
support which came with the required infrastructure in MPTCP sockopt
code. To support TOS, the following function has been exported (T). Not
great but better than checking for a specific kernel version.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 5fb62e9cd3 ("selftests: mptcp: add tproxy test case")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Selftests are supposed to run on any kernels, including the old ones not
supporting all MPTCP features.
New functions are now available to easily detect if a certain feature is
missing by looking at kallsyms.
These new helpers are going to be used in the following commits. In
order to ease the backport of such future patches, it would be good if
this patch is backported up to the introduction of MPTCP selftests,
hence the Fixes tag below: this type of check was supposed to be done
from the beginning.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Fixes: 048d19d444 ("mptcp: add basic kselftest for mptcp")
Cc: stable@vger.kernel.org
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Let's add a new test for checking whether GUP long-term page pinning works
as expected (R/O vs. R/W, MAP_PRIVATE vs. MAP_SHARED, GUP vs.
GUP-fast). Note that COW handling with long-term R/O pinning in private
mappings, and pinning of anonymous memory in general, is tested by the COW
selftest. This test, therefore, focuses on page pinning in file mappings.
The most interesting case is probably the "local tmpfile" case, as that
will likely end up on a "real" filesystem such as ext4 or xfs, not on a
virtual one like tmpfs or hugetlb where any long-term page pinning is
always expected to succeed.
For now, only add tests that use the "/sys/kernel/debug/gup_test"
interface. We'll add tests based on liburing separately next.
[akpm@linux-foundation.org: update .gitignore for gup_longterm, per Peter]
Link: https://lkml.kernel.org/r/20230519102723.185721-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "selftests/mm: new test for FOLL_LONGTERM on file mappings".
Let's add some selftests to make sure that:
* R/O long-term pinning always works of file mappings
* R/W long-term pinning always works in MAP_PRIVATE file mappings
* R/W long-term pinning only works in MAP_SHARED mappings with special
filesystems (shmem, hugetlb) and fails with other filesystems (ext4, btrfs,
xfs).
The tests make use of the gup_test kernel module to trigger ordinary GUP
and GUP-fast, and liburing (similar to our COW selftests). Test with
memfd, memfd hugetlb, tmpfile() and mkstemp(). The latter usually gives
us a "real" filesystem (ext4, btrfs, xfs) where long-term pinning is
expected to fail.
Note that these selftests don't contain any actual reproducers for data
corruptions in case R/W long-term pinning on problematic filesystems
"would" work.
Maybe we can later come up with a racy !FOLL_LONGTERM reproducer that can
reuse an existing interface to trigger short-term pinning (I'll look into
that next).
On current mm/mm-unstable:
# ./gup_longterm
# [INFO] detected hugetlb page size: 2048 KiB
# [INFO] detected hugetlb page size: 1048576 KiB
TAP version 13
1..50
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd
ok 1 Should have worked
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with tmpfile
ok 2 Should have worked
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with local tmpfile
ok 3 Should have failed
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 4 Should have worked
# [RUN] R/W longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 5 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd
ok 6 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with tmpfile
ok 7 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with local tmpfile
ok 8 Should have failed
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 9 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 10 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd
ok 11 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with tmpfile
ok 12 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with local tmpfile
ok 13 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 14 Should have worked
# [RUN] R/O longterm GUP pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 15 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd
ok 16 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with tmpfile
ok 17 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with local tmpfile
ok 18 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 19 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 20 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd
ok 21 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with tmpfile
ok 22 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with local tmpfile
ok 23 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 24 Should have worked
# [RUN] R/W longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 25 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd
ok 26 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with tmpfile
ok 27 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with local tmpfile
ok 28 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 29 Should have worked
# [RUN] R/W longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 30 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd
ok 31 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with tmpfile
ok 32 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with local tmpfile
ok 33 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 34 Should have worked
# [RUN] R/O longterm GUP pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 35 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd
ok 36 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with tmpfile
ok 37 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with local tmpfile
ok 38 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 39 Should have worked
# [RUN] R/O longterm GUP-fast pin in MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 40 Should have worked
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd
ok 41 Should have worked
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with tmpfile
ok 42 Should have worked
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with local tmpfile
ok 43 Should have failed
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd hugetlb (2048 kB)
ok 44 Should have worked
# [RUN] io_uring fixed buffer with MAP_SHARED file mapping ... with memfd hugetlb (1048576 kB)
ok 45 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd
ok 46 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with tmpfile
ok 47 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with local tmpfile
ok 48 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd hugetlb (2048 kB)
ok 49 Should have worked
# [RUN] io_uring fixed buffer with MAP_PRIVATE file mapping ... with memfd hugetlb (1048576 kB)
ok 50 Should have worked
# Totals: pass:50 fail:0 xfail:0 xpass:0 skip:0 error:0
This patch (of 3):
Let's factor detection out into vm_util, to be reused by a new test.
Link: https://lkml.kernel.org/r/20230519102723.185721-1-david@redhat.com
Link: https://lkml.kernel.org/r/20230519102723.185721-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lstoakes@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The test on MIPS stopped working after I upgraded some of my toolchains
to use the ones from kernel.org because the mips toolchain defaults to
big endian, even though it supports both endians. Let's just add an
explicit -EL to make sure it always succeeds like the kernel does.
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Right now skipped and failed test counts are not reported, and a few
times already we missed skipped ones that ought not to. Let's now
count each category and continue to invite the user to check the
report file when skipped+fail > 0. E.g:
$ make run-user
(...)
CC nolibc-test
136 test(s) passed, 2 skipped, 0 failed. See all results in .../run.out
Note that it's important to be careful about the trailing \r on the qemu
output (thanks Zhangjin for noticing).
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
These 2 test cases are added to cover the normal using scenes of
gettimeofday().
They have been used to trigger and fix up such issue with nolibc:
nolibc-test.c:(.text.gettimeofday+0x54): undefined reference to `__aeabi_ldivmod'
This issue happens while there is no "unsigned int" conversion in the
coming new clock_gettime / clock_gettime64 syscall path of
gettimeofday():
tv->tv_usec = ts.tv_nsec / 1000;
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/280867a8-7601-4a96-9b85-87668e1f1282@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
In the clock_gettime / clock_gettime64 syscalls based gettimeofday(),
there is no way to let kernel space 'fixup' the invalid data pointer of
'struct timeval' and 'struct timezone' for us for we need to read
timespec from kernel space and then convert to timeval in user-space
ourselves and also we need to simply ignore and reset timezone in
user-space.
Without this removal, the invalid (void *)1 address will trigger a
sigsegv (signum = 11) signal and stop the whole test.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/linux-riscv/20230528113325.GJ1956@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
nolibc now has INT_MAX in stdint.h, so, don't mix INT_MAX and
__INT_MAX__, unify them to INT_MAX.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
When compile nolibc-test.c with 2.31 glibc, we got such error:
In file included from /usr/riscv64-linux-gnu/include/sys/cdefs.h:452,
from /usr/riscv64-linux-gnu/include/features.h:461,
from /usr/riscv64-linux-gnu/include/bits/libc-header-start.h:33,
from /usr/riscv64-linux-gnu/include/limits.h:26,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/limits.h:194,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/syslimits.h:7,
from /usr/lib/gcc-cross/riscv64-linux-gnu/9/include/limits.h:34,
from /labs/linux-lab/src/linux-stable/tools/testing/selftests/nolibc/nolibc-test.c:6:
/usr/riscv64-linux-gnu/include/bits/wordsize.h:28:3: error: #error "rv32i-based targets are not supported"
28 | # error "rv32i-based targets are not supported"
Glibc (>= 2.33) commit 5b6113d62efa ("RISC-V: Support the 32-bit ABI
implementation") fixed up above error.
As suggested by Thomas, defining INT_MIN/INT_MAX for nolibc can remove
the including of limits.h, and therefore no above error. of course, the
other libcs still require limits.h, move it to the right place.
The LONG_MIN/LONG_MAX are also defined too.
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/09d60dc2-e298-4c22-8e2f-8375861bd9be@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Compiling nolibc-test.c with gcc on x86_64 got such warning:
tools/testing/selftests/nolibc/nolibc-test.c: In function ‘expect_eq’:
tools/testing/selftests/nolibc/nolibc-test.c:177:24: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 2 has type ‘uint64_t’ {aka ‘long unsigned int’} [-Wformat=]
177 | llen += printf(" = %lld ", expr);
| ~~~^ ~~~~
| | |
| | uint64_t {aka long unsigned int}
| long long int
| %ld
It because that glibc defines uint64_t as "unsigned long int" when word
size (means sizeof(long)) is 64bit (see include/bits/types.h), but
nolibc directly use the 64bit "unsigned long long" (see
tools/include/nolibc/stdint.h), which is simpler, seems kernel uses it
too (include/uapi/asm-generic/int-ll64.h).
use a simple conversion to solve it.
Suggested-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/linux-riscv/20230529130449.GA2813@1wt.eu/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The opensbi package from Ubuntu 20.04 only provides rv64 firmwares:
$ dpkg -S opensbi | grep -E "fw_.*bin|fw_.*elf" | uniq
opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.bin
opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.bin
opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_dynamic.elf
opensbi: /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf
To run this nolibc test for rv32, users must build opensbi or download a
prebuilt one from qemu repository:
https://gitlab.com/qemu-project/qemu/-/blob/master/pc-bios/opensbi-riscv32-generic-fw_dynamic.bin
And then use -bios to tell qemu use it to avoid such failure:
$ qemu-system-riscv32 -display none -no-reboot -kernel /path/to/arch/riscv/boot/Image -serial stdio -M virt -append "console=ttyS0 panic=-1"
qemu-system-riscv32: Unable to load the RISC-V firmware "opensbi-riscv32-generic-fw_dynamic.bin"
To run from makefile, QEMU_ARGS_EXTRA is added to allow pass extra
arguments like -bios:
$ make run QEMU_ARGS_EXTRA="-bios /path/to/opensbi-riscv32-generic-fw_dynamic.bin" ...
Suggested-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/2ab94136-d341-4a26-964e-6d6c32e66c9b@t-8ch.de/
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
On 32bit platforms size_t is not enough to represent [u]int_fast64_t.
Fixes: 3e9fd4e9a1 ("tools/nolibc: add integer types and integer limit macros")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
running nolibc-test with glibc on x86_64 got such print issue:
29 execve_root = -1 EACCES [OK]
30 fork30 fork = 0 [OK]
31 getdents64_root = 712 [OK]
The fork test case has three printf calls:
(1) llen += printf("%d %s", test, #name);
(2) llen += printf(" = %d %s ", expr, errorname(errno));
(3) llen += pad_spc(llen, 64, "[FAIL]\n"); --> vfprintf()
In the following scene, the above issue happens:
(a) The parent calls (1)
(b) The parent calls fork()
(c) The child runs and shares the print buffer of (1)
(d) The child exits, flushs the print buffer and closes its own stdout/stderr
* "30 fork" is printed at the first time.
(e) The parent calls (2) and (3), with "\n" in (3), it flushs the whole buffer
* "30 fork = 0 ..." is printed
Therefore, there are two "30 fork" in the stdout.
Between (a) and (b), if flush the stdout (and the sterr), the child in
stage (c) will not be able to 'see' the print buffer.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
There were two exactly similar occurrences of this test.
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Keep backwards compatibility through unions.
The compatibility macros like
#define st_atime st_atim.tv_sec
as documented in stat(3type) don't work for nolibc because it would
break with other stat-like structures that contain the field st_atime.
The stx_atime, stx_mtime, stx_ctime are in type of 'struct
statx_timestamp', which is incompatible with 'struct timespec', should
be converted explicitly.
/* include/uapi/linux/stat.h */
struct statx_timestamp {
__s64 tv_sec;
__u32 tv_nsec;
__s32 __reserved;
};
/* include/uapi/linux/time.h */
struct timespec {
__kernel_old_time_t tv_sec; /* seconds */
long tv_nsec; /* nanoseconds */
};
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/linux-riscv/3a3edd48-1ace-4c89-89e8-9c594dd1b3c9@t-8ch.de/
Co-authored-by: Zhangjin Wu <falcon@tinylab.org>
Signed-off-by: Zhangjin Wu <falcon@tinylab.org>
[wt: squashed Zhangjin & Thomas' patches into one to preserve "bisectability"]
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
The child process forked during stackprotector tests intentionally gets
killed with SIGABRT. By default this will trigger writing a coredump.
The writing of the coredump can spam the systems coredump machinery and
take some time.
Timings for the full run of nolibc-test:
Before: 200ms
After: 20ms
This is on a desktop x86 system with systemd-coredumpd enabled.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
