Add unit tests for new ldsx insns. The test includes sign-extension
with a single value or with a value range.
If cpuv4 is not supported due to
(1) older compiler, e.g., less than clang version 18, or
(2) test runner test_progs and test_progs-no_alu32 which tests
cpu v2 and v3, or
(3) non-x86_64 arch not supporting new insns in jit yet,
a dummy program is added with below output:
#318/1 verifier_ldsx/cpuv4 is not supported by compiler or jit, use a dummy test:OK
#318 verifier_ldsx:OK
to indicate the test passed with a dummy test instead of actually
testing cpuv4. I am using a dummy prog to avoid changing the
verifier testing infrastructure. Once clang 18 is widely available
and other architectures support cpuv4, at least for CI run,
the dummy program can be removed.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011304.3719139-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Similar to no-alu32 runner, if clang compiler supports -mcpu=v4,
a cpuv4 runner is created to test bpf programs compiled with
-mcpu=v4.
The following are some num-of-insn statistics for each newer
instructions based on existing selftests, excluding subsequent
cpuv4 insn specific tests.
insn pattern # of instructions
reg = (s8)reg 4
reg = (s16)reg 4
reg = (s32)reg 144
reg = *(s8 *)(reg + off) 13
reg = *(s16 *)(reg + off) 14
reg = *(s32 *)(reg + off) 15215
reg = bswap16 reg 142
reg = bswap32 reg 38
reg = bswap64 reg 14
reg s/= reg 0
reg s%= reg 0
gotol <offset> 58
Note that in llvm -mcpu=v4 implementation, the compiler is a little
bit conservative about generating 'gotol' insn (32-bit branch offset)
as it didn't precise count the number of insns (e.g., some insns are
debug insns, etc.). Compared to old 'goto' insn, newer 'gotol' insn
should have comparable verification states to 'goto' insn.
With current patch set, all selftests passed with -mcpu=v4
when running test_progs-cpuv4 binary. The -mcpu=v3 and -mcpu=v2 run
are also successful.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20230728011250.3718252-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from can, netfilter.
Current release - regressions:
- core: fix splice_to_socket() for O_NONBLOCK socket
- af_unix: fix fortify_panic() in unix_bind_bsd().
- can: raw: fix lockdep issue in raw_release()
Previous releases - regressions:
- tcp: reduce chance of collisions in inet6_hashfn().
- netfilter: skip immediate deactivate in _PREPARE_ERROR
- tipc: stop tipc crypto on failure in tipc_node_create
- eth: igc: fix kernel panic during ndo_tx_timeout callback
- eth: iavf: fix potential deadlock on allocation failure
Previous releases - always broken:
- ipv6: fix bug where deleting a mngtmpaddr can create a new
temporary address
- eth: ice: fix memory management in ice_ethtool_fdir.c
- eth: hns3: fix the imp capability bit cannot exceed 32 bits issue
- eth: vxlan: calculate correct header length for GPE
- eth: stmmac: apply redundant write work around on 4.xx too"
* tag 'net-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (49 commits)
tipc: stop tipc crypto on failure in tipc_node_create
af_unix: Terminate sun_path when bind()ing pathname socket.
tipc: check return value of pskb_trim()
benet: fix return value check in be_lancer_xmit_workarounds()
virtio-net: fix race between set queues and probe
net/sched: mqprio: Add length check for TCA_MQPRIO_{MAX/MIN}_RATE64
splice, net: Fix splice_to_socket() for O_NONBLOCK socket
net: fec: tx processing does not call XDP APIs if budget is 0
mptcp: more accurate NL event generation
selftests: mptcp: join: only check for ip6tables if needed
tools: ynl-gen: fix parse multi-attr enum attribute
tools: ynl-gen: fix enum index in _decode_enum(..)
netfilter: nf_tables: disallow rule addition to bound chain via NFTA_RULE_CHAIN_ID
netfilter: nf_tables: skip immediate deactivate in _PREPARE_ERROR
netfilter: nft_set_rbtree: fix overlap expiration walk
igc: Fix Kernel Panic during ndo_tx_timeout callback
net: dsa: qca8k: fix mdb add/del case with 0 VID
net: dsa: qca8k: fix broken search_and_del
net: dsa: qca8k: fix search_and_insert wrong handling of new rule
net: dsa: qca8k: enable use_single_write for qca8xxx
...
This adds MSG_PEEK test for SOCK_SEQPACKET. It works in the same way as
SOCK_STREAM test, except it also tests MSG_TRUNC flag.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This new version makes test more complicated by adding empty read,
partial read and data comparisons between MSG_PEEK and normal reads.
Signed-off-by: Arseniy Krasnov <AVKrasnov@sberdevices.ru>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We use two programs to check that the new reuseport logic is executed
appropriately.
The first is a TC clsact program which bpf_sk_assigns
the skb to a UDP or TCP socket created by user space. Since the test
communicates via lo we see both directions of packets in the eBPF.
Traffic ingressing to the reuseport socket is identified by looking
at the destination port. For TCP, we additionally need to make sure
that we only assign the initial SYN packets towards our listening
socket. The network stack then creates a request socket which
transitions to ESTABLISHED after the 3WHS.
The second is a reuseport program which shares the fact that
it has been executed with user space. This tells us that the delayed
lookup mechanism is working.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Co-developed-by: Lorenz Bauer <lmb@isovalent.com>
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Cc: Joe Stringer <joe@cilium.io>
Link: https://lore.kernel.org/r/20230720-so-reuseport-v6-8-7021b683cdae@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Run as ./proc_filter -f to run new filter code. Run without "-f" to run
usual proc connector code without the new filtering code.
Signed-off-by: Anjali Kulkarni <anjali.k.kulkarni@oracle.com>
Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull sound fixes from Takashi Iwai:
"A pile of fixes that have been gathered since the previous pull. Most
of changes are device-specific, and nothing looks too scary.
- A memory leak fix in ALSA sequencer code in 6.5-rc
- Many fixes for ASoC Qualcomm CODEC drivers, covering SoundWire
probe problems
- A series of ASoC AMD fixes
- A few fixes and cleanups of selftest stuff
- HD-audio codec fixes and quirks for Clevo, HP, Lenovo, Dell"
* tag 'sound-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
ALSA: hda/realtek: Add support for DELL Oasis 13/14/16 laptops
ALSA: hda/realtek: Fix generic fixup definition for cs35l41 amp
ALSA: hda/realtek: Enable Mute LED on HP Laptop 15s-eq2xxx
selftests: ALSA: Add test-pcmtest-driver to .gitignore
ALSA: hda/realtek: Add quirk for Clevo NS70AU
ASoC: fsl_sai: Disable bit clock with transmitter
ALSA: seq: Fix memory leak at error path in snd_seq_create_port()
ASoC: SOF: ipc3-dtrace: uninitialized data in dfsentry_trace_filter_write()
ASoC: cs42l51: fix driver to properly autoload with automatic module loading
MAINTAINERS: Redo addition of ssm3515 to APPLE SOUND
ASoC: rt5640: Fix the issue of speaker noise
ALSA: hda/realtek - remove 3k pull low procedure
selftests: ALSA: Fix fclose on an already fclosed file pointer
ALSA: pcmtest: Don't use static storage to track per device data
ALSA: pcmtest: Convert to platform remove callback returning void
ASoC: dt-bindings: audio-graph-card2: Drop incomplete example
ASoC: dt-bindings: Update maintainer email id
ASoC: amd: ps: Fix extraneous error messages
ASoC: fsl_sai: Revert "ASoC: fsl_sai: Enable MCTL_MCLK_EN bit for master mode"
ASoC: codecs: SND_SOC_WCD934X should select REGMAP_IRQ
...
Support for enslaving ports to LAGs with uppers will be added in the
following patches. Selftests to make sure it actually does the right thing
are ready and will be sent as a follow-up.
Similarly, ordering of MACVLAN creation and RIF creation will be relaxed
and it will be permitted to create a MACVLAN first.
Thus these two tests are obsolete. Drop them.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases for hash threshold (multipath) nexthop groups with invalid
neighbors. Check that a nexthop with invalid neighbor is not selected when
there is another nexthop with a valid neighbor. Check that there is no
crash when there is no nexthop with a valid neighbor.
The first test fails before the previous commit in this series.
Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20230719-nh_select-v2-4-04383e89f868@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from BPF, netfilter, bluetooth and CAN.
Current release - regressions:
- eth: r8169: multiple fixes for PCIe ASPM-related problems
- vrf: fix RCU lockdep splat in output path
Previous releases - regressions:
- gso: fall back to SW segmenting with GSO_UDP_L4 dodgy bit set
- dsa: mv88e6xxx: do a final check before timing out when polling
- nf_tables: fix sleep in atomic in nft_chain_validate
Previous releases - always broken:
- sched: fix undoing tcf_bind_filter() in multiple classifiers
- bpf, arm64: fix BTI type used for freplace attached functions
- can: gs_usb: fix time stamp counter initialization
- nft_set_pipapo: fix improper element removal (leading to UAF)
Misc:
- net: support STP on bridge in non-root netns, STP prevents packet
loops so not supporting it results in freezing systems of
unsuspecting users, and in turn very upset noises being made
- fix kdoc warnings
- annotate various bits of TCP state to prevent data races"
* tag 'net-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: phy: prevent stale pointer dereference in phy_init()
tcp: annotate data-races around fastopenq.max_qlen
tcp: annotate data-races around icsk->icsk_user_timeout
tcp: annotate data-races around tp->notsent_lowat
tcp: annotate data-races around rskq_defer_accept
tcp: annotate data-races around tp->linger2
tcp: annotate data-races around icsk->icsk_syn_retries
tcp: annotate data-races around tp->keepalive_probes
tcp: annotate data-races around tp->keepalive_intvl
tcp: annotate data-races around tp->keepalive_time
tcp: annotate data-races around tp->tsoffset
tcp: annotate data-races around tp->tcp_tx_delay
Bluetooth: MGMT: Use correct address for memcpy()
Bluetooth: btusb: Fix bluetooth on Intel Macbook 2014
Bluetooth: SCO: fix sco_conn related locking and validity issues
Bluetooth: hci_conn: return ERR_PTR instead of NULL when there is no link
Bluetooth: hci_sync: Avoid use-after-free in dbg for hci_remove_adv_monitor()
Bluetooth: coredump: fix building with coredump disabled
Bluetooth: ISO: fix iso_conn related locking and validity issues
Bluetooth: hci_event: call disconnect callback before deleting conn
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2023-07-19
We've added 45 non-merge commits during the last 3 day(s) which contain
a total of 71 files changed, 7808 insertions(+), 592 deletions(-).
The main changes are:
1) multi-buffer support in AF_XDP, from Maciej Fijalkowski,
Magnus Karlsson, Tirthendu Sarkar.
2) BPF link support for tc BPF programs, from Daniel Borkmann.
3) Enable bpf_map_sum_elem_count kfunc for all program types,
from Anton Protopopov.
4) Add 'owner' field to bpf_rb_node to fix races in shared ownership,
Dave Marchevsky.
5) Prevent potential skb_header_pointer() misuse, from Alexei Starovoitov.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (45 commits)
bpf, net: Introduce skb_pointer_if_linear().
bpf: sync tools/ uapi header with
selftests/bpf: Add mprog API tests for BPF tcx links
selftests/bpf: Add mprog API tests for BPF tcx opts
bpftool: Extend net dump with tcx progs
libbpf: Add helper macro to clear opts structs
libbpf: Add link-based API for tcx
libbpf: Add opts-based attach/detach/query API for tcx
bpf: Add fd-based tcx multi-prog infra with link support
bpf: Add generic attach/detach/query API for multi-progs
selftests/xsk: reset NIC settings to default after running test suite
selftests/xsk: add test for too many frags
selftests/xsk: add metadata copy test for multi-buff
selftests/xsk: add invalid descriptor test for multi-buffer
selftests/xsk: add unaligned mode test for multi-buffer
selftests/xsk: add basic multi-buffer test
selftests/xsk: transmit and receive multi-buffer packets
xsk: add multi-buffer documentation
i40e: xsk: add TX multi-buffer support
ice: xsk: Tx multi-buffer support
...
====================
Link: https://lore.kernel.org/r/20230719175424.75717-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf 2023-07-19
We've added 4 non-merge commits during the last 1 day(s) which contain
a total of 3 files changed, 55 insertions(+), 10 deletions(-).
The main changes are:
1) Fix stack depth check in presence of async callbacks,
from Kumar Kartikeya Dwivedi.
2) Fix BTI type used for freplace attached functions,
from Alexander Duyck.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, arm64: Fix BTI type used for freplace attached functions
selftests/bpf: Add more tests for check_max_stack_depth bug
bpf: Repeat check_max_stack_depth for async callbacks
bpf: Fix subprog idx logic in check_max_stack_depth
====================
Link: https://lore.kernel.org/r/20230719174502.74023-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, when running ZC test suite, after finishing first run of test
suite and then switching to busy-poll tests within xskxceiver, such
errors are observed:
libbpf: Kernel error message: ice: MTU is too large for linear frames and XDP prog does not support frags
1..26
libbpf: Kernel error message: Native and generic XDP can't be active at the same time
Error attaching XDP program
not ok 1 [xskxceiver.c:xsk_reattach_xdp:1568]: ERROR: 17/"File exists"
this is because test suite ends with 9k MTU and native xdp program being
loaded. Busy-poll tests start non-multi-buffer tests for generic mode.
To fix this, let us introduce bash function that will reset NIC settings
to default (e.g. 1500 MTU and no xdp progs loaded) so that test suite
can continue without interrupts. It also means that after busy-poll
tests NIC will have those default settings, whereas right now it is left
with 9k MTU and xdp prog loaded in native mode.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-25-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a test that produces lots of nasty descriptors testing the corner
cases of the descriptor validation. Some of these descriptors are
valid and some are not as indicated by the valid flag. For a
description of all the test combinations, please see the code.
To stress the API, we need to be able to generate combinations of
descriptors that make little sense. A new verbatim mode is introduced
for the packet_stream to accomplish this. In this mode, all packets in
the packet_stream are sent as is. We do not try to chop them up into
frames that are of the right size that we know are going to work as we
would normally do. The packets are just written into the Tx ring even
if we know they make no sense.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # adjusted valid flags for frags
Link: https://lore.kernel.org/r/20230719132421.584801-22-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the first basic multi-buffer test that sends a stream of 9K
packets and validates that they are received at the other end. In
order to enable sending and receiving multi-buffer packets, code that
sets the MTU is introduced as well as modifications to the XDP
programs so that they signal that they are multi-buffer enabled.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-20-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add the ability to send and receive packets that are larger than the
size of a umem frame, using the AF_XDP /XDP multi-buffer
support. There are three pieces of code that need to be changed to
achieve this: the Rx path, the Tx path, and the validation logic.
Both the Rx path and Tx could only deal with a single fragment per
packet. The Tx path is extended with a new function called
pkt_nb_frags() that can be used to retrieve the number of fragments a
packet will consume. We then create these many fragments in a loop and
fill the N-1 first ones to the max size limit to use the buffer space
efficiently, and the Nth one with whatever data that is left. This
goes on until we have filled in at the most BATCH_SIZE worth of
descriptors and fragments. If we detect that the next packet would
lead to BATCH_SIZE number of fragments sent being exceeded, we do not
send this packet and finish the batch. This packet is instead sent in
the next iteration of BATCH_SIZE fragments.
For Rx, we loop over all fragments we receive as usual, but for every
descriptor that we receive we call a new validation function called
is_frag_valid() to validate the consistency of this fragment. The code
then checks if the packet continues in the next frame. If so, it loops
over the next packet and performs the same validation. once we have
received the last fragment of the packet we also call the function
is_pkt_valid() to validate the packet as a whole. If we get to the end
of the batch and we are not at the end of the current packet, we back
out the partial packet and end the loop. Once we get into the receive
loop next time, we start over from the beginning of that packet. This
so the code becomes simpler at the cost of some performance.
The validation function is_frag_valid() checks that the sequence and
packet numbers are correct at the start and end of each fragment.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-19-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Register the bpf_map_sum_elem_count func for all programs, and update the
map_ptr subtest of the test_progs test to test the new functionality.
The usage is allowed as long as the pointer to the map is trusted (when
using tracing programs) or is a const pointer to map, as in the following
example:
struct {
__uint(type, BPF_MAP_TYPE_HASH);
...
} hash SEC(".maps");
...
static inline int some_bpf_prog(void)
{
struct bpf_map *map = (struct bpf_map *)&hash;
__s64 count;
count = bpf_map_sum_elem_count(map);
...
}
Signed-off-by: Anton Protopopov <aspsk@isovalent.com>
Link: https://lore.kernel.org/r/20230719092952.41202-5-aspsk@isovalent.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in userspace_pm.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_sockopt.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in simult_flows.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in diag.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_join.sh selftest.
In this selftest and before starting each subtest, the 'reset' function
is called. We can then check if the previous test has passed, failed or
has been skipped from there.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in pm_netlink.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch formats subtests results in TAP in mptcp_connect.sh selftest.
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current selftests infrastructure formats the results in TAP 13. This
version doesn't support subtests and only the end result of each
selftest is taken into account. It means that a single issue in a
subtest of a selftest containing multiple subtests forces the whole
selftest to be marked as failed. It also means that subtests results are
not tracked by CIs executing selftests.
MPTCP selftests run hundreds of various subtests. It is then important
to track each of them and not one result per selftest.
It is particularly interesting to do that when validating stable kernels
with the last version of the test suite: tests might fail because a
feature is not supported but the test didn't skip that part. In this
case, if subtests are not tracked, the whole selftest will be marked as
failed making the other subtests useless because their results are
ignored.
This patch adds some helpers in mptcp_lib.sh to be able to easily format
subtests results in TAP in the different MPTCP selftests.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/368
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
In this selftest, "printf" is always used with "stdbuf".
With a new helper, it is possible to call "stdbuf" only from one place.
This makes the code a bit clearer to read.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
There are a few reasons to do that:
- When the tabs are not printed as 8 spaces, some results were not
properly aligned
- Some lines printing the test name were very long due to the use of a
lot of spaces/tabs at the end and stdbuf at the beginning.
- To reduce duplicated code, e.g. to print what has failed and set the
status
But by centralising how the test results are printed, this also prepares
future commits to avoid more duplicated code and ease the tracking of
the different subtests.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
shellcheck recently helped to find an issue where a wrong variable name
was used. It is then good to fix the other harmless issues in order to
spot "real" ones later.
Here, three categories of warnings are ignored:
- SC2317: Command appears to be unreachable. The cleanup() function is
invoke indirectly via the EXIT trap.
- SC2034: Variable appears unused. The check_expected_one() function
takes the name of the variable in argument but it ends up reading the
content: indirect usage.
- SC2086: Double quote to prevent globbing and word splitting. This is
recommended but the current usage is correct and there is no need to
do all these modifications to be compliant with this rule.
One error has been fixed with SC2181: Check exit code directly with e.g.
'if ! mycmd;', not indirectly with $?.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
No more tests were executed after a failure but it is still interesting
to get results for all the tests to better understand what's still OK
and what's not after a modification.
Now we only exit earlier if the two connections cannot be established.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
No more tests were executed after a failure but it is still interesting
to get results for all the tests to better understand what's still OK
and what's not after a modification.
Now we only exit earlier if the basic tests are failing: no ping going
through namespaces or unable to transfer data on the loopback interface.
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases for bridge backup port and backup nexthop ID, testing
both good and bad flows.
Example truncated output:
# ./test_bridge_backup_port.sh
[...]
Tests passed: 83
Tests failed: 0
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
