Cross-merge networking fixes after downstream PR.
No conflicts.
Adjacent changes:
kernel/bpf/verifier.c
829955981c ("bpf: Fix verifier log for async callback return values")
a923819fb2 ("bpf: Treat first argument as return value for bpf_throw")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the initramfs is embedded into the kernel each rebuild of it will
trigger a full kernel relink and all the expensive postprocessing steps.
Currently nolibc-test and therefore the initramfs are always rebuild,
even without source changes, leading to lots of slow kernel relinks.
Instead of linking the initramfs into the kernel assemble it manually
and pass it explicitly to qemu.
This avoids all of the kernel relinks.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Link: https://lore.kernel.org/r/20230917-nolibc-initramfs-v2-1-f0f293a8b198@weissschuh.net
Newer versions of glibc annotate the poll() function with
__attribute__(access) which triggers a compiler warning inside the
testcase poll_fault.
Avoid this by using a plain NULL which is enough for the testcase.
To avoid potential future warnings also adapt the other EFAULT
testcases, except select_fault as NULL is a valid value for its
argument.
nolibc-test.c: In function ‘run_syscall’:
nolibc-test.c:338:62: warning: ‘poll’ writing 8 bytes into a region of size 0 overflows the destination [-Wstringop-overflow=]
338 | do { if (!(cond)) result(llen, SKIPPED); else ret += expect_syserr2(expr, expret, experr1, experr2, llen); } while (0)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
nolibc-test.c:341:9: note: in expansion of macro ‘EXPECT_SYSER2’
341 | EXPECT_SYSER2(cond, expr, expret, experr, 0)
| ^~~~~~~~~~~~~
nolibc-test.c:905:47: note: in expansion of macro ‘EXPECT_SYSER’
905 | CASE_TEST(poll_fault); EXPECT_SYSER(1, poll((void *)1, 1, 0), -1, EFAULT); break;
| ^~~~~~~~~~~~
cc1: note: destination object is likely at address zero
In file included from /usr/include/poll.h:1,
from nolibc-test.c:33:
/usr/include/sys/poll.h:54:12: note: in a call to function ‘poll’ declared with attribute ‘access (write_only, 1, 2)’
54 | extern int poll (struct pollfd *__fds, nfds_t __nfds, int __timeout)
| ^~~~
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Some SoCs have firmware support to notify, if the system can't lower
power limit to a value requested from user space via RAPL constraints.
This test program waits for notification of power floor and prints. This
program can be used to test this feature and also allows other user space
programs to use as a reference.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Extend x86's state to forcefully load *all* host-supported xfeatures by
modifying xstate_bv in the saved state. Stuffing xstate_bv ensures that
the selftest is verifying KVM's full ABI regardless of whether or not the
guest code is successful in getting various xfeatures out of their INIT
state, e.g. see the disaster that is/was MPX.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Expand x86's state test to load XSAVE state into a "dummy" vCPU prior to
KVM_SET_CPUID2, and again with an empty guest CPUID model. Except for
off-by-default features, i.e. AMX, KVM's ABI for KVM_SET_XSAVE is that
userspace is allowed to load xfeatures so long as they are supported by
the host. This is a regression test for a combination of KVM bugs where
the state saved by KVM_GET_XSAVE{2} could not be loaded via KVM_SET_XSAVE
if the saved xstate_bv would load guest-unsupported xfeatures.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-5-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Modify support XSAVE state in the "state test's" guest code so that saving
and loading state via KVM_{G,S}ET_XSAVE actually does something useful,
i.e. so that xstate_bv in XSAVE state isn't empty.
Punt on BNDCSR for now, it's easier to just stuff that xfeature from the
host side.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20230928001956.924301-4-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When outputting the "new" register list we want to print all of the
new registers, decoding as much as possible of each of them. Also, we
don't want to assert while listing registers with '--list'. We output
"/* UNKNOWN */" after each new register (which we were already doing
for some), which should be enough.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We have a new conditional operations related ISA extensions so let us
add these extensions to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
We have a new smstateen registers as separate sub-type of CSR ONE_REG
interface so let us add these registers to get-reg-list test.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
Add a couple macros to use when filling arrays in order to ensure
the elements are placed in the right order, regardless of the
order we prefer to read them. And immediately apply the new
macro to resorting the ISA extension lists alphabetically.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Haibo Xu <haibo1.xu@intel.com>
Signed-off-by: Anup Patel <anup@brainfault.org>
These selftests are written in prog_tests style instead of adding
them to the existing test_sock_addr tests. Migrating the existing
sock addr tests to prog_tests style is left for future work. This
commit adds support for testing bind() sockaddr hooks, even though
there's no unix socket sockaddr hook for bind(). We leave this code
intact for when the INET and INET6 tests are migrated in the future
which do support intercepting bind().
Signed-off-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Link: https://lore.kernel.org/r/20231011185113.140426-10-daan.j.demeyer@gmail.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
For the hid-bpf tests to compile, we need to have the definition of
struct hid_bpf_ctx. This definition is an internal one from the kernel
and it is supposed to be defined in the generated vmlinux.h.
This vmlinux.h header is generated based on the currently running kernel
or if the kernel was already compiled in the tree. If you just compile
the selftests without compiling the kernel beforehand and you are running
on a 6.2 kernel, you'll end up with a vmlinux.h without the hid_bpf_ctx
definition.
Use the clever trick from tools/testing/selftests/bpf/progs/bpf_iter.h
to force the definition of that symbol in case we don't find it in the
BTF and also add __attribute__((preserve_access_index)) to further
support CO-RE functionality for these tests.
Signed-off-by: Justin Stitt <justinstitt@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com> # Build
Tested-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20230825-wip-selftests-v3-1-639963c54109@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
This patch extends the existing fib_lookup test suite by adding two test
cases (for each IP family):
* Test source IP selection from the egressing netdev.
* Test source IP selection when an IP route has a preferred src IP addr.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Link: https://lore.kernel.org/r/20231007081415.33502-3-m@lambda.lt
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Martin reported that on his local dev machine the test_tc_chain_mixed() fails as
"test_tc_chain_mixed:FAIL:seen_tc5 unexpected seen_tc5: actual 1 != expected 0"
and others occasionally, too.
However, when running in a more isolated setup (qemu in particular), it works fine
for him. The reason is that there is a small race-window where seen_tc* could turn
into true for various test cases when there is background traffic, e.g. after the
asserts they often get reset. In such case when subsequent detach takes place,
unrelated background traffic could have already flipped the bool to true beforehand.
Add a small helper tc_skel_reset_all_seen() to reset all bools before we do the ping
test. At this point, everything is set up as expected and therefore no race can occur.
All tc_{opts,links} tests continue to pass after this change.
Reported-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-7-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Simplify __assert_mprog_count() to remove the -ENOENT corner case as the
bpf_prog_query() now returns 0 when no bpf_mprog is attached. This also
allows to convert a few test cases from using raw __assert_mprog_count()
over to plain assert_mprog_count() helper.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-5-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Add a new test case which performs double query of the bpf_mprog through
libbpf API, but also via raw bpf(2) syscall. This is testing to gather
first the count and then in a subsequent probe the full information with
the program array without clearing passed structs in between.
# ./vmtest.sh -- ./test_progs -t tc_opts
[...]
./test_progs -t tc_opts
[ 1.398818] tsc: Refined TSC clocksource calibration: 3407.999 MHz
[ 1.400263] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x311fd336761, max_idle_ns: 440795243819 ns
[ 1.402734] clocksource: Switched to clocksource tsc
[ 1.426639] bpf_testmod: loading out-of-tree module taints kernel.
[ 1.428112] bpf_testmod: module verification failed: signature and/or required key missing - tainting kernel
#252 tc_opts_after:OK
#253 tc_opts_append:OK
#254 tc_opts_basic:OK
#255 tc_opts_before:OK
#256 tc_opts_chain_classic:OK
#257 tc_opts_chain_mixed:OK
#258 tc_opts_delete_empty:OK
#259 tc_opts_demixed:OK
#260 tc_opts_detach:OK
#261 tc_opts_detach_after:OK
#262 tc_opts_detach_before:OK
#263 tc_opts_dev_cleanup:OK
#264 tc_opts_invalid:OK
#265 tc_opts_max:OK
#266 tc_opts_mixed:OK
#267 tc_opts_prepend:OK
#268 tc_opts_query:OK <--- (new test)
#269 tc_opts_replace:OK
#270 tc_opts_revision:OK
Summary: 19/0 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20231006220655.1653-4-daniel@iogearbox.net
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Remove duplicate defines which are already defined in kernel headers and
re-definition isn't required.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Remove duplicate defines which are already included in kernel headers.
MAX_PID_NS_LEVEL macro is used inside kernel only. It isn't exposed to
userspace. So it is never defined in test application. Remove #ifndef in
this case.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
These duplicate defines should automatically be picked up from kernel
headers. Use KHDR_INCLUDES to add kernel header files.
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
We currently expect up to a three-digit number of tests and subtests, so:
#999/999: some_test/some_subtest: ...
Is the largest test/subtest we can see. If we happen to cross into
1000s, current logic will just truncate everything after 7th character.
This patch fixes this truncate and allows to go way higher (up to 31
characters in total). We still nicely align test numbers:
#60/66 core_reloc_btfgen/type_based___incompat:OK
#60/67 core_reloc_btfgen/type_based___fn_wrong_args:OK
#60/68 core_reloc_btfgen/type_id:OK
#60/69 core_reloc_btfgen/type_id___missing_targets:OK
#60/70 core_reloc_btfgen/enumval:OK
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20231006175744.3136675-3-andrii@kernel.org
Add support for building selftests with -O2 level of optimization, which
allows more compiler warnings detection (like lots of potentially
uninitialized usage), but also is useful to have a faster-running test
for some CPU-intensive tests.
One can build optimized versions of libbpf and selftests by running:
$ make RELEASE=1
There is a measurable speed up of about 10 seconds for me locally,
though it's mostly capped by non-parallelized serial tests. User CPU
time goes down by total 40 seconds, from 1m10s to 0m28s.
Unoptimized build (-O0)
=======================
Summary: 430/3544 PASSED, 25 SKIPPED, 4 FAILED
real 1m59.937s
user 1m10.877s
sys 3m14.880s
Optimized build (-O2)
=====================
Summary: 425/3543 PASSED, 25 SKIPPED, 9 FAILED
real 1m50.540s
user 0m28.406s
sys 3m13.198s
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20231006175744.3136675-2-andrii@kernel.org
CONFIG_VSOCKETS is required by BPF selftests, otherwise we get errors
like this:
./test_progs:socket_loopback_reuseport:386: socket:
Address family not supported by protocol
socket_loopback_reuseport:FAIL:386
./test_progs:vsock_unix_redir_connectible:1496:
vsock_socketpair_connectible() failed
vsock_unix_redir_connectible:FAIL:1496
So this patch enables it in tools/testing/selftests/bpf/config.
Signed-off-by: Geliang Tang <geliang.tang@suse.com>
Link: https://lore.kernel.org/r/472e73d285db2ea59aca9bbb95eb5d4048327588.1696490003.git.geliang.tang@suse.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Zero-initialize the entire test_result structure used by memslot_perf_test
instead of zeroing only the fields used to guard the pr_info() calls.
gcc 13.2.0 is a bit overzealous and incorrectly thinks that rbestslottime's
slot_runtime may be used uninitialized.
In file included from memslot_perf_test.c:25:
memslot_perf_test.c: In function ‘main’:
include/test_util.h:31:22: error: ‘rbestslottime.slot_runtime.tv_nsec’ may be used uninitialized [-Werror=maybe-uninitialized]
31 | #define pr_info(...) printf(__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~
memslot_perf_test.c:1127:17: note: in expansion of macro ‘pr_info’
1127 | pr_info("Best slot setup time for the whole test area was %ld.%.9lds\n",
| ^~~~~~~
memslot_perf_test.c:1092:28: note: ‘rbestslottime.slot_runtime.tv_nsec’ was declared here
1092 | struct test_result rbestslottime;
| ^~~~~~~~~~~~~
include/test_util.h:31:22: error: ‘rbestslottime.slot_runtime.tv_sec’ may be used uninitialized [-Werror=maybe-uninitialized]
31 | #define pr_info(...) printf(__VA_ARGS__)
| ^~~~~~~~~~~~~~~~~~~
memslot_perf_test.c:1127:17: note: in expansion of macro ‘pr_info’
1127 | pr_info("Best slot setup time for the whole test area was %ld.%.9lds\n",
| ^~~~~~~
memslot_perf_test.c:1092:28: note: ‘rbestslottime.slot_runtime.tv_sec’ was declared here
1092 | struct test_result rbestslottime;
| ^~~~~~~~~~~~~
That can't actually happen, at least not without the "result" structure in
test_loop() also being used uninitialized, which gcc doesn't complain
about, as writes to rbestslottime are all-or-nothing, i.e. slottimens can't
be non-zero without slot_runtime being written.
if (!data->mem_size &&
(!rbestslottime->slottimens ||
result.slottimens < rbestslottime->slottimens))
*rbestslottime = result;
Zero-initialize the structures to make gcc happy even though this is
likely a compiler bug. The cost to do so is negligible, both in terms of
code and runtime overhead. The only downside is that the compiler won't
warn about legitimate usage of "uninitialized" data, e.g. the test could
end up consuming zeros instead of useful data. However, given that the
test is quite mature and unlikely to see substantial changes, the odds of
introducing such bugs are relatively low, whereas being able to compile
KVM selftests with -Werror detects issues on a regular basis.
Reviewed-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Link: https://lore.kernel.org/r/20231005002954.2887098-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Currently the nsleep-lat test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the posix_timers test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
As part of this fix the printing of diagnostics in the unlikely event that
the pthread APIs fail, these were using perror() but the API functions
directly return an error code instead of setting errno.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Currently the execveat test does not produce KTAP output but rather a
custom format. This means that we only get a pass/fail for the suite, not
for each individual test that the suite does. Convert to using the standard
kselftest output functions which result in KTAP output being generated.
The main trick with this is that, being an exec() related test, the
program executes itself and returns specific exit codes to verify
success meaning that we need to only use the top level kselftest
header/summary functions when invoked directly rather than when run as
part of a test.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
